November 2006 - MPlayer-DOCS - lists.mplayerhq.hu

r21003 - trunk/DOCS/man/en/mplayer.1
by gpoirier 18 Nov '06

18 Nov '06

Author: gpoirier Date: Sat Nov 18 10:57:52 2006 New Revision: 21003 Modified: trunk/DOCS/man/en/mplayer.1 Log: Xvid3 support is no more: Remove Xvid3-specific options Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 (original) +++ trunk/DOCS/man/en/mplayer.1 Sat Nov 18 10:57:52 2006 @@ -8503,16 +8503,6 @@ which you can activate with \-vf scale=<width>:<height>:1. . .TP -.B "4mv\ \ \ \ " -Use 4 motion vectors per macroblock. -This might give better compression, but slows down encoding. -.br -.I WARNING: -As of Xvid-1.0.x, this option is no longer available separately, and its -functionality is included in the me_quality option. -When me_quality > 4, 4mv is activated. -. -.TP .B rc_reaction_delay_factor=<value> This parameter controls the number of frames the CBR rate controller will wait before reacting to bitrate changes and compensating for them @@ -8560,18 +8550,6 @@ As of Xvid-1.0.x, this option is replaced by the quant_type option. . .TP -.B mod_quant -Decide whether to use MPEG or H.263 quantizers on a frame-by-frame basis -(two pass mode only). -.br -.I WARNING: -This will generate an illegal bitstream, and most likely not be decodable -by any MPEG-4 decoder besides libavcodec or Xvid. -.br -.I WARNING: -As of Xvid-1.0.x, this option is no longer available. -. -.TP .B keyframe_boost=<0\-1000> (two pass mode only) Shift some bits from the pool for other frame types to intra frames, thus improving keyframe quality.

3 2

r21004 - trunk/DOCS/man/en/mplayer.1
by gpoirier 18 Nov '06

18 Nov '06

Author: gpoirier Date: Sat Nov 18 11:08:56 2006 New Revision: 21004 Modified: trunk/DOCS/man/en/mplayer.1 Log: remove xvid3's quant_range, move xvid4 [min|max]_[i|p|b]quant options there instead Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 (original) +++ trunk/DOCS/man/en/mplayer.1 Sat Nov 18 11:08:56 2006 @@ -8522,14 +8522,28 @@ size of the rate control buffer . .TP -.B quant_range=<1\-31>\-<1\-31>[/<1\-31>\-<1\-31>] -CBR mode: min & max quantizer for all frames (default: 2\-31) -.br -two pass mode: min & max quantizer for I/P-frames (default: 2\-31/\:2\-31) -.br -.I WARNING: -As of Xvid-1.0.x, this option is replaced by the -[min|max]_[i|p|b]quant options. +.B min_iquant=<0\-31> +minimum I-frame quantizer (default: 2) +. +.TP +.B max_iquant=<0\-31> +maximum I-frame quantizer (default: 31) +. +.TP +.B min_pquant=<0\-31> +minimum P-frame quantizer (default: 2) +. +.TP +.B max_pquant=<0\-31> +maximum P-frame quantizer (default: 31) +. +.TP +.B min_bquant=<0\-31> +minimum B-frame quantizer (default: 2) +. +.TP +.B max_bquant=<0\-31> +maximum B-frame quantizer (default: 31) . .TP .B min_key_interval=<value> (two pass only) @@ -8762,30 +8776,6 @@ subjective quality and possibly reducing PSNR. . .TP -.B min_iquant=<0\-31> -minimum I-frame quantizer (default: 2) -. -.TP -.B max_iquant=<0\-31> -maximum I-frame quantizer (default: 31) -. -.TP -.B min_pquant=<0\-31> -minimum P-frame quantizer (default: 2) -. -.TP -.B max_pquant=<0\-31> -maximum P-frame quantizer (default: 31) -. -.TP -.B min_bquant=<0\-31> -minimum B-frame quantizer (default: 2) -. -.TP -.B max_bquant=<0\-31> -maximum B-frame quantizer (default: 31) -. -.TP .B quant_intra_matrix=<filename> Load a custom intra matrix file. You can build such a file with xvid4conf's matrix editor.

1 0

r21001 - in trunk: DOCS/man/en/mplayer.1 cfg-common.h configure help/help_mp-en.h stream/stream_radio.c stream/stream_radio.h
by voroshil 18 Nov '06

18 Nov '06

Author: voroshil Date: Sat Nov 18 07:53:33 2006 New Revision: 21001 Modified: trunk/DOCS/man/en/mplayer.1 Changes in other areas also in this revision: Modified: trunk/cfg-common.h trunk/configure trunk/help/help_mp-en.h trunk/stream/stream_radio.c trunk/stream/stream_radio.h Log: Add *BSD BT848 radio support Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 (original) +++ trunk/DOCS/man/en/mplayer.1 Sat Nov 18 07:53:33 2006 @@ -1616,12 +1616,16 @@ Available options are: .RSs .IPs device=<value> -Radio device to use (default: /dev/radio0). +Radio device to use (default: /dev/radio0 for Linux and /dev/tuner0 for *BSD). .IPs driver=<value> Radio driver to use (default: v4l2 if available, otherwise v4l). Currently, v4l and v4l2 drivers are supported. .IPs volume=<0..100> sound volume for radio device (default 100) +.IPs freq_min=<value> (*BSD BT848 only) +minimum allowed frequency (default: 87.50) +.IPs freq_max=<value> (*BSD BT848 only) +maximum allowed frequency (default: 108.00) .IPs channels=<frequency>\-<name>,<frequency>\-<name>,... Set channel list. Use _ for spaces in names (or play with quoting ;-).

