May 2006 - MPlayer-advusers - lists.mplayerhq.hu

[BUG] ao_alsa changes samplerate after volume change
by Diego Biurrun 04 Sep '06

04 Sep '06

Hi! When I play the following sample http://www.mplayerhq.hu/MPlayer/samples/mov/qtaudio/surge-2-32-B-in32.mov I get a most peculiar effect: If I press 9/0 to change the volume the sample is suddenly played at what appears to be double speed. The problem goes away if I pass -ao oss on the command line. mplayer -v output below. Clemens, could you look into this? Sorry if you are receiving this message multiple times, I don't know which one your preferred email address is. BTW, subscribing to this list is a good idea. It's low volume. Diego MPlayer dev-CVS-060123-03:01-4.0.3 (C) 2000-2006 MPlayer Team get_path('codecs.conf') -> '/home/diego/.mplayer/codecs.conf' Using built-in default codecs.conf. CommandLine: '-v' '/home/diego/samples/MOV/qtaudio/surge-2-32-B-in32.mov' init_freetype Using Unoptimized OnScreenDisplay Using nanosleep() timing get_path('input.conf') -> '/home/diego/.mplayer/input.conf' Falling back on default (hardcoded) input config get_path('surge-2-32-B-in32.mov.conf') -> '/home/diego/.mplayer/surge-2-32-B-in32.mov.conf' Playing /home/diego/samples/MOV/qtaudio/surge-2-32-B-in32.mov. get_path('sub/') -> '/home/diego/.mplayer/sub/' [file] File size is 4627301 bytes STREAM: [file] /home/diego/samples/MOV/qtaudio/surge-2-32-B-in32.mov STREAM: Description: File STREAM: Author: Albeu STREAM: Comment: based on the code from ??? (probably Arpi) Checking for YUV4MPEG2 ASF_check: not ASF guid! Checking for NuppelVideo Checking for REAL Checking for SMJPEG Searching demuxer type for filename /home/diego/samples/MOV/qtaudio/surge-2-32-B-in32.mov ext: .mov Trying demuxer 7 based on filename extension Checking for MOV MOV: 'WIDE' chunk found! MOV: Movie DATA found! MOV: Movie DATA found! MOV: Movie header found! Quicktime/MOV file format detected. MOV: Movie header (100 bytes): tscale=600 dur=7868 -------------- MOV: Track #0: MOV: Track header! tkhd len=84 ver=0 flags=0x0 id=1 dur=7868 lay=0 vol=256 MOV: Edit atom! MOV: Edit list table (1 entries) (ver:0,flags:0) MOV: entry#0: duration: 7868 start time: 0 speed: 1.0x MOV: Media stream! MOV: Media header! MOV: Handler header: rlhm/nuos (lppa) Apple Sound Media Handler MOV: Media info! MOV: Sound header! MOV: Handler header: rlhd/sila (lppa) Apple Alias Data Handler MOV: unknown chunk: dinf 28 MOV: Sample info! MOV: Description list! (cnt:1) MOV: desc #0: 23ni (82 bytes) MOV: Sample duration table! (1 blocks) MOV: Sample->Chunk mapping table! (2 blocks) (ver:0,flags:0) MOV: Sample size table! (entries=578298 ss=1) (ver:0,flags:0) MOV: Chunk offset table! (53 chunks) MOV track #0: 53 chunks, 0 samples pts=578298 scale=44100 time=13.113 ==> Found audio stream: 0 Audio bits: 16 chans: 2 rate: 44100 Audio header: samp/pack=1 bytes/pack=4 bytes/frame=8 bytes/samp=2 Audio extra header: len=46 fcc=0x77617665 MOV: Found unknown audio atom Fourcc: 23ni -------------- MOV: longest streams: A: #0 (53 samples) V: #-1 (0 samples) ========================================================================== Opening audio decoder: [pcm] Uncompressed PCM audio decoder dec_audio: Allocating 2048 + 65536 = 67584 bytes for output buffer. AUDIO: 44100 Hz, 2 ch, s32be, 2822.4 kbit/100.00% (ratio: 352800->352800) Selected audio codec: [pcm] afm: pcm (Uncompressed PCM) ========================================================================== Building audio filter chain for 44100Hz/2ch/s32be -> 0Hz/0ch/s8... [libaf] Adding filter dummy [dummy] Was reinitialized: 44100Hz/2ch/s32be [dummy] Was reinitialized: 44100Hz/2ch/s32be alsa-init: requested format: 44100 Hz, 2 channels, 18 alsa-init: using ALSA 1.0.10 alsa-init: setup for 1/2 channel(s) alsa-init: using device default alsa-init: pcm opend in blocking mode alsa-init: chunksize set to 1024 alsa-init: fragcount=8 alsa-init: got buffersize=65536 alsa-init: got period size 1024 alsa: 44100 Hz/2 channels/8 bpf/65536 bytes buffer/Signed 32 bit Big Endian AO: [alsa] 44100Hz 2ch s32be (4 bytes per sample) AO: Description: ALSA-0.9.x-1.x audio output AO: Author: Alex Beregszaszi, Zsolt Barat <joy(a)streamminister.de> AO: Comment: under developement Building audio filter chain for 44100Hz/2ch/s32be -> 44100Hz/2ch/s32be... [dummy] Was reinitialized: 44100Hz/2ch/s32be [dummy] Was reinitialized: 44100Hz/2ch/s32be Video: no video Freeing 0 unused video chunks. Starting playback... [Mixer] No hardware mixing, inserting volume filter. [libaf] Adding filter volume [libaf] Adding filter format [format] Changing sample format from big-endian 32-bit signed int to big-endian 16-bit signed int [dummy] Was reinitialized: 44100Hz/2ch/s16be [libaf] Reallocating memory in module format, old len = 0, new len = 8200 Uninit audio filters... [libaf] Removing filter format [libaf] Removing filter volume [libaf] Removing filter dummy uninit audio: pcm alsa-uninit: pcm closed vo: x11 uninit called but X11 not inited.. Exiting... (Quit)

