From luca at lucarella.com.ar Sun Jul 1 00:01:24 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Sat, 30 Jun 2001 19:01:24 -0300 (ART) Subject: [Mplayer-users] benchmarks In-Reply-To: References: <20010630172120.26220.qmail@web14501.mail.yahoo.com> Message-ID: <200106302313.TAA14756@burns.luca.2y.net> Hi! Today I've downloaded and compiled mplayer from cvs in my Duron 800Mhz/128MB/nVidia TNT-16MB with XFree86 4.0.3. I have some question about the output driver (there so much! I'm kind of lost). I don't know what to use. What it's suposed to be better? I can use: x11 (not too good, I can't get fullscreen) xv (it's ok) opengl (when it works it's REALLY SLOW) sdl (the better for me cause I can change between fullscreen with the 'f'). The sdl output it's aparently using x11 driver: SDL: Using driver: x11 I used the -forcexv but it has no effect for me. The only other driver (for X) I can't use (I think) is dga. I get this message: vo_dga: DGA 2.0 available :-) Can switch resolution AND depth! vo_dga: Selected hardware mode 640 x 480 @ 85 Hz @ depth 24, bitspp 32. vo_dga: Video parameters by codec: 640 x 304, depth 24, bitspp 32. vo_dga: Framebuffer mapping failed!!! Do you know what's wrong? and how can I fix it? OK. I'll be very thanksfull if someone can tell me what's the diferences between drivers (specially sdl, dga, and xv), and witch one is better... Thanks! MPlayer RULEZ! -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From luca at lucarella.com.ar Sun Jul 1 00:01:26 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Sat, 30 Jun 2001 19:01:26 -0300 (ART) Subject: [Mplayer-users] benchmarks In-Reply-To: References: <20010630172120.26220.qmail@web14501.mail.yahoo.com> Message-ID: <200106302313.TAA14760@burns.luca.2y.net> Hi! Today I've downloaded and compiled mplayer from cvs in my Duron 800Mhz/128MB/nVidia TNT-16MB with XFree86 4.0.3. I have some question about the output driver (there so much! I'm kind of lost). I don't know what to use. What it's suposed to be better? I can use: x11 (not too good, I can't get fullscreen) xv (it's ok) opengl (when it works it's REALLY SLOW) sdl (the better for me cause I can change between fullscreen with the 'f'). The sdl output it's aparently using x11 driver: SDL: Using driver: x11 I used the -forcexv but it has no effect for me. The only other driver (for X) I can't use (I think) is dga. I get this message: vo_dga: DGA 2.0 available :-) Can switch resolution AND depth! vo_dga: Selected hardware mode 640 x 480 @ 85 Hz @ depth 24, bitspp 32. vo_dga: Video parameters by codec: 640 x 304, depth 24, bitspp 32. vo_dga: Framebuffer mapping failed!!! Do you know what's wrong? and how can I fix it? OK. I'll be very thanksfull if someone can tell me what's the diferences between drivers (specially sdl, dga, and xv), and witch one is better... Thanks! MPlayer RULEZ! -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From luca at lucarella.com.ar Sun Jul 1 00:01:26 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Sat, 30 Jun 2001 19:01:26 -0300 (ART) Subject: [Mplayer-users] benchmarks In-Reply-To: References: <20010630172120.26220.qmail@web14501.mail.yahoo.com> Message-ID: <200106302313.TAA14764@burns.luca.2y.net> Hi! Today I've downloaded and compiled mplayer from cvs in my Duron 800Mhz/128MB/nVidia TNT-16MB with XFree86 4.0.3. I have some question about the output driver (there so much! I'm kind of lost). I don't know what to use. What it's suposed to be better? I can use: x11 (not too good, I can't get fullscreen) xv (it's ok) opengl (when it works it's REALLY SLOW) sdl (the better for me cause I can change between fullscreen with the 'f'). The sdl output it's aparently using x11 driver: SDL: Using driver: x11 I used the -forcexv but it has no effect for me. The only other driver (for X) I can't use (I think) is dga. I get this message: vo_dga: DGA 2.0 available :-) Can switch resolution AND depth! vo_dga: Selected hardware mode 640 x 480 @ 85 Hz @ depth 24, bitspp 32. vo_dga: Video parameters by codec: 640 x 304, depth 24, bitspp 32. vo_dga: Framebuffer mapping failed!!! Do you know what's wrong? and how can I fix it? OK. I'll be very thanksfull if someone can tell me what's the diferences between drivers (specially sdl, dga, and xv), and witch one is better... Thanks! MPlayer RULEZ! -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Sun Jul 1 00:51:52 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Sun, 1 Jul 2001 00:51:52 +0200 Subject: [Mplayer-users] benchmarks In-Reply-To: <200106302313.TAA14756@burns.luca.2y.net>; from luca@lucarella.com.ar on Sat, Jun 30, 2001 at 07:01:24PM -0300 References: <20010630172120.26220.qmail@web14501.mail.yahoo.com> <200106302313.TAA14756@burns.luca.2y.net> Message-ID: <20010701005152.A14695@woodstock.localdomain> It's the Question that drives us, Leandro Lucarella : > xv (it's ok) That's the best choice (if you don't have Matrox, of coz) > opengl (when it works it's REALLY SLOW) Not recommended. > sdl (the better for me cause I can change between fullscreen with the 'f'). > The sdl output it's aparently using x11 driver: > SDL: Using driver: x11 > I used the -forcexv but it has no effect for me. Is it the same speed as -vo xv ? SDL always writes "x11" , whether using xv or not. I think it's right for you. > The only other driver (for X) I can't use (I think) is dga. I get this message: If xv works, you don't have to use DGA. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From bago at index.hu Sun Jul 1 04:51:53 2001 From: bago at index.hu (Kovacs Bela) Date: Sun, 01 Jul 2001 04:51:53 +0200 Subject: [Mplayer-users] postprocess + fullscreen problems Message-ID: >Heh. >Then go back to windoze and enjoy it... >But please before doing that, just tell us what is 'nice' in m$? >(Bill G's face??? ;-) >What do you think, if we are running m$ DLL files under linux,it >shouldn't make exactly the same image as under windoze???? >(of course with the same settings) >Or you just simply compare -vo sdl:aalib with windoze ddraw >image? =) >(in this case i can understand you... you really should go back >to win then) Sorry if I offended you. I just told my opinion. By the way, I think that m$ drivers use some features of the video card that X can't (yet). It's not your fault. And that doesn't mean I like m$ or windoze. >>I hope it helps. >then RTFM again. and again. and send us _all_ info described >there. (not only gdb) Ok, I read it again. It says: >1. The system info what we always want: >2. Hardware & drivers: All of that was in my first message, I didn't want to repeat myself. >For playback problems: >3. Output of mplayer at verbose level 1 (-v) That is included in the gdb output I uploaded, isn't it? >4. If the problem is specific to one or a few files, > then please upload that file to... I did that. >5. For crashes (segfault, SIGILL, signal 4 etc): >If you have coredump of the crash, see 5.a, else see 5.b: >5.b.: run MPlayer in gdb: >... >Send us the full output of the above things! Uploaded that too. So what am I missing? >Flame off. >IdegCounter*=2 I didn't mean to flame anyone at all. I just wanted to help... Bago _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 1 09:40:43 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 1 Jul 2001 09:40:43 +0200 Subject: [Mplayer-users] Re: Sound, sound, sound In-Reply-To: <01063016341101.01690@localhost.localdomain> References: <200106301406.QAA20890@thot.banki.hu> <01063016264200.01690@localhost.localdomain> <01063016341101.01690@localhost.localdomain> Message-ID: <01070109404304.22906@astral> On Saturday, 30. June 2001 22:34, you wrote: > Am Samstag, 30. Juni 2001 16:26 schrieben Sie: > > Am Samstag, 30. Juni 2001 10:06 schrieben Sie: > > > Hi, > > > > > > > MPlayer 0.17a-IdegCounter (C) 2000-2001 Arpad Gereoffy > > > > > > > > > > ehh. 0.17a is VERY OBSOLETED!!! (and very buggy, too) > > > upgrade now to 0.18pre3 or CVS. > > > > Ok, but I hope all will go well. I'll compile-wait;-) > > No. Now, just like the CVS, it wants a cookie;-)): > > [sascha at localhost MPlayer-0.18pre3]$ ./configure > You can get detailed help on configure with: ./configure --help > Please wait while ./configure discovers your software and hardware > environment! > Checking version of gcc ... 2.96, bad > Please downgrade(upgrade) gcc compiler to gcc-2.95.2+ or gcc-3.0+ version > [sascha at localhost MPlayer-0.18pre3]$ > > That sucks! I know it's known to be buggy but not in Mandrake 8.0 ALL I > compiled with this works quite fine. ALL. Is there a directive in the > configure.in which I can turn off to compile wiht my 2.96? Even --cc > doesn't work:-(( > it should work with --disable-gcc-checking given to configure > Sascha > -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 1 09:47:06 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 1 Jul 2001 09:47:06 +0200 Subject: [Mplayer-users] problems toggling fullscreen mode with SDL In-Reply-To: <20010630150330.18651.qmail@web11003.mail.yahoo.com> References: <20010630150330.18651.qmail@web11003.mail.yahoo.com> Message-ID: <01070109470605.22906@astral> On Saturday, 30. June 2001 17:03, you wrote: > I have a PIII 600Mhz., NVidia TNT2 M64, kernel 2.4.5, > XFree86 4.0.3, SDL 1.1.7, and gcc-2.96 on an Redhat > 7.1 box. With MPlayer 0.18 pre3, whenever I toggle > fullscreen mode with the 'f' key, the video goes > really slow, and the audio stops playing. I am using > fullscreen with SDL because with xv, the fullscreen > mode is coming as a maximised window (KDE 2.1.2). This > problem did not occur with ideg-counter. How can I > work around this? Thans hmm what output driver do you use? Do you have software or hardware scaling (sw scaler is slooow). Maybe SDL isn't using the XVideo extension so try with -forcexv. Aah, hmm you use SDL 1.1.7 maybe it only works with 1.1.8+ never tried that old version, try upgrading SDLlib to v1.2.1. -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 1 09:57:49 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 1 Jul 2001 09:57:49 +0200 Subject: [Mplayer-users] TV-out + SDL In-Reply-To: References: Message-ID: <01070109574907.22906@astral> On Saturday, 30. June 2001 19:29, you wrote: > Hi, > > I've installed the newest NVIDIA driver, which supports tv-out. This only > supports 640x480 and 800x600, and doesn't support xv extension. So the > only way to get fullscreen is -sdl -fs. > > If I use -sdl -fs on my monitor, everything is ok, but on the tv-out it's > very slow, I should use -framedrop. well if you say XVideo isn't mworking with TVout then it's using osftware scaling which is slow, but apparently it's faster with SDLs dga driver so try -vo sdl:dga but you still need powerfull cpu for it. > > Any idea why is it much slower on the tv-out? Is it related to the refresh > rate? Any suggestions? > > Best, > Sala > > PS: > Thx for MPlayer. > -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 1 09:55:15 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 1 Jul 2001 09:55:15 +0200 Subject: [Mplayer-users] benchmarks In-Reply-To: <200106302313.TAA14764@burns.luca.2y.net> References: <20010630172120.26220.qmail@web14501.mail.yahoo.com> <200106302313.TAA14764@burns.luca.2y.net> Message-ID: <01070109551506.22906@astral> On Sunday, 1. July 2001 00:01, you wrote: > Hi! Today I've downloaded and compiled mplayer from cvs in my Duron > 800Mhz/128MB/nVidia TNT-16MB with XFree86 4.0.3. I have some question about > the output driver (there so much! I'm kind of lost). > I don't know what to use. What it's suposed to be better? > I can use: > x11 (not too good, I can't get fullscreen) > xv (it's ok) > opengl (when it works it's REALLY SLOW) > sdl (the better for me cause I can change between fullscreen with the 'f'). > > The sdl output it's aparently using x11 driver: > SDL: Using driver: x11 > it's SDLlibs X11 driver, which uses XVideo if available unless you give -noxv commandlineswitch. > I used the -forcexv but it has no effect for me. It's only for systems where XVideo isn't properly detected. > > The only other driver (for X) I can't use (I think) is dga. I get this > message: > > vo_dga: DGA 2.0 available :-) Can switch resolution AND depth! > vo_dga: Selected hardware mode 640 x 480 @ 85 Hz @ depth 24, bitspp 32. > vo_dga: Video parameters by codec: 640 x 304, depth 24, bitspp 32. > vo_dga: Framebuffer mapping failed!!! hmm, does -vo sdl:dga work? (btw. it's slower then -vo dga, but fastest is XVideo anyway wether you use -vo xv or -vo sdl:x11) > > Do you know what's wrong? and how can I fix it? hmm, maybe Acki knows, did you have root priviledges? > > OK. I'll be very thanksfull if someone can tell me what's the diferences > between drivers (specially sdl, dga, and xv), and witch one is better... > Thanks! it's different ways to access the graphics cards, generally XVideo is fastest followed by dga. > > MPlayer RULEZ! > > -- > LUCA - Leandro Lucarella > ------------------------ > luca at lucarella.com.ar > http://www.luca.2y.net > LICQ UIN: 2847576 > ------------------------ > Usando Debian GNU/Linux > -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From asalamon at elender.hu Sun Jul 1 09:45:23 2001 From: asalamon at elender.hu (Andras Salamon) Date: Sun, 1 Jul 2001 09:45:23 +0200 (CEST) Subject: [Mplayer-users] TV-out + SDL In-Reply-To: Message-ID: On Sat, 30 Jun 2001, Stephen Davies wrote: > On Sat, 30 Jun 2001, Andras Salamon wrote: > > > I've installed the newest NVIDIA driver, which supports tv-out. This only > > supports 640x480 and 800x600, and doesn't support xv extension. So the > > only way to get fullscreen is -sdl -fs. > > > > If I use -sdl -fs on my monitor, everything is ok, but on the tv-out it's > > very slow, I should use -framedrop. > > > > Any idea why is it much slower on the tv-out? Is it related to the refresh > > rate? Any suggestions? > > Hi, > > Are you using the bt869 module from lm_sensors to enable tv out? > No. I'm using NVIDIA's own linux driver. Version 1.0-1251. Sala > I've done a patch for that to do a 720x756 mode that overscans and thus > looks good on a TV. Also might avoid the need to scale for you. > > I've submitted to the maintainers, but in the meantime drop me a line and > I'll send it. > > Steve > > > > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jkol5223 at menza.mff.cuni.cz Sun Jul 1 19:20:47 2001 From: jkol5223 at menza.mff.cuni.cz (Jindrich Kolorenc) Date: Sun, 1 Jul 2001 13:20:47 -0400 (EDT) Subject: [Mplayer-users] problems toggling fullscreen mode with SDL In-Reply-To: <01070109470605.22906@astral> Message-ID: On Sun, 1 Jul 2001, Felix Buenemann wrote: > On Saturday, 30. June 2001 17:03, you wrote: > > I have a PIII 600Mhz., NVidia TNT2 M64, kernel 2.4.5, > > XFree86 4.0.3, SDL 1.1.7, and gcc-2.96 on an Redhat > > 7.1 box. With MPlayer 0.18 pre3, whenever I toggle > > fullscreen mode with the 'f' key, the video goes > > really slow, and the audio stops playing. I am using > > fullscreen with SDL because with xv, the fullscreen > > mode is coming as a maximised window (KDE 2.1.2). This > > problem did not occur with ideg-counter. How can I > > work around this? Thans > hmm what output driver do you use? Do you have software or hardware scaling > (sw scaler is slooow). Maybe SDL isn't using the XVideo extension so try with > -forcexv. > Aah, hmm you use SDL 1.1.7 maybe it only works with 1.1.8+ never tried that > old version, try upgrading SDLlib to v1.2.1. I don't think it is the SDL problem, because I also use 1.1.7-3 on RedHat with 2.2.18 kernel and NVidia TNT2 Vanta. For me -vo sdl uses xv by default. Jindrich Kolorenc. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Sun Jul 1 14:00:34 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Sun, 1 Jul 2001 14:00:34 +0200 (CEST) Subject: [Mplayer-users] fullscreen change with new version? In-Reply-To: <200106301233.OAA35374@thot.banki.hu> Message-ID: > I've found the solution: let's develop the MPlayer Window Manager =) > (of course with animated (divx...) window titles, icons, background etc :)) that's what I'm planning since I launched mplayer with -vo xmga and then some terminals with background colors set to whatever xmga uses for keysth and had awfull terminals with Godzilla running in background and me typing over it. Looks wonderfull, is completely unusable. -- Dariusz Pietrzak Wiem, pozna?em po sp?dnicy _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Sun Jul 1 14:27:16 2001 From: jaf.corporation at gmx.at (JAF) Date: Sun, 1 Jul 2001 14:27:16 +0200 Subject: [Mplayer-users] fullscreen change with new version? References: Message-ID: <000c01c10229$2c15deb0$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* i have the same problem on the konsole, the curser is blinking ... is is possible to stop the curser ??? mfg Johannes ----- Original Message ----- From: "Dariusz Pietrzak" To: Sent: Sunday, July 01, 2001 2:00 PM Subject: Re: Re: [Mplayer-users] fullscreen change with new version? *This message was transferred with a trial version of CommuniGate(tm) Pro* > I've found the solution: let's develop the MPlayer Window Manager =) > (of course with animated (divx...) window titles, icons, background etc :)) that's what I'm planning since I launched mplayer with -vo xmga and then some terminals with background colors set to whatever xmga uses for keysth and had awfull terminals with Godzilla running in background and me typing over it. Looks wonderfull, is completely unusable. -- Dariusz Pietrzak Wiem, pozna?em po sp?dnicy _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From ricci at xrob.org Sun Jul 1 16:49:46 2001 From: ricci at xrob.org (Robert P Ricci) Date: Sun, 1 Jul 2001 08:49:46 -0600 Subject: [Mplayer-users] OSD in 0.18pre3 Message-ID: <20010701084946.A17997@xrob.org> I'm using MPlayer 0.18pre3 on FreeBSD 4.3, and I can't get the OSD to show up. No matter how many times I press 'o', it doesn't come up (but all other keybindings work fine.) When I start mplayer, I get the error message: font: can't open file: /home/ricci/.mplayer/font/font.desc Are tese two related? And where can I find a font.desc file? Also, I noticed that the manpage 'mplayer.1' is not included in the MPlayer-0.18pre.tgz tarball avialable on the website. -- /----------------------------------------------------------- | Robert Ricci - University of Utah CADE Lab Operator | | | "Boredom comes to those who wait" -- The Pietasters \----------------------------------------------------------- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Sun Jul 1 16:57:12 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Sun, 1 Jul 2001 16:57:12 +0200 (CEST) Subject: [Mplayer-users] OSD in 0.18pre3 In-Reply-To: <20010701084946.A17997@xrob.org> Message-ID: > font: can't open file: /home/ricci/.mplayer/font/font.desc > Are tese two related? exactly. > And where can I find a font.desc file? in http://thot.banki.hu/mp-ftp/releases/mp_font3.zip ( or on mplayer.dev.hu ftp/http ). There U'll find also fonts needed for OSD. > Also, I noticed that the manpage 'mplayer.1' is not included in the > MPlayer-0.18pre.tgz tarball avialable on the website. haven't tried the tarball but look in at the DOCS/mplayer.1 You should also try reading DOCS/* that apply to you, font.desc is described in OSD+SUB file. -- Dariusz Pietrzak Wiem, pozna?em po sp?dnicy _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Sun Jul 1 17:41:21 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Sun, 1 Jul 2001 17:41:21 +0200 Subject: [Mplayer-users] OSD in 0.18pre3 In-Reply-To: ; from dariush@ajax.umcs.lublin.pl on Sun, Jul 01, 2001 at 04:57:12PM +0200 References: <20010701084946.A17997@xrob.org> Message-ID: <20010701174121.A3603@woodstock.localdomain> It's the Question that drives us, Dariusz Pietrzak : > > Also, I noticed that the manpage 'mplayer.1' is not included in the > > MPlayer-0.18pre.tgz tarball avialable on the website. > haven't tried the tarball but look in at the DOCS/mplayer.1 It should install when 'make install' is done. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From atmosfear at users.sourceforge.net Sun Jul 1 18:03:01 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 1 Jul 2001 18:03:01 +0200 Subject: [Mplayer-users] fullscreen change with new version? In-Reply-To: <000c01c10229$2c15deb0$6400a8c0@p3> References: <000c01c10229$2c15deb0$6400a8c0@p3> Message-ID: <01070118030109.22906@astral> On Sunday, 1. July 2001 14:27, you wrote: > *This message was transferred with a trial version of CommuniGate(tm) Pro* > i have the same problem on the konsole, the curser is blinking ... > > is is possible to stop the curser ??? Yes, add noblink to the parameters for the matroxfb module in your lilo conf (it should then look somewhat like append "video=matrox:noblink,option2:value,option3" (for me it is video=matrox:vesa:194,noblink,fh:95kHz,fv:100Hz") For more info RTFM /usr/src/linux/Documentation/fb/matroxfb.txt and you should also use mplayer >/dev/null to redirect text output to nirwana. > > mfg Johannes > ----- Original Message ----- > From: "Dariusz Pietrzak" > To: > Sent: Sunday, July 01, 2001 2:00 PM > Subject: Re: Re: [Mplayer-users] fullscreen change with new version? > > > *This message was transferred with a trial version of CommuniGate(tm) Pro* > > > I've found the solution: let's develop the MPlayer Window Manager =) > > (of course with animated (divx...) window titles, icons, background etc > > > :)) > > that's what I'm planning since I launched mplayer with -vo xmga and then > some terminals with background colors set to whatever xmga uses for > keysth and had awfull terminals with Godzilla running in background and me > typing over it. > Looks wonderfull, is completely unusable. > > -- > Dariusz Pietrzak > Wiem, pozna?em po sp?dnicy > > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > > > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From ricci at xrob.org Sun Jul 1 21:38:02 2001 From: ricci at xrob.org (Robert P Ricci) Date: Sun, 1 Jul 2001 13:38:02 -0600 Subject: [Mplayer-users] OSD in 0.18pre3 In-Reply-To: ; from dariush@ajax.umcs.lublin.pl on Sun, Jul 01, 2001 at 04:57:12PM +0200 References: <20010701084946.A17997@xrob.org> Message-ID: <20010701133802.B36060@xrob.org> Thus spake Dariusz Pietrzak on Sun, Jul 01, 2001 at 04:57:12PM +0200: > > > font: can't open file: /home/ricci/.mplayer/font/font.desc > > Are tese two related? > exactly. > > > And where can I find a font.desc file? > in http://thot.banki.hu/mp-ftp/releases/mp_font3.zip > ( or on mplayer.dev.hu ftp/http ). > There U'll find also fonts needed for OSD. Thanks, the OSD works great for me now. -- /----------------------------------------------------------- | Robert Ricci - University of Utah CADE Lab Operator | | | "Boredom comes to those who wait" -- The Pietasters \----------------------------------------------------------- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From ricci at xrob.org Sun Jul 1 21:30:24 2001 From: ricci at xrob.org (Robert P Ricci) Date: Sun, 1 Jul 2001 13:30:24 -0600 Subject: [Mplayer-users] OSD in 0.18pre3 In-Reply-To: <20010701174121.A3603@woodstock.localdomain>; from gabucino@k2.jozsef.kando.hu on Sun, Jul 01, 2001 at 05:41:21PM +0200 References: <20010701084946.A17997@xrob.org> <20010701174121.A3603@woodstock.localdomain> Message-ID: <20010701133024.A36060@xrob.org> Thus spake Gabucino on Sun, Jul 01, 2001 at 05:41:21PM +0200: > It should install when 'make install' is done. Yeah, but it's not even in the tarball at all, so it can't get installed. :) -------------------------------------------------- hactar:~/MPlayer-0.18pre3> sudo gmake install install -D -m 755 -s mplayer /usr/local/bin/mplayer install -D -m 644 DOCS/mplayer.1 /usr/local/man/man1/mplayer.1 install: DOCS/mplayer.1: No such file or directory gmake: *** [install] Error 71 hactar:~/MPlayer-0.18pre3> -------------------------------------------------- -- /----------------------------------------------------------- | Robert Ricci - University of Utah CADE Lab Operator | | | "Boredom comes to those who wait" -- The Pietasters \----------------------------------------------------------- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 1 22:02:52 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 1 Jul 2001 22:02:52 +0200 (CEST) Subject: [Mplayer-users] OSD in 0.18pre3 In-Reply-To: <20010701133024.A36060@xrob.org> Message-ID: <200107012002.WAA11748@thot.banki.hu> Hi, > Thus spake Gabucino on Sun, Jul 01, 2001 at 05:41:21PM +0200: > > It should install when 'make install' is done. > > Yeah, but it's not even in the tarball at all, so it can't get > installed. :) arpi at mplayerhq:/home/ftp/MPlayer/releases$ tar tzf MPlayer-0.18pre3.tgz |grep mplayer.1 MPlayer-0.18pre3/DOCS/mplayer.1 it is there. maybe your copy of the .tgz file is broken... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Sun Jul 1 21:58:17 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Sun, 1 Jul 2001 21:58:17 +0200 Subject: [Mplayer-users] OSD in 0.18pre3 In-Reply-To: <20010701133024.A36060@xrob.org>; from ricci@xrob.org on Sun, Jul 01, 2001 at 01:30:24PM -0600 References: <20010701084946.A17997@xrob.org> <20010701174121.A3603@woodstock.localdomain> <20010701133024.A36060@xrob.org> Message-ID: <20010701215817.A4398@woodstock.localdomain> It's the Question that drives us, Robert P Ricci : > Yeah, but it's not even in the tarball at all, so it can't get > installed. :) Ehh. Arpi? -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From gabucino at k2.jozsef.kando.hu Sun Jul 1 22:16:29 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Sun, 1 Jul 2001 22:16:29 +0200 Subject: [Mplayer-users] OSD in 0.18pre3 In-Reply-To: <20010701215817.A4398@woodstock.localdomain>; from gabucino@k2.jozsef.kando.hu on Sun, Jul 01, 2001 at 09:58:17PM +0200 References: <20010701084946.A17997@xrob.org> <20010701174121.A3603@woodstock.localdomain> <20010701133024.A36060@xrob.org> <20010701215817.A4398@woodstock.localdomain> Message-ID: <20010701221629.A4477@woodstock.localdomain> It's the Question that drives us, Gabucino : > > Yeah, but it's not even in the tarball at all, so it can't get > > installed. :) > Ehh. Arpi? Hmm, it's there. It's your fault then.. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From arpi at thot.banki.hu Sun Jul 1 22:26:04 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 1 Jul 2001 22:26:04 +0200 (CEST) Subject: [Mplayer-users] postprocess + fullscreen problems In-Reply-To: Message-ID: <200107012026.WAA10602@thot.banki.hu> Hi, > >Heh. > >Then go back to windoze and enjoy it... > >But please before doing that, just tell us what is 'nice' in m$? > >(Bill G's face??? ;-) > >What do you think, if we are running m$ DLL files under linux,it > >shouldn't make exactly the same image as under windoze???? > >(of course with the same settings) > >Or you just simply compare -vo sdl:aalib with windoze ddraw >image? =) > >(in this case i can understand you... you really should go back >to win then) > Sorry if I offended you. I just told my opinion. By the way, I think that m$ > drivers use some features of the video card that X can't (yet). It's not your Yes, it is possible. Just realized that you have S3 card... you really should replace it with any Matrox or ATI card if you plan using linux for multimedia purposes. > fault. And that doesn't mean I like m$ or windoze. Who likes... > >>I hope it helps. > >then RTFM again. and again. and send us _all_ info described >there. (not only gdb) > >3. Output of mplayer at verbose level 1 (-v) > That is included in the gdb output I uploaded, isn't it? ok, then sorry. i haven't checked the gdb log file. (as i need mpalyer output here, gdb isn't usefull now) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 1 22:15:07 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 1 Jul 2001 22:15:07 +0200 (CEST) Subject: [Mplayer-users] OSD in 0.18pre3 In-Reply-To: <20010701215817.A4398@woodstock.localdomain> Message-ID: <200107012015.WAA10686@thot.banki.hu> Hi, > It's the Question that drives us, Robert P Ricci : > > Yeah, but it's not even in the tarball at all, so it can't get > > installed. :) > Ehh. Arpi? What ehh hey? (we should close this thread now) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From tom at playford.net Sun Jul 1 23:52:40 2001 From: tom at playford.net (Tom Playford) Date: Sun, 1 Jul 2001 22:52:40 +0100 Subject: [Mplayer-users] lirc Message-ID: <20010701225240.A907@tom.albera> Hi, I've heard that mplayer accepts commands from lircd (ir remote control system) (www.lirc.org) but I can't find any documentation on it. Can anyone help? Tom Playford -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From arpi at thot.banki.hu Mon Jul 2 00:24:37 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 2 Jul 2001 00:24:37 +0200 (CEST) Subject: [Mplayer-users] lirc In-Reply-To: <20010701225240.A907@tom.albera> Message-ID: <200107012224.AAA18962@thot.banki.hu> Hi, > Hi, > > I've heard that mplayer accepts commands from lircd (ir remote control system) > (www.lirc.org) but I can't find any documentation on it. > > Can anyone help? RTFM DOCS/LIRC A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dougalkennedy at yahoo.com.au Mon Jul 2 09:56:12 2001 From: dougalkennedy at yahoo.com.au (=?iso-8859-1?q?dougal=20kennedy?=) Date: Mon, 2 Jul 2001 17:56:12 +1000 (EST) Subject: [Mplayer-users] i got a problem Message-ID: <20010702075612.24512.qmail@web12702.mail.yahoo.com> Hi, my name is dougal and i am using mplayer for part of a computer controlled multimedia display system (detailed system info at the end). I am using the mplayer program to assist in displaying videos (due to its excellent cpu usage among other things). As such i sometimes require mplayer to play more than one video at once. However, when it tries to do this, i get the OSD on both screens flickering. I am using the xv drivers, and tried increasing the number of buffers used up to 2 then upto 8 (in vo_xv.c as advised in the FAQ page) to no avail. Some interesting things i have noticed about this problem are: *if one mplayer is started, and hidden from view (eg behind another unrelated window) and then the second one is started, then the second one will play normally until the first one is brought into view again. This leads me to believe there is some kind of shared buffer problem. However, my c and c++ is very weak (i am doing my thingy mainly in java) and was wondering if anyone else had this problem and whether they have any ideas on how i could fix it?? Thanking you in advance. Dougal Kennedy ps i also have an intermitent problem, which i could not repeat with your tests to give you output files, however it basically goes something like this: the file will finish and mplayer will appear to exit normally like so: [dkennedy at rowlf dkennedy]$ mplayer devel/res/LegoRacers.mpg MPlayer 0.17a-IdegCounter (C) 2000-2001 Arpad Gereoffy Reading config file: /etc/mplayer.conf: No such file or directory Reading config file: /home/dkennedy/.mplayer/config Reading /home/dkennedy/.mplayer/codecs.conf: 15 audio & 26 video codecs font: can't open file: /home/dkennedy/.mplayer/font/font.desc ==> Found video stream: 0 Detected MPEG-PS file format! ==> Found audio stream: 0 mpeg2dec-0.2.0-release (C) 2000-2001 Aaron Holtzman & Michel Lespinasse Using MMX for IDCT transform Using MMX for motion compensation VIDEO: MPEG1 320x240 (aspect 1) 30.00 fps 1198.5 kbps (149.8 kbyte/s) [V] filefmt:2 fourcc:0x1 size:320x240 fps:30.00 ftime:=0.0333 Found audio codec: [mp3] drv:1 (MPEG layer-2, layer-3) mp3lib: Processor ID: 665 mp3lib: i586 processor detected. AUDIO: samplerate=44100 channels=2 bps=2 Found video codec: [mpeg12] drv:1 (MPEG 1 or 2) VO: [xv] 320x240 => 320x240 YV12 Got the display :0 and num_buf=2 Xvideo image format: 0x32595559 (YUY2) packed Xvideo image format: 0x32315659 (YV12) planar Xvideo image format: 0x30323449 (I420) planar Xvideo image format: 0x59565955 (UYVY) packed using Xvideo port 42 for hw scaling [xv] dcx: 0 dcy: 0 dx: 0 dy: 0 dw: 320 dh: 240 Audio buffer size: 0 bytes, delay: 0.000s Start playing... [xv] dcx: 0 dcy: 0 dx: 0 dy: 0 dw: 320 dh: 240 A: 49.6 V: 49.6 A-V: 0.014 ct: -0.011 1481 11% 0% 1.7% Exiting... (End of file) However, it never returns to the command line prompt, and when i do a ps axf on it, i get told mplayer is an RW process (ie it is on the run que,but has no resident pages). I have stopped this problem with the very dodgy method of doing a kill(getpid(),SIGKILL); every time when it exits (i told you my c knowledge is fairly sketchy, and it was the best i could do), but i am sure there is a better solution. pps here is the info that u will need (hopefully it is all there) What? ===== 1. The system info what we always want: - linux distribution RedHat 7.1 - kernel version: Linux 2.4.2-2 i686 - libc version: -rwxr-xr-x 2 root root 1236396 Apr 7 07:58 /lib/libc-2.2.2.so lrwxrwxrwx 1 root root 13 Jun 7 23:36 /lib/libc.so.6 -> libc-2.2.2.so - X version: XFree86 Version 4.0.3 / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 16 March 2001 - gcc and ld version: gcc -v = Thread model: single gcc version 3.0 ld -v = GNU ld version 2.10.91 (with BFD 2.10.91.0.2) - binutils version: GNU assembler 2.10.91 2. Hardware & drivers: - CPU info: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 6 model name : Celeron (Mendocino) stepping : 5 cpu MHz : 467.739 cache size : 128 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr bogomips : 933.88 - video card manufacturer and model examples: nVidia TNT2 Ultra pro 32MB SDRAM (i think?) - video driver type&version examples: X built-in driver (i think?) - sound card type & driver AC97 codec soundcard with 4Kb buffer (built into the mother board). - lspci -v was not a known comman on my system The output from the first player will be in mplayer1.log and from the second player (which was started second as u may guess) in mplayer2.log _____________________________________________________________________________ http://messenger.yahoo.com.au - Yahoo! Messenger - Voice chat, mail alerts, stock quotes and favourite news and lots more! -------------- next part -------------- A non-text attachment was scrubbed... Name: mplayer1.log Type: application/x-unknown Size: 13878 bytes Desc: mplayer1.log URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: mplayer2.log Type: application/x-unknown Size: 11583 bytes Desc: mplayer2.log URL: From steve at daviesfam.org Mon Jul 2 10:20:42 2001 From: steve at daviesfam.org (Stephen Davies) Date: Mon, 2 Jul 2001 09:20:42 +0100 (BST) Subject: [Mplayer-users] postprocess + fullscreen problems In-Reply-To: <200107012026.WAA10602@thot.banki.hu> Message-ID: On Sun, 1 Jul 2001, Arpi wrote: > Yes, it is possible. Just realized that you have S3 card... you really > should replace it with any Matrox or ATI card if you plan using linux for > multimedia purposes. There's no available Matrox card with Linux supported TV-out, right? Steve _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Mon Jul 2 10:33:05 2001 From: jaf.corporation at gmx.at (JAF) Date: Mon, 02 Jul 2001 10:33:05 +0200 Subject: [Mplayer-users] postprocess + fullscreen problems In-Reply-To: Message-ID: > There's no available Matrox card with Linux supported > TV-out, right? > > Steve well ... you can use a Dualhead-card and the second head for tv-out (like i) mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 2 10:33:31 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 2 Jul 2001 10:33:31 +0200 (CEST) Subject: [Mplayer-users] i got a problem In-Reply-To: <20010702075612.24512.qmail@web12702.mail.yahoo.com> Message-ID: <200107020833.KAA14428@thot.banki.hu> Hi, > i get the OSD on both screens flickering. I am using > the xv drivers, and tried increasing the number of > buffers used up to 2 then upto 8 (in vo_xv.c as > advised in the FAQ page) to no avail. Some interesting > things i have noticed about this problem are: > *if one mplayer is started, and hidden from view (eg > behind another unrelated window) and then the second > one is started, then the second one will play normally > until the first one is brought into view again. This > leads me to believe there is some kind of shared > buffer problem. However, my c and c++ is very weak (i yes. AFAIK currently no PC video card available (at least with Xv drivers, I don't know about professional cards) which can do multiple overlays at the same time. so you can't do it, it's a hardware limitation! one window will work, multiple won't. you should try -vo x11 or gl instead of xv > MPlayer 0.17a-IdegCounter (C) 2000-2001 Arpad you shouldn't use 0.17a... it's very old & buggy. try 0.18pre3 > and when i do a ps axf on it, i get told mplayer is an > RW process (ie it is on the run que,but has no > resident pages). I have stopped this problem with the > very dodgy method of doing a i think it's problem with your audio card driver. try 0.18pre... > XFree86 Version 4.0.3 / X Window System > nVidia TNT2 Ultra pro 32MB SDRAM (i think?) > X built-in driver (i think?) impossible. 4.0.3 has no built-in Xv driver for nvidia cards. > - sound card type & driver > AC97 codec soundcard with 4Kb buffer (built into the > mother board). OSS or ALSA driver? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 2 10:34:57 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 2 Jul 2001 10:34:57 +0200 (CEST) Subject: [Mplayer-users] postprocess + fullscreen problems In-Reply-To: Message-ID: <200107020834.KAA14488@thot.banki.hu> Hi, > > > Yes, it is possible. Just realized that you have S3 card... you really > > should replace it with any Matrox or ATI card if you plan using linux for > > multimedia purposes. > > There's no available Matrox card with Linux supported TV-out, right? > G400 is supported, but it's hard to find place where you can buy it. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Mon Jul 2 11:44:38 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Mon, 2 Jul 2001 11:44:38 +0200 (CEST) Subject: [Mplayer-users] lirc In-Reply-To: <200107012224.AAA18962@thot.banki.hu> Message-ID: > RTFM DOCS/LIRC maybe we'll set-up mailbot that answers those kind of questions? oh well, arpi makes good work as a bot. let's leave it that way. -- Dariusz Pietrzak Wiem, pozna?em po sp?dnicy _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Mon Jul 2 12:04:22 2001 From: jaf.corporation at gmx.at (JAF) Date: Mon, 02 Jul 2001 12:04:22 +0200 Subject: [Mplayer-users] postprocess + fullscreen problems In-Reply-To: <200107020834.KAA14488@thot.banki.hu> Message-ID: > > There's no available Matrox card with Linux supported > TV-out, right? > > > G400 is supported, but it's hard to find place where you > can buy it. look at www.ebay.de or www.ebay.com ;-) mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From steve at daviesfam.org Mon Jul 2 12:16:42 2001 From: steve at daviesfam.org (Stephen Davies) Date: Mon, 2 Jul 2001 11:16:42 +0100 (BST) Subject: [Mplayer-users] postprocess + fullscreen problems In-Reply-To: Message-ID: On Mon, 2 Jul 2001, JAF wrote: > > There's no available Matrox card with Linux supported > > TV-out, right? > > > > Steve > well ... you can use a Dualhead-card and the second head for > tv-out (like i) Only supported on the G400, which I have found impossible to buy. Steve _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Mon Jul 2 12:06:14 2001 From: jaf.corporation at gmx.at (JAF) Date: Mon, 02 Jul 2001 12:06:14 +0200 Subject: [Mplayer-users] Howtos In-Reply-To: Message-ID: Hi ... is there already anybody who is writing German Docs ? if not, please tell me, I would do ... mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Mon Jul 2 12:15:02 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Mon, 2 Jul 2001 12:15:02 +0200 (CEST) Subject: [Mplayer-users] Howtos In-Reply-To: Message-ID: > Hi ... is there already anybody who is writing German Docs ? never heard, go to it. most work on DOCS is on Spanish right now. -- Dariusz Pietrzak Zeniu! widze Cie katem oka! _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Mon Jul 2 14:38:49 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Mon, 2 Jul 2001 14:38:49 +0200 Subject: [Mplayer-users] Howtos In-Reply-To: References: Message-ID: <01070214384901.00683@astral> On Monday, 2. July 2001 12:06, you wrote: > Hi ... is there already anybody who is writing German Docs ? > > if not, please tell me, I would do ... Grab you a CVS copy and do it, you can send files then to me so I can add them to CVS. (anonymous cvs is available via pserver from mp.dev.hu cvsroot should be /cvsroot/mplayer but think this info is on the mplayer homepage, too) > > mfg Johannes > -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Mon Jul 2 14:54:17 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Mon, 2 Jul 2001 14:54:17 +0200 Subject: [Mplayer-users] i got a problem In-Reply-To: <200107020833.KAA14428@thot.banki.hu> References: <200107020833.KAA14428@thot.banki.hu> Message-ID: <01070214541702.00683@astral> On Monday, 2. July 2001 10:33, you wrote: > Hi, > > > i get the OSD on both screens flickering. I am using > > the xv drivers, and tried increasing the number of > > buffers used up to 2 then upto 8 (in vo_xv.c as > > advised in the FAQ page) to no avail. Some interesting > > things i have noticed about this problem are: > > *if one mplayer is started, and hidden from view (eg > > behind another unrelated window) and then the second > > one is started, then the second one will play normally > > until the first one is brought into view again. This > > leads me to believe there is some kind of shared > > buffer problem. However, my c and c++ is very weak (i > > yes. AFAIK currently no PC video card available (at least > with Xv drivers, I don't know about professional cards) > which can do multiple overlays at the same time. hmm whats then with NVidia cards + Nvidia Drivers and the grab port xv stuff in current cvs or 0.18pre? > > so you can't do it, it's a hardware limitation! > one window will work, multiple won't. > you should try -vo x11 or gl instead of xv > > > MPlayer 0.17a-IdegCounter (C) 2000-2001 Arpad > > you shouldn't use 0.17a... it's very old & buggy. > try 0.18pre3 > > > and when i do a ps axf on it, i get told mplayer is an > > RW process (ie it is on the run que,but has no > > resident pages). I have stopped this problem with the > > very dodgy method of doing a > > i think it's problem with your audio card driver. > try 0.18pre... > > > XFree86 Version 4.0.3 / X Window System > > nVidia TNT2 Ultra pro 32MB SDRAM (i think?) > > X built-in driver (i think?) hmm, think only nvidias binary drivers can do xvideo, so I guess you have those (but maybe XF 4.0.3 builtin can do it, only checked with 4.0.2) > > impossible. 4.0.3 has no built-in Xv driver for nvidia cards. > > > - sound card type & driver > > AC97 codec soundcard with 4Kb buffer (built into the > > mother board). > > OSS or ALSA driver? > > > A'rpi / Astral & ESP-team > > -- > mailto:arpi at thot.banki.hu > http://esp-team.scene.hu > -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 2 15:09:54 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 2 Jul 2001 15:09:54 +0200 (CEST) Subject: [Mplayer-users] Request for added hardware support !?! In-Reply-To: <20010613055037.A1556@Notebook> Message-ID: <200107021309.PAA47356@thot.banki.hu> Hi, > > > I would like to ask, whether the following components could be > > > supported in the future by mplayer: > > > > > > Siemens DVB-satellite card (hardware MPEG2-Decoder) > > > DeviceDriver http://linuxtv.org/dvb > > > VDR Project http://www.cadsoft.de/people/kls/vdr/index.htm > > > DVDPlayer http://www2.arnes.si/~mthale1/index.html I've read specs of card, and also looked at the libdvb drivers. it's possible to make MPlayer to be able playing mpeg2 (and maybe divx too, using ffmpeg's transcoder) on this card. What else functionality do you want/need? Recording to mpeg2 or divx from satellite, etc... :) (i'm personally interested in this) > > > Soundcards with CMedia CMI 8783 soundchip > > > > > > DeviceDriver: http://www.cmedia.com.tw Linux kernel 2.4.x has driver for this chip, at least the basic functionality. 4 speaker mode is possible, only need some driver changes. SPDIF i/o is problematic, i have no idea (and no SPDIF-compatible speakers) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From artur.zaprzala at talex.com.pl Mon Jul 2 15:26:00 2001 From: artur.zaprzala at talex.com.pl (Artur Zaprzala) Date: Mon, 02 Jul 2001 15:26:00 +0200 Subject: [Mplayer-users] Internationalized font renderer for mplayer. Message-ID: <3B407668.E3E3C836@talex.com.pl> Hi, I like mplayer very much, and so I like freetype project. I have just uploaded the result of it: ftp://thot.banki.hu/MPlayer/incoming/subfont-1.0a.tar.bz2 It takes TrueType or Type1 font and your encoding (of 8 bit charset) as input, and creates *.raw bitmap and alpha files and font.desc. My platform is RedHat 7.1, if you have portability problems, use the source! Artur Zaprzala _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Mon Jul 2 15:42:08 2001 From: jaf.corporation at gmx.at (JAF) Date: Mon, 02 Jul 2001 15:42:08 +0200 Subject: [Mplayer-users] Howtos In-Reply-To: <01070214384901.00683@astral> Message-ID: > Grab you a CVS copy and do it, you can send files then to > me so I can add > them to CVS. (anonymous cvs is available via pserver from > mp.dev.hu cvsroot > should be /cvsroot/mplayer but think this info is on the > mplayer homepage, > too) well ok ... i will do ... i will need some days for this (i will to in my work ;-) when anybody is asking for german language, tell them, somebody is already writing ... mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Mon Jul 2 15:38:46 2001 From: jaf.corporation at gmx.at (JAF) Date: Mon, 02 Jul 2001 15:38:46 +0200 Subject: [Mplayer-users] Request for added hardware support !?! In-Reply-To: <200107021309.PAA47356@thot.banki.hu> Message-ID: > > > > Siemens DVB-satellite card (hardware MPEG2-Decoder) > I've read specs of card, and also looked at the libdvb > drivers. > it's possible to make MPlayer to be able playing mpeg2 > (and maybe > divx too, using ffmpeg's transcoder) on this card. > What else functionality do you want/need? Recording to > mpeg2 or divx Hi ... i think the most important is DIVX-Player, also maybe recording ... but i think playing is more important as is told you, a producer of such card would lend you such a card. maybe they would give you the card for ever ... i will ask them again ... stand by .. (sorry for my english) mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 2 17:17:39 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 2 Jul 2001 17:17:39 +0200 (CEST) Subject: [Mplayer-users] Internationalized font renderer for mplayer. In-Reply-To: <3B407668.E3E3C836@talex.com.pl> Message-ID: <200107021517.RAA45906@thot.banki.hu> Hi, > I like mplayer very much, and so I like freetype project. I have just uploaded the result > of it: > ftp://thot.banki.hu/MPlayer/incoming/subfont-1.0a.tar.bz2 > > It takes TrueType or Type1 font and your encoding (of 8 bit charset) as input, and creates > *.raw bitmap and alpha files and font.desc. > Very nice work! Just checked your example font, and looks wonderful! Only 2 notes: 1. alpha should be much darker (to look better on white background) 2. you should align starting x position of each char to multiple of 8 (required for under-development MMX renderer) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From sugata at knumi.com Mon Jul 2 17:36:41 2001 From: sugata at knumi.com (Sugata Mukhopadhyay) Date: Mon, 2 Jul 2001 11:36:41 -0400 Subject: [Mplayer-users] dxr3? Message-ID: <20010702113641.A22146@knumi.com> Hello everyone! Is there any support for the Sigma designs H+/Creative DXr3 mpeg decoder cards in mplayer? The only player mentioned at dxr3.sourceforge.net is xine, but I want a player that doesn't need X for an embedded appication Thanks Sugata PS - Mplayer 0.18pre rocks! -- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 2 17:57:26 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 2 Jul 2001 17:57:26 +0200 (CEST) Subject: [Mplayer-users] dxr3? In-Reply-To: <20010702113641.A22146@knumi.com> Message-ID: <200107021557.RAA14004@thot.banki.hu> Hi, > Is there any support for the Sigma designs H+/Creative DXr3 > mpeg decoder cards in mplayer? The only player mentioned at > dxr3.sourceforge.net is xine, but I want a player that doesn't > need X for an embedded appication currently no support for hardware decoders because of lack of such hardware. if you denotes us some cards, we can develop driver/support for it. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From asalamon at elender.hu Mon Jul 2 19:06:01 2001 From: asalamon at elender.hu (Andras Salamon) Date: Mon, 2 Jul 2001 19:06:01 +0200 (CEST) Subject: [Mplayer-users] TV-out + SDL In-Reply-To: <01070109574907.22906@astral> Message-ID: On Sun, 1 Jul 2001, Felix Buenemann wrote: > On Saturday, 30. June 2001 19:29, you wrote: > > Hi, > > > > I've installed the newest NVIDIA driver, which supports tv-out. This only > > supports 640x480 and 800x600, and doesn't support xv extension. So the > > only way to get fullscreen is -sdl -fs. > > > > If I use -sdl -fs on my monitor, everything is ok, but on the tv-out it's > > very slow, I should use -framedrop. > well if you say XVideo isn't mworking with TVout then it's using osftware > scaling which is slow, but apparently it's faster with SDLs dga driver so try > -vo sdl:dga but you still need powerfull cpu for it. Thx for the tip. It's faster. Unfortunately it's till slow a little bit. Sala _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From artur.zaprzala at talex.com.pl Mon Jul 2 21:33:39 2001 From: artur.zaprzala at talex.com.pl (Artur Zaprzala) Date: Mon, 02 Jul 2001 21:33:39 +0200 Subject: [Mplayer-users] Internationalized font renderer for mplayer. References: <200107021517.RAA45906@thot.banki.hu> Message-ID: <3B40CC93.A5D727CB@talex.com.pl> Arpi wrote: > > Hi, > > > I like mplayer very much, and so I like freetype project. I have just uploaded the result > > of it: > > ftp://thot.banki.hu/MPlayer/incoming/subfont-1.0a.tar.bz2 > > > > It takes TrueType or Type1 font and your encoding (of 8 bit charset) as input, and creates > > *.raw bitmap and alpha files and font.desc. > > > > Very nice work! Just checked your example font, and looks wonderful! > > Only 2 notes: > 1. alpha should be much darker (to look better on white background) > 2. you should align starting x position of each char to multiple of 8 > (required for under-development MMX renderer) > > A'rpi / Astral & ESP-team I'm just uploading new version addressing noted issues (and fixing some bugs): ftp://thot.banki.hu/MPlayer/incoming/subfont-1.0a1.tar.bz2 Artur Zaprzala _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 2 21:43:21 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 2 Jul 2001 21:43:21 +0200 (CEST) Subject: [Mplayer-users] Internationalized font renderer for mplayer. In-Reply-To: <3B40CC93.A5D727CB@talex.com.pl> Message-ID: <200107021943.VAA24812@thot.banki.hu> Hi, > > Only 2 notes: > > 1. alpha should be much darker (to look better on white background) later i saw that you have option for this. note: mplayer has -ffactor option to change alpha darkness at runtime, so font files should use max resolution (256 gray levels) for alphamap. > > 2. you should align starting x position of each char to multiple of 8 > > (required for under-development MMX renderer) > > > > A'rpi / Astral & ESP-team > > I'm just uploading new version addressing noted issues (and fixing some bugs): > ftp://thot.banki.hu/MPlayer/incoming/subfont-1.0a1.tar.bz2 > ok, i'll check. btw i had problem with compilation: WARNING() and ERROR() macros failed when called with just one parameter. i'm using gcc 2.95.2. (maybe it' sok with 2.96 or 3.0) maybe defining inline functions for these is more cleaner (and portable) than using #define. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 2 22:45:21 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 2 Jul 2001 22:45:21 +0200 (CEST) Subject: [Mplayer-users] Internationalized font renderer for mplayer. In-Reply-To: <200107021943.VAA24812@thot.banki.hu> Message-ID: <200107022045.WAA17582@thot.banki.hu> Hi, > btw i had problem with compilation: WARNING() and ERROR() macros failed > when called with just one parameter. i'm using gcc 2.95.2. > (maybe it' sok with 2.96 or 3.0) finally got it compiled, but not working. gcc 2.1.3 doesn't support ucs-4le encoding, but supports ucs-4 which is the same as ucs-4be. so i've changed ucs-4le to ucs-4, and added small routine to change byte order at the end of 8bit->unicode conversion: /* converting unicodes BE -> LE */ for (i = 0; i<256; ++i){ FT_ULong x=ustring[i]; x= ((x>>24)&255) | (((x>>16)&255)<<8) | (((x>> 8)&255)<<16) | ((x&255)<<24); ustring[i]=x; } Now it works well for me. Another thing I'll do is implementing 'edge growing' filter before doing gaussian blur. i mean enlarging chars by 1 pixel (adding 1 pixel width outline). A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Mon Jul 2 23:35:07 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Mon, 2 Jul 2001 23:35:07 +0200 Subject: [Mplayer-users] Howtos In-Reply-To: ; from jaf.corporation@gmx.at on Mon, Jul 02, 2001 at 03:42:08PM +0200 References: <01070214384901.00683@astral> Message-ID: <20010702233507.A1851@woodstock.localdomain> It's the Question that drives us, JAF : > when anybody is asking for german language, tell them, > somebody is already writing ... Just don't forget to maintain it. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From nickols_k at mail.ru Tue Jul 3 14:00:17 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Tue, 03 Jul 2001 12:00:17 +0000 (:) Subject: [Mplayer-users] LATEST NEWS of mplayer Message-ID: Hello! I just read the latest news of mplayer at mp.dev.hu There is news at 2001.06.30: "MPlayer got an ICCCM patch.. This is some standard for communication between programs and window managers (or so). Unfortunately some windowmanager is always broken :(( First it was icewm, then WindowMaker, and now it's KDE. I (we) don't like KDE so I'm pleased :)" Could someone explain me what are problems with WindowMaker? I use latest - 0.65 (with Hermes library support) and never meet any problem. What should I do to determine them? Best regards! Nick _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From as at sci.fi Tue Jul 3 10:17:18 2001 From: as at sci.fi (Anssi Saari) Date: Tue, 3 Jul 2001 11:17:18 +0300 Subject: [Mplayer-users] Re: Compile Errors In-Reply-To: <20010630014518.A4461@653244hfc131.tampabay.rr.com>; from elmo@tampabay.rr.com on Sat, Jun 30, 2001 at 01:45:18AM -0400 References: <20010630014518.A4461@653244hfc131.tampabay.rr.com> Message-ID: <20010703111718.A19893@sci.fi> On Sat, Jun 30, 2001 at 01:45:18AM -0400, Tiklmelmo wrote: > any ideas? Maybe you're missing libstdc++? I might guess you can't compile any C++ code. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Tue Jul 3 12:39:27 2001 From: jaf.corporation at gmx.at (JAF) Date: Tue, 3 Jul 2001 12:39:27 +0200 Subject: [Mplayer-users] Howtos - small error in it References: <01070214384901.00683@astral> Message-ID: <000701c103ac$6f846390$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* Hi ... please look at DOCS/DEBIAN in the 2. or 3. line is directory wrong-written ;-) please correct ... because it's a bug ;-) mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 3 15:41:12 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 3 Jul 2001 15:41:12 +0200 (CEST) Subject: [Mplayer-users] scart vs rca Message-ID: <200107031341.PAA43248@thot.banki.hu> Hi, ep most kerult kezembe egy hq-nedis katalogus, vannak benne fasza rca-scart atalakitok. neten is fennvan: http://www.hqnedis.hu/downloads/KAT029.pdf lehet toluk postan rendelni jol. ja, es 3xRCA -> scart konverter csak 149 ft! ami neked kell imho az a "SCART 50" tipus. (az 51 nem jo, az kimenetre kene, pl. videorol digizeshez) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From adomjan at tvnet.hu Tue Jul 3 15:53:54 2001 From: adomjan at tvnet.hu (Domjan Attila) Date: Tue, 03 Jul 2001 15:53:54 +0200 Subject: [Mplayer-users] scart vs rca References: <200107031341.PAA43248@thot.banki.hu> Message-ID: <3B41CE72.3090601@tvnet.hu> En inkabb forrasztok :) Most VGA->SCART RGB-t csinaltam. Mezei VGA kartyaval ati r128. Sokkal jobb a kep a tv RGB -bemeneten.... Arpi wrote: > Hi, > > ep most kerult kezembe egy hq-nedis katalogus, vannak benne > fasza rca-scart atalakitok. > > neten is fennvan: > http://www.hqnedis.hu/downloads/KAT029.pdf > > lehet toluk postan rendelni jol. > > ja, es 3xRCA -> scart konverter csak 149 ft! > ami neked kell imho az a "SCART 50" tipus. > (az 51 nem jo, az kimenetre kene, pl. videorol digizeshez) > > > A'rpi / Astral & ESP-team > > -- > mailto:arpi at thot.banki.hu > http://esp-team.scene.hu > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > -- Take your computer to another dimension! http://www.linux.org _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 3 16:06:55 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 3 Jul 2001 16:06:55 +0200 (CEST) Subject: [Mplayer-users] scart vs rca In-Reply-To: <200107031341.PAA43248@thot.banki.hu> Message-ID: <200107031406.QAA10222@thot.banki.hu> Hi, > ep most kerult kezembe egy hq-nedis katalogus, vannak benne > fasza rca-scart atalakitok. ize, ez csak Gabunak akart menni de eltevedt :) (kellett nekem reply-to supportot implementalni mailer3-ba... :)) na mind1, hogy valami "jot" is mondjak: qrvara elbasztak domain reggelest, es nem hajlandoak fixalni... szal most m1 a vita veluk. (nem a magyarlinuxosokkal, azok jol adtak be a kerelmet, csak a reggelo ceg fasz) ez a mp.dev.hu / mplayer.dev.hu mennyire tuti/stabil/vegleges? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Tue Jul 3 16:05:18 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Tue, 3 Jul 2001 16:05:18 +0200 (CEST) Subject: [Mplayer-users] OpenGL In-Reply-To: <3B41CE72.3090601@tvnet.hu> Message-ID: Ehlo, I have just installed X with OpenGL acceleration and tried to run mplayer with -vo gl, and it started playing, only problem is that it displays white screen and nothing else. the only issue I can think of is that mplayer was compiled against utah-glx and since my utah-glx had no hardware accel I installed x4.1.0 with xlibmesa. is this known issue or should I issue a fully blown bugreport? -- Dariusz Pietrzak Nie wszystko dokumentnie zrozumia?em, ale od czasu do czasu chwyta?o mnie cu? za serce. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 3 16:14:34 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 3 Jul 2001 16:14:34 +0200 (CEST) Subject: [Mplayer-users] scart vs rca In-Reply-To: <3B41CE72.3090601@tvnet.hu> Message-ID: <200107031414.QAA47194@thot.banki.hu> Hi, > En inkabb forrasztok :) en is > Most VGA->SCART RGB-t csinaltam. Mezei VGA kartyaval ati r128. Sokkal > jobb a kep a tv RGB -bemeneten.... mar ha van a tv-n rgb bemenet... altalaban nincs bekotve a scart rgb resze :( A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From runa_spam at yahoo.com Tue Jul 3 17:17:44 2001 From: runa_spam at yahoo.com (mar tin) Date: Tue, 3 Jul 2001 08:17:44 -0700 (PDT) Subject: [Mplayer-users] BSOD in mplayer? In-Reply-To: Message-ID: <20010703151744.77810.qmail@web14505.mail.yahoo.com> Hey. im using Mplayer 0.17cvs-010622-01:45 (compiled with --disable-gcc-checking) and SDL 1.2.0 If I play the movie using the DGA vo driver, it's great. Now, the problem is when I try to use the XV or SDL video output driver: my movie window is blue. (ok. its a nice blue, but I want my movie ;). Any ideas? __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Tue Jul 3 17:25:36 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Tue, 3 Jul 2001 17:25:36 +0200 Subject: [Mplayer-users] BSOD in mplayer? In-Reply-To: <20010703151744.77810.qmail@web14505.mail.yahoo.com> References: <20010703151744.77810.qmail@web14505.mail.yahoo.com> Message-ID: <2614730871.20010703172536@gmx.de> Hello mar, Tuesday, July 03, 2001, 5:17:44 PM, you wrote: mt> Hey. im using Mplayer 0.17cvs-010622-01:45 (compiled mt> with --disable-gcc-checking) and SDL 1.2.0 mt> If I play the movie using the DGA vo driver, it's mt> great. Now, the problem is when I try to use the XV or mt> SDL video output driver: my movie window is blue. (ok. mt> its a nice blue, but I want my movie ;). mt> Any ideas? yes, buggy XVideo driver in your XFree. Maybe, (I'm not sure it's related cause yuv overlay is in hardware), you run X at 8bits per pixel. Try upgrading XFree to 4.0.3 or 4.1.0 -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Tue Jul 3 15:25:31 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Tue, 3 Jul 2001 15:25:31 +0200 Subject: [Mplayer-users] LATEST NEWS of mplayer In-Reply-To: ; from nickols_k@mail.ru on Tue, Jul 03, 2001 at 12:00:17PM +0000 References: Message-ID: <20010703152531.A1808@woodstock.localdomain> It's the Question that drives us, Nick Kurshev : > Could someone explain me what are problems with WindowMaker? > I use latest - 0.65 (with Hermes library support) and never meet any problem. > What should I do to determine them? I use WindowMaker-0.61.1-16mdk , and the first patch broke fullscreen totally. I was unable to switch between windows, and strangely enough when I switched workspace, the movie window followed somehow. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From runa_spam at yahoo.com Tue Jul 3 22:20:50 2001 From: runa_spam at yahoo.com (mar tin) Date: Tue, 3 Jul 2001 13:20:50 -0700 (PDT) Subject: [Mplayer-users] Re: Mplayer-users digest, Vol 1 #221 - 14 msgs In-Reply-To: Message-ID: <20010703202050.12750.qmail@web14507.mail.yahoo.com> mt> Hey. im using Mplayer 0.17cvs-010622-01:45 (compiled mt> with --disable-gcc-checking) and SDL 1.2.0 mt> If I play the movie using the DGA vo driver, it's mt> great. Now, the problem is when I try to use the XV or mt> SDL video output driver: my movie window is blue. (ok. mt> its a nice blue, but I want my movie ;). mt> >Any ideas? >yes, buggy XVideo driver in your XFree. Maybe, >(I'm not sure it's related cause yuv overlay is >in hardware), you run X at 8bits per >pixel. >Try upgrading XFree to 4.0.3 or 4.1.0 im running XFree 4.1.0 ... __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From rodolfo.borges at mail.com Wed Jul 4 05:27:04 2001 From: rodolfo.borges at mail.com (Rodolfo Borges) Date: Wed, 04 Jul 2001 00:27:04 -0300 Subject: [Mplayer-users] wrong scaling Message-ID: <200107040326.f643Ql416317@panther.unisys.com.br> the -x and -y options are not working well with SDL output. using -x 400 -y 200 is ok, but with -x 200 -y 400 the window is created with 75x150 pixels! -x 400 -y 400 produces a 300x300 window, but -x 400 -y 300 is ok. what's happening here? some bug? i'm using the latest mplayer, MPlayer-20010703.tar.bz2 thanks, rodolfo.borges at mail.com _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From rodolfo.borges at mail.com Wed Jul 4 05:53:57 2001 From: rodolfo.borges at mail.com (Rodolfo Borges) Date: Wed, 04 Jul 2001 00:53:57 -0300 Subject: [Mplayer-users] wrong scaling In-Reply-To: <200107040326.f643Ql416317@panther.unisys.com.br> References: <200107040326.f643Ql416317@panther.unisys.com.br> Message-ID: <200107040353.f643rg427296@panther.unisys.com.br> well, i looked at the sources, and the problem seems to be in the aspect() function of libvo/vo_sdl.c i just included a "newres.w = srcw; newres.h = srch;" at the end of the function to satisfy my needs, but i hope someone can fix it the right way. On Wed, 04 Jul 2001, Rodolfo Borges wrote: > the -x and -y options are not working well with SDL output. > > using -x 400 -y 200 is ok, but with -x 200 -y 400 the window > is created with 75x150 pixels! > -x 400 -y 400 produces a 300x300 window, but -x 400 -y 300 is ok. > what's happening here? some bug? > > i'm using the latest mplayer, MPlayer-20010703.tar.bz2 > > thanks, > rodolfo.borges at mail.com _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From mgraffam at idsi.net Wed Jul 4 06:00:04 2001 From: mgraffam at idsi.net (mgraffam at idsi.net) Date: Wed, 4 Jul 2001 00:00:04 -0400 (EDT) Subject: [Mplayer-users] VOBs to test w/ Mplayer ? Message-ID: Does anyone have a minute or two of a VOB on a server somewhere that I could download? I'm thinking of picking up a DVD drive for my Linux box, but I am unsure whether or not it can handle the playback, so I wanted to grab a few minutes of a VOB to test with, to see if my video card and processor can handle the load. Anyone have a pointer to a VOB, or an MPEG stream that is computationally as hard to decode as a VOB? Thanks. -- Michael Graffam (mgraffam at idsi.net) The importance of a suburban struggle has usually been underestimated; it is really very great. - Che Guevara (Guerilla Warfare, "Suburban Warfare") _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Wed Jul 4 07:45:23 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Wed, 4 Jul 2001 07:45:23 +0200 Subject: [Mplayer-users] wrong scaling In-Reply-To: <200107040353.f643rg427296@panther.unisys.com.br> References: <200107040326.f643Ql416317@panther.unisys.com.br> <200107040353.f643rg427296@panther.unisys.com.br> Message-ID: <63647881.20010704074523@gmx.de> Hello Rodolfo, Wednesday, July 04, 2001, 5:53:57 AM, you wrote: RB> well, i looked at the sources, and the problem seems RB> to be in the aspect() function of libvo/vo_sdl.c RB> i just included a "newres.w = srcw; newres.h = srch;" RB> at the end of the function to satisfy my needs, RB> but i hope someone can fix it the right way. thanks, I'll check it. Please tell me what screen resolution you are running (ie. 1280x1024). RB> On Wed, 04 Jul 2001, Rodolfo Borges wrote: >> the -x and -y options are not working well with SDL output. >> >> using -x 400 -y 200 is ok, but with -x 200 -y 400 the window >> is created with 75x150 pixels! >> -x 400 -y 400 produces a 300x300 window, but -x 400 -y 300 is ok. >> what's happening here? some bug? >> >> i'm using the latest mplayer, MPlayer-20010703.tar.bz2 >> >> thanks, >> rodolfo.borges at mail.com -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Wed Jul 4 07:43:24 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Wed, 4 Jul 2001 07:43:24 +0200 Subject: [Mplayer-users] Re: Mplayer-users digest, Vol 1 #221 - 14 msgs In-Reply-To: <20010703202050.12750.qmail@web14507.mail.yahoo.com> References: <20010703202050.12750.qmail@web14507.mail.yahoo.com> Message-ID: <188528700.20010704074324@gmx.de> Hello mar, Tuesday, July 03, 2001, 10:20:50 PM, you wrote: mt>> Hey. im using Mplayer 0.17cvs-010622-01:45 mt> (compiled mt>> with --disable-gcc-checking) and SDL 1.2.0 mt> If mt> I play the movie using the DGA vo driver, it's mt>> great. Now, the problem is when I try to use the mt> XV or mt>> SDL video output driver: my movie window is blue. mt> (ok. mt>> its a nice blue, but I want my movie ;). mt> >Any mt> ideas? >>yes, buggy XVideo driver in your XFree. Maybe, >(I'm mt> not sure it's related cause yuv overlay is >in mt> hardware), you run X at 8bits per >>pixel. >>Try upgrading XFree to 4.0.3 or 4.1.0 mt> im running XFree 4.1.0 ... Hmm, then maybe your graphics card doesn'T have enough memory left for the overlay, try lowering resolution of X. -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Wed Jul 4 12:57:25 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Wed, 04 Jul 2001 10:57:25 +0000 (:) Subject: [Mplayer-users] LATEST NEWS of mplayer Message-ID: Hi, Gabucino! On 2001-07-03 15:25:31 you wrote: >It's the Question that drives us, Nick Kurshev : >> Could someone explain me what are problems with WindowMaker? >> I use latest - 0.65 (with Hermes library support) and never meet any problem. >> What should I do to determine them? >I use WindowMaker-0.61.1-16mdk , and the first patch broke fullscreen >totally. I was unable to switch between windows, and strangely enough when I >switched workspace, the movie window followed somehow. These problems don't exist on my WindowMaker - I easy switch between windows; when I switch workspace mplayer's window doesn't follow to new space; by pressing 'F' I switch windowed and fullscreen modes without problems. So you should correct information on main page of mplayer. At lease you can point to WindowMaker-0.65 as solution of those problems. Best regards! Nick (2001-07-04 10:41:15) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Wed Jul 4 12:59:27 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Wed, 04 Jul 2001 10:59:27 +0000 (:) Subject: [Mplayer-users] MPlayer's speed! Message-ID: Hello! Not long ago I've reported that mplayer's speed don't satisfy me. But now I am amazed again. I just synced CVS and watched well known movie - 405.avi. I have found that mplayer can play me only 1 frame per 1 secs. I had highest speed when I watched this movie on P1-166 and K6-200 under WinNT with sound. What occured with mplayer's speed? Or maybe something wrong in my system? This effect exists with any -vo driver (I've tested -vo sdl, x11, xv) Below dump of screen: DEMUXER: Too many (4096 in 5613147 bytes) video packets in the buffer! (maybe you play a non-interleaved stream/file or video codec failed) DEMUXER: Too many (4096 in 5613147 bytes) video packets in the buffer! (maybe you play a non-interleaved stream/file or video codec failed) DEMUXER: Too many (4096 in 5613147 bytes) video packets in the buffer! (maybe you play a non-interleaved stream/file or video codec failed) Initial PTS delay: 136.369 sec (calculated: 0.033) A: 149.2 ( 12.8) V: 14.6 A-V: -1.740 ct: -0.152 440 15% 2% 0.0% 0 Exiting... (Quit) Below piece of mplayer.conf: vo=sdl #ao=sdl #fs=yes vm=no #bpp=0 zoom=no # x=800 # y=600 sound = 1 nosound = nein mixer = /dev/mixer master = no ffactor = 0.75 # fb = /dev/fb0 # framebuffer device to use # fbmode = 640x480-120 # use this mode (read from fb.modes!) # fbmodeconfig = /etc/fb.modes # the fb.modes file # monitor_hfreq = 31.5k-50k,70k # horizontal frequency range # monitor_vfreq = 50-90 # vertical frequency range # monitor_dotclock = 30M-300M # dotclock (or pixelclock) range #vo = sdl:x11 #ao = sdl:esd # noxv = no forcexv = yes # nodshow framedrop = yes My system: CPU: Duron-700 Video: S3VirgeDX PCI Audio: SB16PnP ISA Linux: 2.4.5 X: 4.1.0 SDL: 1.2.1 binutils: 2.11 gcc: 2.95.3 glibc: 2.1.3 Any suggestions please! Best regards! Nick _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 4 11:12:24 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 4 Jul 2001 11:12:24 +0200 (CEST) Subject: [Mplayer-users] fullscreen problems In-Reply-To: Message-ID: <200107040912.LAA31876@thot.banki.hu> Hi, > >It's the Question that drives us, Nick Kurshev : > >> Could someone explain me what are problems with WindowMaker? > >> I use latest - 0.65 (with Hermes library support) and never meet any problem. > >> What should I do to determine them? > >I use WindowMaker-0.61.1-16mdk , and the first patch broke fullscreen > >totally. I was unable to switch between windows, and strangely enough when I > >switched workspace, the movie window followed somehow. > These problems don't exist on my WindowMaker - I easy switch between windows; > when I switch workspace mplayer's window doesn't follow to new space; by pressing 'F' > I switch windowed and fullscreen modes without problems. So you should > correct information on main page of mplayer. At lease you can point to WindowMaker-0.65 > as solution of those problems. Now we have (in CVS) a new switch called -fsmode. It has 3 bits (3 flags) to en/disable code in the fullscreen code. -fsmode 0 = default, same as 0.18pre3 -fsmode 1 = same as 0.18pre2 (ICCCWM patch) -fsmode 2 = same as 0.17a you can play up to 7, it has some sense, but i think it will work with one of 0, 1 and 2 (depending on behaviour of your window manager) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 4 11:17:08 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 4 Jul 2001 11:17:08 +0200 (CEST) Subject: [Mplayer-users] MPlayer's speed! In-Reply-To: Message-ID: <200107040917.LAA31818@thot.banki.hu> Hi, > framedrop = yes try to disable this duron 700 with Xv should be enough for fullframe playback. > My system: > CPU: Duron-700 > Video: S3VirgeDX PCI > Audio: SB16PnP ISA > Linux: 2.4.5 > X: 4.1.0 > SDL: 1.2.1 > binutils: 2.11 > gcc: 2.95.3 > glibc: 2.1.3 > > Any suggestions please! try option -ni it may help for the 'too many packets in demuxer buffer...' problem. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Wed Jul 4 16:04:49 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Wed, 04 Jul 2001 14:04:49 +0000 (:) Subject: [Mplayer-users] MPlayer's speed! Message-ID: Hi, Arpi! On 2001-07-04 11:17:08 you wrote: >> framedrop = yes >try to disable this > >duron 700 with Xv should be enough for fullframe playback. > I thought same. But mplayer shows miracles of slowing down :( If I will disable 'framedrop=yes' I'll get A-V resync with large avis :( >> My system: >> CPU: Duron-700 >> Video: S3VirgeDX PCI >> Audio: SB16PnP ISA >> Linux: 2.4.5 >> X: 4.1.0 >> SDL: 1.2.1 >> binutils: 2.11 >> gcc: 2.95.3 >> glibc: 2.1.3 >> >> Any suggestions please! > >try option -ni >it may help for the 'too many packets in demuxer buffer...' problem. > Well, I tried but this option does nothing for this situation and I got the same dramatical slowdown of playback speed. May be mplayer's output will tell you something: MPlayer 0.17cvs-010704-09:58(C) 2000-2001 Arpad Gereoffy Reading /root/.mplayer/codecs.conf: 2 audio & 26 video codecs Font /root/.mplayer/font/font.desc loaded successfully! (117 chars) Detected AVI file format! ==> Found video stream: 0 ==> Found audio stream: 1 Detected NON-INTERLEAVED AVI file-format! VIDEO: [DIV3] 356x240 24bpp 30.00 fps 335.5 kbps (41.0 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:356x240 fps:30.00 ftime:=0.0333 Found audio codec: [mp3] drv:1 (MPEG layer-2, layer-3) dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer mp3lib: Processor ID: 631 mp3lib: Using AMD 3dnow-dsp(k7)! optimized decore. AUDIO: srate=44100 chans=2 bps=2 sfmt=0x10 ratio: 10000->176400 Found video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) Loading DLL: /usr/lib/win32/divx_c32.ax OK Using DirectShow codec: divx_c32.ax DShow: using YUY2 colorspace DivX setting result = 0 VO: [sdl] 356x240 => 356x240 Packed YUY2 VO: Description: SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!) VO: Author: Ryan C. Gordon , Felix Buenemann SDL: Using driver: x11 AO: [oss] 44100Hz Stereo Signed 16-bit (Little-Endian) AO: Description: OSS/ioctl audio output AO: Author: A'rpi ao2: 44100 Hz 2 chans Signed 16-bit (Little-Endian) audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian)) audio_setup: using 44100 Hz samplerate (requested: 44100) audio_setup: frags: 16/16 (4096 bytes/frag) free: 65536 Initial frame delay A: 1 V: 0 Start playing... A: 183.4 ( 183.4) V: 0.1 A-V:183.319 ct: 0.000 2 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.1 A-V:183.286 ct: 0.003 3 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.1 A-V:183.253 ct: 0.007 4 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.2 A-V:183.219 ct: 0.010 5 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.2 A-V:183.186 ct: 0.013 6 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.2 A-V:183.153 ct: 0.017 7 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.3 A-V:183.119 ct: 0.020 8 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.3 A-V:183.086 ct: 0.023 9 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.3 A-V:183.053 ct: 0.027 10 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.4 A-V:183.019 ct: 0.030 11 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.4 A-V:182.986 ct: 0.033 12 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.4 A-V:182.953 ct: 0.037 13 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.5 A-V:182.919 ct: 0.040 14 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.5 A-V:182.886 ct: 0.043 15 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.5 A-V:182.853 ct: 0.047 16 1% 1% 0.0% 0 A: 183.4 ( 183.4) V: 0.6 A-V:182.819 ct: 0.050 17 1% 1% 0.0% 0 Exiting... (Quit) What are these strange and big values - 183.4? Best regards! Nick (2001-07-04 13:58:15) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 4 12:36:39 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 4 Jul 2001 12:36:39 +0200 (CEST) Subject: [Mplayer-users] MPlayer's speed! In-Reply-To: Message-ID: <200107041036.MAA21194@thot.banki.hu> Hi, > >try option -ni > >it may help for the 'too many packets in demuxer buffer...' problem. > > > Well, I tried but this option does nothing for this situation and I got the same > dramatical slowdown of playback speed. > May be mplayer's output will tell you something: > > MPlayer 0.17cvs-010704-09:58(C) 2000-2001 Arpad Gereoffy > > Reading /root/.mplayer/codecs.conf: 2 audio & 26 video codecs > Font /root/.mplayer/font/font.desc loaded successfully! (117 chars) > Detected AVI file format! > ==> Found video stream: 0 > ==> Found audio stream: 1 > Detected NON-INTERLEAVED AVI file-format! > VIDEO: [DIV3] 356x240 24bpp 30.00 fps 335.5 kbps (41.0 kbyte/s) > [V] filefmt:3 fourcc:0x33564944 size:356x240 fps:30.00 ftime:=0.0333 > Found audio codec: [mp3] drv:1 (MPEG layer-2, layer-3) > dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer > mp3lib: Processor ID: 631 > mp3lib: Using AMD 3dnow-dsp(k7)! optimized decore. > AUDIO: srate=44100 chans=2 bps=2 sfmt=0x10 ratio: 10000->176400 > Found video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) > Loading DLL: /usr/lib/win32/divx_c32.ax OK > Using DirectShow codec: divx_c32.ax > DShow: using YUY2 colorspace > DivX setting result = 0 > VO: [sdl] 356x240 => 356x240 Packed YUY2 > VO: Description: SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!) > VO: Author: Ryan C. Gordon , Felix Buenemann > > SDL: Using driver: x11 > AO: [oss] 44100Hz Stereo Signed 16-bit (Little-Endian) > AO: Description: OSS/ioctl audio output > AO: Author: A'rpi > ao2: 44100 Hz 2 chans Signed 16-bit (Little-Endian) > audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian)) > audio_setup: using 44100 Hz samplerate (requested: 44100) > audio_setup: frags: 16/16 (4096 bytes/frag) free: 65536 > Initial frame delay A: 1 V: 0 > Start playing... > A: 183.4 ( 183.4) V: 0.1 A-V:183.319 ct: 0.000 2 0% 0% 0.0% 0 > A: 183.4 ( 183.4) V: 0.1 A-V:183.286 ct: 0.003 3 0% 0% 0.0% 0 > A: 183.4 ( 183.4) V: 0.1 A-V:183.253 ct: 0.007 4 0% 0% 0.0% 0 > A: 183.4 ( 183.4) V: 0.2 A-V:183.219 ct: 0.010 5 0% 0% 0.0% 0 > A: 183.4 ( 183.4) V: 0.2 A-V:183.186 ct: 0.013 6 0% 0% 0.0% 0 > A: 183.4 ( 183.4) V: 0.2 A-V:183.153 ct: 0.017 7 0% 0% 0.0% 0 > A: 183.4 ( 183.4) V: 0.3 A-V:183.119 ct: 0.020 8 0% 0% 0.0% 0 > A: 183.4 ( 183.4) V: 0.3 A-V:183.086 ct: 0.023 9 0% 0% 0.0% 0 > A: 183.4 ( 183.4) V: 0.3 A-V:183.053 ct: 0.027 10 0% 0% 0.0% 0 > A: 183.4 ( 183.4) V: 0.4 A-V:183.019 ct: 0.030 11 0% 0% 0.0% 0 > A: 183.4 ( 183.4) V: 0.4 A-V:182.986 ct: 0.033 12 0% 0% 0.0% 0 > A: 183.4 ( 183.4) V: 0.4 A-V:182.953 ct: 0.037 13 0% 0% 0.0% 0 > A: 183.4 ( 183.4) V: 0.5 A-V:182.919 ct: 0.040 14 0% 0% 0.0% 0 > A: 183.4 ( 183.4) V: 0.5 A-V:182.886 ct: 0.043 15 0% 0% 0.0% 0 > A: 183.4 ( 183.4) V: 0.5 A-V:182.853 ct: 0.047 16 1% 1% 0.0% 0 > A: 183.4 ( 183.4) V: 0.6 A-V:182.819 ct: 0.050 17 1% 1% 0.0% 0 > Exiting... (Quit) > > What are these strange and big values - 183.4? Ehh. I dunno, never seen such thing before ;( A-V should be 0, except it means delay. Maybe intial value of a_frame, v_frame, d_audio->ptr or d_video->pts isn't set to zero? (it was, but maybe some 'cleanups' killed it) Try some things: 1. try with -ni -bps 2. try with -vo null (and check the A-V value) 3. try with -nosound (is it 30fps then?) 4. disable framedrop, i'm interested in result 5. send me (upload to ftp) -v -v output. 6. try to find which version (CVS date) is first broken A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Wed Jul 4 12:40:16 2001 From: kinali at gmx.net (Attila Kinali) Date: Wed, 4 Jul 2001 12:40:16 +0200 (MEST) Subject: [Mplayer-users] MPlayer's speed! References: Message-ID: <21205.994243216@www55.gmx.net> Hi, >I have found that mplayer can play me only > 1 frame per 1 secs. I had highest speed when I watched this movie > on P1-166 and K6-200 under WinNT with sound. What occured with > mplayer's speed? Or maybe something wrong in my system? > This effect exists with any -vo driver (I've tested -vo sdl, x11, xv) > > Below dump of screen: > DEMUXER: Too many (4096 in 5613147 bytes) video packets in the buffer! > (maybe you play a non-interleaved stream/file or video codec failed) > I got this problem also, it depends here on the file (dont know why) This "Bug" came in iirc before the new libao2. When i mentioned this once, Arpi gave me the hint to increase both MAX_PACKS and MAX_PACK_BYTES (where increasing was a lot, about 4 times) in demuxer.h . Soon after this, it disapeared. And since then i didn't had a look at it. It also looks like that it is related to the used audio codec. I got it (maybe still get, cant check atm) always with mp3lib but not with libac3. If you need more informations please let me know Attila Kinali -- GMX - Die Kommunikationsplattform im Internet. http://www.gmx.net GMX Tipp: Machen Sie Ihr Hobby zu Geld bei unserem Partner 1&1! http://profiseller.de/info/index.php3?ac=OM.PS.PS003K00596T0409a _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From zombie at ip.portal.ru Wed Jul 4 14:54:46 2001 From: zombie at ip.portal.ru (Mike Komarovsky) Date: Wed, 4 Jul 2001 16:54:46 +0400 (MSD) Subject: [Mplayer-users] MPlayer's speed! In-Reply-To: <200107041036.MAA21194@thot.banki.hu> Message-ID: On Wed, 4 Jul 2001, Arpi wrote: >Hi, > >> >try option -ni >> >it may help for the 'too many packets in demuxer buffer...' problem. >> > >> Well, I tried but this option does nothing for this situation and I got the same >> dramatical slowdown of playback speed. >> May be mplayer's output will tell you something: >> >> MPlayer 0.17cvs-010704-09:58(C) 2000-2001 Arpad Gereoffy >> >> Reading /root/.mplayer/codecs.conf: 2 audio & 26 video codecs >> Font /root/.mplayer/font/font.desc loaded successfully! (117 chars) >> Detected AVI file format! >> ==> Found video stream: 0 >> ==> Found audio stream: 1 >> Detected NON-INTERLEAVED AVI file-format! >> VIDEO: [DIV3] 356x240 24bpp 30.00 fps 335.5 kbps (41.0 kbyte/s) >> [V] filefmt:3 fourcc:0x33564944 size:356x240 fps:30.00 ftime:=0.0333 >> Found audio codec: [mp3] drv:1 (MPEG layer-2, layer-3) >> dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer >> mp3lib: Processor ID: 631 >> mp3lib: Using AMD 3dnow-dsp(k7)! optimized decore. >> AUDIO: srate=44100 chans=2 bps=2 sfmt=0x10 ratio: 10000->176400 >> Found video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) >> Loading DLL: /usr/lib/win32/divx_c32.ax OK >> Using DirectShow codec: divx_c32.ax >> DShow: using YUY2 colorspace >> DivX setting result = 0 >> VO: [sdl] 356x240 => 356x240 Packed YUY2 >> VO: Description: SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!) >> VO: Author: Ryan C. Gordon , Felix Buenemann >> >> SDL: Using driver: x11 >> AO: [oss] 44100Hz Stereo Signed 16-bit (Little-Endian) >> AO: Description: OSS/ioctl audio output >> AO: Author: A'rpi >> ao2: 44100 Hz 2 chans Signed 16-bit (Little-Endian) >> audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian)) >> audio_setup: using 44100 Hz samplerate (requested: 44100) >> audio_setup: frags: 16/16 (4096 bytes/frag) free: 65536 >> Initial frame delay A: 1 V: 0 >> Start playing... >> A: 183.4 ( 183.4) V: 0.1 A-V:183.319 ct: 0.000 2 0% 0% 0.0% 0 >> A: 183.4 ( 183.4) V: 0.1 A-V:183.286 ct: 0.003 3 0% 0% 0.0% 0 >> A: 183.4 ( 183.4) V: 0.1 A-V:183.253 ct: 0.007 4 0% 0% 0.0% 0 >> A: 183.4 ( 183.4) V: 0.2 A-V:183.219 ct: 0.010 5 0% 0% 0.0% 0 >> A: 183.4 ( 183.4) V: 0.2 A-V:183.186 ct: 0.013 6 0% 0% 0.0% 0 >> A: 183.4 ( 183.4) V: 0.2 A-V:183.153 ct: 0.017 7 0% 0% 0.0% 0 >> A: 183.4 ( 183.4) V: 0.3 A-V:183.119 ct: 0.020 8 0% 0% 0.0% 0 >> A: 183.4 ( 183.4) V: 0.3 A-V:183.086 ct: 0.023 9 0% 0% 0.0% 0 >> A: 183.4 ( 183.4) V: 0.3 A-V:183.053 ct: 0.027 10 0% 0% 0.0% 0 >> A: 183.4 ( 183.4) V: 0.4 A-V:183.019 ct: 0.030 11 0% 0% 0.0% 0 >> A: 183.4 ( 183.4) V: 0.4 A-V:182.986 ct: 0.033 12 0% 0% 0.0% 0 >> A: 183.4 ( 183.4) V: 0.4 A-V:182.953 ct: 0.037 13 0% 0% 0.0% 0 >> A: 183.4 ( 183.4) V: 0.5 A-V:182.919 ct: 0.040 14 0% 0% 0.0% 0 >> A: 183.4 ( 183.4) V: 0.5 A-V:182.886 ct: 0.043 15 0% 0% 0.0% 0 >> A: 183.4 ( 183.4) V: 0.5 A-V:182.853 ct: 0.047 16 1% 1% 0.0% 0 >> A: 183.4 ( 183.4) V: 0.6 A-V:182.819 ct: 0.050 17 1% 1% 0.0% 0 >> Exiting... (Quit) >> Hi, I have the same result with 18pre3 compiled on Redhat 7.1 with upgraded 2.96 compiler...thought the problem came from compiler... -bps and framedrop disabling gives no cure, same results. I can post output if someone wants. >> What are these strange and big values - 183.4? >Ehh. I dunno, never seen such thing before ;( >A-V should be 0, except it means delay. > >Maybe intial value of a_frame, v_frame, d_audio->ptr or d_video->pts isn't set to zero? >(it was, but maybe some 'cleanups' killed it) > >Try some things: >1. try with -ni -bps >2. try with -vo null (and check the A-V value) >3. try with -nosound (is it 30fps then?) >4. disable framedrop, i'm interested in result >5. send me (upload to ftp) -v -v output. >6. try to find which version (CVS date) is first broken > > >A'rpi / Astral & ESP-team > >-- >mailto:arpi at thot.banki.hu >http://esp-team.scene.hu > >_______________________________________________ >Mplayer-users mailing list >Mplayer-users at lists.sourceforge.net >http://lists.sourceforge.net/lists/listinfo/mplayer-users > Regards, .?????. zombieatipdotportaldotru _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From mmark at koala.ichpw.zabrze.pl Wed Jul 4 21:25:35 2001 From: mmark at koala.ichpw.zabrze.pl (Marek Mentel) Date: Wed, 04 Jul 2001 15:25:35 -0400 (EDT) Subject: [Mplayer-users] subtitle - vplayer format In-Reply-To: Message-ID: <200107041330.f64DUEC30050@koala.ichpw.zabrze.pl> I have found subtitle file in (probably) vplayer format that make mplayer to crash ( segfault) . It looks like subspec of main vplayer format : 00:04:01 Co s ycha?, panie Lombardo? 00:04:19 Widzia a? jego oczy? There is no last ':' after sec - there is one space instead. -------------------------------------------------------- Marek Mentel mmark at koala.ichpw.zabrze.pl 2:484/3.8 INSTITUTE FOR CHEMICAL PROCESSING OF COAL , Zabrze , POLAND NOTE: my opinions are strictly my own and not those of my employer _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Wed Jul 4 10:11:43 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Wed, 4 Jul 2001 10:11:43 +0200 Subject: [Mplayer-users] LATEST NEWS of mplayer In-Reply-To: ; from nickols_k@mail.ru on Wed, Jul 04, 2001 at 10:57:25AM +0000 References: Message-ID: <20010704101143.A1632@woodstock.localdomain> It's the Question that drives us, Nick Kurshev : > These problems don't exist on my WindowMaker - I easy switch between windows; > when I switch workspace mplayer's window doesn't follow to new space; by pressing 'F' > I switch windowed and fullscreen modes without problems. So you should > correct information on main page of mplayer. At lease you can point to WindowMaker-0.65 > as solution of those problems. First: I don't use SDL, and I think I didn't try it. Second: the current version (after Pontscho patched the ICCCM patch) of MPlayer worked on my WindowMaker. Now the only windowmanagers that are known to have problems are KDE(2), and Motifs. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From enlar at iname.com Wed Jul 4 18:12:06 2001 From: enlar at iname.com (Eneko Lacunza) Date: 04 Jul 2001 18:12:06 +0200 Subject: [Mplayer-users] fsdga Message-ID: <994263130.834.0.camel@eneko> Hi All, I'm having some trouble with fsdga output playing MPEG1 files (other formats not tested)... it makes small stops during playback; the more quality, more and greater stops. For example, I get small stops with a video, even though I have about 15%-20% idle time in the cpu. I'm using Mplayer 17a IdegCounter. CPU is a Duron/900, XFree 4.0.3, MGA driver. Any ideas? (I'm using second output to fullscreen TV, so Xv is not an option) Thanks a lot, Eneko Lacunza. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 4 18:42:14 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 4 Jul 2001 18:42:14 +0200 (CEST) Subject: [Mplayer-users] LATEST NEWS of mplayer In-Reply-To: <20010704101143.A1632@woodstock.localdomain> Message-ID: <200107041642.SAA47268@thot.banki.hu> Hi, > It's the Question that drives us, Nick Kurshev : > > These problems don't exist on my WindowMaker - I easy switch between windows; > > when I switch workspace mplayer's window doesn't follow to new space; by pressing 'F' > > I switch windowed and fullscreen modes without problems. So you should > > correct information on main page of mplayer. At lease you can point to WindowMaker-0.65 > > as solution of those problems. > First: I don't use SDL, and I think I didn't try it. > Second: the current version (after Pontscho patched the ICCCM patch) of MPlayer pontscho _removed_ the icccwm patch, and fixed his original motif-based (using standard motif hints) fullscreen code to work with icewm. > worked on my WindowMaker. Now the only windowmanagers that are known to have > problems are KDE(2), and Motifs. yes. you can toggle codes with -fsmode bits: bit 0 (1) - 1 = enable ICCCWM (override everything, alwaysontop) patch bit 1 (2) - 0=bugfixed motif hints (0.18pre3) 1 = buggy (0.17a) bit 2 (4) - 0=properties=5 1=properties=4 (i dunno what's it, but may help) so you can combine numbers from 0 to 7. altough, i think 0 and 1 are the most common solutions (1 for kde2+motif, 0 for others) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Wed Jul 4 18:31:00 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Wed, 4 Jul 2001 18:31:00 +0200 (CEST) Subject: [Mplayer-users] subtitle - vplayer format In-Reply-To: <200107041330.f64DUEC30050@koala.ichpw.zabrze.pl> Message-ID: > It looks like subspec of main vplayer format : > > 00:04:01 Co s ycha?, panie Lombardo? > 00:04:19 Widzia a? jego oczy? I'll check it out. > There is no last ':' after sec - there is one space instead. d'ah. Look's exactly like vplayer with 00:04:Text. -- Dariusz Pietrzak That which does not kill me had better run pretty damn fast. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Wed Jul 4 18:40:58 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Wed, 4 Jul 2001 18:40:58 +0200 Subject: [Mplayer-users] fsdga In-Reply-To: <994263130.834.0.camel@eneko>; from enlar@iname.com on Wed, Jul 04, 2001 at 06:12:06PM +0200 References: <994263130.834.0.camel@eneko> Message-ID: <20010704184058.A1633@woodstock.localdomain> It's the Question that drives us, Eneko Lacunza : > I'm using Mplayer 17a IdegCounter. Compile 0.18pre3, and use framedrop. I'd consider using matroxfb.. See DOCS/TVout-G400 -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From tibcu at sch.bme.hu Wed Jul 4 19:02:30 2001 From: tibcu at sch.bme.hu (Balazs Tibor) Date: Wed, 4 Jul 2001 19:02:30 +0200 (MEST) Subject: [Mplayer-users] fsdga In-Reply-To: <20010704184058.A1633@woodstock.localdomain> Message-ID: > Compile 0.18pre3, and use framedrop. I'd consider using matroxfb.. > See DOCS/TVout-G400 > -- > Gabucino Gabu, I think, A'rpi disabled fsdga in pre2 :-( (it's obsolote) Tibcu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Wed Jul 4 19:18:21 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Wed, 4 Jul 2001 19:18:21 +0200 Subject: [Mplayer-users] fsdga In-Reply-To: ; from tibcu@sch.bme.hu on Wed, Jul 04, 2001 at 07:02:30PM +0200 References: <20010704184058.A1633@woodstock.localdomain> Message-ID: <20010704191821.A1917@woodstock.localdomain> It's the Question that drives us, Balazs Tibor : > > Compile 0.18pre3, and use framedrop. I'd consider using matroxfb.. > > See DOCS/TVout-G400 > Gabu, I think, A'rpi disabled fsdga in pre2 :-( Hmm he really did. Good. > (it's obsolote) BTW what about using fsdga code in dga driver? (for example with -zoom) -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From stefan at nicolinux.de Wed Jul 4 19:20:20 2001 From: stefan at nicolinux.de (Stefan Nicolin) Date: Wed, 4 Jul 2001 19:20:20 +0200 Subject: [Mplayer-users] VOBs to test w/ Mplayer ? In-Reply-To: References: Message-ID: <20010704192020.00403cfe.stefan@nicolinux.de> On Wed, 4 Jul 2001 00:00:04 -0400 (EDT) mgraffam at idsi.net wrote: > > Does anyone have a minute or two of a VOB on a server somewhere that I > could download? > > I'm thinking of picking up a DVD drive for my Linux box, but I am unsure > whether or not it can handle the playback, so I wanted to grab a few > minutes of a VOB to test with, to see if my video card and processor can > handle the load. > > Anyone have a pointer to a VOB, or an MPEG stream that is computationally > as hard to decode as a VOB? > > Thanks. hi take a look at http://www.7thzone.com/ goto download and look for the trailers (you must have an account to access it, I don't so I can't guarantee it) regards, Stefan _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 4 19:19:11 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 4 Jul 2001 19:19:11 +0200 (CEST) Subject: [Mplayer-users] fsdga In-Reply-To: Message-ID: <200107041719.TAA11984@thot.banki.hu> Hi, > > Compile 0.18pre3, and use framedrop. I'd consider using matroxfb.. > > See DOCS/TVout-G400 > > -- > > Gabucino > > Gabu, I think, A'rpi disabled fsdga in pre2 :-( > > (it's obsolote) > yes, i did. the yv12 scaler code (btw it's useless slooooow) should be merged into the main dga driver (Acki told me that he will do it but not yet done) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From enlar at iname.com Wed Jul 4 19:27:27 2001 From: enlar at iname.com (Eneko Lacunza) Date: 04 Jul 2001 19:27:27 +0200 Subject: [Mplayer-users] fsdga In-Reply-To: <20010704184058.A1633@woodstock.localdomain> References: <994263130.834.0.camel@eneko> <20010704184058.A1633@woodstock.localdomain> Message-ID: <994267660.1465.0.camel@eneko> Hi Gabucino, On 04 Jul 2001 18:40:58 +0200, Gabucino wrote: > It's the Question that drives us, Eneko Lacunza : > > I'm using Mplayer 17a IdegCounter. > Compile 0.18pre3, and use framedrop. I'd consider using matroxfb.. > See DOCS/TVout-G400 Seems as I really should, as fsdga is deprecated 8) Thanks! Eneko. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Wed Jul 4 22:31:01 2001 From: kinali at gmx.net (Attila Kinali) Date: Wed, 4 Jul 2001 22:31:01 +0200 Subject: [Mplayer-users] VOBs to test w/ Mplayer ? In-Reply-To: References: Message-ID: On Wed, 4 Jul 2001 00:00:04 -0400 (EDT) mgraffam at idsi.net wrote: > Does anyone have a minute or two of a VOB on a server somewhere that I > could download? attila.kinali.ch/mplayer/trailer.vob (66MB) As it is not small and my bandwith is rather limited, please download it over night (that means from 02:00 to 06:00 CEST). Please drop me an email if you're finished. Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Thu Jul 5 03:38:26 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Thu, 05 Jul 2001 01:38:26 +0000 (:) Subject: [Mplayer-users] MPlayer's speed! Message-ID: Hi, Arpi! On 2001-07-04 12:36:39 you wrote: >> A: 183.4 ( 183.4) V: 0.6 A-V:182.819 ct: 0.050 17 1% 1% 0.0% 0 >> Exiting... (Quit) >> >> What are these strange and big values - 183.4? >Ehh. I dunno, never seen such thing before ;( >A-V should be 0, except it means delay. > >Maybe intial value of a_frame, v_frame, d_audio->ptr or d_video->pts isn't set to zero? >(it was, but maybe some 'cleanups' killed it) > >Try some things: >1. try with -ni -bps Result is same A: 183.4 ( 183.4) V: 0.4 A-V:183.019 ct: 0.030 11 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.4 A-V:182.986 ct: 0.033 12 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.4 A-V:182.953 ct: 0.037 13 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.5 A-V:182.919 ct: 0.040 14 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.5 A-V:182.886 ct: 0.043 15 0% 0% 0.0% 0 >2. try with -vo null (and check the A-V value) Result is same A: 183.4 ( 183.4) V: 0.6 A-V:182.786 ct: 0.053 18 1% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.6 A-V:182.753 ct: 0.057 19 1% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.7 A-V:182.719 ct: 0.060 20 1% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.7 A-V:182.686 ct: 0.063 21 1% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.7 A-V:182.653 ct: 0.067 22 1% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.8 A-V:182.619 ct: 0.070 23 1% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.8 A-V:182.586 ct: 0.073 24 1% 0% 0.0% 0 Exiting... (Quit) >3. try with -nosound (is it 30fps then?) YES!!! PERFECT!!! I'VE WATCHED IN REALTIME SDL: Using driver: x11 Audio: no sound Start playing... V: 0.2 6 0% 0% 0.0% V: 0.3 11 0% 0% 0.0% V: 0.5 16 1% 1% 0.0% V: 0.7 21 1% 1% 0.0% V: 0.8 26 0% 1% 0.0% V: 1.0 31 0% 1% 0.0% V: 1.2 36 0% 1% 0.0% V: 1.3 41 0% 1% 0.0% V: 1.5 46 0% 1% 0.0% V: 1.7 51 1% 1% 0.0% V: 1.8 56 1% 1% 0.0% V: 2.0 61 2% 1% 0.0% V: 2.2 66 2% 1% 0.0% Exiting... (Quit) >4. disable framedrop, i'm interested in result Result is same A: 183.4 ( 183.4) V: 0.4 A-V:183.019 ct: 0.030 11 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.4 A-V:182.986 ct: 0.033 12 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.4 A-V:182.953 ct: 0.037 13 0% 0% 0.0% 0 A: 183.4 ( 183.4) V: 0.5 A-V:182.919 ct: 0.040 14 0% 0% 0.0% 0 Exiting... (Quit) >5. send me (upload to ftp) -v -v output. I've send it personally you, Arpi! >6. try to find which version (CVS date) is first broken The earliest snapshot which I have is from 16-jun-2001 but it has same problems too. All things are same. Best regards! Nick (2001-07-05 01:31:52) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Thu Jul 5 09:42:29 2001 From: atmosfear at users.sourceforge.net (=?koi8-r?B?RmVsaXggQthuZW1hbm4=?=) Date: Thu, 5 Jul 2001 09:42:29 +0200 Subject: [Mplayer-users] LATEST NEWS of mplayer In-Reply-To: References: Message-ID: <8894080350.20010705094229@gmx.de> Hello Nick, Wednesday, July 04, 2001, 12:57:25 PM, you wrote: NK> Hi, Gabucino! NK> On 2001-07-03 15:25:31 you wrote: >>It's the Question that drives us, Nick Kurshev : >>> Could someone explain me what are problems with WindowMaker? >>> I use latest - 0.65 (with Hermes library support) and never meet any problem. >>> What should I do to determine them? >>I use WindowMaker-0.61.1-16mdk , and the first patch broke fullscreen >>totally. I was unable to switch between windows, and strangely enough when I >>switched workspace, the movie window followed somehow. NK> These problems don't exist on my WindowMaker - I easy switch between windows; NK> when I switch workspace mplayer's window doesn't follow to new space; by pressing 'F' NK> I switch windowed and fullscreen modes without problems. So you should NK> correct information on main page of mplayer. At lease you can point to WindowMaker-0.65 NK> as solution of those problems. You use SDL out it has npothing to do with probs of x11/xv/xmga out. I know it was somewhere mentioned sdl out would have those probs, too but it's incorrect. NK> Best regards! Nick (2001-07-04 10:41:15) -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From zombie at ip.portal.ru Thu Jul 5 19:38:17 2001 From: zombie at ip.portal.ru (Mike Komarovsky) Date: Thu, 5 Jul 2001 21:38:17 +0400 (MSD) Subject: [Mplayer-users] MPlayer's speed! In-Reply-To: Message-ID: On Wed, 4 Jul 2001, Mike Komarovsky wrote: Hi, The root of my problem that whereis no info on 'make dep' after executing configure, just 'make'. After usual 'make dep;make' all my problems gone. >On Wed, 4 Jul 2001, Arpi wrote: > >>Hi, >> >>> >try option -ni >>> >it may help for the 'too many packets in demuxer buffer...' problem. >>> > >>> Well, I tried but this option does nothing for this situation and I got the same >>> dramatical slowdown of playback speed. >>> May be mplayer's output will tell you something: >>> >>> MPlayer 0.17cvs-010704-09:58(C) 2000-2001 Arpad Gereoffy >>> >>> Reading /root/.mplayer/codecs.conf: 2 audio & 26 video codecs >>> Font /root/.mplayer/font/font.desc loaded successfully! (117 chars) >>> Detected AVI file format! >>> ==> Found video stream: 0 >>> ==> Found audio stream: 1 >>> Detected NON-INTERLEAVED AVI file-format! >>> VIDEO: [DIV3] 356x240 24bpp 30.00 fps 335.5 kbps (41.0 kbyte/s) >>> [V] filefmt:3 fourcc:0x33564944 size:356x240 fps:30.00 ftime:=0.0333 >>> Found audio codec: [mp3] drv:1 (MPEG layer-2, layer-3) >>> dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer >>> mp3lib: Processor ID: 631 >>> mp3lib: Using AMD 3dnow-dsp(k7)! optimized decore. >>> AUDIO: srate=44100 chans=2 bps=2 sfmt=0x10 ratio: 10000->176400 >>> Found video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) >>> Loading DLL: /usr/lib/win32/divx_c32.ax OK >>> Using DirectShow codec: divx_c32.ax >>> DShow: using YUY2 colorspace >>> DivX setting result = 0 >>> VO: [sdl] 356x240 => 356x240 Packed YUY2 >>> VO: Description: SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!) >>> VO: Author: Ryan C. Gordon , Felix Buenemann >>> >>> SDL: Using driver: x11 >>> AO: [oss] 44100Hz Stereo Signed 16-bit (Little-Endian) >>> AO: Description: OSS/ioctl audio output >>> AO: Author: A'rpi >>> ao2: 44100 Hz 2 chans Signed 16-bit (Little-Endian) >>> audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian)) >>> audio_setup: using 44100 Hz samplerate (requested: 44100) >>> audio_setup: frags: 16/16 (4096 bytes/frag) free: 65536 >>> Initial frame delay A: 1 V: 0 >>> Start playing... >>> A: 183.4 ( 183.4) V: 0.1 A-V:183.319 ct: 0.000 2 0% 0% 0.0% 0 >>> A: 183.4 ( 183.4) V: 0.1 A-V:183.286 ct: 0.003 3 0% 0% 0.0% 0 >>> A: 183.4 ( 183.4) V: 0.1 A-V:183.253 ct: 0.007 4 0% 0% 0.0% 0 >>> A: 183.4 ( 183.4) V: 0.2 A-V:183.219 ct: 0.010 5 0% 0% 0.0% 0 >>> A: 183.4 ( 183.4) V: 0.2 A-V:183.186 ct: 0.013 6 0% 0% 0.0% 0 >>> A: 183.4 ( 183.4) V: 0.2 A-V:183.153 ct: 0.017 7 0% 0% 0.0% 0 >>> A: 183.4 ( 183.4) V: 0.3 A-V:183.119 ct: 0.020 8 0% 0% 0.0% 0 >>> A: 183.4 ( 183.4) V: 0.3 A-V:183.086 ct: 0.023 9 0% 0% 0.0% 0 >>> A: 183.4 ( 183.4) V: 0.3 A-V:183.053 ct: 0.027 10 0% 0% 0.0% 0 >>> A: 183.4 ( 183.4) V: 0.4 A-V:183.019 ct: 0.030 11 0% 0% 0.0% 0 >>> A: 183.4 ( 183.4) V: 0.4 A-V:182.986 ct: 0.033 12 0% 0% 0.0% 0 >>> A: 183.4 ( 183.4) V: 0.4 A-V:182.953 ct: 0.037 13 0% 0% 0.0% 0 >>> A: 183.4 ( 183.4) V: 0.5 A-V:182.919 ct: 0.040 14 0% 0% 0.0% 0 >>> A: 183.4 ( 183.4) V: 0.5 A-V:182.886 ct: 0.043 15 0% 0% 0.0% 0 >>> A: 183.4 ( 183.4) V: 0.5 A-V:182.853 ct: 0.047 16 1% 1% 0.0% 0 >>> A: 183.4 ( 183.4) V: 0.6 A-V:182.819 ct: 0.050 17 1% 1% 0.0% 0 >>> Exiting... (Quit) >>> > >Hi, >I have the same result with 18pre3 compiled on Redhat 7.1 with upgraded >2.96 compiler...thought the problem came from compiler... -bps and >framedrop disabling gives no cure, same results. I can post output if >someone wants. > >>> What are these strange and big values - 183.4? >>Ehh. I dunno, never seen such thing before ;( >>A-V should be 0, except it means delay. >> >>Maybe intial value of a_frame, v_frame, d_audio->ptr or d_video->pts isn't set to zero? >>(it was, but maybe some 'cleanups' killed it) >> >>Try some things: >>1. try with -ni -bps >>2. try with -vo null (and check the A-V value) >>3. try with -nosound (is it 30fps then?) >>4. disable framedrop, i'm interested in result >>5. send me (upload to ftp) -v -v output. >>6. try to find which version (CVS date) is first broken >> >> >>A'rpi / Astral & ESP-team >> >>-- >>mailto:arpi at thot.banki.hu >>http://esp-team.scene.hu >> >>_______________________________________________ >>Mplayer-users mailing list >>Mplayer-users at lists.sourceforge.net >>http://lists.sourceforge.net/lists/listinfo/mplayer-users >> >Regards, >.?????. >zombieatipdotportaldotru > > >_______________________________________________ >Mplayer-users mailing list >Mplayer-users at lists.sourceforge.net >http://lists.sourceforge.net/lists/listinfo/mplayer-users > .?????. zombie_at_ip_portal_ru _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Thu Jul 5 12:36:16 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Thu, 05 Jul 2001 10:36:16 +0000 (:) Subject: [Mplayer-users] MPlayer's speed! In-Reply-To: <200107041036.MAA21194@thot.banki.hu> Message-ID: Hello, Arpi! I've got this message: ********************************************** ** THIS IS A WARNING MESSAGE ONLY ** ** YOU DO NOT NEED TO RESEND YOUR MESSAGE ** ********************************************** The original message was received at Thu, 5 Jul 2001 01:40:03 +0400 (MSD) from mx2.int [10.0.0.33] ----- The following addresses had transient non-fatal errors ----- ----- Transcript of session follows ----- 451 ... thot.banki.hu: Name server timeout Warning: message still undelivered after 8 hours Will keep trying until message is 5 days old ----------------------------------------------------------------------- In this connexion, I ve upload mplayer's debug output to: ftp://mplayer.dev.hu/MPlayer/incoming/v-v.bz2 Please look at! Best regards! Nick _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From rodolfo.borges at mail.com Fri Jul 6 00:25:00 2001 From: rodolfo.borges at mail.com (Rodolfo Borges) Date: Thu, 05 Jul 2001 19:25:00 -0300 Subject: [Mplayer-users] wrong scaling In-Reply-To: <63647881.20010704074523@gmx.de> References: <200107040326.f643Ql416317@panther.unisys.com.br> <200107040353.f643rg427296@panther.unisys.com.br> <63647881.20010704074523@gmx.de> Message-ID: <200107052224.f65MOeV19127@panther.unisys.com.br> On Wed, 4 Jul 2001, Felix B?nemann wrote: > Please tell me what screen resolution you are running (ie. > 1280x1024). does it matter? anyway, it's 1024x768 on my machine. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From luca at lucarella.com.ar Fri Jul 6 00:25:00 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Thu, 5 Jul 2001 19:25:00 -0300 (ART) Subject: [Mplayer-users] OpenDivX Message-ID: <200107052339.TAA30592@burns.luca.2y.net> Hi! I wan't to know if it's planned so support opendivx output encoding with sound, and if somebody know any other encoder program to encode your own opendivx videos... Thanks! -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 6 00:28:36 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 6 Jul 2001 00:28:36 +0200 (CEST) Subject: [Mplayer-users] MPlayer's speed! In-Reply-To: Message-ID: <200107052228.AAA11838@thot.banki.hu> Hi, > I've got this message: > > ********************************************** > ** THIS IS A WARNING MESSAGE ONLY ** > ** YOU DO NOT NEED TO RESEND YOUR MESSAGE ** > ********************************************** > > The original message was received at Thu, 5 Jul 2001 01:40:03 +0400 (MSD) > from mx2.int [10.0.0.33] > > ----- The following addresses had transient non-fatal errors ----- > > > ----- Transcript of session follows ----- > 451 ... thot.banki.hu: Name server timeout strange. and i got this message... so here comes my notes: Found audio codec: [mp3] drv:1 (MPEG layer-2, layer-3) Initializing audio codec... dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer mp3lib: Processor ID: 631 mp3lib: Using AMD 3dnow-dsp(k7)! optimized decore. DEMUX_AVI: Read 372 data bytes from packet 62773130 DEMUX: Append packet to d_audio, len=372 pts=0.000 pos=2 [packs: A=1 V=0] DEMUX_AVI: Read 372 data bytes from packet 62773130 DEMUX: Append packet to d_audio, len=372 pts=0.000 pos=4 [packs: A=1 V=0] ... (here it reads the _whole_ audio stream from the file) ... start playing... but no audio stream (it's at EOF) So it seems to be a bug in mp3lib, or the audio steram of the file. Do you have this problem with other files too, or only with this? You should check/debug why mp3lib reads the whole stream at initialization (it can't find/sync mp3 header?). Maybe it isn't mp3 ? Hmm. just noticed at the header: ======= WAVE Format ======= Format Tag: 353 (0x161) 0x161 is id of divx audio, not mp3! but why mp3lib is called then? maybe you have afm=1 in the config file? (it forces using mp3lib for audio decoding). or do you have bad codecs.conf... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Fri Jul 6 00:52:38 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Fri, 6 Jul 2001 00:52:38 +0200 Subject: [Mplayer-users] OpenDivX In-Reply-To: <200107052339.TAA30592@burns.luca.2y.net>; from luca@lucarella.com.ar on Thu, Jul 05, 2001 at 07:25:00PM -0300 References: <200107052339.TAA30592@burns.luca.2y.net> Message-ID: <20010706005238.A2421@woodstock.localdomain> It's the Question that drives us, Leandro Lucarella : > Hi! I wan't to know if it's planned so support opendivx output encoding > with sound, and if somebody know any other encoder program to encode your > own opendivx videos... RTFM DOCS/OpenDivX -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From arpi at thot.banki.hu Fri Jul 6 05:42:42 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 6 Jul 2001 05:42:42 +0200 (CEST) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) Message-ID: <200107060342.FAA47710@thot.banki.hu> Hi, Just made 0.18pre4 public. News: - new switch to workaroudn window manager bugs: -fsmod (try n value 0-7) - included libavcodec from Gerard Lantau's FFmpeg package it has native (not Win32 hack) DivX ;-) and OpenDivX codec! I made some measurements, and DivX seems to be even faster than DirectShow codec without preprocessing, and only a few percent slower than ProjectMayo's opendivx decoder. It uses YV12 pixel format, so old Voodoo users can use it for YUV. If you have problems compiling it (it requires nasm, for example) then simply rename or delete the libavcodec subdirectory and re-run ./configure (compiler/environment detection has not been done for libavcodec) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Fri Jul 6 12:36:51 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Fri, 06 Jul 2001 10:36:51 +0000 (:) Subject: [Mplayer-users] MPlayer's speed! In-Reply-To: <200107052228.AAA11838@thot.banki.hu> Message-ID: Hi, Arpi! On 2001-07-06 00:28:36 you wrote: >so here comes my notes: > >Found audio codec: [mp3] drv:1 (MPEG layer-2, layer-3) >Initializing audio codec... >dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer >mp3lib: Processor ID: 631 >mp3lib: Using AMD 3dnow-dsp(k7)! optimized decore. >DEMUX_AVI: Read 372 data bytes from packet 62773130 >DEMUX: Append packet to d_audio, len=372 pts=0.000 pos=2 [packs: A=1 V=0] >DEMUX_AVI: Read 372 data bytes from packet 62773130 >DEMUX: Append packet to d_audio, len=372 pts=0.000 pos=4 [packs: A=1 V=0] >... >(here it reads the _whole_ audio stream from the file) >... >start playing... >but no audio stream (it's at EOF) > >So it seems to be a bug in mp3lib, or the audio steram of the file. >Do you have this problem with other files too, or only with this? >You should check/debug why mp3lib reads the whole stream at initialization >(it can't find/sync mp3 header?). Maybe it isn't mp3 ? > >Hmm. just noticed at the header: >======= WAVE Format ======= >Format Tag: 353 (0x161) > >0x161 is id of divx audio, not mp3! but why mp3lib is called then? > >maybe you have afm=1 in the config file? (it forces using mp3lib >for audio decoding). or do you have bad codecs.conf... > I'm sorry! You are perfectly right! I had commented out all audio codecs excpet native - mp3 and ac3 - for testing purposes only, because before mplayer called l3codec.dll for mp3 stream but now it seems that mplayer uses native mp3lib codec. Well after updating codecs.conf I've got realtime playback for this movie but mplayer says: Audio: no sound Why? This movie has sound stream - I know it. All other avis (which have mp3 stream) is being played with sound. May be it would be better -v -v again? And last observation: when I tried following options of config: ao=sdl # To specify default audio driver (see -ao help for # list) ao = sdl:esd # use SDL audio driver by default # use "ao = sdl:esd" to use SDL's ESD driver I've got very distorted sound on output from my SB16. (basses were very weak but highest frequencies were top loud and distorted). Is it a bug or is it a feature? After commenting out 'ao = sdl:esd' sound is crystal clear. Best regards! Nick (2001-07-06 10:26:08) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Fri Jul 6 12:41:34 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Fri, 06 Jul 2001 10:41:34 +0000 (:) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <200107060342.FAA47710@thot.banki.hu> Message-ID: Hi, Arpi! On 2001-07-06 05:42:42 you wrote: >Just made 0.18pre4 public. > >News: > >- new switch to workaroudn window manager bugs: -fsmod > (try n value 0-7) > >- included libavcodec from Gerard Lantau's FFmpeg package > it has native (not Win32 hack) DivX ;-) and OpenDivX codec! > I made some measurements, and DivX seems to be even faster > than DirectShow codec without preprocessing, and only a few > percent slower than ProjectMayo's opendivx decoder. > It uses YV12 pixel format, so old Voodoo users can use it for YUV. > >If you have problems compiling it (it requires nasm, for example) >then simply rename or delete the libavcodec subdirectory and >re-run ./configure >(compiler/environment detection has not been done for libavcodec) > Good news! But it seems that new codec is useless for me. Sample of mplayer output: MPlayer 0.17cvs-010706-09:13(C) 2000-2001 Arpad Gereoffy Reading /root/.mplayer/codecs.conf: 15 audio & 32 video codecs Font /root/.mplayer/font/font.desc loaded successfully! (117 chars) Detected AVI file format! ==> Found video stream: 0 ==> Found audio stream: 1 VIDEO: [DIV3] 640x480 24bpp 23.98 fps 800.2 kbps (97.7 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:640x480 fps:23.98 ftime:=0.0417 Found audio codec: [mp3] drv:1 (MPEG layer-2, layer-3) dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer mp3lib: Processor ID: 631 mp3lib: Using AMD 3dnow-dsp(k7)! optimized decore. AUDIO: srate=48000 chans=2 bps=2 sfmt=0x10 ratio: 12000->192000 Found video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) Loading DLL: /usr/lib/win32/divx_c32.ax OK Using DirectShow codec: divx_c32.ax DShow: using YUY2 colorspace DivX setting result = 0 VO: [null] 640x480 => 640x480 Packed YUY2 VO: Description: Null video output VO: Author: Aaron Holtzman AO: [sdl] 48000Hz Stereo Signed 16-bit (Little-Endian) AO: Description: SDLlib audio output AO: Author: Felix Buenemann SDL: Samplerate: 48000Hz Channels: Stereo Format Signed 16-bit (Little-Endian) Initial frame delay A: 1 V: 0 AVI Initial frame delay: 0.042 Start playing... Initial PTS delay: -0.375 sec (calculated: -0.292) Is new codec in the same state as odivx or problems in my Videocard? Altrough I used -vo null for this sample. Best regards! Nick (2001-07-06 10:36:59) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 6 09:25:16 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Fri, 6 Jul 2001 09:25:16 +0200 Subject: [Mplayer-users] wrong scaling In-Reply-To: <200107052224.f65MOeV19127@panther.unisys.com.br> References: <200107040326.f643Ql416317@panther.unisys.com.br> <200107040353.f643rg427296@panther.unisys.com.br> <63647881.20010704074523@gmx.de> <200107052224.f65MOeV19127@panther.unisys.com.br> Message-ID: <1652221484.20010706092516@gmx.de> Hello Rodolfo, Friday, July 06, 2001, 12:25:00 AM, you wrote: RB> On Wed, 4 Jul 2001, Felix B?nemann wrote: >> Please tell me what screen resolution you are running (ie. >> 1280x1024). RB> does it matter? RB> anyway, it's 1024x768 on my machine. hmm strange, I'll check. -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 6 09:29:17 2001 From: atmosfear at users.sourceforge.net (=?koi8-r?B?RmVsaXggQthuZW1hbm4=?=) Date: Fri, 6 Jul 2001 09:29:17 +0200 Subject: [Mplayer-users] MPlayer's speed! In-Reply-To: References: Message-ID: <1112462350.20010706092917@gmx.de> Hello Nick, Friday, July 06, 2001, 12:36:51 PM, you wrote: NK> Hi, Arpi! NK> On 2001-07-06 00:28:36 you wrote: >>so here comes my notes: >> >>Found audio codec: [mp3] drv:1 (MPEG layer-2, layer-3) >>Initializing audio codec... >>dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer >>mp3lib: Processor ID: 631 >>mp3lib: Using AMD 3dnow-dsp(k7)! optimized decore. >>DEMUX_AVI: Read 372 data bytes from packet 62773130 >>DEMUX: Append packet to d_audio, len=372 pts=0.000 pos=2 [packs: A=1 V=0] >>DEMUX_AVI: Read 372 data bytes from packet 62773130 >>DEMUX: Append packet to d_audio, len=372 pts=0.000 pos=4 [packs: A=1 V=0] >>... >>(here it reads the _whole_ audio stream from the file) >>... >>start playing... >>but no audio stream (it's at EOF) >> >>So it seems to be a bug in mp3lib, or the audio steram of the file. >>Do you have this problem with other files too, or only with this? >>You should check/debug why mp3lib reads the whole stream at initialization >>(it can't find/sync mp3 header?). Maybe it isn't mp3 ? >> >>Hmm. just noticed at the header: >>======= WAVE Format ======= >>Format Tag: 353 (0x161) >> >>0x161 is id of divx audio, not mp3! but why mp3lib is called then? >> >>maybe you have afm=1 in the config file? (it forces using mp3lib >>for audio decoding). or do you have bad codecs.conf... >> NK> I'm sorry! You are perfectly right! I had commented out all audio codecs NK> excpet native - mp3 and ac3 - for testing purposes only, because before NK> mplayer called l3codec.dll for mp3 stream but now it seems that mplayer NK> uses native mp3lib codec. Well after updating codecs.conf I've got realtime NK> playback for this movie but mplayer says: NK> Audio: no sound NK> Why? This movie has sound stream - I know it. NK> All other avis (which have mp3 stream) is being played with sound. NK> May be it would be better -v -v again? NK> And last observation: NK> when I tried following options of config: NK> ao=sdl # To specify default audio driver (see -ao help for NK> # list) NK> ao = sdl:esd # use SDL audio driver by default NK> # use "ao = sdl:esd" to use SDL's ESD driver NK> I've got very distorted sound on output from my SB16. NK> (basses were very weak but highest frequencies were top loud NK> and distorted). NK> Is it a bug or is it a feature? hmm was it 44kHz or 48kHz? maybe your SB16 doesn't support 48kHz, not sure bout that. NK> After commenting out 'ao = sdl:esd' sound is crystal clear. NK> Best regards! Nick (2001-07-06 10:26:08) -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 6 09:31:28 2001 From: atmosfear at users.sourceforge.net (=?koi8-r?B?RmVsaXggQthuZW1hbm4=?=) Date: Fri, 6 Jul 2001 09:31:28 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: References: Message-ID: <852593439.20010706093128@gmx.de> Hello Nick, Friday, July 06, 2001, 12:41:34 PM, you wrote: NK> Hi, Arpi! NK> On 2001-07-06 05:42:42 you wrote: >>Just made 0.18pre4 public. >> >>News: >> >>- new switch to workaroudn window manager bugs: -fsmod >> (try n value 0-7) >> >>- included libavcodec from Gerard Lantau's FFmpeg package >> it has native (not Win32 hack) DivX ;-) and OpenDivX codec! >> I made some measurements, and DivX seems to be even faster >> than DirectShow codec without preprocessing, and only a few >> percent slower than ProjectMayo's opendivx decoder. >> It uses YV12 pixel format, so old Voodoo users can use it for YUV. >> >>If you have problems compiling it (it requires nasm, for example) >>then simply rename or delete the libavcodec subdirectory and >>re-run ./configure >>(compiler/environment detection has not been done for libavcodec) >> NK> Good news! But it seems that new codec is useless for me. NK> Sample of mplayer output: NK> MPlayer 0.17cvs-010706-09:13(C) 2000-2001 Arpad Gereoffy NK> Reading /root/.mplayer/codecs.conf: 15 audio & 32 video codecs NK> Font /root/.mplayer/font/font.desc loaded successfully! (117 chars) NK> Detected AVI file format! ==>> Found video stream: 0 ==>> Found audio stream: 1 NK> VIDEO: [DIV3] 640x480 24bpp 23.98 fps 800.2 kbps (97.7 kbyte/s) NK> [V] filefmt:3 fourcc:0x33564944 size:640x480 fps:23.98 ftime:=0.0417 NK> Found audio codec: [mp3] drv:1 (MPEG layer-2, layer-3) NK> dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer NK> mp3lib: Processor ID: 631 NK> mp3lib: Using AMD 3dnow-dsp(k7)! optimized decore. NK> AUDIO: srate=48000 chans=2 bps=2 sfmt=0x10 ratio: 12000->192000 NK> Found video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) NK> Loading DLL: /usr/lib/win32/divx_c32.ax OK NK> Using DirectShow codec: divx_c32.ax ^^^^^^^^^ That's divx direct show codec, not ffmpegs one, change your codecs conf (ie. uncomment divxds andf vfw or put ffmpeg one first in list (maybe you didn't update codecs.conf at all?). NK> Is new codec in the same state as odivx or problems in my Videocard? NK> Altrough I used -vo null for this sample. NK> Best regards! Nick (2001-07-06 10:36:59) -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Fri Jul 6 09:41:54 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Fri, 6 Jul 2001 09:41:54 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: ; from nickols_k@mail.ru on Fri, Jul 06, 2001 at 10:41:34AM +0000 References: <200107060342.FAA47710@thot.banki.hu> Message-ID: <20010706094154.A3317@woodstock.localdomain> It's the Question that drives us, Nick Kurshev : > Good news! But it seems that new codec is useless for me. Are you sure? > Found video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) ^^^^^ Should give some clue. > Loading DLL: /usr/lib/win32/divx_c32.ax OK > Using DirectShow codec: divx_c32.ax These too. Seems you like to forget about codecs.conf . -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From arpi at thot.banki.hu Fri Jul 6 09:57:29 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 6 Jul 2001 09:57:29 +0200 (CEST) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: Message-ID: <200107060757.JAA13776@thot.banki.hu> Hi, > Found video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) > Loading DLL: /usr/lib/win32/divx_c32.ax OK ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ this is the old codec.... swap ff* and ds* codecs in teh codecs.conf, allow mplayer to find ff* ones first... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Fri Jul 6 14:05:35 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Fri, 06 Jul 2001 12:05:35 +0000 (:) Subject: [Mplayer-users] MPlayer's speed! In-Reply-To: <1112462350.20010706092917@gmx.de> Message-ID: Hi, Felix B?nemann! On 2001-07-06 09:29:17 you wrote: >NK> And last observation: >NK> when I tried following options of config: >NK> ao=sdl # To specify default audio driver (see -ao help for >NK> # list) >NK> ao = sdl:esd # use SDL audio driver by default >NK> # use "ao = sdl:esd" to use SDL's ESD driver > >NK> I've got very distorted sound on output from my SB16. >NK> (basses were very weak but highest frequencies were top loud >NK> and distorted). >NK> Is it a bug or is it a feature? >hmm was it 44kHz or 48kHz? maybe your SB16 doesn't support 48kHz, not >sure bout that. > >NK> After commenting out 'ao = sdl:esd' sound is crystal clear. Yes - my SB16 doesn't support 48kHz, but other ao drivers doesn't cuase any problem for me! Best regards! Nick (2001-07-06 12:04:23) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Fri Jul 6 14:11:53 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Fri, 06 Jul 2001 12:11:53 +0000 (:) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) Message-ID: Hi, Gabucino! On 2001-07-06 09:41:54 you wrote: >It's the Question that drives us, Nick Kurshev : >> Good news! But it seems that new codec is useless for me. >Are you sure? > > >> Found video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) > ^^^^^ >Should give some clue. > > >> Loading DLL: /usr/lib/win32/divx_c32.ax OK >> Using DirectShow codec: divx_c32.ax >These too. > >Seems you like to forget about codecs.conf . > I've updated codec.conf from just synced CVS tree, btw! There are: ; Default codecs config file. It replaces the old codecs.c file! ;============================================================================= ; VIDEO CODECS ;============================================================================= ; =============== Win32/libmpeg2/ProjectMayo MPEG CODECS ===================== videocodec u263 info "UB Video H.263+ Decoder" comment "added by Juanjo" status working fourcc U263 driver dshow dll "ubv263d+.ax" guid 0x00af1181, 0x6ebb, 0x11d4, 0x9d, 0x5a, 0x00, 0x50, 0x04, 0x79, 0x6c, 0xc0 ; out I420 flip ; out YVYU flip,noflip ; out YV12 flip ; out UYVY flip,noflip ; out YUY2 flip out BGR24 flip videocodec divxds info "DivX ;-) (MS MPEG-4 v3)" comment "with postprocessing" status working fourcc MP43,mp43 div3 ; fourcc mapping to div3 fourcc DIV5,div5 div3 fourcc DIV6,div6 div4 fourcc DIV3,div3,DIV4,div4 driver dshow dll "divx_c32.ax" guid 0x82CCd3E0, 0xF71A, 0x11D0, 0x9f, 0xe5, 0x00, 0x60, 0x97, 0x78, 0xaa, 0xaa ; out YV12 out YUY2 out BGR32,BGR24,BGR16,BGR15 videocodec mpeg12 info "MPEG 1 or 2" comment "with postprocessing" status working format 0x10000001 driver libmpeg2 dll "libmpeg2" out YV12 videocodec mpeg4 info "Microsoft MPEG-4 v1/v2" status working ; comment "No postprocessing" fourcc MPG4,mpg4 fourcc MP42,mp42 fourcc DIV2 mp42 driver vfw dll "mpg4c32.dll" out YUY2 yuvhack out BGR32,BGR24,BGR15 videocodec mpeg4ds info "Microsoft MPEG-4 v1/v2" status working ; comment "with postprocessing" fourcc DIV2,div2 mp42 fourcc MPG4,mpg4 fourcc MP42,mp42 driver dshow dll "mpg4ds32.ax" guid 0x82CCD3E0, 0xF71A, 0x11D0, 0x9F, 0xE5, 0x00, 0x60, 0x97, 0x78, 0xEA, 0x66 out YUY2 out BGR32,BGR24,BGR16,BGR15 videocodec divx info "DivX ;-) (MS MPEG-4 v3)" status working fourcc MP43,mp43 div3 ; M$ MPEG4 v3 (fourcc mapping to div3) fourcc DIV5,div5 div3 ; DivX 3.20 fourcc DIV6,div6 div4 ; -||- fourcc DIV3,div3,DIV4,div4 driver vfw dll "divxc32.dll" out YUY2 yuvhack out BGR32,BGR24,BGR15 videocodec odivx info "OpenDivX (MPEG-4 v2)" comment "with postprocessing" status working fourcc DIVX,divx fourcc DIV1,div1 divx fourcc MP4S,mp4s ; ISO MPEG-4 Video V1 format 0x4 driver odivx dll "opendivx decore" out YV12 ; =============== FFMPEG MPEG CODECS ========================= videocodec ffdivx info "FFmpeg DivX ;-) (MS MPEG-4 v3)" status working fourcc MP43,mp43 div3 ; M$ MPEG4 v3 (fourcc mapping to div3) fourcc DIV5,div5 div3 ; DivX 3.20 fourcc DIV6,div6 div4 ; -||- fourcc DIV3,div3,DIV4,div4 driver ffmpeg dll msmpeg4 out YV12 videocodec ffodivx info "FFmpeg OpenDivX" status working fourcc DIVX,divx fourcc DIV1,div1 divx fourcc MP4S,mp4s ; ISO MPEG-4 Video V1 format 0x4 driver ffmpeg dll opendivx out YV12 I.e. divxds there is placed first! But ffmpegs codecs were introduced only in today version of mplayer's CVS, isn't? They are introduced only for YV12 but my mplayer's output contain YUY2! >DShow: using YUY2 colorspace Second: Playing with string's commenting out in codec.conf already caused a problem with movie playback. So I have pure codecs.conf Best regards! Nick (2001-07-06 12:02:29) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Fri Jul 6 10:30:15 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Fri, 6 Jul 2001 10:30:15 +0200 Subject: [Mplayer-users] New ffmpeg code doesn't compile on FreeBSD Message-ID: <20010706103015.A94764@hoth.amu.edu.pl> Fri Jul 6 08:28:59 UTC 2001 FreeBSD 4.3 (tested on 2 machines): gmake[1]: Wchodz? katalog `/root/src/main/libavcodec' gcc -O4 -march=i686 -mcpu=i686 -pipe -ffast-math -fomit-frame-pointer -D_THREAD_SAFE -Wall -DCONFIG_MMX -DCONFIG_SSE -c -o common.o common.c In file included from common.c:22: /usr/include/netinet/in.h:233: syntax error before `in_addr_t' /usr/include/netinet/in.h:285: syntax error before `u_char' In file included from /usr/include/netinet/in.h:475, from common.c:22: /usr/include/netinet6/in6.h:122: syntax error before `u_int8_t' /usr/include/netinet6/in6.h:144: syntax error before `u_int8_t' /usr/include/netinet6/in6.h:149: syntax error before `u_int32_t' /usr/include/netinet6/in6.h:617: syntax error before `*' /usr/include/netinet6/in6.h:619: syntax error before `*' /usr/include/netinet6/in6.h:619: warning: data definition has no type or storage class /usr/include/netinet6/in6.h:620: syntax error before `u_int8_t' /usr/include/netinet6/in6.h:621: syntax error before `u_int8_t' /usr/include/netinet6/in6.h:636: syntax error before `u_int8_t' /usr/include/netinet6/in6.h:641: syntax error before `u_int8_t' /usr/include/netinet6/in6.h:643: syntax error before `u_int8_t' common.c: In function `put_bits': common.c:77: warning: implicit declaration of function `htonl' gmake[1]: *** [common.o] B??d 1 gmake[1]: Opuszczam katalog `/root/src/main/libavcodec' gmake: *** [libavcodec/libavcodec.a] B??d 2 -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 6 10:46:01 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 6 Jul 2001 10:46:01 +0200 (CEST) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: Message-ID: <200107060846.KAA47868@thot.banki.hu> Hi, > I.e. divxds there is placed first! But ffmpegs codecs were introduced only in > today version of mplayer's CVS, isn't? Yes. > They are introduced only for YV12 but my mplayer's output contain YUY2! > >DShow: using YUY2 colorspace ^^^^^^ argh. can't you see? it uses directshow codec with yuy2. swap ffmpeg and dshow codecs at codecs.conf, ffmpeg ones must be first if you want to use them. > Second: Playing with string's commenting out in codec.conf already caused > a problem with movie playback. So I have pure codecs.conf commenting isn't a good idea... (except if you comment out non-working ones) but you can swap order of them, so default codec selection will change. I'm planning an -ac / -vc option, similar to -ao/-vo but for codec selection. Anyone interested in coding it? (i'll be away a week from today) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Fri Jul 6 14:50:36 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Fri, 06 Jul 2001 12:50:36 +0000 (:) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) Message-ID: Hi, Arpi! On 2001-07-06 09:57:29 you wrote: >Hi, > >> Found video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) >> Loading DLL: /usr/lib/win32/divx_c32.ax OK >^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ >this is the old codec.... > >swap ff* and ds* codecs in teh codecs.conf, allow mplayer to find >ff* ones first... O'k! I've done it. Now mplayer calls ffmpeg codecs instead of windows codecs. But maybe it would be better to remove these records from codecs.conf in CVS and codecs from win32codec.zip? I've found there following codecs: ; Default codecs config file. It replaces the old codecs.c file! ;============================================================================= ; VIDEO CODECS ;============================================================================= ; =============== Win32/libmpeg2/ProjectMayo MPEG CODECS ===================== videocodec u263 videocodec divxds videocodec mpeg12 videocodec mpeg4 videocodec mpeg4ds videocodec divx videocodec odivx ; =============== FFMPEG MPEG CODECS ========================= videocodec ffdivx videocodec ffodivx videocodec ffmpeg12 ... audiocodec mp3acm comment "Optimized to Intel MMX/SSE, conflicts with security kernel patches" dll "l3codeca.acm" Now it's clear - why mplayer calls win32 codecs instead of native. Btw, I've done some "reverse engineer" analysis and didn't find any MMX or SSE opcodes in l3codeca.acm. At first - these DLL is never called by mplayer. Second - why this record is present in mplayer conf Third - I don't know - may be you have l3codeca.acm which is optimized for MMX and SSE but my copy doesn't contain such optimization. Best regards! Nick (2001-07-06 12:36:43) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 6 10:49:37 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 6 Jul 2001 10:49:37 +0200 (CEST) Subject: [Mplayer-users] New ffmpeg code doesn't compile on FreeBSD In-Reply-To: <20010706103015.A94764@hoth.amu.edu.pl> Message-ID: <200107060849.KAA42888@thot.banki.hu> Hi, > > Fri Jul 6 08:28:59 UTC 2001 yes, it wasn't ported to *BSD yet. simply remove the libavcodec dir and re-run ./configure A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Fri Jul 6 10:56:17 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Fri, 6 Jul 2001 10:56:17 +0200 Subject: [Mplayer-users] New ffmpeg code doesn't compile on FreeBSD (short patch) In-Reply-To: <20010706103015.A94764@hoth.amu.edu.pl> References: <20010706103015.A94764@hoth.amu.edu.pl> Message-ID: <20010706105617.B94764@hoth.amu.edu.pl> On Fri, Jul 06, 2001 at 10:30:15AM +0200, Bohdan Horst wrote: > > Fri Jul 6 08:28:59 UTC 2001 > FreeBSD 4.3 (tested on 2 machines): > > gmake[1]: Wchodz? katalog `/root/src/main/libavcodec' > gcc -O4 -march=i686 -mcpu=i686 -pipe -ffast-math -fomit-frame-pointer -D_THREAD_SAFE -Wall > -DCONFIG_MMX -DCONFIG_SSE -c -o common.o common.c [...] compile and work on FreeBSD after: *** common.c Fri Jul 6 05:32:40 2001 --- libavcodec/common.c Fri Jul 6 10:31:59 2001 *************** *** 19,25 **** #include #include #include ! #include #include #include "common.h" --- 19,25 ---- #include #include #include ! /*#include */ #include #include "common.h" and *** dsputil.h Fri Jul 6 05:32:40 2001 --- libavcodec/dsputil.h Fri Jul 6 10:34:40 2001 *************** *** 2,8 **** #define DSPUTIL_H #include "common.h" ! #include /* dct code */ typedef short DCTELEM; --- 2,8 ---- #define DSPUTIL_H #include "common.h" ! /*#include */ /* dct code */ typedef short DCTELEM; Speed tests (total time with -nosound): P3 750 + TNT2 + X11: ffmpeg 1.08 times slower than dll AMD K6-2 333 + C&T + Xv: ffmpeg 1.45 times slower than dll :( Best regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 6 10:56:52 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 6 Jul 2001 10:56:52 +0200 (CEST) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: Message-ID: <200107060856.KAA42772@thot.banki.hu> Hi, > >> Loading DLL: /usr/lib/win32/divx_c32.ax OK > >^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > >this is the old codec.... > > > >swap ff* and ds* codecs in teh codecs.conf, allow mplayer to find > >ff* ones first... > O'k! I've done it. Now mplayer calls ffmpeg codecs instead of windows codecs. > But maybe it would be better to remove these records from codecs.conf in CVS > and codecs from win32codec.zip? Bad idea. 1, native codecs are usual slow (at least before you optimize them :)) 2, ffmpeg code is very experimental, and maybe buggy yet. and it doesn't support postprocesisng yet. > audiocodec mp3acm > comment "Optimized to Intel MMX/SSE, conflicts with security kernel patches" > dll "l3codeca.acm" > > Now it's clear - why mplayer calls win32 codecs instead of native. Because they are faster. Yes, for mp3lib you're right, but AFAIK for mp3 the mp3lib codec is already the first. > Btw, I've done some "reverse engineer" analysis and didn't find any MMX or SSE opcodes > in l3codeca.acm. Do it again. I've found many using your great Biew ;) > At first - these DLL is never called by mplayer. Never say never except if you are sure ever. users has the ability to change order of codecs, or simply force using a single codec with -afm and -nodshow options. and if they changed order, they will be used. > Second - why this record is present in mplayer conf which record? > Third - I don't know - may be you have l3codeca.acm which is optimized for MMX and SSE > but my copy doesn't contain such optimization. hmm. check the codec pack from the ftp. mine is from the original divx3.11 codec .zip (it's the commercial one, the "demo" version in win98 is maybe unoptimized) but i'll check again for sse code. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 6 11:01:39 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 6 Jul 2001 11:01:39 +0200 (CEST) Subject: [Mplayer-users] New ffmpeg code doesn't compile on FreeBSD (short patch)Fri Jul 6 10:59:07 2001 In-Reply-To: <20010706105617.B94764@hoth.amu.edu.pl> Message-ID: <200107060901.LAA35400@thot.banki.hu> Hi, > Speed tests (total time with -nosound): > P3 750 + TNT2 + X11: ffmpeg 1.08 times slower than dll > AMD K6-2 333 + C&T + Xv: ffmpeg 1.45 times slower than dll :( Hmm. Please show us -benchmark results, not only factors. Btw it should be slower than dll yet, because it's 100% unoptimized C code. We'll optimize it later... Btw as it uses YV12 instead of YUY2, the overall performance can be better for ffmpeg code, because it uses less memory and PCI/AGP bandwith. (at least for my celeron2-600 at 900+G400MAX, it's 10% faster) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Fri Jul 6 11:38:35 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Fri, 6 Jul 2001 11:38:35 +0200 Subject: [Mplayer-users] New ffmpeg code doesn't compile on FreeBSD (short patch)Fri Jul 6 10:59:07 2001 In-Reply-To: <200107060901.LAA35400@thot.banki.hu> References: <20010706105617.B94764@hoth.amu.edu.pl> <200107060901.LAA35400@thot.banki.hu> Message-ID: <20010706113834.A96291@hoth.amu.edu.pl> On Fri, Jul 06, 2001 at 11:01:39AM +0200, Arpi wrote: > Hi, > > > Speed tests (total time with -nosound): > > P3 750 + TNT2 + X11: ffmpeg 1.08 times slower than dll > > AMD K6-2 333 + C&T + Xv: ffmpeg 1.45 times slower than dll :( > Hmm. Please show us -benchmark results, not only factors. > P3 750 + TNT2 hannibal trailer: VIDEO: [DIV3] 480x260 24bpp 24.00 fps 185.7 kbps (22.7 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:480x260 fps:24.00 ftime:=0.0417 Found video codec: [ffdivx] drv:5 (FFmpeg DivX ;-) (MS MPEG-4 v3)) vo: X11 color mask: FFFF (R:F800 G:7E0 B:1F) vo: X11 running at 1024x768 depth: 16 (":0.0" => local display) libavcodec.size: 480 x 260 VO: [x11] 480x260 => 480x260 Planar YV12 VO: Description: X11 ( XImage/Shm ) VO: Author: Aaron Holtzman Sharing memory. Using MMX for colorspace transform Audio: no sound BENCHMARKs: V: 14.485s VO: 5.014s A: 0.000s Sys: 8.251s = 27.750s BENCHMARK%: V: 52.1993% VO: 18.0680% A: 0.0000% Sys: 29.7327% = 100.0000% BENCHMARKs: V: 14.445s VO: 5.092s A: 0.000s Sys: 8.267s = 27.803s BENCHMARK%: V: 51.9530% VO: 18.3141% A: 0.0000% Sys: 29.7329% = 100.0000% BENCHMARKs: V: 14.534s VO: 5.026s A: 0.000s Sys: 8.135s = 27.695s BENCHMARK%: V: 52.4799% VO: 18.1463% A: 0.0000% Sys: 29.3738% = 100.0000% VIDEO: [DIV3] 480x260 24bpp 24.00 fps 185.7 kbps (22.7 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:480x260 fps:24.00 ftime:=0.0417 Found video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) vo: X11 color mask: FFFF (R:F800 G:7E0 B:1F) vo: X11 running at 1024x768 depth: 16 (":0.0" => local display) Set_LDT Loading DLL: /usr/lib/win32/divx_c32.ax OK Using DirectShow codec: divx_c32.ax DivX setting result = 0 VO: [x11] 480x260 => 480x260 BGR 16-bit VO: Description: X11 ( XImage/Shm ) VO: Author: Aaron Holtzman Sharing memory. Audio: no sound BENCHMARKs: V: 13.367s VO: 3.871s A: 0.000s Sys: 8.445s = 25.683s BENCHMARK%: V: 52.0451% VO: 15.0730% A: 0.0000% Sys: 32.8819% = 100.0000% BENCHMARKs: V: 13.409s VO: 3.920s A: 0.000s Sys: 8.467s = 25.796s BENCHMARK%: V: 51.9798% VO: 15.1972% A: 0.0000% Sys: 32.8230% = 100.0000% BENCHMARKs: V: 13.325s VO: 3.916s A: 0.000s Sys: 8.529s = 25.770s BENCHMARK%: V: 51.7066% VO: 15.1965% A: 0.0000% Sys: 33.0969% = 100.0000% wing commander trailer: VIDEO: [DIV3] 640x360 24bpp 24.00 fps 846.9 kbps (103.4 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:640x360 fps:24.00 ftime:=0.0417 Found video codec: [ffdivx] drv:5 (FFmpeg DivX ;-) (MS MPEG-4 v3)) vo: X11 color mask: FFFF (R:F800 G:7E0 B:1F) vo: X11 running at 1024x768 depth: 16 (":0.0" => local display) libavcodec.size: 640 x 360 VO: [x11] 640x360 => 640x360 Planar YV12 VO: Description: X11 ( XImage/Shm ) VO: Author: Aaron Holtzman Sharing memory. Using MMX for colorspace transform Audio: no sound BENCHMARKs: V: 15.248s VO: 4.809s A: 0.000s Sys: 5.536s = 25.593s BENCHMARK%: V: 59.5782% VO: 18.7909% A: 0.0000% Sys: 21.6309% = 100.0000% BENCHMARKs: V: 15.257s VO: 4.816s A: 0.000s Sys: 5.524s = 25.598s BENCHMARK%: V: 59.6048% VO: 18.8140% A: 0.0000% Sys: 21.5812% = 100.0000% BENCHMARKs: V: 15.274s VO: 4.793s A: 0.000s Sys: 5.528s = 25.595s BENCHMARK%: V: 59.6778% VO: 18.7256% A: 0.0000% Sys: 21.5967% = 100.0000% VIDEO: [DIV3] 640x360 24bpp 24.00 fps 846.9 kbps (103.4 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:640x360 fps:24.00 ftime:=0.0417 Found video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) vo: X11 color mask: FFFF (R:F800 G:7E0 B:1F) vo: X11 running at 1024x768 depth: 16 (":0.0" => local display) Set_LDT Loading DLL: /usr/lib/win32/divx_c32.ax OK Using DirectShow codec: divx_c32.ax DivX setting result = 0 VO: [x11] 640x360 => 640x360 BGR 16-bit VO: Description: X11 ( XImage/Shm ) VO: Author: Aaron Holtzman Sharing memory. Audio: no sound BENCHMARKs: V: 17.884s VO: 3.240s A: 0.000s Sys: 5.613s = 26.737s BENCHMARK%: V: 66.8881% VO: 12.1193% A: 0.0000% Sys: 20.9927% = 100.0000% BENCHMARKs: V: 17.883s VO: 2.868s A: 0.000s Sys: 5.602s = 26.353s BENCHMARK%: V: 67.8600% VO: 10.8833% A: 0.0000% Sys: 21.2567% = 100.0000% BENCHMARKs: V: 17.880s VO: 2.859s A: 0.000s Sys: 5.609s = 26.348s BENCHMARK%: V: 67.8599% VO: 10.8522% A: 0.0000% Sys: 21.2879% = 100.0000% Matrix trailer: VIDEO: [DIV3] 640x480 24bpp 23.98 fps 960.6 kbps (117.3 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:640x480 fps:23.98 ftime:=0.0417 Found video codec: [ffdivx] drv:5 (FFmpeg DivX ;-) (MS MPEG-4 v3)) vo: X11 color mask: FFFF (R:F800 G:7E0 B:1F) vo: X11 running at 1024x768 depth: 16 (":0.0" => local display) libavcodec.size: 640 x 480 VO: [x11] 640x480 => 640x480 Planar YV12 VO: Description: X11 ( XImage/Shm ) VO: Author: Aaron Holtzman Sharing memory. Using MMX for colorspace transform Audio: no sound BENCHMARKs: V: 45.660s VO: 16.438s A: 0.000s Sys: 17.763s = 79.861s BENCHMARK%: V: 57.1747% VO: 20.5831% A: 0.0000% Sys: 22.2422% = 100.0000% BENCHMARKs: V: 45.525s VO: 16.432s A: 0.000s Sys: 17.806s = 79.763s BENCHMARK%: V: 57.0754% VO: 20.6008% A: 0.0000% Sys: 22.3237% = 100.0000% BENCHMARKs: V: 45.525s VO: 16.432s A: 0.000s Sys: 17.806s = 79.763s BENCHMARK%: V: 57.0754% VO: 20.6008% A: 0.0000% Sys: 22.3237% = 100.0000% VIDEO: [DIV3] 640x480 24bpp 23.98 fps 960.6 kbps (117.3 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:640x480 fps:23.98 ftime:=0.0417 Found video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) vo: X11 color mask: FFFF (R:F800 G:7E0 B:1F) vo: X11 running at 1024x768 depth: 16 (":0.0" => local display) Set_LDT Loading DLL: /usr/lib/win32/divx_c32.ax OK Using DirectShow codec: divx_c32.ax DivX setting result = 0 VO: [x11] 640x480 => 640x480 BGR 16-bit VO: Description: X11 ( XImage/Shm ) VO: Author: Aaron Holtzman Sharing memory. Audio: no sound BENCHMARKs: V: 41.080s VO: 11.666s A: 0.000s Sys: 18.308s = 71.054s BENCHMARK%: V: 57.8154% VO: 16.4183% A: 0.0000% Sys: 25.7663% = 100.0000% BENCHMARKs: V: 41.086s VO: 11.656s A: 0.000s Sys: 18.286s = 71.028s BENCHMARK%: V: 57.8447% VO: 16.4110% A: 0.0000% Sys: 25.7444% = 100.0000% BENCHMARKs: V: 41.030s VO: 11.646s A: 0.000s Sys: 18.298s = 70.974s BENCHMARK%: V: 57.8102% VO: 16.4090% A: 0.0000% Sys: 25.7808% = 100.0000% Best regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Fri Jul 6 16:56:31 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Fri, 06 Jul 2001 14:56:31 +0000 (:) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <200107060846.KAA47868@thot.banki.hu> Message-ID: Hi, Arpi! On 2001-07-06 10:46:01 you wrote: > >I'm planning an -ac / -vc option, similar to -ao/-vo but for codec >selection. Anyone interested in coding it? (i'll be away a week from today) > IMHO - it's bad idea. I think win32 stuff must die as soon as possible ;) If we have alternative opensource code (btw GPL'ed) - we must prefer native stuff and remove win32 stuff. It can be optimized better that proprietary closed codecs. It required less resources - like wine, dshow and so on. It has the future. Best regards! Nick (2001-07-06 14:50:27) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jp at ulgo.koti.com.pl Fri Jul 6 13:57:42 2001 From: jp at ulgo.koti.com.pl (Jacek =?iso-8859-2?Q?Pop=B3awski?=) Date: Fri, 6 Jul 2001 13:57:42 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <200107060342.FAA47710@thot.banki.hu>; from arpi@thot.banki.hu on Fri, Jul 06, 2001 at 05:42:42AM +0200 References: <200107060342.FAA47710@thot.banki.hu> Message-ID: <20010706135742.A2258@localhost.localdomain> On Fri, Jul 06, 2001 at 05:42:42AM +0200, Arpi wrote: > - included libavcodec from Gerard Lantau's FFmpeg package > it has native (not Win32 hack) DivX ;-) and OpenDivX codec! I compiled it, works really fast am I understand correctly, that this is codec with source? and it means it can be optimized -> much faster? -- Don't care which God you follow Whose promises you swallow Time and again We must meet at the end "Lord of the Last Day" - Ronnie James Dio _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 6 14:44:49 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 6 Jul 2001 14:44:49 +0200 (CEST) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <20010706135742.A2258@localhost.localdomain> Message-ID: <200107061244.OAA32060@thot.banki.hu> Hi, > On Fri, Jul 06, 2001 at 05:42:42AM +0200, Arpi wrote: > > - included libavcodec from Gerard Lantau's FFmpeg package > > it has native (not Win32 hack) DivX ;-) and OpenDivX codec! > > I compiled it, works really fast > > am I understand correctly, that this is codec with source? and it means it can > be optimized -> much faster? yes! it is the first open-source DivX ;-) (a.k.a. MS-Mpeg4) codec. it's unoptimized yet, but in the future we (together with ffmpeg guys) will optimize it. and it has some other advantages oter DLL file: - we can make partial blit -> much better cache usage at display - it supports YV12 pixel format (uses less VGA bandwith -> faster) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Fri Jul 6 14:56:22 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Fri, 6 Jul 2001 14:56:22 +0200 Subject: [Mplayer-users] new ffmpeg code Message-ID: <20010706145621.A3857@hoth.amu.edu.pl> http://download.divx.com/showcase/radius_trailer.avi FreeBSD 4.3 (P3 750 + TNT2) old code: AVI_NI: No audio stream found -> nosound VIDEO: [DIVX] 640x352 16bpp 23.98 fps 1096.4 kbps (133.8 kbyte/s) [V] filefmt:3 fourcc:0x58564944 size:640x352 fps:23.98 ftime:=0.0417 Found video codec: [odivx] drv:3 (OpenDivX (MPEG-4 v2)) Using MMXEXT for IDCT transform VO: [null] 640x352 => 640x352 Planar YV12 VO: Description: Null video output VO: Author: Aaron Holtzman Audio: no sound Start playing... (and playing :) new ffmpeg code: AVI_NI: No audio stream found -> nosound VIDEO: [DIVX] 640x352 16bpp 23.98 fps 1096.4 kbps (133.8 kbyte/s) [V] filefmt:3 fourcc:0x58564944 size:640x352 fps:23.98 ftime:=0.0417 Found video codec: [ffodivx] drv:5 (FFmpeg OpenDivX) libavcodec.size: 640 x 352 VO: [null] 640x352 => 640x352 Planar YV12 VO: Description: Null video output VO: Author: Aaron Holtzman Audio: no sound Start playing... Error while decoding frame! Error while decoding frame! Best regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jp at ulgo.koti.com.pl Fri Jul 6 14:56:13 2001 From: jp at ulgo.koti.com.pl (Jacek =?iso-8859-2?Q?Pop=B3awski?=) Date: Fri, 6 Jul 2001 14:56:13 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <200107061244.OAA32060@thot.banki.hu>; from arpi@thot.banki.hu on Fri, Jul 06, 2001 at 02:44:49PM +0200 References: <20010706135742.A2258@localhost.localdomain> <200107061244.OAA32060@thot.banki.hu> Message-ID: <20010706145613.A13432@localhost.localdomain> On Fri, Jul 06, 2001 at 02:44:49PM +0200, Arpi wrote: > > am I understand correctly, that this is codec with source? and it means it can > > be optimized -> much faster? > > yes! then it's the Great Day for all Linux community! I think you should announce it on avifile mailing list, too ;-) > it's unoptimized yet, it is _fast_ already, I mean I can watch divx with my K6-2 500 I hope I configured it correctly (it shows ffmpeg codec, not directshow) > but in the future we (together with ffmpeg guys) > will optimize it. well... divx on Pentium-100 is coming ;-) > and it has some other advantages oter DLL file: and - again - if I understand correctly - we can compile it with diffrent options, for example march=k6, and with diffrent compilers (when gcc-3.x.y will be fast...) -- Look all around Can't you open your eyes Voices are calling "Master of Insanity" Killing rain falling down from the sky - Ronnie James Dio _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From tibcu at sch.bme.hu Fri Jul 6 17:05:24 2001 From: tibcu at sch.bme.hu (Balazs Tibor) Date: Fri, 6 Jul 2001 17:05:24 +0200 (MEST) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <200107060342.FAA47710@thot.banki.hu> Message-ID: > - included libavcodec from Gerard Lantau's FFmpeg package > it has native (not Win32 hack) DivX ;-) and OpenDivX codec! > I made some measurements, and DivX seems to be even faster > than DirectShow codec without preprocessing, and only a few maybe it's not true for all CPUs at least not for mine: MPlayer 0.17cvs-010706-12:13 CommandLine: '-vo' 'null' '/mnt/frutty/Games/movie/vagyamit.avi' '-nosound' '-osdlevel' '0' '-v' '-frames' '500' '-benchmark' VIDEO: [DIV3] 384x288 24bpp 29.97 fps 1161.7 kbps (141.8 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:384x288 fps:29.97 ftime:=0.0334 Found video codec: [ffdivx] drv:5 (FFmpeg DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 19.402s VO: 0.005s A: 0.000s Sys: 0.081s = 19.488s BENCHMARK%: V: 99.5590% VO: 0.0266% A: 0.0000% Sys: 0.4144% = 100.0000% same version, same options (and after reediting codecs.conf) : Found video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 13.535s VO: 0.005s A: 0.000s Sys: 0.108s = 13.647s BENCHMARK%: V: 99.1751% VO: 0.0345% A: 0.0000% Sys: 0.7904% = 100.0000% and with VfW (-nodshow) : Found video codec: [divx] drv:2 (DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 13.889s VO: 0.005s A: 0.000s Sys: 0.086s = 13.980s BENCHMARK%: V: 99.3531% VO: 0.0352% A: 0.0000% Sys: 0.6118% = 100.0000% I wouldn't say, ff is faster in this case. (P200MMX) Tibcu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From luca at lucarella.com.ar Fri Jul 6 17:44:23 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Fri, 6 Jul 2001 12:44:23 -0300 (ART) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) Can't compile. In-Reply-To: <200107060342.FAA47710@thot.banki.hu> References: <200107060342.FAA47710@thot.banki.hu> Message-ID: <200107061659.MAA31967@burns.luca.2y.net> El Fri, 6 Jul 2001 05:42:42 +0200 (CEST) Arpi escribi?: Hi, I've downlaoded ffmpeg-0.4.3 and copied libavcodec and libav into main mplayer dir. I make the libavcodec and libav and tried to make the mplayer. I'm updated my mplayer sources today from the cvs (codecs.conf has the ffmpeg codecs). First I had this error: gcc -c -O4 -march=i686 -mcpu=i686 -pipe -ffast-math -fomit-frame-pointer -Iloader -Ilibvo -I/usr/local/include -o mplayer.o mplayer.c In file included from libavcodec/avcodec.h:1, from mplayer.c:69: libavcodec/common.h:5: redefinition of `UINT16' loader/wine/windef.h:363: `UINT16' previously declared here libavcodec/common.h:9: redefinition of `INT16' loader/wine/windef.h:362: `INT16' previously declared here mplayer.c: In function `main': mplayer.c:1309: warning: assignment makes pointer from integer without a cast make: *** [mplayer.o] Error 1 I've eddited libavcodec/common.h and deleted the repeatd definitions. Then I have this error: gcc -O4 -march=i686 -mcpu=i686 -pipe -ffast-math -fomit-frame-pointer -Iloader -Ilibvo -I/usr/local/include -o mplayer mplayer.o find_sub.o aviprint.o dll_init.o dec_audio.o aviwrite.o aviheader.o asfheader.o demux_avi.o demux_asf.o demux_mpg.o demuxer.o stream.o codec-cfg.o subreader.o linux/getch2.o linux/timer-lx.o linux/shmem.o xa/xa_gsm.o lirc_mp.o cfgparser.o mixer.o dvdauth.o spudec.o -Lmp3lib -lMP3 -Llibac3 -lac3 -lm -ltermcap -Lloader -lloader -Lloader/DirectShow -lDS_Filter -lstdc++ -Llibavcodec -lavcodec -Llibmpeg2 -lmpeg2 -Lopendivx -ldecore -Llibao2 -lao2 -Llibvo -lvo -L/usr/X11R6/lib -L/usr/local/lib -lGL -lggi -L/usr/lib -lSDL -lpthread -lXxf86dga -lX11 -lXext -lXv -lXxf86vm -lpng -lz -lnsl -Lencore -lencore -lrt -ldl -lpthread mplayer.o: In function `main': mplayer.o(.text+0x275d): undefined reference to `avcodec_find_decoder_by_name'collect2: ld returned 1 exit status make: *** [mplayer] Error 1 Any ideas??? I'm on a Debian GNU/Linux Sid/Duron 800MHz. -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Fri Jul 6 18:16:59 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Fri, 6 Jul 2001 18:16:59 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: ; from tibcu@sch.bme.hu on Fri, Jul 06, 2001 at 05:05:24PM +0200 References: <200107060342.FAA47710@thot.banki.hu> Message-ID: <20010706181659.B2525@woodstock.localdomain> It's the Question that drives us, Balazs Tibor : > maybe it's not true for all CPUs It's not the CPU that matters (it's unoptimized yet), but the videocard. That's why -vo null benchmarking isn't good. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From gabucino at k2.jozsef.kando.hu Fri Jul 6 18:15:59 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Fri, 6 Jul 2001 18:15:59 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) Can't compile. In-Reply-To: <200107061659.MAA31967@burns.luca.2y.net>; from luca@lucarella.com.ar on Fri, Jul 06, 2001 at 12:44:23PM -0300 References: <200107060342.FAA47710@thot.banki.hu> <200107061659.MAA31967@burns.luca.2y.net> Message-ID: <20010706181559.A2525@woodstock.localdomain> It's the Question that drives us, Leandro Lucarella : > Hi, I've downlaoded ffmpeg-0.4.3 and copied libavcodec and libav Ehh. And why? 0.18pre4 contains libavcodec by default !! (see the subject of the mail!) -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From atmosfear at users.sourceforge.net Fri Jul 6 18:18:01 2001 From: atmosfear at users.sourceforge.net (=?koi8-r?B?RmVsaXggQthuZW1hbm4=?=) Date: Fri, 6 Jul 2001 18:18:01 +0200 Subject: [Mplayer-users] MPlayer's speed! In-Reply-To: References: Message-ID: <8634186597.20010706181801@gmx.de> Hello Nick, Friday, July 06, 2001, 2:05:35 PM, you wrote: NK> Hi, Felix B?nemann! NK> On 2001-07-06 09:29:17 you wrote: >>NK> And last observation: >>NK> when I tried following options of config: >>NK> ao=sdl # To specify default audio driver (see -ao help for >>NK> # list) >>NK> ao = sdl:esd # use SDL audio driver by default >>NK> # use "ao = sdl:esd" to use SDL's ESD driver >> >>NK> I've got very distorted sound on output from my SB16. >>NK> (basses were very weak but highest frequencies were top loud >>NK> and distorted). >>NK> Is it a bug or is it a feature? >>hmm was it 44kHz or 48kHz? maybe your SB16 doesn't support 48kHz, not >>sure bout that. >> >>NK> After commenting out 'ao = sdl:esd' sound is crystal clear. NK> Yes - my SB16 doesn't support 48kHz, but other ao drivers doesn't cuase any problem for me! but sdl tries to emulate 48kHz, and that sux. NK> Best regards! Nick (2001-07-06 12:04:23) -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From tibcu at sch.bme.hu Fri Jul 6 18:34:05 2001 From: tibcu at sch.bme.hu (Balazs Tibor) Date: Fri, 6 Jul 2001 18:34:05 +0200 (MEST) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: Message-ID: http://mp.dev.hu/MPlayer/DOCS/codecs.html is not up-to-date there is no info about MMX-optimized mp3lib :-) or does that link refer to releases? no, then it should contain info about libavcodec and some comments, that it's experimental (or unoptimized) Tibcu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From luca at lucarella.com.ar Fri Jul 6 18:31:45 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Fri, 6 Jul 2001 13:31:45 -0300 (ART) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) Can't compile. In-Reply-To: <20010706181559.A2525@woodstock.localdomain> References: <200107060342.FAA47710@thot.banki.hu> <200107061659.MAA31967@burns.luca.2y.net> <20010706181559.A2525@woodstock.localdomain> Message-ID: <200107061746.NAA32083@burns.luca.2y.net> El Fri, 6 Jul 2001 18:15:59 +0200 Gabucino escribi?: G> It's the Question that drives us, Leandro Lucarella : G> > Hi, I've downlaoded ffmpeg-0.4.3 and copied libavcodec and libav G> Ehh. And why? 0.18pre4 contains libavcodec by default !! (see the subject G> of the mail!) I've downloaded from cvs and there's no libavcodec dir... what should I download? http://mp.dev.hu/MPlayer/releases/MPlayer-0.18pre.tgz ? I'm sory about my lammerness... ;) -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 6 18:39:05 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Fri, 6 Jul 2001 18:39:05 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) Can't compile. In-Reply-To: <200107061746.NAA32083@burns.luca.2y.net> References: <200107060342.FAA47710@thot.banki.hu> <200107061659.MAA31967@burns.luca.2y.net> <20010706181559.A2525@woodstock.localdomain> <200107061746.NAA32083@burns.luca.2y.net> Message-ID: <18335450595.20010706183905@gmx.de> Hello Leandro, Friday, July 06, 2001, 6:31:45 PM, you wrote: LL> El Fri, 6 Jul 2001 18:15:59 +0200 Gabucino escribi?: G>> It's the Question that drives us, Leandro Lucarella : G>> > Hi, I've downlaoded ffmpeg-0.4.3 and copied libavcodec and libav G>> Ehh. And why? 0.18pre4 contains libavcodec by default !! (see the subject G>> of the mail!) LL> I've downloaded from cvs and there's no libavcodec dir... what should I LL> download? LL> http://mp.dev.hu/MPlayer/releases/MPlayer-0.18pre.tgz ? LL> I'm sory about my lammerness... ;) how about ftp://mp.dev.hu/MPlayer/releases/MPlayer-0.18pre4.tgz ? LL> -- LL> LUCA - Leandro Lucarella LL> ------------------------ LL> luca at lucarella.com.ar LL> http://www.luca.2y.net LL> LICQ UIN: 2847576 LL> ------------------------ LL> Usando Debian GNU/Linux -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 6 18:42:00 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 6 Jul 2001 18:42:00 +0200 (CEST) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) Can't compilFri Jul 6 18:40:34 2001 In-Reply-To: <200107061659.MAA31967@burns.luca.2y.net> Message-ID: <200107061642.SAA24610@thot.banki.hu> Hi, > Hi, I've downlaoded ffmpeg-0.4.3 and copied libavcodec and libav into main > mplayer dir. I make the libavcodec and libav and tried to make the mplayer. > I'm updated my mplayer sources today from the cvs (codecs.conf has the > ffmpeg codecs). libavcode is already in mplayer cvs. you don't need to download ffmpeg and copy files. and you can't do that, because it doesn't work out-of-box, i've made some modifications on libavcodec to work together wiht mplayer. mayeb you used cvs update, instead of cvs update -d,so new dirs weren't checkouted A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 6 18:47:25 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 6 Jul 2001 18:47:25 +0200 (CEST) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) Can't comFri Jul 6 18:46:22 2001 In-Reply-To: <200107061746.NAA32083@burns.luca.2y.net> Message-ID: <200107061647.SAA21038@thot.banki.hu> Hi, > El Fri, 6 Jul 2001 18:15:59 +0200 Gabucino escribi?: > > G> It's the Question that drives us, Leandro Lucarella : > G> > Hi, I've downlaoded ffmpeg-0.4.3 and copied libavcodec and libav > G> Ehh. And why? 0.18pre4 contains libavcodec by default !! (see the subject > G> of the mail!) > > I've downloaded from cvs and there's no libavcodec dir... what should I > download? It _IS_ in the cvs. maybe you can't use cvs yet... checkout again, or use update -d to get new directories, not only file updates > http://mp.dev.hu/MPlayer/releases/MPlayer-0.18pre.tgz ? it is good too, 0.18pre4 contains it A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From tibcu at sch.bme.hu Fri Jul 6 18:53:05 2001 From: tibcu at sch.bme.hu (Balazs Tibor) Date: Fri, 6 Jul 2001 18:53:05 +0200 (MEST) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <20010706181659.B2525@woodstock.localdomain> Message-ID: > It's the Question that drives us, Balazs Tibor : > > maybe it's not true for all CPUs > It's not the CPU that matters (it's unoptimized yet), but the videocard. > That's why -vo null benchmarking isn't good. sure, that's why I made test with svga, x11 and dga outs too :-))) VIDEO: [DIV3] 384x288 24bpp 29.97 fps 1161.7 kbps (141.8 kbyte/s) Found video codec: [ffdivx] drv:5 (FFmpeg DivX ;-) (MS MPEG-4 v3)) Using Tseng ET6000 driver (2 MBytes MDRAM) VO: [svga] 384x288 => 384x288 Planar YV12 Using MMX for colorspace transform vo_svga: SVGAlib resolution: 400x300 32bpp - No video scaling BENCHMARKs: V: 20.096s VO: 9.728s A: 0.000s Sys: 5.147s = 34.971s BENCHMARK%: V: 57.4629% VO: 27.8181% A: 0.0000% Sys: 14.7190% = 100.0000% Cannot init MMX colorspace transform No accelerated colorspace conversion found vo_svga: SVGAlib resolution: 400x300 24bpp - No video scaling BENCHMARKs: V: 19.894s VO: 13.549s A: 0.000s Sys: 4.015s = 37.458s BENCHMARK%: V: 53.1109% VO: 36.1710% A: 0.0000% Sys: 10.7181% = 100.0000% Using MMX for colorspace transform vo_svga: SVGAlib resolution: 400x300 16bpp - No video scaling BENCHMARKs: V: 19.799s VO: 6.615s A: 0.000s Sys: 2.778s = 29.192s BENCHMARK%: V: 67.8234% VO: 22.6596% A: 0.0000% Sys: 9.5170% = 100.0000% Cannot init MMX colorspace transform No accelerated colorspace conversion found vo_svga: SVGAlib resolution: 400x300 15bpp - No video scaling BENCHMARKs: V: 19.729s VO: 7.878s A: 0.000s Sys: 2.677s = 30.284s BENCHMARK%: V: 65.1469% VO: 26.0144% A: 0.0000% Sys: 8.8387% = 100.0000% --- Found video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) VO: [svga] 384x288 => 384x288 BGR 32-bit vo_svga: SVGAlib resolution: 400x300 32bpp - No video scaling BENCHMARKs: V: 16.298s VO: 5.949s A: 0.000s Sys: 5.319s = 27.566s BENCHMARK%: V: 59.1239% VO: 21.5808% A: 0.0000% Sys: 19.2953% = 100.0000% vo_svga: SVGAlib resolution: 400x300 24bpp - No video scaling BENCHMARKs: V: 15.254s VO: 4.318s A: 0.000s Sys: 4.008s = 23.579s BENCHMARK%: V: 64.6910% VO: 18.3132% A: 0.0000% Sys: 16.9958% = 100.0000% vo_svga: SVGAlib resolution: 400x300 16bpp - No video scaling BENCHMARKs: V: 15.094s VO: 2.936s A: 0.000s Sys: 2.774s = 20.804s BENCHMARK%: V: 72.5529% VO: 14.1135% A: 0.0000% Sys: 13.3336% = 100.0000% vo_svga: SVGAlib resolution: 400x300 15bpp - No video scaling BENCHMARKs: V: 15.039s VO: 2.897s A: 0.000s Sys: 2.721s = 20.657s BENCHMARK%: V: 72.8031% VO: 14.0233% A: 0.0000% Sys: 13.1736% = 100.0000% same results with -nodshow with x11, similar, with dga, no results (A'rpi, maybe bug in benchmark with dga?) all my test outputs (of course -v ones) can be found in incoming/ffmpeg/test/* interesting Bye Tibcu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Fri Jul 6 18:56:46 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Fri, 6 Jul 2001 18:56:46 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: ; from tibcu@sch.bme.hu on Fri, Jul 06, 2001 at 06:34:05PM +0200 References: Message-ID: <20010706185646.A2665@woodstock.localdomain> It's the Question that drives us, Balazs Tibor : > that it's experimental (or unoptimized) and undocumented :) -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From luca at lucarella.com.ar Fri Jul 6 20:00:59 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Fri, 6 Jul 2001 15:00:59 -0300 (ART) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) Can't compilFri Jul 6 18:40:34 2001 In-Reply-To: <200107061642.SAA24610@thot.banki.hu> References: <200107061642.SAA24610@thot.banki.hu> Message-ID: <200107061915.PAA32222@burns.luca.2y.net> El Fri, 6 Jul 2001 18:42:00 +0200 (CEST) Arpi escribi?: A> Hi, A> A> > Hi, I've downlaoded ffmpeg-0.4.3 and copied libavcodec and libav into main A> > mplayer dir. I make the libavcodec and libav and tried to make the mplayer. A> > I'm updated my mplayer sources today from the cvs (codecs.conf has the A> > ffmpeg codecs). A> libavcode is already in mplayer cvs. you don't need to download ffmpeg and A> copy files. and you can't do that, because it doesn't work out-of-box, i've A> made some modifications on libavcodec to work together wiht mplayer. A> A> mayeb you used cvs update, instead of cvs update -d,so new dirs A> weren't checkouted Yeap, I thinks that was the problem... Now it's working great... I'm going to benchmark... -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From luca at lucarella.com.ar Fri Jul 6 20:16:23 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Fri, 6 Jul 2001 15:16:23 -0300 (ART) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: References: Message-ID: <200107061931.PAA32235@burns.luca.2y.net> El Fri, 6 Jul 2001 17:05:24 +0200 (MEST) Balazs Tibor escribi?: BT> CommandLine: '-vo' 'null' '/mnt/frutty/Games/movie/vagyamit.avi' '-nosound' '-osdlevel' '0' '-v' '-frames' '500' '-benchmark' BT> BT> VIDEO: [DIV3] 384x288 24bpp 29.97 fps 1161.7 kbps (141.8 kbyte/s) BT> [V] filefmt:3 fourcc:0x33564944 size:384x288 fps:29.97 ftime:=0.0334 BT> Found video codec: [ffdivx] drv:5 (FFmpeg DivX ;-) (MS MPEG-4 v3)) BT> BT> BENCHMARKs: V: 19.402s VO: 0.005s A: 0.000s Sys: 0.081s = 19.488s BT> BENCHMARK%: V: 99.5590% VO: 0.0266% A: 0.0000% Sys: 0.4144% = 100.0000% Same command line on Duron 800MHz at 1GHz: BENCHMARKs: V: 4.512s VO: 0.003s A: 0.000s Sys: 0.063s = 4.578s BENCHMARK%: V: 98.5590% VO: 0.0658% A: 0.0000% Sys: 1.3752% = 100.0000% BT> same version, same options (and after reediting codecs.conf) : BT> BT> Found video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) BT> BT> BENCHMARKs: V: 13.535s VO: 0.005s A: 0.000s Sys: 0.108s = 13.647s BT> BENCHMARK%: V: 99.1751% VO: 0.0345% A: 0.0000% Sys: 0.7904% = 100.0000% BT> BT> and with VfW (-nodshow) : BT> BT> Found video codec: [divx] drv:2 (DivX ;-) (MS MPEG-4 v3)) BT> BT> BENCHMARKs: V: 13.889s VO: 0.005s A: 0.000s Sys: 0.086s = 13.980s BT> BENCHMARK%: V: 99.3531% VO: 0.0352% A: 0.0000% Sys: 0.6118% = 100.0000% BENCHMARKs: V: 3.178s VO: 0.001s A: 0.000s Sys: 0.055s = 3.234s BENCHMARK%: V: 98.2686% VO: 0.0385% A: 0.0000% Sys: 1.6929% = 100.0000% BT> I wouldn't say, ff is faster in this case. (P200MMX) Me either... But I'm sure It will!!! ;) -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 6 23:23:14 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Fri, 6 Jul 2001 23:23:14 +0200 Subject: [Mplayer-users] ffdivx benchmark Message-ID: <01070623231400.00534@atmosfear> Hi mplayers :), actually ffmpeg decore still need lot of improvement to gain divxds speed, as you can see from results under heavy decoding load, performance gain through lowering of bandwidth via YV12 is quite small compared to loss in decoding speed: atmosfear:~/develop/mplayer/main # ./mplayer /windows/E/DivX/Coyote\ Ugly\ DiviX\ DVDRIP\ German\ MD\ Teil1.avi -nosound -frames 1500 -benchmark VIDEO: [DIV3] 640x480 24bpp 25.00 fps 1582.9 kbps (193.2 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:640x480 fps:25.00 ftime:=0.0400 Found video codec: [ffdivx] drv:5 (FFmpeg DivX ;-) (MS MPEG-4 v3)) libavcodec.size: 640 x 480 VO: [xv] 640x480 => 640x480 Planar YV12 BENCHMARKs: V: 16.355s VO: 2.568s A: 0.000s Sys: 5.835s = 24.757s BENCHMARK%: V: 66.0607% VO: 10.3719% A: 0.0000% Sys: 23.5674% = 100.0000% BENCHMARKs: V: 16.203s VO: 2.434s A: 0.000s Sys: 6.001s = 24.638s BENCHMARK%: V: 65.7641% VO: 9.8798% A: 0.0000% Sys: 24.3561% = 100.0000% VIDEO: [DIV3] 640x480 24bpp 25.00 fps 1582.9 kbps (193.2 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:640x480 fps:25.00 ftime:=0.0400 Found video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) Loading DLL: /usr/lib/win32/divx_c32.ax OK Using DirectShow codec: divx_c32.ax DShow: using YUY2 colorspace DivX setting result = 0 VO: [xv] 640x480 => 640x480 Packed YUY2 BENCHMARKs: V: 9.575s VO: 3.691s A: 0.000s Sys: 5.102s = 18.368s BENCHMARK%: V: 52.1289% VO: 20.0940% A: 0.0000% Sys: 27.7770% = 100.0000% BENCHMARKs: V: 9.852s VO: 3.935s A: 0.000s Sys: 4.761s = 18.547s BENCHMARK%: V: 53.1172% VO: 21.2155% A: 0.0000% Sys: 25.6673% = 100.0000% (btw. test system was PIII 932, 124MHz FSB, i440BX chipset, 512MB, GeForce 32MB DDR, Linux 2.2.19 and as memory bandwidth with the bx chipset is quite good, performance gain through YV12 should be bigger on K6 systems) -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lgb at lgb.hu Fri Jul 6 23:28:25 2001 From: lgb at lgb.hu (=?iso-8859-2?B?R+Fib3IgTOlu4XJ0?=) Date: Fri, 6 Jul 2001 23:28:25 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <200107060342.FAA47710@thot.banki.hu> Message-ID: <20010706232825.A9746@vega.digitel2002.hu> On Fri, Jul 06, 2001 at 05:42:42AM +0200, Arpi wrote: > - included libavcodec from Gerard Lantau's FFmpeg package > it has native (not Win32 hack) DivX ;-) and OpenDivX codec! > I made some measurements, and DivX seems to be even faster > than DirectShow codec without preprocessing, and only a few > percent slower than ProjectMayo's opendivx decoder. > It uses YV12 pixel format, so old Voodoo users can use it for YUV. I've just commited a minor hack: you can select driver type with command line option so no more codecs.conf editing is needed for testing mplayer with different codecs. AFAIK: -vcodec 1 ? -vcodec 2 wfv codec -vcodec 3 ? -vcodec 4 dshow codec -vcodec 5 ffmpeg codec Sorry I don't know too much on codec types so maybe a better config option range (the integer) checking is needed. Also, a better option name would be great ;-) If mplayer fails to find codec with the specified drv type it will default to the normal codec searching loop ignoring your request. ------ BTW ------ On my machine ffmpeg divx is slower than both of dshow and wfv codecs :( - Gabor -- --[ G?bor L?n?rt ]---[ Vivendi Telecom Hungary ]---------[ lgb at lgb.hu ]-- U have 8 bit comp or chip of them and it's unused or to be sold? Call me! -------[ +36 30 2270823 ]------> LGB <-----[ Linux/UNIX/8bit 4ever ]----- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Fri Jul 6 23:46:49 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Fri, 6 Jul 2001 23:46:49 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <20010706232825.A9746@vega.digitel2002.hu>; from lgb@lgb.hu on Fri, Jul 06, 2001 at 11:28:25PM +0200 References: <200107060342.FAA47710@thot.banki.hu> <20010706232825.A9746@vega.digitel2002.hu> Message-ID: <20010706234649.A4205@woodstock.localdomain> It's the Question that drives us, G?bor L?n?rt : > I've just commited a minor hack: Great! > On my machine ffmpeg divx is slower than both of dshow and wfv codecs :( Of course. Please stop telling this to us (pont te, LGB:).. It's just been commited to cvs today, how could it be optimized? BUT, if you experience it's faster somewhere, then please report it! -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From lgb at lgb.hu Fri Jul 6 23:55:50 2001 From: lgb at lgb.hu (=?iso-8859-2?B?R+Fib3IgTOlu4XJ0?=) Date: Fri, 6 Jul 2001 23:55:50 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <20010706234649.A4205@woodstock.localdomain> Message-ID: <20010706235550.B9746@vega.digitel2002.hu> On Fri, Jul 06, 2001 at 11:46:49PM +0200, Gabucino wrote: > > On my machine ffmpeg divx is slower than both of dshow and wfv codecs :( > Of course. Please stop telling this to us (pont te, LGB:).. It's just Kapppuccccsinnnoooooooooooo! ;-) -- --[ G?bor L?n?rt ]---[ Vivendi Telecom Hungary ]---------[ lgb at lgb.hu ]-- U have 8 bit comp or chip of them and it's unused or to be sold? Call me! -------[ +36 30 2270823 ]------> LGB <-----[ Linux/UNIX/8bit 4ever ]----- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From j at falooley.org Sat Jul 7 04:18:51 2001 From: j at falooley.org (Jason Lunz) Date: Fri, 06 Jul 2001 22:18:51 -0400 Subject: [Mplayer-users] dvd subtitles Message-ID: does mplayer support dvd subtitles? I have osd working, but it will only show the time. the docs say to use some subtitle file, but they don't say where to find it or what it looks like. where do these subtitles live on the dvd? thanks, jason _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From luca at lucarella.com.ar Sat Jul 7 05:52:56 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Sat, 7 Jul 2001 00:52:56 -0300 (ART) Subject: [Mplayer-users] dvd subtitles In-Reply-To: References: Message-ID: <200107070507.BAA00669@burns.luca.2y.net> El Fri, 06 Jul 2001 22:18:51 -0400 Jason Lunz escribi?: JL> does mplayer support dvd subtitles? I have osd working, but it will only JL> show the time. the docs say to use some subtitle file, but they don't JL> say where to find it or what it looks like. where do these subtitles JL> live on the dvd? Download them from: http://www.divxsubtitles.net/ -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lgb at lgb.hu Sat Jul 7 08:31:22 2001 From: lgb at lgb.hu (=?iso-8859-2?B?R+Fib3IgTOlu4XJ0?=) Date: Sat, 7 Jul 2001 08:31:22 +0200 Subject: [Mplayer-users] dvd subtitles In-Reply-To: <200107070507.BAA00669@burns.luca.2y.net> Message-ID: <20010707083122.C9746@vega.digitel2002.hu> On Sat, Jul 07, 2001 at 12:52:56AM -0300, Leandro Lucarella wrote: > El Fri, 06 Jul 2001 22:18:51 -0400 Jason Lunz escribi?: > > JL> does mplayer support dvd subtitles? I have osd working, but it will only > JL> show the time. the docs say to use some subtitle file, but they don't > JL> say where to find it or what it looks like. where do these subtitles > JL> live on the dvd? > > Download them from: http://www.divxsubtitles.net/ Don't confuse 'external subtitles' (subtitle files generated by various porgrams or men) and 'dvd subtitles'. Subtitle files (many format of them) are supported but DVD subtitles (built in the VOB file) are not supported currently. But it can be a workaround to get a subtitle file and use it anyway. - Gabor -- --[ G?bor L?n?rt ]---[ Vivendi Telecom Hungary ]---------[ lgb at lgb.hu ]-- U have 8 bit comp or chip of them and it's unused or to be sold? Call me! -------[ +36 30 2270823 ]------> LGB <-----[ Linux/UNIX/8bit 4ever ]----- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Sat Jul 7 12:34:46 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Sat, 07 Jul 2001 10:34:46 +0000 (:) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) Message-ID: Hi, Arpi! On 2001-07-06 14:44:49 you wrote: >it is the first open-source DivX ;-) (a.k.a. MS-Mpeg4) codec. >it's unoptimized yet, but in the future we (together with ffmpeg guys) >will optimize it Good and useful work, but I have some question: 1. You wrote "(together with ffmpeg guys)". How you understand it? What will be primary CVS - mplayer's or ffmegs's? 2. How you plan to sync with ffmpeg in the future? 3. What style of assembler should be prefered for this codec: nasm, gas or inline? Nasm is much better of gas, but I prefer inline assembler because it allows for compiler perform some additional optimization (like function inlining, loop unrolling and so on). Btw, I've found that this codec still can be optimized on "C" level (it contains some constructions which are not conforming with common optimization suggestions.) 4. The code which ffmeg's guys called _SSE should be renamed to MMX2 - it can be executed on K7. (gcc3.0's guys should do same, but they are too haughty, sorry!) Slight offtopic: I've read some announcements of Athlon4 and found that AMD (by rumour) will add SSE support to this chip. They called it 3dnow! professional, but indeed it will trivial SSE1 (probably). In this connexion - do you have any solutions about optimization for this cpu (3DNOW + SSE)? I've understand that for 1.5GHz cpu optimization level don't matter but from principle point - mplayer will choose SSE optimized sources against 3dnow if it find sse extension, but mplayer contains less SSE optimized code than 3dnow. (And in addition in case of mp3lib - MMX optimzed code is assigned for SSE for now.). I already told you that linuxvideo project contains a lot of SSE optimized code for libac3 but nobody who has P3 compatible cpu wanted to apply this functions to mplayer. Do you plan something to do? Maybe who has some ideas about? Best regards! Nick (2001-07-07 10:04:47) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sat Jul 7 11:19:05 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sat, 7 Jul 2001 11:19:05 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: References: Message-ID: <01070711190500.00627@atmosfear> On Saturday, 7. July 2001 12:34, you wrote: > Hi, Arpi! > [snip] > Slight offtopic: > I've read some announcements of Athlon4 and found that AMD (by rumour) will > add SSE support to this chip. They called it 3dnow! professional, but > indeed it will trivial SSE1 (probably). In this connexion - do you have any > solutions about optimization for this cpu (3DNOW + SSE)? I've understand > that for 1.5GHz cpu optimization level don't matter but from principle > point - mplayer will choose SSE optimized sources against 3dnow if it find > sse extension, but mplayer contains less SSE optimized code than 3dnow. > (And in addition in case of mp3lib - MMX optimzed code is assigned for SSE > for now.). I already told you that linuxvideo project contains a lot of SSE > optimized code for libac3 but nobody who has P3 compatible cpu wanted to > apply this functions to mplayer. > Do you plan something to do? if you assist me, I'd be glad to testout these optimizations with libac3 (have three P3 systems, two of them with dvd as you might know) > > Maybe who has some ideas about? > > Best regards! Nick (2001-07-07 10:04:47) > -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sat Jul 7 11:55:33 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sat, 7 Jul 2001 11:55:33 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <20010706232825.A9746@vega.digitel2002.hu> References: <20010706232825.A9746@vega.digitel2002.hu> Message-ID: <01070711553301.00627@atmosfear> On Friday, 6. July 2001 23:28, you wrote: > On Fri, Jul 06, 2001 at 05:42:42AM +0200, Arpi wrote: > > - included libavcodec from Gerard Lantau's FFmpeg package > > it has native (not Win32 hack) DivX ;-) and OpenDivX codec! > > I made some measurements, and DivX seems to be even faster > > than DirectShow codec without preprocessing, and only a few > > percent slower than ProjectMayo's opendivx decoder. > > It uses YV12 pixel format, so old Voodoo users can use it for YUV. > > I've just commited a minor hack: > you can select driver type with command line option so no more codecs.conf > editing is needed for testing mplayer with different codecs. AFAIK: > > -vcodec 1 ? > -vcodec 2 wfv codec > -vcodec 3 ? > -vcodec 4 dshow codec > -vcodec 5 ffmpeg codec > > Sorry I don't know too much on codec types so maybe a better config option > range (the integer) checking is needed. =) I've done about the same this night, only I use -ac and -vc where name is the codecs name from the codecs.conf, which is more convenient I think, so I removed your -vcodec stuff. Btw. I don't fallback to codec autodetect when forced codec fails, if one whants to force, why fallback? so you can do something like ./mplayer foo.avi -ac mp3acm -vc ffdivx > > Also, a better option name would be great ;-) > > If mplayer fails to find codec with the specified drv type it will default > to the normal codec searching loop ignoring your request. > > > ------ BTW ------ > > On my machine ffmpeg divx is slower than both of dshow and wfv codecs :( I recognized one thing: for low res/low bitrate movies ffmpeg is faster for high res/high bitrate divx dshow/vfw is faster. > > > - Gabor -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lgb at lgb.hu Sat Jul 7 12:08:02 2001 From: lgb at lgb.hu (=?iso-8859-2?B?R+Fib3IgTOlu4XJ0?=) Date: Sat, 7 Jul 2001 12:08:02 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <01070711553301.00627@atmosfear> Message-ID: <20010707120802.A12456@vega.digitel2002.hu> On Sat, Jul 07, 2001 at 11:55:33AM +0200, Felix Buenemann wrote: > > -vcodec 1 ? > > -vcodec 2 wfv codec > > -vcodec 3 ? > > -vcodec 4 dshow codec > > -vcodec 5 ffmpeg codec > > > > Sorry I don't know too much on codec types so maybe a better config option > > range (the integer) checking is needed. > =) I've done about the same this night, only I use -ac and -vc > where name is the codecs name from the codecs.conf, which is more convenient > I think, so I removed your -vcodec stuff. Btw. I don't fallback to codec > autodetect when forced codec fails, if one whants to force, why fallback? Because you may want to use ffmpeg codecs so you insert option into config file. But what if you want to play a different type of movie which isn't handled by ffmpeg codecs? My basic idea was the ability of selecting driver type IF available but allow to fall back other codecs if not supported by that driver type. With your patch it is not possible to give that option into config file to TRY to force driver type but not disturb formats which hasn't got codec inside that driver type set. Or something :) I hope I was clear enough but who knows ... > so you can do something like ./mplayer foo.avi -ac mp3acm -vc ffdivx Nice, but as I mentioned above you CAN'T insert these options to your config file!! I didn't want to FORCE a special codec BUT TRY to force a DRIVER TYPE (not codec). You option is usefull but somewhat differs from my goals so I think patches of both of us are usefull and for different things. (It would be usefull to force a dedicated audio/video codec for playing but it would be usefull to try to use codec from a driver family as well. These are not the same!!) - Gabor -- --[ G?bor L?n?rt ]---[ Vivendi Telecom Hungary ]---------[ lgb at lgb.hu ]-- U have 8 bit comp or chip of them and it's unused or to be sold? Call me! -------[ +36 30 2270823 ]------> LGB <-----[ Linux/UNIX/8bit 4ever ]----- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sat Jul 7 12:21:39 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sat, 7 Jul 2001 12:21:39 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <20010707120802.A12456@vega.digitel2002.hu> References: <20010707120802.A12456@vega.digitel2002.hu> Message-ID: <01070712213902.00627@atmosfear> On Saturday, 7. July 2001 12:08, you wrote: > On Sat, Jul 07, 2001 at 11:55:33AM +0200, Felix Buenemann wrote: > > > -vcodec 1 ? > > > -vcodec 2 wfv codec > > > -vcodec 3 ? > > > -vcodec 4 dshow codec > > > -vcodec 5 ffmpeg codec > > > > > > Sorry I don't know too much on codec types so maybe a better config > > > option range (the integer) checking is needed. > > > > =) I've done about the same this night, only I use -ac and -vc > > where name is the codecs name from the codecs.conf, which is more > > convenient I think, so I removed your -vcodec stuff. Btw. I don't > > fallback to codec autodetect when forced codec fails, if one whants to > > force, why fallback? > > Because you may want to use ffmpeg codecs so you insert option into config > file. But what if you want to play a different type of movie which isn't > handled by ffmpeg codecs? My basic idea was the ability of selecting driver > type IF available but allow to fall back other codecs if not supported by > that driver type. With your patch it is not possible to give that option > into config file to TRY to force driver type but not disturb formats which > hasn't got codec inside that driver type set. Or something :) I hope I was > clear enough but who knows ... > > > so you can do something like ./mplayer foo.avi -ac mp3acm -vc ffdivx > > Nice, but as I mentioned above you CAN'T insert these options to your > config file!! I didn't want to FORCE a special codec BUT TRY to force > a DRIVER TYPE (not codec). You option is usefull but somewhat differs from > my goals so I think patches of both of us are usefull and for different > things. (It would be usefull to force a dedicated audio/video codec for > playing but it would be usefull to try to use codec from a driver family > as well. These are not the same!!) I know, these switches are of course useless for config file, but if you always want to prefer ffmpeg codecs you can simply move them up in codecs.conf but we may simply allow bothe methods, so have -ac and -vc and also have -afm and -vfm how about that? > > - Gabor -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Sat Jul 7 12:24:57 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Sat, 7 Jul 2001 12:24:57 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <20010707120802.A12456@vega.digitel2002.hu>; from lgb@lgb.hu on Sat, Jul 07, 2001 at 12:08:02PM +0200 References: <01070711553301.00627@atmosfear> <20010707120802.A12456@vega.digitel2002.hu> Message-ID: <20010707122457.A5412@woodstock.localdomain> It's the Question that drives us, G?bor L?n?rt : > clear enough but who knows ... True.. Fallback is needed. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From lgb at lgb.hu Sat Jul 7 12:36:29 2001 From: lgb at lgb.hu (=?iso-8859-2?B?R+Fib3IgTOlu4XJ0?=) Date: Sat, 7 Jul 2001 12:36:29 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <01070712213902.00627@atmosfear> Message-ID: <20010707123629.A13314@vega.digitel2002.hu> On Sat, Jul 07, 2001 at 12:21:39PM +0200, Felix Buenemann wrote: > > that driver type. With your patch it is not possible to give that option > > into config file to TRY to force driver type but not disturb formats which > > hasn't got codec inside that driver type set. Or something :) I hope I was > > clear enough but who knows ... > > > > > so you can do something like ./mplayer foo.avi -ac mp3acm -vc ffdivx > > > > Nice, but as I mentioned above you CAN'T insert these options to your > > config file!! I didn't want to FORCE a special codec BUT TRY to force > > a DRIVER TYPE (not codec). You option is usefull but somewhat differs from > > my goals so I think patches of both of us are usefull and for different > > things. (It would be usefull to force a dedicated audio/video codec for > > playing but it would be usefull to try to use codec from a driver family > > as well. These are not the same!!) > I know, these switches are of course useless for config file, but if you > always want to prefer ffmpeg codecs you can simply move them up in codecs.conf > but we may simply allow bothe methods, so have -ac and -vc and also have -afm > and -vfm how about that? No. You may want to test performance of ffmpeg codecs only and you don't want to edit codecs.conf each time. I wanted to avoid this constant editing with my new option. You may want to use to test several ffmpeg codecs for a while on different type of movies (different codecs within ffmpeg codecs "familiy"). So it's simple to put a vcodec=5 line into your config file and you needn't worry about playing movies can't handled by ffmpeg codecs because mplayer would fall back other type of codecs in this way and so on. Maybe I'm wrong but imho now there is NO option to select codec driver FAMILY (not an individual codec, a set of codecs belong to the same driver type). For testing purposes I will keep my modification (though I'm not sure to mix it with your patch and commit or not) because it's much more easy to test several things in this way (dshow/nodshow switches were similar to my option but those were able to select between dshow/nodshow codecs only. I want to extend this to any type with -vcodec). Well, this is not a flame thread though it begins to become that :) -- --[ G?bor L?n?rt ]---[ Vivendi Telecom Hungary ]---------[ lgb at lgb.hu ]-- U have 8 bit comp or chip of them and it's unused or to be sold? Call me! -------[ +36 30 2270823 ]------> LGB <-----[ Linux/UNIX/8bit 4ever ]----- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From j at falooley.org Sat Jul 7 16:44:31 2001 From: j at falooley.org (Jason Lunz) Date: Sat, 07 Jul 2001 10:44:31 -0400 Subject: [Mplayer-users] dvd subtitles Message-ID: lgb at lgb.hu said: > Don't confuse 'external subtitles' (subtitle files generated by > various porgrams or men) and 'dvd subtitles'. Subtitle files (many > format of them) are supported but DVD subtitles (built in the VOB > file) are not supported currently. is there support for that in the mpeg2 decoder and mplayer doesn't use it, or is there just not code to read the subtitles at all? Does anyone know whether the subtitles are in the VOB or on some other part of the DVD? thanks, Jason _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sat Jul 7 17:53:48 2001 From: arpi at thot.banki.hu (Arpi) Date: Sat, 7 Jul 2001 17:53:48 +0200 (CEST) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <20010706232825.A9746@vega.digitel2002.hu> Message-ID: <200107071553.RAA21900@thot.banki.hu> Hi, > > - included libavcodec from Gerard Lantau's FFmpeg package > > it has native (not Win32 hack) DivX ;-) and OpenDivX codec! > > I made some measurements, and DivX seems to be even faster > > than DirectShow codec without preprocessing, and only a few > > percent slower than ProjectMayo's opendivx decoder. > > It uses YV12 pixel format, so old Voodoo users can use it for YUV. > > I've just commited a minor hack: > you can select driver type with command line option so no more codecs.conf You must chaneg this option to -vfm, to be consistent (it has the same function as -afm). Btw I prefer new option pair -ac and -vc to select audio and video codec by _name_, not driver code. > editing is needed for testing mplayer with different codecs. AFAIK: > > -vcodec 1 ? libmpeg2 > -vcodec 2 wfv codec > -vcodec 3 ? opendivx decore > -vcodec 4 dshow codec > -vcodec 5 ffmpeg codec > > Sorry I don't know too much on codec types so maybe a better config option > range (the integer) checking is needed. > > Also, a better option name would be great ;-) > > If mplayer fails to find codec with the specified drv type it will default > to the normal codec searching loop ignoring your request. > > > ------ BTW ------ > > On my machine ffmpeg divx is slower than both of dshow and wfv codecs :( I'll make some benchmarks again. It seemed to be faster for me last time... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From p_l at tfz.net Sat Jul 7 18:42:00 2001 From: p_l at tfz.net (pl) Date: Sat, 7 Jul 2001 18:42:00 +0200 Subject: [Mplayer-users] dvd subtitles In-Reply-To: References: Message-ID: <20010707184200.A8269@gruik.home> Hi, On Sat, Jul 07, 2001 at 10:44:31AM -0400, Jason Lunz wrote: [...] > Does anyone > know whether the subtitles are in the VOB or on some other part of the > DVD? There's some doc about subtitles for DVD's on the videolan project page: http://sam.zoy.org/doc/dvd/subtitles -- pl _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sat Jul 7 18:49:24 2001 From: arpi at thot.banki.hu (Arpi) Date: Sat, 7 Jul 2001 18:49:24 +0200 (CEST) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <20010707123629.A13314@vega.digitel2002.hu> Message-ID: <200107071649.SAA48066@thot.banki.hu> Hi, > On Sat, Jul 07, 2001 at 12:21:39PM +0200, Felix Buenemann wrote: > > > that driver type. With your patch it is not possible to give that option > > > into config file to TRY to force driver type but not disturb formats which > > > hasn't got codec inside that driver type set. Or something :) I hope I was > > > clear enough but who knows ... > > > > > > > so you can do something like ./mplayer foo.avi -ac mp3acm -vc ffdivx > > > > > > Nice, but as I mentioned above you CAN'T insert these options to your > > > config file!! I didn't want to FORCE a special codec BUT TRY to force > > > a DRIVER TYPE (not codec). You option is usefull but somewhat differs from > > > my goals so I think patches of both of us are usefull and for different > > > things. (It would be usefull to force a dedicated audio/video codec for > > > playing but it would be usefull to try to use codec from a driver family > > > as well. These are not the same!!) > > I know, these switches are of course useless for config file, but if you > > always want to prefer ffmpeg codecs you can simply move them up in codecs.conf > > but we may simply allow bothe methods, so have -ac and -vc and also have -afm > > and -vfm how about that? > > No. You may want to test performance of ffmpeg codecs only and you don't want > to edit codecs.conf each time. I wanted to avoid this constant editing with > my new option. You may want to use to test several ffmpeg codecs for a while > on different type of movies (different codecs within ffmpeg codecs "familiy"). > So it's simple to put a vcodec=5 line into your config file and you needn't > worry about playing movies can't handled by ffmpeg codecs because mplayer > would fall back other type of codecs in this way and so on. > > Maybe I'm wrong but imho now there is NO option to select codec driver > FAMILY (not an individual codec, a set of codecs belong to the same driver > type). For testing purposes I will keep my modification (though I'm not sure > to mix it with your patch and commit or not) because it's much more easy to > test several things in this way (dshow/nodshow switches were similar to my > option but those were able to select between dshow/nodshow codecs only. > I want to extend this to any type with -vcodec). > > Well, this is not a flame thread though it begins to become that :) Ok. Then my opinion: We need both -ac/-vc options (to select a single driver by name, and fail if it can't be selected) and -afm/-vfm to select codec family (it was 'format' before, but 'fm' is goof for 'family' too :)) This -afm/-vfm stuff should fallback to autodetect, if no usable codec found in the selected driver (it will solve Nick's -afm 1 vs. AC3 problem too) -> it means that -afm should be fixed too (it will force driver, doesn't matter that if works...) and -vfm added again. If we are alredy here, then the status field of codec descriptors should be handled too. For exampel, simply skip drivers with 'crashing' status... (skip if there are other working codecs for this format, and print warning message if no better codec found) and we should move to -dev-eng list... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sat Jul 7 18:59:06 2001 From: arpi at thot.banki.hu (Arpi) Date: Sat, 7 Jul 2001 18:59:06 +0200 (CEST) Subject: [Mplayer-users] dvd subtitles In-Reply-To: Message-ID: <200107071659.SAA21116@thot.banki.hu> Hi, > lgb at lgb.hu said: > > Don't confuse 'external subtitles' (subtitle files generated by > > various porgrams or men) and 'dvd subtitles'. Subtitle files (many > > format of them) are supported but DVD subtitles (built in the VOB > > file) are not supported currently. > > is there support for that in the mpeg2 decoder and mplayer doesn't use > it, or is there just not code to read the subtitles at all? Does anyone > know whether the subtitles are in the VOB or on some other part of the > DVD? It's partially implemented, at least my demuxer reads subtitles (if you selected dvd subtitle with -sid option), but dvd sub rendering has not been implemented yet. It is 4-color bitmap with transparency, so libvo should have such renderer. (divx subtitles are plain text, so it's totally different thing) I'll finish it when we changed to libvo2. (soon, but after the 0.18 release) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sat Jul 7 18:54:48 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-2?B?RmVsaXggQvxuZW1hbm4=?=) Date: Sat, 7 Jul 2001 18:54:48 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <20010707123629.A13314@vega.digitel2002.hu> References: <20010707123629.A13314@vega.digitel2002.hu> Message-ID: <7722998299.20010707185448@gmx.de> Hello G?bor, Saturday, July 07, 2001, 12:36:29 PM, you wrote: GL> On Sat, Jul 07, 2001 at 12:21:39PM +0200, Felix Buenemann wrote: >> > that driver type. With your patch it is not possible to give that option >> > into config file to TRY to force driver type but not disturb formats which >> > hasn't got codec inside that driver type set. Or something :) I hope I was >> > clear enough but who knows ... >> > >> > > so you can do something like ./mplayer foo.avi -ac mp3acm -vc ffdivx >> > >> > Nice, but as I mentioned above you CAN'T insert these options to your >> > config file!! I didn't want to FORCE a special codec BUT TRY to force >> > a DRIVER TYPE (not codec). You option is usefull but somewhat differs from >> > my goals so I think patches of both of us are usefull and for different >> > things. (It would be usefull to force a dedicated audio/video codec for >> > playing but it would be usefull to try to use codec from a driver family >> > as well. These are not the same!!) >> I know, these switches are of course useless for config file, but if you >> always want to prefer ffmpeg codecs you can simply move them up in codecs.conf >> but we may simply allow bothe methods, so have -ac and -vc and also have -afm >> and -vfm how about that? GL> No. You may want to test performance of ffmpeg codecs only and you don't want GL> to edit codecs.conf each time. I wanted to avoid this constant editing with GL> my new option. You may want to use to test several ffmpeg codecs for a while GL> on different type of movies (different codecs within ffmpeg codecs "familiy"). GL> So it's simple to put a vcodec=5 line into your config file and you needn't GL> worry about playing movies can't handled by ffmpeg codecs because mplayer GL> would fall back other type of codecs in this way and so on. GL> Maybe I'm wrong but imho now there is NO option to select codec driver GL> FAMILY (not an individual codec, a set of codecs belong to the same driver GL> type). For testing purposes I will keep my modification (though I'm not sure GL> to mix it with your patch and commit or not) because it's much more easy to GL> test several things in this way (dshow/nodshow switches were similar to my GL> option but those were able to select between dshow/nodshow codecs only. GL> I want to extend this to any type with -vcodec). yea that's why I say to readd -afm and -vfm which is out to select codec family, while -avc and -vc select specific codec. GL> Well, this is not a flame thread though it begins to become that :) -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lgb at lgb.hu Sat Jul 7 18:58:32 2001 From: lgb at lgb.hu (=?iso-8859-2?B?R+Fib3IgTOlu4XJ0?=) Date: Sat, 7 Jul 2001 18:58:32 +0200 Subject: [Mplayer-users] dvd subtitles In-Reply-To: Message-ID: <20010707185832.A13462@vega.digitel2002.hu> On Sat, Jul 07, 2001 at 10:44:31AM -0400, Jason Lunz wrote: > lgb at lgb.hu said: > > Don't confuse 'external subtitles' (subtitle files generated by > > various porgrams or men) and 'dvd subtitles'. Subtitle files (many > > format of them) are supported but DVD subtitles (built in the VOB > > file) are not supported currently. > > is there support for that in the mpeg2 decoder and mplayer doesn't use > it, or is there just not code to read the subtitles at all? Does anyone > know whether the subtitles are in the VOB or on some other part of the > DVD? There are in the VOB. mplayer can "decode" them with the '-sid ' option but no code present to uncompress image data (yes, they're images) and display them. For example xine has got DVD subtitle display support. -- --[ G?bor L?n?rt ]---[ Vivendi Telecom Hungary ]---------[ lgb at lgb.hu ]-- U have 8 bit comp or chip of them and it's unused or to be sold? Call me! -------[ +36 30 2270823 ]------> LGB <-----[ Linux/UNIX/8bit 4ever ]----- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Sat Jul 7 19:27:25 2001 From: jaf.corporation at gmx.at (JAF) Date: Sat, 07 Jul 2001 19:27:25 +0200 Subject: [Mplayer-users] Translations In-Reply-To: <200107071659.SAA21116@thot.banki.hu> Message-ID: Hi ... i've already translated a part, but now my notebook is defect ;-( sorry - but gericom suxx where shut i put it? who is the right person to send it to ?? mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sat Jul 7 19:35:09 2001 From: arpi at thot.banki.hu (Arpi) Date: Sat, 7 Jul 2001 19:35:09 +0200 (CEST) Subject: [Mplayer-users] Translations In-Reply-To: Message-ID: <200107071735.TAA21126@thot.banki.hu> Hi, > i've already translated a part, but now my notebook is > defect ;-( sorry - but gericom suxx > > where shut i put it? > who is the right person to send it to ?? > Send it to Atmosfear (Felix Brueneman), he can overview it and commit to CVS. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From hagn at gmx.net Sat Jul 7 22:01:05 2001 From: hagn at gmx.net (Marcus Hagn) Date: Sat, 7 Jul 2001 22:01:05 +0200 Subject: [Mplayer-users] Splitting avi files Message-ID: <20010707220105.A1052@silence> Hi, whats the easiest way to split avi (divx) files. i know, this has been asked before, but the search feature of the list archive on geocrawler is not working for me. hang loose marcus btw mplayer is great piece of software. but you propably know this already :) -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From kinali at gmx.net Sat Jul 7 22:45:54 2001 From: kinali at gmx.net (Attila Kinali) Date: Sat, 7 Jul 2001 22:45:54 +0200 Subject: [Mplayer-users] dvd subtitles In-Reply-To: <200107071659.SAA21116@thot.banki.hu> References: <200107071659.SAA21116@thot.banki.hu> Message-ID: On Sat, 7 Jul 2001 18:59:06 +0200 (CEST) Arpi wrote: > It's partially implemented, at least my demuxer reads subtitles (if you > selected dvd subtitle with -sid option), but dvd sub rendering has not been > implemented yet. It is 4-color bitmap with transparency, so libvo should > have such renderer. > (divx subtitles are plain text, so it's totally different thing) Little remark: i got a divx which seems to have a dvd sub file: ---schnipp--- attila at pc-attila:~/anime/saber_marionette# ls index.html Saber Marionette J - 04.idx Saber Marionette J - 04.avi Saber Marionette J - 04.sub attila at pc-attila:~/anime/saber_marionette# file Saber\ Marionette\ J\ -\ 04.sub Saber Marionette J - 04.sub: MPEG system stream data ---schnapp--- No, mplayer cant play the .sub file, i tried it :-) Would be nice to have this working too, when dvd sub rendere works. Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Sat Jul 7 22:50:32 2001 From: kinali at gmx.net (Attila Kinali) Date: Sat, 7 Jul 2001 22:50:32 +0200 Subject: [Mplayer-users] dvd subtitles In-Reply-To: <20010707184200.A8269@gruik.home> References: <20010707184200.A8269@gruik.home> Message-ID: On Sat, 7 Jul 2001 18:42:00 +0200 pl wrote: > There's some doc about subtitles for DVD's on the videolan project page: > http://sam.zoy.org/doc/dvd/subtitles But there isn't anyone at the moment knowing where the color palete is :-( Drip got also dvd sub support (mainly copied from videolan) and it looks really strange. I know there is someone working on a colour chooser for vlc, but it isn't really a solution. Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sat Jul 7 22:54:13 2001 From: arpi at thot.banki.hu (Arpi) Date: Sat, 7 Jul 2001 22:54:13 +0200 (CEST) Subject: [Mplayer-users] dvd subtitles In-Reply-To: Message-ID: <200107072054.WAA47994@thot.banki.hu> Hi, > On Sat, 7 Jul 2001 18:42:00 +0200 pl wrote: > > > > There's some doc about subtitles for DVD's on the videolan project page: > > http://sam.zoy.org/doc/dvd/subtitles > > But there isn't anyone at the moment knowing where the color palete is :-( I know. it is in the .IFO file. but nobody has good ifo parser yet :( A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sat Jul 7 23:13:01 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Sat, 7 Jul 2001 23:13:01 +0200 Subject: [Mplayer-users] Translations In-Reply-To: <200107071735.TAA21126@thot.banki.hu> References: <200107071735.TAA21126@thot.banki.hu> Message-ID: <6838491537.20010707231301@gmx.de> Hello Arpi, Saturday, July 07, 2001, 7:35:09 PM, you wrote: A> Hi, >> i've already translated a part, but now my notebook is >> defect ;-( sorry - but gericom suxx >> >> where shut i put it? >> who is the right person to send it to ?? >> A> Send it to Atmosfear (Felix Brueneman), he can overview it and commit to CVS. yepp send it to Felix.Buenemann at gmx.de (my sourceforge mail also goes there, but delayed...) A> A'rpi / Astral & ESP-team -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sat Jul 7 23:15:20 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Sat, 7 Jul 2001 23:15:20 +0200 Subject: [Mplayer-users] Splitting avi files In-Reply-To: <20010707220105.A1052@silence> References: <20010707220105.A1052@silence> Message-ID: <6038630487.20010707231520@gmx.de> Hello Marcus, Saturday, July 07, 2001, 10:01:05 PM, you wrote: MH> Hi, MH> whats the easiest way to split avi (divx) files. MH> i know, this has been asked before, but the search MH> feature of the list archive on geocrawler is not MH> working for me. MH> hang loose MH> marcus under windooze use virtual dub (http://virtualdub.sourceforge.net/) under linux it should work with qtrecompress from avifile package (http://divx.euro.ru I think), but only did myself with vdub (it roxx). MH> btw mplayer is great piece of software. but you propably MH> know this already :) -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gulliver at patagonia.dyndns.org Sun Jul 8 03:43:54 2001 From: gulliver at patagonia.dyndns.org (Nicolas Beaulieu) Date: Sat, 7 Jul 2001 21:43:54 -0400 (EDT) Subject: [Mplayer-users] Switching/Choosing language with DVD Message-ID: Hi, I want to watch a new DVD, but it starts to play in French... Anybody knows how to switch language while playing a DVD? At least, how can I choose the language of my DVD? Thanks. /nb ________________ Nicolas Beaulieu Universite Laval Departement d'economique et CREFA _________________ _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 8 03:49:09 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 8 Jul 2001 03:49:09 +0200 (CEST) Subject: [Mplayer-users] Switching/Choosing language with DVD In-Reply-To: Message-ID: <200107080149.DAA10340@thot.banki.hu> Hi, > > I want to watch a new DVD, but it starts to play in French... > > Anybody knows how to switch language while playing a DVD? you can't do it yet > At least, how can I choose the language of my DVD? rtfm DOCS/DVD it's the -aid option, try values 128-255 for ac3/pcm, and 0-31 for mpeg A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 8 05:29:07 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 8 Jul 2001 05:29:07 +0200 (CEST) Subject: [Mplayer-users] ffdivx benchmark In-Reply-To: <01070623231400.00534@atmosfear> Message-ID: <200107080329.FAA14552@thot.banki.hu> Hi, > VIDEO: [DIV3] 640x480 24bpp 25.00 fps 1582.9 kbps (193.2 kbyte/s) hmm. nice bitrate :) i need this file for testing... the biggest bitrate file i've found was only 133k/s :( now my results: 023bbe58aba3b32c7b5c45549a34b5a8 sample.light.it.up.avi VIDEO: [DIV3] 640x352 24bpp 23.98 fps 823.5 kbps (100.5 kbyte/s) divxds: BENCHMARKs: V: 15.393s VO: 0.006s A: 0.000s Sys: 0.274s = 15.674s BENCHMARK%: V: 98.2086% VO: 0.0411% A: 0.0000% Sys: 1.7503% = 100.0000% divx: BENCHMARKs: V: 14.819s VO: 0.008s A: 0.000s Sys: 0.269s = 15.095s BENCHMARK%: V: 98.1672% VO: 0.0498% A: 0.0000% Sys: 1.7831% = 100.0000% ffdivx: BENCHMARKs: V: 15.202s VO: 0.012s A: 0.000s Sys: 0.300s = 15.514s BENCHMARK%: V: 97.9917% VO: 0.0749% A: 0.0000% Sys: 1.9334% = 100.0000% 1e9672b20e5b7661ba310ada93280a17 pokemon.2000-sample.avi VIDEO: [DIV3] 480x320 24bpp 23.98 fps 1134.3 kbps (138.5 kbyte/s) divxds: BENCHMARKs: V: 9.926s VO: 0.005s A: 0.000s Sys: 0.253s = 10.185s BENCHMARK%: V: 97.4619% VO: 0.0538% A: 0.0000% Sys: 2.4843% = 100.0000% divx: BENCHMARKs: V: 9.625s VO: 0.006s A: 0.000s Sys: 0.249s = 9.880s BENCHMARK%: V: 97.4151% VO: 0.0642% A: 0.0000% Sys: 2.5206% = 100.0000% ffdivx: BENCHMARKs: V: 10.211s VO: 0.009s A: 0.000s Sys: 0.263s = 10.483s BENCHMARK%: V: 97.4038% VO: 0.0870% A: 0.0000% Sys: 2.5092% = 100.0000% efe8af98159f1c0aa0e24a420c28e29b Vengaboys_Shalala_Lala.avi VIDEO: [DIV3] 352x160 24bpp 25.00 fps 573.2 kbps (70.0 kbyte/s) divxds: BENCHMARKs: V: 20.285s VO: 0.019s A: 0.000s Sys: 0.986s = 21.290s BENCHMARK%: V: 95.2790% VO: 0.0886% A: 0.0000% Sys: 4.6324% = 100.0000% divx: BENCHMARKs: V: 37.366s VO: 0.030s A: 0.000s Sys: 0.994s = 38.390s BENCHMARK%: V: 97.3323% VO: 0.0773% A: 0.0000% Sys: 2.5903% = 100.0000% ffdivx: BENCHMARKs: V: 19.821s VO: 0.033s A: 0.000s Sys: 1.002s = 20.856s BENCHMARK%: V: 95.0379% VO: 0.1590% A: 0.0000% Sys: 4.8031% = 100.0000% 19158168f6897ab43b1a2703fb0f73e3 405divx_sm_v2[1].avi size:?8103936 VIDEO: [DIV3] 356x240 24bpp 30.00 fps 343.2 kbps (41.9 kbyte/s) divxds: BENCHMARKs: V: 17.708s VO: 0.016s A: 0.000s Sys: 0.656s = 18.380s BENCHMARK%: V: 96.3443% VO: 0.0851% A: 0.0000% Sys: 3.5706% = 100.0000% divx: BENCHMARKs: V: 31.790s VO: 0.023s A: 0.000s Sys: 0.693s = 32.506s BENCHMARK%: V: 97.7967% VO: 0.0720% A: 0.0000% Sys: 2.1313% = 100.0000% ffdivx: BENCHMARKs: V: 16.138s VO: 0.027s A: 0.000s Sys: 0.718s = 16.883s BENCHMARK%: V: 95.5850% VO: 0.1620% A: 0.0000% Sys: 4.2530% = 100.0000% gladiator_2.avi: (first 2000 frames) VIDEO: [DIV3] 640x312 24bpp 25.00 fps 1091.7 kbps (133.3 kbyte/s) divxds: BENCHMARKs: V: 18.803s VO: 0.006s A: 0.000s Sys: 0.327s = 19.135s BENCHMARK%: V: 98.2627% VO: 0.0292% A: 0.0000% Sys: 1.7081% = 100.0000% divx: BENCHMARKs: V: 18.384s VO: 0.010s A: 0.000s Sys: 0.317s = 18.710s BENCHMARK%: V: 98.2536% VO: 0.0522% A: 0.0000% Sys: 1.6941% = 100.0000% ffdivx: BENCHMARKs: V: 17.157s VO: 0.014s A: 0.000s Sys: 0.376s = 17.547s BENCHMARK%: V: 97.7778% VO: 0.0773% A: 0.0000% Sys: 2.1449% = 100.0000% System: Abit BE6-2 Celeron2-600 @ 900MHz (100MHz FSB) 256MB PC133 SDRAM @ 2/2/2 Matrox G400MAX (doesn't matter, I've used -vo null) Result: For low (<80) bitrates, ffdivx wins, and VfW is extremly slow. For highbitrates (>80) the order is reverse, vfw wins, and ffmpeg is the slowest (but not more than 10% slower than vfw). I think that memory speed / cache size is the bottleneck here. I have about 130MB/s ram, and 1500MB/s L2 cache speed on this system (printed by memtest86 v2.5). As celeron2 has only 128kb L2 cache, it may not enough :( I'll test it on a celeron2-800 @ 1066 / 133 FSB, 165MB/s ram system soon :) I'm interested in results made on slow cpu (p200mmx/k6/k6-2/celeron1) with fast memory. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 8 06:01:32 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 8 Jul 2001 06:01:32 +0200 (CEST) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: Message-ID: <200107080401.GAA28904@thot.banki.hu> Hi, > Btw, I've done some "reverse engineer" analysis and didn't find any MMX or SSE opcodes > in l3codeca.acm. > At first - these DLL is never called by mplayer. > Second - why this record is present in mplayer conf > Third - I don't know - may be you have l3codeca.acm which is optimized for MMX and SSE > but my copy doesn't contain such optimization. > You're right. Just checked this, and got the same result: no mmx/sse code in it. I don't know why did i see such code in it before :) I've just done some benchmarking, and got results: mp3lib: BENCHMARKs: V: 0.000s VO: 0.000s A: 0.298s Sys: 20.513s = 20.811s BENCHMARK%: V: 0.0000% VO: 0.0000% A: 1.4339% Sys: 98.5661% = 100.0000% mp3acm: BENCHMARKs: V: 0.000s VO: 0.000s A: 0.415s Sys: 20.393s = 20.808s BENCHMARK%: V: 0.0000% VO: 0.0000% A: 1.9952% Sys: 98.0048% = 100.0000% => new mp3lib is much faster! great work! A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From zensoul at cs.cmu.edu Sun Jul 8 06:07:12 2001 From: zensoul at cs.cmu.edu (Owen Cheng) Date: Sun, 08 Jul 2001 00:07:12 -0400 Subject: [Mplayer-users] mplayer halts with signal 4 Message-ID: <3B47DC70.E6ED8C6E@cs.cmu.edu> Hello, I just downloaded, successfully compiled, and installed MPlayer 0.17a, with SDL 1.1.8 (I tested the SDL library using its test scripts, and all tests pass). But when I tried to play a DivX format AVI file (The Matrix, stored on local harddisk, size 557 MB), the player runs okay until the line "Start playing..." is printed, and then halts with signal 4. I do not know what signal 4 is, nor could I find this in the DOCS nor search it on the List (because the search script is broken). I tried changing to root and playing, with the same result. Here's my computer info: Kernel: Linux 2.2.16 #8 Wed Jan 24 17:08:47 EST 2001 i686 unknown Distrib: Redhat 6.2 + glibc 2.1.3-22 gcc: gcc version 2.95.3 20010315 (release) binutils: GNU assembler 2.9.5 X11: XFree86 3.3.6 + video: Matrox Millennium G400 16MB sound: Creative SBLive! with OSS (kernel) cpu: Intel Pentium III 733MHZ Attached is the play log with -v option. Thanks for your help. -- Owen Cheng Y1.PhD.Student ISRI.SCS.CMU http://owen.ZenOolon.com/ -------------- next part -------------- A non-text attachment was scrubbed... Name: play.log Type: application/octet-stream Size: 2840 bytes Desc: not available URL: From zenoolon at yahoo.com Sun Jul 8 06:12:51 2001 From: zenoolon at yahoo.com (Owen Cheng) Date: Sun, 08 Jul 2001 00:12:51 -0400 Subject: [Mplayer-users] mplayer halts with signal 4 Message-ID: <3B47DDC3.2A6E9024@yahoo.com> Hello, I just downloaded, successfully compiled, and installed MPlayer 0.17a, with SDL 1.1.8 (I tested the SDL library using its test scripts, and all tests pass). But when I tried to play a DivX format AVI file (The Matrix, stored on local harddisk, size 557 MB), the player runs okay until the line "Start playing..." is printed, and then halts with signal 4. I do not know what signal 4 is, nor could I find this in the DOCS nor search it on the List (because the search script is broken). I tried changing to root and playing, with the same result. Here's my computer info: Kernel: Linux 2.2.16 #8 Wed Jan 24 17:08:47 EST 2001 i686 unknown Distrib: Redhat 6.2 + glibc 2.1.3-22 gcc: gcc version 2.95.3 20010315 (release) binutils: GNU assembler 2.9.5 X11: XFree86 3.3.6 + video: Matrox Millennium G400 16MB sound: Creative SBLive! with OSS (kernel) cpu: Intel Pentium III 733MHZ Attached is the play log with -v option. Thanks for your help. -- Owen Cheng Y1.PhD.Student ISRI.SCS.CMU http://owen.ZenOolon.com/ -------------- next part -------------- A non-text attachment was scrubbed... Name: play.log Type: application/octet-stream Size: 2841 bytes Desc: not available URL: From arpi at thot.banki.hu Sun Jul 8 06:19:43 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 8 Jul 2001 06:19:43 +0200 (CEST) Subject: [Mplayer-users] mplayer halts with signal 4 In-Reply-To: <3B47DC70.E6ED8C6E@cs.cmu.edu> Message-ID: <200107080419.GAA10394@thot.banki.hu> Hi, > I just downloaded, successfully compiled, and installed MPlayer 0.17a, with download 0.18pre4, 0.17 is very very old with many alerady fixed bugs... > Kernel: Linux 2.2.16 #8 Wed Jan 24 17:08:47 EST 2001 i686 unknown > cpu: Intel Pentium III 733MHZ not a good pair... if your problem still exists with 0.18pre4, try to recompile wiht --disable-sse (kernels 2.2.x have problem with SSE), if still not ok, read DOCS/BUGS and DOCS/BUGREPORTS A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 8 06:31:27 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 8 Jul 2001 06:31:27 +0200 (CEST) Subject: [Mplayer-users] ffdivx benchmark In-Reply-To: <200107080329.FAA14552@thot.banki.hu> Message-ID: <200107080431.GAA14544@thot.banki.hu> Hi, > 023bbe58aba3b32c7b5c45549a34b5a8 sample.light.it.up.avi > VIDEO: [DIV3] 640x352 24bpp 23.98 fps 823.5 kbps (100.5 kbyte/s) > divxds: > BENCHMARKs: V: 15.393s VO: 0.006s A: 0.000s Sys: 0.274s = 15.674s > BENCHMARK%: V: 98.2086% VO: 0.0411% A: 0.0000% Sys: 1.7503% = 100.0000% > divx: > BENCHMARKs: V: 14.819s VO: 0.008s A: 0.000s Sys: 0.269s = 15.095s > BENCHMARK%: V: 98.1672% VO: 0.0498% A: 0.0000% Sys: 1.7831% = 100.0000% > ffdivx: > BENCHMARKs: V: 15.202s VO: 0.012s A: 0.000s Sys: 0.300s = 15.514s > BENCHMARK%: V: 97.9917% VO: 0.0749% A: 0.0000% Sys: 1.9334% = 100.0000% I've recompiled libavcodec (ffmpeg stuff) with Intel's compiler, and got better results: BENCHMARKs: V: 14.446s VO: 0.009s A: 0.000s Sys: 0.293s = 14.749s BENCHMARK%: V: 97.9504% VO: 0.0639% A: 0.0000% Sys: 1.9857% = 100.0000% It detected some code parts and vectorized those, so this way it used a little MMX. I think it can be much better optimized by hand. (I'm waiting for answer from ffmpeg author about code syncronization and CVS access) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From pete.schneider at home.com Sun Jul 8 08:28:56 2001 From: pete.schneider at home.com (Peter J. Schneider) Date: Sun, 08 Jul 2001 01:28:56 -0500 Subject: [Mplayer-users] DVD Audio Message-ID: <3B47FDA8.9070107@home.com> I have a dvd movie with 6 "chapters" vts_02_1.vob vts_02_2.vob vts_02_3.vob vts_02_4.vob vts_02_5.vob vts_02_6.vob Chapters 1 & 4 play and sound fine. Chapters 2, 3, 5 & 6 are fine for the video and music but the voice track is either missing or is coming from one of the "fillers" that was included on the dvd. I've read the faqs and man page and could not find any thing that seemed to address this problem. I'll be happy to provide any information that might help. -- Pete Schneider _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 8 11:33:39 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Sun, 8 Jul 2001 11:33:39 +0200 Subject: [Mplayer-users] ffdivx benchmark In-Reply-To: <200107080329.FAA14552@thot.banki.hu> References: <200107080329.FAA14552@thot.banki.hu> Message-ID: <1582929336.20010708113339@gmx.de> Hello Arpi, Sunday, July 08, 2001, 5:29:07 AM, you wrote: A> Hi, >> VIDEO: [DIV3] 640x480 24bpp 25.00 fps 1582.9 kbps (193.2 kbyte/s) A> hmm. nice bitrate :) A> i need this file for testing... A> the biggest bitrate file i've found was only 133k/s :( I'll cutout a nice scene for you :) and upload to ftp. A> now my results: [skip] A> Result: A> For low (<80) bitrates, ffdivx wins, and VfW is extremly slow. For highbitrates (>>80) the order is reverse, vfw wins, and ffmpeg A> is the slowest (but not more than 10% slower than vfw). That's about what I saw, only for highres speed difference was bigger here if I remember correct. [snip] A> I'm interested in results made on slow cpu (p200mmx/k6/k6-2/celeron1) with A> fast memory. A> A'rpi / Astral & ESP-team A> -- A> mailto:arpi at thot.banki.hu A> http://esp-team.scene.hu -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 8 11:36:14 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Sun, 8 Jul 2001 11:36:14 +0200 Subject: [Mplayer-users] mplayer halts with signal 4 In-Reply-To: <200107080419.GAA10394@thot.banki.hu> References: <200107080419.GAA10394@thot.banki.hu> Message-ID: <10083084509.20010708113614@gmx.de> Hello Arpi, Sunday, July 08, 2001, 6:19:43 AM, you wrote: A> Hi, >> I just downloaded, successfully compiled, and installed MPlayer 0.17a, with A> download 0.18pre4, 0.17 is very very old with many alerady fixed bugs... >> Kernel: Linux 2.2.16 #8 Wed Jan 24 17:08:47 EST 2001 i686 unknown >> cpu: Intel Pentium III 733MHZ A> not a good pair... A> if your problem still exists with 0.18pre4, try to recompile wiht A> --disable-sse (kernels 2.2.x have problem with SSE), if still not ok, A> read DOCS/BUGS and DOCS/BUGREPORTS or better upgrade kernel to 2.4 series. A> A'rpi / Astral & ESP-team A> -- A> mailto:arpi at thot.banki.hu A> http://esp-team.scene.hu -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From DVornheder at t-online.de Sun Jul 8 13:34:45 2001 From: DVornheder at t-online.de (Dirk Vornheder) Date: Sun, 8 Jul 2001 13:34:45 +0200 Subject: [Mplayer-users] File dec_video.c is missing Message-ID: <15JDaX-0ycBPsC@fwd04.sul.t-online.com> Hi ! Compile of latest cvs fails: root at PCLAP /privat/tv/mplayer > make dep && make && make install ./version.sh gcc -MM -O4 -march=i686 -mcpu=i686 -pipe -ffast-math -fomit-frame-pointer -Iloader -Ilibvo -I/usr/local/include -I/usr/local/include mplayer.c find_sub.c aviprint.c dll_init.c dec_audio.c dec_video.c aviwrite.c aviheader.c asfheader.c demux_avi.c demux_asf.c demux_mpg.c demuxer.c stream.c codec-cfg.c subreader.c linux/getch2.c linux/timer-lx.c linux/shmem.c xa/xa_gsm.c lirc_mp.c cfgparser.c mixer.c dvdauth.c spudec.c 1>.depend gcc: dec_video.c: No such file or directory In file included from /usr/include/linux/fs.h:11, from dvdauth.c:78: /usr/include/linux/wait.h:4: warning: `WNOHANG' redefined /usr/include/bits/waitflags.h:26: warning: this is the location of the previous definition /usr/include/linux/wait.h:5: warning: `WUNTRACED' redefined /usr/include/bits/waitflags.h:27: warning: this is the location of the previous definition make: *** [depend] Error 1 Dirk _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 8 14:27:40 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 8 Jul 2001 14:27:40 +0200 (CEST) Subject: [Mplayer-users] File dec_video.c is missing In-Reply-To: <15JDaX-0ycBPsC@fwd04.sul.t-online.com> Message-ID: <200107081227.OAA10276@thot.banki.hu> Hi, > gcc: dec_video.c: No such file or directory ups. sorry, i forget to commit it :) try now. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Sun Jul 8 15:14:58 2001 From: kinali at gmx.net (Attila Kinali) Date: Sun, 8 Jul 2001 15:14:58 +0200 Subject: [Mplayer-users] mplayer halts with signal 4 In-Reply-To: <3B47DDC3.2A6E9024@yahoo.com> References: <3B47DDC3.2A6E9024@yahoo.com> Message-ID: On Sun, 08 Jul 2001 00:12:51 -0400 Owen Cheng wrote: > Kernel: Linux 2.2.16 #8 Wed Jan 24 17:08:47 EST 2001 i686 unknown Do you have SSE optimisation enabled ? It does not work with 2.2 kernels (kernel bug). Use either a 2.4. or ./configure --disable-sse Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Sun Jul 8 15:44:45 2001 From: jaf.corporation at gmx.at (JAF) Date: Sun, 8 Jul 2001 15:44:45 +0200 Subject: [Mplayer-users] DivXG400 Message-ID: <000c01c107b4$268ac1a0$6400a8c0@p3> HI ... today i've found something about the DivXG400-Codoc anybody is talking about ... look at this http://www.tac.ee/~prr/videoutils/divxg400.html it's an .ax file i read it also works on not-g4xx video-cards ... mfg Johannes -------------- next part -------------- An HTML attachment was scrubbed... URL: From atmosfear at users.sourceforge.net Sun Jul 8 16:02:53 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Sun, 8 Jul 2001 16:02:53 +0200 Subject: [Mplayer-users] ffdivx benchmark In-Reply-To: <200107080329.FAA14552@thot.banki.hu> References: <200107080329.FAA14552@thot.banki.hu> Message-ID: <18699082873.20010708160253@gmx.de> Hello Arpi, Sunday, July 08, 2001, 5:29:07 AM, you wrote: A> Hi, >> VIDEO: [DIV3] 640x480 24bpp 25.00 fps 1582.9 kbps (193.2 kbyte/s) A> hmm. nice bitrate :) A> i need this file for testing... A> the biggest bitrate file i've found was only 133k/s :( ok, check ftp://mp.dev.hu/MPlayer/incoming/ffmpeg/Coyote.Ugly.Sample-highbitrate-atmos.avi 18meg ~1min A> A'rpi / Astral & ESP-team -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Sun Jul 8 16:12:39 2001 From: jaf.corporation at gmx.at (JAF) Date: Sun, 8 Jul 2001 16:12:39 +0200 Subject: [Mplayer-users] DivXG400 References: <000c01c107b4$268ac1a0$6400a8c0@p3> Message-ID: <000901c107b8$0c387cd0$6400a8c0@p3> Well, now i've tested it under windows. it's a big difference betreen installed or not installed of this DIVX-Driver. I think that can make resizing of output by videos much easyer !!! unter windows the resizing now is very faster!!! mfg Johannes ----- Original Message ----- From: JAF To: mplayer-users at lists.sourceforge.net Sent: Sunday, July 08, 2001 3:44 PM Subject: [Mplayer-users] DivXG400 HI ... today i've found something about the DivXG400-Codoc anybody is talking about ... look at this http://www.tac.ee/~prr/videoutils/divxg400.html it's an .ax file i read it also works on not-g4xx video-cards ... mfg Johannes -------------- next part -------------- An HTML attachment was scrubbed... URL: From arpi at thot.banki.hu Sun Jul 8 16:18:21 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 8 Jul 2001 16:18:21 +0200 (CEST) Subject: [Mplayer-users] DivXG400 In-Reply-To: <000901c107b8$0c387cd0$6400a8c0@p3> Message-ID: <200107081418.QAA21304@thot.banki.hu> Hi, > Well, now i've tested it under windows. > > it's a big difference betreen installed or not installed of this DIVX-Driver. > I think that can make resizing of output by videos much easyer !!! > unter windows the resizing now is very faster!!! yea, windows suck, we know. but why is it interesting for us, linux users? mplayer/linux doesn't have this 32-pixel limitation, so no such problems at all - then who need this hack/workaround for a non-existing problem? i don't know about Xv, but for -vo mga/xmga, any image size is allowed. > > mfg Johannes > ----- Original Message ----- > From: JAF > To: mplayer-users at lists.sourceforge.net > Sent: Sunday, July 08, 2001 3:44 PM > Subject: [Mplayer-users] DivXG400 > > > HI ... > > today i've found something about the DivXG400-Codoc anybody is talking about ... > > look at this > > http://www.tac.ee/~prr/videoutils/divxg400.html > > it's an .ax file > i read it also works on not-g4xx video-cards ... > > mfg Johannes > > > > > > > > > >
Well, now i've tested it under > windows.
>
 
>
it's a big difference betreen installed or not > installed of this DIVX-Driver.
>
I think that can make resizing of output by videos > much easyer !!!
>
 
>
unter windows the resizing now is very > faster!!!
>
 
>
mfg Johannes
>
style="BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px; PADDING-RIGHT: 0px"> >
----- Original Message -----
>
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black">From: > JAF >
> >
Sent: Sunday, July 08, 2001 3:44 PM
>
Subject: [Mplayer-users] DivXG400
>

>
HI ...
>
 
>
today i've found something about the > DivXG400-Codoc anybody is talking about ...
>
 
>
look at this
>
 
> >
 
>
it's an .ax file
>
i read it also works on not-g4xx video-cards > ...
>
 
>
mfg > Johannes
> > > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Sun Jul 8 16:23:58 2001 From: jaf.corporation at gmx.at (JAF) Date: Sun, 8 Jul 2001 16:23:58 +0200 Subject: [Mplayer-users] DivXG400 References: <200107081418.QAA21304@thot.banki.hu> Message-ID: <000d01c107b9$a094e020$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* > mplayer/linux doesn't have this 32-pixel limitation, so no such problems > at all - then who need this hack/workaround for a non-existing problem? well ... what about fbdev ??? > > i don't know about Xv, but for -vo mga/xmga, any image size is allowed. > > > mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Sun Jul 8 16:29:20 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Sun, 8 Jul 2001 16:29:20 +0200 Subject: [Mplayer-users] ffdivx benchmark on slow machine Message-ID: <20010708162920.A12701@hoth.amu.edu.pl> FreeBSD 4.3 AMD K6-2 333MHz + C&T CT65554 + Xv (24bpp) gcc version 2.95.3 [FreeBSD] 20010315 (release) XFree86 Version 4.1.0 / X Window System MPlayer 0.17cvs-010708-15:10(C) 2000-2001 Arpad Gereoffy (MMX + 3DNow) -nosound -benchmark [-dshow] [-vc ffdivx] Space Cowboys trailer: VIDEO: [DIV3] 480x200 24bpp 24.00 fps 154.3 kbps (18.8 kbyte/s) divx: BENCHMARKs: V: 27.042s VO: 10.757s A: 0.000s Sys: 20.953s = 58.752s BENCHMARK%: V: 46.0276% VO: 18.3094% A: 0.0000% Sys: 35.6631% = 100.0000% divxds: BENCHMARKs: V: 27.896s VO: 10.777s A: 0.000s Sys: 20.461s = 59.133s BENCHMARK%: V: 47.1745% VO: 18.2244% A: 0.0000% Sys: 34.6011% = 100.0000% ffdivx: BENCHMARKs: V: 49.861s VO: 9.257s A: 0.000s Sys: 17.305s = 76.423s BENCHMARK%: V: 65.2434% VO: 12.1133% A: 0.0000% Sys: 22.6433% = 100.0000% MI2 trailer: VIDEO: [DIV3] 480x204 24bpp 24.00 fps 700.6 kbps (85.5 kbyte/s) divx: BENCHMARKs: V: 42.496s VO: 9.176s A: 0.000s Sys: 18.107s = 69.779s BENCHMARK%: V: 60.9012% VO: 13.1504% A: 0.0000% Sys: 25.9484% = 100.0000% divxds: BENCHMARKs: V: 43.920s VO: 9.246s A: 0.000s Sys: 17.625s = 70.790s BENCHMARK%: V: 62.0424% VO: 13.0606% A: 0.0000% Sys: 24.8970% = 100.0000% ffdivx: BENCHMARKs: V: 63.671s VO: 9.333s A: 0.000s Sys: 18.321s = 91.325s BENCHMARK%: V: 69.7186% VO: 10.2196% A: 0.0000% Sys: 20.0617% = 100.0000% Tomb Raider trailer: VIDEO: [DIV3] 480x260 24bpp 24.00 fps 761.0 kbps (92.9 kbyte/s) divx: BENCHMARKs: V: 52.795s VO: 11.696s A: 0.000s Sys: 21.815s = 86.306s BENCHMARK%: V: 61.1721% VO: 13.5521% A: 0.0000% Sys: 25.2759% = 100.0000% divxds: BENCHMARKs: V: 53.720s VO: 11.518s A: 0.000s Sys: 21.426s = 86.664s BENCHMARK%: V: 61.9861% VO: 13.2910% A: 0.0000% Sys: 24.7230% = 100.0000% ffdivx: BENCHMARKs: V: 75.025s VO: 11.877s A: 0.000s Sys: 22.034s = 108.936s BENCHMARK%: V: 68.8708% VO: 10.9026% A: 0.0000% Sys: 20.2266% = 100.0000% Wing Commander trailer: VIDEO: [DIV3] 640x360 24bpp 24.00 fps 846.9 kbps (103.4 kbyte/s) divx: BENCHMARKs: V: 43.489s VO: 10.456s A: 0.000s Sys: 19.549s = 73.494s BENCHMARK%: V: 59.1742% VO: 14.2268% A: 0.0000% Sys: 26.5990% = 100.0000% divxds: BENCHMARKs: V: 44.782s VO: 10.556s A: 0.000s Sys: 19.319s = 74.657s BENCHMARK%: V: 59.9838% VO: 14.1396% A: 0.0000% Sys: 25.8766% = 100.0000% ffdivx: BENCHMARKs: V: 62.605s VO: 8.188s A: 0.000s Sys: 19.616s = 90.410s BENCHMARK%: V: 69.2464% VO: 9.0568% A: 0.0000% Sys: 21.6968% = 100.0000% Dune trailer: VIDEO: [DIV3] 624x356 24bpp 24.00 fps 1154.6 kbps (140.9 kbyte/s) divx: BENCHMARKs: V: 37.724s VO: 10.268s A: 0.000s Sys: 19.301s = 67.292s BENCHMARK%: V: 56.0593% VO: 15.2591% A: 0.0000% Sys: 28.6816% = 100.0000% divxds: BENCHMARKs: V: 38.985s VO: 10.256s A: 0.000s Sys: 19.054s = 68.295s BENCHMARK%: V: 57.0831% VO: 15.0168% A: 0.0000% Sys: 27.9001% = 100.0000% ffdivx: BENCHMARKs: V: 62.498s VO: 10.769s A: 0.000s Sys: 19.103s = 92.370s BENCHMARK%: V: 67.6606% VO: 11.6589% A: 0.0000% Sys: 20.6805% = 100.0000% Gladiator trailer: VIDEO: [DIV3] 480x272 24bpp 24.00 fps 986.1 kbps (120.4 kbyte/s) divx: BENCHMARKs: V: 39.884s VO: 9.207s A: 0.000s Sys: 16.531s = 65.622s BENCHMARK%: V: 60.7779% VO: 14.0309% A: 0.0000% Sys: 25.1913% = 100.0000% divxds: BENCHMARKs: V: 39.979s VO: 9.080s A: 0.000s Sys: 16.298s = 65.357s BENCHMARK%: V: 61.1703% VO: 13.8925% A: 0.0000% Sys: 24.9372% = 100.0000% ffdivx: BENCHMARKs: V: 58.397s VO: 8.855s A: 0.000s Sys: 16.803s = 84.054s BENCHMARK%: V: 69.4752% VO: 10.5345% A: 0.0000% Sys: 19.9903% = 100.0000% Ronin trailer: VIDEO: [DIV3] 640x304 24bpp 25.00 fps 820.6 kbps (100.2 kbyte/s) divx: BENCHMARKs: V: 75.235s VO: 20.104s A: 0.000s Sys: 35.425s = 130.764s BENCHMARK%: V: 57.5352% VO: 15.3742% A: 0.0000% Sys: 27.0906% = 100.0000% divxds: BENCHMARKs: V: 78.421s VO: 19.961s A: 0.000s Sys: 34.960s = 133.342s BENCHMARK%: V: 58.8122% VO: 14.9696% A: 0.0000% Sys: 26.2182% = 100.0000% ffdivx: BENCHMARKs: V: 116.941s VO: 14.743s A: 0.000s Sys: 36.564s = 168.248s BENCHMARK%: V: 69.5052% VO: 8.7625% A: 0.0000% Sys: 21.7323% = 100.0000% Hannibal trailer: VIDEO: [DIV3] 480x260 24bpp 24.00 fps 185.7 kbps (22.7 kbyte/s) divx: BENCHMARKs: V: 35.301s VO: 13.662s A: 0.000s Sys: 24.846s = 73.808s BENCHMARK%: V: 47.8274% VO: 18.5097% A: 0.0000% Sys: 33.6628% = 100.0000% divxds: BENCHMARKs: V: 36.113s VO: 13.567s A: 0.000s Sys: 24.449s = 74.129s BENCHMARK%: V: 48.7158% VO: 18.3022% A: 0.0000% Sys: 32.9820% = 100.0000% ffdivx: BENCHMARKs: V: 70.192s VO: 13.309s A: 0.000s Sys: 24.315s = 107.816s BENCHMARK%: V: 65.1039% VO: 12.3442% A: 0.0000% Sys: 22.5519% = 100.0000% Best Regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 8 16:26:21 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 8 Jul 2001 16:26:21 +0200 (CEST) Subject: [Mplayer-users] DivXG400 In-Reply-To: <000d01c107b9$a094e020$6400a8c0@p3> Message-ID: <200107081426.QAA35568@thot.banki.hu> Hi, > *This message was transferred with a trial version of CommuniGate(tm) Pro* > > mplayer/linux doesn't have this 32-pixel limitation, so no such problems > > at all - then who need this hack/workaround for a non-existing problem? > > well ... what about fbdev ??? what? -vo mga i really don't understand what's your problem and how can this windows hack tool help us? it's a workaround for the buggy g400 directdraw windows driver. nothing usefull for linux users. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Sun Jul 8 16:32:38 2001 From: jaf.corporation at gmx.at (JAF) Date: Sun, 8 Jul 2001 16:32:38 +0200 Subject: [Mplayer-users] DivXG400 References: <200107081426.QAA35568@thot.banki.hu> Message-ID: <000b01c107ba$d6d2b850$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* > what? > > -vo mga mga does only work on matox card, doesn't it ? what other card and you will use fbdev? in fbdev you cannot resize at the moment? or ? > i really don't understand what's your problem and how can this windows > hack tool help us? it's a workaround for the buggy g400 directdraw windows > driver. nothing usefull for linux users. > > > A'rpi / Astral & ESP-team > > -- > mailto:arpi at thot.banki.hu > http://esp-team.scene.hu > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Sun Jul 8 17:15:01 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Sun, 8 Jul 2001 17:15:01 +0200 Subject: [Mplayer-users] DivXG400 In-Reply-To: <000b01c107ba$d6d2b850$6400a8c0@p3>; from jaf.corporation@gmx.at on Sun, Jul 08, 2001 at 04:32:38PM +0200 References: <200107081426.QAA35568@thot.banki.hu> <000b01c107ba$d6d2b850$6400a8c0@p3> Message-ID: <20010708171501.A10875@woodstock.localdomain> It's the Question that drives us, JAF : > mga does only work on matox card, doesn't it ? > what other card and you will use fbdev? > in fbdev you cannot resize at the moment? or ? WTF?! The list's language is english... -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From jaf.corporation at gmx.at Sun Jul 8 17:23:14 2001 From: jaf.corporation at gmx.at (JAF) Date: Sun, 8 Jul 2001 17:23:14 +0200 Subject: [Mplayer-users] DivXG400 References: <200107081426.QAA35568@thot.banki.hu> <000b01c107ba$d6d2b850$6400a8c0@p3> Message-ID: <000f01c107c1$e839f700$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* sorry ... my english is not perfect ... I will try again... > > what? > > > > -vo mga > mga does only work on matox card, doesn't it ? what about other card and using fbdev? in fbdev you cannot resize the video output? or ? is that better ?? mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Sun Jul 8 20:58:23 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Sun, 08 Jul 2001 18:58:23 +0000 (:) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <01070711190500.00627@atmosfear> Message-ID: Hi, Felix Buenemann! On 2001-07-07 11:19:05 you wrote: >> for now.). I already told you that linuxvideo project contains a lot of SSE >> optimized code for libac3 but nobody who has P3 compatible cpu wanted to >> apply this functions to mplayer. >> Do you plan something to do? >if you assist me, I'd be glad to testout these optimizations with libac3 >(have three P3 systems, two of them with dvd as you might know) > No problem! Can you apply linuxvideo stuff to mplayer? If - no then I can do it as patch which you will be able to test and then apply. Best regards! Nick (2001-07-08 18:56:53) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 8 17:30:59 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 8 Jul 2001 17:30:59 +0200 (CEST) Subject: [Mplayer-users] DivXG400 In-Reply-To: <000b01c107ba$d6d2b850$6400a8c0@p3> Message-ID: <200107081530.RAA09014@thot.banki.hu> Hi, > *This message was transferred with a trial version of CommuniGate(tm) Pro* > > what? > > > > -vo mga > > mga does only work on matox card, doesn't it ? yes > what other card and you will use fbdev? > in fbdev you cannot resize at the moment? or ? yes. but this divxg400 dll has nothing with this problem. it's a wrapper for the directdraw windows drivers... the problem is that only a few cards has Xv driver under linux, and only 2 cards (matrox g200/400 and sis 6326) has native overlay driver (which is usable under framebuffer or X 3.3.x too). and until card manufacturers releases drivers or register-level docs, it stay unchanged. :( A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Sun Jul 8 17:37:29 2001 From: jaf.corporation at gmx.at (JAF) Date: Sun, 8 Jul 2001 17:37:29 +0200 Subject: [Mplayer-users] DivXG400 - LAST MAIL References: <200107081530.RAA09014@thot.banki.hu> Message-ID: <001b01c107c3$e5d3e190$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* Well (or not well), i'm sorry ;-) mfg Johannes > Hi, > > > *This message was transferred with a trial version of CommuniGate(tm) Pro* > > > what? > > > > > > -vo mga > > > > mga does only work on matox card, doesn't it ? > yes > > > what other card and you will use fbdev? > > in fbdev you cannot resize at the moment? or ? > yes. but this divxg400 dll has nothing with this problem. > it's a wrapper for the directdraw windows drivers... > > the problem is that only a few cards has Xv driver under linux, > and only 2 cards (matrox g200/400 and sis 6326) has native overlay > driver (which is usable under framebuffer or X 3.3.x too). > and until card manufacturers releases drivers or register-level docs, > it stay unchanged. :( _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 8 17:54:17 2001 From: atmosfear at users.sourceforge.net (=?koi8-r?B?RmVsaXggQthuZW1hbm4=?=) Date: Sun, 8 Jul 2001 17:54:17 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: References: Message-ID: <24105767355.20010708175417@gmx.de> Hello Nick, Sunday, July 08, 2001, 8:58:23 PM, you wrote: NK> Hi, Felix Buenemann! NK> On 2001-07-07 11:19:05 you wrote: >>> for now.). I already told you that linuxvideo project contains a lot of SSE >>> optimized code for libac3 but nobody who has P3 compatible cpu wanted to >>> apply this functions to mplayer. >>> Do you plan something to do? >>if you assist me, I'd be glad to testout these optimizations with libac3 >>(have three P3 systems, two of them with dvd as you might know) >> NK> No problem! Can you apply linuxvideo stuff to mplayer? NK> If - no then I can do it as patch which you will be able to test and then apply. I think you already took a look at it, so you know which parts are needed and I won't have to search through linuxvdeo cvs for it, so I'll really appreciate a patch. NK> Best regards! Nick (2001-07-08 18:56:53) -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From luca at lucarella.com.ar Sun Jul 8 19:29:38 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Sun, 8 Jul 2001 14:29:38 -0300 (ART) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <01070711553301.00627@atmosfear> References: <20010706232825.A9746@vega.digitel2002.hu> <01070711553301.00627@atmosfear> Message-ID: <200107081845.OAA06121@burns.luca.2y.net> El Sat, 7 Jul 2001 11:55:33 +0200 Felix Buenemann escribi?: FB> I think, so I removed your -vcodec stuff. Btw. I don't fallback to codec FB> autodetect when forced codec fails, if one whants to force, why fallback? I think fallback is useful to have a default codec. If I try to use dshow codec with an AVI that doesn't have a dshow codec, what happend? I mean if I put the vcodec (or vc) in the config file, not in the command line, of course. -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From luca at lucarella.com.ar Sun Jul 8 19:31:47 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Sun, 8 Jul 2001 14:31:47 -0300 (ART) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <01070712213902.00627@atmosfear> References: <20010707120802.A12456@vega.digitel2002.hu> <01070712213902.00627@atmosfear> Message-ID: <200107081847.OAA06126@burns.luca.2y.net> El Sat, 7 Jul 2001 12:21:39 +0200 Felix Buenemann escribi?: FB> I know, these switches are of course useless for config file, but if you FB> always want to prefer ffmpeg codecs you can simply move them up in codecs.conf FB> but we may simply allow bothe methods, so have -ac and -vc and also have -afm FB> and -vfm how about that? I think is much easyer to modify ONE line of the config file and not 20 of the codecs.conf file... -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From zensoul at cs.cmu.edu Mon Jul 9 00:41:09 2001 From: zensoul at cs.cmu.edu (Owen Cheng) Date: Sun, 08 Jul 2001 18:41:09 -0400 Subject: [Mplayer-users] RE: mplayer halts with signal 4 Message-ID: <3B48E185.97C4F33F@yahoo.com> > I just downloaded, successfully compiled, and installed MPlayer 0.17a, A> download 0.18pre4, 0.17 is very very old with many alerady fixed bugs... Thanks. 0.18pre4 works like a charm. The video/audio sync was somewhat frustrating at first, and I had to enable framedrop, which I did not expect to have to do with this CPU. I guess this may have to do with an inappropriate kernel version for the CPU. > Kernel: Linux 2.2.16 #8 Wed Jan 24 17:08:47 EST 2001 i686 unknown > cpu: Intel Pentium III 733MHZ A> not a good pair... A> if your problem still exists with 0.18pre4, try to recompile wiht A> --disable-sse (kernels 2.2.x have problem with SSE), if still not ok, A> read DOCS/BUGS and DOCS/BUGREPORTS A> A'rpi / Astral & ESP-team -- Owen Cheng Y1.PhD.Student ISRI.SCS.CMU http://owen.ZenOolon.com/ _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 9 01:22:46 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 9 Jul 2001 01:22:46 +0200 (CEST) Subject: [Mplayer-users] RE: mplayer halts with signal 4 In-Reply-To: <3B48E185.97C4F33F@yahoo.com> Message-ID: <200107082322.BAA32148@thot.banki.hu> Hi, > > I just downloaded, successfully compiled, and installed MPlayer 0.17a, > A> download 0.18pre4, 0.17 is very very old with many alerady fixed bugs... > > Thanks. 0.18pre4 works like a charm. The video/audio sync was somewhat > frustrating at first, and I had to enable framedrop, which I did not expect > to have to do with this CPU. I guess this may have to do with an > inappropriate kernel version for the CPU. Not the CPU is the problem for you, rather the video card... read DOCS/VIDEOCARDS A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Mon Jul 9 11:28:16 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Mon, 09 Jul 2001 09:28:16 +0000 (:) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <200107080401.GAA28904@thot.banki.hu> Message-ID: Hi, Arpi! On 2001-07-08 06:01:32 you wrote: >> Btw, I've done some "reverse engineer" analysis and didn't find any MMX or SSE opcodes >> in l3codeca.acm. >> At first - these DLL is never called by mplayer. >> Second - why this record is present in mplayer conf >> Third - I don't know - may be you have l3codeca.acm which is optimized for MMX and SSE >> but my copy doesn't contain such optimization. >> > >You're right. >Just checked this, and got the same result: no mmx/sse code in it. >I don't know why did i see such code in it before :) > >I've just done some benchmarking, and got results: >mp3lib: >BENCHMARKs: V: 0.000s VO: 0.000s A: 0.298s Sys: 20.513s = 20.811s >BENCHMARK%: V: 0.0000% VO: 0.0000% A: 1.4339% Sys: 98.5661% = 100.0000% >mp3acm: >BENCHMARKs: V: 0.000s VO: 0.000s A: 0.415s Sys: 20.393s = 20.808s >BENCHMARK%: V: 0.0000% VO: 0.0000% A: 1.9952% Sys: 98.0048% = 100.0000% > >=> new mp3lib is much faster! great work! > IMHO it's still one reason to remove l3codeca.acm from mplayer same as all win32 stuff in the future, isn't? Best regards! Nick (2001-07-09 09:27:03) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From joshua at openverse.org Mon Jul 9 09:31:09 2001 From: joshua at openverse.org (joshua) Date: Mon, 9 Jul 2001 03:31:09 -0400 Subject: [Mplayer-users] plugins Message-ID: <20010709033109.71cc8a0b.joshua@openverse.org> Guys, your player seems really well worked on and you have a dilegent group of people coding for it, but theres one thing I would really like to see somebody make. This would be a plugin for xmms. It wouldnt be too hard to make I dont think (wish I could do it myself). It would basically use xmms as the gui for mplayer, perhaps with the setup having the options and checkboxes for selecting which types of media to use mplayer for. I like the xmms gui, but sometimes the video support can be kinda buggy and this would go perfect together. Maybe you are against the idea and this is why you haven't done it yet, but I like using xmms for all my media and if xmms could gain the performance of the mplayer libs it would be one of the best media players EVER known to man period haha ok enough blabbering Joshua _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From 520026136523-0001 at t-online.de Mon Jul 9 13:50:03 2001 From: 520026136523-0001 at t-online.de (Moritz Moeller-Herrmann) Date: Mon, 9 Jul 2001 13:50:03 +0200 Subject: [Mplayer-users] artsd support? Message-ID: <20010709135003.A18316@rosalind.local> Hi, I checked out mplayer for the first time and like it A LOT. Nice error handling, better than avifile and a lot faster, too. Great! Thanks! My only problem ATM is the missing arts support. Does anyone know if such a thing is planned? I heard that some Mplayer devlopers have a dislike for KDE, but artsd is the coming standard for Gnome-2.0, too, so support should really be considered. (Please CC: me, I am not subscribed to the list) -- Moritz Moeller-Herrmann mmh at gmx.net ICQ# 3585990 Mosh: ?Moritz ist ein weltbekannter Troll? -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 240 bytes Desc: not available URL: From latehyun at magicn.com Mon Jul 9 15:28:19 2001 From: latehyun at magicn.com (Yang Hyun) Date: Mon, 09 Jul 2001 22:28:19 +0900 Subject: [Mplayer-users] a suggestion .. Message-ID: <3B49B173.6080904@magicn.com> hi ! Mplayer Team !! (I am not english user, so pardon me :) I am a fan of Mplayer and love to use the Mplayer for my video files. I found that functions of "idtc_mmx.c" was called many time. I have heard Macro Functions are better than Inline Functions in Speed . I think the functions of "idtc_mmx.c" is easy to be chaged to Macro func. eg) block_copy,block_add function and there are many codes which must be chaged to "shift operator" . eg) DCT_offset = stride * 8; -> DCT_offset = stride << 3; val = (val*qus*qum[j]) / 32; -> val = (val*qus*qum[j]) >> 5 ; Don't be angly about my suggestion. I just want to help you ... (I am rookey about C compiler) and I found a wonderful thing. my system k2-500Mhz when playing a same MPEG1 file, in win98' Media Play uses 30% cpu, but Mplayer uses 10~15% cpu I hope the Mplayer will be the best player of the world ! Have a nice day !! mplayer team ! from a lazybone .... (I want to be a SKINMAKER. What do I do ?) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From latehyun at magicn.com Mon Jul 9 16:21:40 2001 From: latehyun at magicn.com (Yang Hyun) Date: Mon, 09 Jul 2001 23:21:40 +0900 Subject: [Mplayer-users] in the below message "shift operator" was cut by message server Message-ID: <3B49BDF4.8050105@magicn.com> .... _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Mon Jul 9 18:21:03 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Mon, 9 Jul 2001 18:21:03 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: ; from nickols_k@mail.ru on Mon, Jul 09, 2001 at 09:28:16AM +0000 References: <200107080401.GAA28904@thot.banki.hu> Message-ID: <20010709182103.B15302@woodstock.localdomain> It's the Question that drives us, Nick Kurshev : > IMHO it's still one reason to remove l3codeca.acm from mplayer same as all > win32 stuff in the future, isn't? Why do you hate it so much? Did it kill your dog? It should be as optional as libavcodec is now. Or I dunno. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From p_l at tfz.net Mon Jul 9 18:51:54 2001 From: p_l at tfz.net (pl) Date: Mon, 9 Jul 2001 18:51:54 +0200 Subject: [Mplayer-users] a suggestion .. In-Reply-To: <3B49B173.6080904@magicn.com> References: <3B49B173.6080904@magicn.com> Message-ID: <20010709185154.A23200@gruik.home> Hi, On Mon, Jul 09, 2001 at 10:28:19PM +0900, Yang Hyun wrote: [...] > I found that functions of "idtc_mmx.c" was called many time. > I have heard Macro Functions are better than Inline Functions in Speed . > I think the functions of "idtc_mmx.c" is easy to be chaged to Macro func. > eg) block_copy,block_add function [..] That's not always true: if your macro is quite big you may run slower because of cache effects. inline is juste an advice given to gcc, IIRC: when you declare a function "inline", gcc tries to inline it if it can and "thinks" the inlining is valuable. If inlined, the output should be (is ?) very close to the output you would have got if it had been a macro. > and there are many codes which must be chaged to "shift operator" . > eg) DCT_offset = stride * 8; > -> DCT_offset = stride << 3; [...] That may have been true in the past but nowadays, most compiler tend to optimize such constructions (multiplication by a constant) by correctly generating a bitshift or more efficient code if it's not a 2^n. Regards. -- pl _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Mon Jul 9 18:35:00 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Mon, 9 Jul 2001 18:35:00 +0200 Subject: [Mplayer-users] plugins In-Reply-To: <20010709033109.71cc8a0b.joshua@openverse.org>; from joshua@openverse.org on Mon, Jul 09, 2001 at 03:31:09AM -0400 References: <20010709033109.71cc8a0b.joshua@openverse.org> Message-ID: <20010709183500.C15302@woodstock.localdomain> It's the Question that drives us, joshua : > yet, but I like using xmms for all my media and if xmms could gain the Soon you will like MPlayer, for all your media :) -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From gabucino at k2.jozsef.kando.hu Mon Jul 9 18:37:18 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Mon, 9 Jul 2001 18:37:18 +0200 Subject: [Mplayer-users] a suggestion .. In-Reply-To: <3B49B173.6080904@magicn.com>; from latehyun@magicn.com on Mon, Jul 09, 2001 at 10:28:19PM +0900 References: <3B49B173.6080904@magicn.com> Message-ID: <20010709183718.D15302@woodstock.localdomain> It's the Question that drives us, Yang Hyun : > (I want to be a SKINMAKER. What do I do ?) Contact Pontscho (DOCS/AUTHORS). Don't worry, he is as bad with english as you. ;) -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From mgraffam at idsi.net Mon Jul 9 18:37:16 2001 From: mgraffam at idsi.net (mgraffam at idsi.net) Date: Mon, 9 Jul 2001 12:37:16 -0400 (EDT) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <20010709182103.B15302@woodstock.localdomain> Message-ID: On Mon, 9 Jul 2001, Gabucino wrote: > It's the Question that drives us, Nick Kurshev : > > IMHO it's still one reason to remove l3codeca.acm from mplayer same as all > > win32 stuff in the future, isn't? > Why do you hate it so much? Did it kill your dog? It should be as optional > as libavcodec is now. Or I dunno. Well, personally I'd like to see Linux native code for every codec, without appeal to MS DLLs for the simple fact that I support Free Software. That reason alone is sufficient. -- Michael Graffam (mgraffam at idsi.net) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Mon Jul 9 18:35:27 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Mon, 9 Jul 2001 18:35:27 +0200 (CEST) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <20010709182103.B15302@woodstock.localdomain> Message-ID: Hmm, I have been under big stress so I don't really get it. what's the story with this native divx codec? wasn't OpenDivX the project to create such codec? only problem is that it's not realy open source/free software, very slow and have problems with quality. And now you come out with something, tell us that it's native divx codec and d'ah! Where did it come from? Haven't Mayo projects guyes spend all the time and developers on producing sth like that? And haven't they given loads of interviews and such? How dare you come up with something like that out of nowhere? Does this mean that non-intel mplayer (what was it called?) is going to have functional divx? -- Dariusz Pietrzak To ja! Bolko z Sieroci?ca! _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Mon Jul 9 19:41:59 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Mon, 9 Jul 2001 19:41:59 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: ; from dariush@ajax.umcs.lublin.pl on Mon, Jul 09, 2001 at 06:35:27PM +0200 References: <20010709182103.B15302@woodstock.localdomain> Message-ID: <20010709194158.A15666@woodstock.localdomain> It's the Question that drives us, Dariusz Pietrzak : > Does this mean that non-intel mplayer (what was it called?) is going to > have functional divx? RTFM mplayer homepage Yes, it's _THE_ DivX codec, and has _nothing_ to do with OpenDivX. Apart from the fact that libavcodec contains both. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From gabucino at k2.jozsef.kando.hu Mon Jul 9 19:45:40 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Mon, 9 Jul 2001 19:45:40 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: ; from mgraffam@idsi.net on Mon, Jul 09, 2001 at 12:37:16PM -0400 References: <20010709182103.B15302@woodstock.localdomain> Message-ID: <20010709194540.B15666@woodstock.localdomain> It's the Question that drives us, mgraffam at idsi.net : > Well, personally I'd like to see Linux native code for every codec, > without appeal to MS DLLs for the simple fact that I support Free > Software. Ehh. So let's remove win32 support, together with Indeo*, hardware codecs, mpeg4v2, wmv7. Let's remove ASF support too then. Let's use smpeg. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From mgraffam at idsi.net Mon Jul 9 19:50:02 2001 From: mgraffam at idsi.net (mgraffam at idsi.net) Date: Mon, 9 Jul 2001 13:50:02 -0400 (EDT) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <20010709194540.B15666@woodstock.localdomain> Message-ID: On Mon, 9 Jul 2001, Gabucino wrote: > It's the Question that drives us, mgraffam at idsi.net : > > Well, personally I'd like to see Linux native code for every codec, > > without appeal to MS DLLs for the simple fact that I support Free > > Software. > Ehh. So let's remove win32 support, together with Indeo*, hardware > codecs, mpeg4v2, wmv7. Let's remove ASF support too then. > Let's use smpeg. Your logic is seriously flawed in that you are fighting a straw man. I never said I preferred to have NO ability to play these formats under Linux. I said I'd prefer NATIVE support. You are mis-representing my position. I don't see the name Richard M. Stallman in my email header. I support REPLACING Windows codecs with Linux-native code. Having the ability to load a Windows DLL is important for a new codec that comes out before native support is developed. Developing native support is still important though. -- Michael Graffam (mgraffam at idsi.net) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Mon Jul 9 20:11:34 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Mon, 9 Jul 2001 20:11:34 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: ; from mgraffam@idsi.net on Mon, Jul 09, 2001 at 01:50:02PM -0400 References: <20010709194540.B15666@woodstock.localdomain> Message-ID: <20010709201133.A15782@woodstock.localdomain> It's the Question that drives us, mgraffam at idsi.net : > I support REPLACING Windows codecs with Linux-native code. Having the Ofcoz. But since there is no other way right now (support xanim plugins? why? well maybe for 3ivx.. but anyway it would be the same as supporting DLLs), all discussion about removing win32 is vain. And the biggest problem about supporting win32 is our hatred towards M$, not their (in)efficiency. > Developing native support is still important though. Yes. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From eungkyu at sparcs.org Mon Jul 9 22:11:09 2001 From: eungkyu at sparcs.org (Eungkyu Song) Date: Tue, 10 Jul 2001 05:11:09 +0900 Subject: [Mplayer-users] BUGS: fullscreen mode Message-ID: <20010710051109.A7131@sparcs.org> I'm using Pentium III 500 and 3dfx voodoo3 2000 with XFree86 4.1.0. When I play movie with '-vo xv -fs' option, movie display is located in invalid position (not 0,0). I have screenshot. What's the problem? http://www.sparcs.org/~eungkyu/misc/mplayer.jpg -- ___ _ Dept. of C.S. in KAIST, Member of SPARCS. | __| _ _ _ __ _| |___ _ _ _ http://cs.kaist.ac.kr/ | _| || | ' `/ _` | / / || | || | http://www.sparcs.org/ |___`_,_|_||_`__, |_`_``_, |`_,_| @sparcs.org |___/ |__/ http://www.sparcs.org/~eungkyu/ _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Mon Jul 9 20:18:55 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Mon, 9 Jul 2001 20:18:55 +0200 Subject: [Mplayer-users] artsd support? In-Reply-To: <20010709135003.A18316@rosalind.local> References: <20010709135003.A18316@rosalind.local> Message-ID: <3325036380.20010709201855@gmx.de> Hello Moritz, Monday, July 09, 2001, 1:50:03 PM, you wrote: MMH> Hi, I checked out mplayer for the first time and like it A LOT. Nice error MMH> handling, better than avifile and a lot faster, too. Great! Thanks! MMH> My only problem ATM is the missing arts support. Does anyone know if such a MMH> thing is planned? MMH> I heard that some Mplayer devlopers have a dislike for KDE, but artsd is the MMH> coming standard for Gnome-2.0, too, so support should really be MMH> considered. try artsdsp mplayer [options] -ao sdl or mplayer -ao sdl:arts (when sdl is compiled with arts support) MMH> (Please CC: me, I am not subscribed to the list) Bad Luck :-P we won't cc -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Tue Jul 10 01:30:05 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Tue, 10 Jul 2001 01:30:05 +0200 Subject: [Mplayer-users] artsd support? In-Reply-To: <3325036380.20010709201855@gmx.de>; from atmosfear@users.sourceforge.net on Mon, Jul 09, 2001 at 08:18:55PM +0200 References: <20010709135003.A18316@rosalind.local> <3325036380.20010709201855@gmx.de> Message-ID: <20010710013005.A19806@woodstock.localdomain> It's the Question that drives us, Felix B?nemann : > Bad Luck :-P atmos rulz :)) -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From nickols_k at mail.ru Tue Jul 10 11:58:05 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Tue, 10 Jul 2001 09:58:05 +0000 (:) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <20010709182103.B15302@woodstock.localdomain> Message-ID: Hi, Gabucino! On 2001-07-09 18:21:03 you wrote: >It's the Question that drives us, Nick Kurshev : >> IMHO it's still one reason to remove l3codeca.acm from mplayer same as all >> win32 stuff in the future, isn't? >Why do you hate it so much? Did it kill your dog? It should be as optional >as libavcodec is now. Or I dunno. Hatred is not correct word in this situation. My personal relationship with M$ don't matter. Simply mplayer has NATIVE codecs. Those CODECS are much fast of windoz's. NATIVE codecs are called by default. So question: who needs with it dead goods (from mplayer point, of course)? Why users should download these large archives when mplayer contains buildin-OSF-GPL'ed competitors which already win them? Who going to use those codecs? I never said about removing win32 stuff entire for the now. But in the future - when native codecs will come in. For the now I have mpeg1, mpeg2, divx-mpeg4, ac3, mp3 codecs as native. In general I can remove all win32 support locally on my computer since they cover all my needs. (Of course sometime mplayer uses divx audio support of which still is not implemented as open source codecs - but only rare .avis contain such streams) MPlayer could lost so much unnecessary stuffs: wine, dshow, vfw, ... and be much faster without emulators. Best regards! Nick (2001-07-10 09:44:04) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Tue Jul 10 12:07:50 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Tue, 10 Jul 2001 10:07:50 +0000 (:) Subject: [Mplayer-users] Benchmarks Message-ID: Hello, Arpi! Probably I have a stupid questions but IMHO mplayer needs RTFM benchmark. Yestoday I've done some minor optimization of native ffmpeg-divx codec. These results I get: Before: BENCHMARKs: V: 9.406s VO: 1.421s A: 0.600s Sys: 34.003s = 45.429s BENCHMARK%: V: 20.7046% VO: 3.1270% A: 1.3208% Sys: 74.8477% = 100.0000% After: BENCHMARKs: V: 9.280s VO: 1.397s A: 0.593s Sys: 34.153s = 45.424s BENCHMARK%: V: 20.4299% VO: 3.0761% A: 1.3063% Sys: 75.1877% = 100.0000% Could you explain me: what's difference between first string and second? Why Systime always 100%? What means 's' suffix in the first string. Why VO is changed too? Where AO time? Does 'V' include 'VO'? Thanks! Best regards! Nick _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From steve at daviesfam.org Tue Jul 10 09:51:41 2001 From: steve at daviesfam.org (Stephen Davies) Date: Tue, 10 Jul 2001 08:51:41 +0100 (BST) Subject: [Mplayer-users] Benchmarks In-Reply-To: Message-ID: On Tue, 10 Jul 2001, Nick Kurshev wrote: > Before: > BENCHMARKs: V: 9.406s VO: 1.421s A: 0.600s Sys: 34.003s = 45.429s > BENCHMARK%: V: 20.7046% VO: 3.1270% A: 1.3208% Sys: 74.8477% = 100.0000% > > After: > BENCHMARKs: V: 9.280s VO: 1.397s A: 0.593s Sys: 34.153s = 45.424s > BENCHMARK%: V: 20.4299% VO: 3.0761% A: 1.3063% Sys: 75.1877% = 100.0000% > > Could you explain me: what's difference between first string and second? > Why Systime always 100%? What means 's' suffix in the first string. > Why VO is changed too? Where AO time? Does 'V' include 'VO'? Hi, To contribute from me answers instead of questions for a change: "s" stands for seconds. The second line shows the percentage split of where the time went (consequently the last is 100% - cos its _all_ the time) Why did V/VO time change: I guess the measurement isn't perfectly precise; I'd recommend that you run each benchmark several times and average the results. Regards, Steve Davies _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Tue Jul 10 10:00:10 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Tue, 10 Jul 2001 10:00:10 +0200 Subject: [Mplayer-users] Benchmarks In-Reply-To: References: Message-ID: <20010710100010.A8349@hoth.amu.edu.pl> On Tue, Jul 10, 2001 at 10:07:50AM +0000, Nick Kurshev wrote: > Hello, Arpi! > > Probably I have a stupid questions but IMHO mplayer needs RTFM benchmark. > Yestoday I've done some minor optimization of native ffmpeg-divx codec. > These results I get: > > Before: > BENCHMARKs: V: 9.406s VO: 1.421s A: 0.600s Sys: 34.003s = 45.429s > BENCHMARK%: V: 20.7046% VO: 3.1270% A: 1.3208% Sys: 74.8477% = 100.0000% > > After: > BENCHMARKs: V: 9.280s VO: 1.397s A: 0.593s Sys: 34.153s = 45.424s > BENCHMARK%: V: 20.4299% VO: 3.0761% A: 1.3063% Sys: 75.1877% = 100.0000% > > Could you explain me: what's difference between first string and second? > Why Systime always 100%? What means 's' suffix in the first string. > Why VO is changed too? Where AO time? Does 'V' include 'VO'? s=seconds systime = 74.8477% and 75.1877% (100% == total) Why precicion is differ? s=3 digits %=4 digits my results: P750 + TNT2 + vo:X11 Hanninal trailer: VIDEO: [DIV3] 480x260 24bpp 24.00 fps 185.7 kbps (22.7 kbyte/s) before: BENCHMARKs: V: 14.534s VO: 5.026s A: 0.000s Sys: 8.135s = 27.695s BENCHMARK%: V: 52.4799% VO: 18.1463% A: 0.0000% Sys: 29.3738% = 100.0000% after: BENCHMARKs: V: 14.259s VO: 4.931s A: 0.000s Sys: 8.393s = 27.583s BENCHMARK%: V: 51.6945% VO: 17.8780% A: 0.0000% Sys: 30.4275% = 100.0000% Wing Commander trailer: VIDEO: [DIV3] 640x360 24bpp 24.00 fps 846.9 kbps (103.4 kbyte/s) before: BENCHMARKs: V: 15.274s VO: 4.793s A: 0.000s Sys: 5.528s = 25.595s BENCHMARK%: V: 59.6778% VO: 18.7256% A: 0.0000% Sys: 21.5967% = 100.0000% after: BENCHMARKs: V: 14.459s VO: 4.787s A: 0.000s Sys: 5.637s = 24.883s BENCHMARK%: V: 58.1083% VO: 19.2390% A: 0.0000% Sys: 22.6527% = 100.0000% Matrix trailer: VIDEO: [DIV3] 640x480 24bpp 23.98 fps 960.6 kbps (117.3 kbyte/s) before: BENCHMARKs: V: 45.525s VO: 16.432s A: 0.000s Sys: 17.806s = 79.763s BENCHMARK%: V: 57.0754% VO: 20.6008% A: 0.0000% Sys: 22.3237% = 100.0000% after: BENCHMARKs: V: 43.348s VO: 16.389s A: 0.000s Sys: 18.290s = 78.027s BENCHMARK%: V: 55.5552% VO: 21.0041% A: 0.0000% Sys: 23.4407% = 100.0000% Best Regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From mlist at reinikainen.net Tue Jul 10 10:43:58 2001 From: mlist at reinikainen.net (Jani Reinikainen) Date: Tue, 10 Jul 2001 11:43:58 +0300 Subject: [Mplayer-users] Problem compiling MPlayer-0.18pre4 on Debian Sid Message-ID: <3B4AC04E.4000407@reinikainen.net> I get these errors while running 'make': gcc: installation problem, cannot exec `cc1plus': No such file or directory In file included from DS_AudioDec.cpp:15: except.h:10: iostream: No such file or directory except.h:11: cstring: No such file or directory DS_AudioDec.cpp:27: strstream: No such file or directory In file included from outputpin.h:8, from DS_Filter.h:6, from DS_AudioDec.cpp:37: allocator.h:6: list: No such file or directory In file included from DS_AudioDec.cpp:37: DS_Filter.h:7: string: No such file or directory DS_AudioDec.cpp:41: string: No such file or directory cpp0: output pipe has been closed make[1]: *** [DS_AudioDec.o] Error 1 make[1]: Leaving directory `/home/atanos/MPlayer-0.18pre4/loader/DirectShow' make: *** [loader/DirectShow/libDS_Filter.a] Error 2 Here is also the output of './configure': ----------------------------------------- You can get detailed help on configure with: ./configure --help Please wait while ./configure discovers your software and hardware environment! Checking version of gcc ... 2.95.4, ok GL includes not found! Checking assembler (as) ... 2.11.90.0.7, ok Checking Linux kernel version ... 2.4.6, ok Install prefix: /usr/local Checking for cpu vendor ... GenuineIntel ( 6:7:3 ) Checking for cpu type ... Pentium III (Katmai) Optimizing to ... i686 Checking for mmx support ... yes Checking for mmx2 support ... yes Checking for 3dnow support ... no Checking for 3dnowex support ... no Checking for sse support ... yes Checking for mtrr support ... yes Screen size ... 1x1 Checking for X11 libs ... -L/usr/X11R6/lib Checking for X11 headers ... Checking mga_vid device ... yes Checking for xmga ... yes Checking for SDL ... no Checking for GGI ... no Checking for OpenGL ... no Checking for Xv ... yes Checking for X11 ... yes Checking for DGA ... yes Checking for DGA 2.0 .. yes Checking for Xf86VM ... yes Checking for SVGAlib ... no Checking for FBDev ... yes Checking for OSS Audio ... yes Checking for ALSA Audio ... no Checking for ESD Audio ... no Checking for Sun Audio ... no Checking for DeCSS support ... no Checking for PNG support ... no Checking for DirectShow ... yes Checking for libavcodec ... yes Checking for fastmemcpy ... yes Extra libs : -L/usr/local/lib Extra headers : -I/usr/local/include Creating config.h Creating config.mak Creating libvo/config.mak Creating libao2/config.mak Config files successfully generated by ./configure ! Please check config.h and config.mak files, tune CPU and optimization flags if you don't like these defaults. You can compile the program with 'make' and install with 'make install'. Good luck! Please check mtrr settings at /proc/mtrr (see DOCS/MTRR) Ok, found Win32 codecs directory at /usr/lib/win32. ----------------------------------------- Am I missing some packages? _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Tue Jul 10 11:31:22 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Tue, 10 Jul 2001 11:31:22 +0200 Subject: [Mplayer-users] Problem compiling MPlayer-0.18pre4 on Debian Sid In-Reply-To: <3B4AC04E.4000407@reinikainen.net> References: <3B4AC04E.4000407@reinikainen.net> Message-ID: <12279782691.20010710113122@gmx.de> Hello Jani, Tuesday, July 10, 2001, 10:43:58 AM, you wrote: JR> I get these errors while running 'make': JR> gcc: installation problem, cannot exec `cc1plus': No such file or directory [snip] JR> Am I missing some packages? Yes, a C++ compiler, install gpp binary package or compile gcc with --enable-languages=c,c++ -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Tue Jul 10 11:29:43 2001 From: atmosfear at users.sourceforge.net (=?koi8-r?B?RmVsaXggQthuZW1hbm4=?=) Date: Tue, 10 Jul 2001 11:29:43 +0200 Subject: [Mplayer-users] Benchmarks In-Reply-To: References: Message-ID: <5379683959.20010710112943@gmx.de> Hello Nick, Tuesday, July 10, 2001, 12:07:50 PM, you wrote: NK> Hello, Arpi! NK> Probably I have a stupid questions but IMHO mplayer needs RTFM benchmark. NK> Yestoday I've done some minor optimization of native ffmpeg-divx codec. NK> These results I get: NK> Before: NK> BENCHMARKs: V: 9.406s VO: 1.421s A: 0.600s Sys: 34.003s = 45.429s NK> BENCHMARK%: V: 20.7046% VO: 3.1270% A: 1.3208% Sys: 74.8477% = 100.0000% NK> After: NK> BENCHMARKs: V: 9.280s VO: 1.397s A: 0.593s Sys: 34.153s = 45.424s NK> BENCHMARK%: V: 20.4299% VO: 3.0761% A: 1.3063% Sys: 75.1877% = 100.0000% NK> Could you explain me: what's difference between first string and second? NK> Why Systime always 100%? What means 's' suffix in the first string. it's total percentage and always 100% of course, systime includes also idle calls of course so if other percentages go down, systime will go up (at least if ya play with sound). s suffic imo means seconds. NK> Why VO is changed too? Where AO time? Does 'V' include 'VO'? VO time is time dneeded by vo plugin to display image (there can also be extra systime spend for it not shown in there) and V doesn't include VO, think AO isn't calculated cause audio device cpu time is very minimal. NK> Thanks! NK> Best regards! Nick -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Mon Jul 9 22:55:23 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Mon, 9 Jul 2001 22:55:23 +0200 Subject: [Mplayer-users] BUGS: fullscreen mode In-Reply-To: <20010710051109.A7131@sparcs.org> References: <20010710051109.A7131@sparcs.org> Message-ID: <17534424129.20010709225523@gmx.de> Hello Eungkyu, Monday, July 09, 2001, 10:11:09 PM, you wrote: ES> I'm using Pentium III 500 and 3dfx voodoo3 2000 with XFree86 4.1.0. ES> When I play movie with '-vo xv -fs' option, ES> movie display is located in invalid position (not 0,0). ES> I have screenshot. ES> What's the problem? grab current cvs and try with mplayer -fsmode x where x is an integer between 0 and 7 ES> http://www.sparcs.org/~eungkyu/misc/mplayer.jpg -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From creppy at freemail.hu Tue Jul 10 14:19:29 2001 From: creppy at freemail.hu (Creepy) Date: Tue, 10 Jul 2001 14:19:29 +0200 Subject: [Mplayer-users] BugCounter-debian Message-ID: <003201c1093a$9154c710$8cd03c86@informatik.uniulm.de> Anybody got BugCounter with Debian work? I got 0.17 IdegCounter work but not the newest 0.18. After installing the deb(built with d?kg-buildpackage), I get the error: post-install error 10. Any Idea? I need this stuff guys! :)) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Tue Jul 10 14:22:44 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Tue, 10 Jul 2001 14:22:44 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: ; from nickols_k@mail.ru on Tue, Jul 10, 2001 at 09:58:05AM +0000 References: <20010709182103.B15302@woodstock.localdomain> Message-ID: <20010710142244.A22018@woodstock.localdomain> It's the Question that drives us, Nick Kurshev : > Why users should download these large archives when mplayer contains Large? It's downloading fast even on my 14.4 modem (yes.) . > I never said about removing win32 stuff entire for the now. > But in the future - when native codecs will come in. Of course. But it's as unlikely as M$ sends us WMV8 sources for example. > In general I can remove all win32 support locally on my computer since they And when you encounter an Indeo5/WMV7 AVI, you'll recompile. Well, it's up to you. Or: compile two binaries, 'mplayer' and 'mplayer-win32' . Great, eh? :/ > (Of course sometime mplayer uses divx audio support of which still is not > implemented as open source codecs - but only rare .avis contain such streams) No. For example a very significant amount of anime on the net (and some of mine) contain DivXa. > MPlayer could lost so much unnecessary stuffs: wine, dshow, vfw, ... and be > much faster without emulators. It wouldn't be faster, only the binary would be smaller. As far as I know. Use UPX :) Will you answer to such mails : "WTF, mplayer doesn't even play Indeo !" (oh well, RTFM :) -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From dariush at ajax.umcs.lublin.pl Tue Jul 10 14:28:39 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Tue, 10 Jul 2001 14:28:39 +0200 (CEST) Subject: [Mplayer-users] BugCounter-debian In-Reply-To: <003201c1093a$9154c710$8cd03c86@informatik.uniulm.de> Message-ID: > Anybody got BugCounter with Debian work? I got 0.17 IdegCounter work but not > the newest 0.18. After installing the deb(built with d?kg-buildpackage), I I've got. > get the error: post-install error 10. > Any Idea? I just checked that. Although it works merilly on all the machines i've tested it, I saw the same effect on some fresh machine. It has something to do with debconf, which I don't understand yet. As a temporary fix - rm debian/postinst and then rerun debian/rules binary It's not that important, it only creates global /etc/mplayer.conf.(postinst) -- Dariusz Pietrzak To ja! Bolko z Sieroci?ca! _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From luca at lucarella.com.ar Tue Jul 10 17:42:05 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Tue, 10 Jul 2001 12:42:05 -0300 (ART) Subject: [Mplayer-users] BugCounter-debian In-Reply-To: <003201c1093a$9154c710$8cd03c86@informatik.uniulm.de> References: <003201c1093a$9154c710$8cd03c86@informatik.uniulm.de> Message-ID: <200107101659.MAA09804@burns.luca.2y.net> El Tue, 10 Jul 2001 14:19:29 +0200 Creepy escribi?: C> Anybody got BugCounter with Debian work? I got 0.17 IdegCounter work but not C> the newest 0.18. After installing the deb(built with d?kg-buildpackage), I C> get the error: post-install error 10. C> Any Idea? C> I need this stuff guys! :)) yep, got the same problem. I "fix" it by editing the the postinstall script ('dpkg --configure mplayer' to see where is the script), and deleted the debconf stuff and all the lines that returned an error. then run dpkg --configure mplayer agin and that's all. I don't know if this is a good thing to do but it works for me... ;) -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From pode at tut.fi Tue Jul 10 19:07:57 2001 From: pode at tut.fi (Juha Poutiainen) Date: Tue, 10 Jul 2001 20:07:57 +0300 Subject: [Mplayer-users] fullscreen mode in -vo sdl Message-ID: <200107101707.UAA05220@vahti.cc.tut.fi> Hi At the moment, if running 'mplayer -vo sdl file' and switching to fullscreen by pressing 'f', it seems to go to fullscreen in a way like when using '-zoom'. That makes it to change screenmode, which is unnecessary, when Xv is available. So.. is there any way to make default screenmode to be the same as the current screenmode in X. It feels annoying to change fullscreen resolution every time. I want to use highest available resolution available, because it looks better, and doesn't make it any slower anyway. And I know one workaround would be to remove all lower screenmodes from XFree's config, but for other reasons I don't want to do that. I like to use sdl output (instead of Xv), because it's the only way to go to fullscreen and back to window, while playing. Thanks. and even as this is not a bugreport (I think :), I put info of my system here, (if it does matter...): System Distr. : Debian unstable (updated daily) Kernel : 2.4.6 (source from debian, custom compil.) libc : 2.2.3 X version : 4.1.0 (4.1.0-0pre1v3 branden's .deb's) gcc : gcc version 2.95.4 20010703 (Debian prerelease) ld : GNU ld version 2.11.90.0.7 (with BFD 2.11.90.0.7) mplayer : MPlayer 0.17cvs-010710-19:08 Hardware CPU : Intel CeleronII 800MHz (not overclocked) vidcard : Hercules ProphetII pro (gf2pro 64MB ddr) vid driver: NVidia's binary driver 1.0-1251 (nvagp @ 2x) snd card : Creative SB64PCI (OSS drivers from kernel) -- * Juha Poutiainen _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Tue Jul 10 19:23:21 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Tue, 10 Jul 2001 19:23:21 +0200 Subject: [Mplayer-users] fullscreen mode in -vo sdl In-Reply-To: <200107101707.UAA05220@vahti.cc.tut.fi> References: <200107101707.UAA05220@vahti.cc.tut.fi> Message-ID: <160108102132.20010710192321@gmx.de> Hello Juha, Tuesday, July 10, 2001, 7:07:57 PM, you wrote: JP> Hi JP> At the moment, if running 'mplayer -vo sdl file' and switching to JP> fullscreen by pressing 'f', it seems to go to fullscreen in a way like JP> when using '-zoom'. That makes it to change screenmode, which is JP> unnecessary, when Xv is available. JP> So.. is there any way to make default screenmode to be the same as the JP> current screenmode in X. JP> It feels annoying to change fullscreen resolution every time. I want JP> to use highest available resolution available, because it looks JP> better, and doesn't make it any slower anyway. And I know one JP> workaround would be to remove all lower screenmodes from XFree's JP> config, but for other reasons I don't want to do that. I like to use JP> sdl output (instead of Xv), because it's the only way to go to JP> fullscreen and back to window, while playing. JP> Thanks. -fs on commandline should do the job. JP> -- JP> * Juha Poutiainen -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From pode at tut.fi Tue Jul 10 19:51:03 2001 From: pode at tut.fi (Juha Poutiainen) Date: Tue, 10 Jul 2001 20:51:03 +0300 Subject: [Mplayer-users] fullscreen mode in -vo sdl In-Reply-To: <160108102132.20010710192321@gmx.de> References: <200107101707.UAA05220@vahti.cc.tut.fi> <160108102132.20010710192321@gmx.de> Message-ID: <200107101751.UAA06209@vahti.cc.tut.fi> JP>> So.. is there any way to make default screenmode to be the same as the JP>> current screenmode in X. > -fs on commandline should do the job. ..But it does only partly :( 1. It then loses the default window size (mine is 800x600), and makes window to default to same size that the picture was in fullscreen. 