March 2007 - MPlayer-DOCS - lists.mplayerhq.hu

[PATCH] make configure and generated main.xml's more "spec-valid"
by Torinthiel 04 Aug '07

04 Aug '07

According to the W3C XML specification, and to the DocBook guide at http://www.docbook.org/tdg/en/html/docbook.html , the system identifier of the DTD should be URI. Now the XML spec shows simple "hello.dtd" as example, so this is quite valid, but the DocBook suggests file://path URIs which are correct local file URIs. The attached patch makes configure use file:// when appropriate, and also fall back to internet-available DTD if no local was found, which didn't cause problem on my box (except for a bit slower testing) and is IMHO better than hard-coding already tested and non-existent path. OK to apply? Torinthiel -- Waclaw "Torinthiel" Schiller GG#: 3073512 torinthiel(at)megapolis(dot)pl gpg: 0906A2CE fpr: EE3E DFB4 C4D6 E22E 8999 D714 7CEB CDDC 0906 A2CE "No classmates may be used during this examination"

5 10

r21959 - in trunk: DOCS/man/en/mplayer.1 cfg-mplayer.h fifo.c
by reimar 30 May '07

30 May '07

Author: reimar Date: Thu Jan 18 20:30:02 2007 New Revision: 21959 Modified: trunk/DOCS/man/en/mplayer.1 Changes in other areas also in this revision: Modified: trunk/cfg-mplayer.h trunk/fifo.c Log: Apply ancient double-click patch that nobody cares to comment on. Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 (original) +++ trunk/DOCS/man/en/mplayer.1 Thu Jan 18 20:30:02 2007 @@ -761,6 +761,17 @@ Support must be compiled in by configuring with \-\-enable-crash-debug. . .TP +.B \-doubleclick-time +Time in milliseconds to recognize two consecutive button presses as +a double-click (default: 300). +Set to 0 to let your windowing system decide what a double-click is +(\-vo directx only). +.br +.I NOTE: +you will get slightly different behaviour depending on whether you bind +MOUSE_BTN0_DBL or MOUSE_BTN0\-MOUSE_BTN0_DBL. +. +.TP .B \-edlout <filename> Creates a new file and writes edit decision list (EDL) records to it. During playback, the user hits 'i' to mark the start or end of a skip block.

2 1

r22075 - trunk/DOCS/man/en/mplayer.1
by diego 30 May '07

30 May '07

Author: diego Date: Tue Jan 30 14:49:07 2007 New Revision: 22075 Modified: trunk/DOCS/man/en/mplayer.1 Log: Document -noidx. Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 (original) +++ trunk/DOCS/man/en/mplayer.1 Tue Jan 30 14:49:07 2007 @@ -1353,6 +1353,11 @@ (i.e.\& not with stdin, pipe, etc). . .TP +.B \-noidx +Skip rebuilding index file. +MEncoder skips writing the index with this option. +. +.TP .B \-ipv4-only-proxy (network only) Skip the proxy for IPv6 addresses. It will still be used for IPv4 connections.

2 1

SDK?
by Vandra Ákos 31 Mar '07

31 Mar '07

Hello! I am trying to make a third-party app, that would be able to control the behavior of MPlayer... I mean pause/stop/start the movie, jump fwd-bwd, set volume, etc... I haven't found any way to do this, maybe you could help me out with an SDK, or something? I am currently working on the windows version, but I am thinking of doing it cross-platform, if it is possible (working in c#). Thanks in advance, Vandra Ákos P.S. May I write in hungarian?

