Neptune main # gdb ./mplayer GNU gdb 5.3 Copyright 2002 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i686-pc-linux-gnu"... (gdb) run -v ~/Videos/TEST/sims2_80.vp6 Starting program: /home/root/temp/MPlayer/test-CVS2004Sep11/main/mplayer -v ~/Videos/TEST/sims2_80.vp6 [New Thread 16384 (LWP 30476)] MPlayer dev-CVS-040911-04:32-3.2.2 (C) 2000-2004 MPlayer Team CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred 1480 MHz (Family: 6, Stepping: 1) Detected cache-line size is 64 bytes CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0 Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE Reading config file /usr/local/etc/mplayer/mplayer.conf Reading config file /home/root/.mplayer/config Reading /home/root/.mplayer/codecs.conf: Can't open '/home/root/.mplayer/codecs.conf': No such file or directory Reading /usr/local/etc/mplayer/codecs.conf: Can't open '/usr/local/etc/mplayer/codecs.conf': No such file or directory Using built-in default codecs.conf. CommandLine: '-v' '/home/root/Videos/TEST/sims2_80.vp6' init_freetype get_path('font/font.desc') -> '/home/root/.mplayer/font/font.desc' font: can't open file: /home/root/.mplayer/font/font.desc font: can't open file: /usr/local/share/mplayer/font/font.desc Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay Using Linux hardware RTC timing (1024Hz). get_path('input.conf') -> '/home/root/.mplayer/input.conf' Parsing input config file /home/root/.mplayer/input.conf Input config file /home/root/.mplayer/input.conf parsed: 52 binds Setting up LIRC support... get_path('sims2_80.vp6.conf') -> '/home/root/.mplayer/sims2_80.vp6.conf' Playing /home/root/Videos/TEST/sims2_80.vp6. [file] File size is 2077984 bytes STREAM: [file] /home/root/Videos/TEST/sims2_80.vp6 STREAM: Description: File STREAM: Author: Albeu STREAM: Comment: based on the code from ??? (probably Arpi) CACHE_PRE_INIT: 0 [0] 0 pre:0 eof:0 Cache fill: 19.82% (2077984 bytes) AVI file format detected. list_end=0x20A ======= AVI Header ======= us/frame: 66666 (fps=15.000) max bytes/sec: 0 padding: 0 MainAVIHeader.dwFlags: (272) HAS_INDEX IS_INTERLEAVED frames total: 6314 initial: 0 streams: 2 Suggested BufferSize: 6323 Size: 192 x 144 ========================== list_end=0x134 ==> Found video stream: 0 ====== STREAM Header ===== Type: vids FCC: VP62 (32365056) Flags: 0 Priority: 0 Language: 0 InitialFrames: 0 Rate: 500000/33333 = 15.000 Start: 0 Len: 2048 Suggested BufferSize: 6323 Quality -1 Sample size: 0 ========================== found 'bih', 40 bytes of 40 ======= VIDEO Format ====== biSize 40 biWidth 192 biHeight 144 biPlanes 1 biBitCount 12 biCompression 842420310='VP62' biSizeImage 41472 =========================== ====== AVI Super Index Header ======== FCC (indx) dwSize (40) wLongsPerEntry(4) bIndexSubType (0) bIndexType (0) nEntriesInUse (1) dwChunkId (00dc) dwReserved[0] (0) dwReserved[1] (0) dwReserved[2] (0) =========================== ODML (00dc): [0] 0x00000000001d64e8 0x4020 2048 list_end=0x20A ==> Found audio stream: 1 ====== STREAM Header ===== Type: auds FCC: (0) Flags: 0 Priority: 0 Language: 0 InitialFrames: 0 Rate: 32000/1024 = 31.250 Start: 0 Len: 4266 Suggested BufferSize: 232 Quality -1 Sample size: 0 ========================== found 'wf', 34 bytes of 18 ======= WAVE Format ======= Format Tag: 1281 (0x501) Channels: 2 Samplerate: 32000 avg byte/sec: 4000 Block align: 0 bits/sample: 16 cbSize: 16 Unknown extra header dump: [0] [4] [1] [0] [0] [0] [0] [0] [0] [7d] [0] [0] [0] [0] [0] [0] =========================== ====== AVI Super Index Header ======== FCC (indx) dwSize (40) wLongsPerEntry(4) bIndexSubType (0) bIndexType (0) nEntriesInUse (1) dwChunkId (01wb) dwReserved[0] (0) dwReserved[1] (0) dwReserved[2] (0) =========================== ODML (01wb): [0] 0x00000000001da508 0x8570 4266 list_end=0x1E2A78 Found movie at 0x800 - 0x1E2A78 Reading INDEX block, 6314 chunks for 6314 frames (fpos=0x1e2a80) AVI index offset: 0x7FC (movi=0x800 idx0=0x4 idx1=0x860) Auto-selected