[MPlayer-users] problem: cannot run mplayer to vidix output with Radeon9200SE.
Dariusz Andziak
dandziak at kikom.pl
Fri Aug 18 11:03:43 CEST 2006
Hi, I had a similar problem with my Radeon 9500 Card. It looks, the
xvidix technology recognises the Radeon cards not properly. I solved
this installing Open GL drivers from ATI WEB-site and then using mplayer
-vo gl or mplayer -vo gl2 option. It works properly.
Greetings
Darek
Pawel napisał(a):
> Hallo group members.
>
> My video card is:
> 01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01)
> 01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)
>
> Below there is a trace from command:
>
> prompt# mplayer -v -vo xvidix xvid.50fps.avi.conf
>
> I wonder, why radeon chip was not recognized?
>
> MPlayer 1.0pre8-Fedora-GS-4.1.1 (C) 2000-2006 MPlayer Team
> CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Family: 6, Model: 8, Stepping: 10)
> CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
> Compiled for x86 CPU with extensions: MMX MMX2 SSE
>
>
> get_path('codecs.conf') -> '/root/.mplayer/codecs.conf'
> Reading /root/.mplayer/codecs.conf: Can't open '/root/.mplayer/codecs.conf': No such file or directory
> Reading /etc/mplayer/codecs.conf: Can't open '/etc/mplayer/codecs.conf': No such file or directory
> Using built-in default codecs.conf.
> CommandLine: '-v' '-vo' 'xvidix' 'xvid.50fps.avi'
> init_freetype
> Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
> Using Linux hardware RTC timing (1024Hz).
> get_path('input.conf') -> '/root/.mplayer/input.conf'
> Can't open input config file /root/.mplayer/input.conf: No such file or directory
> Parsing input config file /etc/mplayer/input.conf
> Input config file /etc/mplayer/input.conf parsed: 60 binds
> get_path('xvid.50fps.avi.conf') -> '/root/.mplayer/xvid.50fps.avi.conf'
>
> Playing xvid.50fps.avi.
> get_path('sub/') -> '/root/.mplayer/sub/'
> [file] File size is 14542878 bytes
> STREAM: [file] xvid.50fps.avi
> STREAM: Description: File
> STREAM: Author: Albeu
> STREAM: Comment: based on the code from ??? (probably Arpi)
> AVI file format detected.
> list_end=0x186
> ======= AVI Header =======
> us/frame: 20000 (fps=50.000)
> max bytes/sec: 0
> padding: 0
> MainAVIHeader.dwFlags: (2320) HAS_INDEX IS_INTERLEAVED TRUST_CKTYPE
> frames total: 1345 initial: 0
> streams: 2
> Suggested BufferSize: 0
> Size: 720 x 288
> ==========================
> list_end=0x120
> ==> Found video stream: 0
> ====== STREAM Header =====
> Type: vids FCC: XVID (44495658)
> Flags: 0
> Priority: 0 Language: 0
> InitialFrames: 0
> Rate: 50/1 = 50.000
> Start: 0 Len: 1345
> Suggested BufferSize: 45986
> Quality 0
> Sample size: 0
> ==========================
> Found 'bih', 40 bytes of 40
> ======= VIDEO Format ======
> biSize 40
> biWidth 720
> biHeight 288
> biPlanes 1
> biBitCount 12
> biCompression 1145656920='XVID'
> biSizeImage 311040
> ===========================
> Regenerating keyframe table for MPEG-4 video.
> ======= Video Properties Header =======
> Format: 0 VideoStandard: 0
> VRefresh: 50 HTotal: 720 VTotal: 288
> FrameAspect: 4:3 Framewidth: 720 Frameheight: 288
> Fields: 1
> == Field 0 description ==
> CompressedBMHeight: 288 CompressedBMWidth: 720
> ValidBMHeight: 288 ValidBMWidth: 720
> ValidBMXOffset: 0 ValidBMYOffset: 0
> VideoXOffsetInT: 0 VideoYValidStartLine: 0
> =======================================
> list_end=0x186
> ==> Found audio stream: 1
> ====== STREAM Header =====
> Type: auds FCC: P (50)
> Flags: 0
> Priority: 0 Language: 0
> InitialFrames: 0
> Rate: 48000/1 = 48000.000
> Start: 959 Len: 1296000
> Suggested BufferSize: 24000
> Quality 0
> Sample size: 1
> ==========================
> Found 'wf', 18 bytes of 18
> ======= WAVE Format =======
> Format Tag: 80 (0x50)
> Channels: 2
> Samplerate: 48000
> avg byte/sec: 48000
> Block align: 1
> bits/sample: 16
> cbSize: 0
> ==========================================================================
> list_end=0x1BC
> hdr=Software size=33
> Software : MEncoder 1.0pre8-Fedora-GS-4.1.1
> list_end=0xDD90A6
> Found movie at 0x100C - 0xDD90A6
> Reading INDEX block, 1399 chunks for 1345 frames (fpos=14520494).
