[MPlayer-users] problem: cannot run mplayer to vidix output with Radeon9200SE.
Pawel
null7 at wp.pl
Fri Aug 18 11:28:24 CEST 2006
Hallo Darek
Dariusz Andziak writes:
> Hi, I had a similar problem with my Radeon 9500 Card. It looks, the
> xvidix technology recognises the Radeon cards not properly. I solved
> this installing Open GL drivers from ATI WEB-site and then using mplayer
> -vo gl or mplayer -vo gl2 option. It works properly.
> Greetings
> Darek
>
> Pawel napisaâ(a):
> > Hallo group members.
> >
> > My video card is:
> > 01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01)
> > 01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)
> >
> > Below there is a trace from command:
> >
> > prompt# mplayer -v -vo xvidix xvid.50fps.avi.conf
> >
> > I wonder, why radeon chip was not recognized?
> >
> > MPlayer 1.0pre8-Fedora-GS-4.1.1 (C) 2000-2006 MPlayer Team
> > CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Family: 6, Model: 8, Stepping: 10)
> > CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
> > Compiled for x86 CPU with extensions: MMX MMX2 SSE
> >
> >
> > get_path('codecs.conf') -> '/root/.mplayer/codecs.conf'
> > Reading /root/.mplayer/codecs.conf: Can't open '/root/.mplayer/codecs.conf': No such file or directory
> > Reading /etc/mplayer/codecs.conf: Can't open '/etc/mplayer/codecs.conf': No such file or directory
> > Using built-in default codecs.conf.
> > CommandLine: '-v' '-vo' 'xvidix' 'xvid.50fps.avi'
> > init_freetype
> > Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
> > Using Linux hardware RTC timing (1024Hz).
> > get_path('input.conf') -> '/root/.mplayer/input.conf'
> > Can't open input config file /root/.mplayer/input.conf: No such file or directory
> > Parsing input config file /etc/mplayer/input.conf
> > Input config file /etc/mplayer/input.conf parsed: 60 binds
> > get_path('xvid.50fps.avi.conf') -> '/root/.mplayer/xvid.50fps.avi.conf'
> >
> > Playing xvid.50fps.avi.
> > get_path('sub/') -> '/root/.mplayer/sub/'
> > [file] File size is 14542878 bytes
> > STREAM: [file] xvid.50fps.avi
> > STREAM: Description: File
> > STREAM: Author: Albeu
> > STREAM: Comment: based on the code from ??? (probably Arpi)
> > AVI file format detected.
> > list_end=0x186
> > ======= AVI Header =======
> > us/frame: 20000 (fps=50.000)
> > max bytes/sec: 0
> > padding: 0
> > MainAVIHeader.dwFlags: (2320) HAS_INDEX IS_INTERLEAVED TRUST_CKTYPE
> > frames total: 1345 initial: 0
> > streams: 2
> > Suggested BufferSize: 0
> > Size: 720 x 288
> > ==========================
> > list_end=0x120
> > ==> Found video stream: 0
> > ====== STREAM Header =====
> > Type: vids FCC: XVID (44495658)
> > Flags: 0
> > Priority: 0 Language: 0
> > InitialFrames: 0
> > Rate: 50/1 = 50.000
> > Start: 0 Len: 1345
> > Suggested BufferSize: 45986
> > Quality 0
> > Sample size: 0
> > ==========================
> > Found 'bih', 40 bytes of 40
> > ======= VIDEO Format ======
> > biSize 40
> > biWidth 720
> > biHeight 288
> > biPlanes 1
> > biBitCount 12
> > biCompression 1145656920='XVID'
> > biSizeImage 311040
> > ===========================
> > Regenerating keyframe table for MPEG-4 video.
