May 2003 - MPlayer-dev-eng - lists.mplayerhq.hu

[PATCH] xml docs fix and mpst:// docs
by Alban Bedel 14 Jul '04

14 Jul '04

Hi, I wrote a little doc for the mpst:// stuff. I also fixed the tv examples and found a little mistake in the edl docs. The mpst docs are not in the patch as i don't have DocBook installed so i can't chacek that everything is ok. Albeu

9 23

[PATCH] New filter vf_ivtc, smart dropping of every 5th frame
by Johannes Guenther 12 Dec '03

12 Dec '03

Hi, after using mencoder for awhile I came across movies with (real) 29.97 fps which were created from a 24 fps source by inserting a duplicate frame after every 4th frame. When (re)encoding these movies it would be clever to drop these duplicated frames to save bandwidth and to eliminate the jerky motion artefacts. But to only use the option '-ofps 23.976' is not satisfactory because mencoder bluntly drops every 5th frame regardless of being duplicates or not; or missed I something? So I wrote a filter which does the job - other programs like transcode or VirtualDup already have one. There have also been requests concerning this issue: http://mplayerhq.hu/pipermail/mplayer-users/2002-September/020628.html http://mplayerhq.hu/pipermail/mplayer-dev-eng/2002-January/004502.html Some implementation details; how I see this problem; things I would like to discuss: - To detect the duplicated frames it is necessary to buffer at least 6 frames (you cannot display/encode the frames and decide afterwards 'Oh, I wanted to skip that frame'). But buffering (at least of this amount) is not supported by the vf-API (am I right?). So I had to expand it by introducing a new image-type MP_IMGTYPE_BUF. - Unfortunately I have to memcpy the whole frame to the buffer. It would be better to store only the meta-data/image-structure but this did not work (the information was lost during two calls of 'put_image'). - You need to also specify the '-mc 0' and '-noskip' option to mencoder otherwise mencoder complains about missing the first frames (which are gone to the buffer and were not yet displayed) and tries to insert frames. - 'put_image' is not noticed whether this is the last time it is called, but it needs to flush the buffer then, otherwise the last frames are lost. This cannot be done in 'uninit' because then everything is already over (files closed, image-structures invalid). The hack is to provide the total frame number as a hint to vf_ivtc via commandline, thus 'put_image' knows when it is its last time. - All in all it seems that the libMPcodecs API does not like buffering and skipping frames that much, it is not designed to provide such things, is it? For example a return code of 0 or -1 to indicate that a frames was skipped. (At least this information is not passed to mencoder) - Is a filter really the right way? Maybe it is better to provide this functionality directly by mencoder/mplayer. I'm not so intimate with the API details so it is likely that there are more elegant solutions. Despite all the problems and hacks the filter works here quite well and produces the correct result even if there is a change in the pattern of duplicated frames (counted as 'resyncs'). So, what so you think? Bye, Johannes -- http://beam.to/Hawk PGP Key fingerprint = 2F 72 52 1C CF 86 96 35 8A DD 8E F5 C6 05 CE C5

