[MPlayer-users] (no subject)

Francisco Gracia AHufinger i82grahf at uco.es
Fri Jun 4 17:16:25 CEST 2004


Thank you very much. I tray it from the command line ans it works. CAn you explain me what is .ao arts to try to solve the problem from the gui?

Thanks again.

On Fri, 4 Jun 2004 16:48:44 +0200
"Sascha Sommer" <saschasommer at freenet.de> wrote:

> > I do the x11 selection but I still can't see anything, the program do the
> same as if i click on a video file.
> >
> > If, from the command line I type "mplayer file" next sequence of comand
> are displaying:
> >
> >
> > MPlayer 1.0pre4-3.3.3 (C) 2000-2004 MPlayer Team
> >
> > CPU: Intel Pentium 4/Xeon/Celeron Northwood 2799 MHz (Family: 8, Stepping:
> 3)
> > Detected cache-line size is 64 bytes
> > CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
> > Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2
> >
> > Reading config file /usr/local/etc/mplayer/mplayer.conf: No existe el
> fichero o el directorio
> > Reading config file /home/fgracia/.mplayer/config
> > Reading /home/fgracia/.mplayer/codecs.conf: Can't open
> '/home/fgracia/.mplayer/codecs.conf': No existe el fichero o el directorio
> > Reading /usr/local/etc/mplayer/codecs.conf: Can't open
> '/usr/local/etc/mplayer/codecs.conf': No existe el fichero o el directorio
> > Using built-in default codecs.conf.
> > font: can't open file: /home/fgracia/.mplayer/font/font.desc
> > Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206
> chars)
> > Failed to open /dev/rtc: Permiso denegado (/dev/rtc should be readable by
> the user.)
> > Using usleep() timing
> > Can't open input config file /home/fgracia/.mplayer/input.conf: No existe
> el fichero o el directorio
> > Can't open input config file /usr/local/etc/mplayer/input.conf: No existe
> el fichero o el directorio
> > Falling back on default (hardcoded) input config
> > Setting up LIRC support...
> > mplayer: could not connect to socket
> > mplayer: Permiso denegado
> > Failed to open LIRC support.
> > You will not be able to use your remote control.
> >
> > Playing Alejandro.Sanz.-.MTV.Unplugged.[www.elmejorwarez.org].avi.
> > AVI: Missing video stream!? Contact the author, it may be a bug :(
> > OGG file format detected.
> > ==========================================================================
> > Opening audio decoder: [libvorbis] Ogg/Vorbis audio decoder
> > AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 32000->192000 (256,0 kbit)
> > Selected audio codec: [vorbis] afm:libvorbis (OggVorbis Audio Decoder)
> > ==========================================================================
> > vo: X11 running at 1280x1024 with depth 24 and 32 bpp (":0.0" => local
> display)
> > ==========================================================================
> > Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
> > Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
> > ==========================================================================
> > Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
> > AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
> > AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
> > audio_setup: Can't open audio device /dev/dsp: Dispositivo o recurso
> ocupado
> > alsa-init: requested format: 48000 Hz, 2 channels, Signed 16-bit
> (Little-Endian)
> > alsa-init: 1 soundcard found, using: hw:0,0
> >
> 
> Probably arts or whatever is blocking your soundcard. Try -ao arts on
> commandline.
> You can probably change this in the gui preferences for the gui, too.
> 
> Sascha
> 
> _______________________________________________
> MPlayer-users mailing list
> MPlayer-users at mplayerhq.hu
> http://mplayerhq.hu/mailman/listinfo/mplayer-users




More information about the MPlayer-users mailing list