2 4

flac in ogm file
by compn 31 May '06

31 May '06

user uploaded a flac in ogm file. only works with -demuxer 35 -ac +ffflac sample is in ftp://www.mplayerhq.hu/MPlayer/incoming/01_-_dungeon.ogg mplayer 01_-_dungeon.ogg causes a segfault for me. i dont know if Moritz is still dev/maintainer, so i cc this mail to him. -compn

1 0

CVS mplayer and segmentation fault with liba52
by lynx.abraxas＠freenet.de 28 May '06

28 May '06

Hallo! Since at least about a month CVS mplayer is not able to play DVDs with sound on my system anymore (CVS of last few days doesn't compile through at the moment). It seems that there is a problem in liba52. If I use: mplayer dvd:// mplayer dvd:// -ao oss it crashes with: MPlayer interrupted by signal 11 in module: decode_audio If I use: mplayer dvd:// -ac -a52, it doesn't crash but sounds terrible because it uses: Selected audio codec: [hwac3] afm: hwac3 (AC3 through S/PDIF) Using: strace /usr/src/mplayer/main/mplayer dvd:// yields: write(1, "Starting playback...\n", 21Starting playback... ) = 21 gettimeofday({1147720732, 914018}, {4294967176, 0}) = 0 gettimeofday({1147720732, 915374}, {4294967176, 0}) = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- write(2, "\n\nMPlayer interrupted by signal "..., 59 MPlayer interrupted by signal 11 in module: decode_audio ) = 59 I have a LFS 2.6.16.11 and liba52 installed separately as well (see bottom for full info). Using --disable-liba52 with configure disables it totally so I found no way to test it with my separat library. I hope it is not some dependency problem through my LFS; configure has no complains. I had (or still have when not using --disable-internal-tremor) problems with libvorbis as well. I talked with Diego about that already. I would love to have the screenshot option with DVDs if possible, so any help apreciated. Tell me if more info is needed. Thanks Lynx On 26/03/06 13:41:38, Diego Biurrun wrote: > On Sun, Mar 26, 2006 at 01:28:50PM +0200, RHG wrote: > > > > > > Die Sache mit -autiofile foo.ogg ist nun gerichtet. Es scheint aber nötig zu > > > > sein --disable-internal-tremor beim Kompilieren mit anzugeben, zumindes wenn > > > > man libvorbis separat installiert hat. Das sollte, falls von mir richtig > > > > erkannt, in die Doku mit aufgenommen werden beim Abschnitt Vorbis. > > > > > > Aehh, nein. Tremor ist ein Vorbis-Decoder und viel schneller als > > > libvorbis. > > > > Ist libvorbis nicht im System, so scheint es zu funktionieren, > > zumindest bei Reimar Döffinger, der sich meinem Problem angenommen > > hat. Bei mir funzt es nur, wenn ich --disable-internal-tremor angebe, > > und ich brauch meine libvorbis. > > Ohne genauen Bugreport laesst sich da nichts sagen, sieht aber nach > einem libvorbis Problem aus. Schalte libvorbis doch einfach ab: > > configure --disable-vorbis > > > > > (Mein cvs mplayer kann leider keine DVDs mehr abspielen, aber ich denke mal, > > > > dass das bekannt ist und nur vorrübergehen der Fall ist. ) > > > > > > Ist nicht bekannt und funktioniert bei mir problemlos... > > mplayer -fs dvd:// -v -v > > oder > > mplayer -fs dvd:// -v -v -ao null > > > > ========================================================================== > > Building audio filter chain for 48000Hz/2ch/s16le -> 0Hz/0ch/??... > > [libaf] Adding filter dummy > > [dummy] Was reinitialized: 48000Hz/2ch/s16le > > [dummy] Was reinitialized: 48000Hz/2ch/s16le > > AO: [null] 48000Hz 2ch s16le (2 bytes per sample) > > AO: Description: Null audio output > > AO: Author: Tobias Diedrich <ranma+mplayer(a)tdiedrich.de> > > Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le... > > [dummy] Was reinitialized: 48000Hz/2ch/s16le > > [dummy] Was reinitialized: 48000Hz/2ch/s16le > > Starting playback... > > > > decaudio: minlen=65536 maxlen=65536 declen=65536 (max=71680) > > decaudio: decoding 65536 bytes, max: 71680 (6144) > > > > MPlayer interrupted by signal 11 in module: decode_audio > > Schick mal einen Bugreport and mplayer-users oder mplayer-advusers... > > Diego ls -l /lib/libc[.-]* -rwxr-xr-x 1 root root 1455324 2004-10-03 12:41 /lib/libc-2.3.3.so lrwxrwxrwx 1 root root 13 2004-09-30 08:43 /lib/libc.so.6 -> libc-2.3.3.so gcc -v Using built-in specs. Target: i686-pc-linux-gnu Configured with: ../gcc-4.0.2/configure --prefix=/usr --libexecdir=/usr/lib --enable- shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu --enable- languages=c,c++,f95 Thread model: posix gcc version 4.0.2 ld -v GNU ld version 2.14 20030612 as --version GNU assembler 2.14 20030612 Copyright 2002 Free Software Foundation, Inc. This program is free software; you may redistribute it under the terms of the GNU General Public License. This program has absolutely no warranty. This assembler was configured for a target of `i686-pc-linux-gnu'. cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.40GHz stepping : 7 cpu MHz : 2390.544 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid bogomips : 4787.42 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)

