[MPlayer-users] MPlayer crash?

[Dominik 'Rathann' Mierzejewski]

On Wednesday, 29 August 2007 at 01:31, Chris Arnold wrote:
> Dominik 'Rathann' Mierzejewski wrote:
> >   
> > Please post full mplayer -v file.mpg output. The above is not very useful.
> MPlayer dev-SVN-rUNKNOWN-4.1.2 (C) 2000-2007 MPlayer Team
> CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (Family: 15, Model: 2, Stepping: 9)
> CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
> Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2
> get_path('codecs.conf') ->
> '/home/ELECTRICHENDRIX/carnold/.mplayer/codecs.conf'
> Reading /home/ELECTRICHENDRIX/carnold/.mplayer/codecs.conf: Can't open
> '/home/ELECTRICHENDRIX/carnold/.mplayer/codecs.conf': No such file or
> directory
> Reading /usr/local/etc/mplayer/codecs.conf: Can't open
> '/usr/local/etc/mplayer/codecs.conf': No such file or directory
> Using built-in default codecs.conf.
> Configuration:
> CommandLine: '-v' 'mov1ed.mpg'
> get_path('font/font.desc') ->
> '/home/ELECTRICHENDRIX/carnold/.mplayer/font/font.desc'
> font: can't open file: /home/ELECTRICHENDRIX/carnold/.mplayer/font/font.desc
> font: can't open file: /usr/local/share/mplayer/font/font.desc
> Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
> Using nanosleep() timing
> get_path('input.conf') ->
> '/home/ELECTRICHENDRIX/carnold/.mplayer/input.conf'
> Can't open input config file
> /home/ELECTRICHENDRIX/carnold/.mplayer/input.conf: No such file or directory
> Can't open input config file /usr/local/etc/mplayer/input.conf: No such
> file or directory
> Falling back on default (hardcoded) input config
> Setting up LIRC support...
> mplayer: could not connect to socket
> mplayer: Permission denied
> Failed to open LIRC support. You will not be able to use your remote
> control.
> get_path('mov1ed.mpg.conf') ->
> '/home/ELECTRICHENDRIX/carnold/.mplayer/mov1ed.mpg.conf'
> 
> Playing mov1ed.mpg.
> get_path('sub/') -> '/home/ELECTRICHENDRIX/carnold/.mplayer/sub/'
> [file] File size is 11855872 bytes
> STREAM: [file] mov1ed.mpg
> STREAM: Description: File
> STREAM: Author: Albeu
> STREAM: Comment: based on the code from ??? (probably Arpi)
> Checking for YUV4MPEG2
> ASF_check: not ASF guid!
> Checking for NuppelVideo
> Checking for REAL
> Checking for SMJPEG
> Searching demuxer type for filename mov1ed.mpg ext: .mpg
> LAVF_check: MPEG PS format
> Checking for Nullsoft Streaming Video
> Checking for MOV
> Checking for VIVO
> header block 1 size: 0
> AVS: avs_check_file - attempting to open file mov1ed.mpg
> AVS: File is too big, aborting...
> Checking for PVA
> Checking for MPEG-TS...
> TRIED UP TO POSITION 65979, FOUND 47, packet_size= 0, SEEMS A TS? 0
> Checking for LMLM4 Stream Format
> Invalid packet in LMLM4 stream: ch=0 size=1140851704
> LMLM4 Stream Format not found
> system stream synced at 0xD (13)!
> ==> Found video stream: 0
> ==> Found audio stream: 128
> MPEG-PS file format detected.
> Searching for sequence header... OK!
> VIDEO: MPEG2 720x480 (aspect 2) 29.970 fps 8400.0 kbps (1050.0 kbyte/s)
> [V] filefmt:2 fourcc:0x10000002 size:720x480 fps:29.97 ftime:=0.0334
> get_path('sub/') -> '/home/ELECTRICHENDRIX/carnold/.mplayer/sub/'
> using /dev/fb0
> Can't open /dev/fb0: Permission denied
> [fbdev2] Using device /dev/fb0
> [fbdev2] Can't open /dev/fb0: Permission denied
> DirectFB: Preinit entered
> 
> ---------------------- DirectFB v0.9.24 ---------------------
> (c) 2000-2002 convergence integrated media GmbH
> (c) 2002-2004 convergence GmbH
> -----------------------------------------------------------
> 
> (*) DirectFB/Core: Single Application Core. (2006-06-16 17:43)
> (*) Direct/Memcpy: Using MMXEXT optimized memcpy()
> (!) Direct/Util: opening '/dev/fb0' failed
> --> Permission denied
> (!) DirectFB/FBDev: Error opening framebuffer device!
> (!) DirectFB/FBDev: Use 'fbdev' option or set FRAMEBUFFER environment
> variable.
> (!) DirectFB/Core: Could not initialize 'system' core!
> --> Initialization error!
> vo_directfb2.c <277>:
> (#) DirectFBError [DirectFBCreate (&dfb)]: Initialization error!

Try using some working VO. Though I'm guessing you didn't have the proper
development packages installed while building MPlayer and you ended up
with a binary that doesn't support any useful VOs.

> > Why would you use vcd://file ? vcd:// is only for playing VCDs and the
> > parameter is a track number, not filename. Is the manpage unclear here

> Apparently so,
> vcd:// play (S)VCD (Super Video CD) track (raw device, no mount) and the
> file i am trying to play is SVCD

Well, a "file" is not a "track". This is for playback from (S)VCD discs,
not files.

http://www.mplayerhq.hu/DOCS/HTML/en/vcd.html

Regards,
R.

-- 
MPlayer developer and RPMs maintainer: http://mplayerhq.hu http://rpm.livna.org
There should be a science of discontent. People need hard times and
oppression to develop psychic muscles.
	-- from "Collected Sayings of Muad'Dib" by the Princess Irulan