[FFmpeg-cvslog] doc: add libswresample.texi and ffmpeg-resampler.texi files

[Stefano Sabatini]

ffmpeg | branch: master | Stefano Sabatini <stefasab at gmail.com> | Fri Nov  2 12:24:04 2012 +0100| [e903cb419473b76b0825dd0196bdb231770de6d8] | committer: Stefano Sabatini

doc: add libswresample.texi and ffmpeg-resampler.texi files

> http://git.videolan.org/gitweb.cgi/ffmpeg.git/?a=commit;h=e903cb419473b76b0825dd0196bdb231770de6d8
---

 doc/Makefile              |    3 +-
 doc/ffmpeg-resampler.texi |  198 +++++++++++++++++++++++++++++++++++++++++++++
 doc/libswresample.texi    |   62 ++++++++++++++
 3 files changed, 262 insertions(+), 1 deletion(-)

diff --git a/doc/Makefile b/doc/Makefile
index 6a20146..afe361f 100644
--- a/doc/Makefile
+++ b/doc/Makefile
@@ -1,8 +1,9 @@
 DOCLIBS-$(CONFIG_AVUTIL)  += libavutil
+DOCLIBS-$(CONFIG_SWRESAMPLE) += libswresample
 DOCLIBS-$(CONFIG_AVCODEC) += libavcodec
 DOCLIBS-$(CONFIG_AVFILTER) += libavfilter
 
-COMPONENTS=$(PROGS-yes) ffmpeg-codecs ffmpeg-filters
+COMPONENTS=$(PROGS-yes) ffmpeg-codecs ffmpeg-filters ffmpeg-resampler
 
