[MPlayer-users] VO: Description: Null video output

Craig Jameson cjarith at comcast.net
Sat Mar 26 03:42:39 EET 2022


In two separate blocks below, I have posted the outputs for

	mplayer -vo help
and
	mplayer -v Metallica\ -\ Nothing\ Else\ Matters.mp4

for the same user, but while running two different versions mplayer
under two different versions of RHEL.


The file .mplayer/config for this user contains a single line:

	# Write your default config options here!


My video card is nvidia.  The info about it from lspci is in my last
post (at the bottom of this post).

Now that you have explained a few things, I do not think I have an
mplayer driver for my video card.

With and without any of the command line -vo options, I get essentially
the same result.  In what is posted below, I did not use them.

The version of   mplayer   that   works under RHEL 7 is 1.1-4.4.7
The version I am trying to get to work  under RHEL 8 is 1.5-8

The VO for the first version is reported to be Xv.

./configure for the two versions was run with the following options:

1.1-4.4.7
 --enable-gui --codecsdir=/home/inatps/MPlayer/essential-2007100 --
prefix=/home/inatps/MPlayer/MPlayer2013 --yasm=

1.5-8
--prefix=/home/inatps/MPlayer/MPlayer-1.5/local --
codecsdir=/home/inatps/MPlayer/MPlayer-1.5/essential-20071007

The permissions for the two installs are the same.

At first, I thought the problem was an operating system permissions
issue.  After some research, I thought is was a security issue with
ffmpeg.  Now, I am of the sense it is a compile-time issue.  I remember
that there is a compile-time log.  Is that where I look next?  Where do
I find it again?

Craig.


**************************************************************
//////////////////////////////////////////////////////////////
**************************************************************
These two outputs of mplayer are from a binary compiled under RHEL 6,
running under RHEL 7.

[Salomon]$ mplayer -vo help
MPlayer 1.1-4.4.7 (C) 2000-2012 MPlayer Team
Available video output drivers:
        xv      X11/Xv
        gl_nosw OpenGL no software rendering
        x11     X11 ( XImage/Shm )
        xover   General X11 driver for overlay capable video output
drivers
        sdl     SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!)
        gl      OpenGL
        gl2     X11 (OpenGL) - multiple textures version
        fbdev   Framebuffer Device
        fbdev2  Framebuffer Device
        matrixview      MatrixView (OpenGL)
        v4l2    V4L2 MPEG Video Decoder Output
        xvidix  X11 (VIDIX)
        cvidix  console VIDIX
        null    Null video output
        mpegpes MPEG-PES to DVB card
        yuv4mpeg        yuv4mpeg output for mjpegtools
        png     PNG file
        jpeg    JPEG file
        tga     Targa output
        pnm     PPM/PGM/PGMYUV file
        md5sum  md5sum of each frame
        mng     MNG file



[Salomon]$ mplayer -v Metallica\ -\ Nothing\ Else\ Matters.mp4
MPlayer 1.1-4.4.7 (C) 2000-2012 MPlayer Team
CPU vendor name: GenuineIntel  max cpuid level: 22
CPU: Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz (Family: 6, Model: 158,
Stepping: 9)
extended cpuid-level: 8
extended cache-info: 16801856
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNowExt: 0 SSE: 1 SSE2: 1 SSSE3: 1
Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2 CMOV
get_path('codecs.conf') -> '/home/public/.mplayer/codecs.conf'
Reading optional codecs config file /home/public/.mplayer/codecs.conf:
No such file or directory
Reading optional codecs config file
/home/inatps/MPlayer/MPlayer2013/etc/mplayer/codecs.conf: No such file
or directory
Using built-in default codecs.conf.
init_freetype
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
get_path('fonts') -> '/home/public/.mplayer/fonts'
Configuration: --enable-gui --codecsdir=/home/inatps/MPlayer/essential-
2007100 --prefix=/home/inatps/MPlayer/MPlayer2013 --yasm=
CommandLine: '-v' 'Metallica - Nothing Else Matters.mp4'
Using nanosleep() timing
get_path('input.conf') -> '/home/public/.mplayer/input.conf'
Reading optional input config file /home/public/.mplayer/input.conf: No
such file or directory
Reading optional input config file
/home/inatps/MPlayer/MPlayer2013/etc/mplayer/input.conf: No such file
or directory
Falling back on default (hardcoded) input config
get_path('Metallica - Nothing Else Matters.mp4.conf') ->
'/home/public/.mplayer/Metallica - Nothing Else Matters.mp4.conf'

