[MEncoder-users] Audio/Video Sync Issue
llarevo at gmx.net
llarevo at gmx.net
Sat Jun 30 16:38:39 CEST 2012
> I have the same problems with dvb-t-captureing using the 1.1 release as
> reported by Linux <linux at thehoytfamily.com> on 2012-06-01. The problem
> occured the first time when upgrading to Fedora 16. MPlayer-1.0rc4 is
> working well in F16, but i couldn't get it to compile in F17.
>
> There seams to be some issue with the detection of duplicate frames. The
> output of the 1.1 release while capturing is
>
> http://pastebin.com/TfRvWpFp
>
> Every 10th frame is marked as duplicate, the framrate remains at about
> 22 fps.
>
> For comparison the output of an older working mencoder release is
>
> http://pastebin.com/p8nQLGEx
>
> After 102 frames there are no more duplicate frames and the framerate
> rises to 25 fps.
>
> I tried the options
>
> mpegopts=format=dvdmpeg2:tsaf=1:vframerate=25:muxrate=10000:vbitrate=10000
> noskip=1
> fps=25
> ofps=25
> mc=0
> vf=softskip,harddup
>
> in different combinations, none worked. What to do next? Can anybody
> help?
In addition to my questions above I want to give a sample command
showing the error:
mencoder dvb://1@ard -o capture.mpeg -of mpeg -mpegopts format=dvd:tsaf
-oac copy -ovc copy
Attached you find the channels.conf and the mencoder.conf
Additionally, I tried some regression testing (cf.
http://www.mplayerhq.hu/DOCS/HTML/en/bugreports_regression_test.html)
but without any luck. I cannot find any checkoutdate with some source
that compiles. All the stuff I check out since Jan, 1st 2011 fails at
different points. I tried disabling a lot of mplayer features for a lots
of days.
Since I'm not a developer I'm a bit frustrated now:
1. With current releases dvb-capturing isn't possible anymore for me.
2. I'don't find a compiling releasedate for regression tests.
3. I don't get any response to my questions above.
4. I don't find any information in http://bugzilla.mplayerhq.hu
Am I actually the only one with the dvb-capturing-problems mentioned
above? If so, what am I doing wrong? Is this the correct mailing-list?
If not, please tell me where to discuss the problem. What am I doing
wrong with my regression tests? What is the needed setup to quickly
compile and test different source stands?
I am stuck. Please help.
Thanks
--
Felix
-------------- next part --------------
zdf:514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:545:546:514
3sat:514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:561:562:515
zdfneo:514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:593:594:517
zdfinfokanal:514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:577:578:516
rtl:538000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:337:338:16405
rtl2:538000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:353:354:16406
superrtl:538000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:433:434:16411
vox:538000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:545:546:16418
cnn:594000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:97:98:16390
viva:594000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:513:514:16416
eurosport:594000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:577:578:16420
tele5:594000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:465:466:16413
mdr:698000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:4657:4658:100
ndr:698000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:4641:4642:129
swr:698000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:4673:4674:226
wdr:698000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:4625:4626:262
arte:706000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:4385:4386:2
phoenix:706000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:4401:4402:3
einsfestival:706000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:4417:4418:5
ard:706000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:4369:4370:256
sat1:730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:385:386:16408
pro7:730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:305:306:16403
kabel1:730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:161:162:16394
n24:730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:225:226:16398
-------------- next part --------------
# Write your default config options here!
tv=driver=v4l2:width=720:height=576:fps=25:outfmt=yv12:alsa=1:immediatemode=0:volume=100:channels=175250-ard,182250-zdf,189250-wdr,335250-dasvierte,280250-centertv,140250-nrwtv,303250-br,471250-ndr,168250-swr,203250-kika,217250-phoenix,294250-arte,210250-dreisat,154250-sat1,147250-rtl,287250-rtl2,259250-superrtl,231250-pro7,266250-kabel1,273250-n24,196250-vox,311250-tele5,224250-ntv,503250-dmax,238250-viva,319250-dsf,245250-eurosport,252250-cnn,487250-rtlshop,161250-qvc,479250-hse24,327250-123tv
[saa7134]
profile-desc="Settings for mpeg2-capture with Terratec Cinergy 400"
tv=device=/dev/video0:input=0:adevice=hw.SAA7134:audiorate=32000:amode=1
vf=harddup=1
af=lavcresample=48000
srate=48000
oac=lavc=1
ovc=lavc=1
lavcopts=vcodec=mpeg2video:vrc_buf_size=1835:vrc_maxrate=8000:vbitrate=5000:vmax_b_frames=2:keyint=12:vstrict=0:ildct=1:acodec=mp2:abitrate=224:aspect=4/3
of=mpeg=1
mpegopts=format=dvd:tsaf=1:vbitrate=5000
ofps=25
msglevel=all=4
[em28xx]
profile-desc="Settings for mpeg2-capture with em28xx"
tv=device=/dev/video0:input=0:adevice=hw.Em28xxAudio:audiorate=32000:amode=1
vf=harddup=1
af=lavcresample=48000
srate=48000
oac=lavc=1
ovc=lavc=1
lavcopts=vcodec=mpeg2video:vrc_buf_size=1835:vrc_maxrate=8000:vbitrate=5000:vmax_b_frames=2:keyint=12:vstrict=0:ildct=1:acodec=mp2:abitrate=224:aspect=4/3
of=mpeg=1
mpegopts=format=dvd:tsaf=1:vbitrate=5000
ofps=25
msglevel=all=4
[dvb-t]
profile-desc="Settings for mpeg2-capture with dvb-t-cards"
of=mpeg=1
mpegopts=format=dvd:tsaf=1:vframerate=25:muxrate=10000:vbitrate=10000
oac=copy=1
ovc=copy=1
vf=harddup=1
msglevel=all=4
fps=25
ofps=25
[dvb-c]
profile-desc="Settings for mpeg2-capture with dvb-c-cards"
of=mpeg=1
mpegopts=format=dvd:tsaf=1
oac=copy=1
ovc=copy=1
#ofps=25
msglevel=all=4
[dvb-t-old1]
#mencoder -of mpeg -mpegopts format=dvd:tsaf:drop -oac copy -ovc copy -o $VIDEOPATH"/capture_`/bin/date +%y%m%d_%H%M%S`_`sed -n -e 's/^#\([0-9]\{1,\}\)/\1/p' $RECPATH"/cap_"$2"_"$1"_"$3"_"$4"_"$7".sh"`.mpg" dvb://1@"$4" -endpos $3 -msglevel all=-1 -really-quiet
[dvb-t-old2]
#mencoder -of mpeg -mpegopts format=dvd:tsaf:vbitrate=8000:muxrate=8000 -oac copy -ovc copy -noskip -vf harddup -o $VIDEOPATH"/capture_`/bin/date +%y%m%d_%H%M%S`_`sed -n -e '/\/.*/d;s/#//;/^[0-9]*/p' $RECPATH"/cap_"$2"_"$1"_"$3"_"$4".sh"`.mpg" dvb://$4 -endpos $3 -msglevel all=-1 -really-quiet
More information about the MEncoder-users
mailing list