February 2004 - MPlayer-advusers

[BUG?] MEncoder/lavc assertion failed in ratecontrol.c:587
by Dominik 'Rathann' Mierzejewski 08 Aug '04

08 Aug '04

Hello. I'm trying to encode the 2001: A Space Odyssey DVD to mpeg4 using lavc on to 2 CDs, preserving original audio stream. Unfortunately, mencoder seems to be unable to complete the second pass, the assertion libavcodec/ratecontrol.c:587: [...] if(s->flags&CODEC_FLAG_PASS2){ assert(picture_number>=0); assert(picture_number<rcc->num_entries); ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ rce= &rcc->entry[picture_number]; wanted_bits= rce->expected_bits; }else{ rce= &local_rce; wanted_bits= (uint64_t)(s->bit_rate*(double)picture_number/fps); } [...] always fails on the last frame. Even stranger, this happens only if I encode chapters 1-16 or 1-17. If I encode only chapter 16 or 17, all is fine. I've tried MEncoder-CVS 2003/11/30 and 2003/12/02 (with the same libavcodec versions), both exhibit the same behaviour $ mplayer -identify -frames 0 dvd://1 MPlayer dev-RPM-CVS-031202-20:02-3.2.2 (C) 2000-2003 MPlayer Team CPU: Advanced Micro Devices Athlon Thunderbird 1173 MHz (Family: 6, Stepping: 2) Detected cache-line size is 64 bytes CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0 Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx Reading config file /etc/mplayer/mplayer.conf Reading config file /home/dominik/.mplayer/config Reading /home/dominik/.mplayer/codecs.conf: 60 audio & 151 video codecs font: can't open file: /home/dominik/.mplayer/font/font.desc font: can't open file: /usr/share/mplayer/font/font.desc Using Linux hardware RTC timing (1024Hz). Can't open input config file /home/dominik/.mplayer/input.conf: Nie ma takiego pliku ani katalogu Input config file /etc/mplayer/input.conf parsed: 53 binds Playing dvd://1. libdvdread: Couldn't find device name. Reading disc structure, please wait... There are 3 titles on this DVD. There are 32 chapters in this DVD title. There are 1 angles in this DVD title. DVD successfully opened. Selected DVD audio channel: 128 language: en Cache fill: 19,24% (1613824 bytes) MPEG-PS file format detected. VIDEO: MPEG2 720x576 (aspect 3) 25,000 fps 7500,0 kbps (937,5 kbyte/s) ========================================================================== Opening audio decoder: [liba52] AC3 decoding with liba52 Using 3DNowEx optimized IMDCT transform AC3: 5.1 (3f+2r+lfe) 48000 Hz 384,0 kbit/s Using MMX optimized resampler AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 48000->192000 (384,0 kbit) Selected audio codec: [a52] afm:liba52 (AC3-liba52) ========================================================================== ID_FILENAME=dvd://1 ID_VIDEO_FORMAT=0x10000002 ID_VIDEO_BITRATE=7500000 ID_VIDEO_WIDTH=720 ID_VIDEO_HEIGHT=576 ID_VIDEO_FPS=25,000 ID_VIDEO_ASPECT=1,7778 ID_AUDIO_CODEC=a52 ID_AUDIO_FORMAT=8192 ID_AUDIO_BITRATE=384000 ID_AUDIO_RATE=48000 ID_AUDIO_NCH=2 ID_LENGTH=7217 vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0" => local display) Disabling DPMS ========================================================================== Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.3.1 Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2)) ========================================================================== Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit... AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian) AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps) Building audio filter chain for 48000Hz/2ch/16bit -> 44100Hz/2ch/16bit... Starting playback... Exiting... (End of file) This: nice mencoder dvd://1 -chapter 1-16 -noaspect -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1032000:vqmin=2:vqmax=12:vqcomp=0.7:keyint=120:psnr:naq:v4mv:vlelim=-2:vcelim=7:lumi_mask=0.05:dark_mask=0.01:trell:mbd=2:mv0:cbp:qpel:precmp=2:cmp=2:subcmp=2:mbcmp=2:vmax_b_frames=1:vqdiff=5:vqblur=0.3:vpass=1 -sws 10 -vf crop=716:472:2:52,scale=640:352 -oac copy -o 2001.part1.avi completes fine, but this doesn't: nice mencoder dvd://1 -chapter 1-16 -noaspect -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1032000:vqmin=2:vqmax=12:vqcomp=0.7:keyint=120:psnr:naq:v4mv:vlelim=-2:vcelim=7:lumi_mask=0.05:dark_mask=0.01:trell:mbd=2:mv0:cbp:qpel:precmp=2:cmp=2:subcmp=2:mbcmp=2:vmax_b_frames=1:vpass=2 -sws 10 -vf crop=716:472:2:52,scale=640:352 -oac copy -o 2001.part1.avi MEncoder dev-RPM-CVS-031202-20:02-3.2.2 (C) 2000-2003 MPlayer Team CPU: Advanced Micro Devices Athlon Thunderbird 