> > ======= Video Properties Header =======
> > Format: 0 VideoStandard: 0
> > VRefresh: 50 HTotal: 720 VTotal: 288
> > FrameAspect: 4:3 Framewidth: 720 Frameheight: 288
> > Fields: 1
> > == Field 0 description ==
> > CompressedBMHeight: 288 CompressedBMWidth: 720
> > ValidBMHeight: 288 ValidBMWidth: 720
> > ValidBMXOffset: 0 ValidBMYOffset: 0
> > VideoXOffsetInT: 0 VideoYValidStartLine: 0
> > =======================================
> > list_end=0x186
> > ==> Found audio stream: 1
> > ====== STREAM Header =====
> > Type: auds FCC: P (50)
> > Flags: 0
> > Priority: 0 Language: 0
> > InitialFrames: 0
> > Rate: 48000/1 = 48000.000
> > Start: 959 Len: 1296000
> > Suggested BufferSize: 24000
> > Quality 0
> > Sample size: 1
> > ==========================
> > Found 'wf', 18 bytes of 18
> > ======= WAVE Format =======
> > Format Tag: 80 (0x50)
> > Channels: 2
> > Samplerate: 48000
> > avg byte/sec: 48000
> > Block align: 1
> > bits/sample: 16
> > cbSize: 0
> > ==========================================================================
> > list_end=0x1BC
> > hdr=Software size=33
> > Software : MEncoder 1.0pre8-Fedora-GS-4.1.1
> > list_end=0xDD90A6
> > Found movie at 0x100C - 0xDD90A6
> > Reading INDEX block, 1399 chunks for 1345 frames (fpos=14520494).
> > AVI index offset: 0x1008 (movi=0x100C idx0=0x4 idx1=0x5DCC)
> > Auto-selected AVI audio ID = 1
> > Auto-selected AVI video ID = 0
> > AVI: Searching for audio stream (id:1)
> > AVI video size=13208555 (1345) audio size=1296000 (1296000)
> > VIDEO: [XVID] 720x288 12bpp 50.000 fps 3928.2 kbps (479.5 kbyte/s)
> > [V] filefmt:3 fourcc:0x44495658 size:720x288 fps:50.00 ftime:=0.0200
> > Clip info:
> > Software: MEncoder 1.0pre8-Fedora-GS-4.1.1
> > get_path('sub/') -> '/root/.mplayer/sub/'
> > ==========================================================================
> > Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
> > dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer.
> > mp3lib: made decode tables with MMX optimization
> > mp3lib: using MMX optimized decore!
> > MP3lib: init layer2&3 finished, tables done
> >
> > MPEG 1.0, Layer II, 48000 Hz 384 kbit Stereo, BPF: 1152
> > Channels: 2, copyright: No, original: No, CRC: Yes, emphasis: 0
> > AUDIO: 48000 Hz, 2 ch, s16le, 384.0 kbit/25.00% (ratio: 48000->192000)
> > Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
> > ==========================================================================
> > No vidix driver name provided, probing available ones (-v option for details)!
> > X11 opening display: :0.0
> > vo: X11 color mask: FFFFFF (R:FF0000 G:FF00 B:FF)
> > vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
> > [x11] Detected wm supports NetWM.
> > [x11] Detected wm supports FULLSCREEN state.
> > [x11] Detected wm supports ABOVE state.
> > [x11] Detected wm supports BELOW state.
> > [x11] Detected wm supports STAYS_ON_TOP state.
> > [x11] Current fstype setting honours FULLSCREEN STAYS_ON_TOP ABOVE BELOW X atoms
> > [VO_SUB_VIDIX] Couldn't find working VIDIX driver.
> > Error opening/initializing the selected video_out (-vo) device.
