Update of /cvsroot/mplayer/main/DOCS In directory mail:/var/tmp.root/cvs-serv18356/DOCS Modified Files: codecs.html sound.html Log Message: fixing al3x's 10l's Index: codecs.html =================================================================== RCS file: /cvsroot/mplayer/main/DOCS/codecs.html,v retrieving revision 1.110 retrieving revision 1.111 diff -u -r1.110 -r1.111 --- codecs.html 4 Feb 2003 21:38:31 -0000 1.110 +++ codecs.html 5 Feb 2003 21:22:06 -0000 1.111 @@ -169,7 +169,7 @@ <H4><A NAME="xanim">2.2.1.3 XAnim codecs</A></H4> -<H5>FOREWORD</H5> +<H4>FOREWORD</H4> <P> Be advised that the XAnim binary codecs are packaged with a piece of text claiming to be a legally binding software license which, besides other @@ -178,7 +178,7 @@ action against anyone for codec-related issues. </P> -<H5>INSTALLATION AND USAGE</H5> +<H4>INSTALLATION AND USAGE</H4> <P>MPlayer is capable of employing the XAnim codecs for decoding. Follow the instructions to enable them:</P> @@ -266,7 +266,7 @@ source DivX4 (now DivX5), and the non-ProjectMayo people working on OpenDivX got angry, then started XViD. So both projects have the same origin.</P> -<H5>ADVANTAGES</H5> +<H4>ADVANTAGES</H4> <UL> <LI>open source</LI> @@ -276,7 +276,7 @@ your box while compiling)</LI> </UL> -<H5>DISADVANTAGES</H5> +<H4>DISADVANTAGES</H4> <UL> <LI>currently it does not properly <B>decode</B> all DivX/DivX4 files (no @@ -285,7 +285,7 @@ <LI>under development</LI> </UL> -<H5>INSTALLING XVID CVS</H5> +<H4>INSTALLING XVID CVS</H4> <P>XViD is currently available only from CVS. Here are the download and installation instructions:</P> @@ -325,7 +325,7 @@ QuickTime libraries</B></LI> </UL> -<H5>COMPILING MPLAYER WITH QUICKTIME LIBRARIES SUPPORT</H5> +<H4>COMPILING MPLAYER WITH QUICKTIME LIBRARIES SUPPORT</H4> <P><B>NOTE:</B> currently only 32bit Intel platforms are supported.</P> Index: sound.html =================================================================== RCS file: /cvsroot/mplayer/main/DOCS/sound.html,v retrieving revision 1.73 retrieving revision 1.74 diff -u -r1.73 -r1.74 --- sound.html 4 Feb 2003 21:38:31 -0000 1.73 +++ sound.html 5 Feb 2003 21:22:06 -0000 1.74 @@ -366,7 +366,7 @@ </DL> -<H5><A NAME="af_resample">2.3.2.3.1 Up/Down-sampling</A></H5> +<H4><A NAME="af_resample">2.3.2.3.1 Up/Down-sampling</A></H4> <P>MPlayer fully supports sound up/down-sampling through the <CODE>resample</CODE> filter. It can be used if you @@ -409,7 +409,7 @@ output frequency scaling and linear interpolation.</P> -<H5><A NAME="af_channels">2.3.2.3.2 Changing the number of channels</A></H5> +<H4><A NAME="af_channels">2.3.2.3.2 Changing the number of channels</A></H4> <P>The <CODE>channels</CODE> filter can be used for adding and removing channels, it can also be used for routing or copying channels. It is @@ -455,7 +455,7 @@ channel 0 to channels 0 to 3. Channel 4 and 5 will contain silence.</P> -<H5><A NAME="af_format">2.3.2.3.3 Sample format converter</A></H5> +<H4><A NAME="af_format">2.3.2.3.3 Sample format converter</A></H4> <P>The <CODE>format</CODE> filter converts between different sample formats. It is automatically enabled when needed by the sound card or another filter.</P> @@ -482,7 +482,7 @@ data.</P> -<H5><A NAME="af_delay">2.3.2.3.4 Delay</A></H5> +<H4><A NAME="af_delay">2.3.2.3.4 Delay</A></H4> <P>The <CODE>delay</CODE> filter delays the sound to the loudspeakers such that the sound from the different channels arrives at the listening position @@ -517,7 +517,7 @@ by 0ms and the center channel by 7ms.