November 2012 - MEncoder-users - lists.mplayerhq.hu

change frame rate
by Shiyuan 28 Feb '14

28 Feb '14

Hi, I have an avi video with 5000 frames. The original frame rate is 15 frames/per second, and it takes 300 seconds to play the whole video. I want the video to play faster so that it takes less time to complete, so I change the frame rate using the following command: mencoder in.avi -o out.avi -ofps 100 -ovc copy However, out.avi still take around 300 seconds to complete, even though out.avi does have fps of 100fps according to the info displayed by mplayer. What command options should I use if I want the output video to be complete in 50 sec? Thanks. Shiyuan

4 3

Help with mencoder
by JD 27 Apr '13

27 Apr '13

Hi, I wanted to combine 12 flash video files (from youtube) into a single avi file. So I did cat at Zachar*.flv > Zach_all.flv $ mencoder Zach_all.flv -o Zach_all.avi -forceidx -ovc copy -oac pcm The output shows skipping frames, and missing aspect information, as you see below. What do I need to do to fix that, so thet when I am transcoding into .avi, I do not get these skips and missing aspect info? MEncoder SVN-r31628-4.4.5 (C) 2000-2010 MPlayer Team success: format: 0 data: 0x0 - 0x8378f0a libavformat file format detected. [flv @ 0x92d07a0] Estimating duration from bitrate, this may be inaccurate [lavf] stream 0: video (h264), -vid 0 [lavf] stream 1: audio (aac), -aid 0 VIDEO: [H264] 480x270 0bpp 29.917 fps 119.2 kbps (14.5 kbyte/s) [V] filefmt:44 fourcc:0x34363248 size:480x270 fps:29.917 ftime:=0.0334 ========================================================================== Opening audio decoder: [faad] AAC (MPEG2/4 Advanced Audio Coding) AUDIO: 44100 Hz, 2 ch, s16le, 49.5 kbit/3.51% (ratio: 6184->176400) Selected audio codec: [faad] afm: faad (FAAD AAC (MPEG-2/MPEG-4 Audio)) ========================================================================== videocodec: framecopy (480x270 0bpp fourcc=34363248) Writing header... ODML: Aspect information not (yet?) available or unspecified, not writing vprp header. Writing header... ODML: Aspect information not (yet?) available or unspecified, not writing vprp header. Pos: 0.7s 21f ( 0%) 14.38fps Trem: 0min 0mb A-V:0.067 [0:1411] Skipping frame! Pos: 1.1s 33f ( 0%) 18.45fps Trem: 0min 0mb A-V:0.068 [150:1411] Skipping frame! Pos: 6.0s 182f ( 0%) 38.81fps Trem: 65min 1014mb A-V:0.067 [148:1411] Skipping frame! Pos: 23.5s 706f ( 0%) 43.90fps Trem: 70min 1142mb A-V:0.067 [106:1411] Skipping frame! Pos: 38.4s 1153f ( 0%) 44.83fps Trem: 68min 1147mb A-V:0.067 [113:1411] Skipping frame! Pos: 57.4s 1723f ( 0%) 44.84fps Trem: 66min 1117mb A-V:0.068 [124:1411] Skipping frame! Pos: 76.9s 2306f ( 1%) 44.36fps Trem: 65min 1089mb A-V:0.067 [128:1411] Skipping frame! Pos: 98.4s 2950f ( 1%) 44.17fps Trem: 65min 1092mb A-V:0.067 [126:1411] Skipping frame! Pos: 117.5s 3522f ( 1%) 43.68fps Trem: 65min 1086mb A-V:0.067 [128:1411] Skipping frame! Pos: 132.5s 3972f ( 2%) 43.76fps Trem: 66min 1092mb A-V:0.067 [127:1411] Skipping frame! Pos: 153.7s 4608f ( 2%) 44.14fps Trem: 66min 1104mb A-V:0.067 [126:1411] Skipping frame! Pos: 173.1s 5190f ( 2%) 43.84fps Trem: 68min 1133mb A-V:0.067 [120:1411] Skipping frame! Pos: 190.3s 5705f ( 3%) 44.08fps Trem: 67min 1122mb A-V:0.067 [121:1411] Skipping frame! Pos: 211.7s 6347f ( 3%) 43.80fps Trem: 66min 1114mb A-V:0.068 [124:1411] Skipping frame! Pos: 228.7s 6856f ( 3%) 43.84fps Trem: 66min 1113mb A-V:0.067 [124:1411] Skipping frame! Pos: 248.1s 7436f ( 4%) 44.06fps Trem: 65min 1110mb A-V:0.067 [125:1411] Skipping frame! Pos: 265.3s 7954f ( 4%) 43.82fps Trem: 66min 1120mb A-V:0.067 [123:1411] Skipping frame!

