[MPlayer-users] Re: Issues using rebuild of 1.0pre7 w/ Unichrome XvMC

[Philip Prindeville]

Ok, I applied the patches and rebuilt with:

--enable-xvmc --enable-xvmcvld --with-xvmclib=XvMCW

and ran it again.  No joy:

[root at media mplayer]# DISPLAY=:0 sh -x rtp-view -vf spp,scale -v
+ nice --5 mplayer -hardframedrop -vf spp,scale -v rtp://224.0.1.2:5004
MPlayer dev-CVS-051008-15:57-3.4.4 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon 64 Clawhammer (Family: 15, Stepping: 10)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2



CommandLine: '-hardframedrop' '-vf' 'spp,scale' '-v' 'rtp://224.0.1.2:5004'
init_freetype
get_path('font/font.desc') -> '/root/.mplayer/font/font.desc'
font: can't open file: /root/.mplayer/font/font.desc
font: can't open file: /usr/share/mplayer/font/font.desc
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Using Linux hardware RTC timing (1024Hz).
get_path('input.conf') -> '/root/.mplayer/input.conf'
Can't open input config file /root/.mplayer/input.conf: No such file or 
directory
Can't open input config file /etc/mplayer/input.conf: No such file or 
directory
Falling back on default (hardcoded) input config
get_path('224.0.1.2:5004.conf') -> '/root/.mplayer/224.0.1.2:5004.conf'
Playing rtp://224.0.1.2:5004.
STREAM_RTP, URL: rtp://224.0.1.2:5004
Filename for url is now rtp://224.0.1.2:5004
Filename for url is now rtp://224.0.1.2:5004
Listening for traffic on 224.0.1.2:5004 ...
STREAM: [rtp and udp] rtp://224.0.1.2:5004
STREAM: Description: mpeg rtp and upd streaming
STREAM: Author: Dave Chapman
STREAM: Comment: native rtp support
CACHE_PRE_INIT: 0 [0] 16384  pre:1677721  eof:0
Cache fill: 17.87% (1499136 bytes)    Checking for YUV4MPEG2
ASF_check: not ASF guid!
Checking for NuppelVideo
Checking for REAL
Checking for SMJPEG
Searching demuxer type for filename rtp://224.0.1.2:5004 ext: .2:5004
Checking for Nullsoft Streaming Video
Checking for MOV
Checking for VIVO
header block 1 size: 32
Checking for PVA
Checking for MPEG-TS...
TRIED UP TO POSITION 0, FOUND 47, packet_size= 188, SEEMS A TS? 1
GOOD CC: 32, BAD CC: 0
TS file format detected.
DEMUX OPEN, AUDIO_ID: -1, VIDEO_ID: -1, SUBTITLE_ID: -1,
Checking for MPEG-TS...
TRIED UP TO POSITION 0, FOUND 47, packet_size= 188, SEEMS A TS? 1
GOOD CC: 32, BAD CC: 0
PROBING UP TO 2000000, PROG: 0
VIDEO MPEG2(pid=17)AUDIO A52(pid=20) NO SUBS (yet)!  PROGRAM N. 0
==> Found video stream: 0
==> Found audio stream: 0
Opened TS demuxer, audio: 2000(pid 20), video: 10000002(pid 17)...POS=75764
Searching for sequence header... OK!
VIDEO:  MPEG2  1920x1080  (aspect 3)  29.970 fps  15000.0 kbps (1875.0 
kbyte/s)
[V] filefmt:29  fourcc:0x10000002  size:1920x1080  fps:29.97  ftime:=0.0334
get_path('sub/') -> '/root/.mplayer/sub/'
get_path('default.sub') -> '/root/.mplayer/default.sub'
==========================================================================
Forced audio codec: hwdts
Forced audio codec: hwac3
Opening audio decoder: [hwac3] AC3/DTS pass-through S/PDIF
dec_audio: Allocating 8192 bytes for input buffer.
dec_audio: Allocating 16384 + 65536 = 81920 bytes for output buffer.
No accelerated IMDCT transform found
hwac3: switched to AC3, 384000 bps, 48000 Hz
AUDIO: 48000 Hz, 2 ch, ac3, 384.0 kbit/25.00% (ratio: 48000->192000)
Selected audio codec: [hwac3] afm:hwac3 (AC3 through S/PDIF)