2. It makes aspect ratio to go wrong, like when watching svcd files (.m2v 480x480 mpeg2) it makes it square , and it should be at normal aspect ratio (4:3). 3. I'd like it to start in window -- * Juha Poutiainen _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 10 19:49:45 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 10 Jul 2001 19:49:45 +0200 (CEST) Subject: [Mplayer-users] 0.18pre4 released with native divx codec In-Reply-To: Message-ID: <200107101749.TAA25358@thot.banki.hu> Hi, > On Mon, 9 Jul 2001, Gabucino wrote: > > > It's the Question that drives us, Nick Kurshev : > > > IMHO it's still one reason to remove l3codeca.acm from mplayer same as all > > > win32 stuff in the future, isn't? > > Why do you hate it so much? Did it kill your dog? It should be as optional > > as libavcodec is now. Or I dunno. > > Well, personally I'd like to see Linux native code for every codec, > without appeal to MS DLLs for the simple fact that I support Free > Software. > yes, but who has opensource codec for indeo 5, windows media 7,8 etc? divx is a single step, but there will be always formats with dll only codec A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 10 19:55:56 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 10 Jul 2001 19:55:56 +0200 (CEST) Subject: [Mplayer-users] 0.18pre4 released with native divx codec In-Reply-To: Message-ID: <200107101755.TAA38490@thot.banki.hu> Hi, > Hmm, > I have been under big stress so I don't really get it. > > what's the story with this native divx codec? > > wasn't OpenDivX the project to create such codec? only problem is that > it's not realy open source/free software, very slow and have problems with > quality. they develop something new, not compatible with the well-known divx format. btw their stuff is good, yes, it's slow, but quality is good imho. > And now you come out with something, tell us that it's native divx codec > and d'ah! Where did it come from? Gerard Lantau, the ffmpeg developer. he wrote a small prog which grab and stream to all known movie formats using mpeg 1, opendigx, h263 and other formats. now he added decoding and msmpeg4 *aka divx) support. > Haven't Mayo projects guyes spend all the time and developers on producing > sth like that? And haven't they given loads of interviews and such? > How dare you come up with something like that out of nowhere? they are hard working on that, including the new divx, and the compatible decoder, but it is not public yet because of legal issues :( > Does this mean that non-intel mplayer (what was it called?) is going to > have functional divx? yes! A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 10 19:57:19 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 10 Jul 2001 19:57:19 +0200 (CEST) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <20010709194540.B15666@woodstock.localdomain> Message-ID: <200107101757.TAA14526@thot.banki.hu> Hi, > It's the Question that drives us, mgraffam at idsi.net : > > Well, personally I'd like to see Linux native code for every codec, > > without appeal to MS DLLs for the simple fact that I support Free > > Software. > Ehh. So let's remove win32 support, together with Indeo*, hardware > codecs, mpeg4v2, wmv7. Let's remove ASF support too then. > Let's use smpeg. > ehh... don't be IDEG :) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 10 20:20:14 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 10 Jul 2001 20:20:14 +0200 (CEST) Subject: [Mplayer-users] Benchmarks In-Reply-To: Message-ID: <200107101820.UAA38504@thot.banki.hu> Hi, > Probably I have a stupid questions but IMHO mplayer needs RTFM benchmark. > Yestoday I've done some minor optimization of native ffmpeg-divx codec. > These results I get: > > Before: > BENCHMARKs: V: 9.406s VO: 1.421s A: 0.600s Sys: 34.003s = 45.429s > BENCHMARK%: V: 20.7046% VO: 3.1270% A: 1.3208% Sys: 74.8477% = 100.0000% > > After: > BENCHMARKs: V: 9.280s VO: 1.397s A: 0.593s Sys: 34.153s = 45.424s > BENCHMARK%: V: 20.4299% VO: 3.0761% A: 1.3063% Sys: 75.1877% = 100.0000% > > Could you explain me: what's difference between first string and second? > Why Systime always 100%? What means 's' suffix in the first string. > Why VO is changed too? Where AO time? Does 'V' include 'VO'? > % means percent, s means second. the 100% at end of line is teh summary. it's always 100% :) sys tim is time spend in usleep() or disk i/o or audio waiting or demuxer. V: is the percent/time used by video codec. CO is used by libvo, and A is the time used by audio codec. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 10 20:25:26 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 10 Jul 2001 20:25:26 +0200 (CEST) Subject: [Mplayer-users] Benchmarks In-Reply-To: Message-ID: <200107101825.UAA38478@thot.banki.hu> Hi, > Why did V/VO time change: I guess the measurement isn't perfectly precise; yes :( > I'd recommend that you run each benchmark several times and average the > results. and do not run other cpu-eating programs while benchmarking. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 10 20:28:01 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 10 Jul 2001 20:28:01 +0200 (CEST) Subject: [Mplayer-users] Benchmarks In-Reply-To: <5379683959.20010710112943@gmx.de> Message-ID: <200107101828.UAA10688@thot.banki.hu> Hi, but for libmpeg2, V: includes time spent by video blitting, and vo covers only page flipping. for the other codecs v: contains only video decoding, and vo contains blit + flip. > Hello Nick, > > Tuesday, July 10, 2001, 12:07:50 PM, you wrote: > > NK> Hello, Arpi! > > NK> Probably I have a stupid questions but IMHO mplayer needs RTFM benchmark. > NK> Yestoday I've done some minor optimization of native ffmpeg-divx codec. > NK> These results I get: > > NK> Before: > NK> BENCHMARKs: V: 9.406s VO: 1.421s A: 0.600s Sys: 34.003s = 45.429s > NK> BENCHMARK%: V: 20.7046% VO: 3.1270% A: 1.3208% Sys: 74.8477% = 100.0000% > > NK> After: > NK> BENCHMARKs: V: 9.280s VO: 1.397s A: 0.593s Sys: 34.153s = 45.424s > NK> BENCHMARK%: V: 20.4299% VO: 3.0761% A: 1.3063% Sys: 75.1877% = 100.0000% > > NK> Could you explain me: what's difference between first string and second? > NK> Why Systime always 100%? What means 's' suffix in the first string. > it's total percentage and always 100% of course, systime includes also > idle calls of course so if other percentages go down, systime will go > up (at least if ya play with sound). s suffic imo means seconds. > NK> Why VO is changed too? Where AO time? Does 'V' include 'VO'? > VO time is time dneeded by vo plugin to display image (there can also > be extra systime spend for it not shown in there) and V doesn't > include VO, think AO isn't calculated cause audio device cpu time is > very minimal. > > NK> Thanks! > > NK> Best regards! Nick > > > -- > Best regards, > Felix mailto:atmosfear at users.sourceforge.net > > > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Tue Jul 10 20:32:15 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Tue, 10 Jul 2001 20:32:15 +0200 Subject: [Mplayer-users] fullscreen mode in -vo sdl In-Reply-To: <200107101751.UAA06209@vahti.cc.tut.fi> References: <200107101707.UAA05220@vahti.cc.tut.fi> <160108102132.20010710192321@gmx.de> <200107101751.UAA06209@vahti.cc.tut.fi> Message-ID: <126112235826.20010710203215@gmx.de> Hello Juha, Tuesday, July 10, 2001, 7:51:03 PM, you wrote: JP>>> So.. is there any way to make default screenmode to be the same JP> as the JP>>> current screenmode in X. >> -fs on commandline should do the job. JP> ..But it does only partly :( JP> 1. It then loses the default window size (mine is 800x600), and makes JP> window to default to same size that the picture was in fullscreen. JP> 2. It makes aspect ratio to go wrong, like when watching svcd files JP> (.m2v 480x480 mpeg2) it makes it square , and it should be at normal JP> aspect ratio (4:3). If I understand correct you use -x and -y but these values are (or at least weren't, haven't checked recently) passed to vo plugin but current screen res from X is passed as x and y value, so I can't get requested sizes. JP> 3. I'd like it to start in window hmm then cycle to your res with C key. JP> -- JP> * Juha Poutiainen -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From tcwitte at wish.net Tue Jul 10 20:37:04 2001 From: tcwitte at wish.net (Taco Witte) Date: Tue, 10 Jul 2001 20:37:04 +0200 Subject: [Mplayer-users] Problem compiling MPlayer-0.18pre4 on Debian Sid References: <3B4AC04E.4000407@reinikainen.net> <12279782691.20010710113122@gmx.de> Message-ID: <3B4B4B50.30200@wish.net> Felix B?nemann wrote: > Hello Jani, > > Tuesday, July 10, 2001, 10:43:58 AM, you wrote: > > JR> I get these errors while running 'make': > > JR> gcc: installation problem, cannot exec `cc1plus': No such file or directory > [snip] > JR> Am I missing some packages? > Yes, a C++ compiler, install gpp binary package or compile gcc with > --enable-languages=c,c++ Maybe a gpp test should be added to configure? With regards, Taco Witte _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 10 20:41:12 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 10 Jul 2001 20:41:12 +0200 (CEST) Subject: [Mplayer-users] Problem compiling MPlayer-0.18pre4 on Debian Sid In-Reply-To: <3B4B4B50.30200@wish.net> Message-ID: <200107101841.UAA42948@thot.banki.hu> Hi, > > > > JR> gcc: installation problem, cannot exec `cc1plus': No such file or directory > > [snip] > > JR> Am I missing some packages? > > Yes, a C++ compiler, install gpp binary package or compile gcc with > > --enable-languages=c,c++ > Maybe a gpp test should be added to configure? yes. and also some tests for nasm and other requirements of libavcodec. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Tue Jul 10 21:00:39 2001 From: kinali at gmx.net (Attila Kinali) Date: Tue, 10 Jul 2001 21:00:39 +0200 Subject: [Mplayer-users] BUGS: fullscreen mode In-Reply-To: <17534424129.20010709225523@gmx.de> References: <20010710051109.A7131@sparcs.org> <17534424129.20010709225523@gmx.de> Message-ID: On Mon, 9 Jul 2001 22:55:23 +0200 Felix B?nemann wrote: > grab current cvs and try with mplayer -fsmode x where x is an integer > between 0 and 7 I hope this option along with the -vc thing get it into the docs until 0.18 is released. Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Tue Jul 10 21:04:47 2001 From: kinali at gmx.net (Attila Kinali) Date: Tue, 10 Jul 2001 21:04:47 +0200 Subject: [Mplayer-users] Problem compiling MPlayer-0.18pre4 on Debian Sid In-Reply-To: <3B4AC04E.4000407@reinikainen.net> References: <3B4AC04E.4000407@reinikainen.net> Message-ID: On Tue, 10 Jul 2001 11:43:58 +0300 Jani Reinikainen wrote: > gcc: installation problem, cannot exec `cc1plus': No such file or directory apt-get install g++ Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Tue Jul 10 22:34:01 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Tue, 10 Jul 2001 22:34:01 +0200 Subject: [Mplayer-users] BUGS: fullscreen mode In-Reply-To: References: <20010710051109.A7131@sparcs.org> <17534424129.20010709225523@gmx.de> Message-ID: <137119542232.20010710223401@gmx.de> Hello Attila, Tuesday, July 10, 2001, 9:00:39 PM, you wrote: AK> On Mon, 9 Jul 2001 22:55:23 +0200 Felix B?nemann wrote: >> grab current cvs and try with mplayer -fsmode x where x is an integer >> between 0 and 7 AK> I hope this option along with the -vc thing get it into the docs AK> until 0.18 is released. Undocumented features rule =) AK> Attila Kinali -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Wed Jul 11 02:57:16 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Wed, 11 Jul 2001 00:57:16 +0000 (:) Subject: [Mplayer-users] 0.18pre4 released with native divx codec In-Reply-To: <200107101749.TAA25358@thot.banki.hu> Message-ID: Hi, Arpi! On 2001-07-10 19:49:45 you wrote: >> > > IMHO it's still one reason to remove l3codeca.acm from mplayer same as all >> > > win32 stuff in the future, isn't? >> > Why do you hate it so much? Did it kill your dog? It should be as optional >> > as libavcodec is now. Or I dunno. >> >> Well, personally I'd like to see Linux native code for every codec, >> without appeal to MS DLLs for the simple fact that I support Free >> Software. >> >yes, but who has opensource codec for indeo 5, windows media 7,8 etc? >divx is a single step, but there will be always formats with dll only codec > I mean that it would be better remove useless and obsolete parts of win32 stuff, but not win32 stuff entire. Best regards! Nick (2001-07-11 00:55:27) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Wed Jul 11 02:53:52 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Wed, 11 Jul 2001 00:53:52 +0000 (:) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <20010710142244.A22018@woodstock.localdomain> Message-ID: Hi, Gabucino! On 2001-07-10 14:22:44 you wrote: >> I never said about removing win32 stuff entire for the now. >> But in the future - when native codecs will come in. >Of course. But it's as unlikely as M$ sends us WMV8 sources for example. > Why? Lets WMV8 support will be in mplayer as win32 stuff. But l3codeca.acm is dead thing for mplayer and soon divxc32.dll (And I hope that someone will write opensource support for divxa32) I can't find users which would be glad to use win32 codecs to lose frames and dream about upgrading their hardware. (But people are strange creatures so can be everything). > >> In general I can remove all win32 support locally on my computer since they >And when you encounter an Indeo5/WMV7 AVI, you'll recompile. Well, it's up >to you. Or: compile two binaries, 'mplayer' and 'mplayer-win32' . Great, eh? >:/ > Yes! Great idea!!! Gabucino, where you were before? IMHO it's best solution to add --disable-win32 in configure, isn't? (Of course --enable-win32 by default) So mpg12play can be stopped too. > >> (Of course sometime mplayer uses divx audio support of which still is not >> implemented as open source codecs - but only rare .avis contain such streams) >No. For example a very significant amount of anime on the net (and some of >mine) contain DivXa. > For inet toys - maybe. But when I purchase a CDROM with DivX-MSMPEG4 movie I have only mp3 stream (at least in my country). So it's no problem for Russia. > >> MPlayer could lost so much unnecessary stuffs: wine, dshow, vfw, ... and be >> much faster without emulators. >It wouldn't be faster, only the binary would be smaller. As far as I know. >Use UPX :) > >Will you answer to such mails : "WTF, mplayer doesn't even play Indeo !" >(oh well, RTFM :) Probably I have lacks of english, but I mean to remove only part of win32 codecs for now (which has opensource fastest analogs). So mplayer will support and this terrible format aka Intel's Indeo Video. Best regards! Nick (2001-07-11 00:37:16) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Tue Jul 10 23:01:47 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Tue, 10 Jul 2001 23:01:47 +0200 Subject: [Mplayer-users] BUGS: fullscreen mode In-Reply-To: <137119542232.20010710223401@gmx.de>; from atmosfear@users.sourceforge.net on Tue, Jul 10, 2001 at 10:34:01PM +0200 References: <20010710051109.A7131@sparcs.org> <17534424129.20010709225523@gmx.de> <137119542232.20010710223401@gmx.de> Message-ID: <20010710230147.A5053@woodstock.localdomain> It's the Question that drives us, Felix B?nemann : > AK> I hope this option along with the -vc thing get it into the docs > AK> until 0.18 is released. > Undocumented features rule =) Yes :) -fsmode is in a long time ago -vc -ac etc.. i haven't tried yet :) -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From atmosfear at users.sourceforge.net Tue Jul 10 23:31:17 2001 From: atmosfear at users.sourceforge.net (=?koi8-r?B?RmVsaXggQthuZW1hbm4=?=) Date: Tue, 10 Jul 2001 23:31:17 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: References: Message-ID: <149122978103.20010710233117@gmx.de> Hello Nick, Wednesday, July 11, 2001, 2:53:52 AM, you wrote: NK> Hi, Gabucino! NK> On 2001-07-10 14:22:44 you wrote: >>> I never said about removing win32 stuff entire for the now. >>> But in the future - when native codecs will come in. >>Of course. But it's as unlikely as M$ sends us WMV8 sources for example. >> NK> Why? Lets WMV8 support will be in mplayer as win32 stuff. NK> But l3codeca.acm is dead thing for mplayer and soon divxc32.dll NK> (And I hope that someone will write opensource support for divxa32) NK> I can't find users which would be glad to use win32 codecs to NK> lose frames and dream about upgrading their hardware. NK> (But people are strange creatures so can be everything). arg, why argue bout that stuff, leave the choice to the user, l3codec is for exp a nixe implementation of mp3 decoder to compare with output of mp3lib to check for errors and stuff. >> >>> In general I can remove all win32 support locally on my computer since they >>And when you encounter an Indeo5/WMV7 AVI, you'll recompile. Well, it's up >>to you. Or: compile two binaries, 'mplayer' and 'mplayer-win32' . Great, eh? >>:/ >> NK> Yes! Great idea!!! Gabucino, where you were before? NK> IMHO it's best solution to add --disable-win32 in configure, isn't? NK> (Of course --enable-win32 by default) NK> So mpg12play can be stopped too. yes, that's what I thought bould mpg12play from the beginning. >> >>> (Of course sometime mplayer uses divx audio support of which still is not >>> implemented as open source codecs - but only rare .avis contain such streams) >>No. For example a very significant amount of anime on the net (and some of >>mine) contain DivXa. >> NK> For inet toys - maybe. But when I purchase a CDROM with DivX-MSMPEG4 NK> movie I have only mp3 stream (at least in my country). So it's no problem for Russia. In germany you can't divx movies on cdrom, for some certain copyright restrictions =) >> >>> MPlayer could lost so much unnecessary stuffs: wine, dshow, vfw, ... and be >>> much faster without emulators. >>It wouldn't be faster, only the binary would be smaller. As far as I know. >>Use UPX :) >> >>Will you answer to such mails : "WTF, mplayer doesn't even play Indeo !" >>(oh well, RTFM :) NK> Probably I have lacks of english, but I mean to remove only part of win32 NK> codecs for now (which has opensource fastest analogs). So mplayer will support NK> and this terrible format aka Intel's Indeo Video. well read above I'd say leave the choice to the user, but we might think about removing uneeded files from win32 package in the future and only leave codec entries for them in codecs.conf. NK> Best regards! Nick (2001-07-11 00:37:16) -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Tue Jul 10 23:46:27 2001 From: kinali at gmx.net (Attila Kinali) Date: Tue, 10 Jul 2001 23:46:27 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <149122978103.20010710233117@gmx.de> References: <149122978103.20010710233117@gmx.de> Message-ID: On Tue, 10 Jul 2001 23:31:17 +0200 Felix B?nemann wrote: > arg, why argue bout that stuff, leave the choice to the user, l3codec > is for exp a nixe implementation of mp3 decoder to compare with output > of mp3lib to check for errors and stuff. IMHO the best choice. Never force the user to use something :-) Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Tue Jul 10 23:48:51 2001 From: kinali at gmx.net (Attila Kinali) Date: Tue, 10 Jul 2001 23:48:51 +0200 Subject: [Mplayer-users] BUGS: fullscreen mode In-Reply-To: <20010710230147.A5053@woodstock.localdomain> References: <20010710051109.A7131@sparcs.org> <17534424129.20010709225523@gmx.de> <137119542232.20010710223401@gmx.de> <20010710230147.A5053@woodstock.localdomain> Message-ID: On Tue, 10 Jul 2001 23:01:47 +0200 Gabucino wrote: > -fsmode is in a long time ago Hmm.. mplayer.1 gets too big :-) And I'm blind as usual :-( Sorry. Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From luca at lucarella.com.ar Wed Jul 11 00:34:15 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Tue, 10 Jul 2001 19:34:15 -0300 (ART) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: References: <149122978103.20010710233117@gmx.de> Message-ID: <200107102351.TAA10430@burns.luca.2y.net> El Tue, 10 Jul 2001 23:46:27 +0200 Attila Kinali escribi?: AK> On Tue, 10 Jul 2001 23:31:17 +0200 Felix B?nemann wrote: AK> AK> > arg, why argue bout that stuff, leave the choice to the user, l3codec AK> > is for exp a nixe implementation of mp3 decoder to compare with output AK> > of mp3lib to check for errors and stuff. AK> AK> IMHO the best choice. Never force the user to use something :-) AMEN! -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From mlist at reinikainen.net Wed Jul 11 09:46:55 2001 From: mlist at reinikainen.net (Jani Reinikainen) Date: Wed, 11 Jul 2001 10:46:55 +0300 Subject: [Mplayer-users] Problem compiling MPlayer-0.18pre4 on Debian Sid References: <200107101841.UAA42948@thot.banki.hu> Message-ID: <3B4C046F.9000807@reinikainen.net> > > >>>JR> gcc: installation problem, cannot exec `cc1plus': No such file or directory >>>[snip] >>>JR> Am I missing some packages? >>>Yes, a C++ compiler, install gpp binary package or compile gcc with >>>--enable-languages=c,c++ >>> >>Maybe a gpp test should be added to configure? >> >yes. >and also some tests for nasm and other requirements of libavcodec. > Yes, I also had to apt-get nasm, bison and flex before I got it working. But it works now, so I'm happy :) Thanks. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Wed Jul 11 15:56:13 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Wed, 11 Jul 2001 13:56:13 +0000 (:) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) Message-ID: Hi, Attila Kinali! On 2001-07-10 23:46:27 you wrote: >On Tue, 10 Jul 2001 23:31:17 +0200 Felix B nemann wrote: > >> arg, why argue bout that stuff, leave the choice to the user, l3codec >> is for exp a nixe implementation of mp3 decoder to compare with output >> of mp3lib to check for errors and stuff. > >IMHO the best choice. Never force the user to use something :-) > But mplayer's team do that by modifying codecs.conf so users only accepted configured codecs and too few number of people will be modify this file for self. Best regards! Nick (2001-07-11 13:52:29) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Wed Jul 11 15:52:09 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Wed, 11 Jul 2001 13:52:09 +0000 (:) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <149122978103.20010710233117@gmx.de> Message-ID: Hi, Felix B?nemann! On 2001-07-10 23:31:17 you wrote: >>>> I never said about removing win32 stuff entire for the now. >>>> But in the future - when native codecs will come in. >>>Of course. But it's as unlikely as M$ sends us WMV8 sources for example. >>> >NK> Why? Lets WMV8 support will be in mplayer as win32 stuff. >NK> But l3codeca.acm is dead thing for mplayer and soon divxc32.dll >NK> (And I hope that someone will write opensource support for divxa32) >NK> I can't find users which would be glad to use win32 codecs to >NK> lose frames and dream about upgrading their hardware. >NK> (But people are strange creatures so can be everything). > >arg, why argue bout that stuff, leave the choice to the user, l3codec >is for exp a nixe implementation of mp3 decoder to compare with output >of mp3lib to check for errors and stuff. > It seems that you strongly believe to commercial software and treat with distrust to GPL'ed code. What is nice in l3codec implementation? Maybe there is nice FPU optimized code? Or you found out that l3codec produces better sound quality on your soundcard? If last is truth then you should be reported to us about. Our mp3lib free from errors for now and has "C" optimized code which can be assigned at any time by disabling ARCH_X86 support. "C" code of mp3lib was tested during years. So commercail stuff for mp3 streams is unnecessary for us anyway. >>> >>>> In general I can remove all win32 support locally on my computer since they >>>And when you encounter an Indeo5/WMV7 AVI, you'll recompile. Well, it's up >>>to you. Or: compile two binaries, 'mplayer' and 'mplayer-win32' . Great, eh? >>>:/ >>> >NK> Yes! Great idea!!! Gabucino, where you were before? >NK> IMHO it's best solution to add --disable-win32 in configure, isn't? >NK> (Of course --enable-win32 by default) >NK> So mpg12play can be stopped too. > >yes, that's what I thought bould mpg12play from the beginning. > Does someone want to do that? >>> >>>> (Of course sometime mplayer uses divx audio support of which still is not >>>> implemented as open source codecs - but only rare .avis contain such streams) >>>No. For example a very significant amount of anime on the net (and some of >>>mine) contain DivXa. >>> >NK> For inet toys - maybe. But when I purchase a CDROM with DivX-MSMPEG4 >NK> movie I have only mp3 stream (at least in my country). So it's no problem for Russia. >In germany you can't divx movies on cdrom, for some certain copyright >restrictions =) > I thought that it is acceptable to the world entire. Sorry! >>> >>>> MPlayer could lost so much unnecessary stuffs: wine, dshow, vfw, ... and be >>>> much faster without emulators. >>>It wouldn't be faster, only the binary would be smaller. As far as I know. >>>Use UPX :) >>> >>>Will you answer to such mails : "WTF, mplayer doesn't even play Indeo !" >>>(oh well, RTFM :) >NK> Probably I have lacks of english, but I mean to remove only part of win32 >NK> codecs for now (which has opensource fastest analogs). So mplayer will support >NK> and this terrible format aka Intel's Indeo Video. >well read above I'd say leave the choice to the user, but we might >think about removing uneeded files from win32 package in the future >and only leave codec entries for them in codecs.conf. Agree. Let mplayer has golden collection of codecs. Best regards! Nick (2001-07-11 13:40:41) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Wed Jul 11 12:25:20 2001 From: atmosfear at users.sourceforge.net (=?koi8-r?B?RmVsaXggQthuZW1hbm4=?=) Date: Wed, 11 Jul 2001 12:25:20 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: References: Message-ID: <4713125142.20010711122520@gmx.de> Hello Nick, Wednesday, July 11, 2001, 3:52:09 PM, you wrote: NK> Hi, Felix B?nemann! NK> On 2001-07-10 23:31:17 you wrote: >>>>> I never said about removing win32 stuff entire for the now. >>>>> But in the future - when native codecs will come in. >>>>Of course. But it's as unlikely as M$ sends us WMV8 sources for example. >>>> >>NK> Why? Lets WMV8 support will be in mplayer as win32 stuff. >>NK> But l3codeca.acm is dead thing for mplayer and soon divxc32.dll >>NK> (And I hope that someone will write opensource support for divxa32) >>NK> I can't find users which would be glad to use win32 codecs to >>NK> lose frames and dream about upgrading their hardware. >>NK> (But people are strange creatures so can be everything). >> >>arg, why argue bout that stuff, leave the choice to the user, l3codec >>is for exp a nixe implementation of mp3 decoder to compare with output >>of mp3lib to check for errors and stuff. >> NK> It seems that you strongly believe to commercial software and treat with distrust NK> to GPL'ed code. What is nice in l3codec implementation? Maybe there is nice FPU optimized no, I believe in GPL code, why do you think this? NK> code? Or you found out that l3codec produces better sound quality on your soundcard? NK> If last is truth then you should be reported to us about. NK> Our mp3lib free from errors for now and has "C" optimized code which can be NK> assigned at any time by disabling ARCH_X86 support. "C" code of mp3lib was tested NK> during years. So commercail stuff for mp3 streams is unnecessary for us anyway. As you might no l3codec is the mpeg1 layer 3 implementation by the Fraunhofer IIS labs, which developed mpeg 1 layer 3, so that's why it's a nice sample implementation (this does not mean it's fastest, only means this should be standard implementation, which can also be used to check output of other mpg1l3 decoders, nothing more, nothing less). >>>> >>>>> In general I can remove all win32 support locally on my computer since they >>>>And when you encounter an Indeo5/WMV7 AVI, you'll recompile. Well, it's up >>>>to you. Or: compile two binaries, 'mplayer' and 'mplayer-win32' . Great, eh? >>>>:/ >>>> >>NK> Yes! Great idea!!! Gabucino, where you were before? >>NK> IMHO it's best solution to add --disable-win32 in configure, isn't? >>NK> (Of course --enable-win32 by default) >>NK> So mpg12play can be stopped too. >> >>yes, that's what I thought bould mpg12play from the beginning. >> NK> Does someone want to do that? don't understand what you want to say, I just mean I thought from the beginning that it's better to use mplayer and disable win32 stuff, then to step back to mpg12play, but think it was chosen due to easier portability or smaller codebase. >>>> >>>>> (Of course sometime mplayer uses divx audio support of which still is not >>>>> implemented as open source codecs - but only rare .avis contain such streams) >>>>No. For example a very significant amount of anime on the net (and some of >>>>mine) contain DivXa. >>>> >>NK> For inet toys - maybe. But when I purchase a CDROM with DivX-MSMPEG4 >>NK> movie I have only mp3 stream (at least in my country). So it's no problem for Russia. >>In germany you can't divx movies on cdrom, for some certain copyright >>restrictions =) >> NK> I thought that it is acceptable to the world entire. Sorry! >>>> >>>>> MPlayer could lost so much unnecessary stuffs: wine, dshow, vfw, ... and be >>>>> much faster without emulators. >>>>It wouldn't be faster, only the binary would be smaller. As far as I know. >>>>Use UPX :) >>>> >>>>Will you answer to such mails : "WTF, mplayer doesn't even play Indeo !" >>>>(oh well, RTFM :) >>NK> Probably I have lacks of english, but I mean to remove only part of win32 >>NK> codecs for now (which has opensource fastest analogs). So mplayer will support >>NK> and this terrible format aka Intel's Indeo Video. >>well read above I'd say leave the choice to the user, but we might >>think about removing uneeded files from win32 package in the future >>and only leave codec entries for them in codecs.conf. NK> Agree. Let mplayer has golden collection of codecs. NK> Best regards! Nick (2001-07-11 13:40:41) -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Wed Jul 11 12:28:26 2001 From: atmosfear at users.sourceforge.net (=?koi8-r?B?RmVsaXggQthuZW1hbm4=?=) Date: Wed, 11 Jul 2001 12:28:26 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: References: Message-ID: <2413310819.20010711122826@gmx.de> Hello Nick, Wednesday, July 11, 2001, 3:56:13 PM, you wrote: NK> Hi, Attila Kinali! NK> On 2001-07-10 23:46:27 you wrote: >>On Tue, 10 Jul 2001 23:31:17 +0200 Felix B nemann wrote: >> >>> arg, why argue bout that stuff, leave the choice to the user, l3codec >>> is for exp a nixe implementation of mp3 decoder to compare with output >>> of mp3lib to check for errors and stuff. >> >>IMHO the best choice. Never force the user to use something :-) >> NK> But mplayer's team do that by modifying codecs.conf so users only accepted NK> configured codecs and too few number of people will be modify this file for self. How many people want to fiddle arount in the windows registry and search for the GUID and stuff (and there's usually a lot of GUIDs for one codec, for all the properties pages and stuff, too, I think when I checked that stuff for some codec I got lot's of different entries and had to find the correct one), if they have windows at all. Otherwise they just need to grad a ocpy of the dll somewhere. NK> Best regards! Nick (2001-07-11 13:52:29) -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kenzelma at stud.uni-frankfurt.de Wed Jul 11 12:43:22 2001 From: kenzelma at stud.uni-frankfurt.de (Daniel Kenzelmann) Date: 11 Jul 2001 12:43:22 +0200 Subject: [Mplayer-users] Felix, you're wrong! Message-ID: <994848232.1190.0.camel@1214pc.wohnheimg.uni-frankfurt.de> >In germany you can't divx movies on cdrom, for some certain copyright >restrictions =) Why this ?? first of all, you can! You can even copy your DVD's you borrowed from someone you know well. (Or from your local DVD-Video-rental) There have to be 2 things to be obeyed 1. You may not sell this copy to anyone 2. You may not copy this copy for anyone except: a) you are a close friend of this person and b) you don't charge any money for this copy The above things are true as long: you do not use company secrets (as could be said if you use libcss) The copy-protection which was/is used today on many VHS-cassettes (or on DVD)restricts your rights as shown above. Thus, you may use a decryption tool, as long as this tool doesn't contain code which was derived from illegal actions (Disassembling of legal DVD players) And after all: if you make your own movie... why should it be forbidden to put that on CD? _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Wed Jul 11 14:49:12 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Wed, 11 Jul 2001 14:49:12 +0200 Subject: [Mplayer-users] Felix, you're wrong! In-Reply-To: <994848232.1190.0.camel@1214pc.wohnheimg.uni-frankfurt.de> References: <994848232.1190.0.camel@1214pc.wohnheimg.uni-frankfurt.de> Message-ID: <3821756774.20010711144912@gmx.de> Hello Daniel, Wednesday, July 11, 2001, 12:43:22 PM, you wrote: >>In germany you can't divx movies on cdrom, for some certain copyright >>restrictions =) DK> Why this ?? DK> first of all, you can! DK> You can even copy your DVD's you borrowed from someone you know DK> well. (Or from your local DVD-Video-rental) DK> There have to be 2 things to be obeyed DK> 1. You may not sell this copy to anyone ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Nick talked about bying DivX Movies on CD-ROM. DK> 2. You may not copy this copy for anyone except: DK> a) you are a close friend of this person and DK> b) you don't charge any money for this copy yea but it was about bying which includes money IMHO :) not about copying. DK> The above things are true as long: DK> you do not use company secrets (as could be said if you use DK> libcss) DK> The copy-protection which was/is used today on many DK> VHS-cassettes (or on DVD)restricts your rights as shown above. DK> Thus, you may use a decryption tool, as long as this tool DK> doesn't contain code which was derived from illegal actions DK> (Disassembling of legal DVD players) DK> And after all: if you make your own movie... DK> why should it be forbidden to put that on CD? Yea, that's something else, but I don't think nick talked about that. -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kenzelma at stud.uni-frankfurt.de Wed Jul 11 15:33:11 2001 From: kenzelma at stud.uni-frankfurt.de (Daniel Kenzelmann) Date: 11 Jul 2001 15:33:11 +0200 Subject: [Mplayer-users] Felix, you're wrong! In-Reply-To: <3821756774.20010711144912@gmx.de> References: <994848232.1190.0.camel@1214pc.wohnheimg.uni-frankfurt.de> <3821756774.20010711144912@gmx.de> Message-ID: <994858421.2135.0.camel@1214pc.wohnheimg.uni-frankfurt.de> On 11 Jul 2001 14:49:12 +0200, Felix B?nemann wrote: > Nick talked about bying DivX Movies on CD-ROM. If the copies are made without permission, these copies are also illegal in other countries. (e.g. China, they are illegal, but available, don't mix legality with availability) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 11 19:59:25 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 11 Jul 2001 19:59:25 +0200 (CEST) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: Message-ID: <200107111759.TAA48780@thot.banki.hu> Hi, > >> I never said about removing win32 stuff entire for the now. > >> But in the future - when native codecs will come in. > >Of course. But it's as unlikely as M$ sends us WMV8 sources for example. > > > Why? Lets WMV8 support will be in mplayer as win32 stuff. > But l3codeca.acm is dead thing for mplayer and soon divxc32.dll > (And I hope that someone will write opensource support for divxa32) > I can't find users which would be glad to use win32 codecs to > lose frames and dream about upgrading their hardware. > (But people are strange creatures so can be everything). Yes, people are strange. But users are more stranger :) > >> In general I can remove all win32 support locally on my computer since they > >And when you encounter an Indeo5/WMV7 AVI, you'll recompile. Well, it's up > >to you. Or: compile two binaries, 'mplayer' and 'mplayer-win32' . Great, eh? > >:/ > > > Yes! Great idea!!! Gabucino, where you were before? > IMHO it's best solution to add --disable-win32 in configure, isn't? > (Of course --enable-win32 by default) Agree. I've talked about this with LGB 1-2 days ago. He planned to do it. > So mpg12play can be stopped too. It's already stopped. > >> (Of course sometime mplayer uses divx audio support of which still is not > >> implemented as open source codecs - but only rare .avis contain such streams) > >No. For example a very significant amount of anime on the net (and some of > >mine) contain DivXa. > > > For inet toys - maybe. But when I purchase a CDROM with DivX-MSMPEG4 > movie I have only mp3 stream (at least in my country). So it's no problem for Russia. EHh. Where do yoy buy cdroms with divx? why don't you buy dvd if you spend money? :) > >> MPlayer could lost so much unnecessary stuffs: wine, dshow, vfw, ... and be > >> much faster without emulators. > >It wouldn't be faster, only the binary would be smaller. As far as I know. > >Use UPX :) > > > >Will you answer to such mails : "WTF, mplayer doesn't even play Indeo !" > >(oh well, RTFM :) > Probably I have lacks of english, but I mean to remove only part of win32 > codecs for now (which has opensource fastest analogs). So mplayer will support > and this terrible format aka Intel's Indeo Video. There are native linux codecs for those old formats under linux, made for xanim (but binary-only and sloow). But for new stuff like divx audio and WMV we still need win32. Btw, what about xanim codec plugin support? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Wed Jul 11 20:29:50 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Wed, 11 Jul 2001 20:29:50 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: ; from nickols_k@mail.ru on Wed, Jul 11, 2001 at 01:52:09PM +0000 References: <149122978103.20010710233117@gmx.de> Message-ID: <20010711202950.B1852@woodstock.localdomain> It's the Question that drives us, Nick Kurshev : > It seems that you strongly believe to commercial software and treat with > distrust Fork yourself an mplayer and close this thread. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From mgraffam at idsi.net Wed Jul 11 20:33:48 2001 From: mgraffam at idsi.net (mgraffam at idsi.net) Date: Wed, 11 Jul 2001 14:33:48 -0400 (EDT) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <200107111759.TAA48780@thot.banki.hu> Message-ID: On Wed, 11 Jul 2001, Arpi wrote: > > Yes! Great idea!!! Gabucino, where you were before? > > IMHO it's best solution to add --disable-win32 in configure, isn't? > > (Of course --enable-win32 by default) > Agree. I've talked about this with LGB 1-2 days ago. He planned to do it. > > > So mpg12play can be stopped too. > It's already stopped. Well, when disabling Win32 support is available in CVS, I'll dig out a video card for my Alpha and start working to port Mplayer to Alpha/Linux. I have a feeling its not going to work, I suspect that much of the code cobbled together into Mplayer is not 64-bit clean :) But I'll try to take care of that. > > For inet toys - maybe. But when I purchase a CDROM with DivX-MSMPEG4 > > movie I have only mp3 stream (at least in my country). So it's no problem for Russia. > EHh. Where do yoy buy cdroms with divx? why don't you buy dvd if you spend > money? :) Well, I dunno about Russia, but I'm in New York City, and I get DivX CD's all the time in Chinatown. Black market stuff, of course. But I get good quality movies, some which aren't out yet on DVD or still in theaters, for $5-10 a piece. About the price of a movie ticket here, and far cheaper than many DVDs :) > But for new stuff like divx audio and WMV we still need win32. Indeed. We'll need win32 for new codecs for quite some time, possibly forever if Linux doesn't make more inroads into the desktop market. So I certainly don't like the idea of removing such support completely. > Btw, what about xanim codec plugin support? Thats an excellent idea. I was thinking about that the other day, actually. Netscape and xanim plugin support would be excellent. Mark Podlipec is working on a "next generation" version of xanim (tentatively called xanym or xanym2) which looks interesting. Though, if I had to vote, I'd say Netscape plugin support would be better to work on. The main reason being that if, say, Sorenson and Apple are ever going to put out a Quicktime codec for Linux, I figure they'd do it as a plugin for Netscape (it avoids having to do GUI support under Linux, and avoids the bad politics of the KDE/Gnome troubles, plus it is easier for them to do). If we support Netscape plugins, we get Flash support right now, and other stuff that I'm probably not even aware of. Another idea is some sort of X11/OSS wrapper support. Hijack X11 draws and pump the images into Mplayer. Mplayer can then consume xanim, realplayer, or whatever else for output through libvo (automatic Xv support for legacy apps, matrox output, etc etc). Of course, we could also just write the frames out to images and dump the audio to WAV and then reencode Real, Cinepak, etc content to DivX. :) Also note that Netscape plugin support achieves this last goal in theory too, because we can use the Plugger plugin (which, IIRC consumes X apps for use within Netscape). -- Michael Graffam (mgraffam at idsi.net) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 11 20:41:19 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 11 Jul 2001 20:41:19 +0200 (CEST) Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <20010711202950.B1852@woodstock.localdomain> Message-ID: <200107111841.UAA25514@thot.banki.hu> Hi, > It's the Question that drives us, Nick Kurshev : > > It seems that you strongly believe to commercial software and treat with > > distrust > Fork yourself an mplayer and close this thread. Ehh... we'll make win32 optional. so problem is solved, now we can close the thread. no fork needed. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lgb at lgb.hu Wed Jul 11 20:47:59 2001 From: lgb at lgb.hu (=?iso-8859-2?B?R+Fib3IgTOlu4XJ0?=) Date: Wed, 11 Jul 2001 20:47:59 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <200107111841.UAA25514@thot.banki.hu> Message-ID: <20010711204759.A2191@vega.digitel2002.hu> On Wed, Jul 11, 2001 at 08:41:19PM +0200, Arpi wrote: > Hi, > > > It's the Question that drives us, Nick Kurshev : > > > It seems that you strongly believe to commercial software and treat with > > > distrust > > Fork yourself an mplayer and close this thread. > Ehh... > > we'll make win32 optional. so problem is solved, now we can > close the thread. no fork needed. right. And we will be able to port mplayer to non-x86 platforms easily with this ability ... -- --[ G?bor L?n?rt ]---[ Vivendi Telecom Hungary ]---------[ lgb at lgb.hu ]-- U have 8 bit comp or chip of them and it's unused or to be sold? Call me! -------[ +36 30 2270823 ]------> LGB <-----[ Linux/UNIX/8bit 4ever ]----- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Wed Jul 11 20:58:39 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Wed, 11 Jul 2001 20:58:39 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <20010711202950.B1852@woodstock.localdomain>; from gabucino on Wed, Jul 11, 2001 at 08:29:50PM +0200 References: <149122978103.20010710233117@gmx.de> <20010711202950.B1852@woodstock.localdomain> Message-ID: <20010711205839.A2015@woodstock.localdomain> It's the Question that drives us, Gabucino : > > It seems that you strongly believe to commercial software and treat with > > distrust > Fork yourself an mplayer and close this thread. Sorry for being harsh, I reply quicker than I think. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From jaf.corporation at gmx.at Wed Jul 11 21:09:01 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Wed, 11 Jul 2001 21:09:01 +0200 Subject: [Mplayer-users] Elementary streams (ES) Message-ID: <001901c10a3c$f2470260$6400a8c0@p3> Hi ... what about support of MPEG-2 elementary streams? it is the format, in which a dvb-s card can record to harddisc. i could send you such a file for testing if you want. Here a text about Elementary streams (ES): Several manufacturers of TI TMS320AV711x based cards (TechnoTrend, Siemens, Hauppauge, and more) have chosen, not to store the data not as transport stream but in a more compact format which they call "PVA", which is near to the chips input buffer format. It is not an MPEG standard format, but it is based on the same elementary streams (ES). Therefore it can be converted into MPEG2 formats. mfg Johannes -------------- next part -------------- An HTML attachment was scrubbed... URL: From maxk at qualcomm.com Wed Jul 11 21:12:39 2001 From: maxk at qualcomm.com (Maksim Krasnyanskiy) Date: Wed, 11 Jul 2001 12:12:39 -0700 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: <20010711204759.A2191@vega.digitel2002.hu> References: <20010711204759.A2191@vega.digitel2002.hu> Message-ID: <0107111212390A.00789@btdemo1.qualcomm.com> > > Ehh... > > > > we'll make win32 optional. so problem is solved, now we can > > close the thread. no fork needed. > > right. And we will be able to port mplayer to non-x86 platforms easily with this ability ... Exactly. The first thing I did (when compiled for iPAQ) was getting rid of win32 stuff. So, I'll try to find some time and prepare/send the patches I promised. Max -- Maksim Krasnyanskiy Senior Kernel Engineer Qualcomm Incorporated maxk at qualcomm.com http://bluez.sf.net http://vtun.sf.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From sjh at hyperperth.otago.ac.nz Thu Jul 12 23:30:53 2001 From: sjh at hyperperth.otago.ac.nz (sjh) Date: Fri, 13 Jul 2001 09:30:53 +1200 Subject: [Mplayer-users] Help!! /usr/bin/ld: cannot find -lstdc++ Message-ID: <3B4E170D.BC71ADEA@hyperperth.otago.ac.nz> Hi there all. Can anyone help me with this pesky prob? I have RedHat7.1 with kernel 2.4.2-2 XFree86 Version 4.0.3 I have upgraded my system as per ther recommendations to have: ld 2.10.9 gcc --version 2.95.31 GNU C library libc-2.2.3 MPlayer-20010711 (snapshot yesterday) modified config.mak to EXTRA_INC=-I/usr/local/include -I/usr/include/g++-3/ libstdc++-2.96-81 libstdc++2-2.10.0-1 libstdc++-devel-2.96-81 compat-libstdc++-6.2-2.9.0.14 And still I have make bomb out with the error message /usr/bin/ld: cannot find -lstdc++ Has anyone any suggestions as to what I might do? (apart from wrong coloured socks on today!!) Many thanks Stephen +----------------Stephen Harris------------------+ |----------Instrument and Field Technician-------| |------------Geography Department----------------| |--------------University of Otago---------------| |-------Dunedin, South Island, New Zealand-------| |---------------sjh at hyperperth.otago.ac.nz-------| |-----------------Ph 03 4799077------------------| +-------------------Fax 03 4799037---------------+ _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Thu Jul 12 00:13:43 2001 From: kinali at gmx.net (Attila Kinali) Date: Thu, 12 Jul 2001 00:13:43 +0200 Subject: [Mplayer-users] Help!! /usr/bin/ld: cannot find -lstdc++ In-Reply-To: <3B4E170D.BC71ADEA@hyperperth.otago.ac.nz> References: <3B4E170D.BC71ADEA@hyperperth.otago.ac.nz> Message-ID: On Fri, 13 Jul 2001 09:30:53 +1200 sjh wrote: > Has anyone any suggestions as to what I might do? (apart from wrong You are missing the libstdc++ as it says above :-) it's like the libc for c++ there should be a package for this. Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Thu Jul 12 00:17:34 2001 From: kinali at gmx.net (Attila Kinali) Date: Thu, 12 Jul 2001 00:17:34 +0200 Subject: [Mplayer-users] 0.18pre4 released with native divx codec :) In-Reply-To: References: Message-ID: Hi Nick, On Wed, 11 Jul 2001 13:56:13 +0000 (:) "Nick Kurshev" wrote: > >IMHO the best choice. Never force the user to use something :-) > > > But mplayer's team do that by modifying codecs.conf so users only accepted > configured codecs and too few number of people will be modify this file for self. Doesn't really matter. They still have the choice, even if they don't use it. It's like Linux distros, most of them offer full configuration, but just a few use it. But noone want's to miss this option, even those who never use it. Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From sundodger666 at yahoo.com Thu Jul 12 08:45:19 2001 From: sundodger666 at yahoo.com (Stan Jefferson) Date: Wed, 11 Jul 2001 23:45:19 -0700 (PDT) Subject: [Mplayer-users] Help!! /usr/bin/ld: cannot find -lstdc++ In-Reply-To: <3B4E170D.BC71ADEA@hyperperth.otago.ac.nz> Message-ID: <20010712064519.17778.qmail@web11702.mail.yahoo.com> After you install new libraries, you need to run "ldconfig" so that "ld" knows where the libraries are located. After you run "ldconfig", run "ldconfig -p" to verify that the new libraries have been added to the cache. If they haven't, you will have to add the directory they are located in to the "/etc/ld.so.conf" file and rerun "ldconfig". --- sjh wrote: > Hi there all. > Can anyone help me with this pesky prob? > I have RedHat7.1 with kernel 2.4.2-2 > XFree86 Version 4.0.3 > I have upgraded my system as per ther > recommendations to have: > ld 2.10.9 > gcc --version 2.95.31 > GNU C library libc-2.2.3 > MPlayer-20010711 (snapshot yesterday) > modified config.mak to > EXTRA_INC=-I/usr/local/include > -I/usr/include/g++-3/ > libstdc++-2.96-81 > libstdc++2-2.10.0-1 > libstdc++-devel-2.96-81 > compat-libstdc++-6.2-2.9.0.14 > And still I have make bomb out with the error > message > /usr/bin/ld: cannot find -lstdc++ > Has anyone any suggestions as to what I might do? > (apart from wrong > coloured socks on today!!) > Many thanks > Stephen > +----------------Stephen Harris------------------+ > |----------Instrument and Field Technician-------| > |------------Geography Department----------------| > |--------------University of Otago---------------| > |-------Dunedin, South Island, New Zealand-------| > |---------------sjh at hyperperth.otago.ac.nz-------| > |-----------------Ph 03 4799077------------------| > +-------------------Fax 03 4799037---------------+ > > > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Thu Jul 12 16:02:34 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Thu, 12 Jul 2001 14:02:34 +0000 (:) Subject: [Mplayer-users] Mplayer output Message-ID: Hello, Arpi! After adding libavcodec to mplayer, it contains additional outputs. When I executed mplayer -vo help I've got: Available video output drivers: xmga X11 (Matrox G200/G400 overlay in window using /dev/mga_vid) mga Matrox G200/G400 overlay (/dev/mga_vid) xv X11/Xv x11 X11 ( XImage/Shm ) gl X11 (OpenGL) dga DGA ( Direct Graphic Access V2.0 ) sdl SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!) fbdev Framebuffer Device svga SVGAlib png PNG file null Null video output odivx OpenDivX AVI File writer pgm PGM file md5 MD5 sum Well but there is only one writer: odivx, but imho new stuff contain much more writers: divx-msmpeg4, mpeg1, mpeg2, ac3, and I'm not sure but about mp3. Do you plan to expand mplayer's features with these outputs? Or they are unstable? Best regarsd! Nick _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From creppy at freemail.hu Thu Jul 12 14:07:24 2001 From: creppy at freemail.hu (Creepy) Date: Thu, 12 Jul 2001 14:07:24 +0200 Subject: [Mplayer-users] Debian Problems Nr. 2 (To Dariusz Pietrzak) References: Message-ID: <001301c10acb$360216f0$84d03c86@informatik.uniulm.de> So I have tried your tip, I get no error MSG after install but the thing is the same: Doesn't matter with which parameter I start mplayer with (alone, -vo help, -vo djskghjkasdhkg, anything), I got no help, no movie playback, no nothing, just the version number, and that -alsa is no more needen. That's all. I hope you can help me. Mplayer still RULEZ! Hungary rulez :) I love my country :) So later Creepy _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Thu Jul 12 14:45:35 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Thu, 12 Jul 2001 14:45:35 +0200 (CEST) Subject: [Mplayer-users] Debian Problems Nr. 2 (To Dariusz Pietrzak) In-Reply-To: <001301c10acb$360216f0$84d03c86@informatik.uniulm.de> Message-ID: > So I have tried your tip, I get no error MSG after install but the thing is sorry, this was not very good tip. people are jumping on my head all the time, I couldn't get to this problem the right way yet. Anyhow - could you please show me what your /etc/mplayer.conf look like? and also version of debian and debconf would help me in isolating the problem. -- Dariusz Pietrzak Excuse me, I'm cixelsyd today _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Thu Jul 12 17:11:04 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Thu, 12 Jul 2001 17:11:04 +0200 Subject: [Mplayer-users] Debian Problems Nr. 2 (To Dariusz Pietrzak) In-Reply-To: ; from dariush@ajax.umcs.lublin.pl on Thu, Jul 12, 2001 at 02:45:35PM +0200 References: <001301c10acb$360216f0$84d03c86@informatik.uniulm.de> Message-ID: <20010712171104.A1918@woodstock.localdomain> It's the Question that drives us, Dariusz Pietrzak : > Anyhow - could you please show me what your /etc/mplayer.conf look like? Well, imho it's very bad idea to create /etc/mplayer.conf .. I've already encountered someone on IRC with the same problem. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From dariush at ajax.umcs.lublin.pl Thu Jul 12 17:41:26 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Thu, 12 Jul 2001 17:41:26 +0200 (CEST) Subject: [Mplayer-users] Debian Problems Nr. 2 (To Dariusz Pietrzak) In-Reply-To: <20010712171104.A1918@woodstock.localdomain> Message-ID: > It's the Question that drives us, Dariusz Pietrzak : > > Anyhow - could you please show me what your /etc/mplayer.conf look like? > Well, imho it's very bad idea to create /etc/mplayer.conf .. I've already > encountered someone on IRC with the same problem. why not? it have to be created one way or another. -- Dariusz Pietrzak Excuse me, I'm cixelsyd today _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Thu Jul 12 18:13:05 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Thu, 12 Jul 2001 18:13:05 +0200 Subject: [Mplayer-users] Debian Problems Nr. 2 (To Dariusz Pietrzak) In-Reply-To: ; from dariush@ajax.umcs.lublin.pl on Thu, Jul 12, 2001 at 05:41:26PM +0200 References: <20010712171104.A1918@woodstock.localdomain> Message-ID: <20010712181305.A3638@woodstock.localdomain> It's the Question that drives us, Dariusz Pietrzak : > > encountered someone on IRC with the same problem. > why not? > it have to be created one way or another. Has it? Why? Users tend to forget about this file, and I can't see a reason why $HOME/.mplayer/config isn't sufficient. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From linuxtyrant at yahoo.com Thu Jul 12 19:10:46 2001 From: linuxtyrant at yahoo.com (Alex Combas) Date: Thu, 12 Jul 2001 10:10:46 -0700 (PDT) Subject: [Mplayer-users] Re: its OK. In-Reply-To: Message-ID: <20010712171046.78452.qmail@web13703.mail.yahoo.com> yes plesae put me on the list, cant get much more explicit than that. --- mplayer-users-request at lists.sourceforge.net wrote: > Mplayer-users -- confirmation of subscription -- > request 783034 __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From linuxtyrant at yahoo.com Thu Jul 12 19:10:18 2001 From: linuxtyrant at yahoo.com (Alex Combas) Date: Thu, 12 Jul 2001 10:10:18 -0700 (PDT) Subject: [Mplayer-users] Re: its OK. In-Reply-To: Message-ID: <20010712171018.91102.qmail@web13704.mail.yahoo.com> yes plesae put me on the list, cant get much more explicit than that. --- mplayer-users-request at lists.sourceforge.net wrote: > Mplayer-users -- confirmation of subscription -- > request 783034 __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 12 20:14:37 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 12 Jul 2001 20:14:37 +0200 (CEST) Subject: [Mplayer-users] Elementary streams (ES) In-Reply-To: <001901c10a3c$f2470260$6400a8c0@p3> Message-ID: <200107121814.UAA15020@thot.banki.hu> Hi, > what about support of MPEG-2 elementary streams? they are supported > it is the format, in which a dvb-s card can record to harddisc. no, it uses Transport Streams, AFAIK. ES is video-only or audio-only, without timestamps and fixed-size blocks/packs encapsulating. > i could send you such a file for testing if you want. upload it to ftp://mplayer.dev.hu/MPlayer/incoming > Here a text about Elementary streams (ES): > > Several manufacturers of TI TMS320AV711x based cards (TechnoTrend, Siemens, Hauppauge, and more) have chosen, not to store the data not as > transport stream but in a more compact format which they call "PVA", which is near to the chips input buffer format. It is not an MPEG > standard format, but it is based on the same elementary streams (ES). Therefore it can be converted into MPEG2 formats. hmm. it is not ES< just _based_ on it. upload docs on this format and some sample file, i'll check. supporting standard TS is on my TODO, but now i'm on holiday, can't code it yet. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Thu Jul 12 20:14:01 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Thu, 12 Jul 2001 20:14:01 +0200 Subject: [Mplayer-users] Debian Problems Nr. 2 (To Dariusz Pietrzak) In-Reply-To: <001301c10acb$360216f0$84d03c86@informatik.uniulm.de> References: <001301c10acb$360216f0$84d03c86@informatik.uniulm.de> Message-ID: <01071220140101.04350@astral> On Thursday, 12. July 2001 14:07, you wrote: > So I have tried your tip, I get no error MSG after install but the thing is > the same: Doesn't matter with which parameter I start mplayer with > (alone, -vo help, -vo djskghjkasdhkg, anything), I got no help, no movie > playback, no nothing, just the version number, and that -alsa is no more > needen. That's all. I hope you can help me. Mplayer still RULEZ! Hungary > rulez :) I love my country :) > So later I'm no debian guy but maybe mplayer takes values from a config file. > > Creepy > -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 12 20:26:00 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 12 Jul 2001 20:26:00 +0200 (CEST) Subject: [Mplayer-users] Mplayer output In-Reply-To: Message-ID: <200107121826.UAA35368@thot.banki.hu> Hi, > After adding libavcodec to mplayer, it contains additional outputs. > When I executed mplayer -vo help I've got: > Available video output drivers: > odivx OpenDivX AVI File writer it is a half-hour hack, just for testing opendivx codec. it doesn't support audio, and quite useless. > Well but there is only one writer: odivx, but imho new stuff contain much more > writers: divx-msmpeg4, mpeg1, mpeg2, ac3, and I'm not sure but about mp3. > > Do you plan to expand mplayer's features with these outputs? Or they are unstable? yes, of course, but later. mplayer will have grabbing/conversion features, after i've implemented some libmuxer stuff. ffmpeg's file writters are buggy, but they are a good codebase for start. but i repeat: it will be done LATER. now we have some more important things to do. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From falk at lunat23.de Thu Jul 12 20:41:53 2001 From: falk at lunat23.de (Falk Schubert) Date: Thu, 12 Jul 2001 20:41:53 +0200 Subject: [Mplayer-users] ac3 and sse Message-ID: <20010712204153.5c806a5b.falk@lunat23.de> Hi, How can I watch divx movies encoded with ac3 audio? When I tried it with the latest mplayer version I get the following output: > Detected AVI file format! > ==> Found video stream: 0 > ==> Found audio stream: 1 > VIDEO: [DIV3] 640x368 24bpp 25.00 fps 1563.8 kbps (190.9 kbyte/s) > [V] filefmt:3 fourcc:0x33564944 size:640x368 fps:25.00 ftime:=0.0400 > Detected audio codec: [ac3] drv:3 (AC3) > dec_audio: Allocating 6144 + 65536 = 71680 bytes for output buffer > !! libac3 (core v0.6.2) : using SSE optimization > 5.1 Mode 48.0 KHz 448 kbps Complete Main Audio Service > Illegal instruction (core dumped) I have a MOBILE CELERON and I use FreeBSD. Furthermore I didn't encounter specific probs during compiling... thanx for any help... -- enjoy your day! Falk Schubert Joellenbeckerstr. 287 33613 Bielefeld _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From asalamon at elender.hu Thu Jul 12 20:38:05 2001 From: asalamon at elender.hu (Andras Salamon) Date: Thu, 12 Jul 2001 20:38:05 +0200 (CEST) Subject: [Mplayer-users] Debian Problems Nr. 2 (To Dariusz Pietrzak) In-Reply-To: <20010712181305.A3638@woodstock.localdomain> Message-ID: On Thu, 12 Jul 2001, Gabucino wrote: > It's the Question that drives us, Dariusz Pietrzak : > > > encountered someone on IRC with the same problem. > > why not? > > it have to be created one way or another. > Has it? Why? > Users tend to forget about this file, and I can't see a reason why > $HOME/.mplayer/config isn't sufficient. > Because you have to create it for all the users. If you use /etc, it's only one file. I patched mplayer for myself, so I have /etc/mplayer_codecs.conf also. :) Sala > _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 12 21:03:43 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 12 Jul 2001 21:03:43 +0200 (CEST) Subject: [Mplayer-users] ac3 and sse In-Reply-To: <20010712204153.5c806a5b.falk@lunat23.de> Message-ID: <200107121903.VAA14406@thot.banki.hu> Hi, > > !! libac3 (core v0.6.2) : using SSE optimization > > I have a MOBILE CELERON and I use FreeBSD. Furthermore I didn't encounter strange. and you are not the first with this problem. i don't know why is SSE detected on non-sse cpus. maybe Nick did something wrong at libac3 optimization? can you check this? what about config.h? doe sit have HAVE_SSE defined? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From mummenschanz at gmx.net Thu Jul 12 21:07:19 2001 From: mummenschanz at gmx.net (Dieter Mummenschanz) Date: Thu, 12 Jul 2001 21:07:19 +0200 (MEST) Subject: [Mplayer-users] sound pitching problem with DivX streams! Message-ID: <13942.994964839@www20.gmx.net> Hi! I?ve encountered a sound pitching problem when playing divx movies. The sound is pitched too slow, but the movie plays totally smooth. The problem appears with all mplayer versions!!!! My System: SuSE 7.2 Kernel 2.4.6 SMP X-Version 4.10 NVIDIA Driver 1.0.1241 KDE 2.2B1 Hardware: DUAL PII 450 512 MByte RAM GeForce 256 SB AWE 64 Gold ISA If you need more information, please let me know! Thanx in advance for help Dieter -- GMX - Die Kommunikationsplattform im Internet. http://www.gmx.net GMX Tipp: Machen Sie Ihr Hobby zu Geld bei unserem Partner 1&1! http://profiseller.de/info/index.php3?ac=OM.PS.PS003K00596T0409a _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Thu Jul 12 21:55:15 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Thu, 12 Jul 2001 21:55:15 +0200 Subject: [Mplayer-users] Elementary streams (ES) References: <200107121814.UAA15020@thot.banki.hu> Message-ID: <005701c10b0c$91d87640$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* Hi, > > i could send you such a file for testing if you want. > upload it to ftp://mplayer.dev.hu/MPlayer/incoming > i've found something, the correct name seams to be "multiplexed PES" ... but i will upload a sample an some programm(source), I hope the help you ... i will upload today or tomorrow (I'm very busy at the moment ;-( ... also no time in the work, i must install Mplayer on the Server of my teammate ;-) > supporting standard TS is on my TODO, but now i'm on holiday, can't code it well, very good ... you have earned that ;-) (i hope that is correct [the grammar and text) mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lists at reserv.at Thu Jul 12 22:59:04 2001 From: lists at reserv.at (Martin Aumueller) Date: Thu, 12 Jul 2001 22:59:04 +0200 Subject: [Mplayer-users] Processor detection in configure on SMP systems Message-ID: <20010712225904.A30890@tortoise.alexandrinum.de> Hi! Processor detection on Linux SMP systems does not work: all the entries in /proc/cpuinfo are duplicated for each cpu. So all the values end up two times in the variables like $pvendor, ... in the configure script. And because of this it doesn't work. But as Linus says that all CPUs have to be the same it should be enough to discard the entries for all cpus but the first. As an example of such a /proc/cpuinfo I have mine attached. I'd be glad if this could be fixed, but in any case thanks for the cool player. Martin -------------- next part -------------- processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 5 model name : Pentium II (Deschutes) stepping : 2 cpu MHz : 348.210 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr bogomips : 694.68 processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 5 model name : Pentium II (Deschutes) stepping : 2 cpu MHz : 348.210 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr bogomips : 696.32 From atmosfear at users.sourceforge.net Thu Jul 12 23:20:35 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Thu, 12 Jul 2001 23:20:35 +0200 Subject: [Mplayer-users] Elementary streams (ES) In-Reply-To: <200107121814.UAA15020@thot.banki.hu> References: <200107121814.UAA15020@thot.banki.hu> Message-ID: <01071223203502.04350@astral> On Thursday, 12. July 2001 20:14, you wrote: > Hi, > [snip] > supporting standard TS is on my TODO, but now i'm on holiday, can't code it > yet. Have Fun and ... who knows =) > > A'rpi / Astral & ESP-team > > -- > mailto:arpi at thot.banki.hu > http://esp-team.scene.hu > -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Thu Jul 12 23:27:27 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Thu, 12 Jul 2001 23:27:27 +0200 Subject: [Mplayer-users] ac3 and sse In-Reply-To: <200107121903.VAA14406@thot.banki.hu> References: <200107121903.VAA14406@thot.banki.hu> Message-ID: <01071223272703.04350@astral> On Thursday, 12. July 2001 21:03, you wrote: > Hi, > > > > !! libac3 (core v0.6.2) : using SSE optimization > > > > I have a MOBILE CELERON and I use FreeBSD. Furthermore I didn't encounter > > strange. and you are not the first with this problem. > i don't know why is SSE detected on non-sse cpus. maybe Nick > did something wrong at libac3 optimization? I've recently applied SSE stuff from linuxvideo.org which Nick modified to work with our libac3 codebase and it worked fine here. > > can you check this? what about config.h? doe sit have > HAVE_SSE defined? Yes, I'm also interested in it, maybe there's some wrong preprocessor stuff in the new code. > > A'rpi / Astral & ESP-team > > -- > mailto:arpi at thot.banki.hu > http://esp-team.scene.hu > -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Thu Jul 12 23:34:04 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Thu, 12 Jul 2001 23:34:04 +0200 Subject: [Mplayer-users] sound pitching problem with DivX streams! In-Reply-To: <13942.994964839@www20.gmx.net> References: <13942.994964839@www20.gmx.net> Message-ID: <01071223340404.04350@astral> On Thursday, 12. July 2001 21:07, you wrote: > Hi! > > I?ve encountered a sound pitching problem when playing divx movies. > The sound is pitched too slow, but the movie plays totally smooth. > The problem appears with all mplayer versions!!!! This usually happens with soundcards/drivers that don't support 48kHz. Please check mplayer output if the divx has 48kHz sound and try with another that has 44kHz and check if it's ok then. > > My System: > > SuSE 7.2 > Kernel 2.4.6 SMP > X-Version 4.10 > NVIDIA Driver 1.0.1241 > KDE 2.2B1 > > Hardware: > > DUAL PII 450 > 512 MByte RAM > GeForce 256 > SB AWE 64 Gold ISA > > If you need more information, please let me know! what soundcard driver do you use? ie. oss driver from creative, kernel's oss driver, alsa 0.5 oss emulation with -ao oss or native alsa with -ao alsa5, alsa 0.9 oss emulation... And please also check if the driver you use supports 48kHz samplerate. > > Thanx in advance for help > > Dieter -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From frank at merrill-samuelson.com Fri Jul 13 07:33:38 2001 From: frank at merrill-samuelson.com (Frank W. Samuelson) Date: Thu, 12 Jul 2001 23:33:38 -0600 Subject: [Mplayer-users] Processor detection in configure on SMP systems Message-ID: <3B4E8832.7030802@merrill-samuelson.com> > Processor detection on Linux SMP systems does not work: all the entries > in /proc/cpuinfo are duplicated for each cpu. So all the values end up > two times in the variables like $pvendor, ... in the configure script. I noticed this too. It is quickly fixed with a `head -1` at the end of all the processor definitions: pname=`$_cpuinfo | grep 'model name' | cut -d ':' -f 2|head -1` pparam=`$_cpuinfo | grep 'features' | cut -d ':' -f 2|head -1` if [ -z "$pparam" ]; then pparam=`$_cpuinfo | grep 'flags' | cut -d ':' -f 2|head -1` fi pvendor=`$_cpuinfo | grep 'vendor_id' | cut -d ':' -f 2 | cut -d ' ' -f 2|head -1` pfamily=`$_cpuinfo | grep 'cpu family' | cut -d ':' -f 2 | cut -d ' ' -f 2|head -1` pmodel=`$_cpuinfo | grep -v 'model name' | grep 'model' | cut -d ':' -f 2 | cut -d ' ' -f 2|head -1` pstepping=`$_cpuinfo | grep 'stepping' | cut -d ':' -f 2 | cut -d ' ' -f 2|head -1` _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From frank at merrill-samuelson.com Fri Jul 13 07:56:19 2001 From: frank at merrill-samuelson.com (Frank W. Samuelson) Date: Thu, 12 Jul 2001 23:56:19 -0600 Subject: [Mplayer-users] adjusting brightness Message-ID: <3B4E8D83.2010505@merrill-samuelson.com> Let me preface by saying that mplayer RULES! It's the best movie player I've tried for Linux, or Windoze for that matter. Small problem: My monitor does not get exceptionally bright and I've noticed that some videos tend to be rather dark. (Made by the same people that play quake, I guess.) Is there an easy way to bump up the brightness? Or is this codec and/or video device dependent? Thanks for any good tips, or bad hacks. -Frank _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Fri Jul 13 12:50:40 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Fri, 13 Jul 2001 10:50:40 +0000 (:) Subject: [Mplayer-users] ac3 and sse In-Reply-To: <200107121903.VAA14406@thot.banki.hu> Message-ID: Hi, Arpi! On 2001-07-12 21:03:43 you wrote: >Hi, > >> > !! libac3 (core v0.6.2) : using SSE optimization >> >> I have a MOBILE CELERON and I use FreeBSD. Furthermore I didn't encounter > >strange. and you are not the first with this problem. >i don't know why is SSE detected on non-sse cpus. maybe Nick >did something wrong at libac3 optimization? > Indeed I only suggest a new stuff for testing and Felix have applied that. Therefore he don't have any problems with it and stuff works. libac3 doesn't contain any run-time cpu determination therefore it's problem of 'configure' but not source code of library. libac3 against libmp3 is fully configured by C-preprocessor. >can you check this? what about config.h? doe sit have >HAVE_SSE defined? Best regards! Nick (2001-07-13 10:47:24) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From creppy at freemail.hu Fri Jul 13 10:14:36 2001 From: creppy at freemail.hu (Creepy) Date: Fri, 13 Jul 2001 10:14:36 +0200 Subject: [Mplayer-users] Debian Prob. References: Message-ID: <000f01c10b73$dba7b3f0$82d03c86@informatik.uniulm.de> So the config is like: fs=yes alsa = nem :)))) vo=xv it worked this way for me with IdegCounter. I have it in $HOME/.mplayer/ I'm not jumping on you anyway :) but I like mplayer and I wanna use the never version. So later, Creepy _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 13 10:34:03 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Fri, 13 Jul 2001 10:34:03 +0200 Subject: [Mplayer-users] Debian Prob. In-Reply-To: <000f01c10b73$dba7b3f0$82d03c86@informatik.uniulm.de> References: <000f01c10b73$dba7b3f0$82d03c86@informatik.uniulm.de> Message-ID: <1775232423.20010713103403@gmx.de> Hello Creepy, Friday, July 13, 2001, 10:14:36 AM, you wrote: C> So the config is like: C> fs=yes C> alsa = nem :)))) C> vo=xv as alsa option has been remnoved, remove that line from the config and try again :-P (otherwise you'll always get error message, that that option is no longer used) C> it worked this way for me with IdegCounter. I have it in $HOME/.mplayer/ C> I'm not jumping on you anyway :) but I like mplayer and I wanna use the C> never version. C> So later, C> Creepy -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Fri Jul 13 10:57:14 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Fri, 13 Jul 2001 10:57:14 +0200 (CEST) Subject: [Mplayer-users] Debian Prob. In-Reply-To: <1775232423.20010713103403@gmx.de> Message-ID: > as alsa option has been remnoved, remove that line from the config and > try again :-P (otherwise you'll always get error message, that that > option is no longer used) ha, that's why instalation should take care of this, and package should now such things, not the user. anyhow - my bad.I should've taken care of that. -- Dariusz Pietrzak Excuse me, I'm cixelsyd today _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From list at sylence.de Fri Jul 13 09:18:43 2001 From: list at sylence.de (Janto Trappe) Date: Fri, 13 Jul 2001 09:18:43 +0200 Subject: [Mplayer-users] Re: Debian Problems Nr. 2 (To Dariusz Pietrzak) In-Reply-To: ; from dariush@ajax.umcs.lublin.pl on Thu, Jul 12, 2001 at 02:45:35PM +0200 References: <001301c10acb$360216f0$84d03c86@informatik.uniulm.de> Message-ID: <20010713091843.A1021@sylence.de> [delete debian/postinst] On [12-07-01 14:45], Dariusz Pietrzak wrote: > > So I have tried your tip, I get no error MSG after install but the thing is > sorry, this was not very good tip. people are jumping on my head all the Why not? It works for me. Janto -- It's better to keep your mouth shut and appear stupid than to open it and remove all doubt. - Mark Twain (1835 - 1910) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 13 11:45:29 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Fri, 13 Jul 2001 11:45:29 +0200 Subject: [Mplayer-users] adjusting brightness In-Reply-To: <3B4E8D83.2010505@merrill-samuelson.com> References: <3B4E8D83.2010505@merrill-samuelson.com> Message-ID: <01071311452907.04350@astral> On Friday, 13. July 2001 07:56, you wrote: > Let me preface by saying that mplayer RULES! > It's the best movie player I've tried > for Linux, or Windoze for that matter. > > Small problem: > My monitor does not get exceptionally bright and > I've noticed that some videos tend to be rather dark. > (Made by the same people that play quake, I guess.) Is there > an easy way to bump up the brightness? Or is this > codec and/or video device dependent? > Thanks for any good tips, or bad hacks. hmm I can give two hints (both untested), first the dshow divx codec allows changing brightness of the image, so commented out code for that is in mplayer.c (search for divx_quality, you'll get the ide what the correct stuff is). Second tip imho XVideo extension allows for brightness etc. control, so that could be done somewhere in libvo/vo_xv.c. Think Arpi also suggested, that brightness could be changed on YUV to RGB conversion used by -vo x11, dga and others by changing the constants used. > > -Frank > -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From epperson at mail.desy.de Fri Jul 13 11:49:44 2001 From: epperson at mail.desy.de (Douglas Epperson) Date: Fri, 13 Jul 2001 11:49:44 +0200 (MEST) Subject: [Mplayer-users] nasm, sad_mmx, and psadbw Message-ID: I'm compiling on a linux i586 platform. I run make and get the following error. +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ make -C libavcodec make[1]: Entering directory `/products/mplayer/MPlayer-0.18pre5/libavcodec' nasm -f elf -o i386/sad_mmx.o i386/sad_mmx.s i386/sad_mmx.s:215: parser: instruction expected i386/sad_mmx.s:216: parser: instruction expected i386/sad_mmx.s:216: symbol `psadbw' redefined i386/sad_mmx.s:227: parser: instruction expected i386/sad_mmx.s:227: symbol `psadbw' redefined i386/sad_mmx.s:228: parser: instruction expected i386/sad_mmx.s:228: symbol `psadbw' redefined i386/sad_mmx.s:239: parser: instruction expected i386/sad_mmx.s:239: symbol `psadbw' redefined i386/sad_mmx.s:240: parser: instruction expected i386/sad_mmx.s:240: symbol `psadbw' redefined i386/sad_mmx.s:251: parser: instruction expected i386/sad_mmx.s:251: symbol `psadbw' redefined i386/sad_mmx.s:252: parser: instruction expected i386/sad_mmx.s:252: symbol `psadbw' redefined make[1]: *** [i386/sad_mmx.o] Error 1 make[1]: Leaving directory `/products/mplayer/MPlayer-0.18pre5/libavcodec' make: *** [libavcodec/libavcodec.a] Error 2 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ Any suggestions? Douglas Epperson University of California, Santa Cruz phone 530-613-2439 _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 13 11:33:19 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Fri, 13 Jul 2001 11:33:19 +0200 Subject: [Mplayer-users] Processor detection in configure on SMP systems In-Reply-To: <3B4E8832.7030802@merrill-samuelson.com> References: <3B4E8832.7030802@merrill-samuelson.com> Message-ID: <01071311331906.04350@astral> On Friday, 13. July 2001 07:33, you wrote: > > Processor detection on Linux SMP systems does not work: all the entries > > in /proc/cpuinfo are duplicated for each cpu. So all the values end up > > two times in the variables like $pvendor, ... in the configure script. > > I noticed this too. It is quickly fixed with a `head -1` at the > end of all the processor definitions: > Thanks, it has been applied to cvs. -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Fri Jul 13 16:33:18 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Fri, 13 Jul 2001 14:33:18 +0000 (:) Subject: [Mplayer-users] nasm, sad_mmx, and psadbw In-Reply-To: Message-ID: Hi, Douglas Epperson! On 2001-07-13 11:49:44 you wrote: >I'm compiling on a linux i586 platform. I run make and get the following >error. > >+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ >make -C libavcodec >make[1]: Entering directory >`/products/mplayer/MPlayer-0.18pre5/libavcodec' >nasm -f elf -o i386/sad_mmx.o i386/sad_mmx.s >i386/sad_mmx.s:215: parser: instruction expected >i386/sad_mmx.s:216: parser: instruction expected >i386/sad_mmx.s:216: symbol `psadbw' redefined >i386/sad_mmx.s:227: parser: instruction expected >i386/sad_mmx.s:227: symbol `psadbw' redefined >i386/sad_mmx.s:228: parser: instruction expected >i386/sad_mmx.s:228: symbol `psadbw' redefined >i386/sad_mmx.s:239: parser: instruction expected >i386/sad_mmx.s:239: symbol `psadbw' redefined >i386/sad_mmx.s:240: parser: instruction expected >i386/sad_mmx.s:240: symbol `psadbw' redefined >i386/sad_mmx.s:251: parser: instruction expected >i386/sad_mmx.s:251: symbol `psadbw' redefined >i386/sad_mmx.s:252: parser: instruction expected >i386/sad_mmx.s:252: symbol `psadbw' redefined >make[1]: *** [i386/sad_mmx.o] Error 1 >make[1]: Leaving directory `/products/mplayer/MPlayer-0.18pre5/libavcodec' >make: *** [libavcodec/libavcodec.a] Error 2 >+++++++++++++++++++++++++++++++++++++++++++++++++++++++ > >Any suggestions? > Upgrade your nasm upto 0.98 at least! Best regards! Nick (2001-07-13 14:32:47) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From creppy at freemail.hu Fri Jul 13 13:04:03 2001 From: creppy at freemail.hu (Creepy) Date: Fri, 13 Jul 2001 13:04:03 +0200 Subject: [Mplayer-users] Debian prob maybe final (thanks) References: Message-ID: <000f01c10b8b$87b859d0$0ad03c86@informatik.uniulm.de> So thanks for the ones who helped me, I think the alsa part is the problem, I could have known it, as I am not a beginner, (and I study computer science :)) ) , but I thought if there is something in the config wrong(extra, non-existing parameter) it ignores. So would I make it if I were the one taking care of this. So I hope it works, thank you. Waiting for the GUI :)))) Creepy ps.: what do I need for -vo svga ? I can't use it. :)) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 13 15:23:02 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Fri, 13 Jul 2001 15:23:02 +0200 Subject: [Mplayer-users] Debian prob maybe final (thanks) In-Reply-To: <000f01c10b8b$87b859d0$0ad03c86@informatik.uniulm.de> References: <000f01c10b8b$87b859d0$0ad03c86@informatik.uniulm.de> Message-ID: <01071315230208.04350@astral> On Friday, 13. July 2001 13:04, you wrote: > So thanks for the ones who helped me, I think the alsa part is the problem, > I could have known it, as I am not a beginner, (and I study computer > science > > :)) ) , but I thought if there is something in the config wrong(extra, > > non-existing parameter) it ignores. So would I make it if I were the one > taking care of this. So I hope it works, thank you. Waiting for the GUI This parameter was used in earlier version, so for people still used to it, it gives out an error message, when that switch is used, so users know they may not use it anymore. If we wouldn't do this mplayer would complain about a parse error in commandline cause the option would be unknown then. see cfg-mplayer.h to see how that stuff is organized. > > :)))) > > Creepy > ps.: what do I need for -vo svga ? I can't use it. :)) SVGAlib and compatible graphics card. -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Fri Jul 13 18:41:28 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Fri, 13 Jul 2001 18:41:28 +0200 (CEST) Subject: [Mplayer-users] releases In-Reply-To: <1775232423.20010713103403@gmx.de> Message-ID: Is there any way to know when releases happen? i just noticed some 0.18pre5 release on freshmeat. -- Dariusz Pietrzak Excuse me, I'm cixelsyd today _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 13 20:41:46 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 13 Jul 2001 20:41:46 +0200 (CEST) Subject: [Mplayer-users] adjusting brightness In-Reply-To: <01071311452907.04350@astral> Message-ID: <200107131841.UAA21342@thot.banki.hu> Hi, > > an easy way to bump up the brightness? Or is this > > codec and/or video device dependent? > > Thanks for any good tips, or bad hacks. > hmm I can give two hints (both untested), first the dshow divx codec allows > changing brightness of the image, so commented out code for that is in > mplayer.c (search for divx_quality, you'll get the ide what the correct stuff > is). > Second tip imho XVideo extension allows for brightness etc. control, so that > could be done somewhere in libvo/vo_xv.c. > Think Arpi also suggested, that brightness could be changed on YUV to RGB > conversion used by -vo x11, dga and others by changing the constants used. exactly. it's on my TODO, but no time for it nowdays. after finished libvo2, i'll rewrite the whole OSD stuff, and add support for these settings along others (like audio samplerate, fps, volume, quality etc) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Fri Jul 13 20:53:55 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Fri, 13 Jul 2001 20:53:55 +0200 (MET DST) Subject: [Mplayer-users] Compiling without MMX Message-ID: Hi, when was the last time any of you compiled with --disable-mmx on a MMX machine? Because mplayer does not compile here after configuring so. It didn't two weeks ago and still it does not. It seems like a wrong call (or a missing #ifdef ?), output is: > ./configure --disable-mmx [...] Checking for cpu vendor ... AuthenticAMD ( 5:8:0 ) Checking for cpu type ... AMD-K6(tm) 3D processor Optimizing to ... k6 Checking for mmx support ... no Checking for mmx2 support ... no Checking for 3dnow support ... yes Checking for 3dnowex support ... no Checking for sse support ... no Checking for mtrr support ... no [...] > make [...] make[1]: Entering directory `/home/lampert/mycvs/main/mp3lib' gcc -c -O4 -march=k6 -mcpu=k6 -pipe -ffast-math -fomit-frame-pointer -I/usr/local/include -o sr1.o sr1.c sr1.c: In function `MP3_Init': sr1.c:462: `synth_1to1_MMX' undeclared (first use in this function) sr1.c:462: (Each undeclared identifier is reported only once sr1.c:462: for each function it appears in.) make[1]: *** [sr1.o] Error 1 If I add an (e.g. empty) routine make_decode_tables_MMX() in mp3lib/tabinit.c everything compiles through. How to fix this? chl -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From udz20 at netscape.net Fri Jul 13 20:59:01 2001 From: udz20 at netscape.net (Uri Zarfaty) Date: Fri, 13 Jul 2001 14:59:01 -0400 Subject: [Mplayer-users] SDL:aalib Message-ID: <5625EE96.260736FF.00015B8D@netscape.net> First, thanks to the developers for a great app. Got it working no probs on RH 7.1 (using kgcc as compiler). The only thing that doesn't seem to work is SDL:aalib mode. X11 and DGA work fine, but when I try aalib I get: VO: [sdl] 640x480 => 640x480 Packed YUY2 VO: Description: SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!) SDL: Initializing of SDL failed: No available video device. FATAL: Cannot initialize video driver! Is there anything obvious I'm missing? Help would be much appreciated... Uri Zarfaty __________________________________________________________________ Get your own FREE, personal Netscape Webmail account today at http://webmail.netscape.com/ _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Fri Jul 13 21:02:55 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Fri, 13 Jul 2001 21:02:55 +0200 (MET DST) Subject: [Mplayer-users] compile without MMX Message-ID: Hi again, sorry, last lines about compiling without MMX were bullshit, I was in the wrong directory again. It still does not compile, and one of the reasons might be in mp3lib/sr1.c #ifdef HAVE_3DNOW if ( _3dnow ) { synth_func=synth_1to1_MMX; dct36_func=dct36_3dnow; dct64_MMX_func=dct64_MMX_3dnow; } else #endif This assumes, that every 3Dnow machine has MMX. My (and former Dariusz') K6-II has 3DNOW and MMX, but MMX is broken. So I want to compile without. I guess, --disable-MMX should enforce _all_ MMX to be removed, regardless of 3Dnow. chl -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lgb at lgb.hu Fri Jul 13 21:15:05 2001 From: lgb at lgb.hu (=?iso-8859-2?B?R+Fib3IgTOlu4XJ0?=) Date: Fri, 13 Jul 2001 21:15:05 +0200 Subject: [Mplayer-users] compile without MMX In-Reply-To: Message-ID: <20010713211505.A9810@vega.digitel2002.hu> On Fri, Jul 13, 2001 at 09:02:55PM +0200, Christoph Lampert wrote: > This assumes, that every 3Dnow machine has MMX. My (and former Dariusz') > K6-II has 3DNOW and MMX, but MMX is broken. So I want to compile without. > > I guess, --disable-MMX should enforce _all_ MMX to be removed, regardless > of 3Dnow. ?? I've got AMD K6-2 and no problem with MMX at all. MPlayer works great. -- --[ G?bor L?n?rt ]---[ Vivendi Telecom Hungary ]---------[ lgb at lgb.hu ]-- U have 8 bit comp or chip of them and it's unused or to be sold? Call me! -------[ +36 30 2270823 ]------> LGB <-----[ Linux/UNIX/8bit 4ever ]----- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 13 21:24:09 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 13 Jul 2001 21:24:09 +0200 (CEST) Subject: [Mplayer-users] compile without MMX In-Reply-To: Message-ID: <200107131924.VAA11906@thot.banki.hu> Hi, > This assumes, that every 3Dnow machine has MMX. My (and former Dariusz') > K6-II has 3DNOW and MMX, but MMX is broken. So I want to compile without. > > I guess, --disable-MMX should enforce _all_ MMX to be removed, regardless > of 3Dnow. > it is not possible (at least without many extra work), because most 3dnow code uses MMX too, overlapped with 3dnow stuff. so most of 3dnow code must be disabled too... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 13 21:24:48 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Fri, 13 Jul 2001 21:24:48 +0200 Subject: [Mplayer-users] SDL:aalib In-Reply-To: <5625EE96.260736FF.00015B8D@netscape.net> References: <5625EE96.260736FF.00015B8D@netscape.net> Message-ID: <0107132124480A.04350@astral> On Friday, 13. July 2001 20:59, you wrote: > First, thanks to the developers for a great app. Got it working no probs on > RH 7.1 (using kgcc as compiler). > > The only thing that doesn't seem to work is SDL:aalib mode. X11 and DGA > work fine, but when I try aalib I get: > > VO: [sdl] 640x480 => 640x480 Packed YUY2 > VO: Description: SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!) > SDL: Initializing of SDL failed: No available video device. > FATAL: Cannot initialize video driver! > > Is there anything obvious I'm missing? > Help would be much appreciated... have you compiled SDLlib with aalib support? > > Uri Zarfaty -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From falk at lunat23.de Fri Jul 13 21:15:07 2001 From: falk at lunat23.de (Falk Schubert) Date: Fri, 13 Jul 2001 21:15:07 +0200 Subject: [Mplayer-users] libac3 and sse Message-ID: <20010713211507.7735e9b9.falk@lunat23.de> Hi, that's how the appropriate config.h lines look like: /* Extension defines */ #undef HAVE_MLIB // available only on solaris #undef HAVE_3DNOW // only define if you have 3DNOW (AMD k6-2, AMD Athlon, iDT WinChip, etc.) #undef HAVE_3DNOWEX // only define if you have 3DNOWEX (AMD Athlon, etc.) #define HAVE_MMX // only define if you have MMX #define HAVE_MMX2 // only define if you have MMX2 #define HAVE_SSE // only define if you have SSE (Intel Pentium III or Celero n II) Unfortunately I am not that familiar with c yet, but I am working on it;) So if you need more infos, just contact... thanks for the fast response... falk -- enjoy your day! Falk Schubert Joellenbeckerstr. 287 33613 Bielefeld _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Fri Jul 13 21:31:05 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Fri, 13 Jul 2001 21:31:05 +0200 (MET DST) Subject: [Mplayer-users] compile without MMX In-Reply-To: <20010713211505.A9810@vega.digitel2002.hu> Message-ID: On Fri, 13 Jul 2001, [iso-8859-2] G?bor L?n?rt wrote: > > ?? I've got AMD K6-2 and no problem with MMX at all. MPlayer works great. > Yeah, I know. It seems only this CPU is broken. I had to patch all binary stuff (DivX, Realplayer) to ignore MMX, as well. Otherwise picture is full of color garbage. :-( But at least it's faster than the previous K6. gruel _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Fri Jul 13 21:32:47 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Fri, 13 Jul 2001 21:32:47 +0200 (MET DST) Subject: [Mplayer-users] compile without MMX In-Reply-To: <200107131924.VAA11906@thot.banki.hu> Message-ID: On Fri, 13 Jul 2001, Arpi wrote: > Hi, > > > This assumes, that every 3Dnow machine has MMX. My (and former Dariusz') > > K6-II has 3DNOW and MMX, but MMX is broken. So I want to compile without. > > > > I guess, --disable-MMX should enforce _all_ MMX to be removed, regardless > > of 3Dnow. > > > > it is not possible (at least without many extra work), because most > 3dnow code uses MMX too, overlapped with 3dnow stuff. so most of > 3dnow code must be disabled too... Then --disable-MMX should automatically imply --disable-3dnow. It's not nice to have a configure-option, that prevents mplayer (or mp3lib) from compiling. gruel _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 13 21:32:17 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Fri, 13 Jul 2001 21:32:17 +0200 Subject: [Mplayer-users] compile without MMX In-Reply-To: References: Message-ID: <0107132132170C.04350@astral> On Friday, 13. July 2001 21:25, you wrote: > On Fri, 13 Jul 2001, [iso-8859-2] G?bor L?n?rt wrote: > > On Fri, Jul 13, 2001 at 09:02:55PM +0200, Christoph Lampert wrote: > > > This assumes, that every 3Dnow machine has MMX. My (and former > > > Dariusz') K6-II has 3DNOW and MMX, but MMX is broken. So I want to > > > compile without. > > > > > > I guess, --disable-MMX should enforce _all_ MMX to be removed, > > > regardless of 3Dnow. > > > > ?? I've got AMD K6-2 and no problem with MMX at all. MPlayer works great. > > Yeah, so do I .. but early K6-2's had broken MMX as I understand it. Thats > why I always upgrade late :) well if it's really broken, then it's most probable only single instructions, that cause probs, test if it works and if not you could try debugging mplayer to find instructions that cause probs and then it could be tried to find a workaround for that then (by using some other instructions). -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 13 21:28:15 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Fri, 13 Jul 2001 21:28:15 +0200 Subject: [Mplayer-users] compile without MMX In-Reply-To: <20010713211505.A9810@vega.digitel2002.hu> References: <20010713211505.A9810@vega.digitel2002.hu> Message-ID: <0107132128150B.04350@astral> On Friday, 13. July 2001 21:15, you wrote: > On Fri, Jul 13, 2001 at 09:02:55PM +0200, Christoph Lampert wrote: > > This assumes, that every 3Dnow machine has MMX. My (and former Dariusz') > > K6-II has 3DNOW and MMX, but MMX is broken. So I want to compile without. > > > > I guess, --disable-MMX should enforce _all_ MMX to be removed, regardless > > of 3Dnow. > > ?? I've got AMD K6-2 and no problem with MMX at all. MPlayer works great. it's very starnge stuff then, cause 3dnow uses mmx registers and 3dnow cpde can often be mixed with normal mmx instructions (actually you could call 3now a floating point enhancement to mmx as SSE is on P3/4/Cel2), so it's quite hard, if possible at all to achieve that. -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From mgraffam at idsi.net Fri Jul 13 21:25:38 2001 From: mgraffam at idsi.net (mgraffam at idsi.net) Date: Fri, 13 Jul 2001 15:25:38 -0400 (EDT) Subject: [Mplayer-users] compile without MMX In-Reply-To: <20010713211505.A9810@vega.digitel2002.hu> Message-ID: On Fri, 13 Jul 2001, [iso-8859-2] G?bor L?n?rt wrote: > On Fri, Jul 13, 2001 at 09:02:55PM +0200, Christoph Lampert wrote: > > This assumes, that every 3Dnow machine has MMX. My (and former Dariusz') > > K6-II has 3DNOW and MMX, but MMX is broken. So I want to compile without. > > > > I guess, --disable-MMX should enforce _all_ MMX to be removed, regardless > > of 3Dnow. > > ?? I've got AMD K6-2 and no problem with MMX at all. MPlayer works great. Yeah, so do I .. but early K6-2's had broken MMX as I understand it. Thats why I always upgrade late :) -- Michael Graffam (mgraffam at idsi.net) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 13 21:37:08 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Fri, 13 Jul 2001 21:37:08 +0200 Subject: [Mplayer-users] libac3 and sse In-Reply-To: <20010713211507.7735e9b9.falk@lunat23.de> References: <20010713211507.7735e9b9.falk@lunat23.de> Message-ID: <0107132137080D.04350@astral> On Friday, 13. July 2001 21:15, you wrote: > Hi, > > that's how the appropriate config.h lines look like: > > > /* Extension defines */ > #undef HAVE_MLIB // available only on solaris > #undef HAVE_3DNOW // only define if you have 3DNOW (AMD k6-2, AMD > Athlon, iDT > WinChip, etc.) > #undef HAVE_3DNOWEX // only define if you have 3DNOWEX (AMD Athlon, etc.) > #define HAVE_MMX // only define if you have MMX > #define HAVE_MMX2 // only define if you have MMX2 > #define HAVE_SSE // only define if you have SSE (Intel Pentium III or > Celero > n II) > hmm, can you please send you /proc/cpuinfo and kernel version? (cat /proc/cpuinfo and uname -a (hmm or did you write already it's 2.4.6, then don't need it of course) And did you compile your kernel for the correct cpu type? (I think it should also work if not, but not 100% sure) > > Unfortunately I am not that familiar with c yet, but I am working on it;) > So > if you need more infos, just contact... > > thanks for the fast response... > > falk -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Fri Jul 13 21:45:08 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Fri, 13 Jul 2001 21:45:08 +0200 (MET DST) Subject: [Mplayer-users] compile without MMX In-Reply-To: <0107132132170C.04350@astral> Message-ID: On Fri, 13 Jul 2001, Felix Buenemann wrote: > > Yeah, so do I .. but early K6-2's had broken MMX as I understand it. Thats > > why I always upgrade late :) > well if it's really broken, then it's most probable only single instructions, > that cause probs, test if it works and if not you could try debugging mplayer > to find instructions that cause probs and then it could be tried to find a > workaround for that then (by using some other instructions). I did not hear of broken MMX in K6-2 before. However Dariusz said, it the CPU used to work with DivX (with it does not anymore). So it's most definitely one or a few recently broken MMX instructions. Problem is, I have no test-program that identifies this and trying by hand is much more work than I would like to (I know my way around assembler, but I'm not a i386/MMX professional). Too bad the instruction does not crash, but simply gives wrong results (which is wrong pictures). gruel _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 13 21:48:25 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Fri, 13 Jul 2001 21:48:25 +0200 Subject: [Mplayer-users] compile without MMX In-Reply-To: References: Message-ID: <0107132148250E.04350@astral> On Friday, 13. July 2001 21:32, you wrote: > On Fri, 13 Jul 2001, Arpi wrote: > > Hi, > > > > > This assumes, that every 3Dnow machine has MMX. My (and former > > > Dariusz') K6-II has 3DNOW and MMX, but MMX is broken. So I want to > > > compile without. > > > > > > I guess, --disable-MMX should enforce _all_ MMX to be removed, > > > regardless of 3Dnow. > > > > it is not possible (at least without many extra work), because most > > 3dnow code uses MMX too, overlapped with 3dnow stuff. so most of > > 3dnow code must be disabled too... > > Then --disable-MMX should automatically imply --disable-3dnow. > It's not nice to have a configure-option, that prevents mplayer (or > mp3lib) from compiling. yes, you are right, changed configure to do so- > > gruel > -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Fri Jul 13 22:39:27 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Fri, 13 Jul 2001 22:39:27 +0200 Subject: [Mplayer-users] Elementary streams (ES) References: <200107121814.UAA15020@thot.banki.hu> Message-ID: <000f01c10bdb$e9336f10$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* I've uploaded it ... good look ... mfg Johannes > > it is the format, in which a dvb-s card can record to harddisc. > > i could send you such a file for testing if you want. > upload it to ftp://mplayer.dev.hu/MPlayer/incoming _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From epperson at mail.desy.de Fri Jul 13 23:08:50 2001 From: epperson at mail.desy.de (Douglas Epperson) Date: Fri, 13 Jul 2001 23:08:50 +0200 (MEST) Subject: [Mplayer-users] nasm, sad_mmx, and psadbw In-Reply-To: Message-ID: Thank you! I thought I had downloaded the latest nasm. I was mistaken. Everything compiled. Now to install. ciao, Doug On Fri, 13 Jul 2001, Nick Kurshev wrote: > Hi, Douglas Epperson! > > On 2001-07-13 11:49:44 you wrote: > > >I'm compiling on a linux i586 platform. I run make and get the following > >error. > > > >+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > >make -C libavcodec > >make[1]: Entering directory > >`/products/mplayer/MPlayer-0.18pre5/libavcodec' > >nasm -f elf -o i386/sad_mmx.o i386/sad_mmx.s > >i386/sad_mmx.s:215: parser: instruction expected > >i386/sad_mmx.s:216: parser: instruction expected > >i386/sad_mmx.s:216: symbol `psadbw' redefined > >i386/sad_mmx.s:227: parser: instruction expected > >i386/sad_mmx.s:227: symbol `psadbw' redefined > >i386/sad_mmx.s:228: parser: instruction expected > >i386/sad_mmx.s:228: symbol `psadbw' redefined > >i386/sad_mmx.s:239: parser: instruction expected > >i386/sad_mmx.s:239: symbol `psadbw' redefined > >i386/sad_mmx.s:240: parser: instruction expected > >i386/sad_mmx.s:240: symbol `psadbw' redefined > >i386/sad_mmx.s:251: parser: instruction expected > >i386/sad_mmx.s:251: symbol `psadbw' redefined > >i386/sad_mmx.s:252: parser: instruction expected > >i386/sad_mmx.s:252: symbol `psadbw' redefined > >make[1]: *** [i386/sad_mmx.o] Error 1 > >make[1]: Leaving directory `/products/mplayer/MPlayer-0.18pre5/libavcodec' > >make: *** [libavcodec/libavcodec.a] Error 2 > >+++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > > >Any suggestions? > > > Upgrade your nasm upto 0.98 at least! > > > Best regards! Nick (2001-07-13 14:32:47) > > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From epperson at mail.desy.de Sat Jul 14 01:02:33 2001 From: epperson at mail.desy.de (Douglas Epperson) Date: Sat, 14 Jul 2001 01:02:33 +0200 (MEST) Subject: [Mplayer-users] can't initialize video driver In-Reply-To: <000f01c10b8b$87b859d0$0ad03c86@informatik.uniulm.de> Message-ID: Ok, I'm stuck again I try and launch a basic .mpg and get the folowing error: +++++++++++++++++++++++++++++++++++++++++++++++++++++++ Couldn't open /dev/mga_vid FATAL: Cannot initialize video driver! ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ When I compiled the driver I got the following output: +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ root at slugdug:/products/mplayer/MPlayer-0.18pre5/drivers# make gcc -g -O2 -Wall -D__KERNEL__ -DMODULE -include /usr/src/linux/include/linux/modversions.h -I/usr/src/linux/include -c mga_vid.c In file included from /usr/src/linux/include/linux/string.h:37, from /usr/src/linux/include/linux/signal.h:64, from /usr/src/linux/include/linux/sched.h:23, from mga_vid.c:36: /usr/src/linux/include/asm/string.h:476:17: warning: multi-line string literals are deprecated /usr/src/linux/include/asm/string.h:476:17: warning: multi-line string literals are deprecated /usr/src/linux/include/asm/string.h:476:17: warning: multi-line string literals are deprecated /usr/src/linux/include/asm/string.h:476:17: warning: multi-line string literals are deprecated In file included from /usr/src/linux/include/linux/sched.h:23, from mga_vid.c:36: /usr/src/linux/include/linux/signal.h: In function `siginitset': /usr/src/linux/include/linux/signal.h:193: warning: deprecated use of label at end of compound statement /usr/src/linux/include/linux/signal.h: In function `siginitsetinv': /usr/src/linux/include/linux/signal.h:205: warning: deprecated use of label at end of compound statement /tmp/cc9XYu9k.s: Assembler messages: /tmp/cc9XYu9k.s:55: Warning: Ignoring changed section attributes for .modinfo /tmp/cc9XYu9k.s:1066: Warning: Ignoring changed section attributes for .modinfo gcc -g -O -Wall -I/usr/src/linux/include -o mga_vid_test mga_vid_test.c mga_vid_test.c: In function `write_frame_g200': mga_vid_test.c:45: warning: implicit declaration of function `memcpy' root at slugdug:/products/mplayer/MPlayer-0.18pre5/drivers# mknod /dev/mga_vid c 178 0 root at slugdug:/products/mplayer/MPlayer-0.18pre5/drivers# chmod go+rw /dev/mga_vid ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Does anyone have any suggestions? I tried to search the dicussion board but the search wasn't working so I'm sorry if this may be a repeat question. Douglas Epperson University of California, Santa Cruz phone 530-613-2439 _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Sat Jul 14 02:53:12 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Sat, 14 Jul 2001 02:53:12 +0200 Subject: [Mplayer-users] can't initialize video driver In-Reply-To: ; from epperson@mail.desy.de on Sat, Jul 14, 2001 at 01:02:33AM +0200 References: <000f01c10b8b$87b859d0$0ad03c86@informatik.uniulm.de> Message-ID: <20010714025312.A2294@woodstock.localdomain> It's the Question that drives us, Douglas Epperson : > root at slugdug:/products/mplayer/MPlayer-0.18pre5/drivers# mknod > /dev/mga_vid c 178 0 Do you have a matrox card? If no, then rm -f /dev/mga_vid then recompile. If yes, compile and install mga_vid kernel module. (RTFM) -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From nickols_k at mail.ru Sat Jul 14 11:56:51 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Sat, 14 Jul 2001 09:56:51 +0000 (:) Subject: [Mplayer-users] compile without MMX Message-ID: Hi, Christoph Lampert! On 2001-07-13 21:45:08 you wrote: >On Fri, 13 Jul 2001, Felix Buenemann wrote: > > >> > Yeah, so do I .. but early K6-2's had broken MMX as I understand it. Thats >> > why I always upgrade late :) >> well if it's really broken, then it's most probable only single instructions, >> that cause probs, test if it works and if not you could try debugging mplayer >> to find instructions that cause probs and then it could be tried to find a >> workaround for that then (by using some other instructions). > >I did not hear of broken MMX in K6-2 before. However Dariusz said, it >the CPU used to work with DivX (with it does not anymore). So it's most definitely >one or a few recently broken MMX instructions. >Problem is, I have no test-program that identifies this and trying by >hand is much more work than I would like to (I know my way around >assembler, but I'm not a i386/MMX professional). >Too bad the instruction does not crash, but simply gives wrong results >(which is wrong pictures). > Yes! About this problem I've read in internet (sorry! I forgot the name of that site) In short: problem was: under MS Explorer some AMD's chips (k6-2, k6-III or some earlier Athlons-0.25 mkm) doesn't show correctly JPEG pictures (GIF - o'k). This distortion was like color snow (there was printed a sample of picture). Probably there was solution to avoid this problem - try to find out in inet similar materials - it may help you. Best regards! Nick (2001-07-14 09:45:23) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From tcwitte at wish.net Sat Jul 14 10:57:49 2001 From: tcwitte at wish.net (Taco Witte) Date: Sat, 14 Jul 2001 10:57:49 +0200 Subject: [Mplayer-users] can't initialize video driver References: Message-ID: <3B50098D.3010307@wish.net> Douglas Epperson wrote: > When I compiled the driver I got the following output: > (snap) > > Does anyone have any suggestions? > What kernel version do you use? I currently use one of the 2.4 series (I believe 2.4.5), and that works. (BTW: this thread should maybe be on mplayer-matrox) With regards, Taco Witte _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From rfowkar at yahoo.com Fri Jul 13 22:15:15 2001 From: rfowkar at yahoo.com (Rajesh Fowkar) Date: Fri, 13 Jul 2001 20:15:15 +0000 Subject: [Mplayer-users] Debian Prob. In-Reply-To: <1775232423.20010713103403@gmx.de> References: <000f01c10b73$dba7b3f0$82d03c86@informatik.uniulm.de> <1775232423.20010713103403@gmx.de> Message-ID: <20010713201515.E723@debian> Felix B?nemann saw fit to inform me that: >Hello Creepy, > >Friday, July 13, 2001, 10:14:36 AM, you wrote: > >C> So the config is like: ^^ Felix. Cann't u keep C> to only > character ? This creates problem for the mutt users. mutt users are used to seeing colored messages but this C> business creates problems. No colors and it looks like I am reading mail from one of the windos clients :-) Flames to /dev/null please ! Thanks a lot -- Saludos... :-) ------------------------------------------------------------------------------ Rajesh Fowkar rfowkar at yahoo.com Kurtarkar Nagari,Bldg-C,T4, http://rajesh.computers.webjump.com Santacruz,Ponda-Goa-403401-INDIA Powered By : Debian GNU/Linux 2.2 R-3 Kernel 2.4.6 & Mutt 1.3.19i IceWM 1.0.8-6 & KDE 2.1 "Silence is the true friend that never betrays." - Confucious ------------------------------------------------------------------------------ _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sat Jul 14 20:33:27 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Sat, 14 Jul 2001 20:33:27 +0200 Subject: [Mplayer-users] Debian Prob. In-Reply-To: <20010713201515.E723@debian> References: <000f01c10b73$dba7b3f0$82d03c86@informatik.uniulm.de> <1775232423.20010713103403@gmx.de> <20010713201515.E723@debian> Message-ID: <112127596514.20010714203327@gmx.de> Hello Rajesh, Friday, July 13, 2001, 10:15:15 PM, you wrote: > Felix B?nemann saw fit to inform me that: >>Hello Creepy, >> >>Friday, July 13, 2001, 10:14:36 AM, you wrote: >> >>C> So the config is like: > ^^ > Felix. Cann't u keep C> to only > character ? > This creates problem for the mutt users. mutt users are used to seeing colored messages but this C>> business creates problems. No colors and it looks like I am > reading mail from one of the windos clients :-) ok, changed. > Flames to /dev/null please ! yea > Thanks a lot -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From epperson at mail.desy.de Sat Jul 14 21:14:41 2001 From: epperson at mail.desy.de (Douglas Epperson) Date: Sat, 14 Jul 2001 21:14:41 +0200 (MEST) Subject: [Mplayer-users] can't initialize video driver In-Reply-To: <20010714025312.A2294@woodstock.localdomain> Message-ID: Thank you for your help. It works with .mpg at least. The rest is still to test. > Do you have a matrox card? If no, then rm -f /dev/mga_vid then recompile. > If yes, compile and install mga_vid kernel module. > (RTFM) As far as "RTFM" goes, that was my problem. I blindly followed steps 1-5 in DOCS/INSTALL. I admit, I was puzzled by step two. > -- > Gabucino > Again, thank you for your help. Doug _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From rfowkar at yahoo.com Sun Jul 15 15:34:24 2001 From: rfowkar at yahoo.com (Rajesh Fowkar) Date: Sun, 15 Jul 2001 13:34:24 +0000 Subject: [Mplayer-users] Debian Prob. In-Reply-To: <112127596514.20010714203327@gmx.de> References: <000f01c10b73$dba7b3f0$82d03c86@informatik.uniulm.de> <1775232423.20010713103403@gmx.de> <20010713201515.E723@debian> <112127596514.20010714203327@gmx.de> Message-ID: <20010715133424.B317@debian> Felix B?nemann saw fit to inform me that: >Hello Rajesh, > >Friday, July 13, 2001, 10:15:15 PM, you wrote: > >> Felix B?nemann saw fit to inform me that: >>>Hello Creepy, >>> >>>Friday, July 13, 2001, 10:14:36 AM, you wrote: >>> >>>C> So the config is like: >> ^^ > >> Felix. Cann't u keep C> to only > character ? >> This creates problem for the mutt users. mutt users are used to seeing colored >messages but this C>> business creates problems. No colors and it looks like I am >> reading mail from one of the windos clients :-) >ok, changed. >> Flames to /dev/null please ! >yea Thanks Felix. However I got the regexp to get colors for that kind of stuff too. set quote_regexp="^ *[a-zA-Z=]*[>]" # regexp to catch quoted text Now I get colors even with Felix>. u can even continue if u want. Fellow mutt users can use the above settigns in muttrc for this. Warm Regards -- Saludos... :-) ------------------------------------------------------------------------------ Rajesh Fowkar rfowkar at yahoo.com Kurtarkar Nagari,Bldg-C,T4, http://rajesh.computers.webjump.com Santacruz,Ponda-Goa-403401-INDIA Powered By : Debian GNU/Linux 2.2 R-3 Kernel 2.4.6 & Mutt 1.3.19i IceWM 1.0.8-6 & KDE 2.1 "Silence is the true friend that never betrays." - Confucious ------------------------------------------------------------------------------ _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From hellmuth at cs.tu-berlin.de Sun Jul 15 13:18:58 2001 From: hellmuth at cs.tu-berlin.de (Helmut Manck) Date: Sun, 15 Jul 2001 13:18:58 +0200 Subject: [Mplayer-users] MPlayer 0.17a large file support Message-ID: <3B517C22.9161BDE@cs.tu-berlin.de> Hi, I dont know whether somebody did this before anyway. accessing mpg-files larger than 2GB was not possible for me. I modified mplayer 0.17a a bit. This version works for me. I might have modified too much and the patch is not tested very well. Best regards, Helmut Manck hellmuth at cs.tu-berlin.de Works on Redhat7.1 Kernel 2.4.2 -------------- next part -------------- A non-text attachment was scrubbed... Name: mplayer.patch.gz Type: application/x-gzip Size: 3158 bytes Desc: not available URL: From atmosfear at users.sourceforge.net Sun Jul 15 14:34:40 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 15 Jul 2001 14:34:40 +0200 Subject: [Mplayer-users] MPlayer 0.17a large file support In-Reply-To: <3B517C22.9161BDE@cs.tu-berlin.de> References: <3B517C22.9161BDE@cs.tu-berlin.de> Message-ID: <01071514344005.13471@astral> On Sunday, 15. July 2001 13:18, you wrote: > Hi, > > I dont know whether somebody did this before anyway. > accessing mpg-files larger than 2GB was not possible for me. I modified > mplayer 0.17a a bit. This version works for me. > > I might have modified too much and the patch is not tested very well. Steven Davies already worked on large file suppoert, but I don't know if his patch has already been commited to cvs. > > Best regards, Helmut Manck > hellmuth at cs.tu-berlin.de > > > Works on Redhat7.1 Kernel 2.4.2 -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Sun Jul 15 15:35:00 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Sun, 15 Jul 2001 15:35:00 +0200 Subject: [Mplayer-users] MPlayer 0.17a large file support In-Reply-To: <01071514344005.13471@astral>; from atmosfear@users.sourceforge.net on Sun, Jul 15, 2001 at 02:34:40PM +0200 References: <3B517C22.9161BDE@cs.tu-berlin.de> <01071514344005.13471@astral> Message-ID: <20010715153500.A21263@woodstock.localdomain> It's the Question that drives us, Felix Buenemann : > > I might have modified too much and the patch is not tested very well. > Steven Davies already worked on large file suppoert, but I don't know if his > patch has already been commited to cvs. I think it WAS commited some time ago, but Arpi didn't like it, so it's now removed. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From steve at daviesfam.org Sun Jul 15 18:06:07 2001 From: steve at daviesfam.org (Stephen Davies) Date: Sun, 15 Jul 2001 17:06:07 +0100 (BST) Subject: [Mplayer-users] MPlayer 0.17a large file support In-Reply-To: <01071514344005.13471@astral> Message-ID: On Sun, 15 Jul 2001, Felix Buenemann wrote: > Steven Davies already worked on large file suppoert, but I don't know if his > patch has already been commited to cvs. Hi, My patch is still available if anyone wants to commit it. I think at the time the view was to wait until 0.18 is done. On the other hand - a lot of much more radical stuff went in in the meantime ;-) Steve _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From steve at daviesfam.org Sun Jul 15 18:07:28 2001 From: steve at daviesfam.org (Stephen Davies) Date: Sun, 15 Jul 2001 17:07:28 +0100 (BST) Subject: [Mplayer-users] MPlayer 0.17a large file support In-Reply-To: <20010715153500.A21263@woodstock.localdomain> Message-ID: On Sun, 15 Jul 2001, Gabucino wrote: > I think it WAS commited some time ago, but Arpi didn't like it, > so it's now removed. I don't think that's right. Or, if it is, A'rpi will you tell me what you don't like about it. Steve _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From creppy at freemail.hu Sun Jul 15 18:39:53 2001 From: creppy at freemail.hu (kerdezz) Date: Sun, 15 Jul 2001 18:39:53 +0200 (CEST) Subject: [Mplayer-users] re: sdl:adlib In-Reply-To: Message-ID: aadlib is sound. if it complains about video driver(cannot initialize), then you wrote -vo instead of -ao. This may be it. By the way the debian problem is done, it works, thanks for the guys around there:) Bye Creepy > The only thing that doesn't seem to work is SDL:aalib mode. X11 and DGA work fine, but when I try aalib I get: > > VO: [sdl] 640x480 => 640x480 Packed YUY2 > VO: Description: SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!) > SDL: Initializing of SDL failed: No available video device. > FATAL: Cannot initialize video driver! > > Is there anything obvious I'm missing? > Help would be much appreciated... > > Uri Zarfaty _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lgb at lgb.hu Sun Jul 15 18:50:01 2001 From: lgb at lgb.hu (=?iso-8859-2?B?R+Fib3IgTOlu4XJ0?=) Date: Sun, 15 Jul 2001 18:50:01 +0200 Subject: [Mplayer-users] re: sdl:adlib In-Reply-To: Message-ID: <20010715185001.A7294@vega.digitel2002.hu> On Sun, Jul 15, 2001 at 06:39:53PM +0200, kerdezz wrote: > aadlib is sound. if it complains about video driver(cannot > initialize), then you wrote -vo instead of -ao. This may be > it. Hemmmm? aadlib? What's that? If you mean aalib, it's a library which can render video onto ASCII screen. I don't understand your opinion about the nexus between 'aadlib' and 'sound'. -- --[ G?bor L?n?rt ]---[ Vivendi Telecom Hungary ]---------[ lgb at lgb.hu ]-- U have 8 bit comp or chip of them and it's unused or to be sold? Call me! -------[ +36 30 2270823 ]------> LGB <-----[ Linux/UNIX/8bit 4ever ]----- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 15 19:04:47 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Sun, 15 Jul 2001 19:04:47 +0200 Subject: [Mplayer-users] MPlayer 0.17a large file support In-Reply-To: References: Message-ID: <11026716536.20010715190447@gmx.de> Hello Stephen, Sunday, July 15, 2001, 6:06:07 PM, you wrote: > On Sun, 15 Jul 2001, Felix Buenemann wrote: >> Steven Davies already worked on large file suppoert, but I don't know if his >> patch has already been commited to cvs. > Hi, > My patch is still available if anyone wants to commit it. I think at the > time the view was to wait until 0.18 is done. > On the other hand - a lot of much more radical stuff went in in the > meantime ;-) yea, we admit we can't do releases :) (feature junkies, are we?) btw. don't think arpi didn't like the patch. > Steve -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 15 19:06:12 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-2?B?RmVsaXggQvxuZW1hbm4=?=) Date: Sun, 15 Jul 2001 19:06:12 +0200 Subject: [Mplayer-users] re: sdl:adlib In-Reply-To: <20010715185001.A7294@vega.digitel2002.hu> References: <20010715185001.A7294@vega.digitel2002.hu> Message-ID: <10226801067.20010715190612@gmx.de> Hello G?bor, Sunday, July 15, 2001, 6:50:01 PM, you wrote: > On Sun, Jul 15, 2001 at 06:39:53PM +0200, kerdezz wrote: >> aadlib is sound. if it complains about video driver(cannot >> initialize), then you wrote -vo instead of -ao. This may be >> it. > Hemmmm? > aadlib? What's that? If you mean aalib, it's a library which can > render video onto ASCII screen. I don't understand your opinion about > the nexus between 'aadlib' and 'sound'. remember some year agvo adlib soundcards were very popular (guess around 1992 or so). Monkey Island for exp supports adlib compatible soundcards. -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lgb at lgb.hu Sun Jul 15 19:27:13 2001 From: lgb at lgb.hu (=?iso-8859-2?B?R+Fib3IgTOlu4XJ0?=) Date: Sun, 15 Jul 2001 19:27:13 +0200 Subject: [Mplayer-users] re: sdl:adlib In-Reply-To: <10226801067.20010715190612@gmx.de> Message-ID: <20010715192713.B7294@vega.digitel2002.hu> On Sun, Jul 15, 2001 at 07:06:12PM +0200, Felix B?nemann wrote: > Hello G?bor, > > Sunday, July 15, 2001, 6:50:01 PM, you wrote: > > > On Sun, Jul 15, 2001 at 06:39:53PM +0200, kerdezz wrote: > >> aadlib is sound. if it complains about video driver(cannot > >> initialize), then you wrote -vo instead of -ao. This may be > >> it. > > > Hemmmm? > > aadlib? What's that? If you mean aalib, it's a library which can > > render video onto ASCII screen. I don't understand your opinion about > > the nexus between 'aadlib' and 'sound'. > remember some year agvo adlib soundcards were very popular (guess > around 1992 or so). Monkey Island for exp supports adlib compatible > soundcards. Ah yeah ;-) So ADLIB and don't AADLIB or something similar. Yes I know AdLib (I even wrote S3M FM module player for AdLib in assembly). Sorry I did not figure out the meaning of 'aadlib' ;-) -- --[ G?bor L?n?rt ]---[ Vivendi Telecom Hungary ]---------[ lgb at lgb.hu ]-- U have 8 bit comp or chip of them and it's unused or to be sold? Call me! -------[ +36 30 2270823 ]------> LGB <-----[ Linux/UNIX/8bit 4ever ]----- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Sun Jul 15 19:41:16 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Sun, 15 Jul 2001 19:41:16 +0200 Subject: [Mplayer-users] MPlayer 0.17a large file support In-Reply-To: <11026716536.20010715190447@gmx.de>; from atmosfear@users.sourceforge.net on Sun, Jul 15, 2001 at 07:04:47PM +0200 References: <11026716536.20010715190447@gmx.de> Message-ID: <20010715194116.A21556@woodstock.localdomain> It's the Question that drives us, Felix B?nemann : > btw. don't think arpi didn't like the patch. Dunno.. When I ask him if I should document it, he told me he'll remove it because it's too big a hack. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From arpi at thot.banki.hu Sun Jul 15 20:26:29 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 15 Jul 2001 20:26:29 +0200 (CEST) Subject: [Mplayer-users] MPlayer 0.17a large file support In-Reply-To: <20010715153500.A21263@woodstock.localdomain> Message-ID: <200107151826.UAA42866@thot.banki.hu> Hi, > It's the Question that drives us, Felix Buenemann : > > > I might have modified too much and the patch is not tested very well. > > Steven Davies already worked on large file suppoert, but I don't know if his > > patch has already been commited to cvs. > I think it WAS commited some time ago, but Arpi didn't like it, > so it's now removed. no, it was never commited. it was planned after the 0.18 release, because it needs some testing. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 15 20:25:06 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 15 Jul 2001 20:25:06 +0200 (CEST) Subject: [Mplayer-users] MPlayer 0.17a large file support In-Reply-To: <01071514344005.13471@astral> Message-ID: <200107151825.UAA29514@thot.banki.hu> Hi, > > I dont know whether somebody did this before anyway. > > accessing mpg-files larger than 2GB was not possible for me. I modified > > mplayer 0.17a a bit. This version works for me. it's useless, because near everything has been rewritten/redesigned after the 0.17 version... > > I might have modified too much and the patch is not tested very well. > Steven Davies already worked on large file suppoert, but I don't know if his > patch has already been commited to cvs. it wasn't yet, because i found some minor problems with it. they are fixed (except the printf long long problems, they may broke portability but it doesn't matter yet) i wanted to commit it after the 0.18 releasse, but it seems to 0.18 never released :( A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From db002i at mail.rochester.edu Sun Jul 15 22:16:28 2001 From: db002i at mail.rochester.edu (Dan Berdine) Date: Sun, 15 Jul 2001 16:16:28 -0400 Subject: [Mplayer-users] Error putting data into input pin ffffff9c Message-ID: <200107152017.f6FKHJe17317449@mail1.ats.rochester.edu> I recently got mplayer working on my own machine (works great, I'v tried half a dozen players and this is the first that works) and have been trying to install it (remotely unfortunatly) for a friend. I'v done everything the same as far as I can tell, but obviously something has gone wrong. Below I have attached the output from mplayer -vo sdl -ao sdl . The system is Debian Woody on a PII based system (no MMX). My own system is Debian Unstable on a K7. Both have SDL 1.2, but could some other version difference be the source of my problem? On my own system I can also play movies from console with -vo fbdev, tho audio won't work. This gives a different set of errors on my friends machine, but these seem the most helpful. The Audio: no sound line made me curious so we ran with -ao null, but it didn't seem to help any. Any suggestions are welcome, thanks! -Dan MPlayer 0.18pre5(C) 2000-2001 Arpad Gereoffy Reading /home/ellie/.mplayer/codecs.conf: 15 audio & 32 video codecs font: can't open file: /home/ellie/.mplayer/font/font.desc Detected AVI file format! ==> Found video stream: 0 ==> Found audio stream: 1 AVI: No Audio stream found... ->nosound VIDEO: [MP43] 352x288 24bpp 20.00 fps 460.4 kbps (56.2 kbyte/s) [V] filefmt:3 fourcc:0x3334504D size:352x288 fps:20.00 ftime:=0.0500 Detected video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) Loading DLL: /usr/lib/win32/divx_c32.ax OK Using DirectShow codec: divx_c32.ax DShow: using YUY2 colorspace VO: [sdl] 352x288 => 352x288 Packed YUY2 VO: Description: SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!) VO: Author: Ryan C. Gordon , Felix Buenemann Disabling DPMS stat: 1 SDL: Using driver: x11 Audio: no sound Start playing... Error putting data into input pin ffffff9c Exiting... (End of file) Successfully enabled DPMS _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 15 22:19:24 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Sun, 15 Jul 2001 22:19:24 +0200 Subject: [Mplayer-users] MPlayer 0.17a large file support In-Reply-To: <200107151826.UAA42866@thot.banki.hu> References: <200107151826.UAA42866@thot.banki.hu> Message-ID: <12238393306.20010715221924@gmx.de> Hello Arpi, Sunday, July 15, 2001, 8:26:29 PM, you wrote: > Hi, >> It's the Question that drives us, Felix Buenemann : >> > > I might have modified too much and the patch is not tested very well. >> > Steven Davies already worked on large file suppoert, but I don't know if his >> > patch has already been commited to cvs. >> I think it WAS commited some time ago, but Arpi didn't like it, >> so it's now removed. > no, it was never commited. it was planned after the 0.18 release, because > it needs some testing. So do another prelease with large file support and let users check (that's what theys're good for, aren't they? M$ does it the same way, only they don't fix the Bugs =))) > A'rpi / Astral & ESP-team -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 15 23:13:46 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 15 Jul 2001 23:13:46 +0200 Subject: [Mplayer-users] Error putting data into input pin ffffff9c In-Reply-To: <200107152017.f6FKHJe17317449@mail1.ats.rochester.edu> References: <200107152017.f6FKHJe17317449@mail1.ats.rochester.edu> Message-ID: <0107152313460A.13471@astral> On Sunday, 15. July 2001 22:16, you wrote: > I recently got mplayer working on my own machine (works great, I'v > tried half a dozen players and this is the first that works) and have > been trying to install it (remotely unfortunatly) for a friend. I'v > done everything the same as far as I can tell, but obviously something > has gone wrong. > > Below I have attached the output from mplayer -vo sdl -ao sdl . > The system is Debian Woody on a PII based system (no MMX). My own Pentium II has MMX! If it's not detected by configure gcc/binutils are outdated, think a look at DOCS/REQUIREMENTS should help. > system is Debian Unstable on a K7. Both have SDL 1.2, but could some > other version difference be the source of my problem? > > On my own system I can also play movies from console with -vo fbdev, > tho audio won't work. This gives a different set of errors on my > friends machine, but these seem the most helpful. > > The Audio: no sound line made me curious so we ran with -ao null, but > it didn't seem to help any. I think it's bad file, try another one and check if it works. For example an mpeg or standard divx. > > Any suggestions are welcome, thanks! > > -Dan > > MPlayer 0.18pre5(C) 2000-2001 Arpad Gereoffy > > Reading /home/ellie/.mplayer/codecs.conf: 15 audio & 32 video codecs > font: can't open file: /home/ellie/.mplayer/font/font.desc > Detected AVI file format! > ==> Found video stream: 0 > ==> Found audio stream: 1 > AVI: No Audio stream found... ->nosound > VIDEO: [MP43] 352x288 24bpp 20.00 fps 460.4 kbps (56.2 kbyte/s) > [V] filefmt:3 fourcc:0x3334504D size:352x288 fps:20.00 ftime:=0.0500 > Detected video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) > Loading DLL: /usr/lib/win32/divx_c32.ax OK > Using DirectShow codec: divx_c32.ax > DShow: using YUY2 colorspace > VO: [sdl] 352x288 => 352x288 Packed YUY2 > VO: Description: SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!) > VO: Author: Ryan C. Gordon , Felix Buenemann > > Disabling DPMS > stat: 1 > SDL: Using driver: x11 > Audio: no sound > Start playing... > Error putting data into input pin ffffff9c > > Exiting... (End of file) > Successfully enabled DPMS > -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From db002i at mail.rochester.edu Mon Jul 16 00:17:47 2001 From: db002i at mail.rochester.edu (Dan Berdine) Date: Sun, 15 Jul 2001 18:17:47 -0400 Subject: [Mplayer-users] Error putting data into input pin ffffff9c In-Reply-To: <0107152313460A.13471@astral> References: <200107152017.f6FKHJe17317449@mail1.ats.rochester.edu> <0107152313460A.13471@astral> Message-ID: <200107152218.f6FMIde17961486@mail1.ats.rochester.edu> On Sunday 15 July 2001 05:13 pm, you wrote: > On Sunday, 15. July 2001 22:16, you wrote: > > I recently got mplayer working on my own machine (works great, I'v > > tried half a dozen players and this is the first that works) and > > have been trying to install it (remotely unfortunatly) for a > > friend. I'v done everything the same as far as I can tell, but > > obviously something has gone wrong. > > > > Below I have attached the output from mplayer -vo sdl -ao sdl > > . The system is Debian Woody on a PII based system (no MMX). > > My own > > Pentium II has MMX! If it's not detected by configure gcc/binutils > are outdated, think a look at DOCS/REQUIREMENTS should help. I'll look at that. I forget when I figured that out, so I can't check readily... > I think it's bad file, try another one and check if it works. For > example an mpeg or standard divx. We've tried it with files xanim is able to play, and the other files were ftp'd directly from my machine, and work fine under mplayer here. The only thing I can think of is that they were origionally downloaded into windows (we thought it would be easier to play .asf and .avi files with WMP but no luck there either... somethings screwy with the windows install) and the windows partition is mounted in Linux. If there were a mac somewhere in the mix I would think something with resource forks got the mess confused, but as far as I know windows shouldn't screw with anything like that. Will try more different files, tho, to be sure :) Thanks, -Dan _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From paranoia at antionline.org Mon Jul 16 04:09:22 2001 From: paranoia at antionline.org (Satan dastou) Date: Sun, 15 Jul 2001 19:09:22 -0700 Subject: [Mplayer-users] RE: Message-ID: <200107160209.TAA07281@mail22.bigmailbox.com> An embedded and charset-unspecified text was scrubbed... Name: not available URL: From paranoia at antionline.org Mon Jul 16 04:05:30 2001 From: paranoia at antionline.org (Satan dastou) Date: Sun, 15 Jul 2001 19:05:30 -0700 Subject: [Mplayer-users] ./configure on OpenBSD (MMX) Message-ID: <200107160205.TAA07018@mail22.bigmailbox.com> An embedded and charset-unspecified text was scrubbed... Name: not available URL: From atmosfear at users.sourceforge.net Mon Jul 16 09:49:55 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Mon, 16 Jul 2001 09:49:55 +0200 Subject: [Mplayer-users] ./configure on OpenBSD (MMX) In-Reply-To: <200107160205.TAA07018@mail22.bigmailbox.com> References: <200107160205.TAA07018@mail22.bigmailbox.com> Message-ID: <0107160949550B.13471@astral> On Monday, 16. July 2001 04:05, you wrote: > Hi, > > I got the mplayer sources from cvs, now im trying to get to configure > script to run on my box (P200MMX - OpenBSD 2.9 with linux binary emulation) > > when i run > ./configure (even with --disable-MMX) > checking versiob of gcc....2.95.3 ok > The architechture of your CPU (Intel Pentium MMX("Genuine Intel" > 586-class)) is not supported by this configuration script. > > does it mean i have to buy a newer machine? lol > or what do i do next? any idea? no, P55C is supported, might be a bug in the changes J?rgen recently did to configure to support non x86 archictectures. -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 16 12:14:57 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 16 Jul 2001 12:14:57 +0200 (CEST) Subject: [Mplayer-users] Error putting data into input pin ffffff9c In-Reply-To: <200107152218.f6FMIde17961486@mail1.ats.rochester.edu> Message-ID: <200107161014.MAA27800@thot.banki.hu> Hi, > We've tried it with files xanim is able to play, and the other files ehh. xanim plays only very old avi file formats, line cvid and indeo. it can't play divx at all... mplayer plays divx too, but use directshow only for divx. so this directshow error message shouldn't be shown for such old files... maybe you has wrong codec package or codecs.conf installed? please read DOCS/BUGREPORTS... (and incude mplayer -v logs next time) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jk at tools.de Mon Jul 16 13:20:23 2001 From: jk at tools.de (Juergen Keil) Date: Mon, 16 Jul 2001 13:20:23 +0200 (MEST) Subject: [Mplayer-users] ./configure on OpenBSD (MMX) Message-ID: <200107161120.f6GBKO300378@leo.tools.intra> > I got the mplayer sources from cvs, now im trying to get to configure > script to run on my box (P200MMX - OpenBSD 2.9 with linux binary emulation) > > when i run > ./configure (even with --disable-MMX) > checking versiob of gcc....2.95.3 ok > The architechture of your CPU (Intel Pentium MMX("Genuine Intel" > 586-class)) is not supported by this configuration script. > > does it mean i have to buy a newer machine? lol No. Can you please provide the output of the following commands on OpenBSD? uname -s uname -p uname -m (I guess either uname -p or uname -m prints: Intel Pentium MMX("Genuine Intel") 586-class) There's currently no completed support for OpenBSD (or NetBSD) in the mplayer sources, anyway. FreeBSD works, though. > or what do i do next? any idea? We need someone to complete the port to OpenBSD (or NetBSD). Did you say "here, I'll do it" :-) :-) -- J?rgen Keil jk at tools.de Tools GmbH +49 (228) 9858011 _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 16 13:44:26 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 16 Jul 2001 13:44:26 +0200 (CEST) Subject: [Mplayer-users] ff-divx benchmarks... Message-ID: <200107161144.NAA13994@thot.banki.hu> Hi, I'm back from holiday, and my first thing to do was testing ffmpeg speed again :) Nick did a good job: ---------------------------- Star_Wars_Episode_1.avi VIDEO: [DIV3] 720x576 24bpp 25.00 fps 2018.4 kbps (246.4 kbyte/s) Forcing video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 73.830s VO: 16.450s A: 0.000s Sys: 0.706s = 90.986s BENCHMARK%: V: 81.1446% VO: 18.0797% A: 0.0000% Sys: 0.7757% = 100.0000% Forcing video codec: [divx] drv:2 (DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 71.874s VO: 16.189s A: 0.000s Sys: 0.702s = 88.765s BENCHMARK%: V: 80.9711% VO: 18.2376% A: 0.0000% Sys: 0.7913% = 100.0000% Forcing video codec: [ffdivx] drv:5 (FFmpeg DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 71.885s VO: 14.119s A: 0.000s Sys: 0.728s = 86.731s BENCHMARK%: V: 82.8818% VO: 16.2786% A: 0.0000% Sys: 0.8396% = 100.0000% ---------------------------- Coyote.Ugly.Sample-highbitrate-atmos.avi VIDEO: [DIV3] 640x480 24bpp 25.00 fps 1995.1 kbps (243.5 kbyte/s) Forcing video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 19.387s VO: 4.803s A: 0.000s Sys: 0.339s = 24.529s BENCHMARK%: V: 79.0376% VO: 19.5797% A: 0.0000% Sys: 1.3827% = 100.0000% Forcing video codec: [divx] drv:2 (DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 18.790s VO: 4.711s A: 0.000s Sys: 0.343s = 23.845s BENCHMARK%: V: 78.8021% VO: 19.7581% A: 0.0000% Sys: 1.4398% = 100.0000% Forcing video codec: [ffdivx] drv:5 (FFmpeg DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 21.619s VO: 3.704s A: 0.000s Sys: 0.333s = 25.656s BENCHMARK%: V: 84.2653% VO: 14.4384% A: 0.0000% Sys: 1.2963% = 100.0000% ---------------------------- I used -nosound, and -vo mga for these tests. Video decoding is still slow for low res - high bitrate case, but it's the same or faster than dshow/vfw for normal bitrate divx files! VO speed is much better for ffmpeg, because of using YV12 (12bpp) instead of YUY2 (16bpp). A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jk at tools.de Mon Jul 16 16:27:12 2001 From: jk at tools.de (Juergen Keil) Date: Mon, 16 Jul 2001 16:27:12 +0200 (MEST) Subject: [Mplayer-users] ./configure on OpenBSD (MMX) Message-ID: <200107161427.f6GERC317798@leo.tools.intra> > This message was sent from Geocrawler.com by "Johnny Tripp" > > > > #uname -mps > > OpenBSD i386 Intel Pentium/MMX ("Genuine Intel" 586 class) Unfortunately that's not useful for me because I still don't know the exact output for each of the switches, so I have no chance of adding configure support for OpenBSD. Please, run the uname commands once again, but pass only one of the switches for each invokation. I guess uname -s prints "OpenBSD". One of "uname -p" or "uname -s" seems to print "i386"; this is actually what the configure script is looking for. > -> im no programmer, but if it's suppose to work in FreeBSD should'nt it work in OpenBSD? Unfortunatelly, not. There are suble differences between the different xxxBSD variants. The mplayer code contains constructs like 'if system is freebsd, do this, else do something else'. Most of these places must be identified and probably changed to 'if system is freebsd or openbsd or netbsd, do this, else do something else'. But somethimes, even freebsd != openbsd (or freebsd != netbsd) and the changes are more difficult. As a temporary hack, you can try to change line 190 of the configure script host_arch=`uname -p 2>&1` # host's instruction set or processor type to host_arch=i386 and the configure error message you're getting is gone, but I guess that sooner or later, more problems will occur, until someone ports the code to OpenBSD. > --------------------------------------- > I got the mplayer sources from cvs, now im trying to get to configure > > script to run on my box (P200MMX - OpenBSD 2.9 with linux binary emulation) > > > > when i run > > ./configure (even with --disable-MMX) > > checking versiob of gcc....2.95.3 ok > > The architechture of your CPU (Intel Pentium MMX("Genuine Intel" > > 586-class)) is not supported by this configuration script. > > > > does it mean i have to buy a newer machine? lol > > No. > > Can you please provide the output of the following commands on OpenBSD? > > uname -s > uname -p > uname -m > > (I guess either uname -p or uname -m prints: > Intel Pentium MMX("Genuine Intel") 586-class) > > > > There's currently no completed support for OpenBSD (or NetBSD) in the mplayer > sources, anyway. FreeBSD works, though. > > > > or what do i do next? any idea? > > > We need someone to complete the port to OpenBSD (or NetBSD). > > Did you say "here, I'll do it" :-) :-) -- J?rgen Keil jk at tools.de Tools GmbH +49 (228) 9858011 _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From creppy at freemail.hu Mon Jul 16 16:57:42 2001 From: creppy at freemail.hu (Creepy) Date: Mon, 16 Jul 2001 16:57:42 +0200 Subject: [Mplayer-users] Networking with mplayer References: Message-ID: <008e01c10e07$aad8f630$0cd03c86@informatik.uniulm.de> I'm using mplayer very often in LAN to watch videos from another machines. If the file is on my machine, it goes OK, if it' is in the network, it stopps for a half a sec, and not goes smoothly. I tried to use some cache but it doesn't help. Are you planning to write some buffer-tech for this reason? My card is only 10MBit/s but 1.2 Mbyte should be alright for even divx, not only for mpeg or anything like that. But sometime it slows down, so a cache would probably help. By the way, when do we get the GUI? :)) bye, Creepy _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 16 17:03:52 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 16 Jul 2001 17:03:52 +0200 (CEST) Subject: [Mplayer-users] Networking with mplayer In-Reply-To: <008e01c10e07$aad8f630$0cd03c86@informatik.uniulm.de> Message-ID: <200107161503.RAA34250@thot.banki.hu> Hi, > I'm using mplayer very often in LAN to watch videos from another machines. > If the file is on my machine, it goes OK, if it' is in the network, it > stopps for a half a sec, and not goes smoothly. I tried to use some cache > but it doesn't help. Are you planning to write some buffer-tech for this > reason? My card is only 10MBit/s but 1.2 Mbyte should be alright for even > divx, not only for mpeg or anything like that. But sometime it slows down, > so a cache would probably help. It's planned, read TODO or this maillist... currently as a workaround, you can use TOOLS/cache.c not too perfect, but it worked for me playing divx from NFS-mounted disks, over 10MBit net. > By the way, when do we get the GUI? :)) dunno. but it should be up at end of august... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Mon Jul 16 17:53:08 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Mon, 16 Jul 2001 17:53:08 +0200 (CEST) Subject: [Mplayer-users] compile without MMX In-Reply-To: Message-ID: > Too bad the instruction does not crash, but simply gives wrong results > (which is wrong pictures). and I heard that this particular behaviour is one of the greatest things in mmx/other verctor exstensions. sorry I caused so much trouble :( d'ah, I am constanlty sorry lately, must be not my year. anyone knows when Dragon's era begins? -- Dariusz Pietrzak Excuse me, I'm cixelsyd today _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Mon Jul 16 18:41:09 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Mon, 16 Jul 2001 18:41:09 +0200 Subject: [Mplayer-users] ff-divx benchmarks... In-Reply-To: <200107161144.NAA13994@thot.banki.hu> References: <200107161144.NAA13994@thot.banki.hu> Message-ID: <20010716184108.A1210@hoth.amu.edu.pl> my results: FreeBSD 4.3 AMD K6-2 333MHz + C&T CT65554 + Xv gcc version 2.95.3 [FreeBSD] 20010315 (release) XFree86 Version 4.1.0 / X Window System (800x600x24bpp) MMX + 3DNow -nosound -benchmark [-dshow] [-vc ffdivx] history: first: first ffdivx 2001-07-10: fastmem (Nick) 2001-07-11: dsputil_mmx (Nick) 2001-07-12: dsputil 32bit (Jurgen) 2001-07-16: dsputil_mmx (Nick) Space Cowboys trailer (145s): VIDEO: [DIV3] 480x200 24bpp 24.00 fps 154.3 kbps (18.8 kbyte/s) divx: BENCHMARKs: V: 26.637s VO: 10.575s A: 0.000s Sys: 20.782s = 57.995s divxds: BENCHMARKs: V: 27.588s VO: 10.652s A: 0.000s Sys: 20.719s = 58.959s ffdivx (first): BENCHMARKs: V: 49.861s VO: 9.257s A: 0.000s Sys: 17.305s = 76.423s ffdivx (2001-07-10): BENCHMARKs: V: 49.591s VO: 9.048s A: 0.000s Sys: 17.170s = 75.809s ffdivx (2001-07-11): BENCHMARKs: V: 47.585s VO: 8.976s A: 0.000s Sys: 17.060s = 73.622s ffdivx (2001-07-12): BENCHMARKs: V: 35.031s VO: 9.155s A: 0.000s Sys: 17.309s = 61.495s ffdivx (2001-07-16): BENCHMARKs: V: 33.062s VO: 9.100s A: 0.000s Sys: 17.719s = 59.882s MI2 trailer (121s): VIDEO: [DIV3] 480x204 24bpp 24.00 fps 700.6 kbps (85.5 kbyte/s) divx: BENCHMARKs: V: 42.600s VO: 8.959s A: 0.000s Sys: 18.045s = 69.604s divxds: BENCHMARKs: V: 43.920s VO: 9.246s A: 0.000s Sys: 17.625s = 70.790s ffdivx (first): BENCHMARKs: V: 63.671s VO: 9.333s A: 0.000s Sys: 18.321s = 91.325s ffdivx (2001-07-11): BENCHMARKs: V: 59.441s VO: 9.137s A: 0.000s Sys: 18.229s = 86.808s ffdivx (2001-07-12): BENCHMARKs: V: 52.497s VO: 9.582s A: 0.000s Sys: 18.179s = 80.258s ffdivx (2001-07-16): BENCHMARKs: V: 51.008s VO: 9.193s A: 0.000s Sys: 18.575s = 78.776s Tomb Raider trailer (136s): VIDEO: [DIV3] 480x260 24bpp 24.00 fps 761.0 kbps (92.9 kbyte/s) divx: BENCHMARKs: V: 52.153s VO: 11.234s A: 0.000s Sys: 21.611s = 84.998s divxds: BENCHMARKs: V: 53.720s VO: 11.518s A: 0.000s Sys: 21.426s = 86.664s ffdivx (first): BENCHMARKs: V: 75.025s VO: 11.877s A: 0.000s Sys: 22.034s = 108.936s ffdivx (2001-07-11): BENCHMARKs: V: 69.263s VO: 11.751s A: 0.000s Sys: 21.967s = 102.980s ffdivx (2001-07-12): BENCHMARKs: V: 60.255s VO: 11.892s A: 0.000s Sys: 21.754s = 93.901s ffdivx (2001-07-16): BENCHMARKs: V: 58.367s VO: 11.770s A: 0.000s Sys: 22.604s = 92.742s Wing Commander trailer (68s): VIDEO: [DIV3] 640x360 24bpp 24.00 fps 846.9 kbps (103.4 kbyte/s) divx: BENCHMARKs: V: 43.194s VO: 10.328s A: 0.000s Sys: 19.771s = 73.293s divxds: BENCHMARKs: V: 44.376s VO: 10.278s A: 0.000s Sys: 19.721s = 74.375s ffdivx (first): BENCHMARKs: V: 62.605s VO: 8.188s A: 0.000s Sys: 19.616s = 90.410s ffdivx (2001-07-11): BENCHMARKs: V: 58.277s VO: 8.039s A: 0.000s Sys: 19.694s = 86.010s ffdivx (2001-07-12): BENCHMARKs: V: 49.239s VO: 8.279s A: 0.000s Sys: 19.710s = 77.228s ffdivx (2001-07-16): BENCHMARKs: V: 47.548s VO: 8.227s A: 0.000s Sys: 20.257s = 76.033s Dune trailer (60s): VIDEO: [DIV3] 624x356 24bpp 24.00 fps 1154.6 kbps (140.9 kbyte/s) divx: BENCHMARKs: V: 37.185s VO: 10.107s A: 0.000s Sys: 19.457s = 66.748s divxds: BENCHMARKs: V: 38.875s VO: 10.095s A: 0.000s Sys: 19.200s = 68.170s ffdivx (first): BENCHMARKs: V: 62.498s VO: 10.769s A: 0.000s Sys: 19.103s = 92.370s ffdivx (2001-07-11): BENCHMARKs: V: 59.567s VO: 10.737s A: 0.000s Sys: 19.008s = 89.311s ffdivx (2001-07-12): BENCHMARKs: V: 49.407s VO: 10.802s A: 0.000s Sys: 19.342s = 79.552s ffdivx (2001-07-16): BENCHMARKs: V: 47.516s VO: 10.784s A: 0.000s Sys: 19.464s = 77.764s Gladiator trailer (85s): VIDEO: [DIV3] 480x272 24bpp 24.00 fps 986.1 kbps (120.4 kbyte/s) divx: BENCHMARKs: V: 38.600s VO: 9.057s A: 0.000s Sys: 16.588s = 64.245s divxds: BENCHMARKs: V: 39.979s VO: 9.080s A: 0.000s Sys: 16.298s = 65.357s ffdivx (first): BENCHMARKs: V: 58.397s VO: 8.855s A: 0.000s Sys: 16.803s = 84.054s ffdivx (2001-07-11): BENCHMARKs: V: 54.742s VO: 8.676s A: 0.000s Sys: 16.587s = 80.005s ffdivx (2001-07-12): BENCHMARKs: V: 46.858s VO: 9.066s A: 0.000s Sys: 16.389s = 72.312s ffdivx (2001-07-16): BENCHMARKs: V: 45.024s VO: 8.813s A: 0.000s Sys: 17.095s = 70.932s Ronin trailer (122s): VIDEO: [DIV3] 640x304 24bpp 25.00 fps 820.6 kbps (100.2 kbyte/s) divx: BENCHMARKs: V: 75.235s VO: 20.104s A: 0.000s Sys: 35.425s = 130.764s divxds: BENCHMARKs: V: 76.516s VO: 19.906s A: 0.000s Sys: 35.486s = 131.907s ffdivx (first): BENCHMARKs: V: 116.941s VO: 14.743s A: 0.000s Sys: 36.564s = 168.248s ffdivx (2001-07-11): BENCHMARKs: V: 108.452s VO: 14.651s A: 0.000s Sys: 36.061s = 159.164s ffdivx (2001-07-12): BENCHMARKs: V: 93.509s VO: 14.644s A: 0.000s Sys: 36.192s = 144.344s ffdivx (2001-07-16): BENCHMARKs: V: 90.271s VO: 14.666s A: 0.000s Sys: 36.401s = 141.337s Hannibal trailer (139s): VIDEO: [DIV3] 480x260 24bpp 24.00 fps 185.7 kbps (22.7 kbyte/s) divx: BENCHMARKs: V: 35.121s VO: 13.411s A: 0.000s Sys: 24.938s = 73.470s divxds: BENCHMARKs: V: 36.113s VO: 13.567s A: 0.000s Sys: 24.449s = 74.129s ffdivx (first): BENCHMARKs: V: 70.192s VO: 13.309s A: 0.000s Sys: 24.315s = 107.816s ffdivx (2001-07-11): BENCHMARKs: V: 66.790s VO: 13.295s A: 0.000s Sys: 24.121s = 104.205s ffdivx (2001-07-12): BENCHMARKs: V: 47.430s VO: 13.350s A: 0.000s Sys: 23.983s = 84.763s ffdivx (2001-07-16): BENCHMARKs: V: 44.439s VO: 13.434s A: 0.000s Sys: 24.167s = 82.041s Star Wars 1 trailer (147s): VIDEO: [DIV3] 640x288 24bpp 24.00 fps 995.3 kbps (121.5 kbyte/s) divx: BENCHMARKs: V: 82.215s VO: 22.012s A: 0.000s Sys: 38.531s = 142.759s divxds: BENCHMARKs: V: 84.066s VO: 21.884s A: 0.000s Sys: 38.604s = 144.553s ffdivx (2001-07-12): BENCHMARKs: V: 102.480s VO: 15.861s A: 0.000s Sys: 39.604s = 157.945s ffdivx (2001-07-16): BENCHMARKs: V: 97.965s VO: 15.720s A: 0.000s Sys: 39.653s = 153.338s Best Regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From paranoia at antionline.org Mon Jul 16 19:22:10 2001 From: paranoia at antionline.org (Satan dastou) Date: Mon, 16 Jul 2001 10:22:10 -0700 Subject: [Mplayer-users] ./configure on OpenBSD (MMX) Message-ID: <200107161722.KAA26641@mail15.bigmailbox.com> An embedded and charset-unspecified text was scrubbed... Name: not available URL: From tibcu at sch.bme.hu Mon Jul 16 19:19:33 2001 From: tibcu at sch.bme.hu (Balazs Tibor) Date: Mon, 16 Jul 2001 19:19:33 +0200 (MEST) Subject: [Mplayer-users] ff-divx benchmarks... In-Reply-To: <20010716184108.A1210@hoth.amu.edu.pl> Message-ID: > FreeBSD 4.3 Debian potato > AMD K6-2 333MHz + C&T CT65554 + Xv P1 200MHz with MMX ET6000 with 2.25 Mb, no Xv :( > gcc version 2.95.3 [FreeBSD] 20010315 (release) 2.95.2 > XFree86 Version 4.1.0 / X Window System (800x600x24bpp) 3.3.6 > MMX + 3DNow MMX > -nosound -benchmark [-dshow] [-vc ffdivx] VIDEO: [DIV3] 384x288 24bpp 29.97 fps 966.1 kbps (117.9 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:384x288 fps:29.97 ftime:=0.0334 -frames 500 -benchmark -osdlevel 0 -nosound -bpp 32 -vfm 5 -v -vo svga -bpp 32 Detected video codec: [ffdivx] drv:5 (FFmpeg DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 16.449s VO: 9.546s A: 0.000s Sys: 5.374s = 31.368s Detected video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 14.782s VO: 5.969s A: 0.000s Sys: 5.430s = 26.181s Detected video codec: [divx] drv:2 (DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 14.680s VO: 5.983s A: 0.000s Sys: 5.391s = 26.054s -bpp 24 Detected video codec: [ffdivx] drv:5 (FFmpeg DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 16.345s VO: 13.614s A: 0.000s Sys: 4.132s = 34.091s Detected video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 13.839s VO: 4.487s A: 0.000s Sys: 4.136s = 22.461s Detected video codec: [divx] drv:2 (DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 13.588s VO: 4.359s A: 0.000s Sys: 4.066s = 22.013s -bpp 16 Detected video codec: [ffdivx] drv:5 (FFmpeg DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 16.212s VO: 6.751s A: 0.000s Sys: 2.819s = 25.783s Detected video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 13.711s VO: 2.746s A: 0.000s Sys: 2.790s = 19.247s Detected video codec: [divx] drv:2 (DivX ;-) (MS MPEG-4 v3)) not working -bpp 15 Detected video codec: [ffdivx] drv:5 (FFmpeg DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 16.296s VO: 7.760s A: 0.000s Sys: 2.805s = 26.861s Detected video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 13.558s VO: 2.917s A: 0.000s Sys: 2.882s = 19.358s Detected video codec: [divx] drv:2 (DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 13.292s VO: 2.951s A: 0.000s Sys: 2.772s = 19.015s -vo null Detected video codec: [ffdivx] drv:5 (FFmpeg DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 15.732s VO: 0.005s A: 0.000s Sys: 0.217s = 15.954s Detected video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 11.949s VO: 0.006s A: 0.000s Sys: 0.222s = 12.177s Detected video codec: [divx] drv:2 (DivX ;-) (MS MPEG-4 v3)) BENCHMARKs: V: 11.872s VO: 0.005s A: 0.000s Sys: 0.213s = 12.090s Bye Tibcu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Mon Jul 16 19:31:27 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Mon, 16 Jul 2001 19:31:27 +0200 Subject: [Mplayer-users] Networking with mplayer References: <200107161503.RAA34250@thot.banki.hu> Message-ID: <002e01c10e1d$24d84c00$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* > > I'm using mplayer very often in LAN to watch videos from another machines. > > If the file is on my machine, it goes OK, if it' is in the network, it > > stopps for a half a sec, and not goes smoothly. I tried to use some cache > > but it doesn't help. Are you planning to write some buffer-tech for this > > reason? My card is only 10MBit/s but 1.2 Mbyte should be alright for even > > divx, not only for mpeg or anything like that. But sometime it slows down, > > so a cache would probably help. > It's planned, read TODO or this maillist... > > currently as a workaround, you can use TOOLS/cache.c > not too perfect, but it worked for me playing divx from NFS-mounted disks, > over 10MBit net. I've the same problem with my 100mbit network and using SMB-Filesystem (Samba). But under windows i don't have such a problem. i looked at parse_es.c and edited #define VIDEOBUFFER_SIZE 0x100000 to #define VIDEOBUFFER_SIZE 0x1000000, then it was played normaly, but only mpeg(2) files, not divxes... mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 16 19:38:57 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 16 Jul 2001 19:38:57 +0200 (CEST) Subject: [Mplayer-users] Networking with mplayer In-Reply-To: <002e01c10e1d$24d84c00$6400a8c0@p3> Message-ID: <200107161738.TAA43778@thot.banki.hu> Hi, > I've the same problem with my 100mbit network and using SMB-Filesystem > (Samba). But under windows i don't have such a problem. > i looked at parse_es.c and edited #define VIDEOBUFFER_SIZE 0x100000 to > #define VIDEOBUFFER_SIZE 0x1000000, then it was played normaly, but only > mpeg(2) files, not divxes... :))))))))))))))))))) impossible. this variable is the size of temporary memory buffer for a single mpeg-ES video frame. nothing to do with input buffering... as a normal mpeg1/2 video frame is not bigger than 1MB (it means 25-30 megabytes/second!) changing this limit to 16MB won't help :) if it was fast after modifying it, it was because the file was already in the linux kernel cache. try to play with old (0x100000) version, it will be fast at second time. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Mon Jul 16 21:09:35 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Mon, 16 Jul 2001 21:09:35 +0200 Subject: [Mplayer-users] ./configure on OpenBSD (MMX) In-Reply-To: <200107161722.KAA26641@mail15.bigmailbox.com> References: <200107161722.KAA26641@mail15.bigmailbox.com> Message-ID: <8241841795.20010716210935@gmx.de> Hello Satan, Monday, July 16, 2001, 7:22:10 PM, you wrote: > Hi , > I did the change you proposed ...it worked....but now it complain about libpthread > I have those library in /usr/local/emul/redhat/lib I propose to add it do the EXTRA_LIB (or something similar) in the config.h after running configure and then compile. > how do i specify it so the configure script will look there for those libary? > Thank You [snip] > "My brain thinks bomb like..." -Tricky -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 16 22:32:06 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 16 Jul 2001 22:32:06 +0200 (CEST) Subject: [Mplayer-users] Elementary streams (ES) In-Reply-To: <005701c10b0c$91d87640$6400a8c0@p3> Message-ID: <200107162032.WAA30730@thot.banki.hu> Hi, > > > i could send you such a file for testing if you want. > > upload it to ftp://mplayer.dev.hu/MPlayer/incoming > > > > i've found something, the correct name seams to be "multiplexed PES" ... but > i will upload a sample an some programm(source), I hope the help you ... > > i will upload today or tomorrow (I'm very busy at the moment ;-( ... > also no time in the work, i must install Mplayer on the Server of my > teammate ;-) Done. It was normal PES stream, but with no header, so mplayer didn't recognize it. Now i added headerless PES stream detection, try again with the CVS version. PES streams normally have 1BA/1BB header packet twice per second. This sample stream doesn't have it at all. Only 1C0 and 1E0 packets. It's strange, because PES header packet contains info about streaming, for example bandwith and required buffer size... btw mplayer can play it without header packets, as they aren't really used in it. (buffersize is hard-coded, and bandwith not required for sw. playback) Btw this sample has very very good image quality. Are all DVB stuff such good? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Mon Jul 16 22:43:32 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Mon, 16 Jul 2001 22:43:32 +0200 Subject: [Mplayer-users] Elementary streams (ES) References: <200107162032.WAA30730@thot.banki.hu> Message-ID: <000701c10e37$fa8b5530$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* > Done. It was normal PES stream, but with no header, so mplayer didn't > recognize it. Now i added headerless PES stream detection, try again with > the CVS version. thx a lot ... i will test it tomorrow very fast work ... well done ... ;-) > Btw this sample has very very good image quality. > Are all DVB stuff such good? yes ... that's the reason why i've buyed such a expensive card ... i would say it's near DVD ... do you now maybe understand, why we want to use the tv-out of this card ??? ;-) mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 16 23:38:11 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 16 Jul 2001 23:38:11 +0200 (CEST) Subject: [Mplayer-users] Elementary streams (ES) In-Reply-To: <000701c10e37$fa8b5530$6400a8c0@p3> Message-ID: <200107162138.XAA27890@thot.banki.hu> Hi, > > Btw this sample has very very good image quality. > > Are all DVB stuff such good? > > yes ... that's the reason why i've buyed such a expensive card ... i would > say it's near DVD ... cool. > do you now maybe understand, why we want to use the tv-out of this card ??? > ;-) how expensive is it? i've found info only on a russian site, but no prices at all... or you still can get one for me, for driver development? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 17 03:03:13 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 17 Jul 2001 03:03:13 +0200 (CEST) Subject: [Mplayer-users] transport streams Message-ID: <200107170103.DAA46474@thot.banki.hu> Hi, My first hack is here: ftp://mp.dev.hu/MPlayer/incoming/transport-stream/ts2ps.c it lists streams of an MPEG-TS file, and if you select one, and change DUMP_ID in the source, you get it dumped to stdout. (TS stream must be sent to stdin) i'll integrate it into mplayer soon. (needs some design changes of my mpeg demuxer layers) btw, it's very interesting that DVB dumps has everything multiple times in it. i mean same second of movie is stored 4 times... maybe some kind of error protection, but weird. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From j.pepas at mail.utexas.edu Tue Jul 17 09:28:10 2001 From: j.pepas at mail.utexas.edu (jason pepas) Date: Tue, 17 Jul 2001 02:28:10 -0500 Subject: [Mplayer-users] vo_png.c problems? Message-ID: <20010717022810.6204d162.j.pepas@mail.utexas.edu> hey guys, I recently found out about mplayer and have been very eager to try it. I downloaded the source (Mplayer-0.17a-idegcounter) and ran debuild on it. make spits out a ton of errors from vo_png.c (i can capture them if you like) am I perhaps missing a package which make depends on? any ideas would be appreciated. thanks, jason jason at pepas.com ps - i am not subscribed to the list, so if you could cc any replies to me that would be great! _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Tue Jul 17 09:28:42 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Tue, 17 Jul 2001 09:28:42 +0200 Subject: [Mplayer-users] transport streams References: <200107170103.DAA46474@thot.banki.hu> Message-ID: <003501c10e92$21cc0f40$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* > btw, it's very interesting that DVB dumps has everything > multiple times in it. i mean same second of movie is stored > 4 times... maybe some kind of error protection, but weird. i' can believe that. The Data-Stream you receive via SAT ist not 100% correct, so this will me, to get it correct. you must only look at a analog-Sat-reciever. e.g. if it's raining, you see a lot of errors, at digital not ... mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Tue Jul 17 09:47:55 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Tue, 17 Jul 2001 09:47:55 +0200 (CEST) Subject: [Mplayer-users] vo_png.c problems? In-Reply-To: <20010717022810.6204d162.j.pepas@mail.utexas.edu> Message-ID: > I downloaded the source (Mplayer-0.17a-idegcounter) you should try newer, preferably current cvs > and ran debuild on it. read DOCS/DEBIAN for debian. > make spits out a ton of errors from vo_png.c (i can capture them if you > like) you're probably missing libpng2-dev package. could you be more verbose in describing your problem? -- Dariusz Pietrzak Excuse me, I'm cixelsyd today _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Tue Jul 17 09:49:46 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Tue, 17 Jul 2001 09:49:46 +0200 Subject: [Mplayer-users] Elementary streams (ES) References: <200107162138.XAA27890@thot.banki.hu> Message-ID: <000a01c10e95$0ed2b350$6400a8c0@p3> > how expensive is it? i've found info only on a russian site, but no > prices at all... > > or you still can get one for me, for driver development? well ... the most popular of this cards (in austria) is the Hauppauge (German Manufactor), it costs about 3500 ATS this are about 64.400,90 Hungarian "Forint" .. i believe ... with this card you can watch digital SAT ... but if you want to watch pay-tv .. it will get more expensive ;-) well, i must ask if I now could get such a card ... but weeks ago the told me only to lend me one ... are you now interested in it ? mfg Johannes -------------- next part -------------- An HTML attachment was scrubbed... URL: From jesse_hepburn at yahoo.com Tue Jul 17 10:50:46 2001 From: jesse_hepburn at yahoo.com (Jesse Hepburn) Date: Tue, 17 Jul 2001 10:50:46 +0200 Subject: [Mplayer-users] DVD playback Message-ID: <00c001c10e9d$91f32550$43aedf8a@HCRP1692> I'm sure this question has been asked a million times, but I couldn't find an answer in the archives. When I try to play an encrypted dvd I get an error (I can't recall the exact error because I'm at work now.) Basically it tells me to run as root, but I am running as root. Unencrypted dvds work just fine. I'm using libcss 0.1.0-1 btw. -------------- next part -------------- An HTML attachment was scrubbed... URL: From atmosfear at users.sourceforge.net Tue Jul 17 11:09:36 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Tue, 17 Jul 2001 11:09:36 +0200 Subject: [Mplayer-users] Elementary streams (ES) In-Reply-To: <000a01c10e95$0ed2b350$6400a8c0@p3> References: <200107162138.XAA27890@thot.banki.hu> <000a01c10e95$0ed2b350$6400a8c0@p3> Message-ID: <3692243549.20010717110936@gmx.de> Hello Johannes, Tuesday, July 17, 2001, 9:49:46 AM, you wrote: >> how expensive is it? i've found info only on a russian site, but no >> prices at all... >> >> or you still can get one for me, for driver development? > well ... the most popular of this cards (in austria) is the Hauppauge > (German Manufactor), it costs about 3500 ATS this are about 64.400,90 > Hungarian "Forint" .. i believe ... > with this card you can watch digital SAT ... but if you want to watch > pay-tv .. it will get more expensive ;-) Siemens DVB card costs 500DM + 150DM if you want the Pay-TV extension, so that's 650DM = 83,854.93HUF. > well, i must ask if I now could get such a card ... but weeks ago the > told me only to lend me one ... > are you now interested in it ? of course he is, else he wouldn't ask, and Arpi know stuff but driver development... > mfg Johannes -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Tue Jul 17 11:00:52 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Tue, 17 Jul 2001 11:00:52 +0200 Subject: [Mplayer-users] vo_png.c problems? In-Reply-To: <20010717022810.6204d162.j.pepas@mail.utexas.edu> References: <20010717022810.6204d162.j.pepas@mail.utexas.edu> Message-ID: <13691719345.20010717110052@gmx.de> Hello jason, Tuesday, July 17, 2001, 9:28:10 AM, you wrote: > hey guys, > I recently found out about mplayer and have been very eager to try it. > I downloaded the source (Mplayer-0.17a-idegcounter) > and ran debuild on it. > make spits out a ton of errors from vo_png.c (i can capture them if you > like) you need libpng and dev-package and on some systems also zlib and mathlib is needed (I should add -lm to configure -lz is already added), but I'm not sure -lz stuff is in idegcounter try mplayer 0.18pre5 is loads betetr anyway. > am I perhaps missing a package which make depends on? > any ideas would be appreciated. > thanks, > jason > jason at pepas.com > ps - i am not subscribed to the list, so if you could cc any replies to me > that would be great! -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 17 11:27:22 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 17 Jul 2001 11:27:22 +0200 (CEST) Subject: [Mplayer-users] Elementary streams (ES) In-Reply-To: <3692243549.20010717110936@gmx.de> Message-ID: <200107170927.LAA19568@thot.banki.hu> Hi, > >> how expensive is it? i've found info only on a russian site, but no > >> prices at all... > >> > >> or you still can get one for me, for driver development? > > > well ... the most popular of this cards (in austria) is the Hauppauge > > (German Manufactor), it costs about 3500 ATS this are about 64.400,90 > > Hungarian "Forint" .. i believe ... > > > with this card you can watch digital SAT ... but if you want to watch > > pay-tv .. it will get more expensive ;-) > Siemens DVB card costs 500DM + 150DM if you want the Pay-TV extension, > so that's 650DM = 83,854.93HUF. > hmm. it is not so expensive. btw i also need the satellite receiver equipment too. i have a very old 80cm "antenna", using it for receiving analog radios from Astra. i dunno if it's enough for digital data. and which card (hauppage or siemens) is preferred? i mean available open register-level docs, linux drivers for capture/send streams, control tuner etc. > > well, i must ask if I now could get such a card ... but weeks ago the > > told me only to lend me one ... > > > are you now interested in it ? > of course he is, else he wouldn't ask, and Arpi know stuff but driver > development... yes i wanna try it, and if it seems to be usable under linux (i can develop tools and mplayer support for it) i'll buy one. i like this DVB image quality :) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lgb at lgb.hu Tue Jul 17 11:42:37 2001 From: lgb at lgb.hu (=?iso-8859-2?B?R+Fib3IgTOlu4XJ0?=) Date: Tue, 17 Jul 2001 11:42:37 +0200 Subject: [Mplayer-users] DVD playback In-Reply-To: <00c001c10e9d$91f32550$43aedf8a@HCRP1692> Message-ID: <20010717114237.A6334@vega.digitel2002.hu> On Tue, Jul 17, 2001 at 10:50:46AM +0200, Jesse Hepburn wrote: > I'm sure this question has been asked a million times, but I couldn't > find an answer in the archives. > > When I try to play an encrypted dvd I get an error (I can't recall the > exact error because I'm at work now.) > Basically it tells me to run as root, but I am running as root. > Unencrypted dvds work just fine. > I'm using libcss 0.1.0-1 btw. Hmmm. Please report this with full output of mplayer, and possibly kernel logs. We can't do anything with such a bug report, sorry ... -- --[ G?bor L?n?rt ]---[ Vivendi Telecom Hungary ]---------[ lgb at lgb.hu ]-- U have 8 bit comp or chip of them and it's unused or to be sold? Call me! -------[ +36 30 2270823 ]------> LGB <-----[ Linux/UNIX/8bit 4ever ]----- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Tue Jul 17 11:52:46 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Tue, 17 Jul 2001 12:52:46 +0300 (EEST) Subject: [Mplayer-users] cyrillic fonts? Message-ID: hello there all over the two available sites (mplayer.sourceforge.net and mplayer.dev.hu) there are references to cyrillic osd fonts (bgfont.zip). the links however are broken on both sites (they point to different places). i could not find any mention about that condition in the documentation (cyrillic is listed as available everywhere). can somebody tell me where to find the fonts or why have they been removed? _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Tue Jul 17 15:55:22 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Tue, 17 Jul 2001 13:55:22 +0000 (:) Subject: [Mplayer-users] ff-divx benchmarks... In-Reply-To: <200107161144.NAA13994@thot.banki.hu> Message-ID: Hi, Arpi! On 2001-07-16 13:44:26 you wrote: >Hi, > >I'm back from holiday, and my first thing to do was testing ffmpeg speed >again :) My congratulations! >Nick did a good job: > This job is not perfect :( >---------------------------- > >Star_Wars_Episode_1.avi >VIDEO: [DIV3] 720x576 24bpp 25.00 fps 2018.4 kbps (246.4 kbyte/s) [snipped out] >I used -nosound, and -vo mga for these tests. >Video decoding is still slow for low res - high bitrate case, but it's >the same or faster than dshow/vfw for normal bitrate divx files! >VO speed is much better for ffmpeg, because of using YV12 (12bpp) instead >of YUY2 (16bpp). > I've done still one bit of optimization ;) But I'm disillusioned. MMX optimized code get too little speedup for dsputils which is comparable with precision of mplayer's measurements. It caused by misaligned memory access from MMX part and using too random data which have size of mmx register. (The last caused cpu stalls for loading data from memory into cpu caches). I'm spend a lot of my time for studying the sources. I've found that there can be optimized dct_unquantize from mpegvideo.c and j_rev_dct from jrevdct.c to speedup decoder. But I have some doubts: 1. These functions are core of decoder (imho) and such optimization makes impossible to improve some DivX lacks. (Indeed I've watched such lacks on each movies with divxc32 and with ffmpeg decoders) I'm not sure, and maybe it's lacks of encoders but I still have hopes. 2. Since MMX set is not adapted for multiplication of 32-bit values applying of MMX optimization can only slowdown decoding (or maybe who knows some tricks?) In this connextion it would be better to use 3dnow-SSE optimized code for those function, imho. But in this case P1MMX users will love win32 codecs ;) Maybe Gerard Lantau will perform some modification of the sources to make ffmpeg stuff more friendly for MMX? (Please look at sources of mpeg2 decoders from libmpeg2 and libavcodec to understand what I mean). Best regards! Nick (2001-07-17 13:35:20) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Tue Jul 17 12:15:11 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Tue, 17 Jul 2001 12:15:11 +0200 (MET DST) Subject: [Mplayer-users] DVD playback (article in c't) Message-ID: <200107171015.f6HAFBB11692@pheidippides.md.chalmers.se> Hej, in the (only) german computer magazin c't there is an article about DVD players for Linux, including MPlayer. It's quite positive, although containing the expected phrases: "No GUI, console only" and "needs libcss for DVD play". However they stress that Mplayer uses less CPU power (with XVideo) than most other players. :-) gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 17 12:14:59 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 17 Jul 2001 12:14:59 +0200 (CEST) Subject: [Mplayer-users] cyrillic fonts? In-Reply-To: Message-ID: <200107171014.MAA10832@thot.banki.hu> Hi, > hello there > > all over the two available sites (mplayer.sourceforge.net and mplayer.dev.hu) > there are references to cyrillic osd fonts (bgfont.zip). the links however > are broken on both sites (they point to different places). i could not find > any mention about that condition in the documentation (cyrillic is listed as > available everywhere). can somebody tell me where to find the fonts or why > have they been removed? > > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From hh at holtschneider.com Tue Jul 17 12:23:11 2001 From: hh at holtschneider.com (Henning Holtschneider) Date: Tue, 17 Jul 2001 12:23:11 +0200 Subject: [Mplayer-users] Elementary streams (ES) References: <200107170927.LAA19568@thot.banki.hu> Message-ID: <011b01c10eaa$7b0e52d0$22e81cd4@kruemelmonster> Hi, I just subscribed to this list because I'm looking for a way to play DivX-encoded files on my DVB card (i.e. convert DivX stream to [I-frame only] MPEG2 - preferably in realtime - and send it to the DVB card) so please forgive me if I missed anything discussed here before ;-) > hmm. it is not so expensive. > btw i also need the satellite receiver equipment too. i have a very old > 80cm "antenna", using it for receiving analog radios from Astra. > i dunno if it's enough for digital data. 80 cm should be enough (you live in Hungary, right?). You just need an LNB that can handle the digital frequency ranges. > and which card (hauppage or siemens) is preferred? It doesn't really matter because the cards are the same. However, there are currently two board revision, the older one with LNB loop-through and the newer one without loop-through. There are some minor tuning problems with the new revision so you might want to try to get the old revision (I think http://www.dvb-shop.de has them on stock). > i mean available open register-level docs, linux drivers for capture/send > streams, control tuner etc. Just have a look at http://www.linuxtv.org, drivers are available there. Someone also put a web page together with all documents but I don't think you need that because a driver is available already. > i wanna try it, and if it seems to be usable under linux (i can develop > tools and mplayer support for it) i'll buy one. > i like this DVB image quality :) The image quality is very good and since the card has its own TV-out, you won't lose any quality on the way to your TV screen ;-) Regards, hh _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Tue Jul 17 12:24:17 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Tue, 17 Jul 2001 12:24:17 +0200 Subject: [Mplayer-users] DVD playback (article in c't) References: <200107171015.f6HAFBB11692@pheidippides.md.chalmers.se> Message-ID: <003301c10eaa$a8d0a600$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* in whitch c't is that ? 14/2001 ??? c't rulezzz mfg Johannes ----- Original Message ----- From: "Christoph Lampert" To: Sent: Tuesday, July 17, 2001 12:15 PM Subject: [Mplayer-users] DVD playback (article in c't) > *This message was transferred with a trial version of CommuniGate(tm) Pro* > Hej, > > in the (only) german computer magazin c't there is an article about > DVD players for Linux, including MPlayer. It's quite positive, although > containing the expected phrases: "No GUI, console only" and "needs libcss > for DVD play". However they stress that Mplayer uses less CPU power (with > XVideo) than most other players. :-) > > gruel > > -- > Dipl. math. Christoph Lampert (complex analysis, integral formulae) > Email: gruel at gmx.de | Email: lampert at math.chalmers.se > > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Tue Jul 17 12:32:11 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Tue, 17 Jul 2001 12:32:11 +0200 Subject: [Mplayer-users] Elementary streams (ES) References: <200107170927.LAA19568@thot.banki.hu> <011b01c10eaa$7b0e52d0$22e81cd4@kruemelmonster> Message-ID: <004101c10eab$c3718dc0$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* > I just subscribed to this list because I'm looking for a way to play > DivX-encoded files on my DVB card (i.e. convert DivX stream to [I-frame > only] MPEG2 - preferably in realtime - and send it to the DVB card) so > please forgive me if I missed anything discussed here before ;-) well, i think i don't need to answere ;-) but i have a question to you, henning ... do you have already a programm for watching divx via DVB-s on TV ??? mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 17 12:42:38 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 17 Jul 2001 12:42:38 +0200 (CEST) Subject: [Mplayer-users] Elementary streams (ES) In-Reply-To: <011b01c10eaa$7b0e52d0$22e81cd4@kruemelmonster> Message-ID: <200107171042.MAA14752@thot.banki.hu> Hi, > I just subscribed to this list because I'm looking for a way to play > DivX-encoded files on my DVB card (i.e. convert DivX stream to [I-frame > only] MPEG2 - preferably in realtime - and send it to the DVB card) so > please forgive me if I missed anything discussed here before ;-) Using I frames only will be slooow. But you can use I and P frames, with motion compensation. MC vectors from divx file... so transcoding can be fast, and use low bandwith to the card. ffmpeg does similar thing for divx->mpeg1 transcoding, with the -sameq option. btw it's very alpha thing yet, and doesn't use MC vectors from divx yet. and also TS streams should be created from VBR PES packets. > > hmm. it is not so expensive. > > btw i also need the satellite receiver equipment too. i have a very old > > 80cm "antenna", using it for receiving analog radios from Astra. > > i dunno if it's enough for digital data. > > 80 cm should be enough (you live in Hungary, right?). You just need an LNB yes, i'm living at Budapest. > that can handle the digital frequency ranges. what frequecy range are they using? > The image quality is very good and since the card has its own TV-out, you > won't lose any quality on the way to your TV screen ;-) What is on the card? mpeg2 decoder and sat receiver chips? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Tue Jul 17 13:27:42 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Tue, 17 Jul 2001 13:27:42 +0200 Subject: [Mplayer-users] ff-divx benchmarks... In-Reply-To: References: <200107161144.NAA13994@thot.banki.hu> Message-ID: <20010717132742.A11321@hoth.amu.edu.pl> On Tue, Jul 17, 2001 at 01:55:22PM +0000, Nick Kurshev wrote: > Hi, Arpi! > > On 2001-07-16 13:44:26 you wrote: > > >Hi, > > > >I'm back from holiday, and my first thing to do was testing ffmpeg speed > >again :) > My congratulations! > > >Nick did a good job: > > > This job is not perfect :( Good work :) actual results: FreeBSD 4.3 AMD K6-2 333MHz + C&T CT65554 + Xv gcc version 2.95.3 [FreeBSD] 20010315 (release) XFree86 Version 4.1.0 / X Window System (800x600x24bpp) MMX + 3DNow -nosound -benchmark -osdlevel 2 [-dshow] [-vc ffdivx] (old historical results are slighty inaccurate): 2001-07-06: first ffdivx 0.4.3 2001-07-10: fastmem (Nick) 2001-07-11: dsputil_mmx (Nick) 2001-07-12: dsputil 32bit (Jurgen) 2001-07-16: dsputil_mmx (Nick) 2001-07-17: dsputil 3DNow+mmx2 (Nick) Space Cowboys trailer (145s): [DIV3] 480x200 24bpp 24.00 fps 154.3 kbps divx: V: 26.829s VO: 10.416s A: 0.000s Sys: 20.861s = 58.106s divxds: V: 27.530s VO: 10.546s A: 0.000s Sys: 20.876s = 58.952s ffdivx-010706: V: 49.861s VO: 9.257s A: 0.000s Sys: 17.305s = 76.423s ffdivx-010710: V: 49.591s VO: 9.048s A: 0.000s Sys: 17.170s = 75.809s ffdivx-010711: V: 47.585s VO: 8.976s A: 0.000s Sys: 17.060s = 73.622s ffdivx-010712: V: 35.031s VO: 9.155s A: 0.000s Sys: 17.309s = 61.495s ffdivx-010716: V: 33.062s VO: 9.100s A: 0.000s Sys: 17.719s = 59.882s ffdivx-010717: V: 28.205s VO: 8.992s A: 0.000s Sys: 17.980s = 55.177s MI2 trailer (121s): [DIV3] 480x204 24bpp 24.00 fps 700.6 kbps divx: V: 42.600s VO: 8.959s A: 0.000s Sys: 18.045s = 69.604s divxds: V: 43.920s VO: 9.246s A: 0.000s Sys: 17.625s = 70.790s ffdivx-010706: V: 63.671s VO: 9.333s A: 0.000s Sys: 18.321s = 91.325s ffdivx-010711: V: 59.441s VO: 9.137s A: 0.000s Sys: 18.229s = 86.808s ffdivx-010712: V: 52.497s VO: 9.582s A: 0.000s Sys: 18.179s = 80.258s ffdivx-010716: V: 51.008s VO: 9.193s A: 0.000s Sys: 18.575s = 78.776s ffdivx-010717: V: 43.575s VO: 9.238s A: 0.000s Sys: 18.720s = 71.533s Tomb Raider trailer (136s): [DIV3] 480x260 24bpp 24.00 fps 761.0 kbps divx: V: 51.643s VO: 11.311s A: 0.000s Sys: 21.896s = 84.850s divxds: V: 53.720s VO: 11.518s A: 0.000s Sys: 21.426s = 86.664s ffdivx-010706: V: 75.025s VO: 11.877s A: 0.000s Sys: 22.034s = 108.936s ffdivx-010711: V: 69.263s VO: 11.751s A: 0.000s Sys: 21.967s = 102.980s ffdivx-010712: V: 60.255s VO: 11.892s A: 0.000s Sys: 21.754s = 93.901s ffdivx-010716: V: 58.367s VO: 11.770s A: 0.000s Sys: 22.604s = 92.742s ffdivx-010717: V: 51.029s VO: 11.680s A: 0.000s Sys: 22.396s = 85.105s Wing Commander trailer (68s): [DIV3] 640x360 24bpp 24.00 fps 846.9 kbps divx: V: 43.156s VO: 10.259s A: 0.000s Sys: 19.684s = 73.100s divxds: V: 44.376s VO: 10.278s A: 0.000s Sys: 19.721s = 74.375s ffdivx-010706: V: 62.605s VO: 8.188s A: 0.000s Sys: 19.616s = 90.410s ffdivx-010711: V: 58.277s VO: 8.039s A: 0.000s Sys: 19.694s = 86.010s ffdivx-010712: V: 49.239s VO: 8.279s A: 0.000s Sys: 19.710s = 77.228s ffdivx-010716: V: 47.548s VO: 8.227s A: 0.000s Sys: 20.257s = 76.033s ffdivx-010717: V: 41.085s VO: 8.181s A: 0.000s Sys: 20.077s = 69.343s Dune trailer (60s): [DIV3] 624x356 24bpp 24.00 fps 1154.6 kbps divx: V: 37.185s VO: 10.107s A: 0.000s Sys: 19.457s = 66.748s divxds: V: 38.875s VO: 10.095s A: 0.000s Sys: 19.200s = 68.170s ffdivx-010706: V: 62.498s VO: 10.769s A: 0.000s Sys: 19.103s = 92.370s ffdivx-010711: V: 59.567s VO: 10.737s A: 0.000s Sys: 19.008s = 89.311s ffdivx-010712: V: 49.407s VO: 10.802s A: 0.000s Sys: 19.342s = 79.552s ffdivx-010716: V: 47.516s VO: 10.784s A: 0.000s Sys: 19.464s = 77.764s ffdivx-010717: V: 42.813s VO: 10.860s A: 0.000s Sys: 19.748s = 73.421s Gladiator trailer (85s): [DIV3] 480x272 24bpp 24.00 fps 986.1 kbps divx: V: 38.600s VO: 9.057s A: 0.000s Sys: 16.588s = 64.245s divxds: V: 39.979s VO: 9.080s A: 0.000s Sys: 16.298s = 65.357s ffdivx-010706: V: 58.397s VO: 8.855s A: 0.000s Sys: 16.803s = 84.054s ffdivx-010711: V: 54.742s VO: 8.676s A: 0.000s Sys: 16.587s = 80.005s ffdivx-010712: V: 46.858s VO: 9.066s A: 0.000s Sys: 16.389s = 72.312s ffdivx-010716: V: 45.024s VO: 8.813s A: 0.000s Sys: 17.095s = 70.932s ffdivx-010717: V: 39.593s VO: 8.910s A: 0.000s Sys: 16.983s = 65.485s Ronin trailer (122s): [DIV3] 640x304 24bpp 25.00 fps 820.6 kbps divx: V: 75.235s VO: 20.104s A: 0.000s Sys: 35.425s = 130.764s divxds: V: 76.516s VO: 19.906s A: 0.000s Sys: 35.486s = 131.907s ffdivx-010706: V: 116.941s VO: 14.743s A: 0.000s Sys: 36.564s = 168.248s ffdivx-010711: V: 108.452s VO: 14.651s A: 0.000s Sys: 36.061s = 159.164s ffdivx-010712: V: 93.509s VO: 14.644s A: 0.000s Sys: 36.192s = 144.344s ffdivx-010716: V: 90.271s VO: 14.666s A: 0.000s Sys: 36.401s = 141.337s ffdivx-010717: V: 78.693s VO: 14.645s A: 0.000s Sys: 36.676s = 130.014s Hannibal trailer (139s): [DIV3] 480x260 24bpp 24.00 fps 185.7 kbps divx: V: 35.121s VO: 13.411s A: 0.000s Sys: 24.938s = 73.470s divxds: V: 36.113s VO: 13.567s A: 0.000s Sys: 24.449s = 74.129s ffdivx-010706: V: 70.192s VO: 13.309s A: 0.000s Sys: 24.315s = 107.816s ffdivx-010711: V: 66.790s VO: 13.295s A: 0.000s Sys: 24.121s = 104.205s ffdivx-010712: V: 47.430s VO: 13.350s A: 0.000s Sys: 23.983s = 84.763s ffdivx-010716: V: 44.439s VO: 13.434s A: 0.000s Sys: 24.167s = 82.041s ffdivx-010717: V: 39.773s VO: 13.439s A: 0.000s Sys: 24.392s = 77.604s Star Wars 1 trailer (147s): [DIV3] 640x288 24bpp 24.00 fps 995.3 kbps divx: V: 82.215s VO: 22.012s A: 0.000s Sys: 38.531s = 142.759s divxds: V: 84.066s VO: 21.884s A: 0.000s Sys: 38.604s = 144.553s ffdivx-010712: V: 102.480s VO: 15.861s A: 0.000s Sys: 39.604s = 157.945s ffdivx-010716: V: 97.965s VO: 15.720s A: 0.000s Sys: 39.653s = 153.338s ffdivx-010717: V: 87.281s VO: 15.937s A: 0.000s Sys: 43.153s = 146.371s -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From hh at holtschneider.com Tue Jul 17 14:00:17 2001 From: hh at holtschneider.com (Henning Holtschneider) Date: Tue, 17 Jul 2001 14:00:17 +0200 Subject: [Mplayer-users] Elementary streams (ES) References: <200107170927.LAA19568@thot.banki.hu> <011b01c10eaa$7b0e52d0$22e81cd4@kruemelmonster> <004101c10eab$c3718dc0$6400a8c0@p3> Message-ID: <001501c10eb8$0c0881e0$eae81cd4@leia> > but i have a question to you, henning ... > do you have already a programm for watching divx via DVB-s on TV ??? No, I'm still looking at what's already available and what could be modified to be used. There is no ready-to-run program that can do the task at the moment. I have tried ffmpeg (http://ffmpeg.sourceforge.net) which can read and write a variety of formats and it looks very promising. However, it still has problems generating an MPEG stream that can be understood by the DVB card and it's not fast enough to do the job in realtime on my PII/333 DVB machine. Could one of the developers perhaps comment on this: the DVB card has a built-in MPEG decoder that can AFAIK decode MPEG-1 and MPEG-2 streams. You cannot feed raw YUV data into it. Consequently, the existing video file (DivX, ASF, etc.) has to be converted to MPEG2 (MPEG-1 would be ok only for low-quality input files) on the fly. The easiest way would IMHO be to create an MPEG-2 stream consisting only of I-frames. What CPU is needed to do this in real-time (25-30 fps) and can this be done at all? >From what I have seen so far, MPlayer would be a good solution but since the DVB card is no "VGA card running at TV-screen resolution" it would probably break the design of MPlayer?! BTW, the DVB card has built-in OSD functionality ;-) Regards, hh _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 17 14:21:06 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 17 Jul 2001 14:21:06 +0200 (CEST) Subject: [Mplayer-users] Elementary streams (ES) In-Reply-To: <001501c10eb8$0c0881e0$eae81cd4@leia> Message-ID: <200107171221.OAA46586@thot.banki.hu> Hi, > > but i have a question to you, henning ... > > do you have already a programm for watching divx via DVB-s on TV ??? > > No, I'm still looking at what's already available and what could be modified > to be used. There is no ready-to-run program that can do the task at the > moment. I have tried ffmpeg (http://ffmpeg.sourceforge.net) which can read > and write a variety of formats and it looks very promising. However, it > still has problems generating an MPEG stream that can be understood by the > DVB card and it's not fast enough to do the job in realtime on my PII/333 > DVB machine. > > Could one of the developers perhaps comment on this: the DVB card has a > built-in MPEG decoder that can AFAIK decode MPEG-1 and MPEG-2 streams. You > cannot feed raw YUV data into it. Consequently, the existing video file > (DivX, ASF, etc.) has to be converted to MPEG2 (MPEG-1 would be ok only for > low-quality input files) on the fly. The easiest way would IMHO be to create > an MPEG-2 stream consisting only of I-frames. What CPU is needed to do this > in real-time (25-30 fps) and can this be done at all? Strong. I think not the encoding is the problem, rather the bandwith. You will get very high bitrate stream if using only I frames, and keep high image quality. It can be even 10-20 MB/s. PC memory and PCI bus speed will be the bottleneck... And of course, you need a fast CPU to create this 10-20 MB/s steram from single bits using VLC tables... I still prefer using Divx -> MPEG2 I+P transcoding, using Q and MC values from the divx. Btw your p2/333 will be NEVER enough for this, as you have to decode DIVX stream to YV12 frames, and then encode it to mpeg2. And the card will decode it so it's triple work. The only way to get around this is transcoding, but I don't know is it possible at all, I mean can one translate mpeg 4 parameters (Q bits and MC vectors) to MPEG2 "language". For example, mpeg4 uses unlimited MC, so you can refer blocks outside of the image border. Mpeg2 doesn't allow this. > >From what I have seen so far, MPlayer would be a good solution but since the > DVB card is no "VGA card running at TV-screen resolution" it would probably > break the design of MPlayer?! If it encodes from YV12 images, it won't. If it uses transcoding, it will. But video conversion and encoding are planned features for mplayer, but currently they are at low priority. > BTW, the DVB card has built-in OSD functionality ;-) Does it have nice antialiased fonts, like MPlayer's? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From hh at holtschneider.com Tue Jul 17 14:46:48 2001 From: hh at holtschneider.com (Henning Holtschneider) Date: Tue, 17 Jul 2001 14:46:48 +0200 Subject: [Mplayer-users] Elementary streams (ES) References: <200107171042.MAA14752@thot.banki.hu> Message-ID: <002d01c10ebe$8b4bf2b0$eae81cd4@leia> > > 80 cm should be enough (you live in Hungary, right?). You just need an LNB > yes, i'm living at Budapest. > > > that can handle the digital frequency ranges. > what frequecy range are they using? They are mostly using frequencies on the high band (11.7 - 12.75 GHz). Your LNB should support the full range of 10.7 - 12.75 GHz. In Germany, the LNB capable of receiving the low and high band frequencies is called "Universal-LNB". > > The image quality is very good and since the card has its own TV-out, you > > won't lose any quality on the way to your TV screen ;-) > > What is on the card? mpeg2 decoder and sat receiver chips? Yes, that's about it. More information about the chips on the card and some pictures are available at http://www.geocities.com/buenavista18/ (mostly about the tuner chip) and http://www.cdaniel.de/elektronik-dvb.phtml (the rest, German only). Regards, hh _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From hh at holtschneider.com Tue Jul 17 15:21:41 2001 From: hh at holtschneider.com (Henning Holtschneider) Date: Tue, 17 Jul 2001 15:21:41 +0200 Subject: [Mplayer-users] Elementary streams (ES) References: <200107171221.OAA46586@thot.banki.hu> Message-ID: <005001c10ec3$6c91f180$eae81cd4@leia> > Strong. I think not the encoding is the problem, rather the bandwith. > You will get very high bitrate stream if using only I frames, and keep > high image quality. It can be even 10-20 MB/s. PC memory and PCI bus speed > will be the bottleneck... Uhm, I don't think the DVB card can cope with such high bitrates ... > I still prefer using Divx -> MPEG2 I+P transcoding, using Q and MC values > from the divx. > Btw your p2/333 will be NEVER enough for this, as you have to decode DIVX > stream to YV12 frames, and then encode it to mpeg2. And the card will decode > it so it's triple work. The only way to get around this is transcoding, Hmm, would the PII/333 be enough to decode the DivX stream and display it using the framebuffer driver in full-screen mode? What about the image quality? I've got a ATI Rage 128 card with TV-Out in my DVB box, but I haven't got it to work with Linux framebuffer drivers at 50 Hz (it won't switch below 60 Hz refresh rate although that works fine under Windows). The image quality at 640x480 is ugly compared to the DVB card :^) and there is no way to properly center the image on the TV screen. I'm thinking about replacing the ATI card with a Matrox card which seems to have a better framebuffer driver available. Is this a good choice? My main goal is to keep the DVB PC as silent as possible because I'm using it as a standalone VCR (or should I say VDR?). A CPU that needs an active heatsink is no option so everything I have to do in realtime has to be extremely efficient and must run on a slow CPU (<= PII @ ~ 400 MHz). As far as I see it, there are currently two options: 1. convert DivX to MPEG-2. Pros: high image quality because of output through DVB card, no VGA card required. Cons: slow, huge computing overhead (DivX->MPEG-2 -> MPEG2->TV screen), no software available as of now 2. play DivX via Mplayer on framebuffer display. Pros: player readily available, framebuffer display can be used for more than just video streams, Cons: what VGA card with TV-out comes close to the DVB card's image quality? > > BTW, the DVB card has built-in OSD functionality ;-) > Does it have nice antialiased fonts, like MPlayer's? Ha, you must be joking ... The OSD is limited to a maximum of 16 colors and there isn't even enough memory being reserved by the firmware that you can fill the entire screen then ;-))) Regards, hh _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Tue Jul 17 16:52:03 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Tue, 17 Jul 2001 16:52:03 +0200 Subject: [Mplayer-users] Elementary streams (ES) References: <200107171042.MAA14752@thot.banki.hu> Message-ID: <003001c10ed0$0d7f5680$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* Hi arpi ... i've asked the guyes from galaxies (another producer of such identical card, the could / would make you a demo-price ... the price will be 329 DM exkl. sales taxes. mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From tibcu at sch.bme.hu Tue Jul 17 18:25:04 2001 From: tibcu at sch.bme.hu (Balazs Tibor) Date: Tue, 17 Jul 2001 18:25:04 +0200 (MEST) Subject: [Mplayer-users] ff-divx benchmarks... In-Reply-To: Message-ID: I continue: On Mon, 16 Jul 2001, Tibor Bal?zs wrote: the order is always: Detected video codec: [ffdivx] drv:5 (FFmpeg DivX ;-) (MS MPEG-4 v3)) Detected video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) Detected video codec: [divx] drv:2 (DivX ;-) (MS MPEG-4 v3)) MPlayer 0.17cvs-010716-13:02 > VIDEO: [DIV3] 384x288 24bpp 29.97 fps 966.1 kbps (117.9 kbyte/s) > [V] filefmt:3 fourcc:0x33564944 size:384x288 fps:29.97 ftime:=0.0334 vo_dga: DGA 1.0 compatibility code: Using XF86VidMode for mode switching! > -frames 500 -benchmark -osdlevel 0 -nosound -bpp 32 -vfm 5 -v ^^^^^^^^^^^^^^ changing > -vo svga -bpp 32 > > BENCHMARKs: V: 16.449s VO: 9.546s A: 0.000s Sys: 5.374s = 31.368s > BENCHMARKs: V: 14.782s VO: 5.969s A: 0.000s Sys: 5.430s = 26.181s > BENCHMARKs: V: 14.680s VO: 5.983s A: 0.000s Sys: 5.391s = 26.054s -vo dga -bpp 32 (X runs in 32 bpp) BENCHMARKs: V: 15.545s VO: 3.869s A: 0.000s Sys: 0.458s = 19.872s BENCHMARKs: V: 14.688s VO: 17.050s A: 0.000s Sys: 0.417s = 32.154s BENCHMARKs: V: 14.545s VO: 17.096s A: 0.000s Sys: 0.380s = 32.021s -vo dga -bpp 24 (X still in 32 bpp) (notice the diffs with dlls!! WHY?) BENCHMARKs: V: 15.534s VO: 3.852s A: 0.000s Sys: 0.356s = 19.743s BENCHMARKs: V: 13.653s VO: 3.998s A: 0.000s Sys: 0.388s = 18.038s BENCHMARKs: V: 13.575s VO: 3.947s A: 0.000s Sys: 0.380s = 17.902s -vo x11 (X still in 32 bpp) BENCHMARKs: V: 16.153s VO: 3.843s A: 0.000s Sys: 5.120s = 25.116s BENCHMARKs: V: 14.878s VO: 4.618s A: 0.000s Sys: 5.207s = 24.703s BENCHMARKs: V: 14.706s VO: 4.755s A: 0.000s Sys: 5.255s = 24.716s > -bpp 24 svga > BENCHMARKs: V: 16.345s VO: 13.614s A: 0.000s Sys: 4.132s = 34.091s > BENCHMARKs: V: 13.839s VO: 4.487s A: 0.000s Sys: 4.136s = 22.461s > BENCHMARKs: V: 13.588s VO: 4.359s A: 0.000s Sys: 4.066s = 22.013s -vo dga (X in 24 bpp) BENCHMARKs: V: 15.668s VO: 13.126s A: 0.000s Sys: 0.371s = 29.165s BENCHMARKs: V: 13.723s VO: 12.811s A: 0.000s Sys: 0.382s = 26.916s BENCHMARKs: V: 13.491s VO: 12.830s A: 0.000s Sys: 0.391s = 26.711s -vo x11 (X in 24 bpp) BENCHMARKs: V: 16.281s VO: 9.014s A: 0.000s Sys: 6.755s = 32.050s BENCHMARKs: V: 13.713s VO: 3.385s A: 0.000s Sys: 7.043s = 24.141s BENCHMARKs: V: 13.735s VO: 3.405s A: 0.000s Sys: 6.930s = 24.069s > -bpp 16 svga > BENCHMARKs: V: 16.212s VO: 6.751s A: 0.000s Sys: 2.819s = 25.783s > BENCHMARKs: V: 13.711s VO: 2.746s A: 0.000s Sys: 2.790s = 19.247s > not working -vo dga -bpp 16 (X in 16 bpp) BENCHMARKs: V: 15.928s VO: 3.836s A: 0.000s Sys: 0.354s = 20.118s BENCHMARKs: V: 13.468s VO: 8.520s A: 0.000s Sys: 0.381s = 22.369s not working -vo dga -bpp 15 (X still in 16 bpp) (again, diff with dlls!!!) BENCHMARKs: V: 15.862s VO: 3.802s A: 0.000s Sys: 0.328s = 19.992s BENCHMARKs: V: 13.480s VO: 1.841s A: 0.000s Sys: 0.343s = 15.664s BENCHMARKs: V: 13.317s VO: 1.843s A: 0.000s Sys: 0.369s = 15.529s -vo x11 (X in 16 bpp) BENCHMARKs: V: 16.146s VO: 3.842s A: 0.000s Sys: 4.879s = 24.866s BENCHMARKs: V: 13.671s VO: 2.207s A: 0.000s Sys: 4.213s = 20.091s BENCHMARKs: V: 13.337s VO: 2.158s A: 0.000s Sys: 4.860s = 20.355s > -bpp 15 svga > BENCHMARKs: V: 16.296s VO: 7.760s A: 0.000s Sys: 2.805s = 26.861s > BENCHMARKs: V: 13.558s VO: 2.917s A: 0.000s Sys: 2.882s = 19.358s > BENCHMARKs: V: 13.292s VO: 2.951s A: 0.000s Sys: 2.772s = 19.015s -vo dga (X in 15 bpp) (note: dlls should be as fast as above -bpp 15 in 16bpp) BENCHMARKs: V: 15.808s VO: 5.049s A: 0.000s Sys: 0.394s = 21.251s BENCHMARKs: V: 13.364s VO: 8.517s A: 0.000s Sys: 0.357s = 22.239s BENCHMARKs: V: 13.193s VO: 8.568s A: 0.000s Sys: 0.347s = 22.108s -vo x11 (X in 15 bpp) (dlls faster, than with dga...) BENCHMARKs: V: 16.194s VO: 5.119s A: 0.000s Sys: 4.721s = 26.034s BENCHMARKs: V: 13.538s VO: 2.139s A: 0.000s Sys: 4.833s = 20.511s BENCHMARKs: V: 13.447s VO: 2.297s A: 0.000s Sys: 4.772s = 20.515s > -vo null > BENCHMARKs: V: 15.732s VO: 0.005s A: 0.000s Sys: 0.217s = 15.954s > BENCHMARKs: V: 11.949s VO: 0.006s A: 0.000s Sys: 0.222s = 12.177s > BENCHMARKs: V: 11.872s VO: 0.005s A: 0.000s Sys: 0.213s = 12.090s and actually the clip (using -frames 500) was 16.6 seconds long PLEASE tell me somebody, why those interesting slowdowns of win codecs with dga out exist? yes, ffdivx is slower in 24 and 15 bpp modes than in 32 & 16 ones, but there's a reason, why it is: no MMX colorspace transform when bpp is not a multiple of 8 but this dll thing is too strange; theoretically DGA 1.0 can't make use of -bpp, but actually it does!!! so again: why? As you can see, ffdivx (at this bitrate) is still too slow on my machine (as P1s don't have MMX2, SSE, 3Dnow! and like that, today's patch won't speedup things for me, so yesterday's tests should be up-to-date in my case) The only situation, when ffdivx performance was close to the dll ones' occured when running -vo x11 in 32bpp X, so it's not useful, because it's so slow... I hope, I could send some useful information :) Tibcu (ps: and why is vfw dll not working with svga -bpp 16 and dga (-bpp 16) in 16 bpp X but working with x11 and dga -bpp 15 at 16 bpp X?) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Tue Jul 17 18:55:00 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Tue, 17 Jul 2001 18:55:00 +0200 Subject: [Mplayer-users] new ffmpeg decoder In-Reply-To: References: Message-ID: <20010717185500.A23253@hoth.amu.edu.pl> anyone else seen pink shadows/areas on screen (ffmpeg codec)? (tested on P3-750 and K6-333) VFW, DShow and ffmpeg_mplayer_2001-07-11 works fine .. Best regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 17 20:15:21 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 17 Jul 2001 20:15:21 +0200 (CEST) Subject: [Mplayer-users] new ffmpeg decoder In-Reply-To: <20010717185500.A23253@hoth.amu.edu.pl> Message-ID: <200107171815.UAA45960@thot.banki.hu> Hi, > anyone else seen pink shadows/areas on screen (ffmpeg codec)? > (tested on P3-750 and K6-333) > > VFW, DShow and ffmpeg_mplayer_2001-07-11 works fine .. hmm. i've seen such effekt (things getting ping/purple after 5-10 secs and colors get ok again at next keyframe), with the first working version of ffmpeg codec. it was a rounding bug, and gerard fixed it. after it was fixed, i've commited ffmpeg stuff to cvs... maybe some optimization bring this bug back? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Tue Jul 17 20:43:59 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Tue, 17 Jul 2001 20:43:59 +0200 Subject: [Mplayer-users] new ffmpeg decoder In-Reply-To: <200107171815.UAA45960@thot.banki.hu> References: <20010717185500.A23253@hoth.amu.edu.pl> <200107171815.UAA45960@thot.banki.hu> Message-ID: <20010717204359.A26781@hoth.amu.edu.pl> On Tue, Jul 17, 2001 at 08:15:21PM +0200, Arpi wrote: > Hi, > > > anyone else seen pink shadows/areas on screen (ffmpeg codec)? > > (tested on P3-750 and K6-333) > > > > VFW, DShow and ffmpeg_mplayer_2001-07-11 works fine .. > > hmm. i've seen such effekt (things getting ping/purple after 5-10 secs > and colors get ok again at next keyframe) exactly .. > it was a rounding bug, and gerard fixed it. > after it was fixed, i've commited ffmpeg stuff to cvs... uploaded example (170th frame from trailer of Dune) to ftp://mplayer.dev.hu/MPlayer/incoming/ as: -rw-r--r-- 1 ftp ftp 667923 Lip 17 18:32 00000170_original.png -rw-r--r-- 1 ftp ftp 667923 Lip 17 18:32 00000170_pink.png > maybe some optimization bring this bug back? mplayer 2001-07-16 11:27 works fine :) imho this is smth in last optimized: dsputil.c or/and dsputil_mmx.c Best Regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From data at polinux2.eui.upv.es Tue Jul 17 21:44:13 2001 From: data at polinux2.eui.upv.es (data at polinux2.eui.upv.es) Date: Tue, 17 Jul 2001 21:44:13 +0200 Subject: [Mplayer-users] BUG in last CVS checkout... Message-ID: <20010717214413.A1123@polinux2.eui.upv.es> I know it says I should not send a bug but... Distro: Mandrake 8.0 kernel: 2.4.6-ac2 libc: 2.2.2 X: 4.1.0-mdk4 gcc: gcc version 2.96 20000731 (Linux-Mandrake 8.0 2.96-0.48mdk) ld: GNU ld version 2.10.91 (with BFD 2.10.1.0.2) as: GNU assembler 2.10.91 model name : AMD-K6(tm) 3D processor stepping : 12 cpu MHz : 501.148 Matrox G450 16 RAM Checking assembler (as) ... 2.10.91, ok Checking Linux kernel version ... 2.4.6-ac2, ok Install prefix: /usr/local Checking for cpu vendor ... AuthenticAMD ( 5:8:12 ) Checking for cpu type ... AMD-K6(tm) 3D processor Optimizing to ... k6 Checking for mmx support ... yes Checking for mmx2 support ... no Checking for 3dnow support ... yes Checking for 3dnowex support ... no Checking for sse support ... no Checking for mtrr support ... yes Screen size ... 1x1 Checking for X11 libs ... -L/usr/X11R6/lib Checking for X11 headers ... Checking mga_vid device ... yes Checking for xmga ... yes Checking for SDL ... yes Checking for GGI ... no Checking for OpenGL ... yes Checking for Xv ... yes Checking for X11 ... yes Checking for DGA ... yes Checking for DGA 2.0 .. yes Checking for Xf86VM ... yes Checking for SVGAlib ... no Checking for FBDev ... yes Checking for OSS Audio ... yes Checking for ALSA Audio ... no Checking for ESD Audio ... yes Checking for Sun Audio ... no Checking for DeCSS support ... yes Checking for PNG support ... yes Checking for DirectShow ... yes Checking for libavcodec ... yes Checking for fastmemcpy ... yes Extra libs : -L/usr/local/lib Extra headers : -I/usr/local/include Creating config.h It has been working for a while. After today's checkout I got this: dsputil.c: In function `put_pixels': i386/dsputil_mmx.c:130: Can't find a register in class `GENERAL_REGS' while reloading `asm'. dsputil.c: In function `put_pixels_x2': i386/dsputil_mmx.c:186: Can't find a register in class `GENERAL_REGS' while reloading `asm'. make[1]: *** [dsputil.o] Error 1 make[1]: Leaving directory `/root/video/main/libavcodec' make: *** [libavcodec/libavcodec.a] Error 2 Any ideas? _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Tue Jul 17 21:54:27 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Tue, 17 Jul 2001 21:54:27 +0200 Subject: [Mplayer-users] BUG in last CVS checkout... References: <20010717214413.A1123@polinux2.eui.upv.es> Message-ID: <000901c10efa$49ba8d20$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* why are you using gcc version 2.96 ??? you shouldn't do that!!! mfg Johannes ----- Original Message ----- From: To: Sent: Tuesday, July 17, 2001 9:44 PM Subject: [Mplayer-users] BUG in last CVS checkout... > *This message was transferred with a trial version of CommuniGate(tm) Pro* > > I know it says I should not send a bug but... > > Distro: Mandrake 8.0 > kernel: 2.4.6-ac2 > libc: 2.2.2 > X: 4.1.0-mdk4 > gcc: gcc version 2.96 20000731 (Linux-Mandrake 8.0 2.96-0.48mdk) > ld: GNU ld version 2.10.91 (with BFD 2.10.1.0.2) > as: GNU assembler 2.10.91 > model name : AMD-K6(tm) 3D processor > stepping : 12 > cpu MHz : 501.148 > Matrox G450 16 RAM > > Checking assembler (as) ... 2.10.91, ok > Checking Linux kernel version ... 2.4.6-ac2, ok > Install prefix: /usr/local > Checking for cpu vendor ... AuthenticAMD ( 5:8:12 ) > Checking for cpu type ... AMD-K6(tm) 3D processor > Optimizing to ... k6 > Checking for mmx support ... yes > Checking for mmx2 support ... no > Checking for 3dnow support ... yes > Checking for 3dnowex support ... no > Checking for sse support ... no > Checking for mtrr support ... yes > Screen size ... 1x1 > Checking for X11 libs ... -L/usr/X11R6/lib > Checking for X11 headers ... > Checking mga_vid device ... yes > Checking for xmga ... yes > Checking for SDL ... yes > Checking for GGI ... no > Checking for OpenGL ... yes > Checking for Xv ... yes > Checking for X11 ... yes > Checking for DGA ... yes > Checking for DGA 2.0 .. yes > Checking for Xf86VM ... yes > Checking for SVGAlib ... no > Checking for FBDev ... yes > Checking for OSS Audio ... yes > Checking for ALSA Audio ... no > Checking for ESD Audio ... yes > Checking for Sun Audio ... no > Checking for DeCSS support ... yes > Checking for PNG support ... yes > Checking for DirectShow ... yes > Checking for libavcodec ... yes > Checking for fastmemcpy ... yes > Extra libs : -L/usr/local/lib > Extra headers : -I/usr/local/include > Creating config.h > > > It has been working for a while. After today's checkout I got this: > > dsputil.c: In function `put_pixels': > i386/dsputil_mmx.c:130: Can't find a register in class `GENERAL_REGS' while reloading `asm'. > dsputil.c: In function `put_pixels_x2': > i386/dsputil_mmx.c:186: Can't find a register in class `GENERAL_REGS' while reloading `asm'. > make[1]: *** [dsputil.o] Error 1 > make[1]: Leaving directory `/root/video/main/libavcodec' > make: *** [libavcodec/libavcodec.a] Error 2 > > > Any ideas? > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Wed Jul 18 02:08:01 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Wed, 18 Jul 2001 00:08:01 +0000 (:) Subject: [Mplayer-users] new ffmpeg decoder In-Reply-To: <20010717204359.A26781@hoth.amu.edu.pl> Message-ID: Hi, Bohdan Horst! On 2001-07-17 20:43:59 you wrote: >On Tue, Jul 17, 2001 at 08:15:21PM +0200, Arpi wrote: > >> Hi, >> >> > anyone else seen pink shadows/areas on screen (ffmpeg codec)? >> > (tested on P3-750 and K6-333) >> > >> > VFW, DShow and ffmpeg_mplayer_2001-07-11 works fine .. >> >> hmm. i've seen such effekt (things getting ping/purple after 5-10 secs >> and colors get ok again at next keyframe) > >exactly .. > >> it was a rounding bug, and gerard fixed it. >> after it was fixed, i've commited ffmpeg stuff to cvs... > >uploaded example (170th frame from trailer of Dune) >to ftp://mplayer.dev.hu/MPlayer/incoming/ as: > >-rw-r--r-- 1 ftp ftp 667923 Lip 17 18:32 00000170_original.png >-rw-r--r-- 1 ftp ftp 667923 Lip 17 18:32 00000170_pink.png > >> maybe some optimization bring this bug back? > > >mplayer 2001-07-16 11:27 works fine :) > >imho this is smth in last optimized: >dsputil.c or/and dsputil_mmx.c > Try latest CVS - I forgot to add EMMS at end of some function - maybe it help you If no - then try recompile mplayer with --disable-mmx2 --disable-3dnow. Anyway it would be better to upload to ftp 100-500 frames of your movie (use VirtualDub to cut out them) Best regards! Nick (2001-07-18 00:04:35) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 17 22:12:47 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 17 Jul 2001 22:12:47 +0200 (CEST) Subject: [Mplayer-users] new ffmpeg decoder In-Reply-To: Message-ID: <200107172012.WAA42402@thot.banki.hu> Hi, > > > >mplayer 2001-07-16 11:27 works fine :) > > > >imho this is smth in last optimized: > >dsputil.c or/and dsputil_mmx.c > > > Try latest CVS - I forgot to add EMMS at end of some function - maybe it help you not fixed. i also have this problem with most of my files. btw i think it's a bad idea calling emms after each macroblock MC. (AFAIK emms is very slow think, 56 clocks or so on celeron) if ffmpeg doesn't uses float for divx decoding, then it's enough to call once after the whole frame is finished. it is a rounding problem at motion compensation. you should review roundings, compared mmx and c versions. it does matter a lot for divx, because the very long GOP times (500 P frames between I keyframes - a single bit error is enough if you see it 500 times iterating) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Wed Jul 18 02:22:00 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Wed, 18 Jul 2001 00:22:00 +0000 (:) Subject: [Mplayer-users] ff-divx benchmarks... Message-ID: Hi, Balazs Tibor! On 2001-07-17 18:25:04 you wrote: [snipped out] >As you can see, ffdivx (at this bitrate) is still too slow on my machine >(as P1s don't have MMX2, SSE, 3Dnow! and like that, today's patch won't >speedup things for me, so yesterday's tests should be up-to-date in my case) > Indeed today patch contains a lot of pure MMX optimized code so you should try it anyway, but as I already wrote: on my K7 this code speedup about 0% (maybe 1-2%). Mplayer's indicators are not precised enough yet. Best regards! Nick (2001-07-18 00:13:41) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Wed Jul 18 02:20:12 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Wed, 18 Jul 2001 00:20:12 +0000 (:) Subject: [Mplayer-users] BUG in last CVS checkout... In-Reply-To: <20010717214413.A1123@polinux2.eui.upv.es> Message-ID: Hi, data at polinux2.eui.upv.es! On 2001-07-17 21:44:13 you wrote: > >I know it says I should not send a bug but... > >Distro: Mandrake 8.0 >kernel: 2.4.6-ac2 >libc: 2.2.2 >X: 4.1.0-mdk4 >gcc: gcc version 2.96 20000731 (Linux-Mandrake 8.0 2.96-0.48mdk) >ld: GNU ld version 2.10.91 (with BFD 2.10.1.0.2) >as: GNU assembler 2.10.91 >model name : AMD-K6(tm) 3D processor >stepping : 12 >cpu MHz : 501.148 >Matrox G450 16 RAM > >Checking assembler (as) ... 