5 28

Help with MPG video encoding
by Walter Belhaven 20 Apr '13

20 Apr '13

Hi, I've got a question on how to get the best possible MPG encoding of a movie source, "at any price" so to speak -- i.e., as many bits as the encoder needs to get the highest possible video quality. It appears to me that the MPG encoding process is introducing artifacts that are present regardless of the amount of "free reign" I give to the encoder with respect to quantization, bitrate, and the like. My bottom line question is thus: "Are these artifacts inherent in MPG encoding, or am I just not twiddling the knobs and dials on the encoder correctly?" Here's all the details ... My source is a mixed hard- and soft-telecined "movie" at 1080/60i that I'm trying to tanscode to 480/24p, soft telecined to 480/60i, for ultimate burning to an NTSC DVD-Video. When I use mencoder to inverse telecine, crop out the crud, expand back to the original letterbox ratio (it's 2.35:1, not 16/9), and 'encode' the video with HUFFYUV (422P), the resulting video looks stunning, with no 'blocking' artifacts to speak of. This, of course, is as expected. But when I encode the video in MPG2 or MPG4, even with vqscale=1 or vqscale=2, I see sometimes severe blocking in the resulting video. Is this because the chroma is being subsampled vertically and horizontally (4:2:0), or is it because 'vqscale' is (perhaps necessary but) not sufficient to get "maximum quality at any price" encoding? Thanks, WB ____________________________________________________________________________________ Be a PS3 game guru. Get your game face on with the latest PS3 news and previews at Yahoo! Games. http://videogames.yahoo.com/platform?platform=120121

3 9

Need help to rip DVD to DivX
by Nagy Tibor 04 Dec '12

04 Dec '12

I have an LG home movie system, which can play DivX files from USB (pen drive, hard disc), but the accepted file formats are quite limited (from the manual): ---------------------------------------------------------------------------- DivX file requirement ********************** • Available resolution size: 800x600 (W x H) pixel • The file name of the DivX subtitle is available by 45 characters. • If the number of the screen frame is over 30 per 1 second, this unit may not operate normally. • If the video and audio structure of recorded files are not interleaved, either video or audio is outputted. • MPEG4 file extensions: “.avi”, “.mpg”, “.mpeg” • Playable DivX subtitle: SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha(.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub) SubViewer 2.0 (.sub/.txt), TMPlayer(.txt), DVD Subtitle System(.txt) (Files (VobSub(.sub)) included with USB device is not supported) • Playable Codec format: “DIVX3.xx”, “DIVX4.xx “, “DIVX5.xx”, “MP43”, “3IVX” • Playable Audio format: “AC3”, “DTS”, “PCM”, “MP3”, “WMA” • Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA) • Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA) ---------------------------------------------------------------------------- I'm unable to rip a DVD to a file which is accepted my LG player. Mencoder displays the following info for an accepted file: ---------------------------------------------------------------------------- $ mencoder -msglevel identify=4 input.avi -o /dev/null -oac copy -ovc copy -frames 0 MEncoder dev-SVN-r35127-4.6-openSUSE Linux 12.1 (x86_64)-Packman (C) 2000-2012 MPlayer Team success: format: 0 data: 0x0 - 0x7d7676cc libavformat version 54.25.104 (internal) AVI file format detected. ID_VIDEO_ID=0 [aviheader] Video stream found, -vid 0 ID_AUDIO_ID=1 [aviheader] Audio stream found, -aid 1 AVI: ODML: Building ODML index (2 superindexchunks). VIDEO: [XVID] 720x400 24bpp 25.000 fps 1795.1 kbps (219.1 kbyte/s) [V] filefmt:3 fourcc:0x44495658 size:720x400 fps:25.000 ftime:=0.0400 videocodec: framecopy (720x400 24bpp fourcc=44495658) audiocodec: framecopy (format=2000 chans=2 rate=48000 bits=16 B/s=48000 sample-1) Writing index... Writing header... ODML: Aspect information not (yet?) available or unspecified, not writing vprp header. ---------------------------------------------------------------------------- I try to rip my DVD with following commands: ---------------------------------------------------------------------------- mencoder dvd://1 -dvd-device /dev/sr0 \ -chapter 1-1 \ -vf crop=720:416:0:80 \ -ovc xvid \ -oac copy \ -vobsubout output_en -vobsuboutindex 0 -sid 0 \ -o /dev/null mencoder dvd://1 -dvd-device /dev/sr0 \ -chapter 1-1 \ -vf crop=720:416:0:80 \ -ovc xvid \ -oac copy \ -vobsubout output_hu -vobsuboutindex 0 -sid 2 \ -o output.avi ---------------------------------------------------------------------------- Mencoder displays the following info for this file not accepted by the LG player: ---------------------------------------------------------------------------- $ mencoder -msglevel identify=4 output.avi -o /dev/null -oac copy -ovc copy -frames 0 MEncoder dev-SVN-r35127-4.6-openSUSE Linux 12.1 (x86_64)-Packman (C) 2000-2012 MPlayer Team success: format: 0 data: 0x0 - 0x3ea3dd0 libavformat version 54.25.104 (internal) AVI file format detected. ID_VIDEO_ID=0 [aviheader] Video stream found, -vid 0 ID_AUDIO_ID=1 [aviheader] Audio stream found, -aid 1 VIDEO: [FMP4] 720x416 24bpp 25.000 fps 1634.9 kbps (199.6 kbyte/s) [V] filefmt:3 fourcc:0x34504D46 size:720x416 fps:25.000 ftime:=0.0400 videocodec: framecopy (720x416 24bpp fourcc=34504d46) audiocodec: framecopy (format=2000 chans=2 rate=48000 bits=16 B/s=48000 sample-1) Writing index... Writing header... ODML: Aspect information not (yet?) available or unspecified, not writing vprp header. ---------------------------------------------------------------------------- The main difference are in this lines: ---------------------------------------------------------------------------- AVI: ODML: Building ODML index (2 superindexchunks). VIDEO: [XVID] 720x400 24bpp 25.000 fps 1795.1 kbps (219.1 kbyte/s) VIDEO: [FMP4] 720x416 24bpp 25.000 fps 1634.9 kbps (199.6 kbyte/s) ---------------------------------------------------------------------------- How can I achive, the format above (AVI: ODML and VIDEO: [XVID])? Any help is appreciated. Tibor

