[MPlayer-users] MPlayer 1.0RC2 problem getting directx and dosund to work...
trappski
trappski at gmail.com
Wed Oct 31 22:51:41 CET 2007
Ulion wrote:
> 2007/10/22, trappski <trappski at gmail.com>:
>
>> Ulion wrote:
>>
>>> 2007/10/22, trappski <trappski at gmail.com>:
>>>
>>>
>>>> Ulion wrote:
>>>>
>>>>
>>>>> Then what's in your mplayer/config file, please post it.
>>>>>
>>>>>
>>>> Here ya go:
>>>>
>>>> vo=directx
>>>> #vo=gl:yuv=3:lscale=1
>>>> #double=yes
>>>> font=c:/windows/fonts/arial.ttf
>>>> autosync=100
>>>> framedrop=yes
>>>> quiet=yes
>>>> #adapter=2
>>>> #fs=yes
>>>>
>>>>
>>>>
>>> Still not found wrong place. Now, try to add two '-v' into the mplayer
>>> command line and start and quit once init finished.
>>> Notice the output is huge when two '-v' is used.
>>> You need to cut the part between the line 'VIDEO: [XVID]...' and the
>>> line 'Opening audio decoder:', and this part will include the detail
>>> vo preinit debug output.
>>>
>>>
>>>
>> This would be all there is to that:
>>
>> VIDEO: [XVID] 624x352 12bpp 23.976 fps 977.6 kbps (119.3 kbyte/s)
>> [V] filefmt:3 fourcc:0x44495658 size:624x352 fps:23.98 ftime:=0.0417
>> Clip info:
>> Software: VirtualDub
>> get_path('sub/') -> 'C:/Program/mplayer1.0RC2/mplayer/sub/'
>> ==========================================================================
>>
>> And thanks for taking your time.
>>
>
> That's not correct, check your output.gz sent to this thread, with a
> '-v' in the commandline there at least has one line:
> Error opening/initializing the selected video_out (-vo) device.
> With two '-v' in commandline will produce a huge output, I don't think
> you run mplayer with two '-v' or give the correct part here.
>
>
Actually i did... Though the Error-line is written directly to the
command-window instead of the outputfile i specified...
This is exactly what i get:
MPlayer 1.0rc2-3.4.2 (C) 2000-2007 MPlayer Team
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (Family: 15, Model:
75, Stepping: 2)
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2
Adding file D:\Isos\Torrents\Anime\Darker Than Black 01-25
[Subbed]\[sudo]_DarkerThanBlack_01 [ABDDD1DD].mkv
Config pushed level is now 2
Config pushed level is now 3
get_path('codecs.conf') -> 'C:/Program/mplayer1.0RC2/mplayer/codecs.conf'
Reading C:/Program/mplayer1.0RC2/mplayer/codecs.conf: Can't open
'C:/Program/mplayer1.0RC2/mplayer/codecs.conf': No such file or directory
Reading /usr/local/etc/mplayer/codecs.conf: Can't open
'/usr/local/etc/mplayer/codecs.conf': No such file or directory
Using built-in default codecs.conf.
Configuration: --enable-menu
CommandLine: '-v' '-v' 'D:\Isos\Torrents\Anime\Darker Than Black 01-25
[Subbed]\[sudo]_DarkerThanBlack_01 [ABDDD1DD].mkv'
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Using Windows native timing
get_path('input.conf') -> 'C:/Program/mplayer1.0RC2/mplayer/input.conf'
Parsing input config file C:/Program/mplayer1.0RC2/mplayer/input.conf
Input config file C:/Program/mplayer1.0RC2/mplayer/input.conf parsed: 53
binds
get_path('D:\Isos\Torrents\Anime\Darker Than Black 01-25
[Subbed]\[sudo]_DarkerThanBlack_01 [ABDDD1DD].mkv.conf') ->
'C:/Program/mplayer1.0RC2/mplayer/D:\Isos\Torrents\Anime\Darker Than
Black 01-25 [Subbed]\[sudo]_DarkerThanBlack_01 [ABDDD1DD].mkv.conf'
[[[init getch2]]]
Playing D:\Isos\Torrents\Anime\Darker Than Black 01-25
[Subbed]\[sudo]_DarkerThanBlack_01 [ABDDD1DD].mkv.