8 13

Translation fixes
by Nicolás Lichtmaier 30 Oct '03

30 Oct '03

As I told you all earlier, I've made a script to create .po files from the help files. By doing this I discovered some flaws in the translation files. This is the diff. I'm also attaching the new version of my tiny script. Index: help_mp-cz.h =================================================================== RCS file: /cvsroot/mplayer/main/help/help_mp-cz.h,v retrieving revision 1.28 diff -u -r1.28 help_mp-cz.h --- help_mp-cz.h 31 Oct 2002 11:01:40 -0000 1.28 +++ help_mp-cz.h 20 Nov 2002 18:10:20 -0000 @@ -228,7 +228,7 @@ #define MSGTR_OpeningAudioDemuxerFailed "Nepovedlo se otevøít audio demuxer: %s\n" #define MSGTR_OpeningSubtitlesDemuxerFailed "Nepovedlo se otevøít demuxer pro titulky: %s\n" #define MSGTR_TVInputNotSeekable "TV vstup neumoŸòuje posun (seek)! (Pravdìpodobnì \"posun\" bude pouŸit pro zmìnu kanálù ;)\n" -#define MSGTR_DemuxerInfoAlreadyPresent "Informace o demuxeru %s jiŸ pøítomno\n!" +#define MSGTR_DemuxerInfoAlreadyPresent "Informace o demuxeru %s jiŸ pøítomno!\n" #define MSGTR_ClipInfo "Informace o klipu: \n" // dec_video.c & dec_audio.c: Index: help_mp-de.h =================================================================== RCS file: /cvsroot/mplayer/main/help/help_mp-de.h,v retrieving revision 1.57 diff -u -r1.57 help_mp-de.h --- help_mp-de.h 11 Nov 2002 19:42:22 -0000 1.57 +++ help_mp-de.h 20 Nov 2002 18:10:23 -0000 @@ -224,7 +224,7 @@ #define MSGTR_OpeningAudioDemuxerFailed "Öffnen des Audiodemuxers fehlgeschlagen: %s\n" #define MSGTR_OpeningSubtitlesDemuxerFailed "Öffnen des Untertiteldemuxers fehlgeschlagen: %s\n" #define MSGTR_TVInputNotSeekable "TV-Input ist nicht durchsuchbar! (möglicherweise änderst du damit den Kanal ;)\n" -#define MSGTR_DemuxerInfoAlreadyPresent "Demuxerinfo %s existiert bereits\n!" +#define MSGTR_DemuxerInfoAlreadyPresent "Demuxerinfo %s existiert bereits!\n" #define MSGTR_ClipInfo "Clipinfo: \n" // dec_video.c & dec_audio.c: Index: help_mp-dk.h =================================================================== RCS file: /cvsroot/mplayer/main/help/help_mp-dk.h,v retrieving revision 1.16 diff -u -r1.16 help_mp-dk.h --- help_mp-dk.h 19 Oct 2002 20:26:04 -0000 1.16 +++ help_mp-dk.h 20 Nov 2002 18:10:25 -0000 @@ -216,7 +216,7 @@ #define MSGTR_OpeningAudioDemuxerFailed "Kan ikke åbne lyddemuxer: %s\n" #define MSGTR_OpeningSubtitlesDemuxerFailed "Kunne ikke åbne undertekstdemuxer: %s\n" #define MSGTR_TVInputNotSeekable "TV input er ikke søgebart! (kan være du skulle skifte kanal ;))\n" -#define MSGTR_DemuxerInfoAlreadyPresent "Demuxer info %s allerede tilstede\n!" +#define MSGTR_DemuxerInfoAlreadyPresent "Demuxer info %s allerede tilstede!\n" #define MSGTR_ClipInfo "Klip info: \n" // dec_video.c & dec_audio.c: Index: help_mp-fr.h =================================================================== RCS file: /cvsroot/mplayer/main/help/help_mp-fr.h,v retrieving revision 1.23 diff -u -r1.23 help_mp-fr.h --- help_mp-fr.h 14 Nov 2002 12:19:31 -0000 1.23 +++ help_mp-fr.h 20 Nov 2002 18:10:30 -0000 @@ -186,7 +186,7 @@ #define MSGTR_TooManyAudioInBuffer "\nDEMUXER: Trop (%d dans %d octets) de packets audio dans le tampon!