2 2

Play a video and exit with MPlayer
by PyProg PyProg 20 Nov '12

20 Nov '12

Hi all, Is it possible to use MPlayer (or SMPlayer) in command line, to play a video in command line ... and when the video ends Mplayer (or SMPlayer) closes immediatly? Such as this example with VLC : vlc -f --play-and-exit video.avi I hope you can help me. I also looking for a portable version of Mplayer (and very recently version) for windows ... do you have that somewhere? a+ -- http://ekd.tuxfamily.org http://ekdm.wordpress.com http://glouk.legtux.org/guiescputil http://lcs.dunois.clg14.ac-caen.fr/~alama/blog http://www.youtube.com/user/EnKoDeurMixeur http://lprod.org/wiki/doku.php/video:encodage:avchd_converter

2 1

Re: [MEncoder-users] With time honoured always working alsa settings no more audio with mencoder...
by Miroslav Rovis 10 Nov '12

10 Nov '12

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The issue has been solved: http://lists.freedesktop.org/archives/pulseaudio-discuss/2012-November/0152… Thanks for patience everybody! Miroslav Rovis > Since the good MPLAYERHQ.HU Mplayer Headquarters, where Mplayer > started by Árpád Gereöffy, my Hungarian neighbour ( > https://en.wikipedia.org/wiki/Mplayer ) is already showing my > post: > > http://lists.mplayerhq.hu/pipermail/mencoder-users/2012-November/013228.html > > but the secret services haven't yet sifted my mail to decide what > of my mail to let me have and what not to (it's a regular treatment > that the killer's children who they are give to even tolerant > rightwingers like me), > > ((( Actually I wasn't right this time around, because I'm on > digest with mencoder at this time. But I like what I wrote, because > it is true, in many other similar occasions. ))) > > I can not reply in good order to my own post. > > I know it'll be posted in the right thread because I'll give it > the right Subject line, which is good enough for good mailing > lists... > > ### Now the tech content. > > If we look into mplayer (should have been in mencoder) archives: > http://lists.mplayerhq.hu/pipermail/mplayer-users/2009-December/subject.html > there we find the thread by the subject: [MPlayer-users] A-V sync > with mencoder/mplayer > > Starting from, say: > > http://lists.mplayerhq.hu/pipermail/mplayer-users/2009-December/078442.html > > Somewhere there, or later, or even earlier, and thanks to help > from Reimar Döffinger and others, I was able to, after days of > testing, get mencoder to fabulously :-) capture on Composite (be it > S-video or to Composite through adapters, or plain Composite, from, > usually either from S-video, Composite, or Scart inputs, so we're > talking old equipment, still just good for old footage of any > kind)... > > But I was saying, thanks to help from Mencoder crew, I was able to > capture with mencoder on Composite input of my now old Hauppauge > HVR-3000 PCI card, both video and audio, and it was the sync that > was the hurdle par excellance, like no other, bothered people later > on as well... > > The code that I still use, and is based on those findings, or > maybe later improvements, who can tell, and I'm not rummiging into > all the archives now, has stopped capturing from line-in, for > short. > > These are the relevant profiles in ~miro/.mplayer/mencoder.conf > > > [mpeg4_capt] profile-desc="mpeg4 capture" > tv=input=1:driver=v4l2:device=/dev/video0:normid=3:input=1:alsa=1:adevice=hw.0,2:audiorate=48000:amode=1:width=768:height=576 > ovc=lavc=1 #nosound=1 > lavcopts=vcodec=mpeg4:autoaspect=1:vqscale=4:vb_strategy=1:vmax_b_frames=2:mbd=0:turbo=1 > vf=softskip,harddup mc=0 > > [mpeg4_capt_MP3] profile=mpeg4_capt_MP3 oac=mp3lame=1 > lameopts=cbr=1:preset=standard > > I don't remember now why I needed to make two profiles, I remember > that just worked for all this time... with the commend (or a > previous variant of the following command): > > mencoder tv:// -profile mpeg4_capt_noAu -o Compo_`date > +C%m%d_%H%M`.avi > > I use C insted of 12 for year 2012 (because I'll be using one > digit instead of one in tens of thousands of instances, this way), > so the part: > > `date +C%m%d_%H%M` (those are the socalled backticks at beginning > and end; I always like providing extra explanations for possible > newbies to understand) > > get substituted with the current month day _ hour minute (without > blanks. two digits each), so I can make those numerous tries if I > need without having to delete/overwrite files. > > I'm not explaining all now, but the relevant for the problem that > I have. > > The line that does the audio capture setting is: > > tv=input=1:driver=v4l2:device=/dev/video0:normid=3:input=1:alsa=1:adevice=hw.0,2:audiorate=48000:amode=1:width=768:height=576 > ovc=lavc=1 > > It actually does the video and audio setting, but the audio setting > is determined with: > > input=1:alsa=1:adevice=hw.0,2:audiorate=48000:amode=1 ovc=lavc=1 > > which is in that line. > > That is the bit that doesn't work anymore. > > Now comes the pictures, moving, to the aid of the needy... > > But they are so clumsily made.... I'm sorry! > > On the other hand, I am really grasping for time like the drowning > for air... Sorry! > > This is the video: > > "Screen 2012-11-08, 19h, Alsa problem 2" No! Not anymore! Now it > reads: > > "Screen 2012-11-08, 19h, Alsa problem 2, pls see text below" > > http://www.youtube.com/watch?v=M7AZ6el8AK4 > > Note exclusively ;-) for mencoder users. Don't bother listening > after the real mess starts, which is after about 9:00, because I > forgot to switch back to microphone from line-in, and only thought > that I was taping own talk... > > Sure, there is also > > "Screen 2012-1x-xx, xxh, Alsa problem" (or part 1, Youtube should > give you that) > > The line that OTOH captures the audio fine, is: > > ffmpeg -f pulse -i default Ffm_`date +C%m%d_%H%M`.wav > > and it captures what I set ti to capture, either Line-in or Mic or > probably something else (haven't tried yet). > > My question is: > > how do I either: > > 1) configure mencoder to capture pulseaudio just like ffmpeg does > > or > > 2) get mencoder to capture audio from my Line-in in come other way > > I hope I made a much clearer now. > > Thanks people. Let's solve this issue, so mencoder can still be > used on precious VHS tapes, and other stuff. which is not going > away anytime soon, just yet, and for years to come! > > Miroslav Rovis m.rovis(a)inet.hr miro.rovis(a)gmail.com 01 660 2633 091 > 266 0202 #=== osuđen: ===# > http://www.croatiafidelis.hr/Miroslav_Rovis_politicki_progon/ #=== > pravomoćno! ===# http://www.exDeo.com > http://groups.google.com/group/croatian-news/ > http://www.youtube.com/user/miroR2 nije moj profil, ali do siečnja > 2012., a i kasnije, tamo postavljah: > http://www.youtube.com/user/prosvjednikkrcmarek Ima nešto i ovdje: > http://vimeo.com/user9621785 > http://creativecommons.org/licenses/by-nc-sa/3.0/ > -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://www.enigmail.net/ iEYEARECAAYFAlCe11MACgkQ5NaGZVDan0onDACfe73MKa5GXMElvrvVxLaM7QZe 7xYAoJci+wb9B+k0bVB0vGaqH/v547jm =1rST -----END PGP SIGNATURE-----

