May 2008 - MPlayer-dev-eng - lists.mplayerhq.hu

[PATCH] add support of compression algorithm 3 in mkv demuxer
by Alexander Beregalov 02 Jan '12

02 Jan '12

Specs from http://www.matroska.org/technical/specs/ : ContentCompAlgo The compression algorithm used. Algorithms that have been specified so far are: 0 - zlib, 1 - bzlib, 2 - lzo1x, 3 - Header Stripping. ContentCompSettings Settings that might be needed by the decompressor. For Header Stripping (ContentCompAlgo=3), the bytes that were removed from the beggining of each frames of the track. I have such file, it works for me. | + A track | + Track number: 2 | + Track UID: 2 | + Track type: audio | + Lacing flag: 1 | + Default flag: 1 | + Codec ID: A_AC3 | + Content encodings | + Content encoding | + Content compression | + Algorithm: 3 (header removal) | + Settings: length 2, data: 0x0b 0x77 See an attachment. Please comment.

7 21

rtp support in mplayer
by chas williams - CONTRACTOR 30 Apr '10

30 Apr '10

while trying to play from rtp/mpeg-es streams i found i needed the following patch: --- stream/rtp.c.000 2008-05-13 17:37:23.000000000 -0400 +++ stream/rtp.c 2008-05-13 18:02:02.000000000 -0400 @@ -246,6 +246,9 @@ headerSize = 12 + 4*rh->b.cc; /* in bytes */ + if (rh->b.pt == 32) /* 32 = MPV from RFC 1890 */ + headerSize += 4; /* skip MPEG video-specific header RFC 2250 */ + *lengthData = lengthPacket - headerSize; *data = (char*) buf + headerSize; to skip over the 4-byte mpeg header present in the file. however, after looking at mplayer a bit harder, i see that there are two rtp decoders/demuxers. the one supplied in libavformat (apparently derived from ffmpeg) seems like it has more smarts. which one should i be using?