Playing Metallica - Nothing Else Matters.mp4.
get_path('sub/') -> '/home/public/.mplayer/sub/'
[file] File size is 14488239 bytes
STREAM: [file] Metallica - Nothing Else Matters.mp4
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
libavformat version 54.6.100 (internal)
Configuration: --enable-gpl --enable-postproc
LAVF_check: QuickTime/MPEG-4/Motion JPEG 2000 format
libavformat file format detected.
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xecbec0]ISO: File Type Major Brand: mp42
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xecbec0]File position before
avformat_find_stream_info() is 92151
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xecbec0]All info found
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xecbec0]File position after
avformat_find_stream_info() is 107627
==> Found video stream: 0
======= VIDEO Format ======
  biSize 82
  biWidth 640
  biHeight 360
  biPlanes 0
  biBitCount 24
  biCompression 875967048='H264'
  biSizeImage 691200
Unknown extra header dump: [1] [42] [c0] [1e] [ff] [e1] [0] [1b] [67]
[42] [c0] [1e] [da] [2] [80] [bf] [e5] [c0] [5a] [80] [80] [80] [a0]
[0] [0] [3] [0] [20] [0] [0] [6] [41] [e2] [c5] [d4] [1] [0] [4] [68]
[ce] [3c] [80]
===========================
[lavf] stream 0: video (h264), -vid 0
==> Found audio stream: 1
======= WAVE Format =======
Format Tag: 20557 (0x504D)
Channels: 2
Samplerate: 44100
avg byte/sec: 11999
Block align: 1
bits/sample: 16
cbSize: 16
Unknown extra header dump: [12] [10] [0] [0] [0] [0] [0] [0] [0] [0]
[0] [0] [0] [0] [0] [0]
=======================================================================
===
[lavf] stream 1: audio (aac), -aid 0, -alang und
LAVF: 1 audio and 1 video streams found
LAVF: build 3540580
VIDEO:  [H264]  640x360  24bpp  25.000 fps  280.9 kbps (34.3 kbyte/s)
[V]
filefmt:44  fourcc:0x34363248  size:640x360  fps:25.000  ftime:=0.0400
Clip info:
 major_brand: mp42
 minor_version: 0
 compatible_brands: isommp42
 creation_time: 2019-12-15 10:24:23
Load subtitles in ./
get_path('sub/') -> '/home/public/.mplayer/sub/'
X11 opening display: :0
vo: X11 color mask:  FFFFFF  (R:FF0000 G:FF00 B:FF)
vo: X11 running at 1920x1080 with depth 24 and 32 bpp (":0" => local
display)
[x11] Detected wm supports NetWM.
[x11] Detected wm supports FULLSCREEN state.
[x11] Detected wm supports ABOVE state.
[x11] Detected wm supports BELOW state.
[x11] Current fstype setting honours FULLSCREEN ABOVE BELOW X atoms
[VO_XV] Using Xv Adapter #0 (GLAMOR Textured Video)
[xv common] Drawing no colorkey.
[xv common] Maximum source image dimensions: 8192x8192
=======================================================================
===
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 54.23.100 (internal)
Configuration: --enable-gpl --enable-postproc
