Hello,

first of all congratulations to your outstanding work! The
Mplayer/mencoder are very good programs!

I have the same problem with the gui. On Gnome 1.4 it doesn't work (see bugreport below), 
but in kde3 it works without prblems.That's since 0.90pre5 (or since a version between pre4
and pre5?). In Gnome, Mplayer just crashes, when starting in gui mode (mplayer
-gui or gmplayer). In normal mode everything works fine. I tried
different Skins and Fonts already.

Here information on my system:
SuSE Linux 8.0 (oficially updated)
kernel version: Linux lapp31000 2.4.18-4GB #1 Thu Jul 18 00:47:17 CEST 2002 i686 unknown
libc version: -rwxr-xr-x    1 root     root      1394238 Mar 23 19:34 /lib/libc.so.6
X version: XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is newer than
the above date, look for a newer version before reporting problems. (See
http://www.XFree86.Org/) Build Operating System: SuSE Linux [ELF] SuSE
Module Loader present

gcc and ld versions: Reading specs from /usr/lib/gcc-lib/i486-suse-linux/2.95.3/specs
gcc version 2.95.3 20010315 (SuSE)
GNU ld version 2.11.92.0.10 20011021 (SuSE)

binutils version: GNU assembler version 2.11.92.0.10 (i486-suse-linux)
using BFD version 2.11.92.0.10 20011021 (SuSE)


GTK-Version: 1.2.10-284
glib-Version: 1.2.10-205
libpng-Version: 2.1.0.12-105
GUI-Situation: No other Programs run (only Gnome 1.4)
Before anything graphical from gmplayer is displayed it crashes

CPU-Info:
processor       : 0 vendor_id       : GenuineIntel cpu family      : 6
model           : 8
model name      : Pentium III (Coppermine)
stepping        : 10
cpu MHz         : 999.362
cache size      : 256 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips        : 1992.29

Hardware-Info:
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 	82443BX/ZX/DX Host
	bridge (rev 03) Control: I/O- Mem+ BusMaster+ 	SpecCycle-
	MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status:
	Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
	<MAbort- >SERR- <PERR- Latency: 64 Region 0: Memory at f8000000
	(32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 1.0 	
		Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 		Command: RQ=0
		SBA- AGP- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 128
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: fc100000-fdffffff
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+

00:04.0 Multimedia audio controller: ESS Technology ES1988 Allegro-1 (rev 12)
	Subsystem: FIRST INTERNATIONAL Computer Inc: Unknown device 1740
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (500ns min, 6000ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: I/O ports at 1400 [size=256]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:06.0 Communication controller: Ambient Technologies Inc: Unknown device 4000 (rev 02)
	Subsystem: Unknown device 16be:0001
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at fc000000 (32-bit, non-prefetchable) [disabled] [size=4K]
	Region 1: I/O ports at 1800 [disabled] [size=256]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-

00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Region 4: I/O ports at 1080 [size=16]

00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Interrupt: pin D routed to IRQ 5
	Region 4: I/O ports at 1060 [size=32]

00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin ? routed to IRQ 9

00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
	Subsystem: Realtek Semiconductor Co., Ltd. RT8139
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at 1c00 [size=256]
	Region 1: Memory at fc001000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.0 CardBus bridge: Texas Instruments PCI1420
	Subsystem: FIRST INTERNATIONAL Computer Inc: Unknown device 1760
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, cache line size 08
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
	Memory window 0: 10400000-107ff000 (prefetchable)
	Memory window 1: 10800000-10bff000
	I/O window 0: 00004000-000040ff
	I/O window 1: 00004400-000044ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

00:0c.1 CardBus bridge: Texas Instruments PCI1420
	Subsystem: FIRST INTERNATIONAL Computer Inc: Unknown device 1760
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, cache line size 08
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
	Memory window 0: 10c00000-10fff000 (prefetchable)
	Memory window 1: 11000000-113ff000
	I/O window 0: 00004800-000048ff
	I/O window 1: 00004c00-00004cff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) (prog-if 00 [VGA])
	Subsystem: FIRST INTERNATIONAL Computer Inc: Unknown device 1730
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 66 (2000ns min), cache line size 08
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: I/O ports at 2000 [size=256]
	Region 2: Memory at fc100000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [50] AGP version 1.0
		Status: RQ=255 SBA+ 64bit- FW- Rate=x1,x2
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
	Capabilities: [5c] Power Management version 1
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Video-Driver-type: LoadModule: "ati"
Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
Module ati: vendor="The XFree86 Project"
compiles for 4.2.0, module version = 6.4.7
Module class: XFree 86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) ATI: ATI driver (version 6.4.7) for chipsets: ati, ativga (II)
R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI), 	ATI Rage
	128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI), 	ATI
	Rage 128 RL (AGP), ATI Rage 128 SM (AGP), 	ATI Rage 128 Pro PD
	(PCI), ATI Rage 128 Pro PF (AGP), 	ATI Rage 128 Pro PP (PCI),
	ATI Rage 128 Pro PR (PCI), 	ATI Rage 128 Pro ULTRA TF (AGP), ATI
	Rage 128 Pro ULTRA TL (AGP), 	ATI Rage 128 Pro ULTRA TR (AGP),
	ATI Rage 128 Mobility LE (PCI), 	ATI Rage 128 Mobility LF (AGP),
	ATI Rage 128 Mobility MF (AGP), 	ATI Rage 128 Mobility ML
	(AGP) (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD
(AGP), 	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),

	ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
	ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LY (AGP),
	ATI Radeon Mobility LZ (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 8500 BB (AGP), ATI Radeon 7500 QW (AGP)
(II) Primary Device is: PCI 01:00:0
(II) ATI:  Candidate "Device" section "Device[0]".
(II) ATI:  Shared PCI/AGP Mach64 in slot 1:0:0 detected.
(II) ATI:  Shared PCI/AGP Mach64 in slot 1:0:0 assigned to active "Device" section "Device[0]".
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0xfc001000 - 0xfc0010ff (0x100) MX[B]
	[6] -1	0xf8000000 - 0xfbffffff (0x4000000) MX[B]
	[7] -1	0xfc100000 - 0xfc100fff (0x1000) MX[B](B)
	[8] -1	0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
	[9] -1	0xfc000000 - 0xfc000fff (0x1000) MX[B]
	[10] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[11] -1	0x00000000 - 0x000000ff (0x100) IX[B]
	[12] -1	0x00001c00 - 0x00001cff (0x100) IX[B]
	[13] -1	0x00001060 - 0x0000107f (0x20) IX[B]
	[14] -1	0x00001080 - 0x0000108f (0x10) IX[B]
	[15] -1	0x00001400 - 0x000014ff (0x100) IX[B]
	[16] -1	0x00002000 - 0x000020ff (0x100) IX[B](B)
	[17] -1	0x00001800 - 0x000018ff (0x100) IX[B]
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 6.4.7
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.5
(II) resource ranges after probing:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0xfc001000 - 0xfc0010ff (0x100) MX[B]
	[6] -1	0xf8000000 - 0xfbffffff (0x4000000) MX[B]
	[7] -1	0xfc100000 - 0xfc100fff (0x1000) MX[B](B)
	[8] -1	0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
	[9] -1	0xfc000000 - 0xfc000fff (0x1000) MX[B]
	[10] 0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[11] 0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[12] 0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[13] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[14] -1	0x00000000 - 0x000000ff (0x100) IX[B]
	[15] -1	0x00001c00 - 0x00001cff (0x100) IX[B]
	[16] -1	0x00001060 - 0x0000107f (0x20) IX[B]
	[17] -1	0x00001080 - 0x0000108f (0x10) IX[B]
	[18] -1	0x00001400 - 0x000014ff (0x100) IX[B]
	[19] -1	0x00002000 - 0x000020ff (0x100) IX[B](B)
	[20] -1	0x00001800 - 0x000018ff (0x100) IX[B]
	[21] 0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[22] 0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(==) ATI(0): Chipset:  "ati".
(**) ATI(0): Depth 24, (--) framebuffer bpp 32
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.5
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.5
(II) ATI(0): VESA BIOS detected
(II) ATI(0): VESA VBE Version 2.0
(II) ATI(0): VESA VBE Total Mem: 8128 kB
(II) ATI(0): VESA VBE OEM: ATI MACH64
(II) ATI(0): VESA VBE OEM Software Rev: 1.0
(II) ATI(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) ATI(0): VESA VBE OEM Product: MACH64RM
(II) ATI(0): VESA VBE OEM Product Rev: 01.00
(II) ATI(0): VESA VBE DDC supported
(II) ATI(0): VESA VBE DDC Level none
(II) ATI(0): VESA VBE DDC transfer in appr. 2 sec.
(II) ATI(0): VESA VBE DDC read failed
(--) ATI(0): ATI 3D Rage Mobility graphics controller detected.
(--) ATI(0): Chip type 4C4D "LM", version 4, foundry TSMC, class 0, revision 0x01.
(--) ATI(0): AGP bus interface detected;  block I/O base is 0x2000.
(--) ATI(0): ATI Mach64 adapter detected.
(!!) ATI(0): For information on using the multimedia capabilities
 of this adapter, please see http://gatos.sf.net.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 888
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(--) ATI(0): 1024x768 panel (ID 4) detected.
(--) ATI(0): Panel model ADT L133X2-3A.
(--) ATI(0): Panel clock is 65.146 MHz.
(II) ATI(0): Using digital flat panel interface.
(II) ATI(0): Storing hardware cursor image at 0xFD7FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0xFD000000.
(!!) ATI(0): Virtual resolutions will be limited to 8191 kB
 due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0xFC100400.
(II) ATI(0): Using Block 1 MMIO aperture at 0xFC100000.
(==) ATI(0): Write-combining range (0xfd000000,0x800000)
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 8192 kB of SDRAM (1:1) detected (using 8191 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 29.500 MHz.
(II) ATI(0): Maximum clock: 230.00 MHz
(II) ATI(0): Not using default mode "640x350" (vrefresh out of range)
(II) ATI(0): Not using default mode "320x175" (vrefresh out of range)
(II) ATI(0): Not using default mode "640x400" (vrefresh out of range)