4 13

Another sample from norway
by Håkon Alstadheim 27 Aug '09

27 Aug '09

This is just to motivate anybody having a spare 5 minutes into working receiving the norwegian dvb-t broadcasts ... (should also interest people from NZ) :-) I've uploaded another sample to incoming, filename hakon.alstadheim.priv.no.nrk3.ts. Attaching the standard output and error when playing below. As you can see I have patched my mplayer to force 25 fps framerate. Seems that patch no longer works as intended, but the straight (non-patched) mplayer gives similarily discouraging results when viewing. Happy hacking everybody :-) . If you want more debugging output, just tell me what and I'll try to comply. -------------------- MPlayer dev-SVN-r26171-4.1.2 (C) 2000-2008 MPlayer Team CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz (Family: 15, Model: 2, Stepping: 4) CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2 Playing hakon.alstadheim.priv.no.nrk3.ts. TS file format detected. VIDEO H264(pid=521) AUDIO AAC(pid=676) NO SUBS (yet)! PROGRAM N. 103 FPS seems to be: 25.000000 ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264) ========================================================================== ========================================================================== Opening audio decoder: [faad] AAC (MPEG2/4 Advanced Audio Coding) versionA not supported FAAD: compressed input bitrate missing, assuming 128kbit/s! AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400) Selected audio codec: [faad] afm: faad (FAAD AAC (MPEG-2/MPEG-4 Audio) decoder) ========================================================================== AO: [oss] 44100Hz 2ch s16le (2 bytes per sample) Starting playback... FAAD: error: Channel coupling not yet implemented, trying to resync! FAAD: error: Invalid number of channels, trying to resync! FAAD: error: Gain control not yet implemented, trying to resync! FAAD: error: Invalid number of channels, trying to resync! FAAD: error: Gain control not yet implemented, trying to resync! FAAD: error: Invalid number of channels, trying to resync! FAAD: error: Invalid number of channels, trying to resync! FAAD: error: Gain control not yet implemented, trying to resync! FAAD: error: Invalid number of channels, trying to resync! FAAD: error: Invalid number of channels, trying to resync! FAAD: Failed to decode frame: Invalid number of channels [h264 @ 0x88d3070]left block unavailable for requested intra mode at 0 4 [h264 @ 0x88d3070]error while decoding MB 0 4, bytestream (24666) FAAD: error: Channel coupling not yet implemented, trying to resync! FAAD: error: Maximum number of scalefactor bands exceeded, trying to resync! FAAD: error: Quantised value out of range, trying to resync! FAAD: error: Quantised value out of range, trying to resync! FAAD: error: Channel coupling not yet implemented, trying to resync! FAAD: error: Gain control not yet implemented, trying to resync! FAAD: error: Invalid number of channels, trying to resync! FAAD: error: Maximum number of scalefactor bands exceeded, trying to resync! FAAD: error: Maximum number of scalefactor bands exceeded, trying to resync! FAAD: error: Gain control not yet implemented, trying to resync! FAAD: Failed to decode frame: Gain control not yet implemented VDec: vo config request - 720 x 576 (preferred colorspace: Planar YV12) VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is 1.82:1 - prescaling to correct movie aspect. VO: [xv] 720x576 => 1048x576 Planar YV12 [ASPECT] Warning: No suitable new res found! FAAD: error: Channel coupling not yet implemented, trying to resync! FAAD: error: Channel coupling not yet implemented, trying to resync! FAAD: error: Channel coupling not yet implemented, trying to resync! FAAD: error: Maximum number of scalefactor bands exceeded, trying to resync! FAAD: error: Gain control not yet implemented, trying to resync! FAAD: error: Maximum number of scalefactor bands exceeded, trying to resync! FAAD: error: Gain control not yet implemented, trying to resync! FAAD: error: Channel coupling not yet implemented, trying to resync! FAAD: error: Channel coupling not yet implemented, trying to resync! FAAD: error: Unexpected fill element with SBR data, trying to resync! FAAD: Failed to decode frame: Unexpected fill element with SBR data [h264 @ 0x88d3070]B picture before any references, skipping [h264 @ 0x88d3070]decode_slice_header error [h264 @ 0x88d3070]no frame! Error while decoding frame! FAAD: error: Maximum number of scalefactor bands exceeded, trying to resync! FAAD: error: Maximum number of scalefactor bands exceeded, trying to resync! FAAD: error: Gain control not yet implemented, trying to resync! FAAD: error: Invalid number of channels, trying to resync! FAAD: error: Channel coupling not yet implemented, trying to resync! FAAD: error: Invalid number of channels, trying to resync! FAAD: error: Channel coupling not yet implemented, trying to resync! FAAD: error: Scalefactor out of range, trying to resync! FAAD: error: Pulse coding not allowed in short blocks, trying to resync! FAAD: error: Gain control not yet implemented, trying to resync! FAAD: Failed to decode frame: Gain control not yet implemented [h264 @ 0x88d3070]B picture before any references, skipping [h264 @ 0x88d3070]decode_slice_header error [h264 @ 0x88d3070]no frame! Error while decoding frame! FAAD: error: Invalid number of channels, trying to resync! ??,?% 0 0 FAAD: error: Invalid number of channels, trying to resync! FAAD: error: Invalid number of channels, trying to resync! FAAD: error: Channel coupling not yet implemented, trying to resync! FAAD: error: Maximum number of scalefactor bands exceeded, trying to resync! FAAD: error: Invalid number of channels, trying to resync! FAAD: error: Invalid number of channels, trying to resync! FAAD: error: Channel coupling not yet implemented, trying to resync! FAAD: error: Channel coupling not yet implemented, trying to resync! FAAD: error: Maximum number of scalefactor bands exceeded, trying to resync! FAAD: Failed to decode frame: Maximum number of scalefactor bands exceeded [h264 @ 0x88d3070]B picture before any references, skipping [h264 @ 0x88d3070]decode_slice_header error [h264 @ 0x88d3070]no frame! Error while decoding frame! FAAD: error: Channel coupling not yet implemented, trying to resync! FAAD: error: Maximum number of scalefactor bands exceeded, trying to resync! FAAD: error: Gain control not yet implemented, trying to resync! FAAD: error: Maximum number of scalefactor bands exceeded, trying to resync! FAAD: error: Invalid number of channels, trying to resync! FAAD: error: Gain control not yet implemented, trying to resync! FAAD: error: Channel coupling not yet implemented, trying to resync! FAAD: error: Maximum number of scalefactor bands exceeded, trying to resync! FAAD: error: Invalid number of channels, trying to resync! FAAD: error: Invalid number of channels, trying to resync! FAAD: Failed to decode frame: Invalid number of channels [h264 @ 0x88d3070]B picture before any references, skipping [h264 @ 0x88d3070]decode_slice_header error [h264 @ 0x88d3070]no frame! Error while decoding frame! FAAD: error: Maximum number of scalefactor bands exceeded, trying to resync! FAAD: error: Quantised value out of range, trying to resync! MPlayer interrupted by signal 11 in module: decode_audio - MPlayer crashed by bad usage of CPU/FPU/RAM. Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and disassembly. Details in DOCS/HTML/en/bugreports_what.html#bugreports_crash. - MPlayer crashed. This shouldn't happen. It can be a bug in the MPlayer code _or_ in your drivers _or_ in your gcc version. If you think it's MPlayer's fault, please read DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and won't help unless you provide this information when reporting a possible bug.