1 0

mplayer compilation
by Alessandro Gabbanelli 09 Nov '12

09 Nov '12

I'm trying to compile mplayer. I'm pretty newbie to compile c. I tried three different snapshots and version 1.1. The environment is windows 7 x64 compile with mingw "tdm64-gcc-4.7.1-3". ./configure --prefix=/build/mplayer/mplayer20121105 --language=en \ --enable-static \ --enable-x264 --enable-xvid --enable-faad --enable-faac --enable-mp3lame \ --confdir=./mplayer --codecsdir=./codecs \ --target=x86_64-w64-mingw32 \ --disable-unrarexec \ --disable-tv --disable-tv-bsdbt848 --disable-tv-v4l1 --disable-tv-v4l2 \ --cc=x86_64-w64-mingw32-gcc \ --host-cc=x86_64-w64-mingw32-gcc \ --ar=x86_64-w64-mingw32-ar \ --ranlib=/mingw/x86_64-w64-mingw32/bin/ranlib the outcome is always this: MPlayer interrupted by signal 11 in module: init_audio_codec - MPlayer crashed by bad usage of CPU/FPU/RAM. Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and disassembly. Details in DOCS/HTML/en/bugreports_what.html#bugreports_crash. - MPlayer crashed. This shouldn't happen. It can be a bug in the MPlayer code _or_ in your drivers _or_ in your gcc version. If you think it's MPlayer's fault, please read DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and won't help unless you provide this information when reporting a possible bug. gdb: snapshot 2012-11-02: Program received signal SIGSEGV, Segmentation fault. 0x0000000001060853 in __gdtoa (fpi=<optimized out>, be=<optimized out>, bits=0x0, kindp=0x800, mode=0, ndigits=0, decpt=0x0, rve=0x0) at c:/crossdev/src/mingw-w64-svn/mingw-w64-crt/gdtoa/gdtoa.c:630 630 c:/crossdev/src/mingw-w64-svn/mingw-w64-crt/gdtoa/gdtoa.c: No such file or directory. snapshot 2012-11-05: Program received signal SIGSEGV, Segmentation fault. 0x00000000009d4fee in decode_frame () snapshot 2012-11-06: Program received signal SIGSEGV, Segmentation fault. 0x0000000000e7506e in FcMatrixRotate () release 1.1: Program received signal SIGSEGV, Segmentation fault. 0x00000000009a3092 in vp5_parse_coeff_models () I was not able to make a correct compilation, I applied these workarounds: 1) comment //glFinish(); in configure for check opengl 2) cp osdep/getch2-win.c osdep/getch2.c 3) comment Makefile #OS_FEATURE-$(SHMEM) += osdep/shmem.c 4) add #include <direct.h> in ffmpeg/libavformat/smoothstreamingenc.c 5) manual compilation x86_64-w64-mingw32-gcc -Wall -fexceptions -c libass/ass.c -o libass/ass.o -I. x86_64-w64-mingw32-gcc -Wall -fexceptions -c libass/ass_bitmap.c -o libass/ass_bitmap.o -I. -I/local/include/freetype2 x86_64-w64-mingw32-gcc -Wall -fexceptions -c libass/ass_cache.c -o libass/ass_cache.o -I. -I/local/include/freetype2 x86_64-w64-mingw32-gcc -Wall -fexceptions -c libass/ass_drawing.c -o libass/ass_drawing.o -I. -I/local/include/freetype2 x86_64-w64-mingw32-gcc -Wall -fexceptions -c libass/ass_font.c -o libass/ass_font.o -I. -I/local/include/freetype2 x86_64-w64-mingw32-gcc -Wall -fexceptions -c libass/ass_fontconfig.c -o libass/ass_fontconfig.o -I. -I/local/include/freetype2 x86_64-w64-mingw32-gcc -Wall -fexceptions -c libass/ass_library.c -o libass/ass_library.o -I. x86_64-w64-mingw32-gcc -Wall -fexceptions -c