November 2002 - MPlayer-dev-eng - lists.mplayerhq.hu

Translation fixes
by Nicolás Lichtmaier 30 Oct '03

30 Oct '03

As I told you all earlier, I've made a script to create .po files from the help files. By doing this I discovered some flaws in the translation files. This is the diff. I'm also attaching the new version of my tiny script. Index: help_mp-cz.h =================================================================== RCS file: /cvsroot/mplayer/main/help/help_mp-cz.h,v retrieving revision 1.28 diff -u -r1.28 help_mp-cz.h --- help_mp-cz.h 31 Oct 2002 11:01:40 -0000 1.28 +++ help_mp-cz.h 20 Nov 2002 18:10:20 -0000 @@ -228,7 +228,7 @@ #define MSGTR_OpeningAudioDemuxerFailed "Nepovedlo se otevøít audio demuxer: %s\n" #define MSGTR_OpeningSubtitlesDemuxerFailed "Nepovedlo se otevøít demuxer pro titulky: %s\n" #define MSGTR_TVInputNotSeekable "TV vstup neumoŸòuje posun (seek)! (Pravdìpodobnì \"posun\" bude pouŸit pro zmìnu kanálù ;)\n" -#define MSGTR_DemuxerInfoAlreadyPresent "Informace o demuxeru %s jiŸ pøítomno\n!" +#define MSGTR_DemuxerInfoAlreadyPresent "Informace o demuxeru %s jiŸ pøítomno!\n" #define MSGTR_ClipInfo "Informace o klipu: \n" // dec_video.c & dec_audio.c: Index: help_mp-de.h =================================================================== RCS file: /cvsroot/mplayer/main/help/help_mp-de.h,v retrieving revision 1.57 diff -u -r1.57 help_mp-de.h --- help_mp-de.h 11 Nov 2002 19:42:22 -0000 1.57 +++ help_mp-de.h 20 Nov 2002 18:10:23 -0000 @@ -224,7 +224,7 @@ #define MSGTR_OpeningAudioDemuxerFailed "Öffnen des Audiodemuxers fehlgeschlagen: %s\n" #define MSGTR_OpeningSubtitlesDemuxerFailed "Öffnen des Untertiteldemuxers fehlgeschlagen: %s\n" #define MSGTR_TVInputNotSeekable "TV-Input ist nicht durchsuchbar! (möglicherweise änderst du damit den Kanal ;)\n" -#define MSGTR_DemuxerInfoAlreadyPresent "Demuxerinfo %s existiert bereits\n!" +#define MSGTR_DemuxerInfoAlreadyPresent "Demuxerinfo %s existiert bereits!\n" #define MSGTR_ClipInfo "Clipinfo: \n" // dec_video.c & dec_audio.c: Index: help_mp-dk.h =================================================================== RCS file: /cvsroot/mplayer/main/help/help_mp-dk.h,v retrieving revision 1.16 diff -u -r1.16 help_mp-dk.h --- help_mp-dk.h 19 Oct 2002 20:26:04 -0000 1.16 +++ help_mp-dk.h 20 Nov 2002 18:10:25 -0000 @@ -216,7 +216,7 @@ #define MSGTR_OpeningAudioDemuxerFailed "Kan ikke åbne lyddemuxer: %s\n" #define MSGTR_OpeningSubtitlesDemuxerFailed "Kunne ikke åbne undertekstdemuxer: %s\n" #define MSGTR_TVInputNotSeekable "TV input er ikke søgebart! (kan være du skulle skifte kanal ;))\n" -#define MSGTR_DemuxerInfoAlreadyPresent "Demuxer info %s allerede tilstede\n!" +#define MSGTR_DemuxerInfoAlreadyPresent "Demuxer info %s allerede tilstede!\n" #define MSGTR_ClipInfo "Klip info: \n" // dec_video.c & dec_audio.c: Index: help_mp-fr.h =================================================================== RCS file: /cvsroot/mplayer/main/help/help_mp-fr.h,v retrieving revision 1.23 diff -u -r1.23 help_mp-fr.h --- help_mp-fr.h 14 Nov 2002 12:19:31 -0000 1.23 +++ help_mp-fr.h 20 Nov 2002 18:10:30 -0000 @@ -186,7 +186,7 @@ #define MSGTR_TooManyAudioInBuffer "\nDEMUXER: Trop (%d dans %d octets) de packets audio dans le tampon!\n" #define MSGTR_TooManyVideoInBuffer "\nDEMUXER: Trop (%d dans %d octets) de packets vidéo dans le tampon!\n" #define MSGTR_MaybeNI "Peut-être jouez-vous un flux/fichier mal multiplexé, ou le codec n'est pas là...\n"\ - "Pour les fichier .AVI, essayez l'option -ni." + "Pour les fichier .AVI, essayez l'option -ni.\n" #define MSGTR_SwitchToNi "\nFichier .AVI mal multiplexé - passage en mode -ni!\n" #define MSGTR_Detected_XXX_FileFormat "Fichier de type %s détecté!\n" #define MSGTR_DetectedAudiofile "Fichier audio détecté!\n" Index: help_mp-gr.h =================================================================== RCS file: /cvsroot/mplayer/main/help/help_mp-gr.h,v retrieving revision 1.6 diff -u -r1.6 help_mp-gr.h --- help_mp-gr.h 27 Oct 2002 10:43:38 -0000 1.6 +++ help_mp-gr.h 20 Nov 2002 18:10:30 -0000 @@ -228,7 +228,7 @@ #define MSGTR_OpeningAudioDemuxerFailed "Áðïôõ÷ßá êáôÜ ôï Üíïéãìá ôïõ demuxer Þ÷ïõ: %s\n" #define MSGTR_OpeningSubtitlesDemuxerFailed "Áðïôõ÷ßá êáôÜ ôï Üíïéãìá ôïõ demuxer demuxer õðïôßôëùí: %s\n" #define MSGTR_TVInputNotSeekable "TV input äåí åßíáé áíáæçôÞóéìï! (ðéèáíüí ç áíáæÞôçóç íá ãßíåé ãéá ôçí áëëáãÞ óôáèìþí ;)\n" -#define MSGTR_DemuxerInfoAlreadyPresent "Ïé ðëçñïöïñßåò ãéá ôï demuxer %s õðÜñ÷ïõí Þäç\n!" +#define MSGTR_DemuxerInfoAlreadyPresent "Ïé ðëçñïöïñßåò ãéá ôï demuxer %s õðÜñ÷ïõí Þäç!