(II) ATI(0): Not using default mode "320x200" (vrefresh out of range)
(II) ATI(0): Not using default mode "720x400" (vrefresh out of range)
(II) ATI(0): Not using default mode "360x200" (vrefresh out of range)
(II) ATI(0): Not using default mode "320x240" (vrefresh out of range)
(II) ATI(0): Not using default mode "320x240" (vrefresh out of range)
(II) ATI(0): Not using default mode "320x240" (vrefresh out of range)
(II) ATI(0): Not using default mode "400x300" (vrefresh out of range)
(II) ATI(0): Not using default mode "400x300" (vrefresh out of range)
(II) ATI(0): Not using default mode "400x300" (vrefresh out of range)
(II) ATI(0): Not using default mode "512x384" (vrefresh out of range)
(II) ATI(0): Not using default mode "512x384" (vrefresh out of range)
(II) ATI(0): Not using default mode "512x384" (hsync out of range)
(II) ATI(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "576x432" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "640x512" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "640x512" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "640x512" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "896x672" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "896x672" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "928x696" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "928x696" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "960x720" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "960x720" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "832x624" (vrefresh out of range)
(II) ATI(0): Not using default mode "416x312" (vrefresh out of range)
(II) ATI(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "700x525" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "700x525" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "800x512" (exceeds panel dimensions)
(II) ATI(0): Not using built-in mode "Native panel mode" (vrefresh out of range)
(--) ATI(0): Virtual size is 1024x768 (pitch 1024)
(**) ATI(0): Mode "1024x768": 71.4 MHz, 51.0 kHz, 63.6 Hz
(II) ATI(0): Modeline "1024x768"   71.39  1024 1040 1216 1400  768 768 778 802
(**) ATI(0): Mode "800x600": 43.7 MHz, 40.7 kHz, 65.1 Hz
(II) ATI(0): Modeline "800x600"   43.68  800 816 928 1072  600 600 610 626
(**) ATI(0): Mode "640x480": 28.0 MHz, 32.4 kHz, 64.6 Hz
(II) ATI(0): Modeline "640x480"   27.96  640 656 720 864  480 480 490 501
(==) ATI(0): DPI set to (75, 75)
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0xfc100000 - 0xfc100fff (0x1000) MS[B]
	[1] 0	0xfd000000 - 0xfdffffff (0x1000000) MS[B]
	[2] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[4] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0xfc001000 - 0xfc0010ff (0x100) MX[B]
	[8] -1	0xf8000000 - 0xfbffffff (0x4000000) MX[B]
	[9] -1	0xfc100000 - 0xfc100fff (0x1000) MX[B](B)
	[10] -1	0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
	[11] -1	0xfc000000 - 0xfc000fff (0x1000) MX[B]
	[12] 0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[13] 0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[14] 0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[15] 0	0x00002000 - 0x000020ff (0x100) IS[B]
	[16] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] -1	0x00001c00 - 0x00001cff (0x100) IX[B]
	[19] -1	0x00001060 - 0x0000107f (0x20) IX[B]
	[20] -1	0x00001080 - 0x0000108f (0x10) IX[B]
	[21] -1	0x00001400 - 0x000014ff (0x100) IX[B]
	[22] -1	0x00002000 - 0x000020ff (0x100) IX[B](B)
	[23] -1	0x00001800 - 0x000018ff (0x100) IX[B]
	[24] 0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[25] 0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) ATI(0): Write-combining range (0xfd000000,0x800000)
(II) ATI(0): Largest offscreen areas (with overlaps):
(II) ATI(0): 	1024 x 1279 rectangle at 0,768
(II) ATI(0): 	768 x 1280 rectangle at 0,768
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		10 256x256 slots
(==) ATI(0): Backing store disabled
(==) ATI(0): Silken mouse enabled
(**) Option "dpms"
(**) ATI(0): DPMS enabled
(II) ATI(0): ecp_div is 0
(II) ATI(0): 0x55 0xaa
(II) ATI(0): No MM_TABLE found
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.2.0
	ABI class: XFree86 Video Driver, version 0.5
(II) ATI(0): I2C bus "Rage Pro i2c bus" initialized.
(II) ATI(0): StartTimeout = 5
(II) ATI(0): Detecting addon board, trying default i2c mode
(II) ATI(0): No video input capabilities detected
(WW) ATI(0): Option "CalcAlgorithm" is not used
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension RENDER

