[MPlayer-users] dxr3 lavc mplayer 1x

[marco puszina]

hi anders,

doesn't make any difference - even with nosound the same problem ...

>
> The command works fine here for mpeg[124] with latest CVS. Try with -ao
> oss.


mplayer -vo dxr3 -ao oss  -vf lavc AkteX-6X01-Der.Anfang.
\[German-VCD.by.TEDC\].mpg
MPlayer 1.0pre3-3.3.2 (C) 2000-2003 MPlayer Team

CPU: Advanced Micro Devices Athlon 4 /Athlon MP/XP Palomino 1461 MHz (Family: 
6, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE

Reading config file /usr//etc/mplayer/mplayer.conf: Datei oder Verzeichnis 
nicht gefunden
Reading config file /home/marcooo/.mplayer/config
Reading /home/marcooo/.mplayer/codecs.conf: 61 audio & 169 video codecs
Font /home/marcooo/.mplayer/font/font.desc loaded successfully! (206 chars)
Failed to open /dev/rtc: Keine Berechtigung (mplayer should be setuid root 
or /dev/rtc should be readable by the user.)
Using usleep() timing
Input config file /home/marcooo/.mplayer/input.conf parsed: 51 binds
Setting up LIRC support...

Playing AkteX-6X01-Der.Anfang.[German-VCD.by.TEDC].mpg.
LMLM4 Stream Format not found
MPEG-PS file format detected.
VIDEO:  MPEG1  352x288  (aspect 8)  25,000 fps  1150,0 kbps (143,8 kbyte/s)
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 28000->176400 (224,0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
VO: [dxr3] Opened /dev/em8300-0.
VO: [dxr3] Opened /dev/em8300_mv-0.
VO: [dxr3] Opened /dev/em8300_sp-0.
Opening video filter: [lavc]
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 352 x 288 (preferred csp: Mpeg PES)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.3.1
Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2))
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
Starting playback...
VDec: vo config request - 352 x 288 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1,33:1 - prescaling to correct movie aspect.
VO: [dxr3] 352x288 => 384x288 Mpeg PES
VO: [dxr3] Setting up for PAL/SECAM.
aspect: Warning: no suitable new res found!
VO: [dxr3] Setting aspect ratio to 4:3.
VDec: vo config request - 352 x 288 (preferred csp: Planar YV12) 2 0 0%
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1,33:1 - prescaling to correct movie aspect.
Could not open codec.
FATAL: Cannot initialize video driver.

FATAL: Could not initialize video filters (-vf) or video output (-vo).

VO: [dxr3] Uninitializing.

Exiting... (End of file)