\n" #define MSGTR_ClipInfo "Ðëçñïöïñßåò ôïõ ìÝóïõ: \n" // dec_video.c & dec_audio.c: Index: help_mp-nl.h =================================================================== RCS file: /cvsroot/mplayer/main/help/help_mp-nl.h,v retrieving revision 1.20 diff -u -r1.20 help_mp-nl.h --- help_mp-nl.h 19 Oct 2002 20:26:04 -0000 1.20 +++ help_mp-nl.h 20 Nov 2002 18:10:35 -0000 @@ -216,7 +216,7 @@ #define MSGTR_OpeningAudioDemuxerFailed "Kan audio demuxer niet openen: %s\n" #define MSGTR_OpeningSubtitlesDemuxerFailed "Openen van de ondertiteling demuxer is mislukt: %s\n" #define MSGTR_TVInputNotSeekable "TV invoer is niet doorzoekbaar! (Waarschijnlijk zal zoeken de kanalen veranderen ;)\n" -#define MSGTR_DemuxerInfoAlreadyPresent "Demuxer info %s reeds aanwezig\n!" +#define MSGTR_DemuxerInfoAlreadyPresent "Demuxer info %s reeds aanwezig!\n" #define MSGTR_ClipInfo "Clip info: \n" // dec_video.c & dec_audio.c: Index: help_mp-pt_BR.h =================================================================== RCS file: /cvsroot/mplayer/main/help/help_mp-pt_BR.h,v retrieving revision 1.6 diff -u -r1.6 help_mp-pt_BR.h --- help_mp-pt_BR.h 19 Oct 2002 20:26:04 -0000 1.6 +++ help_mp-pt_BR.h 20 Nov 2002 18:10:37 -0000 @@ -176,7 +176,7 @@ #define MSGTR_MpegNoSequHdr "MPEG: FATAL: EOF enquanto procurava pela sequência de cabeçalho\n" #define MSGTR_CannotReadMpegSequHdr "FATAL: Impossível ler a sequência do cabeçalho!\n" -#define MSGTR_CannotReadMpegSequHdrEx "FATAL: Impossível ler a extensão da sequência de cabeçalhon" +#define MSGTR_CannotReadMpegSequHdrEx "FATAL: Impossível ler a extensão da sequência de cabeçalho\n" #define MSGTR_BadMpegSequHdr "MPEG: Sequência de cabeçalho ruim!\n" #define MSGTR_BadMpegSequHdrEx "MPEG: Extenção da sequência de cabeçalho ruim!\n" Index: help_mp-sk.h =================================================================== RCS file: /cvsroot/mplayer/main/help/help_mp-sk.h,v retrieving revision 1.8 diff -u -r1.8 help_mp-sk.h --- help_mp-sk.h 19 Oct 2002 20:26:04 -0000 1.8 +++ help_mp-sk.h 20 Nov 2002 18:10:40 -0000 @@ -217,7 +217,7 @@ #define MSGTR_OpeningAudioDemuxerFailed "NemôŸem otvori» audio demuxer: %s\n" #define MSGTR_OpeningSubtitlesDemuxerFailed "NemôŸem otvori» demuxer titulkov: %s\n" #define MSGTR_TVInputNotSeekable "v TV vstupe nie je moŸné sa pohybova»! (moŸno posun bude na zmenu kanálov ;)\n" -#define MSGTR_DemuxerInfoAlreadyPresent "Demuxer info %s uŸ prítomné\n!" +#define MSGTR_DemuxerInfoAlreadyPresent "Demuxer info %s uŸ prítomné!\n" #define MSGTR_ClipInfo "Clip info: \n" // dec_video.c & dec_audio.c: Index: help_mp-zh.h =================================================================== RCS file: /cvsroot/mplayer/main/help/help_mp-zh.h,v retrieving revision 1.11 diff -u -r1.11 help_mp-zh.h --- help_mp-zh.h 17 Nov 2002 12:31:02 -0000 1.11 +++ help_mp-zh.h 20 Nov 2002 18:10:42 -0000 @@ -62,8 +62,8 @@ #define MSGTR_NoHomeDir "ÕÒ²»µœHOMEÄ¿ÂŒ\n" #define MSGTR_GetpathProblem "get_path(\"config\")ÎÊÌâ\n" #define MSGTR_CreatingCfgFile "ŽŽœšconfigÎÄŒþ: %s\n" -#define MSGTR_InvalidVOdriver "ÎÞÐ§µÄÊÓÆµÊä³öÇý¶¯: %s\nÓÃ'-vo help' t²é¿Ž¿ÉÓÃµÄÊÓÆµÇý¶¯µÄÁÐ±í" -#define MSGTR_InvalidAOdriver "ÎÞÐ§µÄÊÓÆµÊä³öÇý¶¯: %s\nÓÃ'-vo help' t²é¿Ž¿ÉÓÃµÄÊÓÆµÇý¶¯µÄÁÐ±í" +#define MSGTR_InvalidVOdriver "ÎÞÐ§µÄÊÓÆµÊä³öÇý¶¯: %s\nÓÃ'-vo help' t²é¿Ž¿ÉÓÃµÄÊÓÆµÇý¶¯µÄÁÐ±í\n" +#define MSGTR_InvalidAOdriver "ÎÞÐ§µÄÊÓÆµÊä³öÇý¶¯: %s\nÓÃ'-vo help' t²é¿Ž¿ÉÓÃµÄÊÓÆµÇý¶¯µÄÁÐ±í\n" #define MSGTR_CopyCodecsConf "(°Ñetc/codecs.conf(ŽÓMPlayerµÄÔŽÂëÊ÷ÖÐ)žŽÖÆ/ÁŽœÓ ~/.mplayer/codecs.conf)\n" #define MSGTR_CantLoadFont "ÎÞ·šŒÓÔØ×ÖÌå: %s\n" #define MSGTR_CantLoadSub "ÎÞ·šŒÓÔØ×ÖÄ»: %s\n" @@ -222,7 +222,7 @@ #define MSGTR_OpeningAudioDemuxerFailed "Žò¿ªÒôÆµdemuxer: %sÊ§°Ü\n" #define MSGTR_OpeningSubtitlesDemuxerFailed "Žò¿ª×ÖÄ»demuxer: %sÊ§°Ü\n" #define MSGTR_TVInputNotSeekable "TVÊäÈë²»ÄÜËÑË÷! (¿ÉÄÜËÑË÷ÓŠžÃÓÃÀŽžü»»ÆµµÀ;)\n" -#define MSGTR_DemuxerInfoAlreadyPresent "Demuxer info %s ÒÑŸÏÔÊŸ\n!" +#define MSGTR_DemuxerInfoAlreadyPresent "Demuxer info %s ÒÑŸÏÔÊŸ!\n" #define MSGTR_ClipInfo "Clip info: \n" // dec_video.c & dec_audio.c: #! /bin/bash set -e process() { cpp -dD $1 | sed -ne 's/" *"//g' -e "s/\\\'/\'/g" -e 's/#define $[^ ]*$ $.*$/\1 \2/p' | sort } eng=help_mp-en.h process $eng > engmessages for f in help_mp*h ; do if [ $f = $eng ]; then continue fi l=$(echo $f | sed -ne 's/help_mp-$.*$\.h/\1/p' ) echo processing $l ... join engmessages <(process $f) | sed -ne 's/$[^ ]*$ $".*"$ $".*"$$/msgid \2\ msgstr \3\ /p' > $l.po msgfmt -o "$l.mo" "$l.po" || true done echo creating pot ... sed -ne 's/$[^ ]*$ $".*"$$/msgid \2\ msgstr ""\ /p' < engmessages > mplayer.pot