libass/ass_parse.c -o libass/ass_parse.o -I. -I/local/include/freetype2 x86_64-w64-mingw32-gcc -Wall -fexceptions -c libass/ass_render.c -o libass/ass_render.o -I. -I/local/include/freetype2 x86_64-w64-mingw32-gcc -Wall -fexceptions -c libass/ass_render_api.c -o libass/ass_render_api.o -I. -I/local/include/freetype2 x86_64-w64-mingw32-gcc -Wall -fexceptions -c libass/ass_shaper.c -o libass/ass_shaper.o -I. -I/local/include/freetype2 x86_64-w64-mingw32-gcc -Wall -fexceptions -c libass/ass_strtod.c -o libass/ass_strtod.o -I. -I/local/include/freetype2 x86_64-w64-mingw32-gcc -Wall -fexceptions -c libass/ass_utils.c -o libass/ass_utils.o -I. -I/local/include/freetype2 x86_64-w64-mingw32-gcc -Wall -fexceptions -c osdep/glob-win.c -o osdep/glob- win.o -I. -Iffmpeg 6) add parameter to command mplayer compilation for error "undefined reference": x86_64-w64-mingw32-gcc -o mplayer command.o [..] subopt-helper.o \ \ osdep/glob-win.o \ ffmpeg/libavcodec/x86/deinterlace.o ffmpeg/libavcodec/x86/dsputil.o ffmpeg/libavcodec/x86/dsputil_mmx.o \ ffmpeg/libavcodec/x86/h264_chromamc.o ffmpeg/libavcodec/x86/h264_qpel_10bit.o ffmpeg/libavcodec/x86/h264_chromamc_10bit.o \ ffmpeg/libavcodec/x86/dsputilenc.o ffmpeg/libavcodec/x86/dsputilenc_mmx.o \ ffmpeg/libavcodec/x86/v210.o ffmpeg/libavcodec/x86/dwt_yasm.o \ ffmpeg/libavcodec/x86/h264dsp_init.o ffmpeg/libavcodec/x86/h264_idct_10bit.o \ ffmpeg/libavcodec/x86/h264_weight_10bit.o ffmpeg/libavcodec/x86/h264_deblock_10bit.o\ ffmpeg/libavcodec/x86/h264_idct.o ffmpeg/libavcodec/x86/h264_deblock.o \ ffmpeg/libavcodec/x86/h264_weight.o ffmpeg/libavcodec/x86/h264_intrapred_init.o\ ffmpeg/libavcodec/x86/h264_intrapred_10bit.o ffmpeg/libavcodec/x86/h264_intrapred.o\ ffmpeg/libavcodec/x86/diracdsp_yasm.o ffmpeg/libavcodec/x86/vc1dsp_init.o ffmpeg/libavcodec/x86/vc1dsp.o \ ffmpeg/libavcodec/x86/pngdsp_init.o ffmpeg/libavcodec/x86/pngdsp.o \ ffmpeg/libavcodec/x86/proresdsp_init.o ffmpeg/libavcodec/x86/proresdsp.o \ ffmpeg/libavcodec/x86/vp3dsp.o \ ffmpeg/libavcodec/x86/vp8dsp.o \ ffmpeg/libavcodec/x86/fmtconvert.o \ ffmpeg/libavcodec/x86/ac3dsp.o \ ffmpeg/libavcodec/x86/fft.o \ ffmpeg/libavcodec/x86/dct32.o \ ffmpeg/libavcodec/x86/imdct36.o \ ffmpeg/libavcodec/x86/rv40dsp.o \ ffmpeg/libavcodec/x86/sbrdsp.o ffmpeg/libavcodec/x86/vp56dsp.o ffmpeg/libavcodec/x86/rv34dsp.o \ ffmpeg/libswscale/x86/scale.o ffmpeg/libswscale/x86/swscale.o ffmpeg/libswscale/x86/output.o ffmpeg/libswscale/x86/input.o \ ffmpeg/libavutil/x86/cpuid.o ffmpeg/libavutil/x86/float_dsp.o \ libass/ass.o libass/ass_library.o libass/ass_render_api.o libass/ass_render.o libass/ass_utils.o \ libass/ass_strtod.o libass/ass_cache.o libass/ass_fontconfig.o libass/ass_bitmap.o libass/ass_shaper.o \ libass/ass_drawing.o libass/ass_parse.o libass/ass_font.o \ \ libaf/af.o [..] ffmpeg/libavutil/libavutil.a \ \ /local/lib/xvidcore.a /local/lib/libfaac.a /local/lib/libx264.a /local/lib/ libpthreadGC2.a \ /C/Program\ Files/Microsoft\ SDKs/Windows/v7.1/Lib/x64/OpenGL32.Lib \ \ -Wl,--nxcompat [..] please help:)

3 2

Re: [MEncoder-users] With time honoured always working alsa settings no more audio with mencoder...
by Miroslav Rovis 09 Nov '12