INFO: libavcodec init OK!
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
=======================================================================
===
=======================================================================
===
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
dec_audio: Allocating 1536000 + 131072 = 1667072 bytes for output
buffer.
FFmpeg's libavcodec audio codec
INFO: libavcodec "aac" init OK!
AUDIO: 44100 Hz, 2 ch, s16le, 96.0 kbit/6.80% (ratio: 11999->176400)
Selected audio codec: [ffaac] afm: ffmpeg (FFmpeg AAC (MPEG-2/MPEG-4
Audio))
=======================================================================
===
Building audio filter chain for 44100Hz/2ch/s16le -> 0Hz/0ch/??...
[libaf] Adding filter dummy
[dummy] Was reinitialized: 44100Hz/2ch/s16le
[dummy] Was reinitialized: 44100Hz/2ch/s16le
Trying every known audio driver...
ao2: 44100 Hz  2 chans  s16le
audio_setup: using '/dev/dsp' dsp device
audio_setup: using '/dev/mixer' mixer device
audio_setup: using 'pcm' mixer device
[AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or
directory
alsa-init: requested format: 44100 Hz, 2 channels, 9
alsa-init: using ALSA 1.1.6
alsa-init: setup for 1/2 channel(s)
alsa-init: using device default
alsa-init: opening device in blocking mode
alsa-init: device reopened in blocking mode
alsa-init: got buffersize=88200
alsa-init: got period size 1378
alsa: 44100 Hz/2 channels/4 bpf/88200 bytes buffer/Signed 16 bit Little
Endian
AO: [alsa] 44100Hz 2ch s16le (2 bytes per sample)
AO: Description: ALSA-0.9.x-1.x audio output
AO: Author: Alex Beregszaszi, Zsolt Barat <joy at streamminister.de>
AO: Comment: under development
Building audio filter chain for 44100Hz/2ch/s16le ->
44100Hz/2ch/s16le...
[dummy] Was reinitialized: 44100Hz/2ch/s16le
[dummy] Was reinitialized: 44100Hz/2ch/s16le
Starting playback...
Increasing filtered audio buffer size from 0 to 90240
Unsupported PixelFormat 61
Unsupported PixelFormat 53
Unsupported PixelFormat 81
[ffmpeg] aspect_ratio: 1.777778
VDec: vo config request - 640 x 360 (preferred colorspace: Planar YV12)
Trying filter chain: vo
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO Config (640x360->640x360,flags=0,'MPlayer',0x32315659)
VO: [xv] 640x360 => 640x360 Planar YV12
VO: Description: X11/Xv
VO: Author: Gerd Knorr <kraxel at goldbach.in-berlin.de> and others
Xvideo image format: 0x32315659 (YV12) planar
Xvideo image format: 0x30323449 (I420) planar
using Xvideo port 183 for hw scaling
*** [vo] Exporting mp_image_t, 640x360x12bpp YUV planar, 345600 bytes
Unicode font: 5179 glyphs.
Unicode font: 5179 glyphs.
A: 160.2 V: 160.2 A-V:  0.000 ct:  0.040   0/  0  9%  0%  0.5% 0 0
Uninit audio filters...
[libaf] Removing filter dummy
Uninit audio: ffmpeg
Uninit video: ffmpeg
alsa-uninit: pcm closed
vo: uninit ...