2 1

[PATCH] README
by Diego Biurrun 17 Oct '03

17 Oct '03

Hello everybody! Hoping to bring the linewrap saga to a good end, here is my latest patch for the README. Lines are wrapped on column 80, meaning there are at most 79 characters of text on one line. The changes: - Added Step0: Getting MPlayer Download instructions are consolidated in one place instead of repeated at 3 different places throughout the text. Plus I included instructions for accessing CVS. - I mention the ~/.mplayer/Skin/ and ~/.mplayer/font/ installation locations for normal users. - A bunch of wording updates. Diego --- README Sat Jun 29 14:01:35 2002 +++ README-diego Sat Jun 29 15:51:40 2002 @@ -4,69 +4,105 @@ MPlayer currently works best from the command line, but there is a GUI with skin support in the alpha development stage. -This document is for getting you started in a few minutes. It cannot answer -all of your questions. If you have problems, please read the documentation in -DOCS/documentation.html. It is extensive and should answer most of your -questions. Also read the manpage to learn how to use MPlayer. +This document is for getting you started in a few minutes. It cannot answer all +of your questions. If you have problems, please read the documentation in +DOCS/documentation.html. It is extensive and should answer most of your +questions. Also read the man page to learn how to use MPlayer. + + +Requirements: +- To compile MPlayer with X11 support, you need to have the XFree86 development + packages installed. +- For the GUI you need the GTK development packages. -To compile MPlayer with X11 support, you need to have the XFree86 development -packages installed, for the GUI you also need the GTK development packages. Before you start... Unless you know what are you doing, consult DOCS/video.html to see which driver -to use with your video card to get the best video quality and performance. -Most cards require special drivers not included with standard X11, to drive -the 2-D video acceleration features (YUV, scaling etc) of your card! +to use with your video card to get the best quality and video performance. Most +cards require special drivers not included with standard X11 to drive their 2-D +video acceleration features like YUV and scaling. A quick and incomplete list of recommendations: -- ATI cards: get the GATOS drivers for X11/Xv or use vidix -- Matrox G200/G4x0/G550: compile and use mga_vid for Linux, use vidix for BSD -- 3dfx Voodoo3/Banshee: get XFree86 4.2.0+ for Xv or use the tdfxfb driver -- nVidia cards: get the X11 driver from www.nvidia.com for Xv support -Without having accelerated video, even a 800MHz P3 may be slow to play DVD! +- ATI cards: Get the GATOS drivers for X11/Xv or use VIDIX. +- Matrox G200/G4x0/G550: Compile and use mga_vid for Linux, on BSD use VIDIX. +- 3dfx Voodoo3/Banshee: Get XFree86 4.2.0+ for XV or use the tdfxfb driver. +- nVidia cards: Get the X11 driver from www.nvidia.com for XV support. +- NeoMagic cards: Get an XV capable driver from our homepage as described in + DOCS/video.html + +Without accelerated video even an 800MHz P3 may be too slow to play DVDs. + + +______________________ +STEP0: Getting MPlayer +~~~~~~~~~~~~~~~~~~~~~~ + +Official releases, prereleases and CVS snapshots are available from the download +section of our homepage at + + http://www.mplayerhq.hu/homepage/dload.html + +You can also get fonts for the onscreen display (OSD), Win32 codecs and a number +of different skins for the GUI there. MPlayer does not come with any of these by +default, so if you want to have the OSD, the GUI or support for more video +formats, download these. + +MPlayer is also available via anonymous CVS. Issue the following commands to +get the latest sources: + + cvs -d:pserver:anonymous@mplayerhq.hu:/cvsroot/mplayer login + cvs -z3 -d:pserver:anonymous@mplayerhq.hu:/cvsroot/mplayer co main + +A directory named 'main' will be created. You can later update your sources with + + cvs -z3 update -dPA + +from within that directory. + ___________________________________ STEP1: Installing FFmpeg libavcodec ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -If you are using an official release, skip this step, since official releases -always include libavcodec. To verify this check if the libavcodec subdirectory -is empty or contains the sources! - The FFmpeg project provides libavcodec, a very portable MPEG4/DivX codec with -excellent speed and quality. It is the preferred codec of MPlayer for playing -mpeg4 and divx video. You have to get libavcodec directly from the FFmpeg CVS -server. Use the following commands in a suitable directory outside the MPlayer -source directory: +excellent speed and quality. It is the preferred MPEG4/DivX codec of MPlayer and +used to be included in the MPlayer CVS tree. This is no longer the case and you +have to get libavcodec directly from the FFmpeg CVS server. + +If you are using an official (pre)release, skip this step, since official +releases include libavcodec. CVS sources and CVS snapshots do not include +libavcodec. To verify if you do have libavcodec or not, check if the libavcodec +subdirectory in the MPlayer source tree is empty or not. + +To get the FFmpeg sources, use the following commands in a suitable directory +outside the MPlayer source directory: cvs -d:pserver:anonymous@cvs.ffmpeg.sourceforge.net:/cvsroot/ffmpeg login -cvs -z9 -d:pserver:anonymous@cvs.ffmpeg.sourceforge.net:/cvsroot/ffmpeg co ffmpeg/libavcodec +cvs -z3 -d:pserver:anonymous@cvs.ffmpeg.sourceforge.net:/cvsroot/ffmpeg co ffmpeg/libavcodec When asked for a password, you can just hit enter. -Now, replace the empty libavcodec directory with the FFmpeg libavcodec source -by removing the libavcodec subdirectory in the MPlayer source tree and then -copying (symbolic linking does not suffice!) the freshly downloaded FFmpeg -libavcodec directory back into the MPlayer source tree. +Now, replace the empty libavcodec directory in the MPlayer source tree with the +FFmpeg libavcodec source by removing the libavcodec subdirectory in the MPlayer +source tree and then copying (symbolic linking does not suffice) the freshly +downloaded FFmpeg libavcodec directory back into the MPlayer source tree. ______________________________ STEP2: Installing Win32 Codecs ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -While MPlayer and libavcodec has built-in support for the most common audio -and video formats, some others are playable only with the Win32 DLLs -or the XAnim binary plugins. Few examples: WMV video, Divx/WMA audio, Indeo. -This step is not mandatory, but recommended for getting MPlayer to play more -different file types! - -Grab the win32 codecs package from the download page +MPlayer and libavcodec have builtin support for the most common audio and video +formats, but some others are playable only with the Win32 DLLs or the XAnim +binary plugins. Examples include WMV video, DivX with WMA audio (not normal DivX +files) and Indeo. This step is not mandatory, but recommended for getting +MPlayer to play more different file types. + +Unpack the codecs archive and put the contents in a directory where MPlayer will +find them. The default directory is /usr/lib/win32/ but you can change that to +something else by using the '--with-win32libdir=DIR' option when you run +'./configure'. - http://www.mplayerhq.hu/homepage/dload.html - -unpack it and put the contents in a directory where MPlayer will find them. -The default directory is /usr/lib/win32/ but you can change that to something -else by using the '--with-win32libdir=DIR' option when you run './configure' . __________________________ STEP3: Configuring MPlayer @@ -76,9 +112,8 @@ ./configure -to configure MPlayer with the default options. The options you installed above -should be autodetected, except GUI support, which has to be enabled separately, -run +to configure MPlayer with the default options. The codecs you installed above +should be autodetected. GUI support has to be enabled separately, run ./configure --enable-gui @@ -95,6 +130,7 @@ the file configure.log for errors and reasons for the failure. Repeat this step until you are satisfied with the enabled feature set. + ________________________ STEP4: Compiling MPlayer ~~~~~~~~~~~~~~~~~~~~~~~~ @@ -109,77 +145,78 @@ provided that you have write permission in the installation directory. -If all went well, you can run MPlayer by typing 'mplayer' -You should get a summary of the most common options and keys (help screen). +If all went well, you can run MPlayer by typing 'mplayer'. A help screen with a +summary of the most common options and keyboard shortcuts should be displayed. -If you get 'unable to load shared library' or similar errors, then run +If you get 'unable to load shared library' or similar errors, run 'ldd ./mplayer' to check which libraries fail and go back to STEP 3 to fix it. -Sometimes just running 'ldconfig' is enough. +Sometimes running 'ldconfig' is enough to fix the problem. NOTE: If you run Debian you can configure, compile and build a proper deb package with only one command: fakeroot debian/rules binary + ____________________________________________ STEP5: Installing the onscreen display fonts ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -To enable OSD (onscreen status display) and ASCII/TEXT subtitles you need some -fonts. Get them from our homepage: +To enable onscreen status display and ASCII subtitles you need some fonts. -http://www.mplayerhq.hu/homepage/dload.html +Unpack the archive and choose one of the available font sizes. Then copy the +font files of the corresponding size into /usr/local/share/mplayer/font/ or +~/.mplayer/font/ (or whatever you set with './configure --datadir=DIR'). -Unpack the archive and choose one of the available font sizes. Then copy the -font files of the corresponding size into /usr/local/share/mplayer/font/ -(or whatever you set with './configure --datadir=DIR'). ____________________________ STEP6: Installing a GUI skin ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Please remember that the GUI is still in the alpha development stage and not -completely finished yet. Features like playlist, preferences and equalizer -do not work at all. Expect them for the 1.0 release -Basic stuff like file selection and seeking works, though. - -If you want to use the GUI you need to download a skin, since MPlayer does not -come with a skin by default. Choose one from the download page +completely finished yet. Features like playlist and preferences do not work at +all. Expect them for the 1.0 release. Basic stuff like file selection and +seeking works, though. + +Unpack the archive and put the contents in /usr/local/share/mplayer/Skin/ or +~/.mplayer/Skin/. MPlayer will use the skin in the default/ subdirectory of +/usr/local/share/mplayer/Skin/ or ~/.mplayer/Skin/ unless told otherwise via the +'-skin' switch. You should therefore rename your skin subdirectory or make a +suitable symbolic link. - http://www.mplayerhq.hu/homepage/dload.html - -unpack it in /usr/local/share/mplayer/Skin/. MPlayer will use the skin in -the default/ subdirectory (/usr/local/share/mplayer/Skin/default/*) unless -told otherwise via the '-skin' switch. You should therefore rename your -skin subdirectory, make a suitable symbolic link or set the skin name in -the file mplayer.conf by 'skin=skinname'. __________________ STEP7: Let's play! ~~~~~~~~~~~~~~~~~~ -That's it for the moment. To start playing movies, open a command line and try +That's it for the moment. To start playing movies, open a command line and try mplayer <moviefile> -or for the GUI: +or for the GUI + mplayer -gui <moviefile> gmplayer <moviefile> - (just 'gmplayer' is enough to use the GUI fileselector) + +gmplayer is a symbolic link to mplayer created by 'make install'. +Without <moviefile>, MPlayer will come up and you will be able to use the GUI +filepicker. To play VCD track or DVD title, try: mplayer -vcd 2 -cdrom-device /dev/hdc mplayer -dvd 1 -alang en -slang hu -dvd-device /dev/hdd -See 'mplayer -help' and 'man mplayer' for further options. +See 'mplayer --help' and 'man mplayer' for further options. 'mplayer -vo help' will show you the available video output drivers. Experiment -with the '-vo' switch to see which one gives you the best performance! -If you get very jerky playback or no sound, experiment with -ao (see -ao help) -Note that jerky playback is caused by buggy audio drivers or too slow cpu/vga. -With a good audio and video driver combination, one can play DVDs and 720x576 -DivX files smoothly on a Celeron 366. For slower systems, you need -framedrop. +with the '-vo' switch to see which one gives you the best performance. +If you get jerky playback or no sound, experiment with the '-ao' switch (see +'-ao help') to choose between different audio drivers. Note that jerky playback +is caused by buggy audio drivers or a slow processor and video card. With a good +audio and video driver combination, one can play DVDs and 720x576 DivX files +smoothly on a Celeron 366. Slower systems may need the '-framedrop' option. Questions you may have are probably answered in the rest of the documentation. -The place to start reading is DOCS/faq.html and DOCS/documentation.html. +The places to start reading are the man page, DOCS/documentation.html and +DOCS/faq.html.

2 3

mga_vid memory detection error
by Eric Lammerts 02 Mar '03

02 Mar '03

Hi, I've got a 16Mb Matrox G400 card that is misdetected as a 32Mb model. The result is a green screen. With mga_ram_size=16, everything works fine. (I'm using the current CVS). Since "lspci -v" reports "16Mb", wouldn't it be a good idea to use the subsystem vendor/device id for the memory detection? Eric dmesg: Matrox MGA G200/G400/G450/G550 YUV Video interface v2.01 (c) Aaron Holtzman & A'rpi mga_vid: Found MGA G400/G450 mga_vid: MMIO at 0xd2882000 IRQ: 10 framebuffer: 0xD4000000 mga_vid: OPTION word: 0x50044120 mem: 0x10 SGRAM mga_vid: detected RAMSIZE is 32 MB syncfb (mga): IRQ disabled in mga_vid.c # lspci -d 102b: -v 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04) (prog-if 00 [VGA]) Subsystem: Matrox Graphics, Inc. Millennium G400 Dual Head 16Mb Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at d4000000 (32-bit, prefetchable) [size=32M] Memory at d6000000 (32-bit, non-prefetchable) [size=16K] Memory at d7000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Capabilities: [f0] AGP version 2.0 # lspci -d 102b: -xxx 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04) 00: 2b 10 25 05 07 00 90 02 04 00 00 03 08 20 00 00 10: 08 00 00 d4 00 00 00 d6 00 00 00 d7 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 2b 10 59 21 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 10 20 40: 20 41 04 50 00 3c 00 00 42 42 ff 42 00 00 00 00 50: 00 30 00 01 21 a4 90 01 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 f0 22 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 02 00 20 00 03 02 00 1f 01 03 00 1f 00 00 00 00

