[Mplayer-users] Can't Display DivX ;-) on X11
chitta at cse.iitkgp.ernet.in
chitta at cse.iitkgp.ernet.in
Fri Apr 20 12:54:50 CEST 2001
Hi,
I still dream of getting my mplayer working :(
When I start with -vo x11, I do get sound, but I get a black screen.
I get the following message:
X11 running at 1024x768 depth: 16
Someone suggested that there may be a bug for the depth value of 16.
Can you tell me how to set the colour depth (to 24)?
I have:
Kernel 2.2.16-22
XFree86-4.0.1-1
Intel i810 chipset
Please find attached the full list of mplayer messages and also my
XF86Config file.
------------ On 17 Apr, "Chris Starling" wrote: ------------
MPlayer works like a dream, with this one exception: I can't get it to
play a DivX ;-) encoded file to the x11 output driver. When I try, it
pops open a new window, but then it closes quickly. However, if I run
it with the dga or null driver, it works fine. Here is what it says on the
command line when I run it with x11:
...
I'm running:
Kernel 2.2.15
XF86_SVGA 3.X
BlackBox 0.61.1
--
Best regards, Dial-in: 8 <extn.> or 77393 `*' <extn.>
Chitta Tel: +91 3222 <dial-in> Extn: (off) 3498, (res) 3499
Dept. of CSE, IIT, Kgp. Fax: +1 801 5159121, +44 870 2842932, +91 3222 55303
-------------- next part --------------
$ /users/system/MPlayer-0.11/mplayer -vcd 2 -vo x11 /dev/cdrom
MPlayer 0.11pre24 (C) 2000-2001 Arpad Gereoffy <arpi at esp-team.scene.hu>
track 01: adr=1 ctrl=4 format=2 00:02:00 mode: 148
track 02: adr=1 ctrl=4 format=2 00:46:02 mode: 148
track 03: adr=1 ctrl=4 format=2 01:20:11 mode: 148
Detected MPEG-PS file format!
shmem: 1048576 bytes allocated using shmget() & shmat() (405C8000)
mpeg2dec-0.1.8-cvs (C) 2000 Aaron Holtzman <aholtzma at ess.engr.uvic.ca>
libmpeg2 config flags = 0xA0000000
shmem: 308 bytes allocated using shmget() & shmat() (40019000)
Using MMXEXT for IDCT transform
Using MMXEXT for motion compensation
VIDEO: MPEG1 352x288 (aspect 8) 25.00 fps 1400.0 kbps (175.0 kbyte/s)
X11 running at 1024x768 depth: 16
Sharing memory.
X11 color mask: R:F800 G:7E0 B:1F
Using MMX for colorspace transform
shmem: 152592 bytes allocated using shmget() & shmat() (406FA000)
shmem: 152592 bytes allocated using shmget() & shmat() (40720000)
shmem: 152592 bytes allocated using shmget() & shmat() (40746000)
shmem: 152592 bytes allocated using shmget() & shmat() (4076C000)
starting video codec...
mp3lib: Processor ID: 686
mp3lib: i586 processor detected.
Audio buffer size: 65024 bytes, delay: 0.369s
Audio: type: 1 samplerate: 44100 channels: 2 bps: 2
Start playing...
Video codec started... (pid 1157)
A: 13.4 V: 13.4 A-V: -0.034 ct: -0.121 1076 12% 0% 16.5% 0
Exiting... (Quit)
max framesize was 24964 bytes
vo: uninit!
-------------- next part --------------
# File generated by anaconda.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "/usr/X11R6/lib/X11/fonts/TrueType"
FontPath "unix/:7100"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# DontZoom
EndSection
# Pointer section
# **********************************************************************
Section "Pointer"
Protocol "MouseManPlusPS/2"
Device "/dev/psaux"
# For wheel support - can not be used with Emulate3Buttons
#
# ZAxisMapping 4 5
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Protocol "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice
# BaudRate 9600
# SampleRate 150
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Emulate3Buttons
Emulate3Timeout 50
# ChordMiddle is an option for some 3-button Logitech mice
# ChordMiddle
EndSection
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "Keyboard"
Protocol "Standard"
AutoRepeat 500 5
# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Protocol "Xqueue"
# Let the server do the NumLock processing. This should only be
# required when using pre-R6 clients
# ServerNumLock
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Xleds 1 2 3
# To set the LeftAlt to Meta, RightAlt key to ModeShift,
# RightCtl key to Compose, and ScrollLock key to ModeLock:
LeftAlt Meta
RightAlt Meta
ScrollLock Compose
RightCtl Control
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# XkbDisable
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# XkbModel "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# XkbModel "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# XkbLayout "de"
# or:
# XkbLayout "de"
# XkbVariant "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# XkbOptions "ctrl:nocaps"
XkbOptions "ctrl:swapcaps"
XkbRules "xfree86"
XkbModel "pc101"
# XkbLayout "us"
# XkbVariant ""
# XkbOptions ""
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Generic Monitor"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 31.5
VertRefresh 60
ModeLine "640x480" 25.175 640 664 760 800
480 491 493 525
EndSection
Section "Monitor"
Identifier "SAM2034"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30 - 55
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50 - 120
# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.
# These two are equivalent
# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
# Mode "1024x768i"
# DotClock 45
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# Flags "Interlace"
# EndMode
# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.
# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.
