October 2009 - MPlayer-DOCS - lists.mplayerhq.hu

r29805 - in trunk: DOCS/man/en/mplayer.1 libvo/x11_common.c
by corey 31 Oct '09

31 Oct '09

Author: corey Date: Fri Oct 30 23:18:29 2009 New Revision: 29805 Log: Slightly change behavior of "none" if fstype specification. In a list of enabled fstypes, "none" now clears the list rather than disabling all fstypes and interrupting the parser. To enable only one (or more) fstypes, list the types to enable after "none". For example: "-fstype none" is the same as before: all disabled "-fstype none,fullscreen" enables only the fullscreen type Modified: trunk/DOCS/man/en/mplayer.1 Changes in other areas also in this revision: Modified: trunk/libvo/x11_common.c Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 Fri Oct 30 15:13:25 2009 (r29804) +++ trunk/DOCS/man/en/mplayer.1 Fri Oct 30 23:18:29 2009 (r29805) @@ -3101,7 +3101,7 @@ Use the _WIN_LAYER hint with the given l .IPs netwm Force NETWM style. .IPs "none\ " -Do not set fullscreen window layer. +Clear the list of modes; you can add modes to enable afterward. .IPs stays_on_top Use _NETWM_STATE_STAYS_ON_TOP hint if available. .REss

1 0

r29798 - in trunk: DOCS/man/en/mplayer.1 libvo/vo_vdpau.c
by cehoyos 27 Oct '09

27 Oct '09

Author: cehoyos Date: Tue Oct 27 09:28:08 2009 New Revision: 29798 Log: Allow image format BGRA when using vo vdpau. Modified: trunk/DOCS/man/en/mplayer.1 Changes in other areas also in this revision: Modified: trunk/libvo/vo_vdpau.c Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 Mon Oct 26 23:15:19 2009 (r29797) +++ trunk/DOCS/man/en/mplayer.1 Tue Oct 27 09:28:08 2009 (r29798) @@ -3511,6 +3511,10 @@ Use ITU-R BT.709 color space. .IPs 3 Use SMPTE-240M color space. .RE +.IPs force\-mixer +Forces the use of the VDPAU mixer, which implements all above options (default). +Use noforce\-mixer to allow displaying BGRA colorspace. +(Disables all above options if image format BGRA is actually used.) .RE .PD 1 .

1 0

r29791 - trunk/DOCS/man/en/mplayer.1
by diego 22 Oct '09

22 Oct '09

Author: diego Date: Thu Oct 22 16:19:10 2009 New Revision: 29791 Log: Break an output line for consistency. Modified: trunk/DOCS/man/en/mplayer.1 Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 Thu Oct 22 16:06:38 2009 (r29790) +++ trunk/DOCS/man/en/mplayer.1 Thu Oct 22 16:19:10 2009 (r29791) @@ -5109,7 +5109,7 @@ Several profiles are available for conve .RSs .IPs default will be used if nothing else was specified (fcut=700, feed=45) -.IPs cmoy +.IPs "cmoy\ " Chu Moy circuit implementation (fcut=700, feed=60) .IPs jmeier Jan Meier circuit implementation (fcut=650, feed=95)

1 0

r29790 - trunk/DOCS/man/en/mplayer.1
by ptt 22 Oct '09

22 Oct '09

Author: ptt Date: Thu Oct 22 16:06:38 2009 New Revision: 29790 Log: cosmetic fixes in bs2b and vdpau sections Modified: trunk/DOCS/man/en/mplayer.1 Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 Tue Oct 20 18:26:30 2009 (r29789) +++ trunk/DOCS/man/en/mplayer.1 Thu Oct 22 16:06:38 2009 (r29790) @@ -3494,7 +3494,7 @@ Useful with slow video memory. .IPs pullup Try to apply inverse telecine, needs motion adaptive temporal deinterlacing. .IPs colorspace -Select the color space for YUV to RGB conversion (default: 1, BT.601). +Select the color space for YUV to RGB conversion. In general BT.601 should be used for standard definition (SD) content and BT.709 for high definition (HD) content. Using incorrect color space results in slightly under or over saturated and @@ -5105,15 +5105,15 @@ Set cut frequency in Hz. Set feed level for low frequencies in 0.1*dB. .IPs profile=<value> Several profiles are available for convenience: +.PD 0 .RSs -default: will be used if nothing else was specified (fcut=700, -feed=45); -.br -cmoy: Chu Moy circuit implementation (fcut=700, feed=60); -.br -jmeier: Jan Meier circuit implementation (fcut=650, feed=95). -.REss -.PD 1 +.IPs default +will be used if nothing else was specified (fcut=700, feed=45) +.IPs cmoy +Chu Moy circuit implementation (fcut=700, feed=60) +.IPs jmeier +Jan Meier circuit implementation (fcut=650, feed=95) +.RE .RE .sp 1 .RS