1 0

r20993 - in trunk: DOCS/man/en/mplayer.1 input/input.c
by reimar 17 Nov '06

17 Nov '06

Author: reimar Date: Fri Nov 17 20:37:58 2006 New Revision: 20993 Modified: trunk/DOCS/man/en/mplayer.1 Changes in other areas also in this revision: Modified: trunk/input/input.c Log: Since vobsub_lang and sub_select do the same, 'b' and 'j' were bound to the same thing. Remove the binding for 'b'. Modified: trunk/DOCS/man/en/mplayer.1 ============================================================================== --- trunk/DOCS/man/en/mplayer.1 (original) +++ trunk/DOCS/man/en/mplayer.1 Fri Nov 17 20:37:58 2006 @@ -257,7 +257,7 @@ (see \-framedrop and \-hardframedrop). .IPs "v\ \ \ \ " Toggle subtitle visibility. -.IPs "b / j" +.IPs "j\ \ \ \ " Cycle through the available subtitles. .IPs "y and g" Step forward/backward in the subtitle list.

1 0

r20878 - trunk/DOCS/xml/en/video.xml
by torinthiel 15 Nov '06

15 Nov '06

Author: torinthiel Date: Mon Nov 13 11:47:38 2006 New Revision: 20878 Modified: trunk/DOCS/xml/en/video.xml Log: [cosmetics] - fix end-tag not being in the same column as start-tag - some more indentation fixes - blank lines added/removed for consistency and visual markup - visual separation of sect* tags Modified: trunk/DOCS/xml/en/video.xml ============================================================================== --- trunk/DOCS/xml/en/video.xml (original) +++ trunk/DOCS/xml/en/video.xml Mon Nov 13 11:47:38 2006 @@ -35,8 +35,8 @@ <screen> (--) SVGA: PCI: Matrox MGA G400 AGP rev 4, Memory @ 0xd8000000, 0xd4000000 (--) SVGA: Linear framebuffer at 0xD8000000</screen> - </para></listitem> + --></screen> +</para></listitem> <listitem><para> from <filename>/proc/pci</filename> (use <command>lspci -v</command> command): @@ -44,11 +44,11 @@ 01:00.0 VGA compatible controller: Matrox Graphics, Inc.: Unknown device 0525 Memory at d8000000 (32-bit, prefetchable) </screen> - </para></listitem> +</para></listitem> <listitem><para> from mga_vid kernel driver messages (use <command>dmesg</command>): <screen>mga_mem_base = d8000000</screen> - </para></listitem> +</para></listitem> </orderedlist> </para> @@ -85,8 +85,13 @@ </para> </sect1> + + + + <sect1 id="output-trad"> <title>Video outputs for traditional video cards</title> + <sect2 id="xv"> <title>Xv</title> @@ -104,10 +109,10 @@ <orderedlist> <listitem><para> You have to use XFree86 4.0.2 or newer (former versions don't have XVideo) - </para></listitem> +</para></listitem> <listitem><para> Your card actually supports hardware acceleration (modern cards do) - </para></listitem> +</para></listitem> <listitem><para> X loads the XVideo extension, it's something like this: <programlisting>(II) Loading extension XVideo</programlisting> @@ -117,7 +122,7 @@ always loaded, and doesn't mean that the <emphasis role="bold">card's</emphasis> XVideo support is loaded! </para></note> - </para></listitem> +</para></listitem> <listitem><para> Your card has Xv support under Linux. To check, try <command>xvinfo</command>, it is the part of the XFree86 distribution. It @@ -149,7 +154,7 @@ --></screen> It must support YUY2 packed, and YV12 planar pixel formats to be usable with <application>MPlayer</application>. - </para></listitem> +</para></listitem> <listitem><para> And finally, check if <application>MPlayer</application> was compiled with 'xv' support. Do a <command>mplayer -vo help | grep xv </command>. @@ -157,10 +162,11 @@ <screen> xv X11/Xv</screen> - </para></listitem> +</para></listitem> </orderedlist> </para> + <sect3 id="tdfx"> <title>3dfx cards</title> @@ -190,6 +196,7 @@ or greater (in case of image problems, try 16bpp). As for S3 Virge: there is xv support, but the card itself is very slow, so you better sell it. </para> + <para> There is now a native framebuffer driver for S3 Virge cards similiar to tdfxfb. Set up your framebuffer (e.g. append @@ -288,6 +295,7 @@ <sect3 id="trident"> <title>Trident cards</title> + <para> If you want to use Xv with a Trident card, provided that it doesn't work with 4.1.0, install XFree 4.2.0. 4.2.0 adds support for fullscreen Xv @@ -298,12 +306,12 @@ Alternatively, <application>MPlayer</application> contains a <link linkend="vidix">VIDIX</link> driver for the Cyberblade/i1 card. </para> - </sect3> <sect3 id="kyro"> <title>Kyro/PowerVR cards</title> + <para> If you want to use Xv with a Kyro based card (for example Hercules Prophet 4000XT), you should download the drivers from the @@ -442,7 +450,6 @@ server driver module. </para> - <para><programlisting> Section "Modes" Identifier "Modes[0]" @@ -569,32 +576,32 @@ <listitem><simpara> With XFree 4.0.3 and <filename>nv.o</filename> there is a bug resulting in strange colors. - </simpara></listitem> +</simpara></listitem> <listitem><simpara> ATI driver requires to switch mode back more than once after finishing using of DGA. - </simpara></listitem> +</simpara></listitem> <listitem><simpara> Some