[MPlayer-users] gui.conf writing problem

[Benoit Servais]

if you do 
ln -s /dev/null gui.conf
 there isn't any problem with the gui anymore..... but it is a weird solution

On Mon, 29 Jul 2002 23:34:25 +0200
WK <sprawki at wp.pl> wrote:

> [Automatic answer: RTFM (read DOCS, FAQ), also read DOCS/bugreports.html]
> I use last cvs version with gui.
> Playlist works ok, but everytime I start mplayer I have to remove gui.conf 
> first cause mplayer writes itselves settings wrong (decimal instead ratio). 
> Output looks that:
> MPlayer CVS-020729-06:00-2.95.4 (C) 2000-2002 Arpad Gereoffy (see DOCS!)
> CPU: Advanced Micro Devices Athlon TB Thunderbird (Family: 6, Stepping: 2)
> CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
> Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx
> Reading config file: 
> /home/gabucino/.mplayer/i_did_not_RTFM_carefully_enough...: No such file or 
> directory
> vo: X11 running at 1280x1024 with depth 24 and 32 bpp (":0.0" => local 
> display)
> Reading /root/.mplayer/codecs.conf: 36 audio & 103 video codecs
> Using Linux's hardware RTC timing (1024Hz)
> Input config file /root/.mplayer/input.conf parsed : 50 binds
> [cfg] read config file: /root/.mplayer/gui.conf
> parameter must be a floating point number or a ratio 
> (numerator[:/]denominator): 0,000000
> /root/.mplayer/gui.conf(4): vo_panscan
> parameter must be a floating point number or a ratio 
> (numerator[:/]denominator): 0,500000
> /root/.mplayer/gui.conf(20): ao_extra_stereo_coefficient
> parameter must be a floating point number or a ratio 
> (numerator[:/]denominator): 0,000000
> /root/.mplayer/gui.conf(21): ao_delay
> parameter must be a floating point number or a ratio 
> (numerator[:/]denominator): 1,010000
> /root/.mplayer/gui.conf(28): font_factor
> parameter must be a floating point number or a ratio 
> (numerator[:/]denominator): 4,000000
> /root/.mplayer/gui.conf(31): equ_band_00
> parameter must be a floating point number or a ratio 
> (numerator[:/]denominator): 1,000000
> /root/.mplayer/gui.conf(32): equ_band_01
> parameter must be a floating point number or a ratio 
> (numerator[:/]denominator): 2,000000
> /root/.mplayer/gui.conf(33): equ_band_02
> parameter must be a floating point number or a ratio 
> (numerator[:/]denominator): 3,000000
> /root/.mplayer/gui.conf(34): equ_band_03
> parameter must be a floating point number or a ratio 
> (numerator[:/]denominator): 4,000000
> /root/.mplayer/gui.conf(35): equ_band_04
> parameter must be a floating point number or a ratio 
> (numerator[:/]denominator): 0,000000
> /root/.mplayer/gui.conf(36): equ_band_05
> parameter must be a floating point number or a ratio 
> (numerator[:/]denominator): 0,000000
> /root/.mplayer/gui.conf(37): equ_band_06
> parameter must be a floating point number or a ratio 
> (numerator[:/]denominator): 0,000000
> /root/.mplayer/gui.conf(38): equ_band_07
> parameter must be a floating point number or a ratio 
> (numerator[:/]denominator): 0,000000
> /root/.mplayer/gui.conf(39): equ_band_08
> parameter must be a floating point number or a ratio 
> (numerator[:/]denominator): 5,000000
> /root/.mplayer/gui.conf(40): equ_band_09
> parameter must be a floating point number or a ratio 
> (numerator[:/]denominator): 5,000000
> /root/.mplayer/gui.conf(41): equ_band_10
> parameter must be a floating point number or a ratio 
> (numerator[:/]denominator): 5,000000
> /root/.mplayer/gui.conf(42): equ_band_11
> too many errors
> [cfg] config file read error ...
> 
> Even when I handly set parameters too integers or ratios, after restart story 
> goes again.:{(
> 
> Is there some way to correct that?
> Thank's in advance and after:)
> Regards
> Wieslaw
> 
> _______________________________________________
> RTFM!!!  http://www.MPlayerHQ.hu/DOCS
> Search:  http://www.MPlayerHQ.hu/cgi-bin/htsearch
> http://mplayerhq.hu/mailman/listinfo/mplayer-users
>