1000 MHz (Family: 6, Stepping: 2) Detected cache-line size is 64 bytes CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0 Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx Reading /home/dominik/.mplayer/codecs.conf: 60 audio & 151 video codecs File not found: 'frameno.avi' Failed to open frameno.avi Reading config file /home/dominik/.mplayer/mencoder libdvdread: Couldn't find device name. Reading disc structure, please wait... There are 3 titles on this DVD. There are 32 chapters in this DVD title. There are 1 angles in this DVD title. DVD successfully opened. success: format: 0 data: 0x720000 - 0xC6EB8800 Selected DVD audio channel: 128 language: en MPEG-PS file format detected. VIDEO: MPEG2 720x576 (aspect 3) 25,000 fps 7500,0 kbps (937,5 kbyte/s) [V] filefmt:2 fourcc:0x10000002 size:720x576 fps:25,00 ftime:=0,0400 ========================================================================== Opening audio decoder: [liba52] AC3 decoding with liba52 Using 3DNowEx optimized IMDCT transform AC3: 5.1 (3f+2r+lfe) 48000 Hz 384,0 kbit/s Using MMX optimized resampler AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 48000->192000 (384,0 kbit) Selected audio codec: [a52] afm:liba52 (AC3-liba52) ========================================================================== Opening video filter: [expand osd=1] Expand: -1 x -1, -1 ; -1 (-1=autodetect) osd: 1 Opening video filter: [scale w=640 h=352] Opening video filter: [crop w=716 h=472 x=2 y=52] Crop: 716 x 472, 2 ; 52 ========================================================================== Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.3.1 Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2)) ========================================================================== audiocodec: framecopy (format=2000 chans=2 rate=48000 bits=16 bps=48000 sample=1) Writing AVI header... VDec: vo config request - 720 x 576 (preferred csp: Planar YV12) VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is undefined - no prescaling applied. SwScaler: reducing / aligning filtersize 24 -> 12 SwScaler: reducing / aligning filtersize 24 -> 12 SwScaler: reducing / aligning filtersize 28 -> 13 SwScaler: reducing / aligning filtersize 28 -> 13 SwScaler: Bicubic spline scaler, from Planar YV12 to Planar YV12 using MMX2 videocodec: libavcodec (640x352 fourcc=58564944 [DIVX]) High quality encoding selected (non real time)! Pos: 0,8s 22f ( 0%) 1fps Trem: 0min 0mb A-V:0,084 [0:384] Skipping frame! Pos: 1,7s 44f ( 0%) 2fps Trem: 0min 0mb A-V:0,080 [23:384] Skipping frame! mencoder: ratecontrol.c:587: ff_rate_estimate_qscale: `picture_number<rcc->num_entries' assertion failed. /home/dominik/bin/dvd2divx: line 37: 28260 Interrupted (core dumped) $NICE mencoder $OPTS -ovc lavc -lavcopts $LAVCOPTS:vpass=2 $VOPTS -oac copy -o "$OUT" Sorry for not giving -v output, but I'd have to wait about 12 hours to get it, because I'm encoding over a slow 10Mbit SMB mount. :( Any clues? Additional information: RedHat 7.3 $ uname -a Linux rathann.pekin.net.pl 2.4.23-lm2-lv #8 wto gru 2 04:57:28 CET 2003 i686 unknown $ ls -l /lib/libc[.-]* -rwxr-xr-x 1 root root 1260480 lis 5 18:07 /lib/libc-2.2.5.so lrwxrwxrwx 1 root root 13 lis 16 12:06 /lib/libc.so.6 -> libc-2.2.5.so $ gcc32 -v Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/3.2.2/specs Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --disable-checking --with-system-zlib --enable-__cxa_atexit --host=i386-redhat-linux Thread model: posix gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5) $ ld -v GNU ld version 2.13.90.0.2 20020802 $ as --version GNU assembler 2.13.90.0.2 20020802 $ cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 4 model name : AMD Athlon(tm) processor stepping : 2 cpu MHz : 1000.073 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow bogomips : 1992.29 $ lspci [...] 01:00.0 VGA compatible controller: nVidia Corporation NV10 [GeForce 256 SDR] (rev 10) $ cat /proc/driver/nvidia/version NVRM version: NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16 19:03:09 PDT 2003 $ cat /proc/isapnp Card 1 'CTL0044:Creative SB32 PnP' PnP version 1.0 Product version 1.0 $ grep SB /var/log/dmesg sb: Creative SB32 PnP detected sb: ISAPnP reports 'Creative SB32 PnP' at i/o 0x220, irq 5, dma 1, 5 -- MPlayer RPMs maintainer: http://www.piorunek.pl/~dominik/linux/pkgs/mplayer/ "The Universe doesn't give you any points for doing things that are easy." -- Sheridan to Garibaldi in Babylon 5:"The Geometry of Shadows"