AVI video ID = 0 Auto-selected AVI audio ID = 1 AVI: Searching for audio stream (id:1) XXX initial v_pts=0.000 a_pos=0 (0.000) AVI video size=1368342 (2048) audio size=502284 (502284) VIDEO: [VP62] 192x144 12bpp 15.000 fps 80.2 kbps ( 9.8 kbyte/s) [V] filefmt:3 fourcc:0x32365056 size:192x144 fps:15.00 ftime:=0.0667 get_path('sub/') -> '/home/root/.mplayer/sub/' get_path('default.sub') -> '/home/root/.mplayer/default.sub' ========================================================================== Cannot find codec for audio format 0x501. Read DOCS/HTML/en/codecs.html! ========================================================================== X11 opening display: localhost:10.0 vo: X11 color mask: FFFF (R:F800 G:7E0 B:1F) vo: X11 running at 1024x768 with depth 16 and 16 bpp (":10.0" => remote display) [x11] Detected wm supports NetWM. [x11] Detected wm supports FULLSCREEN state. [x11] Current fstype setting doesn't honour any X atoms ========================================================================== Opening video decoder: [vfwex] Win32/VfWex video codecs ======= Win32 (VFW) VIDEO Codec init ======= Loading codec DLL: 'vp6vfw.dll' Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 16384 (LWP 30476)] 0x1003fa04 in ?? () (gdb) disassemble extend_stack_for_dll_alloca Dump of assembler code for function extend_stack_for_dll_alloca: 0x81331a0 : push %ebp 0x81331a1 : mov %esp,%ebp 0x81331a3 : sub $0x20008,%esp 0x81331a9 : movl $0x1234,(%esp,1) 0x81331b0 : leave 0x81331b1 : ret End of assembler dump. (gdb) disassemble PE_InitDLL Dump of assembler code for function PE_InitDLL: 0x8132e10 : push %ebp 0x8132e11 : mov %esp,%ebp 0x8132e13 : sub $0x18,%esp 0x8132e16 : mov %ebx,0xfffffff8(%ebp) 0x8132e19 : mov %esi,0xfffffffc(%ebp) 0x8132e1c : mov 0x8(%ebp),%ebx 0x8132e1f : mov $0x1,%esi 0x8132e24 : cmpl $0x1,0x8(%ebx) 0x8132e28 : jne 0x8132ea8 0x8132e2a : mov 0x1c(%ebx),%edx 0x8132e2d : mov 0x3c(%edx),%ecx 0x8132e30 : movzwl 0x16(%ecx,%edx,1),%eax 0x8132e35 : and $0x2000,%eax 0x8132e3a : test %ax,%ax 0x8132e3d : je 0x8132e47 0x8132e3f : mov 0x28(%ecx,%edx,1),%eax 0x8132e43 : test %eax,%eax 0x8132e45 : jne 0x8132e51 0x8132e47 : mov %esi,%eax 0x8132e49 : mov 0xfffffff8(%ebp),%ebx 0x8132e4c : mov 0xfffffffc(%ebp),%esi 0x8132e4f : leave ---Type to continue, or q to quit--- 0x8132e50 : ret 0x8132e51 : movl $0x0,0x8(%esp,1) 0x8132e59 : movl $0x8461080,0x4(%esp,1) 0x8132e61 : mov %ebx,(%esp,1) 0x8132e64 : call 0x8132410 0x8132e69 : test %eax,%eax 0x8132e6b : mov %eax,%edx 0x8132e6d : je 0x8132e9a 0x8132e6f : mov 0x1c(%ebx),%ecx 0x8132e72 : mov 0x10(%ebp),%eax 0x8132e75 : sub $0x20000,%esp 0x8132e7b : movl $0x1234,0x10(%esp,1) 0x8132e83 : mov %ecx,(%esp,1) 0x8132e86 : mov %eax,0x8(%esp,1) 0x8132e8a : mov 0xc(%ebp),%eax 0x8132e8d : mov %eax,0x4(%esp,1) 0x8132e91 : call *%edx 0x8132e93 : sub $0xc,%esp 0x8132e96 : mov %eax,%esi 0x8132e98 : jmp 0x8132e47 0x8132e9a : mov 0x1c(%ebx),%ecx 0x8132e9d : mov 0x3c(%ecx),%eax 0x8132ea0 : mov %ecx,%edx ---Type to continue, or q to quit--- 0x8132ea2 : add 0x28(%eax,%ecx,1),%edx 0x8132ea6 : jmp 0x8132e72 0x8132ea8 : movl $0x8461088,0xc(%esp,1) 0x8132eb0 : movl $0x393,0x8(%esp,1) 0x8132eb8 : movl $0x8461093,0x4(%esp,1) 0x8132ec0 : movl $0x846109e,(%esp,1) 0x8132ec7 : call 0x806d228 <__assert_fail> End of assembler dump. (gdb) continue Continuing. MPlayer interrupted by signal 11 in module: init_video_codec - MPlayer crashed by bad usage of CPU/FPU/RAM. Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and disassembly. Details in DOCS/HTML/en/bugreports_what.html#bugreports_crash. - MPlayer crashed. This shouldn't happen. It can be a bug in the MPlayer code _or_ in your drivers _or_ in your gcc version. If you think it's MPlayer's fault, please read DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and won't help unless you provide this information when reporting a possible bug. DEMUXER: freeing demuxer at 0x85dce60 vo: uninit ... Program exited with code 01. (gdb) quit