3 4

segfault while encoding with libdv
by Dominik 'Rathann' Mierzejewski 17 May '06

17 May '06

Recompiling libpostproc with -O0 instead of -O2 makes the crash go away. :( $ cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 47 model name : AMD Sempron(tm) Processor 3000+ stepping : 2 cpu MHz : 1800.000 cache size : 128 KB fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm bogomips : 3622.65 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc Running Fedora Core 5 64bit kernel-2.6.16-1.2111_FC5.x86_64 glibc-2.4-8.x86_64 libdv-0.104-2.fc5.x86_64 ./configure --enable-debug=3 --prefix=/usr --bindir=/usr/bin --libdir=/usr/lib64 --with-x11libdir=/usr/lib64 --datadir=/usr/share/mplayer --mandir=/usr/share/man --confdir=/etc/mplayer --language=all --disable-codec=mp3lame --enable-largefiles --disable-aa --disable-arts --disable-caca --disable-cdparanoia --disable-dga --disable-directfb --disable-divx4linux --disable-dshow --disable-dvb --disable-dvbhead --disable-dxr3 --disable-enca --disable-esd --disable-faac --disable-internal-faad --disable-fribidi --disable-ggi --disable-jack --disable-joystick --disable-ladspa --disable-lirc --disable-mad --enable-menu --disable-openal --disable-polyp --disable-qtx --disable-sdl --disable-smb --disable-speex --disable-svga --disable-toolame --disable-twolame --disable-vm --disable-internal-tremor --disable-win32 --disable-x264 --disable-theora --disable-libdts --disable-directfb --disable-xvid --disable-gl --disable-internal-vidix $ cat batch run -v -ovc libdv -ffourcc DVSD -vf scale -oac pcm -o test.avi -dvd-device /dev/hdc dvd:// -noautoexpand bt disass $pc-32 $pc+32 info all-registers $ gdb --batch --command=batch ./mencoder Using host libthread_db library "/lib64/libthread_db.so.1". [Thread debugging using libthread_db enabled] [New Thread 46912502348496 (LWP 28311)] MEncoder dev-Fedora-GS-CVS-060517-22:47-4.1.0 (C) 2000-2006 MPlayer Team CPU: Advanced Micro Devices Athlon 64 Newcastle,Winchester,San Diego,Venice; Sempron Palermo (Family: 15, Stepping: 2) CPUflags: Type: 15 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1 Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2 init_freetype get_path('font/font.desc') -> '/home/dominik/.mplayer/font/font.desc' font: can't open file: /home/dominik/.mplayer/font/font.desc font: can't open file: /usr/share/mplayer/font/font.desc Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay URL: dvd:// Reading disc structure, please wait... There are 1 titles on this DVD. There are 6 chapters in this DVD title. There are 1 angles in this DVD title. DVD successfully opened. [open] audio stream: 0 audio format: ac3 (stereo) language: unknown aid: 128 [open] number of audio channels on disk: 1. [open] number of subtitles on disk: 0 DVD start cell: 0 pack: 0x0-0x27A6 DVD start=0 end=1100461 STREAM: [null] dvd:// STREAM: Description: DVD stream STREAM: Author: STREAM: Comment: success: format: 0 data: 0x0 - 0x86556800 DVD Seek! lba=0x0 cell=0 packs: 0x0-0x27A6 Angle-seek synced by cell/vob IDN search! Checking for YUV4MPEG2 ASF_check: not ASF guid! Checking for NuppelVideo Checking for REAL Checking for SMJPEG Searching demuxer type for filename dvd:// ext: (null) DVD Seek! lba=0x0 cell=0 packs: 0x0-0x27A6 Angle-seek synced by cell/vob IDN search! Checking for Nullsoft Streaming Video DVD Seek! lba=0x0 cell=0 packs: 0x0-0x27A6 Angle-seek synced by cell/vob IDN search! Checking for MOV Checking for VIVO header block 1 size: 0 Checking for PVA Checking for MPEG-TS... TRIED UP TO POSITION 69581, FOUND 47, packet_size= 0, SEEMS A TS? 0 DVD Seek! lba=0x21 cell=0 packs: 0x0-0x27A6 Angle-seek synced by cell/vob IDN search! DVD Seek! lba=0x0 cell=0 packs: 0x0-0x27A6 Angle-seek synced by cell/vob IDN search! Checking for LMLM4 Stream Format Invalid packet in LMLM4 stream: ch=0 size=1140851708 LMLM4 Stream Format not found system stream synced at 0xD (13)! ==> Found video stream: 0 DVD Seek! lba=0x864DC cell=54 packs: 0x85D8B-0x88533 Angle-seek synced by cell/vob IDN search! DVD Seek! lba=0x10C9B8 cell=108 packs: 0x10BB3F-0x10CAAD stream_seek: WARNING! Can't seek to 0x864DC6E0 ! DVD Seek! lba=0x0 cell=0 packs: 0x0-0x27A6 Angle-seek synced by cell/vob IDN search! MPEG-PS file format detected. ==> Found audio stream: 128 Searching for sequence header... OK! VIDEO: MPEG2 720x576 (aspect 2) 25.000 fps 9200.0 kbps (1150.0 kbyte/s) [V] filefmt:2 fourcc:0x10000002 size:720x576 fps:25.00 ftime:=0.0400 ========================================================================== Opening audio decoder: [liba52] AC3 decoding with liba52 dec_audio: Allocating 3840 bytes for input buffer. dec_audio: Allocating 6144 + 65536 = 71680 bytes for output buffer. AC3: 2.0 (stereo) 48000 Hz 256.0 kbit/s A52 flags before a52_frame: 0x2A A52 flags after a52_frame: 0x2 AUDIO: 48000 Hz, 2 ch, s16le, 256.0 kbit/16.67% (ratio: 32000->192000) Selected audio codec: [a52] afm: liba52 (AC3-liba52) ========================================================================== Opening video filter: [scale] SwScale params: -1 x -1 (-1=no scaling) ========================================================================== Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough VDec: vo config request - 720 x 576 (preferred colorspace: Mpeg PES) Trying filter chain: scale libdv VDecoder init failed :( Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b Selected video codec: [mpeg12] vfm: libmpeg2 (MPEG-1 or 2 (libmpeg2)) ========================================================================== Forcing output FourCC to 44535644 [DVSD]. Building audio filter chain for 48000Hz/2ch/s16le -> 0Hz/0ch/??... [libaf] Adding filter dummy [dummy] Was reinitialized: 48000Hz/2ch/s16le [dummy] Was reinitialized: 48000Hz/2ch/s16le Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le... [dummy] Was reinitialized: 