09 Nov '12

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Since the good MPLAYERHQ.HU Mplayer Headquarters, where Mplayer started by Árpád Gereöffy, my Hungarian neighbour ( https://en.wikipedia.org/wiki/Mplayer ) is already showing my post: http://lists.mplayerhq.hu/pipermail/mencoder-users/2012-November/013228.html but the secret services haven't yet sifted my mail to decide what of my mail to let me have and what not to (it's a regular treatment that the killer's children who they are give to even tolerant rightwingers like me), ((( Actually I wasn't right this time around, because I'm on digest with mencoder at this time. But I like what I wrote, because it is true, in many other similar occasions. ))) I can not reply in good order to my own post. I know it'll be posted in the right thread because I'll give it the right Subject line, which is good enough for good mailing lists... ### Now the tech content. If we look into mplayer (should have been in mencoder) archives: http://lists.mplayerhq.hu/pipermail/mplayer-users/2009-December/subject.html there we find the thread by the subject: [MPlayer-users] A-V sync with mencoder/mplayer Starting from, say: http://lists.mplayerhq.hu/pipermail/mplayer-users/2009-December/078442.html Somewhere there, or later, or even earlier, and thanks to help from Reimar Döffinger and others, I was able to, after days of testing, get mencoder to fabulously :-) capture on Composite (be it S-video or to Composite through adapters, or plain Composite, from, usually either from S-video, Composite, or Scart inputs, so we're talking old equipment, still just good for old footage of any kind)... But I was saying, thanks to help from Mencoder crew, I was able to capture with mencoder on Composite input of my now old Hauppauge HVR-3000 PCI card, both video and audio, and it was the sync that was the hurdle par excellance, like no other, bothered people later on as well... The code that I still use, and is based on those findings, or maybe later improvements, who can tell, and I'm not rummiging into all the archives now, has stopped capturing from line-in, for short. These are the relevant profiles in ~miro/.mplayer/mencoder.conf [mpeg4_capt] profile-desc="mpeg4 capture" tv=input=1:driver=v4l2:device=/dev/video0:normid=3:input=1:alsa=1:adevice=hw.0,2:audiorate=48000:amode=1:width=768:height=576 ovc=lavc=1 #nosound=1 lavcopts=vcodec=mpeg4:autoaspect=1:vqscale=4:vb_strategy=1:vmax_b_frames=2:mbd=0:turbo=1 vf=softskip,harddup mc=0 [mpeg4_capt_MP3] profile=mpeg4_capt_MP3 oac=mp3lame=1 lameopts=cbr=1:preset=standard I don't remember now why I needed to make two profiles, I remember that just worked for all this time... with the commend (or a previous variant of the following command): mencoder tv:// -profile mpeg4_capt_noAu -o Compo_`date +C%m%d_%H%M`.avi I use C insted of 12 for year 2012 (because I'll be using one digit instead of one in tens of thousands of instances, this way), so the part: `date +C%m%d_%H%M` (those are the socalled backticks at beginning and end; I always like providing extra explanations for possible newbies to understand) get substituted with the current month day _ hour minute (without blanks. two digits each), so I can make those numerous tries if I need without having to delete/overwrite files. I'm not explaining all now, but the relevant for the problem that I have. The line that does the audio capture setting is: tv=input=1:driver=v4l2:device=/dev/video0:normid=3:input=1:alsa=1:adevice=hw.0,2:audiorate=48000:amode=1:width=768:height=576 ovc=lavc=1 It actually does the video and audio setting, but the audio setting is determined with: input=1:alsa=1:adevice=hw.0,2:audiorate=48000:amode=1 ovc=lavc=1 which is in that line. That is the bit that doesn't work anymore. Now comes the pictures, moving, to the aid of the needy... But they are so clumsily made.... I'm sorry! On the other hand, I am really grasping for time like the drowning for air... Sorry! This is the video: "Screen 2012-11-08, 19h, Alsa problem 2" No! Not anymore! Now it reads: "Screen 2012-11-08, 19h, Alsa problem 2, pls see text below" http://www.youtube.com/watch?v=M7AZ6el8AK4 Note exclusively ;-) for mencoder users. Don't bother listening after the real mess starts, which is after about 9:00, because I forgot to switch back to microphone from line-in, and only thought that I was taping own talk... Sure, there is also "Screen 2012-1x-xx, xxh, Alsa problem" (or part 1, Youtube should give you that) The line that OTOH captures the audio fine, is: ffmpeg -f pulse -i default Ffm_`date +C%m%d_%H%M`.wav and it captures what I set ti to capture, either Line-in or Mic or probably something else (haven't tried yet). My question is: how do I either: 1) configure mencoder to capture pulseaudio just like ffmpeg does or 2) get mencoder to capture audio from my Line-in in come other way I hope I made a much clearer now. Thanks people. Let's solve this issue, so mencoder can still be used on precious VHS tapes, and other stuff. which is not going away anytime soon, just yet, and for years to come! Miroslav Rovis m.rovis(a)inet.hr miro.rovis(a)gmail.com 01 660 2633 091 266 0202 #=== osuđen: ===# http://www.croatiafidelis.hr/Miroslav_Rovis_politicki_progon/ #=== pravomoćno! ===# http://www.exDeo.com http://groups.google.com/group/croatian-news/ http://www.youtube.com/user/miroR2 nije moj profil, ali do siečnja 2012., a i kasnije, tamo postavljah: http://www.youtube.com/user/prosvjednikkrcmarek Ima nešto i ovdje: http://vimeo.com/user9621785 http://creativecommons.org/licenses/by-nc-sa/3.0/ -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://www.enigmail.net/ iEYEARECAAYFAlCcUtwACgkQ5NaGZVDan0o6YgCghLYfwrNcEavoJPPS7+0fuiMo W+QAoLIeegzkxyVdKU+Oho9mE+V2zwDj =Z3vA -----END PGP SIGNATURE-----