3 2

MPlayer crashes on mencoded MPEG1-AVI with b-frames
by Monika Schilling 08 Aug '04

08 Aug '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 MPlayer crashes immediately playing a MPEG-1 AVI file with b-frames, which has been encoded with mencoder. Other players, for example the win32 program "Media Player Classic" (http://sourceforge.net/projects/guliverkli/) have no problems playing the video. In the following you will find 3 sections: 1. Encoding with mencoder 2. Running MPlayer and conserving crash information 3. System information ========================= 1. ENCODING WITH MENCODER ========================= The source video ct.mpv decends from a DVB broadcast. ms@epia ~/pers/prg/cygwin/MPlayer-20031130 $ ./mencoder -vf crop=704:576,lavcdeint,scale=352:288 -sws 1 -ovc lavc -lavcopts vcodec=mpeg1video:vmax_b_frames=2:mbd=1:keyint=250:vqscale=3 :aspect=4/3 -endpos 30 /tmp/ct.mpv -o /tmp/ct.avi Using GNU internationalization Original domain: messages Original dirname: /usr/share/locale Current domain: mplayer Current dirname: /usr/local/share/locale MEncoder dev-CVS-031130-06:00-3.3.1 (C) 2000-2003 MPlayer Team CPU: IDT/Centaur/VIA C3 Samuel 2 (WinChip C5B core)/C3 Ezra (Family: 6, Stepping: 3) Detected cache-line size is 32 bytes CPUflags: Type: 6 MMX: 1 MMX2: 0 3DNow: 1 3DNow2: 0 SSE: 0 SSE2: 0 Compiled for x86 CPU with extensions: MMX 3DNow Reading /home/ms/.mplayer/codecs.conf: Can't open '/home/ms/.mplayer/codecs.conf': No such file or directory Reading /usr/local/etc/mplayer/codecs.conf: Can't open '/usr/local/etc/mplayer/codecs.conf': No such file or directory Using built-in default codecs.conf. File not found: 'frameno.avi' Failed to open frameno.avi Reading config file /home/ms/.mplayer/mencoder: No such file or directory success: format: 0 data: 0x0 - 0x2596EBF0 MPEG-ES file format detected. VIDEO: MPEG2 720x576 (aspect 2) 25.000 fps 8078.0 kbps (1009.8 kbyte/s) [V] filefmt:1 fourcc:0x10000002 size:720x576 fps:25.00 ftime:=0.0400 Opening video filter: [expand osd=1] Expand: -1 x -1, -1 ; -1 (-1=autodetect) osd: 1 Opening video filter: [scale w=352 h=288] Opening video filter: [lavcdeint] Opening video filter: [crop w=704 h=576] Crop: 704 x 576, -1 ; -1 ========================================================================== Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough VDec: vo config request - 720 x 576 (preferred csp: Mpeg PES) Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] The selected video_out device is incompatible with this codec. VDecoder init failed :( Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.3.1 Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2)) ========================================================================== Writing AVI header... Pos: 0.0s 2f ( 0%) 0fps Trem: 0min 0mb A-V:0.000 [0:0] 1 duplicate frame(s)! Pos: 0.0s 3f ( 0%) 0fps Trem: 0min 0mb A-V:0.000 [0:0] 1 duplicate frame(s)! Pos: 0.1s 4f ( 0%) 0fps Trem: 0min 0mb A-V:0.000 [0:0] 1 duplicate frame(s)! Pos: 0.1s 5f ( 0%) 0fps Trem: 0min 0mb A-V:0.000 [0:0] 1 duplicate frame(s)! Pos: 0.2s 6f ( 0%) 0fps Trem: 0min 0mb A-V:0.000 [0:0] 1 duplicate frame(s)! Pos: 0.2s 7f ( 0%) 0fps Trem: 0min 0mb A-V:0.000 [0:0] 1 duplicate frame(s)! Pos: 0.2s 8f ( 0%) 0fps Trem: 0min 0mb A-V:0.000 [0:0] 1 duplicate frame(s)! Pos: 0.3s 9f ( 0%) 0fps Trem: 0min 0mb A-V:0.000 [0:0] 1 duplicate frame(s)! Pos: 0.3s 10f ( 0%) 0fps Trem: 0min 0mb A-V:0.000 [0:0] 1 duplicate frame(s)! VDec: vo config request - 720 x 576 (preferred csp: Planar YV12)0:0] VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is 1.33:1 - prescaling to correct movie aspect. SwScaler: reducing / aligning filtersize 5 -> 4 SwScaler: reducing / aligning filtersize 5 -> 4 SwScaler: reducing / aligning filtersize 5 -> 4 SwScaler: reducing / aligning filtersize 5 -> 4 SwScaler: BILINEAR scaler, from Planar YV12 to Planar YV12 using 3DNOW videocodec: libavcodec (352x288 fourcc=3167706d [mpg1]) High quality encoding selected (non real time)! Using constant qscale = 3.000000 (VBR) 1 duplicate frame(s)! New_Face failed. Maybe the font path is wrong. 0mb A-V:0.000 [0:0] Please supply the text font file (~/.mplayer/subfont.ttf). subtitle font: load_sub_face failed. 1 duplicate frame(s)! Pos: 30.0s 750f ( 2%) 5fps Trem: 105min 257mb A-V:0.000 [1783:0] Writing AVI index... Fixing AVI header... Video stream: 1783.121 kbit/s (222890 bps) size: 6677789 bytes 29.960 secs 750 frames =================================================== 2. RUNNING MPLAYER AND CONSERVING CRASH INFORMATION =================================================== ms@epia ~/pers/prg/cygwin/MPlayer-20031130 $ cat ~/.mplayer/config # Write your default config options here! # fs=yes # quiet=yes framedrop=yes cache=4096 double=yes vop=yuy2 autoq=0 aspect=4:3 # aspect=16:9 For the gdb session please look at the appended file mplayer.bug. ===================== 3. SYSTEM INFORMATION ===================== Cygwin: ms@epia ~/pers/prg/cygwin/MPlayer-20031130 $ cat /proc/version CYGWIN_NT-5.1 1.5.5(0.94/3/2) 2003-09-20 16:31 REMARK: The crash occurs on my linux box with SuSE Linux 9.0 too. libc version: ms@epia ~/pers/prg/cygwin/MPlayer-20031130 $ ls -l /lib/libc[.-]* -rw-r--r-- 1 ms Kein 761322 Sep 20 22:32 /lib/libc.a gcc and ld versions: ms@epia ~/pers/prg/cygwin/MPlayer-20031130 $ gcc -v Reading specs from /usr/lib/gcc-lib/i686-pc-cygwin/3.3.1/specs Configured with: /GCC/gcc-3.3.1-3/configure --with-gcc --with-gnu-ld --with-gnu-as --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --libdir=/usr/lib --libexecdir=/usr/sbin --mandir=/usr/share/man --infodir=/usr/share/info --enable-languages=c,ada,c++,f77,pascal,java,objc --enable-libgcj --enable-threads=posix --with-system-zlib --enable-nls --without-included-gettext --enable-interpreter --enable-sjlj-exceptions --disable-version-specific-runtime-libs --enable-shared --disable-win32-registry --enable-java-gc=boehm --disable-hash-synchronization --verbose --target=i686-pc-cygwin --host=i686-pc-cygwin --build=i686-pc-cygwin Thread model: posix gcc version 3.3.1 (cygming special) ms@epia ~/pers/prg/cygwin/MPlayer-20031130 $ ld -v GNU ld version 2.14.90 20030901 CPU info: ms@epia ~/pers/prg/cygwin/MPlayer-20031130 $ cat /proc/cpuinfo processor : 0 vendor_id : CentaurHauls type : primary processor cpu family : 6 model : 7 model name : VIA Samuel 2 stepping : 3 brand id : 0 cpu count : 0 apic id : 0 cpu MHz : 533 fpu : yes flags : fpu de tsc msr mtrr pge mmx Thank you for MPlayer! Monika -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (MingW32) - GPGrelay v0.93 iD8DBQE/y4FHSZqAGBq9jOkRAhXPAJ9i5BlBNLyYo6//QUVmdPaEdy0dMwCfT7kg TfotDNbk/fIR+bGeYqDQvrM= =swtK -----END PGP SIGNATURE-----

3 3

libfaad segfault
by Attila Kinali 26 Feb '04

26 Feb '04

Heyo, Libfaad is segfaulting because hDecoder->pow2_table is not correctly set anymore. I uploaded zx.escaflowne.movie.part1.divx511.mkv and zx.escaflowne.movie.part1.divx511.txt to mphq. Attila Kinali -- egp ist vergleichbar mit einem ikea bausatz fuer flugzeugtraeger -- reeler in +kaosu

1 0

Streaming video (ASX format)
by Gautam.Mundle＠colorado.edu 25 Feb '04

25 Feb '04

Hi, I am trying to set up a multicast network to deliver video to clients. I have a win2000 server running windows media encoder and windows media server. I have a link to a .asx file.My .asx file then has a hyperlink to a station.nsc file which has some encrypted information. Now when i try to open my .asx file through my browser using the link,it opens the media player which says opening and waiting..it just sits there. could you provide any guidelines as to what could be the issue here. isnt my station.nsc file supposed to get the media stream(ASF stream..also I am using a .avi file as input to the encoder..could that be an issue). this is an university project and any help would be beneficial, thanks.