2 3

r22854 - trunk/DOCS/xml/en/video.xml
by diego 31 Mar '07

31 Mar '07

Author: diego Date: Sat Mar 31 15:35:42 2007 New Revision: 22854 Modified: trunk/DOCS/xml/en/video.xml Log: Remove empty section. Modified: trunk/DOCS/xml/en/video.xml ============================================================================== --- trunk/DOCS/xml/en/video.xml (original) +++ trunk/DOCS/xml/en/video.xml Sat Mar 31 15:35:42 2007 @@ -89,10 +89,7 @@ stepping 0) CPUs don't have MTRRs, but s  -<sect1 id="output-trad"> -<title>Video outputs for traditional video cards</title> - -<sect2 id="xv"> +<sect1 id="xv"> <title>Xv</title> <para> @@ -165,7 +162,7 @@ screen #0 </para> -<sect3 id="tdfx"> +<sect2 id="tdfx"> <title>3dfx cards</title> <para> @@ -183,10 +180,10 @@ If you experience strange effects using <option>-vo tdfxfb</option> driver! See the <link linkend="tdfxfb">tdfxfb</link> section. </para> -</sect3> +</sect2> -<sect3 id="s3"> +<sect2 id="s3"> <title>S3 cards</title> <para> @@ -208,10 +205,10 @@ It's currently unclear which Savage mode driver (slow). If you suspect your card, get a newer driver, or ask politely on the MPlayer-users mailing list for an MMX/3DNow! enabled driver. </para></note> -</sect3> +</sect2> -<sect3 id="nvidia"> +<sect2 id="nvidia"> <title>nVidia cards</title> <para> @@ -233,10 +230,10 @@ However, <application>MPlayer</applicati is in beta stage, and has some drawbacks. For more information, see <link linkend="vidix-nvidia">nVidia VIDIX</link> section. </para> -</sect3> +</sect2> -<sect3 id="ati"> +<sect2 id="ati"> <title>ATI cards</title> <para> @@ -255,10 +252,10 @@ without <emphasis role="bold">TV output< needed. Read the <link linkend="vidix">VIDIX</link> section. </para> -</sect3> +</sect2> -<sect3 id="neomagic"> +<sect2 id="neomagic"> <title>NeoMagic cards</title> <para> @@ -287,10 +284,10 @@ Section "Device" EndSection</programlisting> </para> -</sect3> +</sect2> -<sect3 id="trident"> +<sect2 id="trident"> <title>Trident cards</title> <para> @@ -303,10 +300,10 @@ support with the Cyberblade XP card. Alternatively, <application>MPlayer</application> contains a <link linkend="vidix">VIDIX</link> driver for the Cyberblade/i1 card. </para> -</sect3> +</sect2> -<sect3 id="kyro"> +<sect2 id="kyro"> <title>Kyro/PowerVR cards</title> <para> @@ -314,12 +311,12 @@ If you want to use Xv with a Kyro based Prophet 4000XT), you should download the drivers from the <ulink url="http://www.powervr.com/">PowerVR site</ulink> </para> -</sect3> </sect2> +</sect1>  -<sect2 id="dga"> +<sect1 id="dga"> <title>DGA</title> <formalpara> @@ -603,11 +600,11 @@ with every chipset driver for XFree out </para></listitem> </itemizedlist> -</sect2> +</sect1>  -<sect2 id="sdl"> +<sect1 id="sdl"> <title>SDL</title> <para> @@ -636,11 +633,11 @@ system problem), or audio is lagging. SDL video output supports displaying subtitles under the movie, on the (if present) black bar. </para> -</sect2> +</sect1>  -<sect2 id="svgalib"> +<sect1 id="svgalib"> <title>SVGAlib</title> <formalpara> @@ -712,11 +709,11 @@ samplerate on my box, because the sound You can turn on OSD and subtitles only with the <option>expand</option> filter, see the man page for exact parameters. </para> -</sect2> +</sect1>  -<sect2 id="fbdev"> +<sect1 id="fbdev"> <title>Framebuffer output (FBdev)</title> <para> @@ -808,11 +805,11 @@ FBdev video mode changing <emphasis>does framebuffer, and don't ask for it, since it's not an <application>MPlayer</application> limitation. </para></note> -</sect2> +</sect1>  -<sect2 id="mga_vid"> +<sect1 id="mga_vid"> <title>Matrox framebuffer (mga_vid)</title> <para> @@ -887,11 +884,11 @@ There is a test application called <comm directory. It should draw 256x256 images on the screen if all is working well. </para> -</sect2> +</sect1>  -<sect2 id="tdfxfb" xreflabel="3Dfx YUV support (tdfxfb)"> +<sect1 id="tdfxfb" xreflabel="3Dfx YUV support (tdfxfb)"> <title>3Dfx YUV support</title> <para> @@ -900,11 +897,11 @@ YUV acceleration. You'll need a