\n" #define MSGTR_TooManyVideoInBuffer "\nDEMUXER: Trop (%d dans %d octets) de packets vidéo dans le tampon!\n" #define MSGTR_MaybeNI "Peut-être jouez-vous un flux/fichier mal multiplexé, ou le codec n'est pas là...\n"\ - "Pour les fichier .AVI, essayez l'option -ni." + "Pour les fichier .AVI, essayez l'option -ni.\n" #define MSGTR_SwitchToNi "\nFichier .AVI mal multiplexé - passage en mode -ni!\n" #define MSGTR_Detected_XXX_FileFormat "Fichier de type %s détecté!\n" #define MSGTR_DetectedAudiofile "Fichier audio détecté!\n" Index: help_mp-gr.h =================================================================== RCS file: /cvsroot/mplayer/main/help/help_mp-gr.h,v retrieving revision 1.6 diff -u -r1.6 help_mp-gr.h --- help_mp-gr.h 27 Oct 2002 10:43:38 -0000 1.6 +++ help_mp-gr.h 20 Nov 2002 18:10:30 -0000 @@ -228,7 +228,7 @@ #define MSGTR_OpeningAudioDemuxerFailed "Áðïôõ÷ßá êáôÜ ôï Üíïéãìá ôïõ demuxer Þ÷ïõ: %s\n" #define MSGTR_OpeningSubtitlesDemuxerFailed "Áðïôõ÷ßá êáôÜ ôï Üíïéãìá ôïõ demuxer demuxer õðïôßôëùí: %s\n" #define MSGTR_TVInputNotSeekable "TV input äåí åßíáé áíáæçôÞóéìï! (ðéèáíüí ç áíáæÞôçóç íá ãßíåé ãéá ôçí áëëáãÞ óôáèìþí ;)\n" -#define MSGTR_DemuxerInfoAlreadyPresent "Ïé ðëçñïöïñßåò ãéá ôï demuxer %s õðÜñ÷ïõí Þäç\n!" +#define MSGTR_DemuxerInfoAlreadyPresent "Ïé ðëçñïöïñßåò ãéá ôï demuxer %s õðÜñ÷ïõí Þäç!\n" #define MSGTR_ClipInfo "Ðëçñïöïñßåò ôïõ ìÝóïõ: \n" // dec_video.c & dec_audio.c: Index: help_mp-nl.h =================================================================== RCS file: /cvsroot/mplayer/main/help/help_mp-nl.h,v retrieving revision 1.20 diff -u -r1.20 help_mp-nl.h --- help_mp-nl.h 19 Oct 2002 20:26:04 -0000 1.20 +++ help_mp-nl.h 20 Nov 2002 18:10:35 -0000 @@ -216,7 +216,7 @@ #define MSGTR_OpeningAudioDemuxerFailed "Kan audio demuxer niet openen: %s\n" #define MSGTR_OpeningSubtitlesDemuxerFailed "Openen van de ondertiteling demuxer is mislukt: %s\n" #define MSGTR_TVInputNotSeekable "TV invoer is niet doorzoekbaar! (Waarschijnlijk zal zoeken de kanalen veranderen ;)\n" -#define MSGTR_DemuxerInfoAlreadyPresent "Demuxer info %s reeds aanwezig\n!" +#define MSGTR_DemuxerInfoAlreadyPresent "Demuxer info %s reeds aanwezig!\n" #define MSGTR_ClipInfo "Clip info: \n" // dec_video.c & dec_audio.c: Index: help_mp-pt_BR.h =================================================================== RCS file: /cvsroot/mplayer/main/help/help_mp-pt_BR.h,v retrieving revision 1.6 diff -u -r1.6 help_mp-pt_BR.h --- help_mp-pt_BR.h 19 Oct 2002 20:26:04 -0000 1.6 +++ help_mp-pt_BR.h 20 Nov 2002 18:10:37 -0000 @@ -176,7 +176,7 @@ #define MSGTR_MpegNoSequHdr "MPEG: FATAL: EOF enquanto procurava pela sequência de cabeçalho\n" #define MSGTR_CannotReadMpegSequHdr "FATAL: Impossível ler a sequência do cabeçalho!\n" -#define MSGTR_CannotReadMpegSequHdrEx "FATAL: Impossível ler a extensão da sequência de cabeçalhon" +#define MSGTR_CannotReadMpegSequHdrEx "FATAL: Impossível ler a extensão da sequência de cabeçalho\n" #define MSGTR_BadMpegSequHdr "MPEG: Sequência de cabeçalho ruim!