> > vidixlib: PROBING: /usr/lib/mplayer/vidix/cyberblade_vid.so
> > [cyberblade] Can't find chip
> > vidixlib: PROBING: /usr/lib/mplayer/vidix/mach64_vid.so
> > [mach64] Can't find chip
> > vidixlib: PROBING: /usr/lib/mplayer/vidix/mga_crtc2_vid.so
> > [mga] probe
> > [mga] found 0 pci devices
> > [mga] Can't find chip
> > vidixlib: PROBING: /usr/lib/mplayer/vidix/mga_vid.so
> > [mga] probe
> > [mga] found 0 pci devices
> > [mga] Can't find chip
> > vidixlib: PROBING: /usr/lib/mplayer/vidix/nvidia_vid.so
> > [nvidia_vid] Can't find chip
> > vidixlib: PROBING: /usr/lib/mplayer/vidix/pm3_vid.so
> > [pm3] Can't find chip
> > vidixlib: PROBING: /usr/lib/mplayer/vidix/radeon_vid.so
> > [radeon] Can't find chip
> > vidixlib: PROBING: /usr/lib/mplayer/vidix/rage128_vid.so
> > [rage128] Can't find chip
> > vidixlib: PROBING: /usr/lib/mplayer/vidix/savage_vid.so
> > [savage_vid] Can't find chip
> > vidixlib: PROBING: /usr/lib/mplayer/vidix/sis_vid.so
> > [SiS] Can't find chip
> > vidixlib: PROBING: /usr/lib/mplayer/vidix/unichrome_vid.so
> > [unichrome] Can't find chip
> >
> > Uninit audio: mp3lib
> > vo: uninit ...
> >
> > Exiting... (End of file)
> >
> >
> > Maybe (according to mplayer documentation) I should run it through:
> > mplayer -vo vesa:vidix xvid.50fps.avi.conf
> >
> > but I do not have vesa -vo option. How to get it, should I recompile mplayer with dga support ?
> >
> > prompt# mplayer -vo help
> > MPlayer 1.0pre8-Fedora-GS-4.1.1 (C) 2000-2006 MPlayer Team
> > CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Family: 6, Model: 8, Stepping: 10)
> > CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
> > Compiled for x86 CPU with extensions: MMX MMX2 SSE
> >
> > Available video output drivers:
> > xmga Matrox G200/G4x0/G550 overlay in X11 window (using /dev/mga_vid)
> > mga Matrox G200/G4x0/G550 overlay (/dev/mga_vid)
> > tdfxfb 3Dfx Banshee/Voodoo3/Voodoo5
> > xv X11/Xv
> > x11 X11 ( XImage/Shm )
> > xover General X11 driver for overlay capable video output drivers
> > gl X11 (OpenGL)
> > gl2 X11 (OpenGL) - multiple textures version
> > fbdev Framebuffer Device
> > fbdev2 Framebuffer Device
> > directfb Direct Framebuffer Device
> > dfbmga DirectFB / Matrox G200/G400/G450/G550
> > xvidix X11 (VIDIX)
> > cvidix console VIDIX
> > null Null video output
> > xvmc XVideo Motion Compensation
> > mpegpes Mpeg-PES to DVB card
> > yuv4mpeg yuv4mpeg output for mjpegtools
> > png PNG file
> > jpeg JPEG file
> > gif89a animated GIF output
> > tga Targa output
> > pnm PPM/PGM/PGMYUV file
> > md5sum md5sum of each frame
> >
> >
> >
> > regards,
> > Pawel
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > MPlayer-users mailing list
> > MPlayer-users at mplayerhq.hu
> > http://lists.mplayerhq.hu/mailman/listinfo/mplayer-users
>
> _______________________________________________
> MPlayer-users mailing list
> MPlayer-users at mplayerhq.hu
> http://lists.mplayerhq.hu/mailman/listinfo/mplayer-users
>
Did You notice improovement in speed of movie playback with gl/gl2 + ATI drivers compared to -vo xv. When I use gl/gl2 with xorg drivers it works incredibly slow (much, much slower than -vo xv), that's why I am asking.
Does installing ATI drivers require some acrobatics. Did You try to uninstall them, (I wonder whether it is easy to go back to xorg drivers in case of not satisfying results)?
Regards,
Pawel
More information about the MPlayer-users
mailing list