kernel w with <screen>./configure --enable-tdfxfb</screen> </para> -</sect2> +</sect1>  -<sect2 id="tdfx_vid"> +<sect1 id="tdfx_vid"> <title>tdfx_vid</title> <para> @@ -945,11 +942,11 @@ There is a test application called <comm directory. It should print out some useful information if all is working well. </para> -</sect2> +</sect1>  -<sect2 id="opengl"> +<sect1 id="opengl"> <title>OpenGL output</title> <para> @@ -983,11 +980,11 @@ least on nVidia): <para> <command>export __GL_SYNC_TO_VBLANK=1</command> </para> -</sect2> +</sect1>  -<sect2 id="aalib"> +<sect1 id="aalib"> <title>AAlib – text mode displaying</title> <para> @@ -1111,11 +1108,11 @@ That isn't autodetected by aalib, but vo See <ulink url="http://aa-project.sf.net/tune"/> for further tuning issues. </para> -</sect2> +</sect1>  -<sect2 id="caca"> +<sect1 id="caca"> <title> <systemitem class="library">libcaca</systemitem> – Color ASCII Art library </title> @@ -1208,11 +1205,11 @@ Use the <option>-framedrop</option> opti enough to render all frames. </para> -</sect2> +</sect1>  -<sect2 id="vesa"> +<sect1 id="vesa"> <title>VESA - output to VESA BIOS</title> <para> @@ -1347,11 +1344,11 @@ It won't work! itself only once during POST procedure. </para></listitem> </itemizedlist> -</sect2> +</sect1>  -<sect2 id="x11"> +<sect1 id="x11"> <title>X11</title> <para> @@ -1396,11 +1393,11 @@ If you can't find the modes you inserted drivers can't use low pixelclocks that are needed for low resolution video modes. </para> -</sect2> +</sect1>  -<sect2 id="vidix"> +<sect1 id="vidix"> <title>VIDIX</title> <formalpara><title>PREAMBLE</title> @@ -1561,7 +1558,7 @@ Alternatively, you can use a special ker </procedure> -<sect3 id="vidix-ati"> +<sect2 id="vidix-ati"> <title>ATI cards</title> <para> @@ -1574,10 +1571,10 @@ There are two compiled binaries: <filena <filename>rage128_vid</filename> for Rage 128 cards. You may force one or let the VIDIX system autoprobe all available drivers. </para> -</sect3> +</sect2> -<sect3 id="vidix-mga"> +<sect2 id="vidix-mga"> <title>Matrox cards</title> <para> @@ -1588,10 +1585,10 @@ Matrox G200, G400, G450 and G550 have be The driver supports video equalizers and should be nearly as fast as the <link linkend="mga_vid">Matrox framebuffer</link> </para> -</sect3> +</sect2> -<sect3 id="vidix-trident"> +<sect2 id="vidix-trident"> <title>Trident cards</title> <para> @@ -1603,20 +1600,20 @@ can be found on VIA Epia motherboards. The driver was written and is maintained by <ulink url="http://www.blackfiveservices.co.uk/EPIAVidix.shtml">Alastair M. Robinson</ulink>. </para> -</sect3> +</sect2> -<sect3 id="vidix-3dlabs"> +<sect2 id="vidix-3dlabs"> <title>3DLabs cards</title> <para> Although there is a driver for the 3DLabs GLINT R3 and Permedia3 chips, no one has tested it, so reports are welcome. </para> -</sect3> +</sect2> -<sect3 id="vidix-nvidia"> +<sect2 id="vidix-nvidia"> <title>nVidia cards</title> <para> @@ -1626,10 +1623,10 @@ framebuffer or X magic whatsoever. For t <option>cvidix</option> video output, as the following example shows: <screen>mplayer -vo cvidix <replaceable>example.avi</replaceable></screen> </para> -</sect3> +</sect2> -<sect3 id="vidix-sis"> +<sect2 id="vidix-sis"> <title>SiS cards</title> <para> @@ -1644,12 +1641,12 @@ SiS versions of the "Shuttle XPC" barebo <para> Reports awaited! </para> -</sect3> </sect2> +</sect1>  -<sect2 id="directfb"> +<sect1 id="directfb"> <title>DirectFB</title> <blockquote><para> @@ -1674,11 +1671,11 @@ on the command line, using the <option>- selection can be done by the subdevice method, e.g.: <option>-vo directfb:2</option> (layer -1 is default: autodetect) </para> -</sect2> +</sect1>  -<sect2 id="dfbmga"> +<sect1 id="dfbmga"> <title>DirectFB/Matrox (dfbmga)</title> <para> @@ -1707,7 +1704,6 @@ patch from the URL above). Porting the C <link linkend="mga_vid">mga_vid</link> has been planned for years, <ulink url="../../tech/patches.txt">patches</ulink> are welcome. </para></note> -</sect2> </sect1>