1 0

mending vob files
by hdp＠webmail.co.za 17 Feb '04

17 Feb '04

Hi guys, I have four vob files, the first three of 1gb each, the last of about 500mb, of one movie, that I wish to make one long vob of. I tried cat *.vob | mencoder -oac copy -ovc copy -o movie.vob - but got this error about a 20 seconds or so into the copy: Too many audio packets in the buffer: (4096 in 8241152 bytes). Maybe you are playing a non-interleaved stream/file or the codec failed? For AVI files, try to force non-interleaved mode with the -ni option. adding -ni didn't help If I just cat them together the image is fine, but sound is completely buggerd. What is the correct way of doing this? Thank you Kind regards Hans du Plooy hdp(a)webmail.co.za

1 0

ffmpeg12 error error concealment problem
by Zoltan Hidvegi 17 Feb '04

17 Feb '04

I've uploaded the file ffmpeg12-bug.ts to mplayerhq incoming. Play it with mplayer ffmpeg12-bug.ts -tsprog 2 -vop field,crop=1408:1056:256:16 -nosound -vfm ffmpeg and watch the ugliness. Now try the same with -vfm libmpeg2, it looks much better. Zoli

2 4

codec tsccvid.dll: playback fails if vid.res. is 1024:768 (device is incompatible with this codec)
by Thomas Kranz 16 Feb '04

16 Feb '04

Hi mplayer-users and developers, I'm posting here because I got a tscc-codec problem and no answer/solution from the users list. The codec is in the codec-package of mplayer. I've a severe problem: I have here some lectures recorded with a screen capture tool developed by Techsmith. The playback of videos with 800:600 works fine but the new lectures are recorded with 1024:768 and the playback with the latest mplayer doesn't work: Opening video decoder: [vfw] Win32/VfW video codecs ======= Win32 (VFW) VIDEO Codec init ======= Loading codec DLL: 'tsccvid.dll' get_path('registry') -> '/home/thomas/.mplayer/registry' Loaded DLL driver tsccvid.dll ICDecompressGetFormatSize ret: 40 ICDecompressGetFormat OK VDec: vo config request - 1024 x 768 (preferred csp: Packed YUY2) [PP] Using codec's postprocessing, max q = 9. Trying filter chain: vo Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] SwScale params: -1 x -1 (-1=no scaling) Trying filter chain: scale vo The selected video_out device is incompatible with this codec. VDecoder init failed :( Cannot find codec matching selected -vo and video format 0x63637374. Read DOCS/HTML/en/codecs.html! "selected video_out device" is incompatible with this codec is the first hint for me, so I tried different output devices and x11 color depth - no success. Has anybody a hint or solution to playback the video. Examples videos can be found eg. at http://porta.informatik.uni-freiburg.de/lectures/TI1/LocalReplay/AVI/ (This are the working ones). But the TI2 lecture has videos which aren't working with the described problems: http://porta.informatik.uni-freiburg.de/lectures/TI2/02-ss/Vorlesungsaufzei… There are also divx-videos but with a big disadvantage - the quality is too bad for because there are edge detection problems and aliasing effects. The results are ugly looking chars and edges. Not very wise to encode the video in divx without an appropiate filter to avoid these problems (sharpen filter eg). In Windows all playback is fine. I also copied the latest tsccvid.dll to the /usr/lib/win32 dir. The codec can be found at: http://www-i7.informatik.rwth-aachen.de/d/teaching/ws0304/modelchk/instruct… So here is my first check of the differences between the working and not working one: The fourcc id is the same: 0x63637374 (tsccvid.dll) The main difference is the resolution (800:600 to 1024:768) and the use of BGR 15-bit conversion to the output device VDec: using BGR 15-bit as output csp (no 0) (working with 800:600). The biBitCount of the video format has also changed from 16 to 24 bit. It seems that the colorspace/depth conversion fails with 1024:768. I suppose that the greater resolution can't be handled by the video filter/scaler to the output device. This is not very common resolution for mainstream video movies. Are there any helpful changes to be made to the code or codecs config to solve this problem or is the problem the BGR 15 bit conversion with this resolution ? Reading the codecs howto didn't helped me. The working one has a 800x600 resolution and a 15-bit YUY2 colorspace: appropiate mplayer log: Loading codec DLL: 'tsccvid.dll' Loaded DLL driver tsccvid.dll ICDecompressGetFormatSize ret: 40 ICDecompressGetFormat OK VDec: vo config request - 800 x 600 (preferred csp: Packed YUY2) [PP] Using codec's postprocessing, max q = 9. Trying filter chain: vo Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] SwScale params: -1 x -1 (-1=no scaling) Trying filter chain: scale vo VDec: using BGR 15-bit as output csp (no 0) Opening video filter: [flip] Movie-Aspect is undefined - no prescaling applied. VO Config (800x600->800x600,flags=8,'MPlayer',0x4247520F) REQ: flags=0x475 req=0x400 SwScaler: reducing / aligning filtersize 1 -> 4 SwScaler: reducing / aligning filtersize 1 -> 4 SwScaler: reducing / aligning filtersize 1 -> 1 SwScaler: reducing / aligning filtersize 9 -> 8 SwScaler: BICUBIC scaler, from BGR 15-bit to Planar YV12 using MMX2 SwScaler: using 4-tap MMX scaler for horizontal luminance scaling SwScaler: using 4-tap MMX scaler for horizontal chrominance scaling SwScaler: using 1-tap MMX "scaler" for vertical scaling (YV12 like) SwScaler: 800x600 -> 800x600 REQ: flags=0x437 req=0x0 VO: [xv] 800x600 => 800x600 Planar YV12 VO: Description: X11/Xv VO: Author: Gerd Knorr <kraxel(a)goldbach.in-berlin.de> and others Xvideo image format: 0x32595559 (YUY2) packed Xvideo image format: 0x32315659 (YV12) planar Xvideo image format: 0x59565955 (UYVY) packed Xvideo image format: 0x30323449 (I420) planar using Xvideo port 105 for hw scaling [xv] dx: 0 dy: 0 dw: 800 dh: 640 ICDecompressQuery OK Input format: ======= VIDEO Format ====== biSize 40 biWidth 800 biHeight 600 biPlanes 1 biBitCount 16 biCompression 1667462004='tscc' biSizeImage 1920000 =========================== Output format: ======= VIDEO Format ====== biSize 40 biWidth 800 biHeight 600 biPlanes 1 biBitCount 16 biCompression 0='' biSizeImage 960000 =========================== INFO: Win32 video codec init OK! Selected video codec: [camtasia] vfm:vfw (TechSmith Camtasia Screen Codec) ========================================================================== The "new" not working one verbose log: ======= VIDEO Format ====== biSize 40 biWidth 1024 biHeight 768 biPlanes 1 biBitCount 24 biCompression 1667462004='tscc' biSizeImage 4718592 =========================== and fails at ========================================================================== Opening video decoder: [vfw] Win32/VfW video codecs ======= Win32 (VFW) VIDEO Codec init ======= Loading codec DLL: 'tsccvid.dll' get_path('registry') -> '/home/thomas/.mplayer/registry' Loaded DLL driver tsccvid.dll ICDecompressGetFormatSize ret: 40 ICDecompressGetFormat OK VDec: vo config request - 1024 x 768 (preferred csp: Packed YUY2) [PP] Using codec's postprocessing, max q = 9. Trying filter chain: vo Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] SwScale params: -1 x -1 (-1=no scaling) Trying filter chain: scale vo The selected video_out device is incompatible with this codec. VDecoder init failed :( Cannot find codec matching selected -vo and video format 0x63637374. Read DOCS/HTML/en/codecs.html! ========================================================================== Thanks for any help. Thomas

