[MPlayer-users] -vo dxr3:avcodec
Erik Waling
doodle at webservices.se
Tue Apr 9 13:40:02 CEST 2002
I don't know if this has to do with MPlayer or libavcodec. I tried both
todays CVS (mplayer and libavcodec) and yesterdays. It works fine with
-vo dxr3:fame, but it crashes when trying to use -vo dxr3:avcodec
I have tried with different codecs (-vc) and i get the same results. It
works with -vo dxr3:fame but not with -vo dxr3:avcodec.
/Erik
------------------------------------------------------
MPlayer CVS-020409-10:20-2.95.4 (C) 2000-2002 Arpad Gereoffy (see DOCS!)
CPU vendor name: GenuineIntel max cpuid level: 2
CPU: Intel Pentium III Katmai/Pentium III Xeon Tanner (Type: 6, Stepping: 3)
Testing OS support for SSE... yes.
Testing OS support for SSE unmasked exceptions... yes.
Tests of OS support for SSE passed.
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled with RUNTIME CPU Detection - warning, it's not optimal! To get best
performance, recompile mplayer from sources with
--disable-runtime-cpudetection
Reading /root/.mplayer/codecs.conf: can't open '/root/.mplayer/codecs.conf':
No such file or directory
Reading /etc/mplayer/codecs.conf: 30 audio & 81 video codecs
CommandLine: '-v' '-ao' 'oss:/dev/em8300_ma-0' '-vo' 'dxr3:avcodec'
'xXx_DivX.avi'
get_path('font/font.desc') -> '/root/.mplayer/font/font.desc'
font: can't open file: /root/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars)
Using Linux's hardware RTC timing (1024Hz)
get_path('input.conf') -> '/root/.mplayer/input.conf'
Can't open input config file /root/.mplayer/input.conf : No such file or
directory
Falling back on default (hardcoded) config
Playing xXx_DivX.avi
Can't open IFO file: No such file or directory
Not an URL!
File size is 10289152 bytes
Detected AVI file format!
list_end=0x2292
======= AVI Header =======
us/frame: 41708 (fps=23.976)
max bytes/sec: 0
padding: 0
MainAVIHeader.dwFlags: (272) HAS_INDEX IS_INTERLEAVED
frames total: 2155 initial: 0
streams: 2
Suggested BufferSize: 0
Size: 512 x 256
list_end=0x10F4
==> Found video stream: 0
======= STREAM Header =======
Type: vids FCC: divx (78766964)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 0
Rate: 2997/125 = 23.976
Start: 0 Len: 2155
Suggested BufferSize: 29613
Quality 10000
Sample size: 0
found 'bih', 40 bytes of 40
======= VIDEO Format ======
biSize 40
biWidth 512
biHeight 256
biPlanes 1
biBitCount 16
biCompression 1482049860='DIVX'
biSizeImage 393216
===========================
Regenerating keyframe table for DIVX 4 video
list_end=0x2186
==> Found audio stream: 1
======= STREAM Header =======
Type: auds FCC: (0)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 1
Rate: 14000/1 = 14000.000
Start: 0 Len: 1258330
Suggested BufferSize: 7000
Quality -1
Sample size: 1
found 'wf', 30 bytes of 20
======= WAVE Format =======
Format Tag: 85 (0x55)
Channels: 2
Samplerate: 44100
avg byte/sec: 14000
Block align: 1
bits/sample: 0
cbSize: 12
list_end=0x2292
Broken chunk? chunksize=1382 (id=JUNK)
list_end=0x9BF11E
Found movie at 0x280C - 0x9BF11E
Reading INDEX block, 4300 chunks for 2155 frames
Broken chunk? chunksize=0 (id=idx1)
Reading INDEX block, 4300 chunks for 2155 frames
AVI index offset: 0x2808 (movi=0x280C idx0=0x4 idx1=0x1B64)
Auto-selected AVI audio ID = 1
Auto-selected AVI video ID = 0
AVI: Searching for audio stream (id:1)
AVI video length=8916832
VIDEO: [DIVX] 512x256 16bpp 23.98 fps 793.6 kbps (96.9 kbyte/s)
[V] filefmt:3 fourcc:0x58564944 size:512x256 fps:23.98 ftime:=0.0417
get_path('sub/') -> '/root/.mplayer/sub/'
Detected audio codec: [mp3] drv:1 (MPEG layer-2, layer-3)
Initializing audio codec...
Selecting Audio Decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer
CPU vendor name: GenuineIntel max cpuid level: 2
CPU: Intel Pentium III Katmai/Pentium III Xeon Tanner (Type: 6, Stepping: 3)
Testing OS support for SSE... yes.
Testing OS support for SSE unmasked exceptions... yes.