7 7

[BUG] sig11 while moving xmga window in Xinerama mode
by Gabucino 18 Jan '03

18 Jan '03

Setup: two X screens, 1 monitor LeftOf 1 TV (i.e.: one desktop, split to two screens) Start playing with xmga, then grab the window halfway onto the other screen. MPlayer dies. x11, xv works. Hm. xvidix doesn't even start, dies with sig11. I'll write another mail then :) MPlayer CVS-021113-19:15-2.95.3 (C) 2000-2002 Arpad Gereoffy (see DOCS) CPU: Advanced Micro Devices K6-2 (Family: 5, Stepping: 12) CPUflags: MMX: 1 MMX2: 0 3DNow: 1 3DNow2: 0 SSE: 0 SSE2: 0 Compiled with RUNTIME CPU Detection - warning, it's not optimal! To get best performance, recompile MPlayer with --disable-runtime-cpudetection /home/gabucino/.mplayer/config(2): option: vo /home/gabucino/.mplayer/config(2): parameter: xmga,xv /home/gabucino/.mplayer/config(4): option: vop /home/gabucino/.mplayer/config(4): parameter: pp /home/gabucino/.mplayer/config(5): option: autoq /home/gabucino/.mplayer/config(5): parameter: 100 /home/gabucino/.mplayer/config(7): option: fs /home/gabucino/.mplayer/config(7): parameter: igen /home/gabucino/.mplayer/config(10): option: osdlevel /home/gabucino/.mplayer/config(10): parameter: 1 /home/gabucino/.mplayer/config(11): option: framedrop /home/gabucino/.mplayer/config(11): parameter: igen /home/gabucino/.mplayer/config(14): option: cache /home/gabucino/.mplayer/config(14): parameter: 1024 /home/gabucino/.mplayer/config(16): option: nortc /home/gabucino/.mplayer/config(16): parameter: yes Reading /home/gabucino/.mplayer/codecs.conf: 44 audio & 110 video codecs Font /home/gabucino/.mplayer/font/font.desc loaded successfully! (206 chars) Using usleep() timing Could not access the 'termcap' data base. Input config file /home/gabucino/.mplayer/input.conf parsed : 50 binds Playing /home/gabucino/Media/Movie/El-Hazard-TV-OP.mpg Cache fill: 0.00% (0 bytes) Detected MPEG-PS file format! VIDEO: MPEG1 352x240 (aspect 12) 29.97 fps 1439.5 kbps (179.9 kbyte/s) ========================================================================== Opening audio decoder: [mp3lib] MPEG layer-2, layer-3 AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 28000->176400 (224.0 kbit) Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3) ========================================================================== vo: X11 running at 1024x768 with depth 24 and 32 bpp (":1.0" => local display) [x11] Create window for WM detect ... [x11] Unknown wm type... Opening video filter: [pp] ========================================================================== Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough VDec: vo config request - 352 x 240 (preferred csp: Mpeg PES) [PP] Using external postprocessing filter, max q = 6 Couldn't find matching colorspace - retrying with -vop scale... Opening video filter: [scale] Sorry, selected video_out device is incompatible with this codec. VDecoder init failed :( Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder v2.0 libmpeg2: Using MMX for IDCT transform libmpeg2: Using 3DNOW for motion compensation VDec: vo config request - 352 x 240 (preferred csp: Planar YV12) [PP] Using external postprocessing filter, max q = 6 VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is 1.33:1 - prescaling to correct movie aspect. VO: [xmga] 352x240 => 352x264 Planar YV12 [fs] [mga] Using 3 buffers. Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2) ========================================================================== [PP] Using external postprocessing filter, max q = 6 AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit... Start playing... A: 2.7 V: 2.7 A-V: 0.028 ct: -0.017 58/ 58 12% 16% 3.5% 2 1 57% Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 1024 (LWP 7502)] set_window () at mga_common.c:474 474 screens[i].y_org + screens[i].height >= drwcY )) (gdb) bt #0 set_window () at mga_common.c:474 #1 0x8093594 in check_events () at vo_xmga.c:93 #2 0x806ac9c in main (argc=2, argv=0xbffff804) at mplayer.c:1679 #3 0x40c0c906 in __libc_start_main () from /lib/libc.so.6 (gdb) disass $pc-32 $pc+32 Dump of assembler code from 0x809335d to 0x809339d: 0x809335d <set_window+641>: mov $0xd0010841,%edi 0x8093362 <set_window+646>: cmp 0xffffffdc(%ebp),%eax 0x8093365 <set_window+649>: jb 0x8093370 <set_window+660> 0x8093367 <set_window+651>: movswl 0xa(%ecx),%eax 0x809336b <set_window+655>: jmp 0x80933aa <set_window+718> 0x809336d <set_window+657>: lea 0x0(%esi),%esi 0x8093370 <set_window+660>: addl $0x2,0xffffffd8(%ebp) 0x8093374 <set_window+664>: mov 0xffffffd8(%ebp),%esi 0x8093377 <set_window+667>: add $0xc,%edi 0x809337a <set_window+670>: incl 0xfffffff0(%ebp) 0x809337d <set_window+673>: movswl 0x4(%ecx,%edi,1),%edx 0x8093382 <set_window+678>: mov %esi,0xffffffe0(%ebp) 0x8093385 <set_window+681>: cmp 0xffffffec(%ebp),%edx 0x8093388 <set_window+684>: ja 0x8093370 <set_window+660> 0x809338a <set_window+686>: mov 0x82f1600,%esi 0x8093390 <set_window+692>: movswl 0x6(%ecx,%edi,1),%ebx 0x8093395 <set_window+697>: cmp %esi,%ebx 0x8093397 <set_window+699>: ja 0x8093370 <set_window+660> 0x8093399 <set_window+701>: movswl 0x8(%ecx,%edi,1),%eax End of assembler dump. (gdb) info all-registers eax 0x0 0 ecx 0x8416fc8 138506184 edx 0x0 0 ebx 0x0 0 esp 0xbfffe534 0xbfffe534 ebp 0xbfffe57c 0xbfffe57c esi 0x18ab4 101044 edi 0x94038 606264 eip 0x809337d 0x809337d eflags 0x210206 2163206 cs 0x23 35 ss 0x2b 43 ds 0x2b 43 es 0x2b 43 fs 0x0 0 gs 0x0 0 st0 -NaN(0x8b8a8a8a8b8b8b8d) (raw 0xffff8b8a8a8a8b8b8b8d) st1 -NaN(0x8688888888898a8a) (raw 0xffff8688888888898a8a) st2 -NaN(0x8383848586868788) (raw 0xffff8383848586868788) st3 -NaN(0x8a8a8b8b8c8c8b86) (raw 0xffff8a8a8b8b8c8c8b86) st4 -NaN(0x8b8b8b8b8b8b8b8b) (raw 0xffff8b8b8b8b8b8b8b8b) st5 768 (raw 0x4008c000000000000000) st6 768 (raw 0x4008c000000000000000) ---Type <return> to continue, or q <return> to quit--- st7 1.3333333333333333333694734057495168 (raw 0x3fffaaaaaaaaaaaaaaab) fctrl 0x37f 895 fstat 0x320 800 ftag 0xffff 65535 fiseg 0x23 35 fioff 0x80814c1 134747329 foseg 0x2b 43 fooff 0x80df790 135133072 fop 0x11d 285 -- Gabucino

