[MPlayer-users] Suse 10.0 glibc crash

[Phil Payne]

Hi,

I'm trying to play an mpeg4 file using the packman package of mplayer on 
Suse 10.0 and it (and others) are regularly crashing at startup with the 
following output:

    *** glibc detected *** double free or corruption (!prev): 0x0874de28 ***
    MPlayer interrupted by signal 6 in module: video_read_frame

Now... I would compile the latest version of mplayer and try again but 
the gcc version on Suse is not correct for this and I'm not enough of a 
Linux expert to play around with changing the gcc version.

Interestingly, the same file when using FreeBSD and a compiled MPlayer 
plays fine, so... I'm assuming its something to do with how I have 
installed Suse + MPlayer, rather than something specific to MPlayer. Can 
anyone out there help me?

Full output below.

Thanks,
Phil.




MPlayer 1.0pre7try2-4.0.2 (C) 2000-2005 MPlayer Team
CPU: Intel Pentium 4/Xeon Willamette (Family: 8, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection - WARNING - this is not optimal!
To get best performance, recompile MPlayer with 
--disable-runtime-cpudetection.


CommandLine: '-v' 'c.avi'
init_freetype
get_path('font/font.desc') -> '/home/philipp/.mplayer/font/font.desc'
font: can't open file: /home/philipp/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars)
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Failed to open /dev/rtc: Permission denied (it should be readable by the 
user.)
Using nanosleep() timing
get_path('input.conf') -> '/home/philipp/.mplayer/input.conf'
Can't open input config file /home/philipp/.mplayer/input.conf: No such 
file or directory
Parsing input config file /etc/mplayer/input.conf
Input config file /etc/mplayer/input.conf parsed: 59 binds
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : No such file or directory
Can't init input joystick
get_path('c.avi.conf') -> '/home/philipp/.mplayer/c.avi.conf'
Playing c.avi.
[file] File size is 726308310 bytes
STREAM: [file] c.avi
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
AVI file format detected.
list_end=0x13A
======= AVI Header =======
us/frame: 41708  (fps=23.976)
max bytes/sec: 0
padding: 0
MainAVIHeader.dwFlags: (2320) HAS_INDEX IS_INTERLEAVED TRUST_CKTYPE
frames  total: 164524   initial: 0
streams: 2
Suggested BufferSize: 0
Size:  608 x 342
==========================
list_end=0xD4
==> Found video stream: 0
====== STREAM Header =====
Type: vids   FCC: DIVX (58564944)
Flags: 0
Priority: 0   Language: 0
InitialFrames: 0
Rate: 2997/125 = 23.976
Start: 0   Len: 164524
Suggested BufferSize: 94165
Quality 0
Sample size: 0
==========================
found 'bih', 40 bytes of 40
======= VIDEO Format ======
  biSize 40
  biWidth 608
  biHeight 342
  biPlanes 1
  biBitCount 24
  biCompression 1482049860='DIVX'
  biSizeImage 623808
===========================
Regenerating keyframe table for MPEG4 video
list_end=0x13A
==> Found audio stream: 1
====== STREAM Header =====
Type: auds   FCC:  (2000)
Flags: 0
Priority: 0   Language: 0
InitialFrames: 16
Rate: 16000/512 = 31.250
Start: 0   Len: 214440
Suggested BufferSize: 7680
Quality 0
Sample size: 512
==========================
found 'wf', 18 bytes of 18
======= WAVE Format =======
Format Tag: 8192 (0x2000)
Channels: 2
Samplerate: 48000
avg byte/sec: 16000
Block align: 512
bits/sample: 0
cbSize: 0
===========================
list_end=0x16A
hdr=Software  size=27
Software  : MEncoder 1.0pre7try2-3.4.4
list_end=0x2AEE108E
Found movie at 0x100C - 0x2AEE108E
Reading INDEX block, 378964 chunks for 164524 frames (fpos=0x2aee1096)
AVI index offset: 0x1008 (movi=0x100C idx0=0x4 idx1=0x20C)
Auto-selected AVI audio ID = 1
Auto-selected AVI video ID = 0
