[MPlayer-users] DVB Input does not work

[Nico]

Philipp Wollermann wrote:

> Hi,
>
> I can't use mplayer to watch TV with my Technotrend DVB-S card using 
> the dvbin plugin. The following does work but is uncomfortable:
>
> szap -c ~/mychannels.conf -r "ProSieben" &
> mplayer - < /dev/dvb/adapter0/dvr0
>
> Using mplayer's builtin DVB support doesn't work:
>
> [philwo at erazor philwo]$ mplayer -v -v -v -dvbin file=~/mychannels.conf 
> dvb://
> Using GNU internationalization
> Original domain: messages
> Original dirname: /usr/share/locale
> Current domain: mplayer
> Current dirname: /usr/local/share/locale
>
> MPlayer dev-CVS-040404-12:26-3.3.2 (C) 2000-2004 MPlayer Team
>
> CPU: Advanced Micro Devices Athlon 4 /Athlon MP/XP Palomino 1536 MHz 
> (Family: 6, Stepping: 2)
> Detected cache-line size is 64 bytes
> CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
> Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE
>
> Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file 
> or directory
> Reading config file /home/philwo/.mplayer/config
> Reading /home/philwo/.mplayer/codecs.conf: 64 audio & 172 video codecs
> CommandLine: '-v' '-v' '-v' '-dvbin' 
> 'file=/home/philwo/mychannels.conf' 'dvb://'
> init_freetype
> get_path('font/font.desc') -> '/home/philwo/.mplayer/font/font.desc'
> font: can't open file: /home/philwo/.mplayer/font/font.desc
> font: can't open file: /usr/local/share/mplayer/font/font.desc
> Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
> Using Linux hardware RTC timing (1024Hz).
> get_path('input.conf') -> '/home/philwo/.mplayer/input.conf'
> Can't open input config file /home/philwo/.mplayer/input.conf: No such 
> file or directory
> Can't open input config file /usr/local/etc/mplayer/input.conf: No 
> such file or directory
> Falling back on default (hardcoded) input config
> get_path('.conf') -> '/home/philwo/.mplayer/.conf'
>
> [[[init getch2]]]
>
> Playing dvb://.
> TUNER TYPE SEEMS TO BE DVB-S
> OPEN_DVB: prog=, card=1, type=1, vid=0, aid=0
> CONFIG_READ FILE: /home/philwo/mychannels.conf, type: 1
> code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001
> Released under the GPL.
> Latest version available from http://www.linuxstb.org/
> PROG: Phoenix, CARD: 1, VID: 0, AID: 0, TYPE: , FILE: 
> /home/philwo/mychannels.conf
>
>
> DVBIN: no such channel "Phoenix"
>
> Failed to open dvb://
>
>
> *** uninit(0x8)
>
> [[[uninit getch2]]]
> Config poped level=2
> Config poped level=1
>
> *** uninit(0x80)
> vo: x11 uninit called but X11 not inited..
>
> Exiting... (End of file)
> max framesize was 0 bytes
>
> I've attached the mychannels.conf to the mail. I created it using 
> "./scan -x 0 -t 1 -l UNIVERSAL dvb-s/Astra-19.2E | tee 
> /home/philwo/mychannels.conf".
>
> Philipp
>
>------------------------------------------------------------------------
>
>ProSieben:12480:v:0:27500:255:256:898
>KABEL1:12480:v:0:27500:511:512:899
>SAT.1:12480:v:0:27500:1791:1792:46
>N24:12480:v:0:27500:2047:2048:47
>ARTE:11567:v:0:22000:167:136:9019
>ZDF:11953:h:0:27500:110:120:28006
>3sat:11953:h:0:27500:210:220:28007
>RTL Television:12187:h:0:27500:163:104:12003
>RTL2:12187:h:0:27500:166:128:12020
>Super RTL:12187:h:0:27500:165:120:12040
>VOX:12187:h:0:27500:167:136:12060
>Das Erste:11836:h:0:27500:101:102:28106
>Bayerisches FS:11836:h:0:27500:201:202:28107
>arte:11836:h:0:27500:401:402:28109
>WDR Köln:11836:h:0:27500:601:602:28111
>Phoenix:11836:h:0:27500:901:902:28114
>  
>

the file is correct but I can't understand what is going on if you trim 
the log. Use -v -v, please.

    Nico