4 10

bug repport with surround
by j.a.l 04 Jan '03

04 Jan '03

from pre8 to pre9 and cvc ( 20021101 ), use of surround plugin cause a slowdown of playing ( ~ 100% playback, sound+vid still sync but no cpu over use ). pl_surround.c is same from pre8 to pre9, may something with new audio layer. happend with every movies so no need of record. 2) while checking whether bug happened with evey movie, found a clip that crach mplayer, uploaded as "crash_with_surround.avi" to ftp://mplayerhq.hu/MPlayer/incoming/ every info ( comp+system+log+commandline ) in attached file. A+ //******************************************************************************* FROM : j.a.l(a)free.fr, //******************************************************************************* surround on make every clip slowdown ( playback, not cpu ), this clip also chesh mplayer uploader 5Mb, ask for more. file name : "crash_with_surround.avi" compiled with : ./configure --disable-tv Config files successfully generated by ./configure ! Install prefix: /usr/local Data directory: /usr/local/share/mplayer Config direct.: /usr/local/etc/mplayer Byte order: Little Endian Optimizing for: i686 mmx mmx2 3dnow 3dnowex sse mtrr Enabled optional drivers: Input: network dvdnav dvdcss mpdvdkit2 vcd Codecs: divx4linux real directshow win32 Audio output: oss sdl mpegpes(file) Video output: xvidix sdl vesa gif89a jpeg png mpegpes(file) fbdev opengl dga xv x11 Disabled optional drivers: Input: tv-v4l tv-bsdbt848 tv cdda dvdread Codecs: xvid libdv libavcodec xanim libvorbis libmad liblzo Audio output: sgi sun alsa arts dxr2 nas win32 Video output: bl zr dxr3 dxr2 directx svga aa ggi xmga mga directfb tdfxfb 3dfx system info : xp1800, 256kb, live! red hat like, XF86 4.2.0, kernel 2.4.19, gcc 2.95, ld 1.9.5, libc6-2.2.7, bin 2.10 mplayer stand alone and frontend ( not notive gui ) command line : mplayer -v -aop list=surround "Married with Children_Lost Episode (not seen in Usa).avi" //******************************************************************************* // start of mplayer output //******************************************************************************* Using GNU internationalization Original domain: messages Original dirname: /usr/share/locale Current domain: mplayer Current dirname: /usr/local/share/locale MPlayer CVS-021101-00:00-2.95.3 (C) 2000-2002 Arpad Gereoffy (see DOCS) CPU: Advanced Micro Devices Athlon 4 PM Palomino/Athlon MP Multiprocessor/Athlon XP eXtreme Performance (Family: 6, Stepping: 2) CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0 Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE Reading /root/.mplayer/codecs.conf: 41 audio & 110 video codecs CommandLine: '-v' '-aop' 'list=surround' 'Married with Children_Lost Episode (not seen in Usa).avi' get_path('font/font.desc') -> '/root/.mplayer/font/font.desc' Font /root/.mplayer/font/font.desc loaded successfully! (206 chars) Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay Failed to open /dev/rtc: No such device (mplayer should be setuid root or /dev/rtc should be readable by the user.) Using usleep() timing get_path('input.conf') -> '/root/.mplayer/input.conf' Can't open input config file /root/.mplayer/input.conf : No such file or directory Can't open input config file /usr/local/etc/mplayer/input.conf : No such file or directory Falling back on default (hardcoded) input config Playing Married with Children_Lost Episode (not seen in Usa).avi Not an URL! File size is 36864000 bytes Detected AVI file format! list_end=0x2292 ======= AVI Header ======= us/frame: 40000 (fps=25.000) max bytes/sec: 0 padding: 0 MainAVIHeader.dwFlags: (272) HAS_INDEX IS_INTERLEAVED frames total: 32263 initial: 0 streams: 2 Suggested BufferSize: 0 Size: 192 x 142 list_end=0x10F4 ==> Found video stream: 0 ======= STREAM Header ======= Type: vids FCC: div4 (34766964) Flags: 0 Priority: 0 Language: 0 InitialFrames: 0 Rate: 1000000/40000 = 25.000 Start: 0 Len: 32263 Suggested BufferSize: 7082 Quality 10000 Sample size: 0 found 'bih', 40 bytes of 40 ======= VIDEO Format ====== biSize 40 biWidth 192 biHeight 142 biPlanes 1 biBitCount 24 biCompression 861292868='DIV3' biSizeImage 81792 =========================== Regenerating keyframe table for DIVX 3 video list_end=0x2186 ==> Found audio stream: 1 ======= STREAM Header ======= Type: auds FCC: (0) Flags: 0 Priority: 0 Language: 0 InitialFrames: 1 Rate: 2239/1 = 2239.000 Start: 0 Len: 2890368 Suggested BufferSize: 916 Quality -1 Sample size: 1 found 'wf', 30 bytes of 18 ======= WAVE Format ======= Format Tag: 85 (0x55) Channels: 2 Samplerate: 11025 avg byte/sec: 2239 Block align: 1 bits/sample: 0 cbSize: 12 mp3.wID=1 mp3.fdwFlags=0x2 mp3.nBlockSize=468 mp3.nFramesPerBlock=4 mp3.nCodecDelay=1393 list_end=0x2292 Broken chunk? chunksize=1382 (id=JUNK) list_end=0x22493C0 Found movie at 0x280C - 0x22493C0 Reading INDEX block, 56956 chunks for 32263 frames (fpos=0x22493c8) AVI index offset: 0x2808 (movi=0x280C idx0=0x4 idx1=0x3A0) Auto-selected AVI audio ID = 1 Auto-selected AVI video ID = 0 AVI: Searching for audio stream (id:1) AVI video length=32595292 VIDEO: [DIV3] 192x142 24bpp 25.00 fps 202.1 kbps (24.7 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:192x142 fps:25.00 ftime:=0.0400 get_path('sub/') -> '/root/.mplayer/sub/' ========================================================================== Opening audio decoder: [mp3lib] MPEG layer-2, layer-3 dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer mp3lib: made decode tables with MMX optimization init layer2&3 finished, tables done mp3lib: using 3DNow!Ex optimized decore! MPEG 2.5, Layer III, 11025 Hz 24 kbit Joint-Stereo, BPF: 156 Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0 AUDIO: 11025 Hz, 2 ch, 16 bit (0x10), ratio: 3000->44100 (24.0 kbit) Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3) ========================================================================== X11 opening display: :0.0 vo: X11 color mask: FFFF (R:F800 G:7E0 B:1F) vo: X11 running at 1280x1024 with depth 16 and 16 bpp (":0.0" => local display) ========================================================================== Requested video codec family [ffdivx] (vfm=ffmpeg) not available (enable it at compilation!) Opening video decoder: [odivx] DivX4Linux lib (odivx mode) INFO: OpenDivX video codec init OK! VDec: vo config request - 192 x 142 (preferred csp: Planar YV12) [PP] Using codec's postprocessing, max q = 9 VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is undefined - no prescaling applied. VO Config (192x142->192x142,flags=0,'MPlayer',0x32315659) VO: [xv] 192x142 => 192x142 Planar YV12 VO: Description: X11/Xv VO: Author: Gerd Knorr <kraxel(a)goldbach.in-berlin.de> and others Xvideo image format: 0x32595559 (YUY2) packed Xvideo image format: 0x32315659 (YV12) planar Xvideo image format: 0x59565955 (UYVY) packed Xvideo image format: 0x30323449 (I420) planar using Xvideo port 63 for hw scaling [xv] dx: 0 dy: 0 dw: 192 dh: 152 Selected video codec: [odivx] vfm:odivx (OpenDivX API (ODIVX,DIVX4,DIVX5,XVID)) ========================================================================== pl_surround: init input rate=11025, channels=2 pl_surround: 20msec surround delay, rate 11025 - buffers are 502 bytes each MPlayer interrupted by signal 11 in module: ao2_init - MPlayer crashed by bad usage of CPU/FPU/RAM. Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and disassembly. For details, see DOCS/bugreports.html section 5.b. - MPlayer crashed. This shouldn't happen. It can be a bug in the MPlayer code _or_ in your drivers _or_ in your gcc version. If you think it's MPlayer's fault, please read DOCS/bugreports.html and follow instructions there. We can't and won't help unless you provide these informations when reporting a possible bug. uninit audio: mp3lib

4 4

[BUG] -vc divx4vfw playing doesn't work, but who cares ;))
by Gabucino 02 Jan '03