1 0

r29244 - in trunk: DOCS/man/en/mplayer.1 libaf/af_bs2b.c
by bircoph 22 Oct '09

22 Oct '09

Author: bircoph Date: Sun May 3 23:51:37 2009 New Revision: 29244 Log: Support for libbs2b ver. 3.0.0 API. Now filter parameters are highly controllable, virtually all audio formats are supported, and new profiles are available. Modified: trunk/DOCS/man/en/mplayer.1 Changes in other areas also in this revision: Modified: trunk/libaf/af_bs2b.c Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 Sun May 3 22:57:37 2009 (r29243) +++ trunk/DOCS/man/en/mplayer.1 Sun May 3 23:51:37 2009 (r29244) @@ -5067,10 +5067,26 @@ head shadowing effect. It is applicable only to 2 channel audio. .PD 0 .RSs -.IPs level=<1\-3> -Set cross feed level, higher level means stronger effect (default: 3). -.IPs profile=<0\-1> -Select cross feed profile to use, 1 provides softer sound than 0 (default: 1). +.IPs fcut=<300\-1000> +Set cut frequency in Hz. +.IPs feed=<10\-150> +Set feed level for low frequencies in 0.1*dB. +.IPs profile=<value> +Several profiles are available for convenience: +.RSs +default: will be used if nothing else was specified (fcut=700, +feed=45); +.br +cmoy: Chu Moy circuit implementation (fcut=700, feed=60); +.br +jmeier: Jan Meier circuit implementation (fcut=650, feed=95). +.REss +.PD 1 +.RE +.sp 1 +.RS +If fcut or feed options are specified together with a profile, they +will be applied on top of the selected profile. .RE .PD 1 .

3 3

r29769 - in trunk: DOCS/man/en/mplayer.1 libvo/vo_vdpau.c
by cehoyos 22 Oct '09

22 Oct '09

Author: cehoyos Date: Sat Oct 10 22:53:42 2009 New Revision: 29769 Log: Add colorspace option to vo_vdpau. Allows to use ITU-R BT.709 instead of the default ITU-R BT.601. Patch by Lauri Mylläri, lauri D myllari gmail Modified: trunk/DOCS/man/en/mplayer.1 Changes in other areas also in this revision: Modified: trunk/libvo/vo_vdpau.c Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 Sat Oct 10 12:39:05 2009 (r29768) +++ trunk/DOCS/man/en/mplayer.1 Sat Oct 10 22:53:42 2009 (r29769) @@ -3493,6 +3493,22 @@ Use nochroma\-deint to solely use luma a Useful with slow video memory. .IPs pullup Try to apply inverse telecine, needs motion adaptive temporal deinterlacing. +.IPs colorspace +Select the color space for YUV to RGB conversion (default: 1, BT.601). +In general BT.601 should be used for standard definition (SD) content and +BT.709 for high definition (HD) content. +Using incorrect color space results in slightly under or over saturated and +shifted colors. +.RSss +.IPs 0 +Guess the color space based on video resolution. +Video with width >= 1280 or height > 576 is assumed to be HD and BT.709 color +space will be used. +.IPs 1 +Use ITU-R BT.601 color space (default). +.IPs 2 +Use ITU-R BT.709 color space. +.RE .RE .PD 1 .

3 3

online doc (mplayer.html) not searcheable for commandline options with hyphens or minuses?
by Soeren Bindinger 20 Oct '09

20 Oct '09

Hi all, this is my first mailing to any mailing list - so please pardon me should I transgress any conventions. I'm slowly getting aquainted to various flavors of MPlayer on Windows XP (german keyboard and codepage). I do quite a bit of searching the online documentation (downloaded single file mplayer.html). Now if I type -vf in my firefoxes find bar, I get NO hit at all (zero). That goes for any search containing a hyphen or a minus (-don't think these are different here). Next I type vf and get more hits than I can handle. I searched the list for my issue, and found just one post: http://lists.mplayerhq.hu/pipermail/mplayer-docs/2007-October/009516.html Got even more confused - before that, I was shure to see dashes here, whereas Daniels post suggests them to be hyphens. Maybe my English fools me here? Btw, that post wasn't honored by ANY response. Googled for roff then, decided that I won't even try to find out if it would help installing that on my machine. Decided to write this instead, because I think this is an issue putting off quite a lot of interested-but-not-very-geeky new MP users. 4 ways I can imagine for mending this: --1--> User implemented: tell users near the top of the doc, that this issue exists, and how they can cope with it [i.e. search using a copy of the character ("cotc"), or do a find&replaceAll (using cotc and minus) on their local copy. Warn them this takes a while - more than 15000 instances, if my memory serves me right. --2--> Authors implemented: if it can't be done in roff, each author does the find&replace in another editor before uploading. --3--> Server implemented: a script on the server does a f&r on every upload. --4--> Editor implemented: everybody starts using an editor that can easily produce really searchable text (...pleeez....don't hit me...) If you managed reading up to this: Thank You! Yours sincerely, SoerenB