Exiting... (Quit)




**************************************************************
//////////////////////////////////////////////////////////////
**************************************************************
These two outputs of mplayer are from the fresh compile under RHEL 8.5.


[Salomon]$ nmplayer -vo help
MPlayer 1.5-8 (C) 2000-2022 MPlayer Team
Available video output drivers:
        fbdev   Framebuffer Device
        fbdev2  Framebuffer Device
        v4l2    V4L2 MPEG Video Decoder Output
        cvidix  console VIDIX
        null    Null video output
        mpegpes MPEG-PES to DVB card
        yuv4mpeg        yuv4mpeg output for mjpegtools
        png     PNG file
        tga     Targa output
        pnm     PPM/PGM/PGMYUV file
        md5sum  md5sum of each frame



[Salomon]$ nmplayer -v Metallica\ -\ Nothing\ Else\ Matters.mp4
MPlayer 1.5-8 (C) 2000-2022 MPlayer Team
CPU vendor name: GenuineIntel  max cpuid level: 22
CPU: Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz (Family: 6, Model: 158,
Stepping: 9)
extended cpuid-level: 8
extended cache-info: 16801856
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNowExt: 0 SSE: 1 SSE2: 1 SSE3: 1
SSSE3: 1 SSE4: 1 SSE4.2: 1 AVX: 1
Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2 SSE3 SSSE3 SSE4
SSE4.2 AVX CMOV
get_path('codecs.conf') -> '/home/public/.mplayer/codecs.conf'
Reading optional codecs config file /home/public/.mplayer/codecs.conf:
No such file or directory
Reading optional codecs config file /home/inatps/MPlayer/MPlayer-
1.5/local/etc/mplayer/codecs.conf: No such file or directory
Using built-in default codecs.conf.
get_path('font/font.desc') -> '/home/public/.mplayer/font/font.desc'
font: can't open file: /home/public/.mplayer/font/font.desc
font: can't open file: /home/inatps/MPlayer/MPlayer-
1.5/local/share/mplayer/font/font.desc
Using SSE2 Optimized OnScreenDisplay
Configuration: --prefix=/home/inatps/MPlayer/MPlayer-1.5/local --
codecsdir=/home/inatps/MPlayer/MPlayer-1.5/essential-20071007
CommandLine: '-v' 'Metallica - Nothing Else Matters.mp4'
Using nanosleep() timing
get_path('input.conf') -> '/home/public/.mplayer/input.conf'
Reading optional input config file /home/public/.mplayer/input.conf: No
such file or directory
Reading optional input config file /home/inatps/MPlayer/MPlayer-
1.5/local/etc/mplayer/input.conf: No such file or directory
Falling back on default (hardcoded) input config
get_path('Metallica - Nothing Else Matters.mp4.conf') ->
'/home/public/.mplayer/Metallica - Nothing Else Matters.mp4.conf'