 MANPAGES    = $(COMPONENTS:%=doc/%.1)    $(DOCLIBS-yes:%=doc/%.3)
 PODPAGES    = $(COMPONENTS:%=doc/%.pod)  $(DOCLIBS-yes:%=doc/%.pod)
diff --git a/doc/ffmpeg-resampler.texi b/doc/ffmpeg-resampler.texi
new file mode 100644
index 0000000..1bdb5b0
--- /dev/null
+++ b/doc/ffmpeg-resampler.texi
@@ -0,0 +1,198 @@
+\input texinfo @c -*- texinfo -*-
+
+ at settitle FFmpeg Resampler Documentation
+ at titlepage
+ at center @titlefont{FFmpeg Resampler Documentation}
+ at end titlepage
+
+ at top
+
+ at contents
+
+ at chapter Description
+ at c man begin DESCRIPTION
+
+The FFmpeg resampler provides an high-level interface to the
+libswresample library audio resampling utilities. In particular it
+allows to perform audio resampling, audio channel layout rematrixing,
+and convert audio format and packing layout.
+
+ at c man end DESCRIPTION
+
+ at chapter Resampler Options
+ at c man begin RESAMPLER OPTIONS
+
+The audio resampler supports the following named options.
+
+Options may be set by specifying - at var{option} @var{value} in the
+FFmpeg tools, or by setting the value explicitly in the
+ at code{SwrContext} options or using the @file{libavutil/opt.h} API for
+programmatic use.
+
+ at table @option
+
+ at item ich, in_channel_count
+Set the number of input channels. Default value is 0. Setting this
+value is not mandatory if the corresponding channel layout
+ at option{in_channel_layout} is set.
+
+ at item och, out_channel_count
+Set the number of output channels. Default value is 0. Setting this
+value is not mandatory if the corresponding channel layout
+ at option{out_channel_layout} is set.
+
+ at item uch, used_channel_count
+Set the number of used channels. Default value is 0. This option is
+only used for special remapping.
+
+ at item isr, in_sample_rate
+Set the input sample rate. Default value is 0.
+
+ at item osr, out_sample_rate
+Set the output sample rate. Default value is 0.
+
+ at item isf, in_sample_fmt
+Specify the input sample format. Must be an integer representing the
+corresponding sample format specified in
+ at file{libavutil/samplefmt.h} header. Default value is -1
+(corresponding to @code{AV_SAMPLE_FMT_NONE}).
+
+ at item osf, out_sample_fmt
+Specify the output sample format. Must be an integer representing the
+corresponding sample format specified in
+ at file{libavutil/samplefmt.h} header. Default value is -1
+(corresponding to @code{AV_SAMPLE_FMT_NONE}).
+
+ at item tsf, internal_sample_fmt
+Set the internal sample format. Default value is -1.
+
+ at item icl, in_channel_layout
+Set the input channel layout.
+
+ at item ocl, out_channel_layout
+Set the output channel layout.
+
+ at item clev, center_mix_level
+Set center mix level. It is a value expressed in deciBel, and must be
+inclusively included between -32 and +32.
+
+ at item slev, surround_mix_level
+Set surround mix level. It is a value expressed in deciBel, and must
+be inclusively included between -32 and +32.
+
+ at item lfe_mix_evel
+Set LFE mix level.
+
+ at item rmvol, rematrix_volume
+Set rematrix volume. Default value is 1.0.
+
+ at item flags, swr_flags
+Set flags used by the converter. Default value is 0.
+
+It supports the following individual flags:
+ at table @option
+ at item res
+force resampling
+ at end table
+
+ at item dither_scale
+Set the dither scale. Default value is 1.
+
+ at item dither_method
+Set dither method. Default value is 0.
+
+Supported values:
+ at table @samp
+ at item rectangular
+select rectangular dither
+ at item triangular
+select triangular dither
+ at item triangular_hp
+select triangular dither with high pass
+ at end table
+
+ at item filter_size
+Set resampling filter size, default value is 16.
+
+ at item phase_shift
+Set resampling phase shift, default value is 10, must be included
+between 0 and 30.
+
+ at item linear_interp
+Use Linear Interpolation if set to 1, default value is 0.
+
+ at item cutoff
+Set cutoff frequency ratio. Must be a float value between 0 and 1,
+default value is 0.8.
+
+ at item min_comp
+Set minimum difference between timestamps and audio data (in seconds)
+below which no timestamp compensation of either kind is applied.
+Default value is @code{FLT_MAX}.
+
+ at item min_hard_comp
+Set minimum difference between timestamps and audio data (in seconds)
+to trigger padding/trimming the data. Must be a non-negative double,
+default value is 0.1.
+
+ at item comp_duration
+Set duration (in seconds) over which data is stretched/squeezed to
+make it match the timestamps. Must be a non-negative double float
+value, default value is 1.0.
+
+ at item max_soft_comp
+Set maximum factor by which data is stretched/squeezed to make it
+match the timestamps. Must be a non-negative double float value,
+default value is 0.
+
+ at item matrix_encoding
+Select matrixed stereo encoding.
+
+It accepts the following values:
+ at table @samp
+ at item none
+select none
+ at item dolby
+select Dolby
+ at item dplii
+select Dolby Pro Logic II
+ at end table
+
+Default value is @code{none}.
+
+ at item filter_type
+Select resampling filter type. This only affects resampling
+operations.
+
+It accepts the following values:
+ at table @samp
+ at item cubic
+select cubic
+ at item blackman_nuttall
+select Blackman Nuttall Windowed Sinc
+ at item kaiser
+select Kaiser Windowed Sinc
+ at end table
+
+ at item kaiser_beta
+Set Kaiser Window Beta value. Must be an integer included between 2
+and 16, default value is 9.
+
+ at end table
+
+ at c man end RESAMPLER OPTIONS
+
+ at ignore
+
+ at setfilename ffmpeg-resampler
+ at settitle FFmpeg Resampler
+
+ at c man begin SEEALSO
+ffmpeg(1), ffplay(1), ffprobe(1), ffserver(1), libswresample(3)
+ at c man end
+
+ at c man begin AUTHORS
+See Git history (git://source.ffmpeg.org/ffmpeg)
+ at c man end
+
+ at end ignore
diff --git a/doc/libswresample.texi b/doc/libswresample.texi
new file mode 100644
index 0000000..e1c0e2f
--- /dev/null
+++ b/doc/libswresample.texi
@@ -0,0 +1,62 @@
+\input texinfo @c -*- texinfo -*-
+
+ at settitle Libswresample Documentation
+ at titlepage
+ at center @titlefont{Libswresample Documentation}
+ at end titlepage
+
+ at top
+
+ at contents
+
+ at chapter Description
+ at c man begin DESCRIPTION
+
+The libswresample library performs highly optimized audio resampling,
+rematrixing and sample format conversion operations.
+
+Specifically, this library performs the following conversions:
+
+ at itemize
+ at item
+ at emph{Resampling}: is the process of changing the audio rate, for
+example from an high sample rate of 44100Hz to 8000Hz. Audio
+conversion from high to low sample rate is a lossy process. Several
+resampling options and algorithms are available.
+
+ at item
+ at emph{Format conversion}: is the process of converting the type of
+samples, for example from 16-bit signed samples to unsigned 8-bit or
+float samples. It also handles packing conversion, when passing from
+packed layout (all samples belonging to distinct channels interleaved
+in the same buffer), to planar layout (all samples belonging to the
+same channel stored in a dedicated buffer or "plane").
+
+ at item
+ at emph{Rematrixing}: is the process of changing the channel layout, for
+example from stereo to mono. When the input channels cannot be mapped
+to the output streams, the process is lossy, since it involves
+different gain factors and mixing.
+ at end itemize
+
+Various other audio conversions (e.g. stretching and padding) are
+enabled through dedicated options.
+
+ at c man end DESCRIPTION
+
+ at ignore
+
+ at setfilename libswresample
+ at settitle audio resampling library
+
+ at c man begin SEEALSO
+ffmpeg(1), ffplay(1), ffprobe(1), ffserver(1), ffmpeg-resampler(1), libavutil(3)
+ at c man end
+
+ at c man begin AUTHORS
+See Git history (git://source.ffmpeg.org/ffmpeg)
+ at c man end
+
+ at end ignore
+
+ at bye