[MPlayer-users] -ss

Sat Dec 27 23:58:16 CET 2003

Le 12/27/2003 09:31 PM, tarass at club-internet.fr a joliment écrit :

Hello,

I encoded with lavc 3 pass method and burned six movies but I did 
something wrong after:

> I tried to cut the beginig and the end of my file with avidemux, but it 
> can't save the video cleanly: if I use smart copy the video is shaky and 
> I loose the correct resolution, if I don't use smart copy the video is not
 > shaky but the resolution is lost.

When I read such a movie mplayer says :

MPlayer dev-CVS-031130-11:22-3.2.2 (C) 2000-2003 MPlayer Team

CPU: Advanced Micro Devices Athlon 4 /Athlon MP/XP Palomino 1468 MHz 
(Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE

Reading config file /usr/local/etc/mplayer/mplayer.conf: Aucun fichier 
ou répertoire de ce type
Reading config file /home/nico/.mplayer/config
Reading /home/nico/.mplayer/codecs.conf: Can't open 
'/home/nico/.mplayer/codecs.conf': Aucun fichier ou répertoire de ce type
Reading /usr/local/etc/mplayer/codecs.conf: Can't open 
'/usr/local/etc/mplayer/codecs.conf': Aucun fichier ou répertoire de ce type
Using built-in default codecs.conf.
CommandLine: 'film.avi' '-v'
get_path('font/font.desc') -> '/home/nico/.mplayer/font/font.desc'
Font /home/nico/.mplayer/font/font.desc loaded successfully! (206 chars)
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Using Linux hardware RTC timing (1024Hz).
get_path('input.conf') -> '/home/nico/.mplayer/input.conf'
Can't open input config file /home/nico/.mplayer/input.conf: Aucun 
fichier ou répertoire de ce type
Can't open input config file /usr/local/etc/mplayer/input.conf: Aucun 
fichier ou répertoire de ce type
Falling back on default (hardcoded) input config
get_path('film.avi.conf') -> '/home/nico/.mplayer/film.avi.conf'

Playing film.avi.
[file] File size is 1257454294 bytes
STREAM: [file] film.avi
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
CACHE_PRE_INIT: 0 [0] 0  pre:0  eof:0
  Cache fill:  0,00% (0 bytes)    AVI file format detected.
list_end=0x20A0
======= AVI Header =======
us/frame: 40000  (fps=25,000)
max bytes/sec: 0
padding: 0
MainAVIHeader.dwFlags: (272) HAS_INDEX IS_INTERLEAVED
frames  total: 144046   initial: 0
streams: 2
Suggested BufferSize: 0
Size:  526 x 476
==========================
list_end=0x107C
==> Found video stream: 0
====== STREAM Header =====
Type: vids   FCC: DIVX (58564944)
Flags: 0
Priority: 0   Language: 0
InitialFrames: 0
Rate: 25000/1000 = 25,000
Start: 0   Len: 144046
Suggested BufferSize: 90705
Quality 0
Sample size: 0
==========================
found 'bih', 40 bytes of 40
======= VIDEO Format ======
   biSize 40
   biWidth 526
   biHeight 476
   biPlanes 1
   biBitCount 24
   biCompression 1482049860='DIVX'
   biSizeImage 751128
===========================
Regenerating keyframe table for DIVX 4 video
list_end=0x20A0
==> Found audio stream: 1
====== STREAM Header =====
Type: auds   FCC:  (0)
Flags: 0
Priority: 0   Language: 0
InitialFrames: 1
Rate: 40000/1 = 40000,000
Start: 0   Len: 230473920
Suggested BufferSize: 8000
Quality -1
Sample size: 1
==========================
found 'wf', 32 bytes of 18
======= WAVE Format =======
Format Tag: 85 (0x55)
Channels: 2
Samplerate: 48000
avg byte/sec: 40000
Block align: 1
bits/sample: 0
cbSize: 12
mp3.wID=1
mp3.fdwFlags=0x2
mp3.nBlockSize=384
mp3.nFramesPerBlock=1
mp3.nCodecDelay=0
===========================
list_end=0x4AACE50E
Found movie at 0x20AC - 0x4AACE50E
Reading INDEX block, 288092 chunks for 144046 frames (fpos=0x4aace516)
AVI index offset: 0x20A8 (movi=0x20AC idx0=0x4 idx1=0x1072)
Auto-selected AVI video ID = 0
Auto-selected AVI audio ID = 1
AVI: Searching for audio stream (id:1)
XXX initial  v_pts=0,000  a_pos=0 (0,000)
AVI video size=1019985887 (144046) audio size=230473598 (230473598)
VIDEO:  [DIVX]  526x476  24bpp  25,000 fps  1416,2 kbps (172,9 kbyte/s)
[V] filefmt:3  fourcc:0x58564944  size:526x476  fps:25,00  ftime:=0,0400
get_path('sub/') -> '/home/nico/.mplayer/sub/'
get_path('default.sub') -> '/home/nico/.mplayer/default.sub'
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer.
mp3lib: made decode tables with MMX optimization
mp3lib: using 3DNow!Ex optimized decore!
MP3lib: init layer2&3 finished, tables done
  MPEG 1.0, Layer III, 48000 Hz 320 kbit Stereo, BPF: 960
Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0
AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 40000->192000 (320,0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
INFO: libavcodec init OK!
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
==========================================================================
Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
[libaf] Adding filter dummy
[dummy] Was reinitialized, rate=48000Hz, nch = 2, format = 0x00000001 
and bps = 2
AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
ao2: 48000 Hz  2 chans  Signed 16-bit (Little-Endian)
audio_setup: using '/dev/dsp' dsp device
audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: 
Signed 16-bit (Little-Endian))
audio_setup: using 2 channels (requested: 2)
audio_setup: using 48000 Hz samplerate (requested: 48000)
audio_setup: frags:  16/16  (4096 bytes/frag)  free:  65536
AO: [oss] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
AO: Description: OSS/ioctl audio output
AO: Author: A'rpi
Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
[dummy] Was reinitialized, rate=48000Hz, nch = 2, format = 0x00000001 
and bps = 2
[dummy] Was reinitialized, rate=48000Hz, nch = 2, format = 0x00000001 
and bps = 2
Starting playback...
[ffmpeg] aspect_ratio: 1,105042
VDec: vo config request - 526 x 476 (preferred csp: Planar YV12)
Trying filter chain: vo
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1,11:1 - prescaling to correct movie aspect.
VO Config (526x476->526x476,flags=0,'MPlayer',0x32315659)
VO: [mga] 526x476 => 526x476 Planar YV12
VO: Description: Matrox G200/G4x0/G550 overlay (/dev/mga_vid)
VO: Author: A'rpi
VO: Comment: Based on some code by Aaron Holtzman 
<aholtzma at ess.engr.uvic.ca>
vo_mga aspect(): resized to 526x476
[mga] Using 3 buffers.
*** [vo] Allocating (slices) mp_image_t, 528x480x12bpp YUV planar, 
380160 bytes
[libaf] Removing filter dummy
uninit audio: mp3lib
uninit video: ffmpeg
DEMUXER: freeing demuxer at 0x86a8548
vo: uninit!
vo: x11 uninit called but X11 not inited..

Exiting... (Quit)

I there a way to look at my movies or must I forget them ?

Thanks.

Nicolas.

-- 
    Powered           .~.
    by Linux          /V\
     ------          // \\
  solutions for     /(   )\
  smart penguins     ^`~'^