# --320x200--
# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200" 12.588 320 336 384 400
200 204 205 225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240" 12.588 320 336 384 400
240 245 246 262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240" 15.750 320 336 384 400
240 244 246 262 Doublescan
# --400x300--
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300" 18 400 416 448 512
300 301 302 312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300" 20 400 416 480 528
300 301 303 314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300" 25 400 424 488 520
300 319 322 333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300" 21.656 480 496 536 616
300 301 302 312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300" 23.890 480 496 576 632
300 301 303 314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300" 25 480 496 576 632
300 301 303 314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300" 29.952 480 504 584 624
300 319 322 333 Doublescan
# Normal video modes
# -- 512x384
# 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384" 20.160 512 528 592 640
384 385 388 404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384" 22 512 528 592 640
384 385 388 404 -HSync -VSync
# -- 640x400 --
# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400" 25.175 640 664 760 800
400 409 411 450
# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400" 31.5 640 672 736 832
400 401 404 445 -HSync +VSync
# --- 640x480 ---
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800
480 491 493 525
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480" 31.5 640 680 720 864
480 488 491 521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine "640x480" 31.5 640 656 720 840
480 481 484 500 -HSync -VSync
# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x480" 36 640 696 752 832
480 481 484 509 -HSync -VSync
# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480" 45.8 640 672 768 864
480 488 494 530 -HSync -VSync
# --- 800x600 ---
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800 824 896 1024
600 601 603 625
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056
600 601 605 628 +hsync +vsync
# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600" 50 800 856 976 1040
600 637 643 666 +hsync +vsync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline "800x600" 60.75 800 864 928 1088
600 616 621 657 -HSync -VSync
# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline "800x600" 69.65 800 864 928 1088
600 604 610 640 -HSync -VSync
# --- 1024x768 ---
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344
768 771 777 806 -hsync -vsync
# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768" 75 1024 1048 1184 1328
768 771 777 806 -hsync -vsync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768" 85 1024 1032 1152 1360
768 784 787 823
# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768" 98.9 1024 1056 1216 1408
768 782 788 822 -HSync -VSync
# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768" 115.5 1024 1056 1248 1440
768 771 781 802 -HSync -VSync
# --- 1152x864 ---
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline "1152x864" 89.9 1152 1216 1472 1680
864 868 876 892 -HSync -VSync
# 1152x864 @ 70 Hz, 62.4 kHz hsync
Modeline "1152x864" 92 1152 1208 1368 1474
864 865 875 895
# 1152x864 @ 78 Hz, 70.8 kHz hsync
Modeline "1152x864" 110 1152 1240 1324 1552
864 864 876 908
# 1152x864 @ 84 Hz, 76.0 kHz hsync
Modeline "1152x864" 135 1152 1464 1592 1776
864 864 876 908
# 1152x864 @ 100 Hz, 89.62 kHz hsync
Modeline "1152x864" 137.65 1152 1184 1312 1536
864 866 885 902 -HSync -VSync
# -- 1280x1024 --
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024" 110 1280 1328 1512 1712
1024 1025 1028 1054
# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024" 126.5 1280 1312 1472 1696
1024 1032 1040 1068 -HSync -VSync
# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024" 135 1280 1312 1456 1712
1024 1027 1030 1064
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024" 135 1280 1312 1416 1664
1024 1027 1030 1064
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024" 157.5 1280 1344 1504 1728
1024 1025 1028 1072 +HSync +VSync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024" 181.75 1280 1312 1440 1696
1024 1031 1046 1072 -HSync -VSync
# -- 1600x1200 --
# 1600x1200 @ 60Hz, 75.00 kHz hsync
Modeline "1600x1200" 162 1600 1664 1856 2160
1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200" 189 1600 1664 1856 2160
1200 1201 1204 1250 -HSync -VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
Modeline "1600x1200" 202.5 1600 1664 1856 2160
1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200" 220 1600 1616 1808 2080
1200 1204 1207 1244 +HSync +VSync
# -- 1800x1400 --
# 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440" 230 1800 1896 2088 2392
1440 1441 1444 1490 +HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync
ModeLine "1800X1440" 250 1800 1896 2088 2392
1440 1441 1444 1490 +HSync +VSync
# -- 1920x1200 --
# 1920x1200 @ 70Hz, 87.50 KHz hsync
Modeline "1920x1200" 230 1920 1936 2096 2528
1200 1201 1204 1250 +HSync +VSync
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Generic VGA Card"
VendorName "Unknown"
BoardName "Unknown"
Chipset "generic"
EndSection
Section "Device"
Identifier "Intel i810"
Driver "i810"
VideoRam 16384
EndSection
# **********************************************************************
# Screen section
# **********************************************************************
# The kernel framebuffer server
Section "Screen"
Driver "fbdev"
Device "Intel i810"
Monitor "SAM2034"
Subsection "Display"
Depth 24
Modes "default"
EndSubsection
EndSection
# The kernel framebuffer server
# Section "Screen"
# Driver "fbdev"
# Device "Generic VGA Card"
# Monitor "SAM2034"
# Subsection "Display"
# Depth 16
# Modes "default"
# EndSubsection
# EndSection
# The 16-color VGA server
Section "Screen"
Driver "vga16"
Device "Generic VGA Card"
Monitor "SAM2034"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# The Mono server
Section "Screen"
Driver "vga2"
Device "Generic VGA Card"
Monitor "SAM2034"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# The svga server
Section "Screen"
Driver "svga"
Device "Intel i810"
Monitor "SAM2034"
DefaultColorDepth 24
Subsection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# The accel server
Section "Screen"
Driver "accel"
Device "Intel i810"
Monitor "SAM2034"
DefaultColorDepth 24
Subsection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
More information about the MPlayer-users
mailing list