1 0

Re: [MEncoder-users] With time honoured always working alsa settings no more audio with mencoder...
by Miroslav Rovis 08 Nov '12

08 Nov '12

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > On 04/11/12 14:31, Carl Eugen Hoyos wrote: >> Miroslav Rovis <m.rovis <at> inet.hr> writes: >> >>> Pls., anyone, don't mind my talkativeness >> >> On the contrary: At least I will not follow links into different >> forums (and from a very quick look, I was unable to find out what >> goes wrong: On ffmpeg-user, you reported an audio problem, how is >> that related to mencoder?), please post all necessary information >> here. >> >> If your problem is also reproducible with mplayer, please post on >> mplayer-users. >> >> Sorry, Carl Eugen It's OK. I didn't mean to break any rules. A quick note: only now do I find this e-mail. Poor eyesight and very poor monitors problem. would have replied earlier otherwise. I only thought it would have been cross-posting to copy things that are already explained somewhere. I can try and isolate the problem. As first thing, I don't think it could properly appy to mplayer itself, because it really is about capturing not only the video, but also the audio. I did alsto report the problem on ffmpeg list, because I ususally (not the GNU Linux way anyway) don't search for osolution in single direction... There is also the problem of mine in the second (very clumsy) video, and I did report that video on ffmpeg list. I guess I had better accept to try and post my problem here from the beginning. But allow me make it in the next post, pls! Miroslav Rovis -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://www.enigmail.net/ iEYEARECAAYFAlCcQfkACgkQ5NaGZVDan0oFPACdGM94kwhWAEhbLY4ZmYK7yne6 Uz4AnAnKEY6APbd6BckE8q6fxeuTynKl =Ycrp -----END PGP SIGNATURE-----

1 0

With time honoured always working alsa settings no more audio with mencoder...
by Miroslav Rovis 04 Nov '12

04 Nov '12

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have posted this issue in different places. If if doesn't solve itself with update and re-emerge (Gentoo GNU Linux here), I might languish without solution. It just always worked until this update. It's one of the very few things that don't yet work, pls hold back the evil grin, anybody! This is the update: http://forums.gentoo.org/viewtopic-p-7175644.html where feel free to search for mencoder, to find my issue, pls. There already are the other links where I'm posting this enigma that is wasting my long hours of its own difficulty. And those are in bottom of that post at the current time. I'm pasting just those links over: http://ffmpeg.org/pipermail/ffmpeg-user/2012-November/010896.html http://sourceforge.net/mailarchive/forum.php?thread_name=509334CB.2060402%4… The issue is the time-honoured, still seemingly the slickyest and finest way for grabbing or capturing if you prefer, the composite input on old Hauppauge PCI cards, one of the last things PCI on my new hardware... I'll be missing those! Just as the DVD drives, the CD and DVD media and things, but hey, the world is a changing... Pls., anyone, don't mind my talkativeness, see the difficulty of the no sound issue with mencoder, and point me in the right direction to solve this issue, if you can! On my part, I'll try and remember to post the solution, so others with similar issue get some help from my experience! Thanx! Miroslav Rovis -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://www.enigmail.net/ iEYEARECAAYFAlCTPykACgkQ5NaGZVDan0paTwCfc53HE+8RPPMA1ZC0PIV6FMek toQAnRoyoJx9l+D14hsjVELEuRpCnqXU =jfM2 -----END PGP SIGNATURE-----

2 1