January 2007 - MPlayer-DOCS - lists.mplayerhq.hu

[PATCH] make configure and generated main.xml's more "spec-valid"
by Torinthiel 04 Aug '07

04 Aug '07

According to the W3C XML specification, and to the DocBook guide at http://www.docbook.org/tdg/en/html/docbook.html , the system identifier of the DTD should be URI. Now the XML spec shows simple "hello.dtd" as example, so this is quite valid, but the DocBook suggests file://path URIs which are correct local file URIs. The attached patch makes configure use file:// when appropriate, and also fall back to internet-available DTD if no local was found, which didn't cause problem on my box (except for a bit slower testing) and is IMHO better than hard-coding already tested and non-existent path. OK to apply? Torinthiel -- Waclaw "Torinthiel" Schiller GG#: 3073512 torinthiel(at)megapolis(dot)pl gpg: 0906A2CE fpr: EE3E DFB4 C4D6 E22E 8999 D714 7CEB CDDC 0906 A2CE "No classmates may be used during this examination"

5 10

r21959 - in trunk: DOCS/man/en/mplayer.1 cfg-mplayer.h fifo.c
by reimar 31 May '07

31 May '07

Author: reimar Date: Thu Jan 18 20:30:02 2007 New Revision: 21959 Modified: trunk/DOCS/man/en/mplayer.1 Changes in other areas also in this revision: Modified: trunk/cfg-mplayer.h trunk/fifo.c Log: Apply ancient double-click patch that nobody cares to comment on. Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 (original) +++ trunk/DOCS/man/en/mplayer.1 Thu Jan 18 20:30:02 2007 @@ -761,6 +761,17 @@ Support must be compiled in by configuring with \-\-enable-crash-debug. . .TP +.B \-doubleclick-time +Time in milliseconds to recognize two consecutive button presses as +a double-click (default: 300). +Set to 0 to let your windowing system decide what a double-click is +(\-vo directx only). +.br +.I NOTE: +you will get slightly different behaviour depending on whether you bind +MOUSE_BTN0_DBL or MOUSE_BTN0\-MOUSE_BTN0_DBL. +. +.TP .B \-edlout <filename> Creates a new file and writes edit decision list (EDL) records to it. During playback, the user hits 'i' to mark the start or end of a skip block.

2 1

r22075 - trunk/DOCS/man/en/mplayer.1
by diego 30 May '07

30 May '07

Author: diego Date: Tue Jan 30 14:49:07 2007 New Revision: 22075 Modified: trunk/DOCS/man/en/mplayer.1 Log: Document -noidx. Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 (original) +++ trunk/DOCS/man/en/mplayer.1 Tue Jan 30 14:49:07 2007 @@ -1353,6 +1353,11 @@ (i.e.\& not with stdin, pipe, etc). . .TP +.B \-noidx +Skip rebuilding index file. +MEncoder skips writing the index with this option. +. +.TP .B \-ipv4-only-proxy (network only) Skip the proxy for IPv6 addresses. It will still be used for IPv4 connections.

2 1

Draft: iPod encoding guide
by Mark Pilgrim 11 Feb '07

11 Feb '07

As promised in a previous thread, here is the first draft of my iPod encoding guide. As usual, feel free to tell me when I am talking out of my ass. -- Cheers, -Mark

7 15

r22089 - trunk/DOCS/man/en/mplayer.1
by lorenm 31 Jan '07

31 Jan '07

Author: lorenm Date: Wed Jan 31 09:23:37 2007 New Revision: 22089 Modified: trunk/DOCS/man/en/mplayer.1 Log: x264's crf takes a float argument Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 (original) +++ trunk/DOCS/man/en/mplayer.1 Wed Jan 31 09:23:37 2007 @@ -9076,7 +9076,7 @@ For example, MPEG at QP=2 is equivalent to H.264 at QP=18. . .TP -.B crf=<1\-50> +.B crf=<1.0\-50.0> Enables constant quality mode, and selects the quality. The scale is similar to QP. Like the bitrate-based modes, this allows each frame to use a

1 0

Re: [MPlayer-DOCS] r22061 - trunk/DOCS/man/en/mplayer.1
by Carl Eugen Hoyos 30 Jan '07

30 Jan '07

Hi Diego! On 2007-01-29 14:26, diego wrote: > Author: diego > Date: Mon Jan 29 15:26:42 2007 > New Revision: 22061 > > Modified: > trunk/DOCS/man/en/mplayer.1 > > Log: > typo, new sentences on lines of their own > > > Modified: trunk/DOCS/man/en/mplayer.1 > ============================================================================== > --- trunk/DOCS/man/en/mplayer.1 (original) > +++ trunk/DOCS/man/en/mplayer.1 Mon Jan 29 15:26:42 2007 > @@ -1632,10 +1632,10 @@ > . > .TP > .B \-psprobe <byte position> > -When playing an MPEG-PS stream, this option lets you specify how many > +When playing an MPEG-PS stream, this option let's you specify how many I don't think this change was correct;-) Carl Eugen [...]