48000Hz/2ch/s16le [dummy] Was reinitialized: 48000Hz/2ch/s16le VDec: vo config request - 720 x 576 (preferred colorspace: Planar YV12) Trying filter chain: scale libdv VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is 1.33:1 - prescaling to correct movie aspect. VO Config (720x576->768x576,flags=0,'MPlayer',0x32315659) SwScaler: reducing / aligning filtersize 1 -> 4 SwScaler: reducing / aligning filtersize 1 -> 4 SwScaler: reducing / aligning filtersize 1 -> 1 SwScaler: reducing / aligning filtersize 5 -> 4 SwScaler: BICUBIC scaler, from Planar YV12 to Packed YUY2 using MMX2 SwScaler: using 4-tap MMX scaler for horizontal luminance scaling SwScaler: using 4-tap MMX scaler for horizontal chrominance scaling SwScaler: using n-tap MMX scaler for vertical scaling (BGR) SwScaler: 720x576 -> 720x576 REQ: flags=0x3 req=0x0 *** [scale] Allocating mp_image_t, 720x576x12bpp YUV planar, 622080 bytes Pos: 0.0s 1f ( 0%) 0fps Trem: 0min 0mb A-V:0.000 [0:0] A/Vms 2/4 D/B/S 0/1/0 *** [scale] Allocating mp_image_t, 720x576x12bpp YUV planar, 622080 bytes Muxer frame buffer sending 2 frame(s) to the muxer. Writing header... ODML: vprp aspect is 4:3. Writing header... ODML: vprp aspect is 4:3. Pos: 0.0s 2f ( 0%) 0fps Trem: 0min 0mb A-V:0.004 [0:0] A/Vms 2/4 D/B/S 1/2/0 *** [libdv] Allocating mp_image_t, 720x576x16bpp YUV packed, 829440 bytes Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 46912502348496 (LWP 28311)] 0x00000000005157ca in swScale_MMX2 (c=0xbf6840, src=0xc03b20, srcStride=0x7fffffe67e40, srcSliceY=0, srcSliceH=576, dst=0xc1c440, dstStride=0x7fffffe67e50) at swscale_template.c:952 952 asm volatile( #0 0x00000000005157ca in swScale_MMX2 (c=0xbf6840, src=0xc03b20, srcStride=0x7fffffe67e40, srcSliceY=0, srcSliceH=576, dst=0xc1c440, dstStride=0x7fffffe67e50) at swscale_template.c:952 #1 0x000000000050ccf0 in sws_scale_ordered (c=) at swscale.c:2313 #2 0x00000000004620f8 in scale (sws1=) at vf_scale.c:310 #3 0x00000000004621fb in put_image (vf=0xc5dbe0, mpi=0xc03b00, pts=-9.2233720368547758e+18) at vf_scale.c:338 #4 0x000000000043ada8 in decode_video (sh_video=0xbf59d0, start=) at dec_video.c:338 #5 0x000000000040a982 in main (argc=) at mencoder.c:1323 Dump of assembler code from 0x5157aa to 0x5157ea: 0x00000000005157aa <swScale_MMX2+13194>: jno 0x515790 <swScale_MMX2+13168> 0x00000000005157ac <swScale_MMX2+13196>: add (%rdi),%ecx 0x00000000005157ae <swScale_MMX2+13198>: jno 0x515791 <swScale_MMX2+13169> 0x00000000005157b0 <swScale_MMX2+13200>: add (%rdi),%ecx 0x00000000005157b2 <swScale_MMX2+13202>: jno 0x51579b <swScale_MMX2+13179> 0x00000000005157b4 <swScale_MMX2+13204>: add (%rdi),%ecx 0x00000000005157b6 <swScale_MMX2+13206>: addr32 fisttpl (%edi) 0x00000000005157b9 <swScale_MMX2+13209>: addr32 in $0xf,%al 0x00000000005157bc <swScale_MMX2+13212>: addr32 iret 0x00000000005157be <swScale_MMX2+13214>: punpcklbw %mm4,%mm3 0x00000000005157c1 <swScale_MMX2+13217>: movq %mm1,%mm7 