[MPlayer-users] DVB Input does not work
Philipp Wollermann
phil_wo at gmx.net
Mon Apr 5 10:47:56 CEST 2004
Hi!
Here is the log! :) I tried to change the channel again and it didn't
work (I marked the lines in the log, where I pressed Page-Up and
Page-Down, to see the next/previous channel)
Thanks for the first patch, now I can watch TV without having to hack
around at last.. :)
Philipp
[philwo at erazor philwo]$ mplayer -v dvb://
Using GNU internationalization
Original domain: messages
Original dirname: /usr/share/locale
Current domain: mplayer
Current dirname: /usr/local/share/locale
MPlayer dev-CVS-040404-12:26-3.3.2 (C) 2000-2004 MPlayer Team
CPU: Advanced Micro Devices Athlon 4 /Athlon MP/XP Palomino 1536 MHz
(Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE
Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file or
directory
Reading config file /home/philwo/.mplayer/config
Reading /home/philwo/.mplayer/codecs.conf: 64 audio & 172 video codecs
CommandLine: '-v' 'dvb://'
init_freetype
get_path('font/font.desc') -> '/home/philwo/.mplayer/font/font.desc'
font: can't open file: /home/philwo/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Using Linux hardware RTC timing (1024Hz).
get_path('input.conf') -> '/home/philwo/.mplayer/input.conf'
Can't open input config file /home/philwo/.mplayer/input.conf: No such
file or directory
Can't open input config file /usr/local/etc/mplayer/input.conf: No such
file or directory
Falling back on default (hardcoded) input config
get_path('.conf') -> '/home/philwo/.mplayer/.conf'
Playing dvb://.
TUNER TYPE SEEMS TO BE DVB-S
OPEN_DVB: prog=, card=1, type=1, vid=0, aid=0
get_path('channels.conf.sat') -> '/home/philwo/.mplayer/channels.conf.sat'
get_path('channels.conf') -> '/home/philwo/.mplayer/channels.conf'
CONFIG_READ FILE: /home/philwo/.mplayer/channels.conf, type: 1
NUM: 0, NUM_FIELDS: 8, NAME: ProSieben, FREQ: 12480000, SRATE: 27500000,
POL: V, DISEQC: 0, TONE: -1, VPID: 255, APID1: 256, APID2: 0, TPID: 898,
PROGID: 0
NUM: 1, NUM_FIELDS: 8, NAME: KABEL1, FREQ: 12480000, SRATE: 27500000,
POL: V, DISEQC: 0, TONE: -1, VPID: 511, APID1: 512, APID2: 0, TPID: 899,
PROGID: 0
NUM: 2, NUM_FIELDS: 8, NAME: SAT.1, FREQ: 12480000, SRATE: 27500000,
POL: V, DISEQC: 0, TONE: -1, VPID: 1791, APID1: 1792, APID2: 0, TPID:
46, PROGID: 0
NUM: 3, NUM_FIELDS: 8, NAME: N24, FREQ: 12480000, SRATE: 27500000, POL:
V, DISEQC: 0, TONE: -1, VPID: 2047, APID1: 2048, APID2: 0, TPID: 47,
PROGID: 0
NUM: 4, NUM_FIELDS: 8, NAME: ARTE, FREQ: 11567000, SRATE: 22000000, POL:
V, DISEQC: 0, TONE: -1, VPID: 167, APID1: 136, APID2: 0, TPID: 9019,
