[MPlayer-users] mp3 playback issue + mailing list url problems

[Frédéric Gobry]

Hi,

Before I forget, I've noticed broken links in the mailman config: the
URL to confirm a subscription is invalid:

  <http://mplayerhq.hu/mailman/confirm/mplayer-users/....>

(and the archive link on the info page which points to the list of
existing archives for all the lists is a bit disturbing)

The real issue:

I've tried to play a mp3 available here:

  <http://morinn.free.fr/BA20050303.mp3>

It's mono, 24KHz. The playback is fine except that the last second
(approximatively) is dropped. If I convert the file to a wav via sox and
play that, it's complete. Converting via mplayer -ao pcm also gives a
truncated file.

I use:

MPlayer 1.0pre6-3.3.4 (C) 2000-2004 MPlayer Team
CPU: Intel Pentium M Banias (Family: 6, Stepping: 5)
Detected cache-line size is 64 bytes
MMX2 supported but disabled
SSE2 supported but disabled
CPUflags:  MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX SSE

(it's the debian package from ftp://ftp.nerim.net/debian-marillat)

Attached is the output from mplayer -v

Thanks for a great piece of software,
Frédéric

-- 
Frédéric Gobry    Infoscience
                  DIT-KIS / EPFL
                  Tel: +41216932288
http://people.epfl.ch/frederic.gobry

-------------- next part --------------
MPlayer 1.0pre6-3.3.4 (C) 2000-2004 MPlayer Team
CPU: Intel Pentium M Banias (Family: 6, Stepping: 5)
Detected cache-line size is 64 bytes
MMX2 supported but disabled
SSE2 supported but disabled
CPUflags:  MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX SSE



73 audio & 180 video codecs
CommandLine: '-v' 'BA20050303.mp3'
init_freetype
get_path('font/font.desc') -> '/home/fred/.mplayer/font/font.desc'
font: can't open file: /home/fred/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars)
Using MMX Optimized OnScreenDisplay
Using Linux hardware RTC timing (1024Hz).
get_path('input.conf') -> '/home/fred/.mplayer/input.conf'
Can't open input config file /home/fred/.mplayer/input.conf: No such file or directory
Parsing input config file /etc/mplayer/input.conf
Input config file /etc/mplayer/input.conf parsed: 59 binds
Can't init input joystick
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : No such file or directory
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support.
You will not be able to use your remote control.
get_path('BA20050303.mp3.conf') -> '/home/fred/.mplayer/BA20050303.mp3.conf'
Playing BA20050303.mp3.
[file] File size is 1051696 bytes
STREAM: [file] BA20050303.mp3
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
CACHE_PRE_INIT: 0 [0] 0  pre:0  eof:1040384  
Checking for YUV4MPEG2
ASF_check: not ASF guid!
Checking for Nullsoft Streaming Video
Checking for NuppelVideo
Checking for REAL
Checking for SMJPEG
Searching demuxer type for filename BA20050303.mp3 ext: .mp3
Trying demuxer 17 based on filename extension
==> Found audio stream: 0
demux_audio: seeking from 0x100BB3 to start pos 0x88
demux_audio: audio data 0x88 - 0x100C30  
Audio file detected.
==========================================================================
Trying to force audio codec driver family libmad...
Opening audio decoder: [libmad] libmad mpeg audio decoder
dec_audio: Allocating 4096 bytes for input buffer.
dec_audio: Allocating 9216 + 65536 = 74752 bytes for output buffer.
AUDIO: 24000 Hz, 1 ch, 16 bit (0x10), ratio: 5000->48000 (40.0 kbit)
Selected audio codec: [mad] afm:libmad (libMAD MPEG layer 1-2-3)
==========================================================================
Checking audio filter chain for 24000Hz/1ch/16bit -> 24000Hz/2ch/16bit...
[libaf] Adding filter dummy 
[dummy] Was reinitialized, rate=24000Hz, nch = 1, format = 0x00000001 and bps = 2
AF_pre: af format: 2 bps, 1 ch, 24000 hz, little endian signed int 
AF_pre: 24000Hz 1ch Signed 16-bit (Little-Endian)
alsa-init: requested format: 24000 Hz, 2 channels, Signed 16-bit (Little-Endian)
alsa-init: compiled for ALSA-1.0.7
alsa-init: setup for 1/2 channel(s)
alsa-init: got device=0, subdevice=0
alsa-init: 1 soundcard found, using: default
alsa-init: pcm opend in block-mode
alsa-init: chunksize set to 1024
alsa-init: fragcount=16
alsa-init: got buffersize=65536
alsa: 24000 Hz/2 channels/4 bpf/65536 bytes buffer/Signed 16 bit Little Endian
AO: [alsa] 24000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
AO: Description: ALSA-0.9.x-1.x audio output
AO: Author: Alex Beregszaszi, Zsolt Barat <joy at streamminister.de>
AO: Comment: under developement
Building audio filter chain for 24000Hz/1ch/16bit -> 24000Hz/2ch/16bit...
[dummy] Was reinitialized, rate=24000Hz, nch = 1, format = 0x00000001 and bps = 2
[libaf] Adding filter channels 
[channels] Changing number of channels to 2
[dummy] Was reinitialized, rate=24000Hz, nch = 1, format = 0x00000001 and bps = 2
Video: no video
Freeing 0 unused video chunks.
Starting playback...
alsa-space: free space = 65536, prepared --
[libaf] Reallocating memory in module channels, old len = 0, new len = 65534

....

[libaf] Removing filter dummy 
[libaf] Removing filter channels 
uninit audio: libmad
alsa-uninit: pcm closed
vo: x11 uninit called but X11 not inited..

Exiting... (Quit)