1 0

r22845 - trunk/DOCS/man/en/mplayer.1
by reimar 30 Mar '07

30 Mar '07

Author: reimar Date: Fri Mar 30 19:10:35 2007 New Revision: 22845 Modified: trunk/DOCS/man/en/mplayer.1 Log: Clarify -xineramascreen -2 behaviour Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 (original) +++ trunk/DOCS/man/en/mplayer.1 Fri Mar 30 19:10:35 2007 @@ -2965,7 +2965,8 @@ Useful to embed MPlayer in a browser (e. .B \-xineramascreen <\-2\-...> (X11 only) In Xinerama configurations (i.e.\& a single desktop that spans across multiple displays) this option tells MPlayer which screen to display the movie on. -A value of \-2 means fullscreen across the whole virtual display, \-1 means +A value of \-2 means fullscreen across the whole virtual display (in this case +Xinerama information is completely ignored), \-1 means fullscreen on the display the window currently is on. The initial position set via the \-geometry option is relative to the specified screen.

1 0

[homepage]: r2830 - trunk/design7/src/selector
by diego 24 Mar '07

24 Mar '07

Author: diego Date: Sat Mar 24 19:15:13 2007 New Revision: 2830 Modified: trunk/design7/src/selector Log: www6/ftp6 is gone for good. Modified: trunk/design7/src/selector ============================================================================== --- trunk/design7/src/selector (original) +++ trunk/design7/src/selector Sat Mar 24 19:15:13 2007 @@ -89,7 +89,6 @@ <a href="http://www3.mplayerhq.hu/">USA</a><br>  <a href="http://www5.mplayerhq.hu/">Korea</a><br> - </span> </div> @@ -99,7 +98,6 @@ <a href="ftp://ftp2.mplayerhq.hu/MPlayer/">Hungary</a><br>  <a href="ftp://ftp5.mplayerhq.hu/MPlayer/">Korea</a><br> - <a href="ftp://ftp.fu-berlin.de/unix/X11/multimedia/MPlayer/">Germany</a><br> </span> </div>

1 0

r22800 - in trunk: DOCS/xml/en/video.xml libdha/Makefile
by diego 24 Mar '07

24 Mar '07

Author: diego Date: Sat Mar 24 15:39:39 2007 New Revision: 22800 Modified: trunk/DOCS/xml/en/video.xml Changes in other areas also in this revision: Modified: trunk/libdha/Makefile Log: Get rid of useless conditional, using svgalib_helper now requires modifying a line in the Makefile in all cases. Modified: trunk/DOCS/xml/en/video.xml ============================================================================== --- trunk/DOCS/xml/en/video.xml (original) +++ trunk/DOCS/xml/en/video.xml Sat Mar 24 15:39:39 2007 @@ -1552,9 +1552,8 @@ Alternatively, you can use a special ker <filename class="directory">mplayer/main/libdha/svgalib_helper</filename>. </para></step> <step><para> - Required if you download the source from the svgalib site: Remove the comment - before the CFLAGS line containing "svgalib_helper" string from the - <filename class="directory">libdha/Makefile</filename>. + Remove the comment before the CFLAGS line containing the "svgalib_helper" + string from the <filename class="directory">libdha/Makefile</filename>. </para></step> <step><para> Recompile and install libdha.

1 0

[homepage]: r2829 - trunk/src/projects.src.en
by compn 22 Mar '07

22 Mar '07

Author: compn Date: Thu Mar 22 16:31:17 2007 New Revision: 2829 Modified: trunk/src/projects.src.en Log: add smplayer frontend Modified: trunk/src/projects.src.en ============================================================================== --- trunk/src/projects.src.en (original) +++ trunk/src/projects.src.en Thu Mar 22 16:31:17 2007 @@ -73,6 +73,8 @@ <h2><a name="mplayer_frontends">MPlayer Frontends</a></h2> <ul> + <li><a href="http://smplayer.sourceforge.net/">SMPlayer</a><br> + QT MPlayer frontend for Windows and Linux</li> <li><a href="http://www.xs4all.nl/~jjvrieze/kmplayer.html">KMPlayer</a><br> KDE MPlayer frontend</li> <li><a href="http://kplayer.sf.net/">KPlayer</a><br>

1 0

r22779 - trunk/DOCS/man/en/mplayer.1
by kraymer 22 Mar '07

22 Mar '07

Author: kraymer Date: Thu Mar 22 11:52:56 2007 New Revision: 22779 Modified: trunk/DOCS/man/en/mplayer.1 Log: roff fix: escape dash for options Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 (original) +++ trunk/DOCS/man/en/mplayer.1 Thu Mar 22 11:52:56 2007 @@ -3341,7 +3341,7 @@ which is better for fixed-size fonts. Disabled looks much better with FreeType fonts and uses the borders in fullscreen mode. Does not work correctly with ass subtitles (see \-ass), you can instead -render them without OpenGL support via -vf ass. +render them without OpenGL support via \-vf ass. .IPs osdcolor=<0xRRGGBB> Color for OSD (default: 0xffffff, corresponds to white). .IPs rectangle=<0,1,2>

1 0