6 8

libmpeg2 coredump
by Zoltan Hidvegi 15 Feb '04

15 Feb '04

I've uploaded the file libmp2-bug.ts to mplayerhq incoming. Here is a transcript of what happens: % gdb --args /hzoli/l/src/mplayercvs/main/mplayer libmp2-bug.ts -tsprog 2 -vop crop=1408:1056:256:16 -nosound -vo null GNU gdb 5.3.90_2003-08-24-cvs-debian Copyright 2003 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-linux"... (gdb) run Starting program: /nfs/hzoli/usr/local/src/mplayercvs/main/mplayer libmp2-bug.ts -tsprog 2 -vop crop=1408:1056:256:16 -nosound -vo null [New Thread 16384 (LWP 5728)] MPlayer dev-CVS-040127-14:02-3.3.3 (C) 2000-2004 MPlayer Team CPU: Intel Celeron 2/Pentium III Tualatin 532.0 MHz (Family: 6, Stepping: 1) Detected cache-line size is 32 bytes CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0 Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE Reading config file /etc/mplayer/mplayer.conf Reading config file /home/hzoli/.mplayer/config Reading /home/hzoli/.mplayer/codecs.conf: Can't open '/home/hzoli/.mplayer/codec s.conf': No such file or directory Reading /etc/mplayer/codecs.conf: 61 audio & 149 video codecs font: can't open file: /home/hzoli/.mplayer/font/font.desc Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars) Failed to open /dev/rtc: Device or resource busy (mplayer should be setuid root or /dev/rtc should be readable by the user.) Using usleep() timing Can't open input config file /home/hzoli/.mplayer/input.conf: No such file or di rectory Input config file /etc/mplayer/input.conf parsed: 52 binds Setting up LIRC support... mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing libmp2-bug.ts. TS file format detected. DEMUX OPEN, AUDIO_ID: -2, VIDEO_ID: -1, SUBTITLE_ID: -1, PROBING UP TO 2000000, PROG: 2 VIDEO MPEG2(pid=33)...NO AUDIO! NO SUBS (yet)! PROGRAM N. 2 Opened TS demuxer, audio: ffffffff(pid -2), video: 10000002(pid 33)...POS=85812 VIDEO: MPEG2 1920x1080 (aspect 3) 29.970 fps 45000.0 kbps (5625.0 kbyte/s) SUB: Could not determine file format Cannot load subtitles: ./libmp2-bug.txt Opening video filter: [crop w=1408 h=1056 x=256 y=16] Crop: 1408 x 1056, 256 ; 16 ========================================================================== Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough VDec: vo config request - 1920 x 1080 (preferred csp: Mpeg PES) Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] Opening video filter: [lavc] Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] The selected video_out device is incompatible with this codec. VDecoder init failed :( Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.3.1 Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2)) ========================================================================== Audio: no sound Starting playback... VDec: vo config request - 1920 x 1088 (preferred csp: Planar YV12) VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. Opening video filter: [expand] Expand: -1 x -1, -1 ; -1 (-1=autodetect) osd: 0 VO: [null] 1408x1056 => 1408x1056 Mpeg PES V:8569.6 16 158% 251% 0.0% 0 0 0% Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 16384 (LWP 5728)] 0x0816bafd in mpeg2_set_buf (mpeg2dec=0x86996c0, buf=0x86a1538, id=0x86a1518) at decode.c:383 383 if (mpeg2dec->custom_fbuf && !mpeg2dec->fbuf[1]->buf[0]){ (gdb) bt #0 0x0816bafd in mpeg2_set_buf (mpeg2dec=0x86996c0, buf=0x86a1538, id=0x86a1518) at decode.c:383 #1 0x081122ef in decode (sh=0x8699610, data=0x3, len=141169944, flags=0) at vd_libmpeg2.c:147 #2 0x0810e026 in decode_video (sh_video=0x8699610, start=0x86a1518 "", in_size=141169944, drop_frame=0) at dec_video.c:304 #3 0x08094d3a in main (argc=9, argv=0xbffff764) at mplayer.c:2091 (gdb) Zoli

1 0

[BUG] mplayer bugs away with MPEG1 clip
by Gabucino 05 Feb '04

05 Feb '04

http://www.kontrollfilm.hu/media/kontroll_320x240.mpg 1. MPlayer detects MP3 audio instead of MP2, and so the sound goes br0ke. 2. Try watching it with -vf spp=(1-...), the image will blur and shake. It's very unwatchable. -- Gabucino MPlayer Core Team