02 Jan '03

=== =1= === Description: ------------ This happens with ALL my DivXes, with -vc divx4vfw 492544 Jul 12 17:52 /usr/lib/win32/divx.dll (AFAIR a DivX4 DLL) Output: ------- Using GNU internationalization Original domain: messages Original dirname: /usr/share/locale Current domain: mplayer Current dirname: /usr/local/share/locale [0;30m*** COLOR TEST 0 *** [0;31m*** COLOR TEST 1 *** [0;32m*** COLOR TEST 2 *** [0;33m*** COLOR TEST 3 *** [0;34m*** COLOR TEST 4 *** [0;35m*** COLOR TEST 5 *** [0;36m*** COLOR TEST 6 *** [0;37m*** COLOR TEST 7 *** [1;30m*** COLOR TEST 8 *** [1;31m*** COLOR TEST 9 *** [1;32m*** COLOR TEST 10 *** [1;33m*** COLOR TEST 11 *** [1;34m*** COLOR TEST 12 *** [1;35m*** COLOR TEST 13 *** [1;36m*** COLOR TEST 14 *** [1;37m*** COLOR TEST 15 *** [1;37m MPlayer CVS-021116-14:32-2.95.3 (C) 2000-2002 Arpad Gereoffy (see DOCS) [1;37mCPU: Advanced Micro Devices K6-2 [1;37m(Family: 5, Stepping: 12) [1;37mCPUflags: MMX: 1 MMX2: 0 3DNow: 1 3DNow2: 0 SSE: 0 SSE2: 0 [1;37mCompiled with RUNTIME CPU Detection - warning, it's not optimal! To get best performance, recompile MPlayer with --disable-runtime-cpudetection [1;37mReading config file /usr/local/etc/mplayer/mplayer.conf[1;31m: No such file or directory [1;37mReading config file /home/gabucino/.mplayer/config[1;37m [1;37mReading /home/gabucino/.mplayer/codecs.conf: [1;37m44 audio & 110 video codecs [1;37mCommandLine: 'test.avi' '-vc' 'divx4vfw' '-v' [0;36mget_path('font/font.desc') -> '/home/gabucino/.mplayer/font/font.desc' Font /home/gabucino/.mplayer/font/font.desc loaded successfully! (206 chars) [1;37mUsing MMX (with tiny bit 3DNow) Optimized OnScreenDisplay [1;37mUsing usleep() timing Could not access the 'termcap' data base. [0;36mget_path('input.conf') -> '/home/gabucino/.mplayer/input.conf' [0;36mParsing input config file /home/gabucino/.mplayer/input.conf [1;37mInput config file /home/gabucino/.mplayer/input.conf parsed : 51 binds [1;37m [1;37mPlaying test.avi [0;36mNot an URL! [0;36mFile size is 47733616 bytes [0;36mCACHE_PRE_INIT: 0 [0] 0 pre:0 eof:0 [0;37m Cache fill: 0.00% (0 bytes) [1;37mDetected AVI file format! [0;36mlist_end=0x13A ======= AVI Header ======= us/frame: 33333 (fps=30.000) max bytes/sec: 0 padding: 0 MainAVIHeader.dwFlags: (2320) HAS_INDEX IS_INTERLEAVED TRUST_CKTYPE frames total: 7098 initial: 0 streams: 2 Suggested BufferSize: 0 Size: 640 x 480 [0;36mlist_end=0xD4 [0;36m==> Found video stream: 0 ======= STREAM Header ======= Type: vids FCC: (0) Flags: 0 Priority: 0 Language: 0 InitialFrames: 0 Rate: 300000/10000 = 30.000 Start: 0 Len: 7098 Suggested BufferSize: 8411 Quality 0 Sample size: 0 [0;36mfound 'bih', 40 bytes of 40 ======= VIDEO Format ====== biSize 40 biWidth 640 biHeight 480 biPlanes 1 biBitCount 24 biCompression 861292868='DIV3' biSizeImage 921600 =========================== [0;36mRegenerating keyframe table for DIVX 3 video [0;36mlist_end=0x13A [0;36m==> Found audio stream: 1 ======= STREAM Header ======= Type: auds FCC: (0) Flags: 0 Priority: 0 Language: 0 InitialFrames: 0 Rate: 176400/4 = 44100.000 Start: 0 Len: 10434060 Suggested BufferSize: 88200 Quality 0 Sample size: 4 [0;36mfound 'wf', 18 bytes of 18 ======= WAVE Format ======= Format Tag: 1 (0x1) Channels: 2 Samplerate: 44100 avg byte/sec: 176400 Block align: 4 bits/sample: 16 cbSize: 0 [0;36mlist_end=0x170 [0;36mhdr=Software size=34 [0;36mSoftware : MEncoder CVS-021113-17:40-2.95.3 [0;36mBroken chunk? chunksize=1672 (id=JUNK) [0;36mlist_end=0x2D68228 [0;36mFound movie at 0x80C - 0x2D68228 [0;36mReading INDEX block, 7572 chunks for 7098 frames (fpos=0x2d68230) [0;36mAVI index offset: 0x808 (movi=0x80C idx0=0x4 idx1=0x15894) [0;36mAuto-selected AVI audio ID = 1 [0;36mAuto-selected AVI video ID = 0 [0;36mAVI: Searching for audio stream (id:1) [0;36mAVI video length=37115768 [1;37mVIDEO: [DIV3] 640x480 24bpp 30.00 fps 1255.0 kbps (153.2 kbyte/s) [0;36m[V] filefmt:3 fourcc:0x33564944 size:640x480 fps:30.00 ftime:=0.0333 [1;37mClip info: [1;37m Software: MEncoder CVS-021113-17:40-2.95.3 [0;36mget_path('sub/') -> '/home/gabucino/.mplayer/sub/' [1;37m========================================================================== [1;37mOpening audio decoder: [pcm] Uncompressed PCM audio decoder [0;36mdec_audio: Allocating 2048 + 65536 = 67584 bytes for output buffer [1;37mAUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 176400->176400 (1411.2 kbit) [1;37mSelected audio codec: [pcm] afm:pcm (Uncompressed PCM) [1;37m========================================================================== open: No such device vo_mga: Couldn't open /dev/mga_vid [0;36mX11 opening display: :1.0 [0;36mvo: X11 color mask: FFFFFF (R:FF0000 G:FF00 B:FF) [1;37mvo: X11 running at 1024x768 with depth 24 and 32 bpp (":1.0" => local display) [1;37mOpening video filter: [pp] [0;36m[vo] query(Planar YV12) -> 3 [1;37m========================================================================== [1;37mForced video codec: divx4vfw [1;37mOpening video decoder: [vfw] Win32/VfW video codecs [0;36m======= Win32 (VFW) VIDEO Codec init ======= Loading codec DLL: 'divx.dll' External func COMCTL32.dll:17 [0;36mget_path('registry') -> '/home/gabucino/.mplayer/registry' Loaded DLL driver divx.dll [0;36mICDecompressGetFormatSize ret: 112 [0;36mICDecompressGetFormat OK [1;37mVDec: vo config request - 640 x 480 (preferred csp: Packed YUY2) [1;37m[PP] Using external postprocessing filter, max q = 6 [1;37mCouldn't find matching colorspace - retrying with -vop scale... [1;37mOpening video filter: [scale] [0;36mSwScale params: -1 x -1 (-1=no scaling) [0;36mscale: query(BGR 32-bit) -> 0 [0;36mscale: query(RGB 32-bit) -> 0 [0;36mscale: query(BGR 24-bit) -> 0 [0;36mscale: query(RGB 24-bit) -> 0 [0;36mscale: query(BGR 16-bit) -> 0 [0;36mscale: query(RGB 16-bit) -> 0 [0;36mscale: query(BGR 15-bit) -> 0 [0;36mscale: query(RGB 15-bit) -> 0 [0;36mscale: query(BGR 8-bit) -> 0 [0;36mscale: query(RGB 8-bit) -> 0 [0;36mscale: query(BGR 4-bit) -> 0 [0;36mscale: query(RGB 4-bit) -> 0 [0;36mscale: query(BGR 1-bit) -> 0 [0;36mscale: query(RGB 1-bit) -> 0 [0;36mscale: query(Planar 444P) -> 0 [0;36mscale: query(Planar 422P) -> 0 [0;36mscale: query(Planar YV12) -> 3 [0;36mscale: query(BGR 32-bit) -> 0 [0;36mscale: query(RGB 32-bit) -> 0 [0;36mscale: query(BGR 24-bit) -> 0 [0;36mscale: query(RGB 24-bit) -> 0 [0;36mscale: query(BGR 16-bit) -> 0 [0;36mscale: query(RGB 16-bit) -> 0 [0;36mscale: query(BGR 15-bit) -> 0 [0;36mscale: query(RGB 15-bit) -> 0 [0;36mscale: query(BGR 8-bit) -> 0 [0;36mscale: query(RGB 8-bit) -> 0 [0;36mscale: query(BGR 4-bit) -> 0 [0;36mscale: query(RGB 4-bit) -> 0 [0;36mscale: query(BGR 1-bit) -> 0 [0;36mscale: query(RGB 1-bit) -> 0 [0;36mscale: query(Planar 444P) -> 0 [0;36mscale: query(Planar 422P) -> 0 [0;36mscale: query(Planar YV12) -> 3 [0;36mscale: query(BGR 32-bit) -> 0 [0;36mscale: query(RGB 32-bit) -> 0 [0;36mscale: query(BGR 24-bit) -> 0 [0;36mscale: query(RGB 24-bit) -> 0 [0;36mscale: query(BGR 16-bit) -> 0 [0;36mscale: query(RGB 16-bit) -> 0 [0;36mscale: query(BGR 15-bit) -> 0 [0;36mscale: query(RGB 15-bit) -> 0 [0;36mscale: query(BGR 8-bit) -> 0 [0;36mscale: query(RGB 8-bit) -> 0 [0;36mscale: query(BGR 4-bit) -> 0 [0;36mscale: query(RGB 4-bit) -> 0 [0;36mscale: query(BGR 1-bit) -> 0 [0;36mscale: query(RGB 1-bit) -> 0 [0;36mscale: query(Planar 444P) -> 0 [0;36mscale: query(Planar 422P) -> 0 [0;36mscale: query(Planar YV12) -> 3 [0;36mscale: query(BGR 32-bit) -> 0 [0;36mscale: query(RGB 32-bit) -> 0 [0;36mscale: query(BGR 24-bit) -> 0 [0;36mscale: query(RGB 24-bit) -> 0 [0;36mscale: query(BGR 16-bit) -> 0 [0;36mscale: query(RGB 16-bit) -> 0 [0;36mscale: query(BGR 15-bit) -> 0 [0;36mscale: query(RGB 