2 1

r22074 - trunk/DOCS/man/en/mplayer.1
by diego 30 Jan '07

30 Jan '07

Author: diego Date: Tue Jan 30 14:31:57 2007 New Revision: 22074 Modified: trunk/DOCS/man/en/mplayer.1 Log: typo Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 (original) +++ trunk/DOCS/man/en/mplayer.1 Tue Jan 30 14:31:57 2007 @@ -1425,7 +1425,7 @@ . .TP .B \-psprobe <byte position> -When playing an MPEG-PS stream, this option let's you specify how many +When playing an MPEG-PS stream, this option lets you specify how many bytes in the stream you want MPlayer to scan in order to identify the video codec used. This option is needed to play EVO files containing H.264 streams.

1 0

[homepage]: r2785 - trunk/src/projects.src.en
by diego 30 Jan '07

30 Jan '07

Author: diego Date: Tue Jan 30 11:52:54 2007 New Revision: 2785 Modified: trunk/src/projects.src.en Log: whitespace cosmetics Modified: trunk/src/projects.src.en ============================================================================== --- trunk/src/projects.src.en (original) +++ trunk/src/projects.src.en Tue Jan 30 11:52:54 2007 @@ -198,10 +198,9 @@ KDE service menu which allows conversion of video files into DVD or VCD compliant MPEG files.</li> <li><a href="http://mulder.dummwiedeutsch.de/home/html/projects.html#mencoder264">MEncoder264</a> - a GUI for Windows for H.264 encoding via MEncoder - </li> + a GUI for Windows for H.264 encoding via MEncoder</li> <li><a href="http://sf.net/projects/smsg/">SMSG</a> - Simple Mencoder Shell GUI, batch video transcoding application + Simple Mencoder Shell GUI, batch video transcoding application without all tabs, buttons and other fuzz</li> <li><a href="http://www.seabyrdtech.com/bbvideo">Blackberry Video Converter</a> No-cost utility to encode video to play on a RIM Blackberry.</li>

1 0

[homepage]: r2784 - trunk/src/projects.src.en
by diego 30 Jan '07

30 Jan '07

Author: diego Date: Tue Jan 30 11:51:55 2007 New Revision: 2784 Modified: trunk/src/projects.src.en Log: Take Blackberry video converter off the blacklist, source is now distributed. Modified: trunk/src/projects.src.en ============================================================================== --- trunk/src/projects.src.en (original) +++ trunk/src/projects.src.en Tue Jan 30 11:51:55 2007 @@ -203,6 +203,8 @@ <li><a href="http://sf.net/projects/smsg/">SMSG</a> Simple Mencoder Shell GUI, batch video transcoding application without all tabs, buttons and other fuzz</li> + <li><a href="http://www.seabyrdtech.com/bbvideo">Blackberry Video Converter</a> + No-cost utility to encode video to play on a RIM Blackberry.</li> </ul> @@ -677,9 +679,6 @@ <li><a href="http://www.blazevideo.com/videomagic/index.htm">Blaze Video Magic</a> Multimedia file conversion utility based on MEncoder that fails to give credit. Source requests went unanswered.</li> - <li><a href="http://www.seabyrdtech.com/bbvideo">Blackberry Video Converter</a> - No-cost utility to encode video to play on a RIM Blackberry. - Appears to redistribute MEncoder without source.</li> </ul>