drivers simply fail to switch back to normal resolution (use <keycap>Ctrl</keycap>+<keycap>Alt</keycap>+<keycap>Keypad +</keycap> and <keycap>Ctrl</keycap>+<keycap>Alt</keycap>+<keycap>Keypad -</keycap> to switch back manually). - </simpara></listitem> +</simpara></listitem> <listitem><simpara> Some drivers simply display strange colors. - </simpara></listitem> +</simpara></listitem> <listitem><simpara> Some drivers lie about the amount of memory they map into the process's address space, thus vo_dga won't use double buffering (SIS?). - </simpara></listitem> +</simpara></listitem> <listitem><simpara> Some drivers seem to fail to report even a single valid mode. In this case the DGA driver will crash telling you about a nonsense mode of 100000x100000 or something like that. - </simpara></listitem> +</simpara></listitem> <listitem><simpara> OSD only works with double buffering enabled (else it flickers). - </simpara></listitem> +</simpara></listitem> </itemizedlist> </sect2> @@ -631,9 +638,9 @@ SDL video output supports displaying subtitles under the movie, on the (if present) black bar. </para> - </sect2> + <sect2 id="svgalib"> <title>SVGAlib</title> @@ -657,7 +664,8 @@ </para> </note> -<formalpara><title>EGA (4BPP) SUPPORT</title> +<formalpara> +<title>EGA (4BPP) SUPPORT</title> <para> SVGAlib incorporates EGAlib, and <application>MPlayer</application> has the possibility to display any movie in 16 colors, thus usable in the following @@ -668,10 +676,10 @@ <itemizedlist> <listitem><simpara> EGA card with EGA monitor: 320x200x4bpp, 640x200x4bpp, 640x350x4bpp - </simpara></listitem> +</simpara></listitem> <listitem><simpara> EGA card with CGA monitor: 320x200x4bpp, 640x200x4bpp - </simpara></listitem> +</simpara></listitem> </itemizedlist> <para> @@ -710,6 +718,7 @@ </para> </sect2> + <sect2 id="fbdev"> <title>Framebuffer output (FBdev)</title> @@ -738,19 +747,19 @@ <term><option>-fb</option></term> <listitem><simpara> specify the framebuffer device to use (default: <filename>/dev/fb0</filename>) - </simpara></listitem> + </simpara></listitem> </varlistentry> <varlistentry> <term><option>-fbmode</option></term> <listitem><simpara> mode name to use (according to <filename>/etc/fb.modes</filename>) - </simpara></listitem> + </simpara></listitem> </varlistentry> <varlistentry> <term><option>-fbmodeconfig</option></term> <listitem><simpara> config file of modes (default: <filename>/etc/fb.modes</filename>) - </simpara></listitem> + </simpara></listitem> </varlistentry> <varlistentry> <term><option>-monitor-hfreq</option></term> @@ -759,7 +768,7 @@ <listitem><simpara> <emphasis role="bold">important</emphasis> values, see <filename>example.conf</filename> - </simpara></listitem> + </simpara></listitem> </varlistentry> </variablelist> @@ -779,11 +788,11 @@ format matches the video mode's pixel format. Pay attention to the bpp value, fbdev driver tries to use the current, or if you specify the <option>-bpp</option> option, then that. - </para></listitem> +</para></listitem> <listitem><para> <option>-zoom</option> option isn't supported (use <option>-vf scale</option>). You can't use 8bpp (or less) modes. - </para></listitem> +</para></listitem> <listitem><para> You possibly want to turn the cursor off: <screen>echo -e '\033[?25l'</screen> @@ -795,7 +804,7 @@ <screen>echo -e '\033[?25h'</screen> or <screen>setterm -cursor on</screen> - </para></listitem> +</para></listitem> </itemizedlist> <note> @@ -807,6 +816,7 @@ </note> </sect2> + <sect2 id="mga_vid"> <title>Matrox framebuffer (mga_vid)</title> @@ -833,13 +843,13 @@ cd drivers make</screen> - </para></step> +</para></step> <step><para> Then create <filename>/dev/mga_vid</filename> device: <screen>mknod /dev/mga_vid c 178 0</screen> and load the driver with <screen>insmod mga_vid.o</screen> - </para></step> +</para></step> <step><para> You should verify the memory size detection using the <command>dmesg</command> command. If it's bad, use the @@ -847,7 +857,7 @@ (<command>rmmod mga_vid</command> first), specify card's memory size in MB: <screen>insmod mga_vid.o mga_ram_size=16</screen> - </para></step> +</para></step> <step><para> To make it load/unload automatically when needed, first insert the following line at the end of <filename>/etc/modules.conf</filename>: @@ -860,7 +870,7 @@ </para><para> Then run <screen>depmod -a</screen> - </para></step> +</para></step> <step><para> Now you have to (re)compile <application>MPlayer</application>, <filename>./configure</filename> will detect @@ -868,7 +878,7 @@ from <application>MPlayer</application> goes by <option>-vo mga</option> if you have matroxfb console, or <option>-vo xmga</option> under XFree86 3.x.x or 4.x.x. - </para></step> +</para></step> </procedure> <para> @@ -884,9 +894,11 @@ </para> </sect2> + <sect2 id="tdfxfb" xreflabel="3Dfx YUV support (tdfxfb)"> <title>3Dfx YUV support</title> + <para> This