[MPlayer-users] xvidix problem

Michal Semler cijoml at volny.cz
Sun May 5 14:52:01 CEST 2002


Hello,
there is a problem with xvidix driver in 0.9pre3 version and previous (didnt 
test last CVS).

It was found as a bug and reproduced by other users, but it is still not 
repaired.

When I try play film with non standard resolution (like Gladiator) on 
fullscreen, it play it fast as hell, but around the film I see PING color. 
I cant see at it longer then 5 minutes. Can u change color to BLACK?

notas:~07:01pm > lspci -vs 01:00.0
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 
2x (rev 64) (prog-if 00 [VGA])
        Subsystem: Dell Computer Corporation: Unknown device 00bb
        Flags: bus master, stepping, medium devsel, latency 32, IRQ 11
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        I/O ports at ec00 [size=256]
        Memory at fcfff000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at <unassigned> [disabled] [size=128K]
        Capabilities: <available only to root>
notas:~07:01pm > more /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 8
model name      : Pentium III (Coppermine)
stepping        : 6
cpu MHz         : 497.838
cache size      : 256 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov 
pat pse36 mmx fxsr sse
bogomips        : 992.87

MPlayer 0.90pre1.1-3.0.4 (C) 2000-2002 Arpad Gereoffy (see DOCS!)

CPU vendor name: GenuineIntel  max cpuid level: 2
CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Type: 6, Stepping: 6)
Testing OS support for SSE... yes.
Testing OS support for SSE unmasked exceptions... yes.
Tests of OS support for SSE passed.
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled with RUNTIME CPU Detection - warning, it's not optimal! To get best 
performance, recompile mplayer from sources with 
--disable-runtime-cpudetection
Reading /home/cijoml/.mplayer/codecs.conf: can't open 
'/home/cijoml/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/share/mplayer/codecs.conf: 31 audio & 81 video codecs
font: can't open file: /home/cijoml/.mplayer/font/font.desc
Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
Using Linux's hardware RTC timing (1024Hz)
Can't open input config file /home/cijoml/.mplayer/input.conf : No such file 
or directory
Falling back on default (hardcoded) config
Playing /cdrom/Gladiator_CD1.avi
Can't open IFO file: No such file or directory
Not an URL!
Detected AVI file format!
list_end=0x2292
MainAVIHeader.dwFlags: (272) HAS_INDEX IS_INTERLEAVED
list_end=0x10F4
list_end=0x2186
list_end=0x2292
list_end=0x2BA18BC8
VIDEO:  [DIV3]  640x304  24bpp  25.00 fps  1194.4 kbps (145.8 kbyte/s)
[V] filefmt:3  fourcc:0x33564944  size:640x304  fps:25.00  ftime:=0.0400
SUB: Detected subtitle file format: microdvd
SUB: Read 1269 subtitles.
SUB: Adjusted 3 subtitle(s).
Detected audio codec: [mp3] drv:1 (MPEG layer-2, layer-3)
Selecting Audio Decoder: [mp3lib] MPEG layer-2, layer-3
CPU vendor name: GenuineIntel  max cpuid level: 2
CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Type: 6, Stepping: 6)
Testing OS support for SSE... yes.
Testing OS support for SSE unmasked exceptions... yes.
Tests of OS support for SSE passed.
mp3lib: made decode tables with MMX optimization
init layer2&3 finished, tables done
mp3lib: using MMX optimized decore!
MPEG 1.0, Layer III, 44100 Hz 112 kbit Joint-Stereo, BPF: 365
Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0
AUDIO: srate=44100  chans=2  bps=2  sfmt=0x10  ratio: 14000->176400
No vidix driver name provided, probing available ones!
[genfb] probe
Error occured durint open: No such device
[mach64] Found chip: Rage Mobility P/M AGP 2x
[mach64] Video memory = 8Mb
[mach64] Set write-combining type of video memory
[mach64] Planar YUV formats are supported :)
vosub_vidix: Using: BES driver for Mach64/3DRage cards by Nick Kurshev and 
Michael Niedermayer
==========================================================================
Opening Video Decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec: CPU flags: mmx mmxext sse
Detected video codec: [ffdivx] drv:5 prio:0 (FFmpeg DivX ;-) (MS MPEG-4 v3))
==========================================================================
AO: [sdl] 44100Hz Stereo Signed 16-bit (Little-Endian)
SDL: Samplerate: 44100Hz Channels: Stereo Format Signed 16-bit (Little-Endian)
Start playing...
VDec: vo config request - 640 x 304, Planar YV12
[PP] Sorry, postprocessing is not available
Movie-Aspect is undefined - no prescaling applied.
VO: [xvidix] 640x304 => 640x304 Planar YV12
vo: X11 running at 1024x768 with depth 16 and 16 bits/pixel (":0.0" => local 
display)
[xvidix] image properties: 640x304 depth: 12
vosub_vidix: using 1 buffers


Os linux 2.4.19-pre8




More information about the MPlayer-users mailing list