Playing Metallica - Nothing Else Matters.mp4.
get_path('sub/') -> '/home/public/.mplayer/sub/'
[file] File size is 14488239 bytes
STREAM: [file] Metallica - Nothing Else Matters.mp4
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
libavformat version 59.17.102 (internal)
Configuration: --enable-gpl --enable-postproc
LAVF_check: QuickTime / MOV
libavformat file format detected.
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x5581d81e7f40]ISO: File Type Major Brand:
mp42
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x5581d81e7f40]Unknown dref type 0x206c7275
size 12
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x5581d81e7f40]Unknown dref type 0x206c7275
size 12
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x5581d81e7f40]Protocol name not provided,
cannot determine if input is local or a network protocol, buffers and
access patterns cannot be configured optimally without knowing the
protocol
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x5581d81e7f40]Before
avformat_find_stream_info() pos: 92151 bytes read:98304 seeks:0
nb_streams:2
[h264 @ 0x5581d8215580]nal_unit_type: 7(SPS), nal_ref_idc: 3
[h264 @ 0x5581d8215580]nal_unit_type: 8(PPS), nal_ref_idc: 3
[h264 @ 0x5581d8215580]nal_unit_type: 7(SPS), nal_ref_idc: 3
[h264 @ 0x5581d8215580]nal_unit_type: 8(PPS), nal_ref_idc: 3
[h264 @ 0x5581d8215580]nal_unit_type: 6(SEI), nal_ref_idc: 0
[h264 @ 0x5581d8215580]nal_unit_type: 5(IDR), nal_ref_idc: 3
[h264 @ 0x5581d8215580]Format yuv420p chosen by get_format().
[h264 @ 0x5581d8215580]Reinit context to 640x368, pix_fmt: yuv420p
[h264 @ 0x5581d8215580]nal_unit_type: 1(Coded slice of a non-IDR
picture), nal_ref_idc: 2
[h264 @ 0x5581d8215580]nal_unit_type: 1(Coded slice of a non-IDR
picture), nal_ref_idc: 2
[h264 @ 0x5581d8215580]nal_unit_type: 1(Coded slice of a non-IDR
picture), nal_ref_idc: 2
[h264 @ 0x5581d8215580]nal_unit_type: 1(Coded slice of a non-IDR
picture), nal_ref_idc: 2
[h264 @ 0x5581d8215580]nal_unit_type: 1(Coded slice of a non-IDR
picture), nal_ref_idc: 2
[h264 @ 0x5581d8215580]nal_unit_type: 1(Coded slice of a non-IDR
picture), nal_ref_idc: 2
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x5581d81e7f40]All info found
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x5581d81e7f40]After
avformat_find_stream_info() pos: 107627 bytes read:131072 seeks:0
frames:13
==> Found video stream: 0
======= VIDEO Format ======
  biSize 82
  biWidth 640
  biHeight 360
  biPlanes 1
  biBitCount 24
  biCompression 875967048='H264'
  biSizeImage 691200
Unknown extra header dump: [1] [42] [c0] [1e] [ff] [e1] [0] [1b] [67]
[42] [c0] [1e] [da] [2] [80] [bf] [e5] [c0] [5a] [80] [80] [80] [a0]
[0] [0] [3] [0] [20] [0] [0] [6] [41] [e2] [c5] [d4] [1] [0] [4] [68]
[ce] [3c] [80]
===========================
[lavf] stream 0: video (h264), -vid 0
==> Found audio stream: 1
======= WAVE Format =======
Format Tag: 20557 (0x504D)
Channels: 2
Samplerate: 44100
avg byte/sec: 11999
Block align: 1
bits/sample: 16
cbSize: 16
Unknown extra header dump: [12] [10] [0] [0] [0] [0] [0] [0] [0] [0]
[0] [0] [0] [0] [0] [0]
=======================================================================
===
[lavf] stream 1: audio (aac), -aid 0, -alang und
LAVF: 1 audio and 1 video streams found
LAVF: build 3871078
VIDEO:  [H264]  640x360  24bpp  25.000 fps  280.9 kbps (34.3 kbyte/s)
[V]
filefmt:44  fourcc:0x34363248  size:640x360  fps:25.000  ftime:=0.0400
using /dev/fb0
Can't open /dev/fb0: Permission denied
[fbdev2] Using device /dev/fb0
[fbdev2] Can't open /dev/fb0: Permission denied
VO: [v4l2] No such file or directory
vo_cvidix: No vidix driver name provided, probing available ones (-v
option for details)!
[vidixlib] PROBING: cyberblade
[cyberblade] Error occurred during pci scan: Operation not permitted
[vidixlib] PROBING: mach64
[mach64] Error occurred during pci scan: Operation not permitted
[vidixlib] PROBING: mga
[mga] probe
[mga] Error occurred during pci scan: Operation not permitted
[vidixlib] PROBING: mga_crtc2
[mga] probe
[mga] Error occurred during pci scan: Operation not permitted
[vidixlib] PROBING: nvidia
[nvidia_vid] Error occurred during pci scan: Operation not permitted
[vidixlib] PROBING: pm3
[pm3] Error occurred during pci scan: Operation not permitted
[vidixlib] PROBING: radeon
[radeon] Error occurred during pci scan: Operation not permitted
[vidixlib] PROBING: rage128
[rage128] Error occurred during pci scan: Operation not permitted
[vidixlib] PROBING: s3
[s3_vid] Error occurred during pci scan: Operation not permitted
[vidixlib] PROBING: sis
[SiS] Error occurred during pci scan: Operation not permitted
[vidixlib] PROBING: unichrome
[unichrome] Error occurred during pci scan: Operation not permitted
[vidixlib] No suitable driver can be found.