PROGID: 0
NUM: 5, NUM_FIELDS: 8, NAME: ZDF, FREQ: 11953000, SRATE: 27500000, POL:
H, DISEQC: 0, TONE: -1, VPID: 110, APID1: 120, APID2: 0, TPID: 28006,
PROGID: 0
NUM: 6, NUM_FIELDS: 8, NAME: 3sat, FREQ: 11953000, SRATE: 27500000, POL:
H, DISEQC: 0, TONE: -1, VPID: 210, APID1: 220, APID2: 0, TPID: 28007,
PROGID: 0
NUM: 7, NUM_FIELDS: 8, NAME: RTL Television, FREQ: 12187000, SRATE:
27500000, POL: H, DISEQC: 0, TONE: -1, VPID: 163, APID1: 104, APID2: 0,
TPID: 12003, PROGID: 0
NUM: 8, NUM_FIELDS: 8, NAME: RTL2, FREQ: 12187000, SRATE: 27500000, POL:
H, DISEQC: 0, TONE: -1, VPID: 166, APID1: 128, APID2: 0, TPID: 12020,
PROGID: 0
NUM: 9, NUM_FIELDS: 8, NAME: Super RTL, FREQ: 12187000, SRATE: 27500000,
POL: H, DISEQC: 0, TONE: -1, VPID: 165, APID1: 120, APID2: 0, TPID:
12040, PROGID: 0
NUM: 10, NUM_FIELDS: 8, NAME: VOX, FREQ: 12187000, SRATE: 27500000, POL:
H, DISEQC: 0, TONE: -1, VPID: 167, APID1: 136, APID2: 0, TPID: 12060,
PROGID: 0
NUM: 11, NUM_FIELDS: 8, NAME: Das Erste, FREQ: 11836000, SRATE:
27500000, POL: H, DISEQC: 0, TONE: -1, VPID: 101, APID1: 102, APID2: 0,
TPID: 28106, PROGID: 0
NUM: 12, NUM_FIELDS: 8, NAME: Bayerisches FS, FREQ: 11836000, SRATE:
27500000, POL: H, DISEQC: 0, TONE: -1, VPID: 201, APID1: 202, APID2: 0,
TPID: 28107, PROGID: 0
NUM: 13, NUM_FIELDS: 8, NAME: arte, FREQ: 11836000, SRATE: 27500000,
POL: H, DISEQC: 0, TONE: -1, VPID: 401, APID1: 402, APID2: 0, TPID:
28109, PROGID: 0
NUM: 14, NUM_FIELDS: 8, NAME: WDR Köln, FREQ: 11836000, SRATE: 27500000,
POL: H, DISEQC: 0, TONE: -1, VPID: 601, APID1: 602, APID2: 0, TPID:
28111, PROGID: 0
NUM: 15, NUM_FIELDS: 8, NAME: Phoenix, FREQ: 11836000, SRATE: 27500000,
POL: H, DISEQC: 0, TONE: -1, VPID: 901, APID1: 902, APID2: 0, TPID:
28114, PROGID: 0
code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001
Released under the GPL.
Latest version available from http://www.linuxstb.org/
PROG: ProSieben, CARD: 1, VID: 0, AID: 0, TYPE: , FILE: (null)
PROGRAM NUMBER 0: name=ProSieben, vid=255, aid=256, freq=12480000,
srate=27500000, pol=V, diseqc: 0, tone: -1
DVB_SET_CHANNEL: channel 0
DVB_SET_CHANNEL: new channel name=ProSieben
DIFFERENT TUNING THAN THE PREVIOUS: -> 0|012480000|027500000|0|V
dvb_tune Freq: 12480000
TUNE_IT, fd_frontend 7, fd_sec 0
freq 12480000, srate 27500000, pol V, tone -1, specInv, diseqc 0,
fe_modulation_t modulation,fe_code_rate_t HP_CodeRate,
fe_transmit_mode_t TransmissionMode,fe_guard_interval_t guardInterval,
fe_bandwidth_t bandwidth
Using DVB card "STV0299/TSA5059/SL1935 based"
tuning DVB-S to Freq: 1880000, Pol: V Srate: 27500000, 22kHz: on, LNB: 0
DISEQC SETTING SUCCEDED
polling....