0x00000000005157c4 <swScale_MMX2+13220>: punpcklbw %mm3,%mm1 0x00000000005157c7 <swScale_MMX2+13223>: punpckhbw %mm3,%mm7 0x00000000005157ca <swScale_MMX2+13226>: movntq %mm1,(%r10,%rax,2) 0x00000000005157cf <swScale_MMX2+13231>: movntq %mm7,0x8(%r10,%rax,2) 0x00000000005157d5 <swScale_MMX2+13237>: add $0x8,%rax 0x00000000005157d9 <swScale_MMX2+13241>: cmp 0x348(%rsp),%rax 0x00000000005157e1 <swScale_MMX2+13249>: jb 0x515721 <swScale_MMX2+13057> 0x00000000005157e7 <swScale_MMX2+13255>: jmpq 0x513b88 <swScale_MMX2+5992> End of assembler dump. rax 0x65fe0 417760 rbx 0xbf61c8 12542408 rcx 0xbf9550 12555600 rdx 0xbf95b8 12555704 rsi 0x0 0 rdi 0x20 32 rbp 0xbf67f8 0xbf67f8 rsp 0x7fffffe67a60 0x7fffffe67a60 r8 0xfffffffffffffd30 -720 r9 0xbfa5a8 12559784 r10 0x2aaaaed12040 46912565747776 r11 0x4 4 r12 0xbf6840 12544064 r13 0x0 0 r14 0xbf6908 12544264 r15 0x2d0 720 rip 0x5157ca 0x5157ca <swScale_MMX2+13226> eflags 0x210246 2163270 cs 0x33 51 ss 0x2b 43 ds 0x0 0 es 0x0 0 fs 0x0 0 gs 0x0 0 st0 -nan(0xffc0ffc0ffc0ffc) (raw 0xffff0ffc0ffc0ffc0ffc) st1 -nan(0x7c00ea009c007700) (raw 0xffff7c00ea009c007700) st2 -nan(0xfde0fac8fd60f851) (raw 0xfffffde0fac8fd60f851) st3 -nan(0xffca7cea9c77) (raw 0xffff0000ffca7cea9c77) st4 -nan(0xff7c9c00ff7c9c) (raw 0xffff00ff7c9c00ff7c9c) st5 -nan(0xfb710635f83200a8) (raw 0xfffffb710635f83200a8) st6 -nan(0x2000200020002) (raw 0xffff0002000200020002) st7 -nan(0xc7ff00ca15) (raw 0xffff000000c7ff00ca15) fctrl 0x37f 895 fstat 0x0 0 ftag 0xaaaa 43690 fiseg 0x0 0 fioff 0x0 0 foseg 0x0 0 fooff 0x0 0 fop 0x0 0 xmm0 {f = {0x0, 0xfffffe40, 0x0, 0x0}} {f = {0, -448, 0, 0}} xmm1 {f = {0xfffffffe, 0x0, 0x0, 0x0}} {f = {-2, 0.938999951, 0, 0}} xmm2 {f = {0x0, 0x0, 0x0, 0x0}} {f = {0.0799999982, 0, 0, 0}} xmm3 {f = {0x2, 0x1, 0x0, 0x0}} {f = {2, 1.28499997, 0, 0}} xmm4 {f = {0xfffffffe, 0x0, 0x0, 0x0}} {f = {-2, 0, 0, 0}} xmm5 {f = {0x0, 0x0, 0x0, 0x0}} {f = {0.0017241796, -1.25371134e-05, 0.00118732243, 0.00125386752}} xmm6 {f = {0x1, 0xffffffff, 0x0, 0x0}} {f = {1, -1, 0.707106769, -0.707106769}} xmm7 {f = {0x0, 0x0, 0x0, 0x0}} {f = {0, 0, 0.707106769, -0.707106769}} xmm8 {f = {0x0, 0x0, 0x0, 0x0}} {f = {2.87766611e-09, 0.0133291213, 0, 0}} xmm9 {f = {0x0, 0x1, 0x0, 0x0}} {f = {-2.83574902e+25, 1.92180574, 0, 0}} xmm10 {f = {0x0, 0x1, 0x0, 0x0}} {f = {0, 1.75, 0, 0}} xmm11 {f = {0x53500000, 0x1, 0x0, 0x0}} {f = {1.46601211e+13, 1.29166663, 0, 0}} xmm12 {f = {0x0, 0x1, 0x0, 0x0}} {f = {-3.20229453e+24, 1.00833321, 0, 0}} xmm13 {f = {0x51500000, 0x1, 0x0, 0x0}} {f = {1.46600876e+13, 1.54166663, 0, 0}} xmm14 {f = {0x0, 0x0, 0x0, 0x0}} {f = {0, 0, 0, 0}} xmm15 {f = {0x0, 0x1, 0x0, 0x0}} {f = {0, 1.875, 0, 0}} mxcsr 0x1fa0 8096 -- MPlayer developer and RPMs maintainer: http://rpm.greysector.net/mplayer/ There should be a science of discontent. People need hard times and oppression to develop psychic muscles. -- from "Collected Sayings of Muad'Dib" by the Princess Irulan