driver uses the kernel's tdfx framebuffer driver to play movies with YUV acceleration. You'll need a kernel with tdfxfb support, and recompile @@ -895,6 +907,7 @@ </para> </sect2> + <sect2 id="opengl"> <title>OpenGL output</title> @@ -930,9 +943,9 @@ <para> <command>export __GL_SYNC_TO_VBLANK=1</command> </para> - </sect2> + <sect2 id="aalib"> <title>AAlib - text mode displaying</title> @@ -957,28 +970,28 @@ <tbody> <row><entry><keycap>1</keycap></entry><entry> decrease contrast - </entry></row> +</entry></row> <row><entry><keycap>2</keycap></entry><entry> increase contrast - </entry></row> +</entry></row> <row><entry><keycap>3</keycap></entry><entry> decrease brightness - </entry></row> +</entry></row> <row><entry><keycap>4</keycap></entry><entry> increase brightness - </entry></row> +</entry></row> <row><entry><keycap>5</keycap></entry><entry> switch fast rendering on/off - </entry></row> +</entry></row> <row><entry><keycap>6</keycap></entry><entry> set dithering mode (none, error distribution, Floyd Steinberg) - </entry></row> +</entry></row> <row><entry><keycap>7</keycap></entry><entry> invert image - </entry></row> +</entry></row> <row><entry><keycap>8</keycap></entry><entry> toggles between aa and <application>MPlayer</application> control - </entry></row> +</entry></row> </tbody> </tgroup> </informaltable> @@ -989,7 +1002,7 @@ <term><option>-aaosdcolor=<replaceable>V</replaceable></option></term> <listitem><para> change OSD color - </para></listitem> + </para></listitem> </varlistentry> <varlistentry> <term><option>-aasubcolor=<replaceable>V</replaceable></option></term> @@ -1003,7 +1016,7 @@ <literal>3</literal> (bold font), <literal>4</literal> (reverse), <literal>5</literal> (special). - </para></listitem> + </para></listitem> </varlistentry> </variablelist> @@ -1014,25 +1027,25 @@ <term><option>-aadriver</option></term> <listitem><simpara> Set recommended aa driver (X11, curses, Linux). - </simpara></listitem> + </simpara></listitem> </varlistentry> <varlistentry> <term><option>-aaextended</option></term> <listitem><simpara> Use all 256 characters. - </simpara></listitem> + </simpara></listitem> </varlistentry> <varlistentry> <term><option>-aaeight</option></term> <listitem><simpara> Use eight bit ASCII. - </simpara></listitem> + </simpara></listitem> </varlistentry> <varlistentry> <term><option>-aahelp</option></term> <listitem><simpara> Prints out all aalib options. - </simpara></listitem> + </simpara></listitem> </varlistentry> </variablelist> @@ -1062,6 +1075,7 @@ </para> </sect2> + <sect2 id="caca"> <title><systemitem class="library">libcaca</systemitem> - Color ASCII Art library</title> @@ -1089,10 +1103,10 @@ the following:</title> <listitem><simpara> 16 available colors for character output (256 color pairs) - </simpara></listitem> +</simpara></listitem> <listitem><simpara> color image dithering - </simpara></listitem> +</simpara></listitem> </itemizedlist> <itemizedlist> @@ -1100,7 +1114,7 @@ following limitations:</title> <listitem><simpara> no support for brightness, contrast, gamma - </simpara></listitem> +</simpara></listitem> </itemizedlist> <para> @@ -1115,13 +1129,13 @@ <tbody> <row><entry><keycap>d</keycap></entry><entry> Toggle <systemitem class="library">libcaca</systemitem> dithering methods. - </entry></row> +</entry></row> <row><entry><keycap>a</keycap></entry><entry> Toggle <systemitem class="library">libcaca</systemitem> antialiasing. - </entry></row> +</entry></row> <row><entry><keycap>b</keycap></entry><entry> Toggle <systemitem class="library">libcaca</systemitem> background. - </entry></row> +</entry></row> </tbody> </tgroup> </informaltable> @@ -1132,19 +1146,19 @@ <term><option>CACA_DRIVER</option></term> <listitem><simpara> Set recommended caca driver. e.g. ncurses, slang, x11. - </simpara></listitem> + </simpara></listitem> </varlistentry> <varlistentry> <term><option>CACA_GEOMETRY (X11 only)</option></term> <listitem><simpara> Specifies the number of rows and columns. e.g. 128x50. - </simpara></listitem> + </simpara></listitem> </varlistentry> <varlistentry> <term><option>CACA_FONT (X11 only)</option></term> <listitem><simpara> Specifies the font to use. e.g. fixed, nexus. - </simpara></listitem> + </simpara></listitem> </varlistentry> </variablelist> @@ -1155,6 +1169,7 @@ </sect2> + <sect2 id="vesa"> <title>VESA - output to VESA BIOS</title> @@ -1197,22 +1212,22 @@ <listitem><simpara> You have chances to watch movies <emphasis role="bold">if Linux even doesn't know</emphasis> your video hardware. - </simpara></listitem> +</simpara></listitem> <listitem><simpara> You don't need to have installed any graphics' related things on your Linux (like X11 (AKA XFree86), fbdev and so on). This driver can be run from <emphasis role="bold">text-mode</emphasis>. - </simpara></listitem> +</simpara></listitem> <listitem><simpara> You have chances to get <emphasis