Getting frontend event
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI
FE_HAS_SYNC
Event: Frequency: 12480310
SymbolRate: 27500000
FEC_inner: 3
Bit error rate: 65280
Signal strength: 47041
SNR: 57315
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI
FE_HAS_SYNC
SET PES FILTER ON PID 255 to fd 8, RESULT: 0, ERRNO: 75
SET PES FILTER ON PID 256 to fd 9, RESULT: 0, ERRNO: 75
SUCCESSFUL EXIT from dvb_streaming_start
STREAM: [dvbin] dvb://
STREAM: Description: Dvb Input
STREAM: Author: Nico
STREAM: Comment: based on the code from ??? (probably Arpi)
Checking for YUV4MPEG2
DEMUXER: freeing demuxer at 0x8674a60
ASF_check: not ASF guid!
DEMUXER: freeing demuxer at 0x8674a60
Checking for NuppelVideo
DEMUXER: freeing demuxer at 0x8674a60
Checking for REAL
DEMUXER: freeing demuxer at 0x8674a60
Checking for SMJPEG
DEMUXER: freeing demuxer at 0x8674a60
DEMUXER: freeing demuxer at 0x86752c8
DEMUXER: freeing demuxer at 0x86752c8
Searching demuxer type for filename dvb:// ext: (null)
Checking for MOV
DEMUXER: freeing demuxer at 0x86752c8
Checking for VIVO
header block 1 size: 0
DEMUXER: freeing demuxer at 0x86752c8
DEMUXER: freeing demuxer at 0x86752c8
DEMUXER: freeing demuxer at 0x86752c8
DEMUXER: freeing demuxer at 0x86752c8
DEMUXER: freeing demuxer at 0x86752c8
DEMUXER: freeing demuxer at 0x86752c8
DEMUXER: freeing demuxer at 0x86752c8
Checking for PVA
DEMUXER: freeing demuxer at 0x86752c8
Checking for MPEG-TS...
TRIED UP TO POSITION 6204, FOUND 47, packet_size= 188, SEEMS A TS? 1
GOOD CC: 32, BAD CC: 0
TS file format detected.
DEMUX OPEN, AUDIO_ID: -1, VIDEO_ID: -1, SUBTITLE_ID: -1,
Checking for MPEG-TS...
TRIED UP TO POSITION 34216, FOUND 47, packet_size= 188, SEEMS A TS? 1
GOOD CC: 32, BAD CC: 0
PROBING UP TO 2000000, PROG: 0
New TS pid=255
New TS pid=256
VIDEO MPEG2(pid=255)...AUDIO MP2(pid=256) NO SUBS (yet)! PROGRAM N. 0
==> Found video stream: 0
==> Found audio stream: 0
Opened TS demuxer, audio: 50(pid 256), video: 10000002(pid 255)...POS=43240
Searching for sequence header...
New TS pid=255
New TS pid=256
OK!
VIDEO: MPEG2 720x576 (aspect 2) 25,000 fps 15000,0 kbps (1875,0
kbyte/s)
[V] filefmt:29 fourcc:0x10000002 size:720x576 fps:25,00 ftime:=0,0400
get_path('sub/') -> '/home/philwo/.mplayer/sub/'
get_path('default.sub') -> '/home/philwo/.mplayer/default.sub'
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer.
mp3lib: made decode tables with MMX optimization
mp3lib: using 3DNow!Ex optimized decore!
MP3lib: init layer2&3 finished, tables done
MPEG 1.0, Layer II, 48000 Hz 192 kbit Stereo, BPF: 576
Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0
AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 24000->192000 (192,0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
X11 opening display: :0.0
vo: X11 color mask: FFFFFF (R:FF0000 G:FF00 B:FF)
vo: X11 running at 1280x1024 with depth 24 and 32 bpp (":0.0" => local
display)
[x11] Detected wm supports NetWM.
[x11] Detected wm supports FULLSCREEN state.
[x11] Detected wm supports ABOVE state.
[x11] Detected wm supports BELOW state.
[x11] Detected wm supports STAYS_ON_TOP state.