15-bit) -> 0 [0;36mscale: query(BGR 8-bit) -> 0 [0;36mscale: query(RGB 8-bit) -> 0 [0;36mscale: query(BGR 4-bit) -> 0 [0;36mscale: query(RGB 4-bit) -> 0 [0;36mscale: query(BGR 1-bit) -> 0 [0;36mscale: query(RGB 1-bit) -> 0 [0;36mscale: query(Planar 444P) -> 0 [0;36mscale: query(Planar 422P) -> 0 [0;36mscale: query(Planar YV12) -> 3 [1;37mVDec: using Packed YUY2 as output csp (no 0) [1;37mMovie-Aspect is undefined - no prescaling applied. [0;36mVO Config (640x480->640x480,flags=1,'MPlayer',0x32595559) [0;36mscale: query(BGR 32-bit) -> 0 [0;36mscale: query(RGB 32-bit) -> 0 [0;36mscale: query(BGR 24-bit) -> 0 [0;36mscale: query(RGB 24-bit) -> 0 [0;36mscale: query(BGR 16-bit) -> 0 [0;36mscale: query(RGB 16-bit) -> 0 [0;36mscale: query(BGR 15-bit) -> 0 [0;36mscale: query(RGB 15-bit) -> 0 [0;36mscale: query(BGR 8-bit) -> 0 [0;36mscale: query(RGB 8-bit) -> 0 [0;36mscale: query(BGR 4-bit) -> 0 [0;36mscale: query(RGB 4-bit) -> 0 [0;36mscale: query(BGR 1-bit) -> 0 [0;36mscale: query(RGB 1-bit) -> 0 [0;36mscale: query(Planar 444P) -> 0 [0;36mscale: query(Planar 422P) -> 0 [0;36mscale: query(Planar YV12) -> 3 [1;37mSwScaler: reducing / aligning filtersize 1 -> 4 [1;37mSwScaler: reducing / aligning filtersize 1 -> 4 [1;37mSwScaler: reducing / aligning filtersize 1 -> 1 [1;37mSwScaler: reducing / aligning filtersize 9 -> 8 [1;37m SwScaler: BICUBIC scaler, [1;37mfrom Packed YUY2 to Planar YV12 [1;37musing 3DNOW [0;36mSwScaler: using 4-tap MMX scaler for horizontal luminance scaling [0;36mSwScaler: using 4-tap MMX scaler for horizontal chrominance scaling [0;36mSwScaler: using 1-tap MMX "scaler" for vertical scaling (YV12 like) [0;36mSwScaler: 640x480 -> 640x480 [0;36mREQ: flags=0xC37 req=0x0 [0;36mREQ: flags=0x437 req=0x0 [1;37mVO: [xv] 640x480 => 640x480 Planar YV12 [fs] [0;36mVO: Description: X11/Xv [0;36mVO: Author: Gerd Knorr <kraxel(a)goldbach.in-berlin.de> and others [0;36mXvideo image format: 0x32595559 (YUY2) packed [0;36mXvideo image format: 0x32315659 (YV12) planar [0;36mXvideo image format: 0x59565955 (UYVY) packed [0;36mXvideo image format: 0x30323449 (I420) planar [0;36mXvideo image format: 0x3 ( ) packed [0;36musing Xvideo port 85 for hw scaling [0;36m[xv-fs] dx: 0 dy: 0 dw: 1024 dh: 768 [0;36m[xv] dx: 0 dy: 0 dw: 1024 dh: 768 [0;36mICDecompressQuery OK [0;36mInput format: ======= VIDEO Format ====== biSize 40 biWidth 640 biHeight 480 biPlanes 1 biBitCount 24 biCompression 861292868='DIV3' biSizeImage 921600 =========================== [0;36mOutput format: ======= VIDEO Format ====== biSize 40 biWidth 640 biHeight -480 biPlanes 1 biBitCount 16 biCompression 844715353='YUY2' biSizeImage 614400 =========================== [0;36mINFO: Win32 video codec init OK! [1;37mSelected video codec: [divx4vfw] vfm:vfw (DivX4Windows-VFW) [1;37m========================================================================== [1;37m[PP] Using external postprocessing filter, max q = 6 [0;36mAutoQ: setting quality to 6 [0;36mao2: 44100 Hz 2 chans Signed 16-bit (Little-Endian) [0;36maudio_setup: using '/dev/dsp' dsp device [0;36maudio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian)) [0;36maudio_setup: using 2 channels (requested: 2) [0;36maudio_setup: using 44100 Hz samplerate (requested: 44100) [0;36maudio_setup: frags: 16/16 (4096 bytes/frag) free: 65536 [1;37mAO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) [0;36mAO: Description: OSS/ioctl audio output AO: Author: A'rpi [1;37mBuilding audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit... [0;36mAdding filter dummy [0;36m[dummy] Was reinitialized, rate=44100Hz, nch = 2, format = 0x00000001 and bps = 2 [0;36m[dummy] Was reinitialized, rate=44100Hz, nch = 2, format = 0x00000001 and bps = 2 [1;37mStart playing... [0;36m*** [scale] Allocating mp_image_t, 640x480x16bpp YUV packed, 614400 bytes [0;36m*** [pp] Allocating mp_image_t, 640x480x12bpp YUV planar, 460800 bytes [0;36m*** [vo] Allocating mp_image_t, 640x480x12bpp YUV planar, 460800 bytes [0;36m[xv] dx: 0 dy: 0 dw: 1024 dh: 768 [0;36m[xv-fs] dx: 0 dy: 0 dw: 1024 dh: 768 [0;37mA: 0.2 V: 0.0 A-V: 0.171 ct: 0.000 1/ 1 0% 0% 0.0% 0 6 89% [0;36mXXX initial v_pts=0.000 a_pos=88200 (0.500) [1;31m MPlayer interrupted by signal 11 in module: decode_video [1;31m- MPlayer crashed by bad usage of CPU/FPU/RAM. Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and disassembly. For details, see DOCS/bugreports.html section 5.b. [1;31m- MPlayer crashed. This shouldn't happen. It can be a bug in the MPlayer code _or_ in your drivers _or_ in your gcc version. If you think it's MPlayer's fault, please read DOCS/bugreports.html and follow instructions there. We can't and won't help unless you provide these informations when reporting a possible bug. [0;36mUninit audio filters... [0;36muninit audio: pcm [0;36muninit video: vfw FATAL releasing corrupted memory! 0x83b6080 0x69676572 (15) FATAL releasing corrupted memory! 0x83b6080 0x69676572 (15) FATAL releasing corrupted memory! 0x8440808 0xffffffff (15) FATAL releasing corrupted memory! 0x8440808 0xffffffff (15) FATAL releasing corrupted memory! 0x83b60a8 0x0 (15) FATAL releasing corrupted memory! 0x83b60a8 0x0 (15) FATAL releasing corrupted memory! 0x83b6f18 0x0 (13) FATAL releasing corrupted memory! 0x83b6f18 0x0 (13) FATAL releasing corrupted memory! 0x83b6eb8 0x0 (13) FATAL releasing corrupted memory! 0x83b6eb8 0x0 (13) FATAL releasing corrupted memory! 0x83b6e90 0x0 (13) FATAL releasing corrupted memory! 0x83b6e90 0x0 (13) FATAL releasing corrupted memory! 0x83b6e68 0x0 (13) FATAL releasing corrupted memory! 0x83b6e68 0x0 (13) FATAL releasing corrupted memory! 0x83b6e40 0x0 (12) FATAL releasing corrupted memory! 0x83b6e40 0x0 (12) FATAL releasing corrupted memory! 0x83b6e18 0x0 (12) FATAL releasing corrupted memory! 0x83b6e18 0x0 (12) FATAL releasing corrupted memory! 0x83b6df0 0x0 (12) FATAL releasing corrupted memory! 0x83b6df0 0x0 (12) FATAL releasing corrupted memory! 0x83b6dc8 0x0 (12) FATAL releasing corrupted memory! 0x83b6dc8 0x0 (12) FATAL releasing corrupted memory! 0x83b6da0 0x0 (12) FATAL releasing corrupted memory! 0x83b6da0 0x0 (12) FATAL releasing corrupted memory! 0x83b6d78 0x0 (12) FATAL releasing corrupted memory! 0x83b6d78 0x0 (12) FATAL releasing corrupted memory! 0x84a9bb0 0xff00ff (15) FATAL releasing corrupted memory! 0x84a9bb0 0xff00ff (15) FATAL releasing corrupted memory! 0x83bcc88 0x42475218 (14) FATAL releasing corrupted memory! 0x83bcc88 0x42475218 (14) FATAL releasing corrupted memory! 0x83b97d8 0x0 (13) FATAL releasing corrupted memory! 0x83b97d8 0x0 (13) FATAL releasing corrupted memory! 0x83b6d50 0x84269f0 (12) FATAL releasing corrupted memory! 0x83b6d50 0x84269f0 (12) FATAL releasing corrupted memory! 0x84aac00 0xb (11) FATAL releasing corrupted memory! 0x84aac00 0xb (11) FATAL releasing corrupted memory! 0x84abc50 0x3 (10) FATAL releasing corrupted memory! 0x84abc50 0x3 (10) FATAL releasing corrupted memory! 0x84acca0 0x0 (9) FATAL releasing corrupted memory! 0x84acca0 0x0 (9) FATAL releasing corrupted memory! 0x83b5d58 0x0 (8) FATAL releasing corrupted memory! 0x83b5d58 0x0 (8) FATAL releasing corrupted memory! 0x83b5d30 0x0 (8) FATAL releasing corrupted memory! 0x83b5d30 0x0 (8) FATAL releasing corrupted memory! 0x83b5d08 0x0 (8) FATAL releasing corrupted memory! 0x83b5d08 0x0 (8) FATAL releasing corrupted memory! 0x83b5d80 0x0 (8) FATAL releasing corrupted memory! 0x83b5d80 0x0 (8) Total Unfree 24576 bytes cnt 6 [(nil),0] [0;36mDEMUXER: freeing demuxer at 0x83bcd38 [0;36mvo: uninit ... Debug: ------ Works correctly in gdb :)) P.s.: Whoa, just found -vop test. Cool :) However, using -vop 1bpp,test doesn't work, -vop 1bpp,scale,test does. Why? -- Gabucino