I installed over the Standard XFree 4.2.0 the ati.2 drivers from the
Gatos-Project. Version: experimental 11 (4.2.0-11)

Soundcard: I use ALSA drivers, included in my distribution

Here the output of gdb:
GNU gdb 5.1.1
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "i386-suse-linux"...
(gdb) run -v -gui
Starting program: /usr/local/bin/mplayer -v -gui
 '-v' '-gui'
font: can't open file: /root/.mplayer/font/font.desc
Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
[New Thread 1024 (LWP 7193)]

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 1024 (LWP 7193)]
0x405a93a1 in strstr () from /lib/libc.so.6
(gdb) bt
#0  0x405a93a1 in strstr () from /lib/libc.so.6
#1  0x40019b87 in gdk_init_check () from /opt/gnome/lib/libgdkxft.so
#2  0x40107c71 in gtk_init_check () from /usr/lib/libgtk-1.2.so.0
#3  0x401080fa in gtk_init () from /usr/lib/libgtk-1.2.so.0
#4  0x081a36f7 in gtkInit () at mplayer/widgets.c:67
#5  0x4054c9ed in __libc_start_main () from /lib/libc.so.6
(gdb) disass $eip-32 $eip+32
Dump of assembler code from 0x405a9381 to 0x405a93c1:
0x405a9381 <strstr+1>:	mov    %esp,%ebp
0x405a9383 <strstr+3>:	sub    $0x20,%esp
0x405a9386 <strstr+6>:	push   %edi
0x405a9387 <strstr+7>:	push   %esi
0x405a9388 <strstr+8>:	mov    0xc(%ebp),%eax
0x405a938b <strstr+11>:	mov    0x8(%ebp),%esi
0x405a938e <strstr+14>:	movzbl (%eax),%edx
0x405a9391 <strstr+17>:	mov    %edx,0xfffffffc(%ebp)
0x405a9394 <strstr+20>:	test   %edx,%edx
0x405a9396 <strstr+22>:	je     0x405a941a <strstr+154>
0x405a939c <strstr+28>:	dec    %esi
0x405a939d <strstr+29>:	lea    0x0(%esi),%esi
0x405a93a0 <strstr+32>:	inc    %esi
0x405a93a1 <strstr+33>:	movzbl (%esi),%edx
0x405a93a4 <strstr+36>:	mov    %edx,0xfffffff8(%ebp)
0x405a93a7 <strstr+39>:	test   %edx,%edx
0x405a93a9 <strstr+41>:	je     0x405a9420 <strstr+160>
0x405a93ab <strstr+43>:	mov    0xfffffffc(%ebp),%edx
0x405a93ae <strstr+46>:	cmp    %edx,0xfffffff8(%ebp)
0x405a93b1 <strstr+49>:	jne    0x405a93a0 <strstr+32>
0x405a93b3 <strstr+51>:	movzbl 0x1(%eax),%edx
0x405a93b7 <strstr+55>:	mov    %edx,0xfffffff8(%ebp)
0x405a93ba <strstr+58>:	test   %edx,%edx
0x405a93bc <strstr+60>:	je     0x405a941a <strstr+154>
0x405a93be <strstr+62>:	lea    0x2(%eax),%edi
End of assembler dump.
(gdb) Quit
The program is running.  Exit anyway? (y or n) 

I found something very interesting out:
When having started X and Gnome, I switch to a text console (for
example tty2) and type in:
export DISPLAY=":0"
mplayer -gui

I switch to my X-console and everything works fine!! The gui
 is normally availible. Confusing...

I hope I have submitted all necessary information.

Greetings

-Daniel Stöckner