get_path('sub/') -> 'C:/Program/mplayer1.0RC2/mplayer/sub/'
WINSOCK2 init: 0
[file] File size is 260377944 bytes
STREAM: [file] D:\Isos\Torrents\Anime\Darker Than Black 01-25
[Subbed]\[sudo]_DarkerThanBlack_01 [ABDDD1DD].mkv
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
s->pos=0 newpos=0 new_bufpos=0 buflen=0
LAVF_check: Matroska file format
DEMUXER: freeing demuxer at 0134A008
DEMUXER: freeing demuxer at 0134A008
Checking for YUV4MPEG2
DEMUXER: freeing demuxer at 0134A008
ASF_check: not ASF guid!
DEMUXER: freeing demuxer at 0134A008
Checking for NuppelVideo
DEMUXER: freeing demuxer at 0134A008
Checking for REAL
DEMUXER: freeing demuxer at 0134A008
Checking for SMJPEG
DEMUXER: freeing demuxer at 0134A008
[mkv] Found the head...
[mkv] + a segment...
[mkv] /---- [ parsing seek head ] ---------
s->pos=800 newpos=1000 new_bufpos=1027 buflen=0
s->pos=1800 newpos=0 new_bufpos=38 buflen=0
s->pos=800 newpos=1000 new_bufpos=110C buflen=0
s->pos=1800 newpos=0 new_bufpos=47 buflen=0
s->pos=800 newpos=F84D800 new_bufpos=F84DD0C buflen=0
[mkv] /---- [ parsing seek head ] ---------
[mkv] \---- [ parsing seek head ] ---------
s->pos=F850D58 newpos=0 new_bufpos=58 buflen=0
s->pos=800 newpos=F84C000 new_bufpos=F84C4F4 buflen=0
[mkv] /---- [ parsing cues ] -----------
[mkv] |+ found cue point for track 1: timecode 0, filepos: 58391
[Tons of these that i stripped away...]
[mkv] |+ found cue point for track 1: timecode 1466590, filepos: 260093633
[mkv] \---- [ parsing cues ] -----------
s->pos=F84E000 newpos=0 new_bufpos=69 buflen=0
s->pos=800 newpos=E000 new_bufpos=E2C2 buflen=0
[mkv] /---- [ parsing chapters ] ---------
[mkv] Chapter 0 from 00:00:00.000 to 00:00:00.000, Introduction
[mkv] Chapter 1 from 00:05:09.200 to 00:00:00.000, Opening
[mkv] Chapter 2 from 00:06:49.000 to 00:00:00.000, Episode Start
[mkv] Chapter 3 from 00:22:17.333 to 00:00:00.000, Ending
[mkv] Chapter 4 from 00:23:46.874 to 00:00:00.000, Next Episode
[mkv] \---- [ parsing chapters ] ---------
s->pos=E800 newpos=0 new_bufpos=78 buflen=0
s->pos=800 newpos=1800 new_bufpos=1933 buflen=0
s->pos=2000 newpos=0 new_bufpos=87 buflen=0
[mkv] \---- [ parsing seek head ] ---------
[mkv] |+ segment information...
[mkv] | + timecode scale: 1000000
[mkv] | + duration: -0.000s
[mkv] |+ segment tracks...
[mkv] | + a track...
