MPlayer CVS-020925-08:00-2.95.4 (C) 2000-2002 Arpad Gereoffy (see DOCS)

CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Family: 6, Stepping: 6)
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 SSE

Reading /root/.mplayer/codecs.conf: Reading /usr/local/etc/mplayer/codecs.conf: 38 audio & 106 video codecs
CommandLine: '-vo' 'vesa:vidix' '-v' '/movies/BEATLES-HEY_JUDE.mpeg'
get_path('font/font.desc') -> '/root/.mplayer/font/font.desc'
font: can't open file: /root/.mplayer/font/font.desc
Font /usr/local/share/mplayer/font/font.desc loaded successfully! (495 chars)
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Using Linux hardware RTC timing (1024Hz)
get_path('input.conf') -> '/root/.mplayer/input.conf'

Playing /windows/movies/BEATLES-HEY_JUDE.mpeg
Not an URL!
File size is 67368960 bytes
Checking for YUV4MPEG2
DEMUXER: freeing demuxer at 0x83f63e8  
ASF_check: not ASF guid!
DEMUXER: freeing demuxer at 0x83f63e8  
Checking for NuppelVideo
DEMUXER: freeing demuxer at 0x83f63e8  
Checking for MOV
DEMUXER: freeing demuxer at 0x83f63e8  
Checking for VIVO
header block 1 size: 0
DEMUXER: freeing demuxer at 0x83f63e8  
Checking for REAL
DEMUXER: freeing demuxer at 0x83f63e8  
DEMUXER: freeing demuxer at 0x83f63e8  
DEMUXER: freeing demuxer at 0x83f63e8  
DEMUXER: freeing demuxer at 0x83f63e8  
DEMUXER: freeing demuxer at 0x83f63e8  
Checking for SMJPEG
DEMUXER: freeing demuxer at 0x83f63e8  
Checking for PVA
DEMUXER: freeing demuxer at 0x83f6c50  
system stream synced at 0xB (0)!
==> Found video stream: 0
Detected MPEG-PS file format!
==> Found audio stream: 0
Searching for sequence header... OK!
VIDEO:  MPEG1  352x240  (aspect 12)  29.97 fps  1437.5 kbps (179.7 kbyte/s)
[V] filefmt:2  fourcc:0x10000001  size:352x240  fps:29.97  ftime:=0.0334
get_path('sub/') -> '/root/.mplayer/sub/'
==========================================================================
Detected audio codec: [ffmp2] afm:ffmpeg (FFmpeg layer 1,2 audio decoder - integer only)
Initializing audio codec...
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
dec_audio: Allocating 18432 + 65536 = 83968 bytes for output buffer
FFmpeg's libavcodec audio codec
INFO: libavcodec init OK!
AUDIO: 44100 Hz, 2 ch, sfmt: 0x10 (2 bps), ratio: 24000->176400 (192.0 kbit)
vidixlib: PROBING: /usr/local/lib/mplayer/vidix/rage128_vid.so
Rage128_vid: Found chip: Rage 128 RF/SG AGP
vidixlib: /usr/local/lib/mplayer/vidix/rage128_vid.so probed o'k
vidixlib: will use /usr/local/lib/mplayer/vidix/rage128_vid.so driver
vidixlib: Attempt to initialize driver at: 0x407c5cd0
Rage128_vid: Video memory = 32Mb
Rage128_vid: Set write-combining type of video memory
vidixlib: '/usr/local/lib/mplayer/vidix/rage128_vid.so'successfully loaded
VIDIX: Description: BES driver for rage128 cards
VIDIX: Author: Nick Kurshev
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 352 x 240 (preferred csp: Mpeg PES)
VDec: using Mpeg PES as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
VO Config (352x240->352x264,flags=0,'MPlayer',0x4D504553)
VO: [vesa] 352x240 => 352x264 Mpeg PES 
VO: Description: VESA VBE 2.0 video output
VO: Author: Nick Kurshev <nickols_k@mail.ru>
VO: Comment: Requires ROOT privileges
[?25lvo_vesa: Found VESA VBE BIOS Version 2.0 Revision: 100
vo_vesa: Video memory: 32768 Kb
vo_vesa: VESA Capabilities: 8-bit DAC, VGA CRTC, normal RAMDAC, no stereoscopic, no stereo
vo_vesa: !!! Below will be printed OEM info. !!!