> AVI index offset: 0x1008 (movi=0x100C idx0=0x4 idx1=0x5DCC)
> Auto-selected AVI audio ID = 1
> Auto-selected AVI video ID = 0
> AVI: Searching for audio stream (id:1)
> AVI video size=13208555 (1345) audio size=1296000 (1296000)
> VIDEO: [XVID] 720x288 12bpp 50.000 fps 3928.2 kbps (479.5 kbyte/s)
> [V] filefmt:3 fourcc:0x44495658 size:720x288 fps:50.00 ftime:=0.0200
> Clip info:
> Software: MEncoder 1.0pre8-Fedora-GS-4.1.1
> get_path('sub/') -> '/root/.mplayer/sub/'
> ==========================================================================
> Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
> dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer.
> mp3lib: made decode tables with MMX optimization
> mp3lib: using MMX optimized decore!
> MP3lib: init layer2&3 finished, tables done
>
> MPEG 1.0, Layer II, 48000 Hz 384 kbit Stereo, BPF: 1152
> Channels: 2, copyright: No, original: No, CRC: Yes, emphasis: 0
> AUDIO: 48000 Hz, 2 ch, s16le, 384.0 kbit/25.00% (ratio: 48000->192000)
> Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
> ==========================================================================
> No vidix driver name provided, probing available ones (-v option for details)!
> X11 opening display: :0.0
> vo: X11 color mask: FFFFFF (R:FF0000 G:FF00 B:FF)
> vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
> [x11] Detected wm supports NetWM.
> [x11] Detected wm supports FULLSCREEN state.
> [x11] Detected wm supports ABOVE state.
> [x11] Detected wm supports BELOW state.
> [x11] Detected wm supports STAYS_ON_TOP state.
> [x11] Current fstype setting honours FULLSCREEN STAYS_ON_TOP ABOVE BELOW X atoms
> [VO_SUB_VIDIX] Couldn't find working VIDIX driver.
> Error opening/initializing the selected video_out (-vo) device.
> vidixlib: PROBING: /usr/lib/mplayer/vidix/cyberblade_vid.so
> [cyberblade] Can't find chip
> vidixlib: PROBING: /usr/lib/mplayer/vidix/mach64_vid.so
> [mach64] Can't find chip
> vidixlib: PROBING: /usr/lib/mplayer/vidix/mga_crtc2_vid.so
> [mga] probe
> [mga] found 0 pci devices
> [mga] Can't find chip
> vidixlib: PROBING: /usr/lib/mplayer/vidix/mga_vid.so
> [mga] probe
> [mga] found 0 pci devices
> [mga] Can't find chip
> vidixlib: PROBING: /usr/lib/mplayer/vidix/nvidia_vid.so
> [nvidia_vid] Can't find chip
> vidixlib: PROBING: /usr/lib/mplayer/vidix/pm3_vid.so
> [pm3] Can't find chip
> vidixlib: PROBING: /usr/lib/mplayer/vidix/radeon_vid.so
> [radeon] Can't find chip
> vidixlib: PROBING: /usr/lib/mplayer/vidix/rage128_vid.so
> [rage128] Can't find chip
> vidixlib: PROBING: /usr/lib/mplayer/vidix/savage_vid.so
> [savage_vid] Can't find chip
> vidixlib: PROBING: /usr/lib/mplayer/vidix/sis_vid.so
> [SiS] Can't find chip
> vidixlib: PROBING: /usr/lib/mplayer/vidix/unichrome_vid.so
> [unichrome] Can't find chip
>
> Uninit audio: mp3lib
> vo: uninit ...
>
> Exiting... (End of file)
>
>
> Maybe (according to mplayer documentation) I should run it through:
> mplayer -vo vesa:vidix xvid.50fps.avi.conf
>
> but I do not have vesa -vo option. How to get it, should I recompile mplayer with dga support ?
>
> prompt# mplayer -vo help
> MPlayer 1.0pre8-Fedora-GS-4.1.1 (C) 2000-2006 MPlayer Team
> CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Family: 6, Model: 8, Stepping: 10)
> CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
> Compiled for x86 CPU with extensions: MMX MMX2 SSE
>
> Available video output drivers:
> xmga Matrox G200/G4x0/G550 overlay in X11 window (using /dev/mga_vid)
> mga Matrox G200/G4x0/G550 overlay (/dev/mga_vid)
> tdfxfb 3Dfx Banshee/Voodoo3/Voodoo5
> xv X11/Xv
> x11 X11 ( XImage/Shm )
> xover General X11 driver for overlay capable video output drivers
> gl X11 (OpenGL)
> gl2 X11 (OpenGL) - multiple textures version
> fbdev Framebuffer Device
> fbdev2 Framebuffer Device
> directfb Direct Framebuffer Device
> dfbmga DirectFB / Matrox G200/G400/G450/G550
> xvidix X11 (VIDIX)
> cvidix console VIDIX
> null Null video output
> xvmc XVideo Motion Compensation
> mpegpes Mpeg-PES to DVB card
> yuv4mpeg yuv4mpeg output for mjpegtools
> png PNG file
> jpeg JPEG file
> gif89a animated GIF output
> tga Targa output
> pnm PPM/PGM/PGMYUV file
> md5sum md5sum of each frame
>
>
>
> regards,
> Pawel
> ------------------------------------------------------------------------
>
> _______________________________________________
> MPlayer-users mailing list
> MPlayer-users at mplayerhq.hu
> http://lists.mplayerhq.hu/mailman/listinfo/mplayer-users
More information about the MPlayer-users
mailing list