[MPlayer-users] mencoder TV Capture - video buffer full

David Frey dpfrey at shaw.ca
Thu Aug 14 03:31:41 CEST 2003


I am trying to record from my Phoebe TV Master in Canada using
mencoder.  My computer is an Athlon XP2400+ with 512 MB of RAM and
plenty of free HD space.  I looked through the man page for mencoder and
googled a bit.  I came up with the following command to record 30
seconds.  I am trying to use the onboard audio capture rather than the
line in so that's why I am using dsp1.

mencoder -tv
on:driver=v4l:width=640:height=480:fps=29.97:norm=NTSC:chanlist=us-cable:channel=8:adevice=/dev/dsp1 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1460:keyint=300 -oac mp3lame -lameopts cbr:br=128 -endpos 30 -vop pp=lb,pp=tn:3 -info name="test" -o test.avi

After I run the command, I can see my memory usage rising quickly in
gkrellm.  Once the memory is almost all used up, this error is printed
over and over quite quickly "video buffer full - dropping frame".  I
have included the full output (minus the repeating error at the end)
below.  I can view the TV using both mplayer and xawtv.  Another issue
is that once I try to start recording, the audio is played through my
speakers for some reason and then after I terminate the recording, the
sound won't stop until I unload the bttv module.  Any ideas?

Using GNU internationalization
Original domain: messages
Original dirname: /usr/share/locale
Current domain: mplayer
Current dirname: /usr/share/locale


MEncoder 0.90rc5-3.3.1 (C) 2000-2003 Arpad Gereoffy (see DOCS)

CPU: Advanced Micro Devices  (Family: 6, Stepping: 1)
Detected cache-line size is 64 bytes
MMX2 supported but disabled
CPUflags: Type: 6 MMX: 1 MMX2: 0 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Reading /home/dfrey/.mplayer/mencoder_codecs.conf: can't open
'/home/dfrey/.mplayer/mencoder_codecs.conf': No such file or directory
Reading /etc/mplayer/mencoder_codecs.conf: 50 audio & 136 video codecs
File not found: 'frameno.avi'
Reading config file /home/dfrey/.mplayer/mencoder: No such file or
directory
success: format: 0  data: 0x0 - 0x0
TV detected! ;-)
Selected driver: v4l
 name: Video 4 Linux input
 author: Alex Beregszaszi <alex at naxine.org>
 comment: under development
Selected device: BT878(Askey CPH06X TView99)
 Capabilites: capture tuner overlay clipping frameram scales 
 Device type: 235
 Supported sizes: 48x32 => 924x576
 Inputs: 4
  0: Television: tuner audio tv camera  (tuner:1, norm:pal)
  1: Composite1: audio camera  (tuner:0, norm:pal)
  2: S-Video: audio camera  (tuner:0, norm:pal)
  3: Composite3: audio camera  (tuner:0, norm:pal)
Unable to set trigger: 1
audio block size too low, setting to 8192!
Using input 'Television'
Selected channel: 8 (freq: 181.250)
[V] filefmt:9  fourcc:0x32315659  size:640x480  fps:29.97  ftime:=0.0334
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 44100 Hz, 1 ch, 16 bit (0x10), ratio: 88200->88200 (705.6 kbit)
Selected audio codec: [pcm] afm:pcm (Uncompressed PCM)
==========================================================================
Opening video filter: [expand=-1:-1:-1:-1:1]
Expand: -1 x -1, -1 ; -1  (-1=autodetect) osd: 1
Opening video filter: [pp=lb]
Opening video filter: [pp=tn:3]
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 640 x 480 (preferred csp: Planar YV12)
[PP] Using external postprocessing filter, max q = 6.
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
videocodec: libavcodec (640x480 fourcc=58564944 [DIVX])
Selected video codec: [rawyv12] vfm:raw (RAW YV12)
==========================================================================
MP3 audio selected
Building audio filter chain for 44100Hz/1ch/16bit ->
44100Hz/1ch/16bit...
Forcing audio preload to 0, max pts correction to 0
New_Face failed. Maybe the font path is wrong.
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.
Writing AVI header...
Pos:   0.0s      1f ( 0%)   0fps Trem:   0min   0mb  A-V:0.000 [0:0]
video buffer full - dropping frame

video buffer full - dropping frame

video buffer full - dropping frame

video buffer full - dropping frame

video buffer full - dropping frame

video buffer full - dropping frame

video buffer full - dropping frame

video buffer full - dropping frame




More information about the MPlayer-users mailing list