\n" #define MSGTR_BadMpegSequHdrEx "MPEG: Extenção da sequência de cabeçalho ruim!\n" Index: help_mp-sk.h =================================================================== RCS file: /cvsroot/mplayer/main/help/help_mp-sk.h,v retrieving revision 1.8 diff -u -r1.8 help_mp-sk.h --- help_mp-sk.h 19 Oct 2002 20:26:04 -0000 1.8 +++ help_mp-sk.h 20 Nov 2002 18:10:40 -0000 @@ -217,7 +217,7 @@ #define MSGTR_OpeningAudioDemuxerFailed "NemôŸem otvori» audio demuxer: %s\n" #define MSGTR_OpeningSubtitlesDemuxerFailed "NemôŸem otvori» demuxer titulkov: %s\n" #define MSGTR_TVInputNotSeekable "v TV vstupe nie je moŸné sa pohybova»! (moŸno posun bude na zmenu kanálov ;)\n" -#define MSGTR_DemuxerInfoAlreadyPresent "Demuxer info %s uŸ prítomné\n!" +#define MSGTR_DemuxerInfoAlreadyPresent "Demuxer info %s uŸ prítomné!\n" #define MSGTR_ClipInfo "Clip info: \n" // dec_video.c & dec_audio.c: Index: help_mp-zh.h =================================================================== RCS file: /cvsroot/mplayer/main/help/help_mp-zh.h,v retrieving revision 1.11 diff -u -r1.11 help_mp-zh.h --- help_mp-zh.h 17 Nov 2002 12:31:02 -0000 1.11 +++ help_mp-zh.h 20 Nov 2002 18:10:42 -0000 @@ -62,8 +62,8 @@ #define MSGTR_NoHomeDir "ÕÒ²»µœHOMEÄ¿ÂŒ\n" #define MSGTR_GetpathProblem "get_path(\"config\")ÎÊÌâ\n" #define MSGTR_CreatingCfgFile "ŽŽœšconfigÎÄŒþ: %s\n" -#define MSGTR_InvalidVOdriver "ÎÞÐ§µÄÊÓÆµÊä³öÇý¶¯: %s\nÓÃ'-vo help' t²é¿Ž¿ÉÓÃµÄÊÓÆµÇý¶¯µÄÁÐ±í" -#define MSGTR_InvalidAOdriver "ÎÞÐ§µÄÊÓÆµÊä³öÇý¶¯: %s\nÓÃ'-vo help' t²é¿Ž¿ÉÓÃµÄÊÓÆµÇý¶¯µÄÁÐ±í" +#define MSGTR_InvalidVOdriver "ÎÞÐ§µÄÊÓÆµÊä³öÇý¶¯: %s\nÓÃ'-vo help' t²é¿Ž¿ÉÓÃµÄÊÓÆµÇý¶¯µÄÁÐ±í\n" +#define MSGTR_InvalidAOdriver "ÎÞÐ§µÄÊÓÆµÊä³öÇý¶¯: %s\nÓÃ'-vo help' t²é¿Ž¿ÉÓÃµÄÊÓÆµÇý¶¯µÄÁÐ±í\n" #define MSGTR_CopyCodecsConf "(°Ñetc/codecs.conf(ŽÓMPlayerµÄÔŽÂëÊ÷ÖÐ)žŽÖÆ/ÁŽœÓ ~/.mplayer/codecs.conf)\n" #define MSGTR_CantLoadFont "ÎÞ·šŒÓÔØ×ÖÌå: %s\n" #define MSGTR_CantLoadSub "ÎÞ·šŒÓÔØ×ÖÄ»: %s\n" @@ -222,7 +222,7 @@ #define MSGTR_OpeningAudioDemuxerFailed "Žò¿ªÒôÆµdemuxer: %sÊ§°Ü\n" #define MSGTR_OpeningSubtitlesDemuxerFailed "Žò¿ª×ÖÄ»demuxer: %sÊ§°Ü\n" #define MSGTR_TVInputNotSeekable "TVÊäÈë²»ÄÜËÑË÷! (¿ÉÄÜËÑË÷ÓŠžÃÓÃÀŽžü»»ÆµµÀ;)\n" -#define MSGTR_DemuxerInfoAlreadyPresent "Demuxer info %s ÒÑŸÏÔÊŸ\n!" +#define MSGTR_DemuxerInfoAlreadyPresent "Demuxer info %s ÒÑŸÏÔÊŸ!\n" #define MSGTR_ClipInfo "Clip info: \n" // dec_video.c & dec_audio.c: #! /bin/bash set -e process() { cpp -dD $1 | sed -ne 's/" *"//g' -e "s/\\\'/\'/g" -e 's/#define $[^ ]*$ $.*$/\1 \2/p' | sort } eng=help_mp-en.h process $eng > engmessages for f in help_mp*h ; do if [ $f = $eng ]; then continue fi l=$(echo $f | sed -ne 's/help_mp-$.*$\.h/\1/p' ) echo processing $l ... join engmessages <(process $f) | sed -ne 's/$[^ ]*$ $".*"$ $".*"$$/msgid \2\ msgstr \3\ /p' > $l.po msgfmt -o "$l.mo" "$l.po" || true done echo creating pot ... sed -ne 's/$[^ ]*$ $".*"$$/msgid \2\ msgstr ""\ /p' < engmessages > mplayer.pot