1 0

[BUGREPORT] Mencoder floating point exception...
by RC 14 May '06

14 May '06

This is a strange one... When using -ovc vfw with ANY source and ANY output codec, I get an immediate floating point exception. Exact same result when compiled with gcc-2.95.3 or gcc-3.3.6. The strangest thing is, it worked perfectly on this exact machine, using Slackware 10.0, until I wiped the drive and installed Slackware 10.2... Stock kernel, seemingly perfectly normal system, with practically no other problems with mplayer/mencoder to speak-of. Why oh why do MPlayer bugs love me so?

3 10

h264/aac in mkv issue? video stops because delay=0
by Attila Kinali 10 May '06

10 May '06

Moin, I just uploaded a file to incomming: video_stops_due_to_delay=0.mkv (incl .txt) It shows a quite strange behaviour which i think is due to a bug in the mkv demuxer when it contains a h.264 or aac. In this file, delay becomes for some reason 0. MPlayer starts to spin in a loop around a sleep waiting for the time to advance due to that. Interestingly other files with h.264+aac don't show this behaviour. Only ergo proxy eps from 2 and above from shinsen sub (ie, ep1 is fine). The bug has to be quite old as even the oldest MPlayer compile i have at hand from 2005-11-19 shows the same behaviour. Attila Kinali -- 心をこめて聞け心をこめて話せ

2 2

Re: mplayer hangs during rtsp play from BBC
by jim 10 May '06

10 May '06

Fortunately I have solved the problem I was having. The problem was network and not mplayer. The firewall in my belkin router was stopping the stream after a period of time. It also would halt the stream in RealPlayer. I moved my box to the outside of the firewall and all is again working correctly. This started after switching to a Netopia bridge modem. I record all of BBC7 listen again schedule each night so I can have mp3s for the linksys radio. I love mplayer because I can start simultaneous sessions and download >20 streams and still be inside the bandwidth of my DSL. When the longest show is done playing I start my wave-to-mp3 script. About 2 hours later I have all of the shows on my media server in mp3. Thanks, Jim

