CVS change done by Diego Biurrun CVS
Update of /cvsroot/mplayer/main/DOCS/man/en
In directory mail:/var2/tmp/cvs-serv13275
Modified Files:
mplayer.1
Log Message:
Unify the handling of escaped spaces.
Index: mplayer.1
===================================================================
RCS file: /cvsroot/mplayer/main/DOCS/man/en/mplayer.1,v
retrieving revision 1.1215
retrieving revision 1.1216
diff -u -r1.1215 -r1.1216
--- mplayer.1 29 Jan 2006 02:08:40 -0000 1.1215
+++ mplayer.1 29 Jan 2006 02:11:38 -0000 1.1216
@@ -571,7 +571,7 @@
instead of the builtin codecs.conf.
.
.TP
-.B \-include <configuration\ file>
+.B \-include <configuration file>
Specify configuration file to be parsed after the default ones.
.
.TP
@@ -670,17 +670,17 @@
.TP
.B \-autosync <factor>
Gradually adjusts the A/\:V sync based on audio delay measurements.
-Specifying \-autosync\ 0, the default, will cause frame timing to be based
+Specifying \-autosync 0, the default, will cause frame timing to be based
entirely on audio delay measurements.
-Specifying \-autosync\ 1 will do the same, but will subtly change the A/\:V
+Specifying \-autosync 1 will do the same, but will subtly change the A/V
correction algorithm.
An uneven video framerate in a movie which plays fine with \-nosound can
often be helped by setting this to an integer value greater than 1.
The higher the value, the closer the timing will be to \-nosound.
-Try \-autosync\ 30 to smooth out problems with sound drivers which do
+Try \-autosync 30 to smooth out problems with sound drivers which do
not implement a perfect audio delay measurement.
With this value, if large A/\:V sync offsets occur, they will only take about
-1 or 2\ seconds to settle out.
+1 or 2 seconds to settle out.
This delay in reaction time to sudden A/\:V offsets should be the only
side-effect of turning this option on, for all sound drivers.
.
@@ -943,7 +943,7 @@
(if present) with the chosen audio stream.
.
.TP
-.B \-alang <language\ code[,language\ code,...]> (also see \-aid)
+.B \-alang <language code[,language code,...]> (also see \-aid)
Specify a priority list of audio languages to use.
Different container formats employ different language codes.
DVDs use ISO 639-1 two letter language codes, Matroska and NUT use ISO 639-2
@@ -1031,7 +1031,7 @@
Force minimum overlap search during verification to <value> sectors.
.IPs toc-bias
Assume that the beginning offset of track 1 as reported in the TOC will be
-addressed as LBA\ 0.
+addressed as LBA 0.
Some Toshiba drives need this for getting track boundaries correct.
.IPs toc-offset=<value>
Add <value> sectors to the values reported when addressing tracks.
@@ -1041,7 +1041,7 @@
.RE
.
.TP
-.B \-cdrom-device <path\ to\ device>
+.B \-cdrom-device <path to device>
Specify the CD-ROM device (default: /dev/\:cdrom).
.
.TP
@@ -1074,7 +1074,7 @@
.PD 1
.
.TP
-.B \-chapter <chapter\ ID>[\-<end\ chapter\ ID>] (DVD only)
+.B \-chapter <chapter ID>[\-<endchapter ID>] (DVD only)
Specify which chapter to start playing at.
Optionally specify which chapter to end playing at (default: 1).
.
@@ -1146,7 +1146,7 @@
.PD 1
.
.TP
-.B \-dvd-device <path\ to\ device> (DVD only)
+.B \-dvd-device <path to device> (DVD only)
Specify the DVD device (default: /dev/\:dvd).
You can also specify a directory that contains files previously copied directly
from a DVD (with e.g.\& vobcopy).
@@ -1154,7 +1154,7 @@
copy DVD titles in the first place (see the examples).
.
.TP
-.B \-dvdangle <angle\ ID> (DVD only)
+.B \-dvdangle <angle ID> (DVD only)
Some DVD discs contain scenes that can be viewed from multiple angles.
Here you can tell MPlayer which angles to use (default: 1).
.
@@ -1350,7 +1350,7 @@
This option is obsolete now that MPlayer has OpenDML support.
.