Tests of OS support for SSE passed.
mp3lib: made decode tables with MMX optimization
init layer2&3 finished, tables done
mp3lib: using MMX optimized decore!
MPEG 1.0, Layer III, 44100 Hz 112 kbit Joint-Stereo, BPF: 365
Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0
AUDIO: srate=44100 chans=2 bps=2 sfmt=0x10 ratio: 14000->176400
CPU vendor name: GenuineIntel max cpuid level: 2
CPU: Intel Pentium III Katmai/Pentium III Xeon Tanner (Type: 6, Stepping: 3)
Testing OS support for SSE... yes.
Testing OS support for SSE unmasked exceptions... yes.
Tests of OS support for SSE passed.
VO: [dxr3] FAME supported
VO: [dxr3] AVCODEC supported
VO: [dxr3] Opened /dev/em8300_mv-0
libavcodec: CPU flags: mmx mmxext sse
==========================================================================
Opening Video Decoder: [ffmpeg] FFmpeg's libavcodec codec family
INFO: libavcodec init OK!
Detected video codec: [ffodivx] drv:5 prio:0 (FFmpeg MPEG-4)
==========================================================================
AO: [oss] 44100Hz Stereo Signed 16-bit (Little-Endian)
AO: Description: OSS/ioctl audio output
AO: Author: A'rpi
ao2: 44100 Hz 2 chans Signed 16-bit (Little-Endian)
audio_setup: using '/dev/em8300_ma-0' dsp device
audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed
16-bit (Little-Endian))
audio_setup: using 2 channels (requested: 2)
audio_setup: using 44100 Hz samplerate (requested: 44100)
audio_setup: frags: 0/16 (4096 bytes/frag) free: 65536
Start playing...
This file was encoded with DivX500 Build410
hmm, i havnt seen that version of divx yet, lets assume they fixed these
bugs ...
using mpeg4 decoder, if it fails contact the developers (of ffmpeg)
VDec: vo config request - 512 x 256, Planar YV12
Movie-Aspect is undefined - no prescaling applied.
video_out->init(512x256->512x256,flags=0,'MPlayer',0x32315659)
VO: [dxr3] Setting up for PAL/SECAM.
VO: [dxr3] Setting aspect ratio to 16:9
VO: [dxr3] Using AVCODEC
SwScaler: reducing / aligning filtersize 7 -> 8
SwScaler: reducing / aligning filtersize 7 -> 8
SwScaler: reducing / aligning filtersize 4 -> 4
SwScaler: reducing / aligning filtersize 4 -> 4
SwScaler: BICUBIC scaler, from Planar YV12 to Planar YV12 using MMX2
SwScaler: using 8-tap MMX scaler for horizontal luminance scaling
SwScaler: using 8-tap MMX scaler for horizontal chrominance scaling
SwScaler: using n-tap MMX scaler for vertical scaling (YV12 like)
SwScaler: 512x256 -> 352x288
Using MMX2 for colorspace transform
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
XXX initial v_pts=0.000 a_pos=7000 (0.500) / 1 0% 0% 0.0% 0 0 0%
*** [vo] Exporting mp_image_t, 512x256x12bpp YUV planar, 196608 bytes0%
A: 0.0 V: 0.1 A-V: -0.081 ct: -0.008 3/ 3 0% 0% 0.0% 0 0 0%
MPlayer interrupted by signal 11 in module: flip_page
- MPlayer crashed by bad usage of CPU/FPU/RAM. Recompile MPlayer with
--enable-debug and make a 'gdb' backtrace and disassembly. For details, see
DOCS/bugreports.html section 5.b.
- MPlayer crashed. This shouldn't happen. It can be a bug in the MPlayer
code _or_ in your drivers _or_ in your gcc version. If you think it's
MPlayer's fault, please read DOCS/bugreports.html and follow instructions
there. We can't and won't help unless you provide these informations when
reporting a possible bug.
*** free_stream() called ***
VO: [dxr3] Uninitializing
------------------------------------------------------
System information:
Linux alfons 2.4.18 #2 SMP Mon Mar 11 01:44:59 CET 2002 i686 unknown
-rwxr-xr-x 1 root root 1170812 Feb 4 08:03 /lib/libc-2.2.5.so*
XFree86 Version 4.1.0.1 / X Window System
gcc version 2.95.4 (Debian prerelease)
GNU ld version 2.11.92.0.12.3 20011121 Debian/GNU Linux
GNU assembler 2.11.92.0.12.3 20011121 Debian/GNU Linux
alfons:~> cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 498.473
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr sse
bogomips : 992.87
00:0d.0 Multimedia controller: Sigma Designs, Inc. REALmagic Hollywood Plus
DVD Decoder (rev 01)
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at ff000000 (32-bit, non-prefetchable) [size=1M]
------------------------------------------------------
More information about the MPlayer-users
mailing list