role="bold">working TV-out</emphasis>. (It's known at least for ATI's cards). - </simpara></listitem> +</simpara></listitem> <listitem><simpara> This driver calls <function>int 10h</function> handler thus it's not an emulator - it calls <emphasis role="bold">real</emphasis> things of <emphasis>real</emphasis> BIOS in <emphasis>real-mode</emphasis> (actually in vm86 mode). - </simpara></listitem> +</simpara></listitem> <listitem><simpara> You can use VIDIX with it, thus getting accelerated video display <emphasis role="bold">and</emphasis> TV output at the same time! @@ -1224,20 +1239,20 @@ (config file, or command line) you will get the highest possible refresh rate. (Using General Timing Formula). To enable this feature you have to specify <emphasis role="bold">all</emphasis> your monitor options. - </simpara></listitem> +</simpara></listitem> </itemizedlist> <itemizedlist spacing="compact"> <title>DISADVANTAGES</title> <listitem><simpara> It works only on <emphasis role="bold">x86 systems</emphasis>. - </simpara></listitem> +</simpara></listitem> <listitem><simpara> It can be used only by <systemitem class="username">root</systemitem>. - </simpara></listitem> +</simpara></listitem> <listitem><simpara> Currently it's available only for <emphasis role="bold">Linux</emphasis>. - </simpara></listitem> +</simpara></listitem> </itemizedlist> <important> @@ -1257,7 +1272,7 @@ double buffering via the <option>-double</option> option. Note: you may omit these parameters to enable <emphasis role="bold">autodetection</emphasis> of dga mode. - </simpara></listitem> + </simpara></listitem> </varlistentry> </variablelist> @@ -1272,28 +1287,29 @@ utility from the Mandrake/Mandriva distribution for example. (<emphasis role="bold">Hint</emphasis>: The same utility is used for localization of fbdev). - </simpara></listitem> +</simpara></listitem> <listitem><simpara> Some <emphasis role="bold">Linux graphics drivers</emphasis> don't update active <emphasis role="bold">BIOS mode</emphasis> in DOS memory. So if you have such problem - always use VESA driver only from <emphasis role="bold">text-mode</emphasis>. Otherwise text-mode (#03) will be activated anyway and you will need restart your computer. - </simpara></listitem> +</simpara></listitem> <listitem><simpara> Often after terminating VESA driver you get <emphasis role="bold">black</emphasis> screen. To return your screen to original state - simply switch to other console (by pressing <keycap>Alt</keycap>+<keycap>F<x></keycap>) then switch to your previous console by the same way. - </simpara></listitem> +</simpara></listitem> <listitem><simpara> To get <emphasis role="bold">working TV-out</emphasis> you need have plugged TV-connector in before booting your PC since video BIOS initializes itself only once during POST procedure. - </simpara></listitem> +</simpara></listitem> </itemizedlist> </sect2> + <sect2 id="x11"> <title>X11</title> @@ -1323,7 +1339,7 @@ <listitem><simpara> If you have XFree86 4.x.x: use the <option>-vm</option> option. It will change to a resolution your movie fits in. If it doesn't: - </simpara></listitem> +</simpara></listitem> <listitem><simpara> With XFree86 3.x.x: you have to cycle through available resolutions with the @@ -1331,7 +1347,7 @@ and <keycap>Ctrl</keycap>+<keycap>Alt</keycap>+<keycap>minus</keycap> keys. - </simpara></listitem> +</simpara></listitem> </itemizedlist> </para> @@ -1342,6 +1358,7 @@ </para> </sect2> + <sect2 id="vidix"> <title>VIDIX</title> @@ -1378,8 +1395,9 @@ in the device section. You should set this to the amount of memory installed on your card minus 4MB. If you have less than 8MB of video ram, you can use the option "XaaNoPixmapCache" in the screen section instead. - </simpara></listitem> -<listitem><simpara> +</simpara></listitem> +<listitem> + <simpara> There is a console VIDIX driver: <option>-vo cvidix</option>. This requires a working and initialized framebuffer for most cards (or else you'll just mess up the screen), and you'll have a similar effect as with @@ -1397,13 +1415,14 @@ On the other hand, <option>-colorkey 0</option> should give you a video running in the "background", though this depends on the colorkey functionality to work right. - </simpara></listitem> + </simpara> +</listitem> <listitem><simpara> You can use VIDIX subdevice which was applied to several video output drivers, such as: <option>-vo vesa:vidix</option> (<emphasis role="bold">Linux only</emphasis>) and <option>-vo fbdev:vidix</option>. - </simpara></listitem> +</simpara></listitem> </itemizedlist> <para> @@ -1416,12 +1435,12 @@ <listitem><simpara> Video card should be in graphics mode (except nVidia cards with the <option>-vo cvidix</option> output driver). - </simpara></listitem> +</simpara></listitem> <listitem><simpara> <application>MPlayer</application>'s video output driver should know active video mode and be able to tell to VIDIX