AVI: Searching for audio stream (id:1)
AVI video size=607333376 (164524) audio size=109793280 (214440)
VIDEO:  [DIVX]  608x342  24bpp  23.976 fps  708.0 kbps (86.4 kbyte/s)
[V] filefmt:3  fourcc:0x58564944  size:608x342  fps:23.98  ftime:=0.0417
Clip info:
 Software: MEncoder 1.0pre7try2-3.4.4
get_path('sub/') -> '/home/philipp/.mplayer/sub/'
get_path('default.sub') -> '/home/philipp/.mplayer/default.sub'
==========================================================================
Opening audio decoder: [liba52] AC3 decoding with liba52
dec_audio: Allocating 3840 bytes for input buffer.
dec_audio: Allocating 6144 + 65536 = 71680 bytes for output buffer.
Using SSE optimized IMDCT transform
AC3: 2.0 (stereo)  48000 Hz  128.0 kbit/s
A52 flags before a52_frame: 0x2A
A52 flags after a52_frame: 0x2
Using MMX optimized resampler
AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
Selected audio codec: [a52] afm:liba52 (AC3-liba52)
==========================================================================
X11 opening display: :0.0
vo: X11 color mask:  FFFFFF  (R:FF0000 G:FF00 B:FF)
vo: X11 running at 1280x1024 with depth 24 and 32 bpp (":0.0" => local 
display)
[x11] Detected wm supports NetWM.
[x11] Detected wm supports FULLSCREEN state.
[x11] Detected wm supports ABOVE state.
[x11] Detected wm supports BELOW state.
[x11] Detected wm supports STAYS_ON_TOP state.
[x11] Current fstype setting honours FULLSCREEN STAYS_ON_TOP ABOVE BELOW 
X atoms
[xv common] Drawing colorkey manually.
[xv common] Using colorkey from Xv (0x0101fe).
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
INFO: libavcodec init OK!
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
==========================================================================
Checking audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le...
[libaf] Adding filter volnorm
AF_pre: 48000Hz/2ch/s16le
ao2: 48000 Hz  2 chans  s16le
audio_setup: using '/dev/dsp' dsp device
audio_setup: using '/dev/mixer' mixer device
audio_setup: using 'pcm' mixer device
audio_setup: sample format: s16le (requested: s16le)
audio_setup: using 2 channels (requested: 2)
audio_setup: using 48000 Hz samplerate (requested: 48000)
audio_setup: frags:   8/8  (8192 bytes/frag)  free:  65536
AO: [oss] 48000Hz 2ch s16le (2 bps)
AO: Description: OSS/ioctl audio output
AO: Author: A'rpi
Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le...
Starting playback...
[ffmpeg] aspect_ratio: 1.777778
VDec: vo config request - 608 x 342 (preferred csp: Planar YV12)
Trying filter chain: vo
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO Config (608x342->608x342,flags=0,'MPlayer',0x32315659)
VO: [xv] 608x342 => 608x342 Planar YV12
VO: Description: X11/Xv
VO: Author: Gerd Knorr <kraxel at goldbach.in-berlin.de> and others
Xvideo image format: 0x32595559 (YUY2) packed
Xvideo image format: 0x32315659 (YV12) planar
Xvideo image format: 0x59565955 (UYVY) packed
Xvideo image format: 0x30323449 (I420) planar
using Xvideo port 222 for hw scaling
[xv] dx: 0 dy: 0 dw: 608 dh: 364
*** [vo] Allocating mp_image_t, 608x352x12bpp YUV planar, 321024 bytes
[xv] dx: 0 dy: 0 dw: 608 dh: 364
*** glibc detected *** double free or corruption (!prev): 0x0874de28 ***


MPlayer interrupted by signal 6 in module: video_read_frame
- MPlayer crashed. This shouldn't happen.
  It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
  gcc version. If you think it's MPlayer's fault, please read
  DOCS/HTML/en/bugreports.html and follow the instructions there. We 
can't and
  won't help unless you provide this information when reporting a 
possible bug.
Uninit audio filters...
[libaf] Removing filter volnorm
Killed