[MPlayer-users] Problem with big files
Robert Zelic
zrobi at uns.ns.ac.yu
Mon Feb 5 15:17:14 CET 2007
I can't open bigger files than about 200MB. Before everything worked just
fine, so I think I have this problem since I changed my linux partition
type from ext3 to reiserfs.
Here is two samples, first is avi stored on ntfs, the secound is mpeg2
which is located on cdrom.
MPlayer 1.0rc1-3.4.6 (C) 2000-2006 MPlayer Team
CPU: Intel(R) Celeron(R) CPU 2.40GHz (Family: 15, Model: 4, Stepping: 1)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2
get_path('codecs.conf') -> '/home/robi/.mplayer/codecs.conf'
Reading /home/robi/.mplayer/codecs.conf: 98 audio & 216 video codecs
CommandLine: '-v' 'taxi 2004 (dvd rip).avi'
init_freetype
get_path('font/font.desc') -> '/home/robi/.mplayer/font/font.desc'
Bitmap font /home/robi/.mplayer/font/font.desc loaded successfully! (233 chars)
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Using nanosleep() timing
get_path('input.conf') -> '/home/robi/.mplayer/input.conf'
Parsing input config file /home/robi/.mplayer/input.conf
Input config file /home/robi/.mplayer/input.conf parsed: 68 binds
Setting up LIRC support...
get_path('taxi 2004 (dvd rip).avi.conf') -> '/home/robi/.mplayer/taxi 2004 (dvd rip).avi.conf'
Playing taxi 2004 (dvd rip).avi.
get_path('sub/') -> '/home/robi/.mplayer/sub/'
[file] File size is 735494144 bytes
STREAM: [file] taxi 2004 (dvd rip).avi
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
AVI file format detected.
list_end=0x2292
======= AVI Header =======
us/frame: 41708 (fps=23.976)
max bytes/sec: 0
padding: 0
MainAVIHeader.dwFlags: (272) HAS_INDEX IS_INTERLEAVED
frames total: 139753 initial: 0
streams: 2
Suggested BufferSize: 0
Size: 592 x 240
==========================
list_end=0x10F4
==> Found video stream: 0
====== STREAM Header =====
Type: vids FCC: xvid (64697678)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 0
Rate: 2997/125 = 23.976
Start: 0 Len: 139753
Suggested BufferSize: 70082
Quality 10000
Sample size: 0
==========================
Found 'bih', 40 bytes of 40
======= VIDEO Format ======
biSize 40
biWidth 592
biHeight 240
biPlanes 1
biBitCount 12
biCompression 1145656920='XVID'
biSizeImage 852480
===========================
Regenerating keyframe table for MPEG-4 video.
list_end=0x2186
==> Found audio stream: 1
====== STREAM Header =====
Type: auds FCC: (0)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 1
Rate: 48000/1152 = 41.667
Start: 0 Len: 242867
Suggested BufferSize: 960
Quality -1
Sample size: 0
==========================
Found 'wf', 30 bytes of 18
======= WAVE Format =======
Format Tag: 85 (0x55)
Channels: 2
Samplerate: 48000
avg byte/sec: 16176
Block align: 1152
bits/sample: 0
cbSize: 12
mp3.wID=1
mp3.fdwFlags=0x2
mp3.nBlockSize=388
mp3.nFramesPerBlock=1
mp3.nCodecDelay=0
==========================================================================
list_end=0x2292
AVI: dmlh found (size=248) (total_frames=139753)
list_end=0x22B6
hdr=Software size=15
Software : Nandub v1.0rc2
list_end=0x2B7950FE
Found movie at 0x280C - 0x2B7950FE
Reading INDEX block, 382620 chunks for 139753 frames (fpos=729370886).
AVI index offset: 0x2808 (movi=0x280C idx0=0x4 idx1=0x18C)
Auto-selected AVI audio ID = 1
Auto-selected AVI video ID = 0
AVI: Searching for audio stream (id:1)
AVI video size=631913748 (139753) audio size=94290792 (242867)
VIDEO: [XVID] 592x240 12bpp 23.976 fps 867.3 kbps (105.9 kbyte/s)
[V] filefmt:3 fourcc:0x44495658 size:592x240 fps:23.98 ftime:=0.0417
Clip info:
Software: Nandub v1.0rc2
get_path('sub/') -> '/home/robi/.mplayer/sub/'
[file] File size is 84501 bytes
STREAM: [file] ./taxi 2004 (dvd rip).srt
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
SUB: Detected subtitle file format: subviewer
SUB: Read 1272 subtitles.