subdevice some video characteristics of server. - </simpara></listitem> +</simpara></listitem> </itemizedlist> <formalpara> @@ -1437,14 +1456,13 @@ recognizes the following options: <option>-fs -zoom -x -y -double</option>. </para> </formalpara> + <para> Also you can specify VIDIX's driver directly as third subargument in command line: - <screen>mplayer -vo xvidix:mga_vid.so -fs -zoom -double <replaceable>file.avi</replaceable></screen> or <screen>mplayer -vo vesa:vidix:radeon_vid.so -fs -zoom -double -bpp 32 <replaceable>file.avi</replaceable></screen> - But it's dangerous, and you shouldn't do that. In this case given driver will be forced and result is unpredictable (it may <emphasis role="bold">freeze</emphasis> your computer). You should do that @@ -1468,33 +1486,35 @@ download a version made by Alex especially for usage with <application>MPlayer</application> (it doesn't need the svgalib source to compile) from <ulink url="http://www.mplayerhq.hu/MPlayer/contrib/svgalib/svgalib_helper-1.9.17-mplay…">here</ulink>. - </para></step> +</para></step> <step><para> Compile the module in the <filename class="directory">svgalib_helper</filename> directory (it can be found inside the <filename class="directory">svgalib-1.9.17/kernel/</filename> directory if you've downloaded the source from the svgalib site) and insmod it. - </para></step> +</para></step> <step><para> To create the necessary devices in the <filename class="directory">/dev</filename> directory, do a <screen>make device</screen> in the <filename class="directory">svgalib_helper</filename> dir, as root. - </para></step> +</para></step> <step><para> Move the <filename class="directory">svgalib_helper</filename> directory to <filename class="directory">mplayer/main/libdha/svgalib_helper</filename>. - </para></step> +</para></step> <step><para> Required if you download the source from the svgalib site: Remove the comment before the CFLAGS line containing "svgalib_helper" string from the <filename class="directory">libdha/Makefile</filename>. - </para></step> +</para></step> <step><para> Recompile and install libdha. - </para></step> +</para></step> </procedure> + <sect3 id="vidix-ati"> <title>ATI cards</title> + <para> Currently most ATI cards are supported natively, from Mach64 to the newest Radeons. @@ -1507,8 +1527,10 @@ </para> </sect3> + <sect3 id="vidix-mga"> <title>Matrox cards</title> + <para> Matrox G200, G400, G450 and G550 have been reported to work. </para> @@ -1519,8 +1541,10 @@ </para> </sect3> + <sect3 id="vidix-trident"> <title>Trident cards</title> + <para> There is a driver available for the Trident Cyberblade/i1 chipset, which can be found on VIA Epia motherboards. @@ -1532,14 +1556,17 @@ </para> </sect3> + <sect3 id="vidix-3dlabs"> <title>3DLabs cards</title> + <para> Although there is a driver for the 3DLabs GLINT R3 and Permedia3 chips, no one has tested it, so reports are welcome. </para> </sect3> + <sect3 id="vidix-nvidia"> <title>nVidia cards</title> @@ -1550,11 +1577,12 @@ <option>cvidix</option> video output, as the following example shows: <screen>mplayer -vo cvidix <replaceable>example.avi</replaceable></screen> </para> - </sect3> + <sect3 id="vidix-sis"> <title>SiS cards</title> + <para> This is very experimental code, just like nvidia_vid. </para> @@ -1570,8 +1598,11 @@ </sect3> </sect2> + + <sect2 id="directfb"> <title>DirectFB</title> + <blockquote><para> "DirectFB is a graphics library which was designed with embedded systems in mind. It offers maximum hardware accelerated performance at a minimum @@ -1595,8 +1626,11 @@ </para> </sect2> + + <sect2 id="dfbmga"> <title>DirectFB/Matrox (dfbmga)</title> + <para> Please read the <link linkend="directfb">main DirectFB</link> section for general information. @@ -1626,11 +1660,16 @@ </sect2> </sect1> + + + + <sect1 id="mpeg_decoders"> <title>MPEG decoders</title> <sect2 id="dvb"> <title>DVB output and input</title> + <para> <application>MPlayer</application> supports cards with the Siemens DVB chipset from vendors like Siemens, Technotrend, Galaxis or Hauppauge. The latest DVB @@ -1878,8 +1917,11 @@ </para> </sect2> + + <sect2 id="dxr2"> <title>DXR2</title> + <para><application>MPlayer</application> supports hardware accelerated playback with the Creative DXR2 card.</para> <para> @@ -1918,8 +1960,11 @@ <para>Please see the man page for available options.