[Mplayer-dvb] Skystar 2 & mplayer 1.0pre2 probs

[Vadim Catana]

And when I do not use mplayer how to stop the card for saving power,
without unloading the modules  ?

----- Original Message ----- 
From: "Nico" <nsabbi at tiscali.it>
To: "Mplayer with Siemens-DVB card" <mplayer-dvb at mplayerhq.hu>
Sent: Tuesday, November 18, 2003 10:38 PM
Subject: Re: [Mplayer-dvb] Skystar 2 & mplayer 1.0pre2 probs


> you need to load the kernel module dvb-core with dvb_shutdown_timeout=0
>
> ----- Original Message -----
> From: "Prakash K. Cheemplavam" <prakashpublic at gmx.de>
> To: <mplayer-dvb at mplayerhq.hu>
> Sent: Tuesday, November 18, 2003 8:27 PM
> Subject: [Mplayer-dvb] Skystar 2 & mplayer 1.0pre2 probs
>
>
> > So I managed to compile mplayer with dvb with 2.6 kernel.
> >
> > Starting mplayer with
> >
> > mplayer dvb://"ZDF" -vo xv -ao arts -vc ffmpeg2
> >
> > it shows video and gives sound, but only for a few seconds and then
> > shuts down with errors. Full output at the end.
> >
> > But using szap and then mplayer with
> >
> > mplayer -vo xv -ao arts -vc ffmpeg2 - </dev/dvb/adapter0/dvr0
> >
> > it works without problems! So I guess something in the dvb routine in
> > mplayer in not OK.
> >
> > Prakash
> >
> >
> >
> > MPlayer 1.0pre2-3.3.2 (C) 2000-2003 MPlayer Team
> >
> > CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred 2005 MHz (Family:
> > 6, Stepping: 1)
> > Detected cache-line size is 64 bytes
> > CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
> > Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE
> >
> > Reading config file /usr/share/mplayer/mplayer.conf
> > Reading config file /home/light/.mplayer/config
> > Reading /home/light/.mplayer/codecs.conf: Can't open
> > '/home/light/.mplayer/codecs.conf': Datei oder Verzeichnis nicht
gefunden
> > Reading /usr/share/mplayer/codecs.conf: 61 audio & 157 video codecs
> > font: can't open file: /home/light/.mplayer/font/font.desc
> > Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars)
> > Linux RTC init error in ioctl (rtc_irqp_set 1024): Keine Berechtigung
> > Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system
> > startup scripts.
> > Using usleep() timing
> > Can't open input config file /home/light/.mplayer/input.conf: Datei oder
> > Verzeichnis nicht gefunden
> > Input config file /usr/share/mplayer/input.conf parsed: 52 binds
> >
> > Playing dvb://ZDF
> > TUNER TYPE SEEMS TO BE DVB-S
> > code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001
> > Released under the GPL.
> > Latest version available from http://www.linuxstb.org/
> > dvb_tune Freq: 11954000
> > Cache fill: 19,34% (1622016 bytes)    TS file format detected.
> > PROBING UP TO 2000000, PROG: 0
> >
> > New TS pid=110
> >
> > New TS pid=120
> > VIDEO MPEG2(pid=110)...AUDIO MP2(pid=120) PROGRAM N. 0
> > Opened TS demuxer, audio: 50(pid 120), video: 10000002(pid 110)...
> > OPENED_SH_VIDEO
> > OPENED_SH_AUDIO
> > Opened TS demuxer2
> > VIDEO:  MPEG2  720x576  (aspect 3)  25,000 fps  15000,0 kbps (1875,0
> > kbyte/s)
> >
==========================================================================
> > Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
> > MP3lib: init layer2&3 finished, tables done
> > AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 32000->192000 (256,0 kbit)
> > Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
> >
==========================================================================
> > vo: X11 running at 1280x1024 with depth 24 and 32 bpp (":0.0" => local
> > display)
> >
==========================================================================
> > Forced video codec: ffmpeg2
> > Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
> > Selected video codec: [ffmpeg2] vfm:ffmpeg (FFmpeg MPEG 2)
> >
==========================================================================
> > Checking audio filter chain for 48000Hz/2ch/16bit ->
48000Hz/2ch/16bit...
> > AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
> > AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
> > AO: [arts] Connected to sound server
> > AO: [arts] Stream opened
> > AO: [arts] buffer size: 20480
> > AO: [arts] packet size: 2048
> > AO: [arts] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
> > Building audio filter chain for 48000Hz/2ch/16bit ->
48000Hz/2ch/16bit...
> > Starting playback...
> > VDec: vo config request - 720 x 576 (preferred csp: Planar YV12)
> > VDec: using Planar YV12 as output csp (no 0)
> > Movie-Aspect is 1,78:1 - prescaling to correct movie aspect.
> > VO: [xv] 720x576 => 1024x576 Planar YV12
> > dvb_streaming_read, attempt N. 5 failed with errno 11 when reading 328
> bytes
> > dvb_streaming_read, attempt N. 4 failed with errno 11 when reading 328
> bytes
> > dvb_streaming_read, attempt N. 3 failed with errno 11 when reading 328
> bytes
> > dvb_streaming_read, attempt N. 2 failed with errno 11 when reading 328
> bytes
> > dvb_streaming_read, attempt N. 1 failed with errno 11 when reading 328
> bytes
> > dvb_streaming_read, attempt N. 5 failed with errno 11 when reading 2048
> > bytes
> > dvb_streaming_read, attempt N. 4 failed with errno 11 when reading 2048
> > bytes
> > dvb_streaming_read, attempt N. 3 failed with errno 11 when reading 2048
> > bytes
> > dvb_streaming_read, attempt N. 2 failed with errno 11 when reading 2048
> > bytes
> > dvb_streaming_read, attempt N. 1 failed with errno 11 when reading 2048
> > bytes
> > dvb_streaming_read, return 0 bytes
> > A:6715,4 V:6715,9 A-V: -0,499 ct: -0,528  132/132   8%  4%  0,9% 0 0 0%
> >
> > _______________________________________________
> > Mplayer-dvb mailing list
> > Mplayer-dvb at mplayerhq.hu
> > http://mplayerhq.hu/mailman/listinfo/mplayer-dvb
>
> _______________________________________________
> Mplayer-dvb mailing list
> Mplayer-dvb at mplayerhq.hu
> http://mplayerhq.hu/mailman/listinfo/mplayer-dvb