2 1

next-audio/video-track patch
by Rüdiger Kuhlmann 29 Oct '03

29 Oct '03

Attached the current next-audio/video-track patch, updated to current mplayer. Thanks for ignoring it for months. It also fixes a segfault and the unability to package. -- 100 DM = 51 € 13 ¢. 100 € = 195 DM 58 pf. mailto:ruediger@ruediger-kuhlmann.de http://www.ruediger-kuhlmann.de/

4 3

[PATCH] Possible SDL aspect bug, quick workaround
by Fredrik Roubert 18 Oct '03

18 Oct '03

Hi! I've been experiencing some wierd behaviour when using -vo sdl:dga and today I finally spent some time to track down the problem. I'm not sure wheter this is an actual bug in MPlayer, or if I just don't understand how MPlayer is supposed to work well enough. However, this causes a lot (maybe most) of my files to be scaled when played in fullscreen mode (sdl:dga), which is a big performance penalty on the system I'm using. The attached short patch (only three changes in vo_sdl.c) will change the behaviour of MPlayer, so that aspect calculations are only carried out when using SDL if -zoom is also specified on the command line. (I don't think that this will break anything.) Even if there is no bug in the aspect calculating code, this is a useful feature for us who have systems that are slow on scaling movies. Now, to the thing I find strange: mplayer -vo sdl:dga -v aliens.avi >& debug MPlayer dev-CVS-030520-17:25-3.2.3 (C) 2000-2003 Arpad Gereoffy (see DOCS) [ffmpeg] aspect_ratio: 0.000000 VDec: vo config request - 720 x 480 (preferred csp: Planar YV12) Trying filter chain: vo VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is undefined - no prescaling applied. VO Config (720x480->720x480,flags=0,'MPlayer',0x32315659) VO: [sdl] 720x480 => 720x480 Planar YV12 VO: Description: SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!) VO: Author: Ryan C. Gordon <icculus(a)lokigames.com>, Felix Buenemann <atmosfear(a)users.sourceforge.net> aspect: Warning: no suitable new res found! SDL: Using 0x32315659 (Planar YV12) image format aspect_save_orig 720x480 aspect_save_prescale 720x480 SDL: using hardware-surface aspect_save_screenres 1024x768 aspect(0) fitin: 1024x768 zoom: 0 screenaspect: 1.33 aspect(1) wh: 720x480 (org: 720x480) aspect(2) wh: 720x480 (org: 720x480) aspect(3) wh: 720x480 (org: 720x480) SDL: setting zoomed fullscreen with modeswitching SDL Mode: 0: 1024 x 768 SDL Mode: 1: 800 x 600 SDL Mode: 2: 768 x 576 SDL Mode: 3: 720 x 576 SDL Mode: 4: 720 x 480 SDL Mode: 5: 640 x 480 SDL Mode: 6: 584 x 438 SDL Mode: 7: 400 x 300 SDL Mode: 8: 352 x 288 SDL Mode: 9: 352 x 240 SDL Mode: 10: 320 x 240 SET SDL Mode: 4: 720 x 480 aspect_save_screenres 720x480 aspect(0) fitin: 720x480 zoom: 1 screenaspect: 1.33 aspect(1) wh: 720x480 (org: 720x480) aspect(2) wh: 720x426 (org: 720x480) aspect(3) wh: 720x426 (org: 720x480) *** [vo] Allocating (slices) mp_image_t, 720x480x12bpp YUV planar, 518400 bytes *** [vo] Allocating (slices) mp_image_t, 720x480x12bpp YUV planar, 518400 bytes The movie has a resolution of 720x480 and I would expect MPlayer to play it in a 720x480 video mode directly, without scaling. Instead, the movie is scaled to 720x426 (which makes it ugly and very slow on my system). Cheers // Fredrik Roubert -- Möllevångsvägen 6c | +46 46 188127 SE-222 40 Lund | http://www.df.lth.se/~roubert/ --- main.org/libvo/vo_sdl.c Wed Apr 9 19:05:35 2003 +++ main/libvo/vo_sdl.c Tue May 20 22:36:38 2003 @@ -124,7 +124,7 @@ #include "../input/input.h" #include "../input/mouse.h" -extern int verbose; +extern int verbose, softzoom; int sdl_noxv; int sdl_forcexv; @@ -727,7 +727,8 @@ if(priv->fulltype&FS) aspect_save_screenres(priv->XWidth, priv->XHeight); - aspect(&priv->dstwidth, &priv->dstheight, A_ZOOM); + if(softzoom) + aspect(&priv->dstwidth, &priv->dstheight, A_ZOOM); } /* try to change to given fullscreenmode */