vo_vesa: You should watch 5 OEM related lines below else you've broken vm86
vo_vesa: OEM info: ATI RAGE128
vo_vesa: OEM Revision: 100
vo_vesa: OEM vendor: ATI Technologies Inc.
vo_vesa: OEM Product Name: R128
vo_vesa: OEM Product Rev: 01.00
vo_vesa: Hint: To get workable TV-Out you should have plugged tv-connector in
vo_vesa: before booting PC since VESA BIOS initializes itself only during POST
vo_vesa: Requested mode: 352x240@16 (Mpeg PES)
vo_vesa: Total modes found: 56
........
vo_vesa: Initial video mode: 4003
vo_vesa: Using VESA mode (15) = 1a4 [400x300@16]
vo_vesa: Using DGA (physical resources: D4000000h, 02000000h) at 42812000h
vo_vesa: Can use up to 139 video buffers
vo_vesa: image: 352x240 screen = 400x300 x_offset = 24 y_offset = 30
vo_vesa: Graphics mode was activated
vosub_vidix: unsupported fourcc for this vidix driver: 4d504553 (Mpeg PES)
vo_vesa: Can't initialize VIDIX driver
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder v2.0
libmpeg2: Using MMXEXT for IDCT transform
libmpeg2: Using MMXEXT for motion compensation
VDec: vo config request - 352 x 240 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
VO Config (352x240->352x264,flags=0,'MPlayer',0x32315659)
VO: [vesa] 352x240 => 352x264 Planar YV12 
VO: Description: VESA VBE 2.0 video output
VO: Author: Nick Kurshev <nickols_k@mail.ru>
VO: Comment: Requires ROOT privileges
[?25lvo_vesa: Found VESA VBE BIOS Version 2.0 Revision: 100
vo_vesa: Video memory: 32768 Kb
vo_vesa: VESA Capabilities: 8-bit DAC, VGA CRTC, normal RAMDAC, no stereoscopic, no stereo
vo_vesa: !!! Below will be printed OEM info. !!!
vo_vesa: You should watch 5 OEM related lines below else you've broken vm86
vo_vesa: OEM info: ATI RAGE128
vo_vesa: OEM Revision: 100
vo_vesa: OEM vendor: ATI Technologies Inc.
vo_vesa: OEM Product Name: R128
vo_vesa: OEM Product Rev: 01.00
vo_vesa: Hint: To get workable TV-Out you should have plugged tv-connector in
vo_vesa: before booting PC since VESA BIOS initializes itself only during POST
vo_vesa: Requested mode: 352x240@16 (Planar YV12)
vo_vesa: Total modes found: 56
vo_vesa: Initial video mode: 4003
............
vo_vesa: Using VESA mode (15) = 1a4 [400x300@16]
Using MMX2 for colorspace transform
SwScaler: using unscaled Planar YV12 -> BGR 16-bit special converter
vo_vesa: Using SW BES emulator
vo_vesa: Using DGA (physical resources: D4000000h, 02000000h) at 42812000h
vo_vesa: Can use up to 139 video buffers
vo_vesa: image: 352x240 screen = 400x300 x_offset = 24 y_offset = 30
vo_vesa: Graphics mode was activated
vo_vesa: VESA initialization complete
Detected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2)
==========================================================================
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: Description: OSS/ioctl audio output
AO: Author: A'rpi
ao2: 44100 Hz  2 chans  Signed 16-bit (Little-Endian)
audio_setup: using '/dev/dsp' dsp device
audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian))
audio_setup: using 2 channels (requested: 2)
audio_setup: using 44100 Hz samplerate (requested: 44100)
audio_setup: frags: 128/128  (1024 bytes/frag)  free: 131072
Start playing...
*** [vo] Allocating mp_image_t, 352x240x12bpp YUV planar, 126720 bytes
A:   0.3 V:   0.3 A-V: -0.009 ct:  0.000    1/  1   0%  0%  0.0% 0 0 0%
*** [vo] Allocating mp_image_t, 352x240x12bpp YUV planar, 126720 bytes
vosub_vidix: Error unoptimized draw_slice was called
Exiting...