[MPlayer-users] Re: New MOBO chipset SiS 748 and nonworking vidix
Andrzej Nikitorowicz
andyn at konto.pl
Sun Apr 25 20:04:24 CEST 2004
adland adland123 at yahoo.com
Wed Apr 21 00:56:50 CEST 2004
> maybe you could run a test
> uncomment the debugging printf statements in the
> libdha/pci.c code for pci_scan function.
> rebuild
> reinstall this library
> re run your test with hopefully now more debugging output.
> this will help in seeing more about what is happening.
Please foregive me my english. I hope you understand me.
Dubug is nothing help (same less information output, like before
without debugging). Maybe libdha/pci.c is to old:
(XFree86 3.3.3 scanpci.c, modified for GATOS/win/gfxdump
XFree86: xc/programs/Xserver/hw/xfree86/etc/scanpci.c,v
3.34.2.17 1998/11/10 11:55:40 dawes Exp)
^^^^^^^^^^^^^^^^^^^ !!!! for new MoBos?
lspci and scanpci can scan PCI bus and can find all pci devices.
Again - what libdha/pci.c (code for pci_scan function) search, scan:
PCI bus, PCI devices, AGP port, VGA videocard ???
################################## scanpci -v:
pci bus 0x0 cardnum 0x00 function 0x0000: vendor 0x1039 device 0x0746
SiS Device unknown
CardVendor 0x1849 card 0x0746 (Card unknown)
STATUS 0x2210 COMMAND 0x0007
CLASS 0x06 0x00 0x00 REVISION 0x10
pci bus 0x0 cardnum 0x01 function 0x0000: vendor 0x1039 device 0x0002
SiS SG86C202
STATUS 0x0000 COMMAND 0x0107
CLASS 0x06 0x04 0x00 REVISION 0x00
HEADER 0x01 LATENCY 0x20
PRIBUS 0x00 SECBUS 0x01 SUBBUS 0x02 SECLT 0x20
IOBASE 0x9000 IOLIM 0x9fff SECSTATUS 0x2000
NOPREFETCH_MEMBASE 0xcfd00000 MEMLIM 0xcfefffff
PREFETCH_MEMBASE 0xbfa00000 MEMLIM 0xcfbfffff
NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT VGA_EN NO_ISA_EN NO_PERR_EN
(...)
pci bus 0x1 cardnum 0x00 function 0x0000: vendor 0x1002 device 0x5157
ATI Device unknown
CardVendor 0x17af card 0x2002 (Card unknown)
STATUS 0x02b0 COMMAND 0x0187
CLASS 0x03 0x00 0x00 REVISION 0x00
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08
BASE0 0xc0000008 addr 0xc0000000 MEM PREFETCHABLE
BASE1 0x00009801 addr 0x00009800 I/O
BASE2 0xcfef0000 addr 0xcfef0000 MEM
BASEROM 0xcfec0000 addr 0xcfec0000 not-decode-enabled
MAX_LAT 0x00 MIN_GNT 0x08 INT_PIN 0x01 INT_LINE 0x0b
PCI: Probing config type using method 1
PCI: Config type is 1
PCI: PCI scan (all values are in hex)
PCI: 00:00:0: chip 1039,0746 card 1849,0746 rev 10 class 06,00,00 hdr
00
PCI: 00:01:0: chip 1039,0002 card 0000,0000 rev 00 class 06,04,00 hdr
01
PCI: 00:02:0: chip 1039,0964 card 0000,0000 rev 36 class 06,01,00 hdr
80
PCI: 00:02:5: chip 1039,5513 card 1849,5513 rev 01 class 01,01,80 hdr
00
PCI: 00:02:7: chip 1039,7012 card 1849,7012 rev a0 class 04,01,00 hdr
00
PCI: 00:03:0: chip 1039,7001 card 1849,7001 rev 0f class 0c,03,10 hdr
80
PCI: 00:03:1: chip 1039,7001 card 1849,7001 rev 0f class 0c,03,10 hdr
00
PCI: 00:03:2: chip 1039,7001 card 1849,7001 rev 0f class 0c,03,10 hdr
00
PCI: 00:04:0: chip 1039,0900 card 1849,8201 rev 90 class 02,00,00 hdr
00
PCI: 00:09:0: chip 109e,036e card 0000,0000 rev 11 class 04,00,00 hdr
80
PCI: 00:09:1: chip 109e,0878 card 0000,0000 rev 11 class 04,80,00 hdr
80
PCI: 00:0b:0: chip 1102,0002 card 1102,8067 rev 0a class 04,01,00 hdr
80
PCI: 00:0b:1: chip 1102,7002 card 1102,0020 rev 0a class 09,80,00 hdr
80
PCI: 01:00:0: chip 1002,5157 card 17af,2002 rev 00 class 03,00,00 hdr
00
PCI: End of PCI scan
################################# lspci -v
00:00.0 Host bridge: Silicon Integrated Systems [SiS]: Unknown device
0746 (rev 10)
Subsystem: Unknown device 1849:0746
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=02, sec-latency=32
I/O behind bridge: 00009000-00009fff
Memory behind bridge: cfd00000-cfefffff
Prefetchable memory behind bridge: bfa00000-cfbfffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
(...)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV200
QW [Radeon 7500] (prog-if 00 [VGA])
Subsystem: Hightech Information System Ltd.: Unknown device 2002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 9800 [size=256]
Region 2: Memory at cfef0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at cfec0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
--
------------------------
Jeszcze lepsza oferta AlphaNet
- nowe serwery wirtualne
- nowy sklep internetowy
- nowy wirtualny administrator
Sprawdz www.alpha.pl
------------------------
More information about the MPlayer-users
mailing list