==========================================================================
X11 opening display: :0
vo: X11 color mask:  FFFFFF  (R:FF0000 G:FF00 B:FF)
vo: X11 running at 1920x1080 with depth 24 and 32 bpp (":0" => local 
display)
[x11] Detected wm supports NetWM.
[x11] Detected wm supports FULLSCREEN state.
[x11] Detected wm supports ABOVE state.
[x11] Detected wm supports BELOW state.
[x11] Current fstype setting honours FULLSCREEN ABOVE BELOW X atoms
vo_xvmc: X-Video extension 2.2
vo_xvmc: X-Video MotionCompensation Extension version 1.1
Opening video filter: [scale]
SwScale params: -1 x -1 (-1=no scaling)
Opening video filter: [spp]
==========================================================================
Forced video codec: ffmpeg12mc
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
vd_ffmpeg: XVMC accelerated codec
INFO: libavcodec init OK!
Selected video codec: [ffmpeg12mc] vfm:ffmpeg (FFmpeg MPEG-1/2 (XvMC))
==========================================================================
Building audio filter chain for 48000Hz/2ch/ac3 -> 0Hz/0ch/??...
[libaf] Adding filter dummy
[dummy] Was reinitialized: 48000Hz/2ch/ac3
[dummy] Was reinitialized: 48000Hz/2ch/ac3
alsa-init: requested format: 48000 Hz, 2 channels, 100
alsa-init: compiled for ALSA-1.0.10rc1
alsa-spdif-init: playing AC3, 2 channels
alsa-init: 1 soundcard found, using: iec958
alsa-init: pcm opend in block-mode
alsa-init: chunksize set to 1024
alsa-init: fragcount=16
alsa-init: got buffersize=65536
alsa: 48000 Hz/2 channels/4 bpf/65536 bytes buffer/Signed 16 bit Little 
Endian
AO: [alsa] 48000Hz 2ch ac3 (1 B/s)
AO: Description: ALSA-0.9.x-1.x audio output
AO: Author: Alex Beregszaszi, Zsolt Barat <joy at streamminister.de>
AO: Comment: under developement
Building audio filter chain for 48000Hz/2ch/ac3 -> 48000Hz/2ch/ac3...
[dummy] Was reinitialized: 48000Hz/2ch/ac3
[dummy] Was reinitialized: 48000Hz/2ch/ac3
Starting playback...
alsa-space: free space = 65536, prepared --
vd_ffmpeg: XVMC-VLD accelerated MPEG2
trying pixfmt=0
[ffmpeg] aspect_ratio: 1.777778
VDec: vo config request - 1920 x 1080 (preferred csp: MPEG1/2 Motion 
Compensation and VLD)
[PP] Using external postprocessing filter, max q = 6.
Trying filter chain: spp scale vo
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
SwScale params: -1 x -1 (-1=no scaling)
Trying filter chain: scale spp scale vo
The selected video_out device is incompatible with this codec.
Also try adding the scale filter, e.g. -vf spp,scale instead of -vf spp.
trying pixfmt=1
*** [spp] Allocating mp_image_t, 1920x1080x0bpp RGB packed, 0 bytes
Only buffers allocated by vo_xvmc allowed
mplayer: vd_ffmpeg.c:1030: mc_get_buffer: Assertion `0' failed.


MPlayer interrupted by signal 6 in module: decode_video
- MPlayer crashed. This shouldn't happen.
  It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
  gcc version. If you think it's MPlayer's fault, please read
  DOCS/HTML/en/bugreports.html and follow the instructions there. We 
can't and
  won't help unless you provide this information when reporting a 
possible bug.
Uninit audio filters...
[libaf] Removing filter dummy
uninit audio: hwac3
uninit video: ffmpeg
alsa-uninit: pcm closed
vo: uninit ...
[root at media mplayer]#


This is on an K8MM-V (K8M800 chipset) with:

[root at media mplayer]# cat /etc/X11/XvMCConfig
libviaXvMC.so.1
[root at media mplayer]#