SUB: Adjusted 382 subtitle(s).
SUB: Added subtitle file (1): ./taxi 2004 (dvd rip).srt
X11 opening display: :0.0
vo: X11 color mask: FFFFFF (R:FF0000 G:FF00 B:FF)
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
[x11] Detected wm supports NetWM.
[x11] Detected wm supports FULLSCREEN state.
[x11] Detected wm supports ABOVE state.
[x11] Detected wm supports BELOW state.
[x11] Detected wm supports STAYS_ON_TOP state.
[x11] Current fstype setting honours FULLSCREEN STAYS_ON_TOP ABOVE BELOW X atoms
[xv common] Drawing colorkey manually.
[xv common] Using colorkey from Xv (0x00001e).
[xv common] Maximum source image dimensions: 2048x2048
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
INFO: libavcodec init OK!
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer.
mp3lib: made decode tables with MMX optimization
mp3lib: using SSE optimized decore!
MP3lib: init layer2&3 finished, tables done
MPEG 1.0, Layer III, 48000 Hz 128 kbit Joint-Stereo, BPF: 384
Channels: 2, copyright: No, original: Yes, CRC: Yes, emphasis: 0
AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
Building audio filter chain for 48000Hz/2ch/s16le -> 0Hz/0ch/??...
[libaf] Adding filter lavcresample
alsa-init: requested format: 44100 Hz, 2 channels, 9
alsa-init: using ALSA 1.0.11
alsa-init: setup for 1/2 channel(s)
alsa-init: using device default
alsa-init: pcm opend in blocking mode
alsa-init: chunksize set to 1024
alsa-init: fragcount=16
alsa-init: got buffersize=65536
alsa-init: got period size 1024
alsa: 48000 Hz/2 channels/4 bpf/65536 bytes buffer/Signed 16 bit Little Endian
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
AO: Description: ALSA-0.9.x-1.x audio output
AO: Author: Alex Beregszaszi, Zsolt Barat <joy at streamminister.de>
AO: Comment: under developement
Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le...
[libaf] Removing filter lavcresample
MPlayer interrupted by signal 11 in module: af_init
- MPlayer crashed by bad usage of CPU/FPU/RAM.
Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and
disassembly. Details in DOCS/HTML/en/bugreports_what.html#bugreports_crash.
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it's MPlayer's fault, please read
DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
won't help unless you provide this information when reporting a possible bug.
Uninit audio filters...
Uninit audio: mp3lib
Uninit video: ffmpeg
alsa-uninit: pcm closed
vo: uninit ...
MPlayer 1.0rc1-3.4.6 (C) 2000-2006 MPlayer Team
CPU: Intel(R) Celeron(R) CPU 2.40GHz (Family: 15, Model: 4, Stepping: 1)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2
get_path('codecs.conf') -> '/home/robi/.mplayer/codecs.conf'
Reading /home/robi/.mplayer/codecs.conf: 98 audio & 216 video codecs
CommandLine: 'Old Gold 2.mpg' '-v'
init_freetype
get_path('font/font.desc') -> '/home/robi/.mplayer/font/font.desc'
Bitmap font /home/robi/.mplayer/font/font.desc loaded successfully! (233 chars)
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Using nanosleep() timing
get_path('input.conf') -> '/home/robi/.mplayer/input.conf'
Parsing input config file /home/robi/.mplayer/input.conf
Input config file /home/robi/.mplayer/input.conf parsed: 68 binds
Setting up LIRC support...
get_path('Old Gold 2.mpg.conf') -> '/home/robi/.mplayer/Old Gold 2.mpg.conf'
Playing Old Gold 2.mpg.
get_path('sub/') -> '/home/robi/.mplayer/sub/'
[file] File size is 282225072 bytes
STREAM: [file] Old Gold 2.mpg
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
Checking for YUV4MPEG2
ASF_check: not ASF guid!