.TP
-.B \-sb <byte\ position> (also see \-ss)
+.B \-sb <byte position> (also see \-ss)
Seek to byte position.
Useful for playback from CD-ROM images or VOB files with junk at the beginning.
.
@@ -1379,7 +1379,7 @@
.IPs "\-ss 56"
Seeks to 56 seconds.
.IPs "\-ss 01:10:00"
-Seeks to 1\ hour 10\ min.
+Seeks to 1 hour 10 min.
.RE
.PD 1
.
@@ -1389,7 +1389,7 @@
Sometimes needed to play corrupted MPEG-TS files.
.
.TP
-.B \-tsprobe <byte\ position>
+.B \-tsprobe <byte position>
When playing an MPEG-TS stream, this option lets you specify how many
bytes in the stream you want MPlayer to search for the desired
audio and video IDs.
@@ -1622,7 +1622,7 @@
instead of at the end.
.
.TP
-.B \-font <path\ to\ font.desc\ file> (OSD only)
+.B \-font <path to font.desc file> (OSD only)
Search for the OSD/\:SUB fonts in an alternative directory (default for normal
fonts: ~/\:.mplayer/\:font/\:font.desc, default for FreeType fonts:
~/.mplayer/\:subfont.ttf).
@@ -1652,12 +1652,12 @@
\-slang.
.
.TP
-.B \-fribidi-charset <charset\ name> (FriBiDi only)
+.B \-fribidi-charset <charset name> (FriBiDi only)
Specifies the character set that will be passed to FriBiDi when
decoding non-UTF-8 subtitles (default: ISO8859-8).
.
.TP
-.B \-ifo <VOBsub\ ifo\ file>
+.B \-ifo <VOBsub IFO file>
Indicate the file that will be used to load palette and frame size for VOBsub
subtitles.
.
@@ -1698,7 +1698,7 @@
If you cannot select one of the subtitles on a DVD, also try \-vobsubid.
.
.TP
-.B \-slang <language\ code[,language\ code,...]> (also see \-sid)
+.B \-slang <language code[,language code,...]> (also see \-sid)
Specify a priority list of subtitle languages to use.
Different container formats employ different language codes.
DVDs use ISO 639-1 two letter language codes, Matroska uses ISO 639-2
@@ -1955,7 +1955,7 @@
Tells MPlayer to handle the subtitle file as UTF-8.
.
.TP
-.B \-vobsub <VOBsub\ file\ without\ extension>
+.B \-vobsub <VOBsub file without extension>
Specify a VOBsub file to use for subtitles.
Has to be the full pathname without extension, i.e.\& without
the '.idx', '.ifo' or '.sub'.
@@ -2140,7 +2140,7 @@
.IPs "<output device name>"
Explicitly choose the output device/\:interface to use
(default: system-wide default).
-For example, 'Analog\ Out' or 'Digital\ Out'.
+For example, 'Analog Out' or 'Digital Out'.
.RE
.PD 1
.
@@ -2432,7 +2432,7 @@
.PD 1
.
.TP
-.B \-guiwid <window\ ID> (also see \-wid) (GUI only)
+.B \-guiwid <window ID> (also see \-wid) (GUI only)
This tells the GUI to also use an X11 window and stick itself to the bottom
of the video, which is useful to embed a mini-GUI in a browser (with the
MPlayer plugin for instance).
@@ -2553,7 +2553,7 @@
Enables VBI for the vesa, dfbmga and svga video output drivers.
.
.TP
-.B \-wid <window\ ID> (also see \-guiwid) (X11, OpenGL and DirectX only)
+.B \-wid <window ID> (also see \-guiwid) (X11, OpenGL and DirectX only)
This tells MPlayer to attach to an existing window.
Useful to embed MPlayer in a browser (e.g.\& the plugger extension).
.
@@ -3790,7 +3790,7 @@
.PD 1
.
.TP
-.B \-sws <software\ scaler\ type> (also see \-vf scale and \-zoom)
+.B \-sws <software scaler type> (also see \-vf scale and \-zoom)
Specify the software scaler algorithm to be used with the \-zoom option.
This affects video output drivers which lack hardware acceleration, e.g.\& x11.
.sp 1
@@ -6712,7 +6712,7 @@
.