3 2

r29756 - trunk/DOCS/man/en/mplayer.1
by diego 17 Oct '09

17 Oct '09

Author: diego Date: Tue Oct 6 14:38:06 2009 New Revision: 29756 Log: Clarify screenshot filter description. Modified: trunk/DOCS/man/en/mplayer.1 Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 Tue Oct 6 10:45:20 2009 (r29755) +++ trunk/DOCS/man/en/mplayer.1 Tue Oct 6 14:38:06 2009 (r29756) @@ -7318,9 +7318,9 @@ Files named 'shotNNNN.png' will be saved using the first available number \- no files will be overwritten. The filter has no overhead when not used and accepts an arbitrary colorspace, so it is safe to add it to the configuration file. -Make sure that screenshot is added after all other filters that -you want to have applied to it. -E.g. it should be the last filter if you want to have an exact +Make sure that the screenshot filter is added after all other filters +whose effect you want to record on the saved image. +E.g.\& it should be the last filter if you want to have an exact screenshot of what you see on the monitor. .RE .

3 2

r29771 - in trunk: DOCS/man/en/mplayer.1 libvo/vo_vdpau.c
by cehoyos 13 Oct '09

13 Oct '09

Author: cehoyos Date: Mon Oct 12 23:17:38 2009 New Revision: 29771 Log: Support SMPTE-240M colourspace in vo_vdpau. Modified: trunk/DOCS/man/en/mplayer.1 Changes in other areas also in this revision: Modified: trunk/libvo/vo_vdpau.c Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 Sun Oct 11 13:31:50 2009 (r29770) +++ trunk/DOCS/man/en/mplayer.1 Mon Oct 12 23:17:38 2009 (r29771) @@ -3508,6 +3508,8 @@ space will be used. Use ITU-R BT.601 color space (default). .IPs 2 Use ITU-R BT.709 color space. +.IPs 3 +Use SMPTE-240M color space. .RE .RE .PD 1

1 0

r29766 - trunk/DOCS/man/en/mplayer.1
by ptt 08 Oct '09

08 Oct '09

Author: ptt Date: Thu Oct 8 19:44:23 2009 New Revision: 29766 Log: some coherence's fixes Modified: trunk/DOCS/man/en/mplayer.1 Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 Thu Oct 8 19:40:47 2009 (r29765) +++ trunk/DOCS/man/en/mplayer.1 Thu Oct 8 19:44:23 2009 (r29766) @@ -1817,7 +1817,7 @@ Not guaranteed to work correctly with \- . .TP .B \-srate <Hz> -Selects the output sample rate to be used +Select the output sample rate to be used (of course sound cards have limits on this). If the sample frequency selected is different from that of the current media, the resample or lavcresample audio filter will be inserted @@ -3470,21 +3470,21 @@ for negative values a blurring algorithm .IPs denoise=<0\-1> Apply a noise reduction algorithm to the video (default: 0, no noise reduction). .IPs deint=<0\-4> -Chooses the deinterlacer (default: 0). +Select the deinterlacer (default: 0). All modes > 0 respect \-field\-dominance. .RSss .IPs 0 -No deinterlacing. +no deinterlacing .IPs 1 Show only first field, similar to \-vf field. .IPs 2 Bob deinterlacing, similar to \-vf tfields=1. .IPs 3 -Motion adaptive temporal deinterlacing. +motion adaptive temporal deinterlacing May lead to A/V desync with slow video hardware and/or high resolution. This is the default if "D" is used to enable deinterlacing. .IPs 4 -Motion adaptive temporal deinterlacing with edge-guided spatial interpolation. +motion adaptive temporal deinterlacing with edge-guided spatial interpolation Needs fast video hardware. .RE .IPs chroma\-deint @@ -4967,7 +4967,7 @@ Allow (1) or disallow (0) the output fre from the frequency given by <srate> (default: 1). Can be used if the startup of the playback is extremely slow. .IPs <type> -Selects which resampling method to use. +Select which resampling method to use. .RSss 0: linear interpolation (fast, poor quality especially when upsampling) .br

1 0