Checking for NuppelVideo
Checking for REAL
Checking for SMJPEG
Searching demuxer type for filename Old Gold 2.mpg ext: .mpg
Checking for Nullsoft Streaming Video
Checking for MOV
Checking for VIVO
header block 1 size: 0
AVS: avs_check_file - attempting to open file Old Gold 2.mpg
AVS: File is too big, aborting...
Checking for PVA
Checking for MPEG-TS...
TRIED UP TO POSITION 91188, FOUND 47, packet_size= 0, SEEMS A TS? 0
Checking for LMLM4 Stream Format
Invalid packet in LMLM4 stream: ch=0 size=1140851704
LMLM4 Stream Format not found
system stream synced at 0xD (13)!
==> Found video stream: 0
==> Found audio stream: 0
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: video)
MPEG-PS file format detected.
Searching for sequence header... OK!
VIDEO: MPEG2 720x576 (aspect 2) 25.000 fps 6000.0 kbps (750.0 kbyte/s)
[V] filefmt:2 fourcc:0x10000002 size:720x576 fps:25.00 ftime:=0.0400
get_path('sub/') -> '/home/robi/.mplayer/sub/'
X11 opening display: :0.0
vo: X11 color mask: FFFFFF (R:FF0000 G:FF00 B:FF)
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
[x11] Detected wm supports NetWM.
[x11] Detected wm supports FULLSCREEN state.
[x11] Detected wm supports ABOVE state.
[x11] Detected wm supports BELOW state.
[x11] Detected wm supports STAYS_ON_TOP state.
[x11] Current fstype setting honours FULLSCREEN STAYS_ON_TOP ABOVE BELOW X atoms
[xv common] Drawing colorkey manually.
[xv common] Using colorkey from Xv (0x00001e).
[xv common] Maximum source image dimensions: 2048x2048
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 720 x 576 (preferred colorspace: Mpeg PES)
Trying filter chain: vo
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
SwScale params: -1 x -1 (-1=no scaling)
Trying filter chain: scale vo
The selected video_out device is incompatible with this codec.
Try adding the scale filter, e.g. -vf spp,scale instead of -vf spp.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b
Selected video codec: [mpeg12] vfm: libmpeg2 (MPEG-1 or 2 (libmpeg2))
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer.
mp3lib: made decode tables with MMX optimization
mp3lib: using SSE optimized decore!
MP3lib: init layer2&3 finished, tables done
MPEG 1.0, Layer II, 48000 Hz 224 kbit Joint-Stereo, BPF: 672
Channels: 2, copyright: No, original: No, CRC: No, emphasis: 0
AUDIO: 48000 Hz, 2 ch, s16le, 224.0 kbit/14.58% (ratio: 28000->192000)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
Building audio filter chain for 48000Hz/2ch/s16le -> 0Hz/0ch/??...
[libaf] Adding filter lavcresample
alsa-init: requested format: 44100 Hz, 2 channels, 9
alsa-init: using ALSA 1.0.11
alsa-init: setup for 1/2 channel(s)
alsa-init: using device default
alsa-init: pcm opend in blocking mode
alsa-init: chunksize set to 1024
alsa-init: fragcount=16
alsa-init: got buffersize=65536
alsa-init: got period size 1024
alsa: 48000 Hz/2 channels/4 bpf/65536 bytes buffer/Signed 16 bit Little Endian
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
AO: Description: ALSA-0.9.x-1.x audio output
AO: Author: Alex Beregszaszi, Zsolt Barat <joy at streamminister.de>
AO: Comment: under developement
Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le...
[libaf] Removing filter lavcresample
MPlayer interrupted by signal 11 in module: af_init
- MPlayer crashed by bad usage of CPU/FPU/RAM.
Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and
disassembly. Details in DOCS/HTML/en/bugreports_what.html#bugreports_crash.
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it's MPlayer's fault, please read
DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
won't help unless you provide this information when reporting a possible bug.
Uninit audio filters...
Uninit audio: mp3lib
Uninit video: libmpeg2
alsa-uninit: pcm closed
vo: uninit ...