3 7

mplayer still crashes with -fs
by Greg Stark 05 Feb '04

05 Feb '04

So for a long time I've seen mplayer crash any time I run it with "-fs". It used to only crash about 1/4 of the time, usually when starting a second or third movie listed on the command-line. The problem has gotten worse in recent CVS compiles, for the past month or so any use of "-fs" on the command line causes an instant crash. Pressing "f" after the movie is playing never crashes however. To debug this I had to do a fair amount of work since mplayer and xlibs conspire to make debugging such things hard. I added a call to XSynchronize(mDisplay,True) early in vo_init. Otherwise the error occurs too late whenever the X error comes back. It would be nice if mplayer supported the standard Xt option -synchronize. I also had to link against debugging versions of the xlibs otherwise the gdb backtrace doesn't seem to be able to dig its way out of the xlib calls into mplayer. Having done all that the backtrace from a breakpoint on abort() looks like: Starting program: /home/usr_local/src/mplayer/main/mplayer -ao null -zoom -vo xv -fs ~/theSpeech_hiband.wmv VO: [xv] 320x240 => 320x240 Planar YV12 [fs] [zoom] X11 error: BadWindow (invalid Window parameter) [Switching to Thread 1086747552 (LWP 15630)] Breakpoint 1, 0x408f1430 in abort () from /lib/tls/libc.so.6 #0 0x408f1430 in abort () from /lib/tls/libc.so.6 #1 0x080cca7d in x11_errorhandler (display=0x860ca70, event=0xbfffdbc0) at x11_common.c:156 #2 0x40696354 in _XError (dpy=0x860ca70, rep=0xbfffdc90) at XlibInt.c:2898 #3 0x406948b3 in _XReply (dpy=0x860ca70, rep=0xbfffdc90, extra=0, discard=1) at XlibInt.c:1787 #4 0x4068fb44 in XSync (dpy=0x860ca70, discard=0) at Sync.c:45 #5 0x4068fc05 in _XSyncFunction (dpy=0x6) at Synchro.c:34 #6 0x40684275 in XMapRaised (dpy=0x860ca70, w=54525955) at MapRaised.c:49 #7 0x080cee20 in vo_x11_fullscreen () at x11_common.c:1068 #8 0x080d3c46 in config (width=320, height=240, d_width=320, d_height=240, flags=5, title=0x83cc3bb "MPlayer", format=842094169) at vo_xv.c:258 #9 0x0811b1f0 in config () #10 0x0810bf11 in mpcodecs_config_vo () #11 0x0811344c in init () #12 0x0810b295 in init_video () #13 0x0810b45d in init_best_video_codec () #14 0x0809ac34 in main () (gdb) I have a few hunches. 1) I have multiple screens (without xinerama). Is it possible the value returned by DefaultScreen() or RootWindow() isn't the proper one for the window that's created later by vo_x11_create_smooth_window() ? I haven't spotted any evidence this is the case however. B) I have an mga card but I'm running 2.6.1 where the driver for the mga_vid device doesn't seem to compile. So it might be starting up the vo_mga driver initializing a few things, then failing back to the xv driver and reinitializing things, perhaps getting confused. However the backtrace above is with "-vo xv" so that isn't happening here. The messages printed by the run above with the backtrace cut off, because it's above: Starting program: /home/usr_local/src/mplayer/main/mplayer -ao null -zoom -vo xv -fs ~/theSpeech_hiband.wmv Breakpoint 1 at 0x8095db0 [New Thread 1086747552 (LWP 15630)] Breakpoint 1 at 0x408f1430 Using GNU internationalization Original domain: messages Original dirname: /usr/share/locale Current domain: mplayer Current dirname: /usr/local/share/locale MPlayer dev-CVS-040203-12:33-3.3.3 (C) 2000-2004 MPlayer Team CPU: Intel Pentium 4/Xeon/Celeron Foster 2800 MHz (Family: 8, Stepping: 9) Detected cache-line size is 64 bytes CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2 Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file or directory Reading config file /home/stark/.mplayer/config Reading /home/stark/.mplayer/codecs.conf: Can't open '/home/stark/.mplayer/codecs.conf': No such file or directory Reading /usr/local/etc/mplayer/codecs.conf: Can't open '/usr/local/etc/mplayer/codecs.conf': No such file or directory Using built-in default codecs.conf. Font /home/stark/.mplayer/font/font.desc loaded successfully! (206 chars) Using Linux hardware RTC timing (1024Hz). Input config file /home/stark/.mplayer/input.conf parsed: 0 binds Setting up LIRC support... mplayer: could not connect to socket mplayer: Connection refused Failed to open LIRC support. You will not be able to use your remote control. Playing /home/stark/theSpeech_hiband.wmv. ASF file format detected. ============ ASF Stream group == START === object size = 38 stream count=[0x2][2] stream id=[0x1][1] max bitrate=[0xfd7b][64891] stream id=[0x2][2] max bitrate=[0x6f8ff][456959] ============ ASF Stream group == END === VIDEO: [WMV2] 320x240 24bpp ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 8005->176400 (64.0 kbit) Selected audio codec: [ffwmav2] afm:ffmpeg (DivX audio v2 (ffmpeg)) ========================================================================== vo: X11 running at 1600x1200 with depth 16 and 16 bpp (":1.0" => local display) ========================================================================== Opening video decoder: [dshow] DirectShow video codecs FATAL releasing corrupted memory! 0x8610788 0x0 (12) Decoder supports the following YUV formats: YUY2 IYUV UYVY YV12 YVYU I420 YVU9 Decoder is capable of YUV output (flags 0x7f) VDec: vo config request - 320 x 240 (preferred csp: Packed YUY2) [PP] Using codec's postprocessing, max q = 4. VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is undefined - no prescaling applied. VO: [xv] 320x240 => 320x240 Planar YV12 [fs] [zoom] X11 error: BadWindow (invalid Window parameter) The other stuff from bugreports.xml: <sect2 id="bugreports_system"> <title>System Information</title> <para> <itemizedlist> <listitem><para> Your Linux distribution or operating system and version e.g.: Debian unstable </para></listitem> <listitem><para> kernel version: Linux stark.xeocode.com 2.6.1 #7 SMP Thu Jan 29 00:57:15 EST 2004 i686 GNU/Linux </para></listitem> <listitem><para> libc version: -rw-r--r-- 1 root root 1244004 Jan 20 12:29 /lib/libc-2.3.2.so lrwxrwxrwx 1 root root 14 Oct 18 11:48 /lib/libc.so.5 -> libc.so.5.4.46 -rw-r--r-- 1 root root 565940 Sep 22 11:45 /lib/libc.so.5.4.46 lrwxrwxrwx 1 root root 13 Feb 3 12:29 /lib/libc.so.6 -> libc-2.3.2.so </para></listitem> <listitem><para> gcc and ld versions: Reading specs from /usr/lib/gcc-lib/i486-linux/3.3.3/specs Configured with: ../src/configure -v --enable-languages=c,c++,java,f77,pascal,objc,ada,treelang --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-gxx-include-dir=/usr/include/c++/3.3 --enable-shared --with-system-zlib --enable-nls --without-included-gettext --enable-__cxa_atexit --enable-clocale=gnu --enable-debug --enable-java-gc=boehm --enable-java-awt=xlib --enable-objc-gc i486-linux Thread model: posix gcc version 3.3.3 20040110 (prerelease) (Debian) GNU ld version 2.14.90.0.7 20031029 Debian GNU/Linux </para></listitem> <listitem><para> binutils version: <screen> GNU assembler 2.14.90.0.7 20031029 Debian GNU/Linux Copyright 2002 Free Software Foundation, Inc. This program is free software; you may redistribute it under the terms of the GNU General Public License. This program has absolutely no warranty. This assembler was configured for a target of `i386-linux'. </screen> </para></listitem> <listitem><para> If you have problems with fullscreen mode: <itemizedlist> <listitem><para>Window manager type and version</para></listitem> twm do they still give version numbers for twm? I don't think they've changed a line of code in decades. </itemizedlist> </para></listitem> <listitem><para> If you have problems with XVIDIX: <itemizedlist> <listitem><para>X colour depth: <screen>xdpyinfo | grep "depth of root"</screen> </para></listitem> </itemizedlist> </para></listitem> <listitem><para> If only the GUI is buggy: <itemizedlist> <listitem><para>GTK version</para></listitem> <listitem><para>GLIB version</para></listitem> <listitem><para>libpng version</para></listitem> <listitem><para>GUI situation in which the bug occurs</para></listitem> </itemizedlist> </para></listitem> </itemizedlist> </para> </sect2> -- greg