3 5

[PATCH]Disable liba52 and libmp3 for icc
by Carl Eugen Hoyos 05 Oct '08

05 Oct '08

Hi! Currently, icc can't compile the internal libraries liba52 and libmp3 (with optimizations). Attached patch changes the default for both libraries from "enabled" to "autodetect" and disables the comilation for intel compilers. Ok to apply? Carl Eugen

5 5

[RFC] Makefile copyrights
by Diego Biurrun 18 Aug '08

18 Aug '08

I'd like to commit the attached patch and mark the Makefile as copyrighted by me. Not a single (non-empty) line written by Arpi or LGB remains in it, nor does any of the original structure. Nonetheless I can see a world of hurt coming down the pipe if I commit this directly, thus the RFC. Diego

5 35

ARM and liba52
by Siarhei Siamashka 18 Aug '08

18 Aug '08

Hi, Currently liba52 is broken for ARM processors which require strict alignment for accessing memory (ARM9, XScale, ...). AC3 audio playback just produces noise. Interestingly enough, the problem was introduced in 2003 (SVN revision 10314), and it was supposedly a fix for ARM: http://lists.mplayerhq.hu/pipermail/mplayer-dev-eng/2003-June/019377.html I wonder if it was a fix that turned compilation error into runtime failure ;) Anyway, it should be mentioned that modern ARM cores (such as ARM11) support unaligned memory access natively. Older cores can emulate unaligned memory accesses by handling alignment faults in the kernel, but this is very slow. PS. liba52 uses floating point math which is very slow on old ARM cores without hardware FPU, so using liba52 on such old cores is not very practical anyway. -- Best regards, Siarhei Siamashka

4 6

[PATCH] Fix for ARM compilation failure when IWMMXT support is disabled
by Siarhei Siamashka 02 Aug '08

02 Aug '08

Hi, Patch attached. -- Best regards, Siarhei Siamashka

2 7

[PATCH] compute correct length for theora videos
by Julian Kniephoff 27 Jul '08

27 Jul '08

Hello, this is a patch to let mplayer compute the correct duration of a theora video when libtheora support is compiled in (especially when running in "-identify mode"). To not repeat myself I'll just post links to the important posts of the bug report in the mplayer-users list. The baisc concept of the patch is also explained there: http://lists.mplayerhq.hu/pipermail/mplayer-users/2007-December/070943.html http://lists.mplayerhq.hu/pipermail/mplayer-users/2008-May/072933.html If this doesn't suffice, please ask for further clarification. The patch is written against the current SVN version (Revision 26728 according to "svn update", "mplayer" identifies itself as "MPlayer 1.0rc2-4.2.3") and tested on my system (Kernel 2.6.24.16, 32 bit linux but running on a 64 bit amd cpu; libtheora is version 1.0~beta2-2 from the Ubuntu repositories, if this is important). Thanks in advance, Julian.

5 11

[PATCH] mkv chapters and linked segments
by Fredrik Nilsson 21 Jul '08

21 Jul '08

Hi. This is a patch that loads mkv chapters from external files. It does this by loading the extra files into separate tracks and switches to them when the chapter changes. Changes in mplayer.c and demuxer.c makes mplayer switch chapters automatically at end of chapter. To switch tracks I use a function in mplayer.c to reset decoders, an ugly hack but I see no simple solution to this. I have looked into using libavformat but I see no way of implementing chapters or decoder change without changing the libavformat interface. Thoughts? Fredrik

6 10

[PATCH] fix v4l2 free_demuxer crash - uvcvideo
by Ötvös Attila 30 Jun '08

30 Jun '08

Hi All! This patch fix v4l2 free_demuxer crash to uvcvideo usb video driver. Best regards. Attila

3 7