2 1

Fwd: mplayer hangs during rtsp play from BBC
by Guillaume POIRIER 08 May '06

08 May '06

the following msg was sent to me though the -owner redirection... ---------- Forwarded message ---------- From: jim <jim(a)meyerpottery.com> Date: May 8, 2006 3:25 PM Subject: mplayer hangs during rtsp play from BBC To: mplayer-advusers-owner(a)mplayerhq.hu Starting Tuesday this week my mplayer hangs after 3 to 15 minutes of an rtsp stream play or dump from BBC7. I have re-compiled from CVS with the same results. These streams play in Helix player without pause. The only thing I know that changed on Tuesday is a new ISP(nts-online) and dsl modem (netopia 3341B). If I set cache to 99% the stream is loaded into cache but the decaudio still hangs. Here is how my screen is left with -v -v options: decaudio: minlen=65536 maxlen=262144 declen=65536 (max=257536) decaudio: decoding 65536 bytes, max: 257536 (192000) decaudio: declen=65536 out=65536 (max 262144) A: 895.0 (14:54.9) of 2222.0 (37:02.0) 96.8% 0% decaudio: minlen=65536 maxlen=262144 declen=65536 (max=257536) decaudio: decoding 65536 bytes, max: 257536 (192000) decaudio: declen=65536 out=65536 (max 262144) A: 895.4 (14:55.3) of 2222.0 (37:02.0) 96.8% 0% decaudio: minlen=65536 maxlen=262144 declen=65536 (max=257536) decaudio: decoding 65536 bytes, max: 257536 (192000) Then after control c: MPlayer interrupted by signal 2 in module: decode_audio *** uninit(0x6CA) MPlayer interrupted by signal 2 in module: enable_cache *** uninit(0xC8) [[[uninit getch2]]] Uninit audio filters... [libaf] Removing filter dummy Uninit audio: ffmpeg DEMUXER: freeing demuxer at 0x880ba28 DEMUXER: freeing sh_audio at 0x880c298 [[[uninit getch2]]] vo: x11 uninit called but X11 not inited.. max framesize was 0 bytes jim@jimsws:~/mplayercvs/main $ My command line: jim@jimsws:~/mplayercvs/main $ ./mplayer rtsp://rmv8.bbc.net.uk/bbc7/1800_thu.ra?start="00:00"\&end="34:00" -ao pcm:fast:file='test.wav' -vc null -vo null -v -v If anyone has had this problem please let me know. I have been recording from BBC since Dec 05 with no problems. Jim -- I am disillusioned enough to know that no man's opinion on any subject is worth a damn unless backed up with enough genuine information to make him really know what he's talking about. -- H. P. Lovecraft (about the flamewars on FFmpeg and MPlayer-dev mailing lists) http://www.brainyquote.com/quotes/quotes/h/hplovecr278144.html

1 0

[BUG] mencoder -vf expand doesn't "reset" black bars when changing input files
by Corey Hickey 08 May '06

08 May '06

Hello, When using -vf expand to match up the resolutions of multiple input files for encoding together, I ran into a bug: the last frame of the first input file "sticks" in the black bars of the second input file. It's very easy to reproduce; no need to even download any input files -- just use your friendly neighborhood random device. ;) mencoder -vf expand=240:240 -demuxer rawvideo -ovc lavc -o bars.avi \ /dev/urandom -rawvideo w=240:h=120:fps=24 -frames 48 \ /dev/urandom -rawvideo w=120:h=240:fps=24 -frames 48 mplayer bars.avi I had a look around, but I can't see what's causing this. Thanks, Corey

1 0

-fixed-vo not working as expected ?
by Pierre Lombard 07 May '06

07 May '06

Hi, If I do a : mplayer -vo xv -fixed-vo foo1.avi foo2.avi (with foo1.avi =foo2.avi) it always destroys the window at the end of foo1.avi and recreate a new one to play foo2.avi, which it should not do if I read correctly. The same behavior occurs with -vo x11 Attached is a log file resulting from: mplayer -vo x11 -fixed-vo x.avi x.avi -- Pierre Lombard GPG: 0x1AF0803C

1 0