</P> -<H5><A NAME="af_volume">2.3.2.3.5 Software volume control</A></H5> +<H4><A NAME="af_volume">2.3.2.3.5 Software volume control</A></H4> <P>Software volume control is implemented by the <CODE>volume</CODE> audio filter. Use this filter with caution since @@ -555,7 +555,7 @@ utilized.</P> -<H5><A NAME="af_equalizer">2.3.2.3.6 Equalizer</A></H5> +<H4><A NAME="af_equalizer">2.3.2.3.6 Equalizer</A></H4> <P>The <CODE>equalizer</CODE> filter represents a 10 octave band graphic equalizer, implemented using 10 IIR @@ -598,7 +598,7 @@ canceling it almost completely around 1kHz.</P> -<H5><A NAME="af_panning">2.3.2.3.7 Panning filter</A></H5> +<H4><A NAME="af_panning">2.3.2.3.7 Panning filter</A></H4> <P>Use the <CODE>pan</CODE> filter to mix channels arbitrarily. It is basically a combination of the volume control and the channels filter. There are two @@ -638,7 +638,7 @@ example).</P> -<H5><A NAME="af_sub">2.3.2.3.8 Sub-woofer</A></H5> +<H4><A NAME="af_sub">2.3.2.3.8 Sub-woofer</A></H4> <P>The <CODE>sub</CODE> filter adds a sub woofer channel to the audio stream. The audio data @@ -671,7 +671,7 @@ <P>would add a sub-woofer channel with a cutoff frequency of 100Hz to output channel 4.</P> -<H5><A NAME="af_surround">2.3.2.3.9 Surround-sound decoder</A></H5> +<H4><A NAME="af_surround">2.3.2.3.9 Surround-sound decoder</A></H4> <P>Matrix encoded surround sound can be decoded by the <CODE>surround</CODE> filter. Dolby Surround is @@ -728,7 +728,7 @@ <P>Currently audio plugins cannot be used in MEncoder.</P> -<H5><A NAME="resample">2.3.2.4.1 Up/Downsampling</A></H5> +<H4><A NAME="resample">2.3.2.4.1 Up/Downsampling</A></H4> <P>MPlayer fully supports up/downsampling of the sound. This plugin can be used if you have a fixed frequency sound card or if you are @@ -747,7 +747,7 @@ and cause audio distortion.</P> -<H5><A NAME="surround_decoding">2.3.2.4.2 Surround Sound decoding</A></H5> +<H4><A NAME="surround_decoding">2.3.2.4.2 Surround Sound decoding</A></H4> <P>MPlayer has an audio plugin that can decode matrix encoded surround sound. Dolby Surround is an example of a matrix encoded format. @@ -758,7 +758,7 @@   <CODE>mplayer media.avi -aop list=surround</CODE></P> -<H5><A NAME="format">2.3.2.3.3 Sample format converter</A></H5> +<H4><A NAME="format">2.3.2.3.3 Sample format converter</A></H4> <P>If your sound card driver does not support signed 16bit <CODE>int</CODE> data type, this plugin can @@ -773,7 +773,7 @@ list=format:format=<required output format></CODE></P> -<H5><A NAME="delay">2.3.2.4.4 Delay</A></H5> +<H4><A NAME="delay">2.3.2.4.4 Delay</A></H4> <P>This plugin delays the sound and is intended as an example of how to develop new plugins. It can not be used for anything useful from a users perspective @@ -785,7 +785,7 @@ to make this easier.</P> -<H5><A NAME="volume">2.3.2.4.5 Software volume control</A></H5> +<H4><A NAME="volume">2.3.2.4.5 Software volume control</A></H4> <P>This plugin is a software replacement for the volume control, and can be used on machines with a broken mixer device. It can also be @@ -820,7 +820,7 @@ list=volume:softclip</CODE></P> -<H5><A NAME="extrastereo">2.3.2.4.6 Extrastereo</A></H5> +<H4><A NAME="extrastereo">2.3.2.4.6 Extrastereo</A></H4> <P>This plugin (linearly) increases the difference between left and right channels (like the XMMS extrastereo plugin) which gives some sort of "live" @@ -836,7 +836,7 @@ -1.0, left and right channels will be swapped.</P> -<H5><A NAME="normalizer">2.3.2.4.7 Volume normalizer</A></H5> +<H4><A NAME="normalizer">2.3.2.4.7 Volume normalizer</A></H4> <P>This plugin maximizes the volume without distorting the sound.</P>