[VO_SUB_VIDIX] Couldn't find working VIDIX driver.
=======================================================================
===
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 59.21.100 (internal)
Configuration: --enable-gpl --enable-postproc
[h264 @ 0x5581d8215580]nal_unit_type: 7(SPS), nal_ref_idc: 3
[h264 @ 0x5581d8215580]nal_unit_type: 8(PPS), nal_ref_idc: 3
INFO: libavcodec init OK!
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
=======================================================================
===
Clip info:
 major_brand: mp42
 minor_version: 0
 compatible_brands: isommp42
 creation_time: 2019-12-15T10:24:23.000000Z
Load subtitles in ./
get_path('sub/') -> '/home/public/.mplayer/sub/'
=======================================================================
===
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
dec_audio: Allocating 1536000 + 131072 = 1667072 bytes for output
buffer.
FFmpeg's libavcodec audio codec
INFO: libavcodec "aac" init OK!
AUDIO: 44100 Hz, 2 ch, floatle, 96.0 kbit/3.40% (ratio: 11999->352800)
Selected audio codec: [ffaac] afm: ffmpeg (FFmpeg AAC (MPEG-2/MPEG-4
Audio))
=======================================================================
===
Building audio filter chain for 44100Hz/2ch/floatle -> 0Hz/0ch/??...
[libaf] Adding filter dummy
[dummy] Was reinitialized: 44100Hz/2ch/floatle
[dummy] Was reinitialized: 44100Hz/2ch/floatle
Trying every known audio driver...
ao2: 44100 Hz  2 chans  floatle
audio_setup: using '/dev/dsp' dsp device
audio_setup: using '/dev/mixer' mixer device
audio_setup: using 'pcm' mixer device
[AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or
directory
alsa-init: requested format: 44100 Hz, 2 channels, 1d
alsa-init: using ALSA 1.2.5
alsa-init: setup for 1/2 channel(s)
alsa-init: using device default
alsa-init: opening device in blocking mode
alsa-init: device reopened in blocking mode
alsa-init: got buffersize=176400
alsa-init: got period size 1378
alsa: 44100 Hz/2 channels/8 bpf/176400 bytes buffer/Float 32 bit Little
Endian
AO: [alsa] 44100Hz 2ch floatle (4 bytes per sample)
AO: Description: ALSA-0.9.x-1.x audio output
AO: Author: Alex Beregszaszi, Zsolt Barat <joy at streamminister.de>
AO: Comment: under development
Building audio filter chain for 44100Hz/2ch/floatle ->
44100Hz/2ch/floatle...
[dummy] Was reinitialized: 44100Hz/2ch/floatle
[dummy] Was reinitialized: 44100Hz/2ch/floatle
Starting playback...
Increasing filtered audio buffer size from 0 to 131072
[h264 @ 0x5581d8215580]nal_unit_type: 6(SEI), nal_ref_idc: 0
[h264 @ 0x5581d8215580]nal_unit_type: 5(IDR), nal_ref_idc: 3
[h264 @ 0x5581d8215580]Format yuv420p chosen by get_format().
[h264 @ 0x5581d8215580]Reinit context to 640x368, pix_fmt: yuv420p
[ffmpeg] aspect_ratio: 1.777778
VDec: vo config request - 640 x 360 (preferred colorspace: Planar YV12)
Trying filter chain: vo
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO Config (640x360->640x360,flags=0,'MPlayer',0x32315659)
VO: [null] 640x360 => 640x360 Planar YV12
VO: Description: Null video output
VO: Author: Aaron Holtzman <aholtzma at ess.engr.uvic.ca>
*** [vo] Exporting mp_image_t, 640x360x12bpp YUV planar, 345600 bytes
A:   0.0 V:   0.0 A-V:  0.000 ct:  0.000   0/  0 ??% ??% ??,?% 0 0

[h264 @ 0x5581d8215580]nal_unit_type: 1(Coded slice of a non-IDR
picture), nal_ref_idc: 2
A:   0.0 V:   0.0 A-V: -0.001 ct: -0.000   0/  0 ??% ??% ??,?% 0
0                                                                      
                                                              
[h264 @ 0x5581d8215580]nal_unit_type: 1(Coded slice of a non-IDR
picture), nal_ref_idc: 2
A:   0.1 V:   0.1 A-V:  0.000 ct: -0.000   0/  0 ??% ??% ??,?% 0
0                                                                      
.                                                              
.
.
<snip>

