April 2013 - MEncoder-users - lists.mplayerhq.hu

change frame rate
by Shiyuan 28 Feb '14

28 Feb '14

Hi, I have an avi video with 5000 frames. The original frame rate is 15 frames/per second, and it takes 300 seconds to play the whole video. I want the video to play faster so that it takes less time to complete, so I change the frame rate using the following command: mencoder in.avi -o out.avi -ofps 100 -ovc copy However, out.avi still take around 300 seconds to complete, even though out.avi does have fps of 100fps according to the info displayed by mplayer. What command options should I use if I want the output video to be complete in 50 sec? Thanks. Shiyuan

4 3

Help with mencoder
by JD 27 Apr '13

27 Apr '13

Hi, I wanted to combine 12 flash video files (from youtube) into a single avi file. So I did cat at Zachar*.flv > Zach_all.flv $ mencoder Zach_all.flv -o Zach_all.avi -forceidx -ovc copy -oac pcm The output shows skipping frames, and missing aspect information, as you see below. What do I need to do to fix that, so thet when I am transcoding into .avi, I do not get these skips and missing aspect info? MEncoder SVN-r31628-4.4.5 (C) 2000-2010 MPlayer Team success: format: 0 data: 0x0 - 0x8378f0a libavformat file format detected. [flv @ 0x92d07a0] Estimating duration from bitrate, this may be inaccurate [lavf] stream 0: video (h264), -vid 0 [lavf] stream 1: audio (aac), -aid 0 VIDEO: [H264] 480x270 0bpp 29.917 fps 119.2 kbps (14.5 kbyte/s) [V] filefmt:44 fourcc:0x34363248 size:480x270 fps:29.917 ftime:=0.0334 ========================================================================== Opening audio decoder: [faad] AAC (MPEG2/4 Advanced Audio Coding) AUDIO: 44100 Hz, 2 ch, s16le, 49.5 kbit/3.51% (ratio: 6184->176400) Selected audio codec: [faad] afm: faad (FAAD AAC (MPEG-2/MPEG-4 Audio)) ========================================================================== videocodec: framecopy (480x270 0bpp fourcc=34363248) Writing header... ODML: Aspect information not (yet?) available or unspecified, not writing vprp header. Writing header... ODML: Aspect information not (yet?) available or unspecified, not writing vprp header. Pos: 0.7s 21f ( 0%) 14.38fps Trem: 0min 0mb A-V:0.067 [0:1411] Skipping frame! Pos: 1.1s 33f ( 0%) 18.45fps Trem: 0min 0mb A-V:0.068 [150:1411] Skipping frame! Pos: 6.0s 182f ( 0%) 38.81fps Trem: 65min 1014mb A-V:0.067 [148:1411] Skipping frame! Pos: 23.5s 706f ( 0%) 43.90fps Trem: 70min 1142mb A-V:0.067 [106:1411] Skipping frame! Pos: 38.4s 1153f ( 0%) 44.83fps Trem: 68min 1147mb A-V:0.067 [113:1411] Skipping frame! Pos: 57.4s 1723f ( 0%) 44.84fps Trem: 66min 1117mb A-V:0.068 [124:1411] Skipping frame! Pos: 76.9s 2306f ( 1%) 44.36fps Trem: 65min 1089mb A-V:0.067 [128:1411] Skipping frame! Pos: 98.4s 2950f ( 1%) 44.17fps Trem: 65min 1092mb A-V:0.067 [126:1411] Skipping frame! Pos: 117.5s 3522f ( 1%) 43.68fps Trem: 65min 1086mb A-V:0.067 [128:1411] Skipping frame! Pos: 132.5s 3972f ( 2%) 43.76fps Trem: 66min 1092mb A-V:0.067 [127:1411] Skipping frame! Pos: 153.7s 4608f ( 2%) 44.14fps Trem: 66min 1104mb A-V:0.067 [126:1411] Skipping frame! Pos: 173.1s 5190f ( 2%) 43.84fps Trem: 68min 1133mb A-V:0.067 [120:1411] Skipping frame! Pos: 190.3s 5705f ( 3%) 44.08fps Trem: 67min 1122mb A-V:0.067 [121:1411] Skipping frame! Pos: 211.7s 6347f ( 3%) 43.80fps Trem: 66min 1114mb A-V:0.068 [124:1411] Skipping frame! Pos: 228.7s 6856f ( 3%) 43.84fps Trem: 66min 1113mb A-V:0.067 [124:1411] Skipping frame! Pos: 248.1s 7436f ( 4%) 44.06fps Trem: 65min 1110mb A-V:0.067 [125:1411] Skipping frame! Pos: 265.3s 7954f ( 4%) 43.82fps Trem: 66min 1120mb A-V:0.067 [123:1411] Skipping frame!

5 28

Help with MPG video encoding
by Walter Belhaven 20 Apr '13

20 Apr '13

Hi, I've got a question on how to get the best possible MPG encoding of a movie source, "at any price" so to speak -- i.e., as many bits as the encoder needs to get the highest possible video quality. It appears to me that the MPG encoding process is introducing artifacts that are present regardless of the amount of "free reign" I give to the encoder with respect to quantization, bitrate, and the like. My bottom line question is thus: "Are these artifacts inherent in MPG encoding, or am I just not twiddling the knobs and dials on the encoder correctly?" Here's all the details ... My source is a mixed hard- and soft-telecined "movie" at 1080/60i that I'm trying to tanscode to 480/24p, soft telecined to 480/60i, for ultimate burning to an NTSC DVD-Video. When I use mencoder to inverse telecine, crop out the crud, expand back to the original letterbox ratio (it's 2.35:1, not 16/9), and 'encode' the video with HUFFYUV (422P), the resulting video looks stunning, with no 'blocking' artifacts to speak of. This, of course, is as expected. But when I encode the video in MPG2 or MPG4, even with vqscale=1 or vqscale=2, I see sometimes severe blocking in the resulting video. Is this because the chroma is being subsampled vertically and horizontally (4:2:0), or is it because 'vqscale' is (perhaps necessary but) not sufficient to get "maximum quality at any price" encoding? Thanks, WB ____________________________________________________________________________________ Be a PS3 game guru. Get your game face on with the latest PS3 news and previews at Yahoo! Games. http://videogames.yahoo.com/platform?platform=120121

3 9

FFmpeg inverse telecine
by Moritz Barsnick 16 Apr '13

16 Apr '13

Hi, just FYI. As last noted by Carl Eugen Hoyos in <loom.20130225T121149-121(a)post.gmane.org> [*] (and also others), mencoder is only recommended to use where FFmpeg doesn't supply a solution. Inverse telecine is always mentioned as one of those missing features. Well, FFmpeg seems to have it now, at least on trunk (or HEAD or tip or whatever it's called): http://git.videolan.org/?p=ffmpeg.git;a=commitdiff;h=7a92ec93c6507bd3dea456… Moritz, from PAL-land [*] http://lists.mplayerhq.hu/pipermail/mencoder-users/2013-February/013291.html

3 7