</para> </sect2> + + <sect2 id="dxr3"> <title>DXR3/Hollywood+</title> + <para> <application>MPlayer</application> supports hardware accelerated playback with the Creative DXR3 and Sigma Designs Hollywood Plus cards. These cards @@ -2038,9 +2083,12 @@ </varlistentry> </variablelist> </sect2> - </sect1> + + + + <sect1 id="other"> <title>Other visualization hardware</title> @@ -2139,8 +2187,11 @@ </para> </sect2> + + <sect2 id="blinkenlights"> <title>Blinkenlights</title> + <para> This driver is capable of playback using the Blinkenlights UDP protocol. If you don't know what <ulink url="http://www.blinkenlights.de/">Blinkenlights</ulink> @@ -2156,6 +2207,10 @@ </sect2> </sect1> + + + + <sect1 id="tvout"> <title>TV-out support</title> @@ -2190,11 +2245,12 @@ and has <emphasis role="bold">Macrovision</emphasis> copy protection enabled (you can "workaround" Macrovision using this <ulink url="http://avifile.sf.net/mgamacro.pl">perl script</ulink>). - </para></listitem> + </para></listitem> </varlistentry> <varlistentry> <term>Framebuffer</term> - <listitem><para> + <listitem> + <para> Using the <emphasis role="bold">matroxfb modules</emphasis> in the 2.4 kernels. 2.2 kernels don't have the TVout feature in them, thus unusable for this. You have to enable ALL matroxfb-specific feature during compilation @@ -2208,23 +2264,23 @@ <command>./compile.sh</command>. Install <filename>TVout/matroxset/matroxset</filename> somewhere into your <envar>PATH</envar>. - </para></step> + </para></step> <step><para> If you don't have <command>fbset</command> installed, put <filename>TVout/fbset/fbset</filename> somewhere into your <envar>PATH</envar>. - </para></step> + </para></step> <step><para> If you don't have <command>con2fb</command> installed, put <filename>TVout/con2fb/con2fb</filename> somewhere into your <envar>PATH</envar>. - </para></step> + </para></step> <step><para> Then enter into the <filename class="directory">TVout/</filename> directory in the <application>MPlayer</application> source, and execute <filename>./modules</filename> as root. Your text-mode console will enter into framebuffer mode (no way back!). - </para></step> + </para></step> <step><para> Next, EDIT and run the <filename>./matroxtv</filename> script. This will present you to a very simple menu. Press <keycap>2</keycap> and @@ -2233,7 +2289,7 @@ picture has some weird stripes on it, the script wasn't able to set the resolution correctly (to 640x512 by default). Try other resolutions from the menu and/or experiment with fbset. - </para></step> + </para></step> <step><para> Yoh. Next task is to make the cursor on tty1 (or whatever) to disappear, and turn off screen blanking. Execute the following @@ -2253,7 +2309,7 @@ screen. To turn the cursor back: <screen>echo -e '\033[?25h'</screen> or <screen>setterm -cursor on</screen> - </para></step> + </para></step> <step><para> Yeah kewl. Start movie playing with <screen> @@ -2268,7 +2324,7 @@ <step><para> <emphasis role="bold">Enjoy the ultra-fast ultra-featured Matrox TV output (better than Xv)!</emphasis> - </para></step> + </para></step> </procedure> </listitem> </varlistentry> @@ -2301,8 +2357,11 @@ </formalpara> </sect2> + + <sect2 id="tv-out_matrox_g450"> <title>Matrox G450/G550 cards</title> + <para> TV output support for these cards has only been recently introduced, and is not yet in the mainstream kernel. Currently the <emphasis role="bold">mga_vid</emphasis> @@ -2327,6 +2386,7 @@ </para> </sect2> + <sect2 id="tvout-ati"> <title>ATI cards</title> @@ -2344,21 +2404,21 @@ <listitem><simpara> <emphasis role="bold">ATI Mach64</emphasis>: supported by <ulink url="http://gatos.sf.net">GATOS</ulink>. - </simpara></listitem> +</simpara></listitem> <listitem><simpara> <emphasis role="bold">ASIC Radeon VIVO</emphasis>: supported by <ulink url="http://gatos.sf.net">GATOS</ulink>. - </simpara></listitem> +</simpara></listitem> <listitem><simpara> <emphasis role="bold">Radeon</emphasis> and <emphasis role="bold">Rage128</emphasis>: supported by <application>MPlayer</application>! Check <link linkend="vesa">VESA driver</link> and <link linkend="vidix">VIDIX</link> sections. - </simpara></listitem> +</simpara></listitem> <listitem><simpara> <emphasis role="bold">Rage Mobility P/M, Radeon, Rage 128, Mobility M3/M4</emphasis>: supported by <ulink url="http://www.stud.uni-hamburg.de/users/lennart/projects/atitvout/">atitvout</ulink>. - </simpara></listitem> +</simpara></listitem> </itemizedlist> <para> @@ -2373,9 +2433,11 @@ </para> </sect2> + <sect2 id="tvout-nvidia"> <title>nVidia</title> + <para> First, you MUST download the closed-source drivers from <ulink url="http://nvidia.com"/>. I will not describe the installation and configuration process because it does not cover @@ -2412,8 +2474,11 @@ </para> </sect2> + + <sect2 id="tvout-neomagic"> <title>NeoMagic</title> + <para> The NeoMagic chip is found in a variety of laptops, some of them are equipped with a simple analog TV encoder, some have a more advanced one. @@ -2438,8 +2503,9 @@ half your laptop's LCD screen. To switch to TV hit <keycap>Fn</keycap>+<keycap>F5</keycap> three times. Tested on a Tecra 8000, 2.6.15 kernel with vesafb, ALSA v1.0.10. - </para></listitem> -<listitem><simpara> +</para></listitem> +<listitem> + <simpara> <emphasis role="bold">Chrontel 70xx encoder chip</emphasis>: Found in IBM Thinkpad 390E and possibly other Thinkpads or notebooks. </simpara><simpara>