6 14

[PATCH] README
by Diego Biurrun 17 Oct '03

17 Oct '03

Hello everybody! Hoping to bring the linewrap saga to a good end, here is my latest patch for the README. Lines are wrapped on column 80, meaning there are at most 79 characters of text on one line. The changes: - Added Step0: Getting MPlayer Download instructions are consolidated in one place instead of repeated at 3 different places throughout the text. Plus I included instructions for accessing CVS. - I mention the ~/.mplayer/Skin/ and ~/.mplayer/font/ installation locations for normal users. - A bunch of wording updates. Diego --- README Sat Jun 29 14:01:35 2002 +++ README-diego Sat Jun 29 15:51:40 2002 @@ -4,69 +4,105 @@ MPlayer currently works best from the command line, but there is a GUI with skin support in the alpha development stage. -This document is for getting you started in a few minutes. It cannot answer -all of your questions. If you have problems, please read the documentation in -DOCS/documentation.html. It is extensive and should answer most of your -questions. Also read the manpage to learn how to use MPlayer. +This document is for getting you started in a few minutes. It cannot answer all +of your questions. If you have problems, please read the documentation in +DOCS/documentation.html. It is extensive and should answer most of your +questions. Also read the man page to learn how to use MPlayer. + + +Requirements: +- To compile MPlayer with X11 support, you need to have the XFree86 development + packages installed. +- For the GUI you need the GTK development packages. -To compile MPlayer with X11 support, you need to have the XFree86 development -packages installed, for the GUI you also need the GTK development packages. Before you start... Unless you know what are you doing, consult DOCS/video.html to see which driver -to use with your video card to get the best video quality and performance. -Most cards require special drivers not included with standard X11, to drive -the 2-D video acceleration features (YUV, scaling etc) of your card! +to use with your video card to get the best quality and video performance. Most +cards require special drivers not included with standard X11 to drive their 2-D +video acceleration features like YUV and scaling. A quick and incomplete list of recommendations: -- ATI cards: get the GATOS drivers for X11/Xv or use vidix -- Matrox G200/G4x0/G550: compile and use mga_vid for Linux, use vidix for BSD -- 3dfx Voodoo3/Banshee: get XFree86 4.2.0+ for Xv or use the tdfxfb driver -- nVidia cards: get the X11 driver from www.nvidia.com for Xv support -Without having accelerated video, even a 800MHz P3 may be slow to play DVD! +- ATI cards: Get the GATOS drivers for X11/Xv or use VIDIX. +- Matrox G200/G4x0/G550: Compile and use mga_vid for Linux, on BSD use VIDIX. +- 3dfx Voodoo3/Banshee: Get XFree86 4.2.0+ for XV or use the tdfxfb driver. +- nVidia cards: Get the X11 driver from www.nvidia.com for XV support. +- NeoMagic cards: Get an XV capable driver from our homepage as described in + DOCS/video.html + +Without accelerated video even an 800MHz P3 may be too slow to play DVDs. + + +______________________ +STEP0: Getting MPlayer +~~~~~~~~~~~~~~~~~~~~~~ + +Official releases, prereleases and CVS snapshots are available from the download +section of our homepage at + + http://www.mplayerhq.hu/homepage/dload.html + +You can also get fonts for the onscreen display (OSD), Win32 codecs and a number +of different skins for the GUI there. MPlayer does not come with any of these by +default, so if you want to have the OSD, the GUI or support for more video +formats, download these. + +MPlayer is also available via anonymous CVS. Issue the following commands to +get the latest sources: + + cvs -d:pserver:anonymous@mplayerhq.hu:/cvsroot/mplayer login + cvs -z3 -d:pserver:anonymous@mplayerhq.hu:/cvsroot/mplayer co main + +A directory named 'main' will be created. You can later update your sources with + + cvs -z3 update -dPA + +from within that directory. + ___________________________________ STEP1: Installing FFmpeg libavcodec ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -If you are using an official release, skip this step, since official releases -always include libavcodec. To verify this check if the libavcodec subdirectory -is empty or contains the sources! - The FFmpeg project provides libavcodec, a very portable MPEG4/DivX codec with -excellent speed and quality. It is the preferred codec of MPlayer for playing -mpeg4 and divx video. You have to get libavcodec directly from the FFmpeg CVS -server. Use the following commands in a suitable directory outside the MPlayer -source directory: +excellent speed and quality. It is the preferred MPEG4/DivX codec of MPlayer and +used to be included in the MPlayer CVS tree. This is no longer the case and you +have to get libavcodec directly from the FFmpeg CVS server. + +If you are using an official (pre)release, skip this step, since official +releases include libavcodec. CVS sources and CVS snapshots do not include +libavcodec. To verify if you do have libavcodec or not, check if the libavcodec +subdirectory in the MPlayer source tree is empty or not. + +To get the FFmpeg sources, use the following commands in a suitable directory +outside the MPlayer source directory: cvs -d:pserver:anonymous@cvs.ffmpeg.sourceforge.net:/cvsroot/ffmpeg login -cvs -z9 -d:pserver:anonymous@cvs.ffmpeg.sourceforge.net:/cvsroot/ffmpeg co ffmpeg/libavcodec +cvs -z3 -d:pserver:anonymous@cvs.ffmpeg.sourceforge.net:/cvsroot/ffmpeg co ffmpeg/libavcodec When asked for a password, you can just hit enter. -Now, replace the empty libavcodec directory with the FFmpeg libavcodec source -by removing the libavcodec subdirectory in the MPlayer source tree and then -copying (symbolic linking does not suffice!) the freshly downloaded FFmpeg -libavcodec directory back into the MPlayer source tree. +Now, replace the empty libavcodec directory in the MPlayer source tree with the +FFmpeg libavcodec source by removing the libavcodec subdirectory in the MPlayer +source tree and then copying (symbolic linking does not suffice) the freshly +downloaded FFmpeg libavcodec directory back into the MPlayer source tree. ______________________________ STEP2: Installing Win32 Codecs ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -While MPlayer and libavcodec has built-in support for the most common audio -and video formats, some others are playable only with the Win32 DLLs -or the XAnim binary plugins. Few examples: WMV video, Divx/WMA audio, Indeo. -This step is not mandatory, but recommended for getting MPlayer to play more -different file types! - -Grab