5 10

Bugs/problems with JPEG output driver
by Doug Reynolds 02 Feb '04

02 Feb '04

I have found a few relatively minor bugs / problems with the JPEG video output driver. My system and hardware information is included at the bottom of this message. Three problems are described below. Doug ---------------------------------------------------------------------------- Problem 1 --------- When using the "-ss [time]" option, the first output JPEG file is always the first frame in the video. Subsequent JPEG files are from the correct part of the file. Example: mplayer -vo jpeg -ss 60 -frames 5 vis.001.avi >& mplayer.log Six JPEG files are created - one for the first frame of the file, then five as requested with the "-frames 5" option. The output log follows: MPlayer dev-CVS-040202-00:00-3.2.2 (C) 2000-2004 MPlayer Team CPU: Intel Pentium 4/Xeon/Celeron Foster 2658 MHz (Family: 8, Stepping: 7) Detected cache-line size is 64 bytes CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2 Reading config file /home/jalapeno/reynolds/local/etc/mplayer/mplayer.conf: No such file or directory Reading config file /users/reynolds/.mplayer/config Reading /users/reynolds/.mplayer/codecs.conf: Can't open '/users/reynolds/.mplayer/codecs.conf': No such file or directory Reading /home/jalapeno/reynolds/local/etc/mplayer/codecs.conf: Can't open '/home/jalapeno/reynolds/local/etc/mplayer/codecs.conf': No such file or directory Using built-in default codecs.conf. font: can't open file: /users/reynolds/.mplayer/font/font.desc Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied Font /home/jalapeno/reynolds/local/share/mplayer/font/font.desc loaded successfully! (206 chars) Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup scripts. Using usleep() timing Can't open input config file /users/reynolds/.mplayer/input.conf: No such file or directory Can't open input config file /home/jalapeno/reynolds/local/etc/mplayer/input.conf: No such file or directory Falling back on default (hardcoded) input config Setting up LIRC support... mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing ../fps20_2004-01-14_11-02-32/vis.001.avi. AVI file format detected. VIDEO: [dvsd] 720x480 24bpp 29.970 fps 28771.2 kbps (3512.1 kbyte/s) ========================================================================== Opening audio decoder: [pcm] Uncompressed PCM audio decoder AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 192000->192000 (1536.0 kbit) Selected audio codec: [pcm] afm:pcm (Uncompressed PCM) ========================================================================== ========================================================================== Opening video decoder: [dshow] DirectShow video codecs Decoder supports the following YUV formats: YUY2 UYVY Decoder is capable of YUV output (flags 0x9) VDec: vo config request - 720 x 480 (preferred csp: Packed YUY2) [PP] Using codec's postprocessing, max q = 4. Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] VDec: using Packed YUY2 as output csp (no 0) Movie-Aspect is undefined - no prescaling applied. SwScaler: reducing / aligning filtersize 1 -> 4 SwScaler: reducing / aligning filtersize 1 -> 4 SwScaler: reducing / aligning filtersize 1 -> 1 SwScaler: reducing / aligning filtersize 1 -> 1 SwScaler: BICUBIC scaler, from Packed YUY2 to RGB 24-bit using MMX2 VO: [jpeg] 720x480 => 720x480 RGB 24-bit Win32 Warning: Unlocking unlocked Critical Section 0x869a1dc!! Win32 Warning: Unlocking unlocked Critical Section 0x869a1c4!! Win32 Warning: Unlocking unlocked Critical Section 0x869a1c4!! Selected video codec: [qdv] vfm:dshow (Sony Digital Video (DV)) ========================================================================== Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit... AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian) AO: [oss] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps) Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit... Starting playback... Win32 Warning: Unlocking unlocked Critical Section 0x869a1dc!! A: 0.1 V: 0.0 A-V: 0.060 ct: 0.000 1/ 1 0% 0% 0.0% 0 0 0% Win32 Warning: Unlocking unlocked Critical Section 0x869a1dc!! A: 60.0 V: 60.0 A-V: 0.043 ct: 0.004 1799/1799 0% 0% 0.0% 0 0 0% Win32 Warning: Unlocking unlocked Critical Section 0x869a1dc!! A: 60.1 V: 60.0 A-V: 0.053 ct: 0.008 1800/1800 0% 0% 0.0% 0 0 0% Win32 Warning: Unlocking unlocked Critical Section 0x869a1dc!! A: 60.1 V: 60.1 A-V: 0.064 ct: 0.011 1801/1801 0% 0% 0.0% 0 0 0% Win32 Warning: Unlocking unlocked Critical Section 0x869a1dc!! A: 60.2 V: 60.1 A-V: 0.074 ct: 0.014 1802/1802 0% 0% 0.0% 0 0 0% Win32 Warning: Unlocking unlocked Critical Section 0x869a1dc!! A: 60.2 V: 60.1 A-V: 0.085 ct: 0.018 1803/1803 0% 0% 0.0% 0 0 0% Win32 Warning: Unlocking unlocked Critical Section 0x869a1dc!! Total Unfree 1146 bytes cnt 13 [(nil),0] Exiting... (End of file) ---------------------------------------------------------------------------- Problem 2 --------- The output filenames created using the JPEG driver are numbered starting at 1. If the decoding does not start with the first frame, as in the example used in describing Problem 1 above, it would be desireable to use the frame number to construct the file name. The example above produced these output files: > ls *.jpg 00000001.jpg 00000002.jpg 00000003.jpg 00000004.jpg 00000005.jpg 00000006.jpg The frame numbers are apparently known, and displayed on these lines: A: 0.1 V: 0.0 A-V: 0.060 ct: 0.000 1/ 1 0% 0% 0.0% 0 0 0% A: 60.0 V: 60.0 A-V: 0.043 ct: 0.004 1799/1799 0% 0% 0.0% 0 0 0% A: 60.1 V: 60.0 A-V: 0.053 ct: 0.008 1800/1800 0% 0% 0.0% 0 0 0% A: 60.1 V: 60.1 A-V: 0.064 ct: 0.011 1801/1801 0% 0% 0.0% 0 0 0% A: 60.2 V: 60.1 A-V: 0.074 ct: 0.014 1802/1802 0% 0% 0.0% 0 0 0% A: 60.2 V: 60.1 A-V: 0.085 ct: 0.018 1803/1803 0% 0% 0.0% 0 0 0% So it would be useful if