3 3

r20933 - trunk/DOCS/xml/en/install.xml
by diego 15 Nov '06

15 Nov '06

Author: diego Date: Tue Nov 14 22:20:48 2006 New Revision: 20933 Modified: trunk/DOCS/xml/en/install.xml Log: libvorbis is not necessary for Vorbis playback, small wording improvement. Modified: trunk/DOCS/xml/en/install.xml ============================================================================== --- trunk/DOCS/xml/en/install.xml (original) +++ trunk/DOCS/xml/en/install.xml Tue Nov 14 22:20:48 2006 @@ -85,9 +85,6 @@ <emphasis role="bold">libogg</emphasis> - optional, needed for playing OGG file format. </para></listitem> <listitem><para> - <emphasis role="bold">libvorbis</emphasis> - optional, needed for playing OGG Vorbis audio. - </para></listitem> -<listitem><para> <emphasis role="bold"><ulink url="http://www.live555.com/mplayer/">LIVE555 Streaming Media</ulink></emphasis> - optional, needed for playing RTSP/RTP streams. </para></listitem> @@ -103,7 +100,7 @@ support. At least 1.2.7 is required. </para></listitem> <listitem><para> - <emphasis role="bold">libsmb</emphasis> - optional, for Samba support. + <emphasis role="bold">libsmb</emphasis> - optional, for smb networking support </para></listitem> <listitem><para> <emphasis role="bold">ALSA</emphasis> - optional, for ALSA audio output

3 2

[RFC] converting documentation to UTF-8
by Diego Biurrun 15 Nov '06

15 Nov '06

So I've finally taken the plunge and converted my system to UTF-8. Apart from getting more spam in legible characters now I can look at translations and see the right characters when I convert them with iconv. This makes me think that the moment to convert everything to UTF-8 may have come. Others have been lobbying for it before, I'm willing to go along now. Is there anything that speaks against the conversion? Will it cause problems for translators? Any volunteers to do it? Diego

11 38

r20940 - in trunk/DOCS/xml: html-common.xsl pl/Makefile pl/html-chunk.xsl pl/html-common.xsl pl/html-single.xsl ru/Makefile ru/html-chunk.xsl ru/html-common.xsl ru/html-single.xsl
by diego 15 Nov '06

15 Nov '06

Author: diego Date: Wed Nov 15 11:37:41 2006 New Revision: 20940 Modified: trunk/DOCS/xml/html-common.xsl Changes in other areas also in this revision: Removed: trunk/DOCS/xml/pl/html-chunk.xsl trunk/DOCS/xml/pl/html-common.xsl trunk/DOCS/xml/pl/html-single.xsl trunk/DOCS/xml/ru/html-chunk.xsl trunk/DOCS/xml/ru/html-common.xsl trunk/DOCS/xml/ru/html-single.xsl Modified: trunk/DOCS/xml/pl/Makefile trunk/DOCS/xml/ru/Makefile Log: Output UTF-8 instead of legacy encodings by default. Modified: trunk/DOCS/xml/html-common.xsl ============================================================================== --- trunk/DOCS/xml/html-common.xsl (original) +++ trunk/DOCS/xml/html-common.xsl Wed Nov 15 11:37:41 2006 @@ -8,6 +8,9 @@ Set parameters ************** --> + <xsl:param name="chunker.output.encoding" select="'utf-8'"/> + <xsl:output encoding="utf-8"/> + <xsl:param name="toc.section.depth" select="'4'"/> <xsl:param name="html.stylesheet" select="'default.css'"/>

1 0

[homepage]: r2746 - trunk/src/news.src.en
by diego 14 Nov '06

14 Nov '06

Author: diego Date: Tue Nov 14 16:56:58 2006 New Revision: 2746 Modified: trunk/src/news.src.en Log: small grammar fix Modified: trunk/src/news.src.en ============================================================================== --- trunk/src/news.src.en (original) +++ trunk/src/news.src.en Tue Nov 14 16:56:58 2006 @@ -21,7 +21,7 @@ <p> The highlights of this release are native VC-1/WMV3, On2 VP5 and VP62 (used in some Flash video files) decoding, which works even on -non-Intel platforms and SSA/ASS/color subtitles. +non-Intel platforms, and SSA/ASS/color subtitles. </p> <p>

1 0

[homepage]: r2745 - trunk/src/dload.src.en
by diego 14 Nov '06

14 Nov '06

Author: diego Date: Tue Nov 14 16:56:28 2006 New Revision: 2745 Modified: trunk/src/dload.src.en Log: link fix: The old_stuff directory is not mirrored. Modified: trunk/src/dload.src.en ============================================================================== --- trunk/src/dload.src.en (original) +++ trunk/src/dload.src.en Tue Nov 14 16:56:28 2006 @@ -225,12 +225,12 @@ <p> We keep the <a href="http://www.mplayerhq.hu/MPlayer/releases/">old releases</a> and - <a href="http://www.mplayerhq.hu/MPlayer/old_stuff/releases/">ancient releases</a> + <a href="http://www1.mplayerhq.hu/MPlayer/old_stuff/releases/">ancient releases</a> of MPlayer, in case anybody is interested. </p> <p> - The <a href="http://www.mplayerhq.hu/MPlayer/old_stuff/snapshots/">old</a> + The <a href="http://www1.mplayerhq.hu/MPlayer/old_stuff/snapshots/">old</a> CVS snapshots are also available and useful for debugging and finding regressions. </p>

1 0