So I tried to compile with debug option enabled:
./configure --enable-debug=3
make
But, the following error has occured:
gifdec.c:500: warning: missing initializer
gifdec.c:500: warning: (near initialization for `gif_decoder.capabilities')
cc -DHAVE_AV_CONFIG_H -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_ISOC9X_SOURCE -I.. -I.. -I../libavutil -Wdeclaration-after-statement -fno-PIC -W -Wall -Wno-unused-parameter -O2 -march=prescott -mtune=prescott -g3 -D_REENTRANT -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/X11/include -I/usr/include/ -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -I/opt/kde/include/artsc -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/X11R6/include -I/usr/include -c -o h261.o h261.c
In file included from h261.c:32:
h261data.h:157: warning: missing initializer
h261data.h:157: warning: (near initialization for `h261_rl_tcoeff.index_run')
h261.c:1045: warning: missing initializer
h261.c:1045: warning: (near initialization for `h261_decoder.next')
h261.c:1054: warning: missing initializer
h261.c:1054: warning: (near initialization for `h261_parser.split')
cc -DHAVE_AV_CONFIG_H -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_ISOC9X_SOURCE -I.. -I.. -I../libavutil -Wdeclaration-after-statement -fno-PIC -W -Wall -Wno-unused-parameter -O2 -march=prescott -mtune=prescott -g3 -D_REENTRANT -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/X11/include -I/usr/include/ -I/usr/include/SDL -D_GNU_SOURCE=1 -D_REENTRANT -I/opt/kde/include/artsc -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/freetype2 -I/usr/X11R6/include -I/usr/include -c -o h264.o h264.c
In file included from h264.c:36:
cabac.h:363: warning: `inline' is not at beginning of declaration
h264.c: In function `hl_decode_mb':
h264.c:3661: warning: suggest parentheses around arithmetic in operand of ^
h264.c:3667: warning: suggest parentheses around arithmetic in operand of ^
h264.c: In function `print_short_term':
h264.c:4326: warning: comparison between signed and unsigned
h264.c: At top level:
h264.c:6009: warning: `inline' is not at beginning of declaration
h264.c: In function `decode_cabac_residual':
h264.c:6143: warning: passing arg 4 of `decode_significance_8x8_x86' discards qualifiers from pointer target type
h264.c:6070: warning: unused variable `last'
h264.c: At top level:
h264.c:6218: warning: `inline' is not at beginning of declaration
h264.c: In function `filter_mb':
h264.c:7181: warning: comparison between signed and unsigned
h264.c: In function `decode_unregistered_user_data':
h264.c:7593: warning: comparison between signed and unsigned
h264.c: At top level:
h264.c:8652: warning: missing initializer
h264.c:8652: warning: (near initialization for `h264_parser.next')
In file included from h264.c:8655:
svq3.c: In function `svq3_decode_block':
svq3.c:224: warning: comparison between signed and unsigned
svq3.c: In function `svq3_mc_dir':
svq3.c:374: warning: comparison between signed and unsigned
svq3.c:374: warning: comparison between signed and unsigned
svq3.c: In function `svq3_decode_mb':
svq3.c:450: warning: comparison between signed and unsigned
svq3.c: In function `svq3_decode_slice_header':
svq3.c:741: warning: comparison between signed and unsigned
svq3.c: At top level:
svq3.c:1014: warning: missing initializer
svq3.c:1014: warning: (near initialization for `svq3_decoder.next')
cabac.h: In function `get_cabac_noinline':
cabac.h:513: error: can't find a register in class `GENERAL_REGS' while reloading `asm'
h264.c: At top level:
cabac.h:106: warning: 'put_cabac_static' defined but not used
cabac.h:152: warning: 'put_cabac_terminate' defined but not used
cabac.h:180: warning: 'put_cabac_u' defined but not used
cabac.h:215: warning: 'put_cabac_ueg' defined but not used
cabac.h:267: warning: 'refill2' defined but not used
cabac.h:799: warning: 'get_cabac_u' defined but not used
cabac.h:815: warning: 'get_cabac_ueg' defined but not used
make[1]: *** [h264.o] Error 1
make[1]: Leaving directory `/home/robi/src/MPlayer-1.0rc1/libavcodec'
make: *** [libavcodec/libavcodec.a] Error 2
More information about the MPlayer-users
mailing list