the output files were 00001799.jpg, 00001800.jpg, etc. This would allow multiple sections of the same file to be decoded in one common subdirectory, without conflicting filenames. ---------------------------------------------------------------------------- Problem 3 --------- The "-vf tinterlace" filter appears to be incompatible with the JPEG video output driver. Output from the following command is shown below: mplayer -vo jpeg -vf tinterlace vis.001.avi > & mplayer.log Either of the following commands will work correctly: mplayer -vf tinterlace vis.001.avi mplayer -vo jpeg vis.001.avi This problem seems to be independent of the type of input file. MPlayer dev-CVS-040202-00:00-3.2.2 (C) 2000-2004 MPlayer Team CPU: Intel Pentium 4/Xeon/Celeron Foster 2658 MHz (Family: 8, Stepping: 7) Detected cache-line size is 64 bytes CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2 Reading config file /home/jalapeno/reynolds/local/etc/mplayer/mplayer.conf: No such file or directory Reading config file /users/reynolds/.mplayer/config Reading /users/reynolds/.mplayer/codecs.conf: Can't open '/users/reynolds/.mplayer/codecs.conf': No such file or directory Reading /home/jalapeno/reynolds/local/etc/mplayer/codecs.conf: Can't open '/home/jalapeno/reynolds/local/etc/mplayer/codecs.conf': No such file or directory Using built-in default codecs.conf. font: can't open file: /users/reynolds/.mplayer/font/font.desc Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied Font /home/jalapeno/reynolds/local/share/mplayer/font/font.desc loaded successfully! (206 chars) Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup scripts. Using usleep() timing Can't open input config file /users/reynolds/.mplayer/input.conf: No such file or directory Can't open input config file /home/jalapeno/reynolds/local/etc/mplayer/input.conf: No such file or directory Falling back on default (hardcoded) input config Setting up LIRC support... mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing ../fps20_2004-01-14_11-02-32/vis.001.avi. AVI file format detected. VIDEO: [dvsd] 720x480 24bpp 29.970 fps 28771.2 kbps (3512.1 kbyte/s) ========================================================================== Opening audio decoder: [pcm] Uncompressed PCM audio decoder AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 192000->192000 (1536.0 kbit) Selected audio codec: [pcm] afm:pcm (Uncompressed PCM) ========================================================================== Opening video filter: [tinterlace] ========================================================================== Opening video decoder: [dshow] DirectShow video codecs Decoder supports the following YUV formats: YUY2 UYVY Decoder is capable of YUV output (flags 0x9) VDec: vo config request - 720 x 480 (preferred csp: Packed YUY2) [PP] Using codec's postprocessing, max q = 4. Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] The selected video_out device is incompatible with this codec. VDecoder init failed :( Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family Selected video codec: [ffdv] vfm:ffmpeg (FFmpeg DV decoder) ========================================================================== Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit... AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian) AO: [oss] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps) Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit... Starting playback... VDec: vo config request - 720 x 480 (preferred csp: Planar 411P) Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] The selected video_out device is incompatible with this codec. FATAL: Could not initialize video filters (-vf) or video output (-vo). Exiting... (End of file) ---------------------------------------------------------------------------- System Information ------------------ System: Red Hat 9 Kernel: Linux jalapeno 2.4.20 #3 SMP Mon Jun 23 10:28:03 EDT 2003 i686 i686 i386 GNU/Linux libc version: -rwxr-xr-x 1 root root 1561228 Nov 12 19:56 /lib/libc-2.3.2.so lrwxrwxrwx 1 root root 13 Nov 18 18:27 /lib/libc.so.6 -> libc-2.3.2.so gcc and ld versions: gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5) GNU ld version 2.13.90.0.18 20030206 binutils version: GNU assembler 2.13.90.0.18 20030206 Hardware and drivers -------------------- CPU: processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) CPU 2.66GHz stepping : 7 cpu MHz : 2657.883 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 5308.41 processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) CPU 2.66GHz stepping : 7 cpu MHz : 2657.883 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 5308.41 processor : 2 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) CPU 2.66GHz stepping : 7 cpu MHz : 2657.883 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 5308.41 processor : 3 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Xeon(TM) CPU 2.66GHz stepping : 7 cpu MHz : 2657.883 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 5308.41 Video card: nVidia GeForce 4 NVIDIA XFree86 Driver 1.0-4363 Sat Apr 19 17:49:42 PDT 2003 Sound card: None

2 1

Brain damaged avi file from psmplay, mplayer chokes.
by D Richard Felker III 02 Feb '04

02 Feb '04

I'm uploading psmplay_sux.avi to mphq for checking. It's a raw rgb avi generated by the "psmplay" program which rips psx videos. A/V sync is totally broken and "decoding" pcm audio uses 80% cpu. The interleaving is completely broken, but it should work with -ni, and it doesn't. -nobps helps the situation slightly, but not much. Attempts to encode it with mencoder crash. I'm told the original video is ~15 fps (1/4 ntsc refresh), but psmplay generated a 38 fps (wtf?!) avi file. Basically it's entirely broken, but for some reason WMP manages to play the file fine... So, why can't mplayer? :) Rich

1 0