**************************************************************
//////////////////////////////////////////////////////////////
**************************************************************


On Fri, 2022-03-25 at 07:24 -0400, The Wanderer wrote:

> On 2022-03-24 at 19:26, Craig Jameson wrote:
> 
> > I am attempting to install mplayer in a user account.  The audio
> > works.
> > But, no window opens to play video.  This is the same for mp4 files
> > and
> > webm files.
> > 
> > The system is running RHEL 8.5.
> > 
> > I believe the following is the salient part of the verbose output:
> 
> <snip>
> 
> > using /dev/fb0
> > Can't open /dev/fb0: Permission denied
> > [fbdev2] Using device /dev/fb0
> > [fbdev2] Can't open /dev/fb0: Permission denied
> 
> This seems to indicate an attempt to use -vo fbdev2 (which, if memory
> serves me correctly, only works when playing from the console - i.e.,
> not in a graphical environment such as X)...
> 
> > VO: [v4l2] No such file or directory
> 
> ...and this seems to indicate an attempt to use -vo v4l2...
> 
> > vo_cvidix: No vidix driver name provided, probing available ones (-
> > v
> > option for details)!
> > [vidixlib] PROBING: cyberblade
> > [cyberblade] Error occurred during pci scan: Operation not
> > permitted
> 
> <snip>
> 
> > [vidixlib] No suitable driver can be found.
> 
> ...but this appears to indicate an attempt to use -vo cvidix.
> 
> Did the command line used specify any -vo option?
> 
> If not, did/does the appropriate config file (see the man page,
> search
> for '/config') specify any -vo option?
> 
> What VO options are compiled in and available? You should be able to
> find this out by running:
> 
> $ mplayer -vo help
> 
> 
> If no VO was specified, either on the command line or in the config
> file(s), then presumably MPlayer will have been running through its
> compiled-in VO options in search of one that can work. If that's
> correct (it's been a very, very long time since the last time I tried
> that scenario), then the fact that it apparently tried those three
> options and gave up might seem to indicate that those are the *only*
> three VO options compiled in to this instance of MPlayer.
> 
> That seems odd and unlikely, but it might explain the problem; that
> would be an exceedingly restricted set of VO options to be limited
> to.
> 
> > Running lspci in a user's account returns, among many other lines,
> > this
> > one:
> > 
> > 
> > 01:00.0 VGA compatible controller: NVIDIA Corporation GP107
> > [GeForce
> > GTX 1050 Ti] (rev a1)
> > 
> > Setting permissions of fb0 to allow all users to read it has been
> > tried.  It has no effect.
> 
> I'm not clear on whether fb0 is usable outside of the console,
> either.
> It's possible that it is, but my learned intuition about the way
> these
> things work would not lead me to expect it to be.
> 
> (I parse "cvidix" as "console VIDIX", by contrast to "xvidix" as "X
> Window System VIDIX".)
> 
> > So, mplayer returns that pci scans are not permitted, when they
> > are. 
> > And, mplayer sets the video driver to null, when there is a driver
> > for
> > my video card.
> 
> Note that there is a difference between "video driver" and "VIDIX
> driver". Just because you have the former, that doesn't necessarily
> mean
> you have the latter.
> 
> > This same machine was running RHEL 7.5.  mplayer ran just fine on
> > it
> > when installed in the same user account.  From apperances, this new
> > install of mplayer is running just fine.  It is just that the video
> > does not play.
> 
> Do you remember what VO was reported as being used, under the
> previous
> setup?
> 
> Is there any difference regarding how MPlayer was installed, between
> these two setups?
> 
> What version of MPlayer is this, and what version was that? (This
> information should be reported at the start of the MPlayer terminal
> output; that's one part of the reasons why it's typically requested
> to
> provide the *full*, un-snipped, output when reporting a problem.)
> 
> _______________________________________________
> MPlayer-users mailing list
> MPlayer-users at mplayerhq.hu
> https://lists.mplayerhq.hu/mailman/listinfo/mplayer-users





More information about the MPlayer-users mailing list