1 0

r22062 - trunk/DOCS/man/en/mplayer.1
by diego 29 Jan '07

29 Jan '07

Author: diego Date: Mon Jan 29 15:29:00 2007 New Revision: 22062 Modified: trunk/DOCS/man/en/mplayer.1 Log: alphabetical order Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 (original) +++ trunk/DOCS/man/en/mplayer.1 Mon Jan 29 15:29:00 2007 @@ -1424,6 +1424,13 @@ Falls back on IPv4 automatically. . .TP +.B \-psprobe <byte position> +When playing an MPEG-PS stream, this option let's you specify how many +bytes in the stream you want MPlayer to scan in order to identify the +video codec used. +This option is needed to play EVO files containing H.264 streams. +. +.TP .B \-pvr <option1:option2:...> (PVR only) This option tunes various encoding properties of the PVR capture module. It has to be used with any hardware MPEG encoder based card supported by the @@ -1489,6 +1496,62 @@ .PD 1 . .TP +.B \-radio <option1:option2:...> (radio only) +These options set various parameters of the radio capture module. +For listening to radio with MPlayer use 'radio://<frequency>' +(if channels option is not given) or 'radio://<channel_number>' +(if channels option is given) as a movie URL. +You can see allowed frequency range by running MPlayer with '\-v'. +To start the grabbing subsystem, use 'radio://<frequency or channel>/capture'. +If the capture keyword is not given you can listen to radio +using the line-in cable only. +Using capture to listen is not recommended due to synchronization +problems, which makes this process uncomfortable. +.sp 1 +Available options are: +.RSs +.IPs device=<value> +Radio device to use (default: /dev/radio0 for Linux and /dev/tuner0 for *BSD). +.IPs driver=<value> +Radio driver to use (default: v4l2 if available, otherwise v4l). +Currently, v4l and v4l2 drivers are supported. +.IPs volume=<0..100> +sound volume for radio device (default 100) +.IPs freq_min=<value> (*BSD BT848 only) +minimum allowed frequency (default: 87.50) +.IPs freq_max=<value> (*BSD BT848 only) +maximum allowed frequency (default: 108.00) +.IPs channels=<frequency>\-<name>,<frequency>\-<name>,... +Set channel list. +Use _ for spaces in names (or play with quoting ;-). +The channel names will then be written using OSD and the slave commands +radio_step_channel and radio_set_channel will be usable for +a remote control (see LIRC). +If given, number in movie URL will be treated as channel position in +channel list. +.br +.I EXAMPLE: +radio://1, radio://104.4, radio_set_channel 1 +.IPs adevice=<value> (with radio capture enabled) +Name of device to capture sound from. +Without such a name capture will be disabled, +even if the capture keyword appears in the URL. +For ALSA devices use it in the form hw=<card>.<device>. +If the device name contains a '=', the module will use +ALSA to capture, otherwise OSS. +.IPs arate=<value> (with radio capture enabled) +Rate in samples per second (default: 44100). +.br +.I NOTE: +When using audio capture set also \-rawaudio rate=<value> option +with the same value as arate. +If you have problems with sound speed (runs too quickly), try to play +with different rate values (e.g.\& 48000,44100,32000,...). +.IPs achannels=<value> (with radio capture enabled) +Number of audio channels to capture. +.RE +. +.TP .B \-rawaudio <option1:option2:...> This option lets you play raw audio files. You have to use \-demuxer rawaudio as well. @@ -1631,69 +1694,6 @@ Can be used with \-vid and \-aid. . .TP -.B \-psprobe <byte position> -When playing an MPEG-PS stream, this option let's you specify how many -bytes in the stream you want MPlayer to scan in order to identify the -video codec used. -This option is needed to play EVO files containing H.264 streams. -. -.TP -.B \-radio <option1:option2:...> (radio only) -These options set various parameters of the radio capture module. -For listening to radio with MPlayer use 'radio://<frequency>' -(if channels option is not given) or 'radio://<channel_number>' -(if channels option is given) as a movie URL. -You can see allowed frequency range by running MPlayer with '\-v'. -To start the grabbing subsystem, use 'radio://<frequency or channel>/capture'. -If the capture keyword is not given you can listen to radio -using the line-in cable only. -Using capture to listen is not recommended due to synchronization -problems, which makes this process uncomfortable. -.sp 1 -Available options are: -.RSs -.IPs device=<value> -Radio device to use (default: /dev/radio0 for Linux and /dev/tuner0 for *BSD). -.IPs driver=<value> -Radio driver to use (default: v4l2 if available, otherwise v4l). -Currently, v4l and v4l2 drivers are supported. -.IPs volume=<0..100> -sound volume for radio device (default 100) -.IPs freq_min=<value> (*BSD BT848 only) -minimum allowed frequency (default: 87.50) -.IPs freq_max=<value> (*BSD BT848 only) -maximum allowed frequency (default: 108.00) -.IPs channels=<frequency>\-<name>,<frequency>\-<name>,... -Set channel list. -Use _ for spaces in names (or play with quoting ;-). -The channel names will then be written using OSD and the slave commands -radio_step_channel and radio_set_channel will be usable for -a remote control (see LIRC). -If given, number in movie URL will be treated as channel position in -channel list. -.br -.I EXAMPLE: -radio://1, radio://104.4, radio_set_channel 1 -.IPs adevice=<value> (with radio capture enabled) -Name of device to capture sound from. -Without such a name capture will be disabled, -even if the capture keyword appears in the URL. -For ALSA devices use it in the form hw=<card>.<device>. -If the device name contains a '=', the module will use -ALSA to capture, otherwise OSS. -.IPs arate=<value> (with radio capture enabled) -Rate in samples per second (default: 44100). -.br -.I NOTE: -When using audio capture set also \-rawaudio rate=<value> option -with the same value as arate. -If you have problems with sound speed (runs too quickly), try to play -with different rate values (e.g.\& 48000,44100,32000,...). -.IPs achannels=<value> (with radio capture enabled) -Number of audio channels to capture. -.RE -. -.TP .B \-tv <option1:option2:...> (TV/\:PVR only) This option tunes various properties of the TV capture module. For watching TV with MPlayer, use 'tv://' or 'tv://<channel_number>'

1 0