[mkv] | + Track number: 1
[mkv] | + Track type: Video
[mkv] | + Default flag: 1
[mkv] | + Codec ID: V_MPEG4/ISO/AVC
[mkv] | + CodecPrivate, length 39
[mkv] | + Default duration: 41.708ms ( = 23.976 fps)
[mkv] | + Language: eng
[mkv] | + Name: 01 - The Star of the Contract Shoots By (Part One)
[mkv] | + Video track
[mkv] | + Pixel width: 1280
[mkv] | + Pixel height: 720
[mkv] | + Display width: 1280
[mkv] | + Display height: 720
[mkv] | + a track...
[mkv] | + Track number: 2
[mkv] | + Track type: Audio
[mkv] | + Default flag: 1
[mkv] | + Codec ID: A_MPEG/L3
[mkv] | + Default duration: 24.000ms ( = 41.667 fps)
[mkv] | + Language: jpn
[mkv] | + Name: Japanese Audio (2ch MP3)
[mkv] | + Audio track
[mkv] | + Sampling frequency: 48000.000000
[mkv] | + Channels: 2
[mkv] | + a track...
[mkv] | + Track number: 3
[mkv] | + Track type: Subtitle
[mkv] | + Default flag: 1
[mkv] | + Codec ID: S_TEXT/ASS
[mkv] | + CodecPrivate, length 651
[mkv] | + Language: eng
[mkv] | + Name: English Subtitles (ASS)
[mkv] /---- [ parsing attachments ] ---------
[mkv] | + an attachment...
[mkv] | + FileName: Sapir Sans.ttf
[mkv] | + FileMimeType: application/x-truetype-font
[mkv] | + FileData, length 51528
[mkv] Attachment: Sapir Sans.ttf, application/x-truetype-font, 51528 bytes
[mkv] \---- [ parsing attachments ] ---------
[mkv] |+ found cluster, headers are parsed completely :)
==> Found video stream: 1
[mkv] Aspect: 1.777778
[mkv] Track ID 1: video (V_MPEG4/ISO/AVC) "01 - The Star of the Contract
Shoots By (Part One)", -vid 0
==> Found audio stream: 2
[mkv] Track ID 2: audio (A_MPEG/L3) "Japanese Audio (2ch MP3)", -aid 0,
-alang jpn
[mkv] Track ID 3: subtitles (S_TEXT/ASS) "English Subtitles (ASS)", -sid
0, -slang eng
[mkv] Will play video track 1.
Matroska file format detected.
VIDEO: [avc1] 1280x720 24bpp 23.976 fps 0.0 kbps ( 0.0 kbyte/s)
[V] filefmt:31 fourcc:0x31637661 size:1280x720 fps:23.98 ftime:=0.0417
get_path('sub/') -> 'C:/Program/mplayer1.0RC2/mplayer/sub/'
subtitles: 1 subs, (v at -1 s at -1 d at 0), @-1, source @-1
Error opening/initializing the selected video_out (-vo) device.
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer.
mp3lib: using 3DNow!Ex optimized decore!
MP3lib: init layer2&3 finished, tables done
MPEG 1.0, Layer III, 48000 Hz 192 kbit Stereo, BPF: 576
Channels: 2, copyright: No, original: No, CRC: No, emphasis: 0
AUDIO: 48000 Hz, 2 ch, s16le, 192.0 kbit/12.50% (ratio: 24000->192000)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
Building audio filter chain for 48000Hz/2ch/s16le -> 0Hz/0ch/??...
[libaf] Adding filter dummy
[dummy] Was reinitialized: 48000Hz/2ch/s16le
[dummy] Was reinitialized: 48000Hz/2ch/s16le
ao_win32: Samplerate:48000Hz Channels:2 Format:s16le
ao_win32: Buffersize:4096
AO: [win32] 48000Hz 2ch s16le (2 bytes per sample)
AO: Description: Windows waveOut audio output
AO: Author: Sascha Sommer <saschasommer at freenet.de>
Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le...
[dummy] Was reinitialized: 48000Hz/2ch/s16le
[dummy] Was reinitialized: 48000Hz/2ch/s16le
Video: no video
Freeing 0 unused video chunks.
Starting playback...
More information about the MPlayer-users
mailing list