[x11] Current fstype setting honours FULLSCREEN STAYS_ON_TOP ABOVE BELOW
X atoms
Disabling DPMS
DPMSDisable stat: 1
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 720 x 576 (preferred csp: Mpeg PES)
Trying filter chain: vo
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
SwScale params: -1 x -1 (-1=no scaling)
Trying filter chain: scale vo
The selected video_out device is incompatible with this codec.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.3.1
Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2))
==========================================================================
Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
[libaf] Adding filter dummy
[dummy] Was reinitialized, rate=48000Hz, nch = 2, format = 0x00000001
and bps = 2
AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
ao2: 48000 Hz 2 chans Signed 16-bit (Little-Endian)
audio_setup: using '/dev/sound/dsp' dsp device
audio_setup: using '/dev/sound/mixer' mixer device
audio_setup: using 'pcm' mixer device
audio_setup: sample format: Signed 16-bit (Little-Endian) (requested:
Signed 16-bit (Little-Endian))
audio_setup: using 2 channels (requested: 2)
audio_setup: using 48000 Hz samplerate (requested: 48000)
audio_setup: frags: 8/8 (8192 bytes/frag) free: 65536
AO: [oss] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
AO: Description: OSS/ioctl audio output
AO: Author: A'rpi
Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
[dummy] Was reinitialized, rate=48000Hz, nch = 2, format = 0x00000001
and bps = 2
[dummy] Was reinitialized, rate=48000Hz, nch = 2, format = 0x00000001
and bps = 2
Starting playback...
VDec: vo config request - 720 x 576 (preferred csp: Planar YV12)
Trying filter chain: vo
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1,33:1 - prescaling to correct movie aspect.
VO Config (720x576->768x576,flags=0,'MPlayer',0x32315659)
VO: [xv] 720x576 => 768x576 Planar YV12
VO: Description: X11/Xv
VO: Author: Gerd Knorr <kraxel at goldbach.in-berlin.de> and others
Xvideo image format: 0x32595559 (YUY2) packed
Xvideo image format: 0x59565955 (UYVY) packed
Xvideo image format: 0x32315659 (YV12) planar
Xvideo image format: 0x30323449 (I420) planar
using Xvideo port 116 for hw scaling
[xv] dx: 0 dy: 0 dw: 768 dh: 614
*** [vo] Allocating mp_image_t, 720x576x12bpp YUV planar, 622080 bytes
[xv] dx: 0 dy: 0 dw: 768 dh: 614
*** [vo] Allocating mp_image_t, 720x576x12bpp YUV planar, 622080 bytes0 0%
get_path('subfont.ttf') -> '/home/philwo/.mplayer/subfont.ttf'
Unicode font: 679 glyphs.
*** [vo] Allocating mp_image_t, 720x576x12bpp YUV planar, 622080 bytes 0%
ts_parse: PID=255, Transport error: 0, CC_OK: no139 11% 7% 29,8% 0 0
0% <== I pressed "Page-Up" here
ts_parse: PID=255, Transport error: 0, CC_OK: no179 9% 5% 29,1% 0 0
0% <== I pressed "Page-Down" here
Uninit audio filters...: -0,016 ct: 0,192 232/232 9% 6% 65,5% 1 0 0%%
[libaf] Removing filter dummy
uninit audio: mp3lib
uninit video: libmpeg2
DEMUXER: freeing demuxer at 0x86752c8
DEMUXER: freeing sh_audio at 0x8668fe8
DEMUXER: freeing sh_video at 0x8668f50
Successfully enabled DPMS
vo: uninit ...
Exiting... (Quit)
Nico wrote:
> Philipp Wollermann wrote:
>
>> Hi,
>>
>> the logfile wasn't trimmed, it was the complete output of mplayer. :)
>> Anyway, I just updated my CVS, saw that there was some patch
>> concerning dvbin.c, re-compiled it and ... now it works! Seems like
>> somebody fixed the problem already. :)
>
>
> me :)
>
>> I can't switch channels however, but this may be due to my
>> configuration - I'll try again tomorrow. :)
>>
>> Philipp
>>
>
> ok, please post the log.
>
>
> Nico
>
> _______________________________________________
> MPlayer-users mailing list
> MPlayer-users at mplayerhq.hu
> http://mplayerhq.hu/mailman/listinfo/mplayer-users
>
>
More information about the MPlayer-users
mailing list