the win32 codecs package from the download page +MPlayer and libavcodec have builtin support for the most common audio and video +formats, but some others are playable only with the Win32 DLLs or the XAnim +binary plugins. Examples include WMV video, DivX with WMA audio (not normal DivX +files) and Indeo. This step is not mandatory, but recommended for getting +MPlayer to play more different file types. + +Unpack the codecs archive and put the contents in a directory where MPlayer will +find them. The default directory is /usr/lib/win32/ but you can change that to +something else by using the '--with-win32libdir=DIR' option when you run +'./configure'. - http://www.mplayerhq.hu/homepage/dload.html - -unpack it and put the contents in a directory where MPlayer will find them. -The default directory is /usr/lib/win32/ but you can change that to something -else by using the '--with-win32libdir=DIR' option when you run './configure' . __________________________ STEP3: Configuring MPlayer @@ -76,9 +112,8 @@ ./configure -to configure MPlayer with the default options. The options you installed above -should be autodetected, except GUI support, which has to be enabled separately, -run +to configure MPlayer with the default options. The codecs you installed above +should be autodetected. GUI support has to be enabled separately, run ./configure --enable-gui @@ -95,6 +130,7 @@ the file configure.log for errors and reasons for the failure. Repeat this step until you are satisfied with the enabled feature set. + ________________________ STEP4: Compiling MPlayer ~~~~~~~~~~~~~~~~~~~~~~~~ @@ -109,77 +145,78 @@ provided that you have write permission in the installation directory. -If all went well, you can run MPlayer by typing 'mplayer' -You should get a summary of the most common options and keys (help screen). +If all went well, you can run MPlayer by typing 'mplayer'. A help screen with a +summary of the most common options and keyboard shortcuts should be displayed. -If you get 'unable to load shared library' or similar errors, then run +If you get 'unable to load shared library' or similar errors, run 'ldd ./mplayer' to check which libraries fail and go back to STEP 3 to fix it. -Sometimes just running 'ldconfig' is enough. +Sometimes running 'ldconfig' is enough to fix the problem. NOTE: If you run Debian you can configure, compile and build a proper deb package with only one command: fakeroot debian/rules binary + ____________________________________________ STEP5: Installing the onscreen display fonts ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -To enable OSD (onscreen status display) and ASCII/TEXT subtitles you need some -fonts. Get them from our homepage: +To enable onscreen status display and ASCII subtitles you need some fonts. -http://www.mplayerhq.hu/homepage/dload.html +Unpack the archive and choose one of the available font sizes. Then copy the +font files of the corresponding size into /usr/local/share/mplayer/font/ or +~/.mplayer/font/ (or whatever you set with './configure --datadir=DIR'). -Unpack the archive and choose one of the available font sizes. Then copy the -font files of the corresponding size into /usr/local/share/mplayer/font/ -(or whatever you set with './configure --datadir=DIR'). ____________________________ STEP6: Installing a GUI skin ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Please remember that the GUI is still in the alpha development stage and not -completely finished yet. Features like playlist, preferences and equalizer -do not work at all. Expect them for the 1.0 release -Basic stuff like file selection and seeking works, though. - -If you want to use the GUI you need to download a skin, since MPlayer does not -come with a skin by default. Choose one from the download page +completely finished yet. Features like playlist and preferences do not work at +all. Expect them for the 1.0 release. Basic stuff like file selection and +seeking works, though. + +Unpack the archive and put the contents in /usr/local/share/mplayer/Skin/ or +~/.mplayer/Skin/. MPlayer will use the skin in the default/ subdirectory of +/usr/local/share/mplayer/Skin/ or ~/.mplayer/Skin/ unless told otherwise via the +'-skin' switch. You should therefore rename your skin subdirectory or make a +suitable symbolic link. - http://www.mplayerhq.hu/homepage/dload.html - -unpack it in /usr/local/share/mplayer/Skin/. MPlayer will use the skin in -the default/ subdirectory (/usr/local/share/mplayer/Skin/default/*) unless -told otherwise via the '-skin' switch. You should therefore rename your -skin subdirectory, make a suitable symbolic link or set the skin name in -the file mplayer.conf by 'skin=skinname'. __________________ STEP7: Let's play! ~~~~~~~~~~~~~~~~~~ -That's it for the moment. To start playing movies, open a command line and try +That's it for the moment. To start playing movies, open a command line and try mplayer <moviefile> -or for the GUI: +or for the GUI + mplayer -gui <moviefile> gmplayer <moviefile> - (just 'gmplayer' is enough to use the GUI fileselector) + +gmplayer is a symbolic link to mplayer created by 'make install'. +Without <moviefile>, MPlayer will come up and you will be able to use the GUI +filepicker. To play VCD track or DVD title, try: mplayer -vcd 2 -cdrom-device /dev/hdc mplayer -dvd 1 -alang en -slang hu -dvd-device /dev/hdd -See 'mplayer -help' and 'man mplayer' for further options. +See 'mplayer --help' and 'man mplayer' for further options. 'mplayer -vo help' will show you the available video output drivers. Experiment -with the '-vo' switch to see which one gives you the best performance! -If you get very jerky playback or no sound, experiment with -ao (see -ao help) -Note that jerky playback is caused by buggy audio drivers or too slow cpu/vga. -With a good audio and video driver combination, one can play DVDs and 720x576 -DivX files smoothly on a Celeron 366. For slower systems, you need -framedrop. +with the '-vo' switch to see which one gives you the best performance. +If you get jerky playback or no sound, experiment with the '-ao' switch (see +'-ao help') to choose between different audio drivers. Note that jerky playback +is caused by buggy audio drivers or a slow processor and video card. With a good +audio and video driver combination, one can play DVDs and 720x576 DivX files +smoothly on a Celeron 366. Slower systems may need the '-framedrop' option. Questions you may have are probably answered in the rest of the documentation. -The place to start reading is DOCS/faq.html and DOCS/documentation.html. +The places to start reading are the man page, DOCS/documentation.html and +DOCS/faq.html.