.TP
.B vqmin=<1\-31>
-minimum quantizer (pass\ 1/\:2)
+minimum quantizer (pass 1/\:2)
.RSs
.IPs 1
Not recommended (much larger file, little quality difference and weird side
@@ -6759,7 +6759,7 @@
.TP
.B vqdiff=<1\-31>
maximum quantizer difference between consecutive I- or P-frames
-(pass\ 1/\:2) (default: 3)
+(pass 1/\:2) (default: 3)
.
.TP
.B vmax_b_frames=<0\-4>
@@ -7002,7 +7002,7 @@
.
.TP
.B vbitrate=<value>
-Specify bitrate (pass\ 1/\:2) (default: 800).
+Specify bitrate (pass 1/\:2) (default: 800).
.br
.I WARNING:
1kbit = 1000 bits
@@ -7028,17 +7028,17 @@
.
.TP
.B vrc_maxrate=<value>
-maximum bitrate in kbit/\:sec (pass\ 1/\:2)
+maximum bitrate in kbit/\:sec (pass 1/\:2)
(default: 0, unlimited)
.
.TP
.B vrc_minrate=<value>
-minimum bitrate in kbit/\:sec (pass\ 1/\:2)
+minimum bitrate in kbit/\:sec (pass 1/\:2)
(default: 0, unlimited)
.
.TP
.B vrc_buf_size=<value>
-buffer size in kbit (pass\ 1/\:2).
+buffer size in kbit (pass 1/\:2).
For MPEG-1/2 this also sets the vbv buffer size, use 327 for VCD,
917 for SVCD and 1835 for DVD.
.
@@ -7052,19 +7052,19 @@
.
.TP
.B vb_qfactor=<-31.0\-31.0>
-quantizer factor between B- and non-B-frames (pass\ 1/\:2) (default: 1.25)
+quantizer factor between B- and non-B-frames (pass 1/\:2) (default: 1.25)
.
.TP
.B vi_qfactor=<-31.0\-31.0>
-quantizer factor between I- and non-I-frames (pass\ 1/\:2) (default: 0.8)
+quantizer factor between I- and non-I-frames (pass 1/\:2) (default: 0.8)
.
.TP
.B vb_qoffset=<-31.0\-31.0>
-quantizer offset between B- and non-B-frames (pass\ 1/\:2) (default: 1.25)
+quantizer offset between B- and non-B-frames (pass 1/\:2) (default: 1.25)
.
.TP
.B vi_qoffset=<-31.0\-31.0>
-(pass\ 1/\:2) (default: 0.0)
+(pass 1/\:2) (default: 0.0)
.br
if v{b|i}_qfactor > 0
.br
@@ -7100,7 +7100,7 @@
.
.TP
.B vqcomp=<0.0\-1.0>
-Quantizer compression, vrc_eq depends upon this (pass\ 1/\:2) (default: 0.5).
+Quantizer compression, vrc_eq depends upon this (pass 1/\:2) (default: 0.5).
For instance, assuming the default rate control equation is used,
if vqcomp=1.0, the ratecontrol allocates to each frame the number of bits
needed to encode them all at the same QP.
@@ -7112,7 +7112,7 @@
.
.TP
.B vrc_eq=<equation>
-main ratecontrol equation (pass\ 1/\:2)
+main ratecontrol equation (pass 1/\:2)
.RE
.RSs
.IPs 1\ \ \ \
@@ -7185,7 +7185,7 @@
.
.TP
.B vrc_override=<options>
-User specified quality for specific parts (ending, credits, ...) (pass\ 1/\:2).
+User specified quality for specific parts (ending, credits, ...) (pass 1/\:2).
The options are <start-frame>, <end-frame>, <quality>[/\:<start-frame>,
<end-frame>, <quality>[/\:...]]:
.PD 0
@@ -7199,7 +7199,7 @@
.
.TP
.B vrc_init_cplx=<0\-1000>
-initial complexity (pass\ 1)
+initial complexity (pass 1)
.
.TP
.B vrc_init_occupancy=<0.0\-1.0>
@@ -7207,7 +7207,7 @@
.
.TP
.B vqsquish=<0|1>
-Specify how to keep the quantizer between qmin and qmax (pass\ 1/\:2).
+Specify how to keep the quantizer between qmin and qmax (pass 1/\:2).
.PD 0
.RSs
.IPs 0