2 3

[BUG] bug (misfeature) in key caching part of mpdvdkit
by Gabucino 02 Jan '03

02 Jan '03

The output says it all.. Playing -dvd-device /mnt/nfs_share works, but key caching creates horked files. BTW: eh.. 10mbit network isn't enough for DVD playing ;( MPlayer CVS-021112-09:28-2.95.3 (C) 2000-2002 Arpad Gereoffy (see DOCS) CPU: Advanced Micro Devices K6-2 (Family: 5, Stepping: 12) CPUflags: MMX: 1 MMX2: 0 3DNow: 1 3DNow2: 0 SSE: 0 SSE2: 0 Compiled with RUNTIME CPU Detection - warning, it's not optimal! To get best performance, recompile MPlayer with --disable-runtime-cpudetection Reading /home/gabucino/.mplayer/codecs.conf: can't open '/home/gabucino/.mplayer/codecs.conf': No such file or directory Reading /usr/local/etc/mplayer/codecs.conf: 44 audio & 111 video codecs font: can't open file: /home/gabucino/.mplayer/font/font.desc font: can't open file: /usr/local/share/mplayer/font/font.desc Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup scripts. Using usleep() timing Could not access the 'termcap' data base. Can't open input config file /home/gabucino/.mplayer/input.conf : No such file or directory Can't open input config file /usr/local/etc/mplayer/input.conf : No such file or directory Falling back on default (hardcoded) input config Playing DVD title 1 libdvdread: Attempting to use device 10.0.0.1:/mnt/cd mounted on /mnt/dvd for CSS authentication libdvdread: Could not open device with libdvdcss. libdvdread: Can't open 10.0.0.1:/mnt/cd for reading libdvdread: Device 10.0.0.1:/mnt/cd inaccessible, CSS authentication not available. Reading disc structure, please wait... There are 4 titles on this DVD. There are 28 chapters in this DVD title. There are 1 angles in this DVD title. Using CSS Key-cache dir: /home/gabucino/.mplayer/DVDKeys/0000000000000000 Using CSS Key-cache dir: /home/gabucino/.mplayer/DVDKeys/ZUĂ 0˙_>|ůóçĎ>|ůóçĎ>|ůóçĎ>| Using CSS Key-cache dir: /home/gabucino/.mplayer/DVDKeys/6Đ+SLfN@űD ]z3Ę$Ďťv 9Ml Using CSS Key-cache dir: /home/gabucino/.mplayer/DVDKeys/ ŔvÔX Using CSS Key-cache dir: /home/gabucino/.mplayer/DVDKeys/ŐÜ,Ëâšv>ÉP +ĽÂrű|ďČńIpx Using CSS Key-cache dir: /home/gabucino/.mplayer/DVDKeys/(äŕźWÜ>ŕÔđ 8#Ľ Ť˘B Ůö|& Using CSS Key-cache dir: /home/gabucino/.mplayer/DVDKeys/'pĘ¨ěu@Ű,>mýˇéŢR˘Ěšˇ$}˝Ű* Using CSS Key-cache dir: /home/gabucino/.mplayer/DVDKeys/¨QL/c6=y[ăů:G@ĺ)oEä}ZĄĘě<> DVD successfully opened! Detected MPEG-PS file format! VIDEO: MPEG2 720x576 (aspect 3) 25.00 fps 12250.0 kbps (1531.2 kbyte/s) ========================================================================== Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough VDec: vo config request - 720 x 576 (preferred csp: Mpeg PES) VDec: using Mpeg PES as output csp (no 0) Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. VO: [null] 720x576 => 1024x576 Mpeg PES Selected video codec: [mpegpes] vfm:mpegpes (Mpeg PES output (.mpg or Dxr3/DVB card)) ========================================================================== Audio: no sound!!! Start playing... V: 8.2 201 0% 0% 0.0% 0 0 0% V: 8.5 208 0% 0% 0.0% 0 0 0% Exiting... (Quit) --(gabucino@krumpli)-(27/pts)-(Gabucino rulez!)-- --($:~)-- ls -l .mplayer/DVDKeys/ total 28 drwxr-xr-x 2 gabucino root 4096 Nov 12 17:47 ??v???????X? drwxr-xr-x 2 gabucino root 4096 Nov 12 17:47 ????,????v>??P??+???r??|???I?px drwxr-xr-x 2 gabucino root 4096 Nov 12 17:47 ?(?????W?>????8?#???????B ???|& drwxr-xr-x 2 gabucino root 4096 Nov 12 17:47 'p????u@??,>?m??????R?????$?}??* drwxr-xr-x 2 gabucino root 4096 Nov 12 17:47 0000000000000000 drwxr-xr-x 2 gabucino root 4096 Nov 12 17:47 6???+SLfN?@??D??]z?3?$???v??9Ml drwxr-xr-x 2 gabucino root 4096 Nov 12 17:47 ZU??0??_>|?????>|?????>|?????>| --(gabucino@krumpli)-(29/pts)-(Gabucino rulez!)-- --($:~)-- echo .mplayer/DVDKeys/* .mplayer/DVDKeys/ ŔvÔX .mplayer/DVDKeys/ŐÜ,Ëâšv>ÉP +ĽÂrű|ďČńIpx .mplayer/DVDKeys/(äŕźWÜ>ŕÔđ 8#Ľ Ť˘B Ůö|& .mplayer/DVDKeys/'pĘ¨ěu@Ű,>mýˇéŢR˘Ěšˇ$}˝Ű* .mplayer/DVDKeys/0000000000000000 .mplayer/DVDKeys/6Đ+SLfN@űD ]z3Ę$Ďťv 9Ml .mplayer/DVDKeys/ZUĂ 0˙_>|ůóçĎ>|ůóçĎ>|ůóçĎ>| :) -- Gabucino

2 4

MPlayer for use in a consumer device?
by Stewart Apelzin 31 Dec '02

31 Dec '02

Hello, I'm Stew Apelzin, a Project Manager at Liberate Technologies (http://www.liberate.com) Liberate develops software for operating and navigating television-related products. I am working with a partner on a project where our software would be embedded in a LINUX based, multi-function device. One function of the device is the playing of DVDs. We are exploring how to do DVD navigation. MPlayer looks like a good fit for what we are trying to accomplish. The code is listed as GPL, is there a way that we can adapt it for commercial use? Also, have you done any work toward an embedded solution that would fit in a small memory footprint? Thank you, Stew ______________________________________________ Stewart Apelzin - AsiaPacific Solutions sapelzin(a)liberate.com IM sapelzin Ph. (541) 431-0265 voice & fax Addr. Liberate Technologies 3091 Solomon Loop Eugene, OR 97405

2 1

[PATCH] NetBSD SSE detection support
by Nick Hudson 23 Dec '02

23 Dec '02

I just committed the attached patch to NetBSD/pkgsrc mplayer to enable SSE checking and detection on NetBSD. Please included it in the mplayer tree Thanks, Nick

5 7

[PATCH] VOBSUB/DVDSUB bytecode handling
by Christof Buergi 17 Dec '02

17 Dec '02

Hello there Okay, this one is kind of a beast. It works for me, but I think it needs some thorough testing. And some altering, too, perhaps. What it does, is this: - spudec_process_control is changed, so it handles only one control chain at a time. It is also changed to stop at the end of the package, even if there is no final 0xff. - spudec_decode is changed, so it resets some values, so spudec_process_control knows, that it has a new package. - spudec_heartbeat is changed, so it checks every time, whether the next control chain in the current subtitle package has to be handled, and calls spudec_process_control if so. - spudec_visible and spudec_reset are slightly changed to handle visibility detection more properly. - spudec_handle_t gets 4 extra variables, so the above stuff can be handled properly. Now, those working on the subtitle stuff might have already seen, what I'm up to. If you haven't: The VOBSUB and DVDSUB subtitles contain a bytecode, which describes, how the subtitle is to be displayed. This bytecode is split into several chains with a timecode each. MPlayer, up to now, handles the whole bytecode at once, as soon as it got the complete package. Normally, this is no trouble. On some DVDs however, this doesn't work. In particular, I have two DVDs here, that set the subtitle to "all transparent", just before it is officially stopped. On MPlayer, this means disaster: The subtitle is all transparent all the time, making it just a little bit hard to read. So, what I actually changed, was this: the chains are not executed all at once, but one by one, each as soon as his timecode has been reached. Problems: - It's slower than the original code, of course. It might be to big a solution for the problem. However, we might run into more trouble with the current code, when (if!) DVDs actually make use of the bytecodes potential. - This patch doesn't touch hardware SPU. (Is there any, yet?) - Since spu_handle_t has been changed, any copy in other programs or modules has to be changed as well (IIRC, this only affects subrip.c). Okay, now it's up to you. -- _ ___ http://www.p2501.ch/ / \ |/ /\ /\ /\ | \ | | christof(a)buergi.lugs.ch \ / |\ /--\ / \ / \ | /_ | | I'm breaking for DAUs, too! x Say NO to HTML in mail and news / \

3 5