2 3

lavc 2 pass mode patch
by Johannes E. Schindelin 11 Sep '03

11 Sep '03

Hi, I noticed a problem where an mpeg2 stream triggered twice a "vo config". In this case, the stats_file is opened twice for writing. The first config happens at the start of the mpeg2 stream, the second at the end. The effect: The stats_file is opened for the first time. A lot of lines are written. Then the file is opened a second time, a few lines are written at the start, the file is closed only once and filled with '\0'. The proposed patch just ignores the second attempt to open the stats_file. Ciao, Dscho

2 1

[PATCH] mga_vid.o: choose device with module parameter --> multihead video
by Hans-Andreas Engel 31 Aug '03

31 Aug '03

Hello. I would like to suggest adding the following patch to the cvs [requires the patch posted a few days ago, which adds the module parameter "major"]: This patch adds the module parameter "mga_number". On a system with multiple matrox cards or a matrox card with multiple chips, this parameters selects which matrox card/chip is used (in the order of found devices). Then, one can load the mga_vid module once for each card. Say, on a system with two cards, the /etc/modules.conf can look like: --- alias char-major-178 mga_vid alias char-major-179 mga_vid options char-major-179 -o mga_vid-1 major=179 mga_number=1 --- Note that the "-o" option loads a module under a different name. This allows loading the mga_vid module several times. With a mknod /dev/mga_vid0 c 178 0 mknod /dev/mga_vid1 c 179 0 one can then run mplayer on both cards at the same time: mplayer -slave -vo mga:/dev/mga_vid0 movie1.avi & mplayer -vo mga:/dev/mga_vid1 movie2.avi Please comment [arpi, attila, eyck, ...] (and commit?) this patch. Hansres --- drivers_new/mga_vid.c 2003-03-12 19:19:53.000000000 +0100 +++ drivers_multi_2/mga_vid.c 2003-03-17 09:09:18.000000000 +0100 @@ -270,6 +270,7 @@ static int mga_brightness = 0; // initial brightness static int mga_contrast = 0; // initial contrast +static int mga_number = 0; // which device/card is taken static int major = DEFAULT_MGA_VID_MAJOR; //static int mga_force_memsize = 0; @@ -278,6 +279,8 @@ MODULE_PARM(mga_top_reserved, "i"); MODULE_PARM(mga_brightness, "i"); MODULE_PARM(mga_contrast, "i"); +MODULE_PARM(mga_number, "i"); +MODULE_PARM_DESC(mga_number, "selects matrox device/card, 0=first, etc."); MODULE_PARM(major, "i"); static struct pci_dev *pci_dev; @@ -1310,31 +1313,47 @@ struct pci_dev *dev = NULL; unsigned int card_option; - if((dev = pci_find_device(PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G550, NULL))) + char *mga_dev_name; + int num_found = 0; + while((dev = pci_find_device(PCI_VENDOR_ID_MATROX, PCI_ANY_ID, dev))) { - is_g400 = 1; - printk(KERN_INFO "mga_vid: Found MGA G550\n"); - } - else if((dev = pci_find_device(PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400, NULL))) - { - is_g400 = 1; - printk(KERN_INFO "mga_vid: Found MGA G400/G450\n"); - } - else if((dev = pci_find_device(PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP, NULL))) - { - is_g400 = 0; - printk(KERN_INFO "mga_vid: Found MGA G200 AGP\n"); - } - else if((dev = pci_find_device(PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_PCI, NULL))) - { - is_g400 = 0; - printk(KERN_INFO "mga_vid: Found MGA G200 PCI\n"); + mga_dev_name = ""; + num_found++; + switch(dev->device) { + case PCI_DEVICE_ID_MATROX_G550: + is_g400 = 1; + mga_dev_name = "MGA G550"; + break; + case PCI_DEVICE_ID_MATROX_G400: + is_g400 = 1; + mga_dev_name = "MGA G400/G450"; + break; + case PCI_DEVICE_ID_MATROX_G200_AGP: + is_g400 = 0; + mga_dev_name = "MGA G200 AGP"; + break; + case PCI_DEVICE_ID_MATROX_G200_PCI: + is_g400 = 0; + mga_dev_name = "MGA G200"; + break; + default: + num_found--; + printk(KERN_INFO "mga_vid: ignoring matrox device (%d) at %s [%s]\n", dev->device, dev->slot_name, dev->name); + break; + } + if(num_found == mga_number+1) + break; } - else + + if(!dev) { - printk(KERN_ERR "mga_vid: No supported cards found\n"); + if(num_found==0) + printk(KERN_ERR "mga_vid: No supported cards found\n"); + else + printk(KERN_ERR "mga_vid: Only %d supported cards found\n", num_found); return FALSE; } + printk(KERN_INFO "mga_vid: Found %s at %s [%s]\n", mga_dev_name, dev->slot_name, dev->name); pci_dev = dev;

4 6

[PATCH] some support for NV12 and NV21 image format
by Angelo Cano 20 Aug '03

20 Aug '03

I have a tv card that outputs yuv420p using NV12 format, this patch enables NV12/NV21 -> YV12 conversion.

3 4

[PATCH] add a --with-dvbincdir option to configure
by Götz Waschk 17 Aug '03

17 Aug '03

Hi everyone, this patch adds a --with-dvbincdir to configure. This was motivated by a header conflict between DVB and dxr3, at least on Mandrake. Both have a header called linux/em8300.h. The solution is not to add the dvb includes to the dxr3 related files. That's why there's an extra rule for vo_mpegpes.o in libvo/Makefile. This should also apply on 0.90, but there you only need to modify configure and libvo/Makefile. CU -- What difference does it make to the dead, the orphans and the homeless, whether the mad destruction is wrought under the name of totalitarianism or the holy name of liberty or democracy? Mahatma Gandhi (1869 - 1948), "Non-Violence in Peace and War"

2 1