2.10.91, ok >Checking Linux kernel version ... 2.4.6-ac2, ok >Install prefix: /usr/local >Checking for cpu vendor ... AuthenticAMD ( 5:8:12 ) >Checking for cpu type ... AMD-K6(tm) 3D processor >Optimizing to ... k6 >Checking for mmx support ... yes >Checking for mmx2 support ... no >Checking for 3dnow support ... yes >Checking for 3dnowex support ... no >Checking for sse support ... no >Checking for mtrr support ... yes >Screen size ... 1x1 >Checking for X11 libs ... -L/usr/X11R6/lib >Checking for X11 headers ... >Checking mga_vid device ... yes >Checking for xmga ... yes >Checking for SDL ... yes >Checking for GGI ... no >Checking for OpenGL ... yes >Checking for Xv ... yes >Checking for X11 ... yes >Checking for DGA ... yes >Checking for DGA 2.0 .. yes >Checking for Xf86VM ... yes >Checking for SVGAlib ... no >Checking for FBDev ... yes >Checking for OSS Audio ... yes >Checking for ALSA Audio ... no >Checking for ESD Audio ... yes >Checking for Sun Audio ... no >Checking for DeCSS support ... yes >Checking for PNG support ... yes >Checking for DirectShow ... yes >Checking for libavcodec ... yes >Checking for fastmemcpy ... yes >Extra libs : -L/usr/local/lib >Extra headers : -I/usr/local/include >Creating config.h > > >It has been working for a while. After today's checkout I got this: > >dsputil.c: In function `put_pixels': >i386/dsputil_mmx.c:130: Can't find a register in class `GENERAL_REGS' while reloading `asm'. >dsputil.c: In function `put_pixels_x2': >i386/dsputil_mmx.c:186: Can't find a register in class `GENERAL_REGS' while reloading `asm'. >make[1]: *** [dsputil.o] Error 1 >make[1]: Leaving directory `/root/video/main/libavcodec' >make: *** [libavcodec/libavcodec.a] Error 2 > > >Any ideas? Please look at gcc's version then look at RTFM/Requirements Best regards! Nick (2001-07-18 00:19:04) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Wed Jul 18 02:30:51 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Wed, 18 Jul 2001 00:30:51 +0000 (:) Subject: [Mplayer-users] new ffmpeg decoder In-Reply-To: <200107172012.WAA42402@thot.banki.hu> Message-ID: Hi, Arpi! On 2001-07-17 22:12:47 you wrote: >Hi, > >> > >> >mplayer 2001-07-16 11:27 works fine :) >> > >> >imho this is smth in last optimized: >> >dsputil.c or/and dsputil_mmx.c >> > >> Try latest CVS - I forgot to add EMMS at end of some function - maybe it help you >not fixed. i also have this problem with most of my files. > Well, I'll dig out ;) >btw i think it's a bad idea calling emms after each macroblock MC. >(AFAIK emms is very slow think, 56 clocks or so on celeron) >if ffmpeg doesn't uses float for divx decoding, then it's enough to >call once after the whole frame is finished. > Unfortunately ffmpeg contains a FPU code and I'm not sure where will control after executing these PIXELS_TAB_FUNCTION. Anyway it's needed to be sure that FPU code works propertly. >it is a rounding problem at motion compensation. you should review >roundings, compared mmx and c versions. There no problem, only if I've done some typo in registers names. >From precision point - this code is same as "C". (because it's INTEGER ARITHMETIC) And what about --disable-mmx2 on Cel2? >it does matter a lot for divx, because the very long GOP times (500 P frames >between I keyframes - a single bit error is enough if you see it 500 times >iterating) Maybe it would be better a little sample of movie on FTP or external URL? Best regards! Nick (2001-07-18 00:24:12) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From data at polinux2.eui.upv.es Wed Jul 18 08:10:01 2001 From: data at polinux2.eui.upv.es (data at polinux2.eui.upv.es) Date: Wed, 18 Jul 2001 08:10:01 +0200 Subject: [Mplayer-users] BUG in last CVS checkout... In-Reply-To: References: <20010717214413.A1123@polinux2.eui.upv.es> Message-ID: <20010718081001.A3935@polinux2.eui.upv.es> On Wed, Jul 18, 2001 at 12:20:12AM +0000, Nick Kurshev wrote: > Hi, data at polinux2.eui.upv.es! > > On 2001-07-17 21:44:13 you wrote: > > > > >I know it says I should not send a bug but... -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > >Any ideas? > > Please look at gcc's version then look at RTFM/Requirements > But it was working before. That's why I just tryed... J. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Wed Jul 18 09:58:14 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Wed, 18 Jul 2001 10:58:14 +0300 (EEST) Subject: [Mplayer-users] broken movie? Message-ID: i've got a broken asf movie. when mplayer reaches the broken bit, it terminates. if i fast-forward past it, the rest plays fine. the bad part is that if i don't ffwd in the right moment, i hit the bad spot and mplayer terminates. worse yet, i must fast forward from the beginning of the movie, because for some reason if i use -ss, the seek bar osd doesn't disappear at all. isn't it possible to search for the next good chunk when the player hits a corrupted part of the video, instead of terminating? also i have another broken movie, this time an avi. with it it is impossible to even skip past the broken section. when played with aviplay, though, the movie only skips at that point and then continues normally. i know that mplayer isn't avifile, but since avifile can do it, it is possible. on the other hand, avifile behaves much worse with the broken asf - it just states that the broken point is the end of the movie and there is no way to get past it. AFAIK, windoze media player stops the movie at such breaks, but you can still seek past it. is there any solution to this? _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Wed Jul 18 10:13:57 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Wed, 18 Jul 2001 10:13:57 +0200 Subject: [Mplayer-users] new ffmpeg decoder In-Reply-To: References: <20010717204359.A26781@hoth.amu.edu.pl> Message-ID: <20010718101357.A55716@hoth.amu.edu.pl> On Wed, Jul 18, 2001 at 12:08:01AM +0000, Nick Kurshev wrote: > Hi, Bohdan Horst! > > On 2001-07-17 20:43:59 you wrote: > > >On Tue, Jul 17, 2001 at 08:15:21PM +0200, Arpi wrote: > > > >> Hi, > >> > >> > anyone else seen pink shadows/areas on screen (ffmpeg codec)? > >> > (tested on P3-750 and K6-333) > >> > > >> > VFW, DShow and ffmpeg_mplayer_2001-07-11 works fine .. > >> > >> hmm. i've seen such effekt (things getting ping/purple after 5-10 secs > >> and colors get ok again at next keyframe) > > > >exactly .. > > > >> it was a rounding bug, and gerard fixed it. > >> after it was fixed, i've commited ffmpeg stuff to cvs... > > > >uploaded example (170th frame from trailer of Dune) > >to ftp://mplayer.dev.hu/MPlayer/incoming/ as: > > > >-rw-r--r-- 1 ftp ftp 667923 Lip 17 18:32 00000170_original.png > >-rw-r--r-- 1 ftp ftp 667923 Lip 17 18:32 00000170_pink.png > > > >> maybe some optimization bring this bug back? > > > > > >mplayer 2001-07-16 11:27 works fine :) > > > >imho this is smth in last optimized: > >dsputil.c or/and dsputil_mmx.c > > > Try latest CVS - I forgot to add EMMS at end of some function - maybe it help you > If no - then try recompile mplayer with --disable-mmx2 --disable-3dnow. still not work :( > Anyway it would be better to upload to ftp 100-500 frames of your movie > (use VirtualDub to cut out them) uploaded dune.avi to ftp://mplayer.dev.hu/MPlayer/incoming (try 170th frame) VirtualDub doesn't work on my unix box :) Best Regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Wed Jul 18 10:36:26 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Wed, 18 Jul 2001 10:36:26 +0200 Subject: [Mplayer-users] new ffmpeg decoder In-Reply-To: <20010718101357.A55716@hoth.amu.edu.pl> References: <20010717204359.A26781@hoth.amu.edu.pl> <20010718101357.A55716@hoth.amu.edu.pl> Message-ID: <20010718103626.A57003@hoth.amu.edu.pl> On Wed, Jul 18, 2001 at 10:13:57AM +0200, Bohdan Horst wrote: > > Try latest CVS - I forgot to add EMMS at end of some function - maybe it help you > > If no - then try recompile mplayer with --disable-mmx2 --disable-3dnow. > > still not work :( small update: --disable-3dnow (on AMD) and --disable-mmx2 (on P3) helps Best regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 18 10:53:18 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 18 Jul 2001 10:53:18 +0200 (CEST) Subject: [Mplayer-users] broken movie? In-Reply-To: Message-ID: <200107180853.KAA42184@thot.banki.hu> Hi, > i've got a broken asf movie. when mplayer reaches the broken bit, it > terminates. if i fast-forward past it, the rest plays fine. the bad part is > that if i don't ffwd in the right moment, i hit the bad spot and mplayer > terminates. worse yet, i must fast forward from the beginning of the movie, > because for some reason if i use -ss, the seek bar osd doesn't disappear at > all. isn't it possible to search for the next good chunk when the player hits > a corrupted part of the video, instead of terminating? > > also i have another broken movie, this time an avi. with it it is impossible > to even skip past the broken section. when played with aviplay, though, the > movie only skips at that point and then continues normally. i know that > mplayer isn't avifile, but since avifile can do it, it is possible. on the > other hand, avifile behaves much worse with the broken asf - it just states > that the broken point is the end of the movie and there is no way to get past > it. AFAIK, windoze media player stops the movie at such breaks, but you can > still seek past it. > > is there any solution to this? yes, please upload these files to ftp://mplayer.dev.hu/MPlayer/incoming/ I'll check them and fix mplayer. MPlayer shouldn't stop/crash/etc with broken files. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Wed Jul 18 11:22:05 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Wed, 18 Jul 2001 11:22:05 +0200 Subject: [Mplayer-users] new ffmpeg decoder In-Reply-To: <20010718103626.A57003@hoth.amu.edu.pl> References: <20010717204359.A26781@hoth.amu.edu.pl> <20010718101357.A55716@hoth.amu.edu.pl> <20010718103626.A57003@hoth.amu.edu.pl> Message-ID: <20010718112204.B57003@hoth.amu.edu.pl> On Wed, Jul 18, 2001 at 10:36:26AM +0200, Bohdan Horst wrote: > On Wed, Jul 18, 2001 at 10:13:57AM +0200, Bohdan Horst wrote: > > > > Try latest CVS - I forgot to add EMMS at end of some function - maybe it help you > > > If no - then try recompile mplayer with --disable-mmx2 --disable-3dnow. > > > > still not work :( > > small update: > --disable-3dnow (on AMD) and --disable-mmx2 (on P3) helps /dsputil_mmx.c/1.5/Wed Jul 18 09:05:05 2001/-kb/ works fine :) Best regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 18 11:32:40 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 18 Jul 2001 11:32:40 +0200 (CEST) Subject: [Mplayer-users] new ffmpeg decoder In-Reply-To: <20010718112204.B57003@hoth.amu.edu.pl> Message-ID: <200107180932.LAA50376@thot.banki.hu> Hi, > > > > Try latest CVS - I forgot to add EMMS at end of some function - maybe it help you > > > > If no - then try recompile mplayer with --disable-mmx2 --disable-3dnow. > > > > > > still not work :( > > > > small update: > > --disable-3dnow (on AMD) and --disable-mmx2 (on P3) helps > > /dsputil_mmx.c/1.5/Wed Jul 18 09:05:05 2001/-kb/ works fine :) yea, it's ok for me too! great work! A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Wed Jul 18 15:33:40 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Wed, 18 Jul 2001 13:33:40 +0000 (:) Subject: [Mplayer-users] new ffmpeg decoder Message-ID: Hi, Bohdan Horst! On 2001-07-18 10:36:26 you wrote: >On Wed, Jul 18, 2001 at 10:13:57AM +0200, Bohdan Horst wrote: > >> > Try latest CVS - I forgot to add EMMS at end of some function - maybe it help you >> > If no - then try recompile mplayer with --disable-mmx2 --disable-3dnow. >> >> still not work :( > >small update: >--disable-3dnow (on AMD) and --disable-mmx2 (on P3) helps In this case I probably fixed this bug. Yes, there was wrongly MXM2-3dNow optimized function put_pixels_xy2, which for now has only MMX version. This optimization works correctly for most cases but for trivial cases (when arrays are consist from 0 or 0xFF) it produces incorrect result. Best regards! Nick (2001-07-18 13:11:11) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Wed Jul 18 15:57:54 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Wed, 18 Jul 2001 13:57:54 +0000 (:) Subject: [Mplayer-users] BUG in last CVS checkout... In-Reply-To: <20010718081001.A3935@polinux2.eui.upv.es> Message-ID: Hi, data at polinux2.eui.upv.es! On 2001-07-18 08:10:01 you wrote: >On Wed, Jul 18, 2001 at 12:20:12AM +0000, Nick Kurshev wrote: >> Hi, data at polinux2.eui.upv.es! >> >> On 2001-07-17 21:44:13 you wrote: >> >> > >> >I know it says I should not send a bug but... >-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > >> >Any ideas? >> >> Please look at gcc's version then look at RTFM/Requirements >> > >But it was working before. That's why I just tryed... It's enough unstable thing - it may work but may not. It depends from function which contain inline assembler Yestoday I've added new assembler stuff to mplayer and you get a error message, since it works on 2.95.2+ compilers it's a bug of your compiler. Best regards! Nick (2001-07-18 13:55:50) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Wed Jul 18 12:39:33 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Wed, 18 Jul 2001 13:39:33 +0300 (EEST) Subject: [Mplayer-users] cyrillic fonts? In-Reply-To: <200107171014.MAA10832@thot.banki.hu> Message-ID: On Tue, 17 Jul 2001, Arpi wrote: umm... is this supposed to be empty? > Hi, > > > hello there > > > > all over the two available sites (mplayer.sourceforge.net and mplayer.dev.hu) > > there are references to cyrillic osd fonts (bgfont.zip). the links however > > are broken on both sites (they point to different places). i could not find > > any mention about that condition in the documentation (cyrillic is listed as > > available everywhere). can somebody tell me where to find the fonts or why > > have they been removed? > > > > > > _______________________________________________ > > Mplayer-users mailing list > > Mplayer-users at lists.sourceforge.net > > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > > > > > > A'rpi / Astral & ESP-team > > -- > mailto:arpi at thot.banki.hu > http://esp-team.scene.hu > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Wed Jul 18 12:38:41 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Wed, 18 Jul 2001 13:38:41 +0300 (EEST) Subject: [Mplayer-users] broken movie? In-Reply-To: <200107180853.KAA42184@thot.banki.hu> Message-ID: On Wed, 18 Jul 2001, Arpi wrote: > > is there any solution to this? > yes, please upload these files to ftp://mplayer.dev.hu/MPlayer/incoming/ > I'll check them and fix mplayer. MPlayer shouldn't stop/crash/etc with > broken files. i would, but they're quite large (full movies - one is 600 megs, the other about 400). _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From rpbrown at xtra.co.nz Wed Jul 18 13:11:52 2001 From: rpbrown at xtra.co.nz (mdew) Date: Wed, 18 Jul 2001 23:11:52 +1200 Subject: [Mplayer-users] broken movie? In-Reply-To: <200107180853.KAA42184@thot.banki.hu> References: <200107180853.KAA42184@thot.banki.hu> Message-ID: <20010718231152.52605489.rpbrown@xtra.co.nz> > > is there any solution to this? > yes, please upload these files to ftp://mplayer.dev.hu/MPlayer/incoming/ > I'll check them and fix mplayer. MPlayer shouldn't stop/crash/etc with > broken files. a few weeks ago i ripped a DVD onto my hdd..and for somereason, one of the vobs has a br0k3n track, once mplayer hit the br0k3n track in the vob...everything slowed down, the FPS of the movie was sooo slloooww.. sure that was a few weeks ago, so mplayer couldve changed. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From rpbrown at xtra.co.nz Wed Jul 18 14:43:12 2001 From: rpbrown at xtra.co.nz (mdew) Date: Thu, 19 Jul 2001 00:43:12 +1200 Subject: [Mplayer-users] mplayer cvs compile error Message-ID: <20010719004312.3b74338d.rpbrown@xtra.co.nz> gcc -c -O4 -march=i686 -mcpu=i686 -pipe -ffast-math -fomit-frame-pointer -I. -I.. -I/usr/include/SDL -D_REENTRANT -I/usr/local/include -DMPG12PLAY -o vo_sdl.o vo_sdl.c gcc -c -O4 -march=i686 -mcpu=i686 -pipe -ffast-math -fomit-frame-pointer -I. -I.. -I/usr/include/SDL -D_REENTRANT -I/usr/local/include -DMPG12PLAY -o vo_ggi.o vo_ggi.c vo_ggi.c:23: ggi/ggi.h: No such file or directory vo_ggi.c:54: parse error before `ggi_visual_t' vo_ggi.c:54: warning: no semicolon at end of struct or union vo_ggi.c:55: warning: data definition has no type or storage class vo_ggi.c:92: parse error before `}' vo_ggi.c:92: warning: data definition has no type or storage class vo_ggi.c: In function `ggi_setmode': vo_ggi.c:96: parse error before `mode' vo_ggi.c: At top level: vo_ggi.c:105: parse error before `pal' vo_ggi.c:105: warning: data definition has no type or storage class vo_ggi.c:107: parse error before `if' vo_ggi.c:147: parse error before `.' vo_ggi.c:147: warning: data definition has no type or storage class vo_ggi.c:152: parse error before `.' vo_ggi.c:152: warning: data definition has no type or storage class vo_ggi.c:153: warning: data definition has no type or storage class vo_ggi.c:154: parse error before `return' vo_ggi.c:160: parse error before `.' vo_ggi.c:160: warning: data definition has no type or storage class vo_ggi.c:161: warning: data definition has no type or storage class vo_ggi.c:162: parse error before `return' vo_ggi.c:167: request for member `visible' in something not a structure or union vo_ggi.c:167: warning: data definition has no type or storage class vo_ggi.c:168: request for member `visible' in something not a structure or union vo_ggi.c:168: warning: data definition has no type or storage class vo_ggi.c:169: `d_depth' undeclared here (not in a function) vo_ggi.c:169: warning: data definition has no type or storage class vo_ggi.c:172: parse error before `.' vo_ggi.c:189: parse error before `.' vo_ggi.c:189: warning: data definition has no type or storage class vo_ggi.c: In function `init': vo_ggi.c:250: request for member `driver' in something not a structure or union vo_ggi.c:252: request for member `vis' in something not a structure or union vo_ggi.c:252: request for member `driver' in something not a structure or union vo_ggi.c:255: request for member `driver' in something not a structure or union vo_ggi.c:255: request for member `driver' in something not a structure or union vo_ggi.c:261: request for member `driver' in something not a structure or union vo_ggi.c:261: request for member `driver' in something not a structure or union vo_ggi.c:266: request for member `bpp' in something not a structure or union vo_ggi.c:267: request for member `mode' in something not a structure or union vo_ggi.c:270: request for member `bpp' in something not a structure or union vo_ggi.c:271: request for member `mode' in something not a structure or union vo_ggi.c:274: request for member `bpp' in something not a structure or union vo_ggi.c:275: request for member `mode' in something not a structure or union vo_ggi.c:278: request for member `bpp' in something not a structure or union vo_ggi.c:279: request for member `mode' in something not a structure or union vo_ggi.c:282: request for member `bpp' in something not a structure or union vo_ggi.c:283: request for member `mode' in something not a structure or union vo_ggi.c:286: request for member `bpp' in something not a structure or union vo_ggi.c:287: request for member `mode' in something not a structure or union vo_ggi.c:290: request for member `bpp' in something not a structure or union vo_ggi.c:291: request for member `mode' in something not a structure or union vo_ggi.c:294: request for member `bpp' in something not a structure or union vo_ggi.c:295: request for member `mode' in something not a structure or union vo_ggi.c:298: request for member `bpp' in something not a structure or union vo_ggi.c:299: request for member `mode' in something not a structure or union vo_ggi.c:302: request for member `bpp' in something not a structure or union vo_ggi.c:303: request for member `mode' in something not a structure or union vo_ggi.c:308: request for member `bpp' in something not a structure or union vo_ggi.c:309: request for member `mode' in something not a structure or union vo_ggi.c:315: request for member `bpp' in something not a structure or union vo_ggi.c:316: request for member `mode' in something not a structure or union vo_ggi.c:327: request for member `format' in something not a structure or union vo_ggi.c:329: request for member `framePlaneRGB' in something not a structure or union vo_ggi.c:329: request for member `bpp' in something not a structure or union vo_ggi.c:330: request for member `stridePlaneRGB' in something not a structure or union vo_ggi.c:330: request for member `bpp' in something not a structure or union vo_ggi.c:339: request for member `width' in something not a structure or union vo_ggi.c:340: request for member `height' in something not a structure or union vo_ggi.c:341: request for member `dstwidth' in something not a structure or union vo_ggi.c:342: request for member `dstheight' in something not a structure or union vo_ggi.c:362: request for member `bpp' in something not a structure or union vo_ggi.c:363: request for member `format' in something not a structure or union vo_ggi.c:365: request for member `vis' in something not a structure or union vo_ggi.c:365: `GGIFLAG_ASYNC' undeclared (first use in this function) vo_ggi.c:365: (Each undeclared identifier is reported only once vo_ggi.c:365: for each function it appears in.) vo_ggi.c:367: request for member `buffer' in something not a structure or union vo_ggi.c:367: `ggi_directbuffer' undeclared (first use in this function) vo_ggi.c:367: parse error before `)' vo_ggi.c:369: request for member `buffer' in something not a structure or union vo_ggi.c:372: request for member `vis' in something not a structure or union vo_ggi.c:377: request for member `buffer' in something not a structure or union vo_ggi.c:377: `GGI_DB_SIMPLE_PLB' undeclared (first use in this function) vo_ggi.c:378: request for member `buffer' in something not a structure or union vo_ggi.c:379: request for member `buffer' in something not a structure or union vo_ggi.c:380: request for member `buffer' in something not a structure or union vo_ggi.c:381: request for member `buffer' in something not a structure or union vo_ggi.c:382: request for member `buffer' in something not a structure or union vo_ggi.c:382: `blPixelLinearBuffer' undeclared (first use in this function) vo_ggi.c:385: request for member `vis' in something not a structure or union ..... i didnt specify i had ggi ..well does to autodetect something i dont have? :) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From rpbrown at xtra.co.nz Wed Jul 18 15:22:44 2001 From: rpbrown at xtra.co.nz (mdew) Date: Thu, 19 Jul 2001 01:22:44 +1200 Subject: [Mplayer-users] skater_breaking_his_legs.mpeg Message-ID: <20010719012244.0a5ebab0.rpbrown@xtra.co.nz> mdew at storm:~/X_Men/Ouch$ mplayer -vo sdl skater_breaking_his_legs.mpeg MPlayer 0.17cvs-010719-00:37(C) 2000-2001 Arpad Gereoffy Reading /home/mdew/.mplayer/codecs.conf: 15 audio & 28 video codecs font: can't open file: /home/mdew/.mplayer/font/font.desc Not MPEG System Stream format... (maybe Transport Stream?) ============= Sorry, this file format not recognized/supported =============== === If this file is an AVI, ASF or MPEG stream, please contact the author! === check ya incoming dir :) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Wed Jul 18 15:28:33 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Wed, 18 Jul 2001 16:28:33 +0300 (EEST) Subject: [Mplayer-users] mplayer cvs compile error In-Reply-To: <20010719004312.3b74338d.rpbrown@xtra.co.nz> Message-ID: On Thu, 19 Jul 2001, mdew wrote: > i didnt specify i had ggi ..well does to autodetect something i dont have? :) i had the opposite problem with 0.18pre5 - just running configure && make produced a binary with only fbdev, png, null, odivx, pgm and md5 output drivers. when i forced it (--enable-blah) to build with xv, x11, dga and sdl it compiled fine and all of them work. interesting part was that the first time configure detected that i have all the dependencies (x11, sdl, etc). only the binary had no output drivers for them. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Wed Jul 18 17:30:16 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Wed, 18 Jul 2001 17:30:16 +0200 Subject: [Mplayer-users] Syncing MicroDVD subtitlesls Message-ID: <20010718173016.A31282@telia.com> Hi people, Is there an easier way to decide when the subtitle is to appear than -subdelay? Can't I specify the frame it should start in? For an example, my Swedish subtitle for American Psycho starts on frame 2787 which is way off. Or do I have to specify in seconds this delay? -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Wed Jul 18 18:11:36 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Wed, 18 Jul 2001 18:11:36 +0200 Subject: [Mplayer-users] Got -subdelay backwards? Message-ID: <20010718181135.A31597@telia.com> Hi again Isn't -subdelay messed up? In a movie the subtitle appeared 4 seconds too early which of course means I have to increase the delay before the subtitle is shown. But instead I have to specify -subdelay -4 in mplayer to have it sync. Have I not had enough sleep, or is this a bug? -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From luca at lucarella.com.ar Wed Jul 18 19:37:30 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Wed, 18 Jul 2001 14:37:30 -0300 (ART) Subject: [Mplayer-users] subtitles go unsyncronized in about an hour In-Reply-To: <20010718181135.A31597@telia.com> References: <20010718181135.A31597@telia.com> Message-ID: <200107181859.OAA29584@burns.luca.2y.net> Hi, I saw there are some questions/bugs about subtitles and it's my time to speak. I'm having some problems with the syncronization. The problem is that with a lot of filmes, the subtitles works just fine but when it played about and hour, the subtitles starts to go unsyncronized, if I'm not wrong, they appear later (I mean, first is the voice, then the subtitles). I have to put them back in sync with 'x' (or 'z') but the keep going slower and I must keep doing the 'x' press, about once every 5-10 minutes. Another problem is that some subtitles can't be speeded up or slowed down (with -subfps)., but I think this is a know problem... (It says something in the man pages about it). -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jkol5223 at menza.mff.cuni.cz Wed Jul 18 22:19:38 2001 From: jkol5223 at menza.mff.cuni.cz (Jindrich Kolorenc) Date: Wed, 18 Jul 2001 22:19:38 +0200 (CEST) Subject: [Mplayer-users] subtitles go unsyncronized in about an hour In-Reply-To: <200107181859.OAA29584@burns.luca.2y.net> Message-ID: On Wed, 18 Jul 2001, Leandro Lucarella wrote: > Hi, I saw there are some questions/bugs about subtitles and it's my time to > speak. I'm having some problems with the syncronization. The problem is > that with a lot of filmes, the subtitles works just fine but when it played > about and hour, the subtitles starts to go unsyncronized, if I'm not wrong, > they appear later (I mean, first is the voice, then the subtitles). I have > to put them back in sync with 'x' (or 'z') but the keep going slower and I > must keep doing the 'x' press, about once every 5-10 minutes. I reported the same problem about one month (maybe less) ago. Arpi replied something about possible rounding problem, but I have never heard it was fixed. Jindrich _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Wed Jul 18 20:59:51 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Wed, 18 Jul 2001 20:59:51 +0200 Subject: [Mplayer-users] Elementary streams (ES) References: <200107170927.LAA19568@thot.banki.hu> Message-ID: <001001c10fbb$d33cc240$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* Hi ... arpi ... i've tryed to watch the recorded video ... excellent work ... but there is sometime also the - like interlace - error ... is there already something to correct this ? if not do you use Windows? because i know some windows software for de-interlace (inkl. source-code) mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Wed Jul 18 21:18:44 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Wed, 18 Jul 2001 21:18:44 +0200 Subject: [Mplayer-users] Elementary streams (ES) In-Reply-To: <001001c10fbb$d33cc240$6400a8c0@p3> References: <200107170927.LAA19568@thot.banki.hu> <001001c10fbb$d33cc240$6400a8c0@p3> Message-ID: <3736274620.20010718211844@gmx.de> Hello Johannes, Wednesday, July 18, 2001, 8:59:51 PM, you wrote: > *This message was transferred with a trial version of CommuniGate(tm) Pro* > Hi ... arpi ... > i've tryed to watch the recorded video ... excellent work ... > but there is sometime also the - like interlace - error ... > is there already something to correct this ? video is decoded not deinterlaced, if you resise to half resolution you won't see interlacing. Do you see interlaced picture when you watch the clip under windooze? > if not do you use Windows? because i know some windows software for > de-interlace (inkl. source-code) > mfg Johannes -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Wed Jul 18 21:28:01 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Wed, 18 Jul 2001 21:28:01 +0200 Subject: [Mplayer-users] Elementary streams (ES) References: <200107170927.LAA19568@thot.banki.hu><001001c10fbb$d33cc240$6400a8c0@p3> <3736274620.20010718211844@gmx.de> Message-ID: <000701c10fbf$c26825a0$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* > Hello Johannes, > > Wednesday, July 18, 2001, 8:59:51 PM, you wrote: > > > *This message was transferred with a trial version of CommuniGate(tm) Pro* > > Hi ... arpi ... > > > i've tryed to watch the recorded video ... excellent work ... > > > but there is sometime also the - like interlace - error ... > > > is there already something to correct this ? > video is decoded not deinterlaced, if you resise to half resolution > you won't see interlacing. Do you see interlaced picture when you > watch the clip under windooze? windows suxx, we now, i have no software for watching (media player doesn't work) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Wed Jul 18 21:32:30 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Wed, 18 Jul 2001 21:32:30 +0200 Subject: [Mplayer-users] Elementary streams (ES) References: <200107170927.LAA19568@thot.banki.hu><001001c10fbb$d33cc240$6400a8c0@p3> <3736274620.20010718211844@gmx.de> Message-ID: <000501c10fc0$62ea1510$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* Now i've looked at the programm i'm using to convert this MPEG-PES to DIVX (dvd2avi) ... i tells me, it is interlaced !!! mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nb at jobtrak.com Wed Jul 18 21:42:18 2001 From: nb at jobtrak.com (Nathan Bradshaw) Date: Wed, 18 Jul 2001 12:42:18 -0700 Subject: [Mplayer-users] Networking with mplayer Message-ID: <20010718124218.Y4092@newt.jobtrak.com> > Message: 6187891 > FROM: Arpi > DATE: 07/16/2001 08:03:52 > SUBJECT: RE: [Mplayer-users] Networking with mplayer > > Hi, > >> I'm using mplayer very often in LAN to watch videos from another machines. >> If the file is on my machine, it goes OK, if it' is in the network, it >> stops for a half a sec, and not goes smoothly. I tried to use some cache >> but it doesn't help. Are you planning to write some buffer-tech for this >> reason? My card is only 10MBit/s but 1.2 Mbyte should be alright for even >> divx, not only for mpeg or anything like that. But sometime it slows down, >> so a cache would probably help. > > It's planned, read TODO or this maillist... > > currently as a workaround, you can use TOOLS/cache.c > not too perfect, but it worked for me playing divx from NFS-mounted disks, > over 10MBit net. > >> By the way, when do we get the GUI? :)) > > dunno. but it should be up at end of august... > > A'rpi / Astral & ESP-team Hi guys, How do you use TOOLS/cache.c? I compiled it but can't find any documentation. :-) I have a similar problem, but a little worse effect. Using an NFS-mount over 802.11 wireless network, I get around 600 Kbytes/sec pretty steady, no problems for my DivX-encoded DVDs. However, about every 5 minutes the 802.11 cards lose sync (or something!) with each other and take 5 seconds to resync. The movie is frozen during this time! No problem, I thought, I'll just use 'bfr' to buffer ahead a good 10 or 20Mb of RAM (the little linux book PC set-top box I use has 256Mb RAM), redirect bfr output to a named pipe and have mplayer read from that pipe. Well, mplayer hates that, it doesn't want to read from a 'stream', maybe it needs to seek within the file or something. But I am stuck now. Will the cache.c programbe able to help me? -Nathan _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 18 22:03:33 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 18 Jul 2001 22:03:33 +0200 (CEST) Subject: [Mplayer-users] subtitles go unsyncronized in about an hour In-Reply-To: <200107181859.OAA29584@burns.luca.2y.net> Message-ID: <200107182003.WAA32596@thot.banki.hu> Hi, > Hi, I saw there are some questions/bugs about subtitles and it's my time to > speak. I'm having some problems with the syncronization. The problem is > that with a lot of filmes, the subtitles works just fine but when it played > about and hour, the subtitles starts to go unsyncronized, if I'm not wrong, > they appear later (I mean, first is the voice, then the subtitles). I have > to put them back in sync with 'x' (or 'z') but the keep going slower and I > must keep doing the 'x' press, about once every 5-10 minutes. Hmm. Is it ok at the first hour? I think it's a math precision problem. I got similar thing with -bps option, until i changed float to double. I'll review subtitle code. > Another problem is that some subtitles can't be speeded up or slowed down > (with -subfps)., but I think this is a know problem... (It says something > in the man pages about it). Yes. -subfps is only for frame-based subtitles. It has no sense for time-based ones. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 18 22:07:19 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 18 Jul 2001 22:07:19 +0200 (CEST) Subject: [Mplayer-users] Elementary streams (ES) In-Reply-To: <001001c10fbb$d33cc240$6400a8c0@p3> Message-ID: <200107182007.WAA32548@thot.banki.hu> Hi, > *This message was transferred with a trial version of CommuniGate(tm) Pro* > Hi ... arpi ... > > i've tryed to watch the recorded video ... excellent work ... > > but there is sometime also the - like interlace - error ... > > is there already something to correct this ? Not yet. It's planned to libvo2, but there is no work in it yet :( It should be done by the hardware, at least if it supports deinterlacing. (for example. G400 supports it, with syncfb. i'll add this feature to mga_vid too) Doing it by software is too slow or bad quality. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 18 22:17:04 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 18 Jul 2001 22:17:04 +0200 (CEST) Subject: [Mplayer-users] Networking with mplayer In-Reply-To: <20010718124218.Y4092@newt.jobtrak.com> Message-ID: <200107182017.WAA46054@thot.banki.hu> Hi, > > It's planned, read TODO or this maillist... > > > > currently as a workaround, you can use TOOLS/cache.c > > not too perfect, but it worked for me playing divx from NFS-mounted disks, > > over 10MBit net. > > > How do you use TOOLS/cache.c? I compiled it but can't find any > documentation. :-) cat file.avi | cache | mpalyer - but it's very alpha code yet, and doesn't work too well... > No problem, I thought, I'll just use 'bfr' to buffer ahead a good 10 or > 20Mb of RAM (the little linux book PC set-top box I use has 256Mb RAM), > redirect bfr output to a named pipe and have mplayer read from that pipe. mplayer supports reading from stream (stdin). but it won't work with named pipe, because it thinks it's a file and tries to seek in it. use 'mplayer -' to read from stdin, and normal pipe ('|') no named one. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From luca at lucarella.com.ar Wed Jul 18 23:47:40 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Wed, 18 Jul 2001 18:47:40 -0300 (ART) Subject: [Mplayer-users] subtitles go unsyncronized in about an hour In-Reply-To: <200107182003.WAA32596@thot.banki.hu> References: <200107182003.WAA32596@thot.banki.hu> Message-ID: <200107182248.SAA30050@burns.luca.2y.net> El Wed, 18 Jul 2001 22:03:33 +0200 (CEST) Arpi escribi?: A> Hi, A> A> > Hi, I saw there are some questions/bugs about subtitles and it's my time to A> > speak. I'm having some problems with the syncronization. The problem is A> > that with a lot of filmes, the subtitles works just fine but when it played A> > about and hour, the subtitles starts to go unsyncronized, if I'm not wrong, A> > they appear later (I mean, first is the voice, then the subtitles). I have A> > to put them back in sync with 'x' (or 'z') but the keep going slower and I A> > must keep doing the 'x' press, about once every 5-10 minutes. A> Hmm. Is it ok at the first hour? A> I think it's a math precision problem. I got similar thing with -bps option, A> until i changed float to double. I'll review subtitle code. I use always -bps (don't remember why I add it to ~/.mplayer/config). If I use -ss 3600 (for start playing at the first hour) the subtitles works well, (for 5-10 minutes as when I play the complete movie) so is not a -subfps problem. A> > Another problem is that some subtitles can't be speeded up or slowed down A> > (with -subfps)., but I think this is a know problem... (It says something A> > in the man pages about it). A> Yes. -subfps is only for frame-based subtitles. It has no sense for A> time-based ones. I have some problems with some subtitles, they are time based and they're wrong. Is this possible? I got it from divxsubtitles.net, I don't think the subtitle is wrong... -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 19 00:53:54 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 19 Jul 2001 00:53:54 +0200 (CEST) Subject: [Mplayer-users] subtitles go unsyncronized in about an hour In-Reply-To: <200107182248.SAA30050@burns.luca.2y.net> Message-ID: <200107182253.AAA34728@thot.banki.hu> Hi, > A> > Hi, I saw there are some questions/bugs about subtitles and it's my time to > A> > speak. I'm having some problems with the syncronization. The problem is > A> > that with a lot of filmes, the subtitles works just fine but when it played > A> > about and hour, the subtitles starts to go unsyncronized, if I'm not wrong, > A> > they appear later (I mean, first is the voice, then the subtitles). I have > A> > to put them back in sync with 'x' (or 'z') but the keep going slower and I > A> > must keep doing the 'x' press, about once every 5-10 minutes. > A> Hmm. Is it ok at the first hour? > A> I think it's a math precision problem. I got similar thing with -bps option, > A> until i changed float to double. I'll review subtitle code. > > I use always -bps (don't remember why I add it to ~/.mplayer/config). If I > use -ss 3600 (for start playing at the first hour) the subtitles works > well, (for 5-10 minutes as when I play the complete movie) so is not a > -subfps problem. No, it is time counter problem. I saw (for -bps) that x+x+x+x+x differs _a_lot_ from 5*x, if i'm using float. (of course not 5, it's summed about 50000 times). I got near perfect result (no big difference between multiplied and summed) for a long period and at a given point the difference began to increasing. Maybe because of using gcc -mfast-math ? With double it's ok. > A> > Another problem is that some subtitles can't be speeded up or slowed down > A> > (with -subfps)., but I think this is a know problem... (It says something > A> > in the man pages about it). > A> Yes. -subfps is only for frame-based subtitles. It has no sense for > A> time-based ones. > > I have some problems with some subtitles, they are time based and they're > wrong. Is this possible? I got it from divxsubtitles.net, I don't think the > subtitle is wrong... Time is time, it is constant thing, except if you are time traveller :) Subtitles can be wrong, or (most possible) they are for different version of the movie. Usually multiple versions exists of a single movie over the net... screener, dvdrip etc grabs, and they can differ a lot. But you can't fix it with -subfps, even if it works... You should find different version of the .sub, or fix it manually. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From j.pepas at mail.utexas.edu Thu Jul 19 01:11:19 2001 From: j.pepas at mail.utexas.edu (jason pepas) Date: Wed, 18 Jul 2001 18:11:19 -0500 Subject: [Mplayer-users] vo_png.c problems? In-Reply-To: References: <20010717022810.6204d162.j.pepas@mail.utexas.edu> Message-ID: <20010718181119.7403fa47.j.pepas@mail.utexas.edu> Just wanted to thank you for your help. It took a few more steps, but I got it working. I have started writing up an (incomplete) tutorial for newbies to help them install mplayer on debian. http://jason.pepas.com/linux/tutorials/mplayer.php I figured you guys might throw this link to newbies who post to the list. Also, I have been working on a dvd playback script, and thought I would share it with you guys. Any feedback/commentary is of course welcome. (be warned though - I am pretty sure this script could open up some security risks, like running X as root, etc). usage: just log in as root at the console (without x running) and type 'dvd'. to jump to the next file just hit 'q'. file: dvd (goes in /sbin) #!/bin/sh mount /dev/hdb /cdrom DVD="mplayer -dvdauth /dev/hdb /cdrom/video_ts/vts_01_1.vob" xinit -g 102x39 -fn 10x20 -rv -e "playdvd" umount /cdrom file: playdvd (goes in /sbin) #!/bin/sh for i in `ls /cdrom/video_ts/*.vob` do mplayer -dvdauth /dev/hdb $i done On Tue, 17 Jul 2001 09:47:55 +0200 (CEST) Dariusz Pietrzak wrote: > > > I downloaded the source (Mplayer-0.17a-idegcounter) > you should try newer, preferably current cvs > > > and ran debuild on it. > read DOCS/DEBIAN for debian. > > > make spits out a ton of errors from vo_png.c (i can capture them if you > > like) > you're probably missing libpng2-dev package. > could you be more verbose in describing your problem? > > > -- > Dariusz Pietrzak > Excuse me, I'm cixelsyd today > _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From maxk at qualcomm.com Thu Jul 19 02:21:05 2001 From: maxk at qualcomm.com (Maksim Krasnyanskiy) Date: Wed, 18 Jul 2001 17:21:05 -0700 Subject: [Mplayer-users] [PATCH] Support for ARM platform and some Makefile improvements Message-ID: <4.3.1.0.20010718170835.0329d7b0@mail1> Hi Folks, Finally I was able to find some time to make a patch. Attached patch (against latest CVS) includes: New configure option '--target'. Cross-compilation should be ok now. ARM is now a supported platform. Minor Makefiles cleanups. Here is example, how to cross compile for iPAQ: ./configure --target=arm-linux --disable-css --with-x11libdir=/usr/arm/lib --with-x11incdir=/usr/arm/lib --disable-gcc-checking Max -------------- next part -------------- A non-text attachment was scrubbed... Name: mplayer_ipaq_patch.gz Type: application/octet-stream Size: 4204 bytes Desc: not available URL: -------------- next part -------------- Maksim Krasnyanskiy Senior Kernel Engineer Qualcomm Incorporated maxk at qualcomm.com http://bluez.sf.net http://vtun.sf.net From j at falooley.org Thu Jul 19 05:11:03 2001 From: j at falooley.org (Jason Lunz) Date: Wed, 18 Jul 2001 23:11:03 -0400 Subject: [Mplayer-users] broken movie? Message-ID: arpi at thot.banki.hu said: > yes, please upload these files to > ftp://mplayer.dev.hu/MPlayer/incoming/ I'll check them and fix > mplayer. MPlayer shouldn't stop/crash/etc with broken files. while you're looking at broken .asf files, the simpsons "lemon of troy" episode i'm uploading now does some weird things with tonight's cvs mplayer. thanks, jason _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Thu Jul 19 07:30:21 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Thu, 19 Jul 2001 08:30:21 +0300 (EEST) Subject: [Mplayer-users] subtitles go unsyncronized in about an hour In-Reply-To: <200107182248.SAA30050@burns.luca.2y.net> Message-ID: > I use always -bps (don't remember why I add it to ~/.mplayer/config). If I > use -ss 3600 (for start playing at the first hour) the subtitles works > well, (for 5-10 minutes as when I play the complete movie) so is not a > -subfps problem. here's an undocumented (i think) feature (at least not in the man): -ss 1:00:00 :)) the manpage really says '-ss second - seek to second position' :) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Thu Jul 19 07:37:47 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Thu, 19 Jul 2001 08:37:47 +0300 (EEST) Subject: [Mplayer-users] broken movie? In-Reply-To: <200107180853.KAA42184@thot.banki.hu> Message-ID: > yes, please upload these files to ftp://mplayer.dev.hu/MPlayer/incoming/ > I'll check them and fix mplayer. MPlayer shouldn't stop/crash/etc with > broken files. you've got the broken asf (Willow.asf). _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From luca at lucarella.com.ar Thu Jul 19 07:33:28 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Thu, 19 Jul 2001 02:33:28 -0300 (ART) Subject: [Mplayer-users] subtitles go unsyncronized in about an hour In-Reply-To: <200107182253.AAA34728@thot.banki.hu> References: <200107182253.AAA34728@thot.banki.hu> Message-ID: <200107190634.CAA30583@burns.luca.2y.net> El Thu, 19 Jul 2001 00:53:54 +0200 (CEST) Arpi escribi?: A> > I use always -bps (don't remember why I add it to ~/.mplayer/config). If I A> > use -ss 3600 (for start playing at the first hour) the subtitles works A> > well, (for 5-10 minutes as when I play the complete movie) so is not a A> > -subfps problem. A> No, it is time counter problem. A> I saw (for -bps) that x+x+x+x+x differs _a_lot_ from 5*x, if i'm using A> float. (of course not 5, it's summed about 50000 times). A> I got near perfect result (no big difference between multiplied and summed) A> for a long period and at a given point the difference began to increasing. A> Maybe because of using gcc -mfast-math ? With double it's ok. So you'll change it to float? It's fixed now? or not yet? A> > I have some problems with some subtitles, they are time based and they're A> > wrong. Is this possible? I got it from divxsubtitles.net, I don't think the A> > subtitle is wrong... A> Time is time, it is constant thing, except if you are time traveller :) A> Subtitles can be wrong, or (most possible) they are for different version of A> the movie. Usually multiple versions exists of a single movie over the A> net... screener, dvdrip etc grabs, and they can differ a lot. A> But you can't fix it with -subfps, even if it works... A> You should find different version of the .sub, or fix it manually. Mmmm, nasty! I thought movies are movies... (execpt for Starwars that have 2 versions... ;) -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Thu Jul 19 07:40:05 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Thu, 19 Jul 2001 07:40:05 +0200 Subject: [Mplayer-users] subtitles go unsyncronized in about an hour In-Reply-To: References: Message-ID: <20010719074005.A3016@telia.com> lanzz at lanzz.org wrote: > here's an undocumented (i think) feature (at least not in the man): mplayer -h shows this: -ss seek to given (seconds or hh:mm:ss) position -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Thu Jul 19 07:51:36 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Thu, 19 Jul 2001 08:51:36 +0300 (EEST) Subject: [Mplayer-users] subtitles go unsyncronized in about an hour In-Reply-To: <20010719074005.A3016@telia.com> Message-ID: On Thu, 19 Jul 2001, [iso-8859-1] Andr? Dahlqvist wrote: > mplayer -h shows this: > > -ss seek to given (seconds or hh:mm:ss) position silly me :) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From luca at lucarella.com.ar Thu Jul 19 07:45:35 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Thu, 19 Jul 2001 02:45:35 -0300 (ART) Subject: [Mplayer-users] subtitles go unsyncronized in about an hour In-Reply-To: References: Message-ID: <200107190646.CAA30593@burns.luca.2y.net> El Thu, 19 Jul 2001 08:30:21 +0300 (EEST) lanzz at lanzz.org escribi?: > > I use always -bps (don't remember why I add it to ~/.mplayer/config). If I > > use -ss 3600 (for start playing at the first hour) the subtitles works > > well, (for 5-10 minutes as when I play the complete movie) so is not a > > -subfps problem. > > here's an undocumented (i think) feature (at least not in the man): > > -ss 1:00:00 > > :)) the manpage really says '-ss second - seek to second position' :) Nice tip!!! Much better! -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Thu Jul 19 08:43:26 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Thu, 19 Jul 2001 08:43:26 +0200 Subject: [Mplayer-users] vo_png.c problems? In-Reply-To: <20010718181119.7403fa47.j.pepas@mail.utexas.edu> References: <20010717022810.6204d162.j.pepas@mail.utexas.edu> <20010718181119.7403fa47.j.pepas@mail.utexas.edu> Message-ID: <01071908432601.00511@astral> On Thursday, 19. July 2001 01:11, you wrote: > Just wanted to thank you for your help. It took a few more steps, but I > got it working. > > I have started writing up an (incomplete) tutorial for newbies to help them > install mplayer on debian. > http://jason.pepas.com/linux/tutorials/mplayer.php > I figured you guys might throw this link to newbies who post to the list. > > Also, I have been working on a dvd playback script, and thought I would > share it with you guys. Any feedback/commentary is of course welcome. (be > warned though - I am pretty sure this script could open up some security > risks, like running X as root, etc). > > usage: > just log in as root at the console (without x running) and type 'dvd'. > to jump to the next file just hit 'q'. > > > file: dvd (goes in /sbin) > #!/bin/sh > mount /dev/hdb /cdrom > DVD="mplayer -dvdauth /dev/hdb /cdrom/video_ts/vts_01_1.vob" > xinit -g 102x39 -fn 10x20 -rv -e "playdvd" > umount /cdrom > > > file: playdvd (goes in /sbin) > #!/bin/sh > for i in `ls /cdrom/video_ts/*.vob` > do > mplayer -dvdauth /dev/hdb $i > done > it's not very usefull, first it should use /dev/dvd insetad of /dev/hdb second it'll play all vobs on dvd, but usually you only want to play one series of vobs, ie. the ones of the main movie or of a trailer. [snip] -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Thu Jul 19 13:21:03 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Thu, 19 Jul 2001 11:21:03 +0000 (:) Subject: [Mplayer-users] [PATCH] Support for ARM platform and some Makefile improvements In-Reply-To: <4.3.1.0.20010718170835.0329d7b0@mail1> Message-ID: Hi, Maksim Krasnyanskiy! On 2001-07-18 17:21:05 you wrote: >Hi Folks, > >Finally I was able to find some time to make a patch. >Attached patch (against latest CVS) includes: > New configure option '--target'. Cross-compilation should be ok now. > ARM is now a supported platform. > Minor Makefiles cleanups. > >Here is example, how to cross compile for iPAQ: > ./configure --target=arm-linux --disable-css --with-x11libdir=/usr/arm/lib --with-x11incdir=/usr/arm/lib --disable-gcc-checking > >Max Your patch is not applicable there are too many rejected hunks. Contact with Arpi about or if it's possible - break your patch on parts if it's not whole transaction. Best regards! Nick (2001-07-19 11:19:03) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From hh at holtschneider.com Thu Jul 19 09:25:05 2001 From: hh at holtschneider.com (Henning Holtschneider) Date: Thu, 19 Jul 2001 09:25:05 +0200 (CEST) Subject: [Mplayer-users] Elementary streams (ES) In-Reply-To: <000501c10fc0$62ea1510$6400a8c0@p3> References: <000501c10fc0$62ea1510$6400a8c0@p3> Message-ID: <1126.212.28.232.37.995527505.squirrel@grobi.holtschneider.com> > Pro* Now i've looked at the programm i'm using to convert this MPEG-PES > to DIVX (dvd2avi) ... > > i tells me, it is interlaced !!! dvd2avi is not always right. Most of the time, dvd2avi will say the stream is interlaced even if it's progressive. BTW, there is a better way to watch the DVB recordings with Media Player. Remultiplex the files with PVAStrumento (http://www.offeryn.de/dv.htm) and get an MPEG-2 DirectShow plugin for Media Player (Elecard MPEG player works fine; http://www.elecard.com). If you have more questions concerning this, contact me directly. I'm not sure if the list is interested in all this ;-) Regards, hh _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From hh at holtschneider.com Thu Jul 19 09:29:28 2001 From: hh at holtschneider.com (Henning Holtschneider) Date: Thu, 19 Jul 2001 09:29:28 +0200 (CEST) Subject: [Mplayer-users] support for TV-out of Matrox G450? Message-ID: <1143.212.28.232.37.995527768.squirrel@grobi.holtschneider.com> Hi, I'm about to buy a Matrox G450 VGA card so that I can watch movies on my (PAL) TV using MPlayer. I read http://mp.dev.hu/MPlayer/DOCS/TVout-G400 but I'm not sure if the method described there applies to the G450, too? There also seem to be several versions of the G450, which one do I need? Is anyone successfully using a Matrox G450 on a PAL-TV? Thanks for your help hh _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From sr at particle.uni-karlsruhe.de Thu Jul 19 09:38:48 2001 From: sr at particle.uni-karlsruhe.de (Stefan Recksiegel) Date: Thu, 19 Jul 2001 09:38:48 +0200 (MET DST) Subject: [Mplayer-users] support for TV-out of Matrox G450? In-Reply-To: <1143.212.28.232.37.995527768.squirrel@grobi.holtschneider.com> from Henning Holtschneider at "Jul 19, 2001 09:29:28 am" Message-ID: <20010719073848.30317.qmail@particle.uni-karlsruhe.de> Hi, > also seem to be several versions of the G450, which one do I need? Is > anyone successfully using a Matrox G450 on a PAL-TV? I can recommend the Savage4 with TVout very much. It is cheap and the driver supports xv. I have an old computer that I use as server for various things standing next to my TV (no normal monitor at all), and I also use this computer to watch movies with mplayer on my TV. (Since I live in Japan these days I use NTSC, but there is a tool on the driver's website that is supposed to allow you to switch the card to PAL under linux.) Stefan ********************************************************** * Stefan Recksiegel stefan at recksiegel.de * * B 201, Estate Pia Tel. +8190-2423-6753 * * Kaname 427-5 Fax. +4969-791265045 * * Tsukuba, Ibaraki 300-2622, Japan * ********************************************************** _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Thu Jul 19 14:26:49 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Thu, 19 Jul 2001 12:26:49 +0000 (:) Subject: [Mplayer-users] support for TV-out of Matrox G450? Message-ID: Hi! On 2001-07-19 09:38:48 Stefan Recksiegel wrote: >Hi, > >> also seem to be several versions of the G450, which one do I need? Is >> anyone successfully using a Matrox G450 on a PAL-TV? > >I can recommend the Savage4 with TVout very much. It is cheap and >the driver supports xv. I have an old computer that I use as server >for various things standing next to my TV (no normal monitor at all), >and I also use this computer to watch movies with mplayer on my TV. > >(Since I live in Japan these days I use NTSC, but there is a tool >on the driver's website that is supposed to allow you to switch >the card to PAL under linux.) > Savage4 with TVout is rarity - finely I never saw such chip in Russian shops. But for several reasons I've pay money for ATI Radeon VE with S-Video out and probably soon I will have it. Incidental question: does someone have such chip? Best regards! Nick (2001-07-19 12:20:24) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 19 11:06:18 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 19 Jul 2001 11:06:18 +0200 (CEST) Subject: [Mplayer-users] subtitles go unsyncronized in about an hour In-Reply-To: <200107190634.CAA30583@burns.luca.2y.net> Message-ID: <200107190906.LAA30008@thot.banki.hu> Hi, > A> > I use always -bps (don't remember why I add it to ~/.mplayer/config). If I > A> > use -ss 3600 (for start playing at the first hour) the subtitles works > A> > well, (for 5-10 minutes as when I play the complete movie) so is not a > A> > -subfps problem. > A> No, it is time counter problem. > A> I saw (for -bps) that x+x+x+x+x differs _a_lot_ from 5*x, if i'm using > A> float. (of course not 5, it's summed about 50000 times). > A> I got near perfect result (no big difference between multiplied and summed) > A> for a long period and at a given point the difference began to increasing. > A> Maybe because of using gcc -mfast-math ? With double it's ok. > > So you'll change it to float? It's fixed now? or not yet? They are floats now. They will be changed to fixed or double. Floats sux. :( > A> > I have some problems with some subtitles, they are time based and they're > A> > wrong. Is this possible? I got it from divxsubtitles.net, I don't think the > A> > subtitle is wrong... > A> Time is time, it is constant thing, except if you are time traveller :) > A> Subtitles can be wrong, or (most possible) they are for different version of > A> the movie. Usually multiple versions exists of a single movie over the > A> net... screener, dvdrip etc grabs, and they can differ a lot. > A> But you can't fix it with -subfps, even if it works... > A> You should find different version of the .sub, or fix it manually. > > Mmmm, nasty! I thought movies are movies... (execpt for Starwars that have > 2 versions... ;) I have 3 versions of Joan of Arc, and 2 of Gladiator. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 19 11:14:24 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 19 Jul 2001 11:14:24 +0200 (CEST) Subject: [Mplayer-users] support for TV-out of Matrox G450? In-Reply-To: <1143.212.28.232.37.995527768.squirrel@grobi.holtschneider.com> Message-ID: <200107190914.LAA33990@thot.banki.hu> Hi, > I'm about to buy a Matrox G450 VGA card so that I can watch movies on my > (PAL) TV using MPlayer. I read http://mp.dev.hu/MPlayer/DOCS/TVout-G400 but > I'm not sure if the method described there applies to the G450, too? There > also seem to be several versions of the G450, which one do I need? Is > anyone successfully using a Matrox G450 on a PAL-TV? > this mail should be sent to mplayer-matrox... btw i must say: there is NO TV-out support for G450 under linux yet. :( (and AFAIK it is not planned...) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From robert-j at gmx.de Thu Jul 19 11:36:03 2001 From: robert-j at gmx.de (=?iso-8859-1?Q?Robert_J=E4schke?=) Date: Thu, 19 Jul 2001 11:36:03 +0200 Subject: [Mplayer-users] wrong aspect of DVD-Video Message-ID: <20010719113603.A24164@oberon.wh4.tu-dresden.de> Hello! I have got a problem with playing a video from DVD. It's always played with the wrong aspect ratio: VO: [xv] 720x576 => 720x576 Planar YV12 (My screen resolution is 1024x768) The persons look very strange this way because they're stretched. If I start MPlayer with the option "-x 900" it looks much better. The problem is: this doesn't work in fullscreen mode! So my question is: is it possible to watch this video with the right aspect ratio in fullscreen mode? Or is it even possible to autodetect the right aspect ratio of the video? Robert _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From data at polinux2.eui.upv.es Thu Jul 19 11:51:22 2001 From: data at polinux2.eui.upv.es (data at polinux2.eui.upv.es) Date: Thu, 19 Jul 2001 11:51:22 +0200 Subject: [Mplayer-users] wrong aspect of DVD-Video In-Reply-To: <20010719113603.A24164@oberon.wh4.tu-dresden.de> References: <20010719113603.A24164@oberon.wh4.tu-dresden.de> Message-ID: <20010719115122.A11596@polinux2.eui.upv.es> On Thu, Jul 19, 2001 at 11:36:03AM +0200, Robert J?schke wrote: > > Hello! > > I have got a problem with playing a video from DVD. It's always played with > the wrong aspect ratio: > > The persons look very strange this way because they're stretched. If I start > MPlayer with the option "-x 900" it looks much better. The problem is: this > doesn't work in fullscreen mode! So my question is: is it possible to watch > this video with the right aspect ratio in fullscreen mode? Or is it even > possible to autodetect the right aspect ratio of the video? I bet the solution here would be to add some black stuff in the right place up and down, so the aspect of the movie keeps right. The only problem is that I am not a coder myself, I am just a mere reader of this list, since I enjoy a lot reading about the progress of mplayer. I suppose Nick or Arpi might help you. Jesse. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Thu Jul 19 14:15:58 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Thu, 19 Jul 2001 14:15:58 +0200 Subject: [Mplayer-users] subtitles go unsyncronized in about an hour In-Reply-To: <200107190906.LAA30008@thot.banki.hu> References: <200107190906.LAA30008@thot.banki.hu> Message-ID: <01071914155803.00511@astral> On Thursday, 19. July 2001 11:06, you wrote: > Hi, > > > > > Mmmm, nasty! I thought movies are movies... (execpt for Starwars that > > have 2 versions... ;) > > I have 3 versions of Joan of Arc, and 2 of Gladiator. isn't that supposed to be Jeanne d'Arc (btw. great movie)? > > > A'rpi / Astral & ESP-team > -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Thu Jul 19 14:12:30 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Thu, 19 Jul 2001 14:12:30 +0200 Subject: [Mplayer-users] wrong aspect of DVD-Video In-Reply-To: <20010719113603.A24164@oberon.wh4.tu-dresden.de> References: <20010719113603.A24164@oberon.wh4.tu-dresden.de> Message-ID: <01071914123002.00511@astral> On Thursday, 19. July 2001 11:36, you wrote: > Hello! > > I have got a problem with playing a video from DVD. It's always played with > the wrong aspect ratio: > > VO: [xv] 720x576 => 720x576 Planar YV12 > > (My screen resolution is 1024x768) > > The persons look very strange this way because they're stretched. If I > start MPlayer with the option "-x 900" it looks much better. The problem > is: this doesn't work in fullscreen mode! So my question is: is it possible > to watch this video with the right aspect ratio in fullscreen mode? Or is > it even possible to autodetect the right aspect ratio of the video? > it doesn't work because of an annormality of the -fs switch (it overrides -x and -y value with current screen resolution), so use -x 900 and -zoom or -vm (at least sdl out should handle that). > > Robert > -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 19 14:33:50 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 19 Jul 2001 14:33:50 +0200 (CEST) Subject: [Mplayer-users] subtitles go unsyncronized in about an hour In-Reply-To: <01071914155803.00511@astral> Message-ID: <200107191233.OAA32190@thot.banki.hu> Hi, > > > Mmmm, nasty! I thought movies are movies... (execpt for Starwars that > > > have 2 versions... ;) > > > > I have 3 versions of Joan of Arc, and 2 of Gladiator. > isn't that supposed to be Jeanne d'Arc (btw. great movie)? yes, it is. Joan of Arc sis teh english version title, Jeanne d'Arc is the original french. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From tibcu at sch.bme.hu Thu Jul 19 17:19:17 2001 From: tibcu at sch.bme.hu (Balazs Tibor) Date: Thu, 19 Jul 2001 17:19:17 +0200 (MEST) Subject: [Mplayer-users] subtitles go unsyncronized in about an hour In-Reply-To: <200107190634.CAA30583@burns.luca.2y.net> Message-ID: > Mmmm, nasty! I thought movies are movies... (execpt for Starwars that have > 2 versions... ;) And Pearl Harbor (Japanese version differs from the US one) Tibcu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Thu Jul 19 17:43:25 2001 From: jaf.corporation at gmx.at (JAF) Date: Thu, 19 Jul 2001 17:43:25 +0200 Subject: [Mplayer-users] subtitles go unsyncronized in about an hour In-Reply-To: Message-ID: > > Mmmm, nasty! I thought movies are movies... (execpt for > Starwars that have > > 2 versions... ;) > > And Pearl Harbor (Japanese version differs from the US > one) Well .. there are most about 3-5 versions becouse of the country-codes ... mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From maxk at qualcomm.com Thu Jul 19 18:59:32 2001 From: maxk at qualcomm.com (Maksim Krasnyanskiy) Date: Thu, 19 Jul 2001 09:59:32 -0700 Subject: [Mplayer-users] [PATCH] Support for ARM platform and some Makefile improvements In-Reply-To: References: <4.3.1.0.20010718170835.0329d7b0@mail1> Message-ID: <4.3.1.0.20010719095354.033bcaa0@mail1> >Your patch is not applicable there are too many rejected hunks. >Contact with Arpi about or if it's possible - break your patch on parts if it's >not whole transaction. Hold on. It applies cleanly to the current CVS. I did fresh check out of HEAD branch from CVS (yesterday). Hacked it. Then did cvs -d... diff -u. And then did one more check out and applied patch, to make sure that everything is clean. So, either you have too many uncommitted changes or I'm using wrong CVS :) Is pserver:anonymous at mp.dev.hu:/cvsroot/mplayer correct CVS tree ? Max Maksim Krasnyanskiy Senior Kernel Engineer Qualcomm Incorporated maxk at qualcomm.com http://bluez.sf.net http://vtun.sf.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Thu Jul 19 20:31:56 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Thu, 19 Jul 2001 20:31:56 +0200 Subject: [Mplayer-users] Problem with AVI without Sound References: <200107182007.WAA32548@thot.banki.hu> Message-ID: <001801c11081$16f81ff0$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* Hi ... i'm now some AVI files, with which i've problems: mplayer says: VIDEO: [] 224x163 8bpp 25.00 fps 73.6 kbps ( 9.0 kbyte/s) [V] filefmt:3 fourcc:0x1 size:224x163 fps:25.00 ftime:=0.0400 can't find codec for video format 0x1 ! i've looked at it under windows, it tells me the format is "MS-RLE" the windows tool avic (for showing the fourcc) tells me the "FourCC Description Code" is "mrle" and the "FourCC Used Codec" is "" ... And the Programm "nandub" tells me, it's Uncompressed RGB8 ... mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 19 20:47:16 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 19 Jul 2001 20:47:16 +0200 (CEST) Subject: [Mplayer-users] Problem with AVI without Sound In-Reply-To: <001801c11081$16f81ff0$6400a8c0@p3> Message-ID: <200107191847.UAA35200@thot.banki.hu> Hi, > i'm now some AVI files, with which i've problems: > > mplayer says: > > VIDEO: [] 224x163 8bpp 25.00 fps 73.6 kbps ( 9.0 kbyte/s) > [V] filefmt:3 fourcc:0x1 size:224x163 fps:25.00 ftime:=0.0400 > can't find codec for video format 0x1 ! This format is not supported, and it is not planned to be in the future. This is very old, and nobody uses it. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Thu Jul 19 20:58:51 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Thu, 19 Jul 2001 20:58:51 +0200 Subject: [Mplayer-users] Problem with AVI without Sound References: <200107191847.UAA35200@thot.banki.hu> Message-ID: <000701c11084$da00fd70$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* > Hi, > > > i'm now some AVI files, with which i've problems: > > > > mplayer says: > > > > VIDEO: [] 224x163 8bpp 25.00 fps 73.6 kbps ( 9.0 kbyte/s) > > [V] filefmt:3 fourcc:0x1 size:224x163 fps:25.00 ftime:=0.0400 > > can't find codec for video format 0x1 ! > > This format is not supported, and it is not planned to be in the future. > This is very old, and nobody uses it. well .. but i believe it is not hard to support ? isn't it ??? mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 19 21:00:44 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 19 Jul 2001 21:00:44 +0200 (CEST) Subject: [Mplayer-users] Problem with AVI without Sound In-Reply-To: <000701c11084$da00fd70$6400a8c0@p3> Message-ID: <200107191900.VAA35152@thot.banki.hu> Hi, > > > VIDEO: [] 224x163 8bpp 25.00 fps 73.6 kbps ( 9.0 kbyte/s) > > > [V] filefmt:3 fourcc:0x1 size:224x163 fps:25.00 ftime:=0.0400 > > > can't find codec for video format 0x1 ! > > > > This format is not supported, and it is not planned to be in the future. > > This is very old, and nobody uses it. > > well .. but i believe it is not hard to support ? isn't it ??? It is hard. we has no working codec for MS-RLE. and about uncompressed: we don't have (yet) rgb conversion routines. yes, they can be implemented, but who needs it? it doesn't worth... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Thu Jul 19 21:22:05 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Thu, 19 Jul 2001 21:22:05 +0200 Subject: [Mplayer-users] Problem with AVI without Sound In-Reply-To: <000701c11084$da00fd70$6400a8c0@p3>; from jaf.corporation@gmx.at on Thu, Jul 19, 2001 at 08:58:51PM +0200 References: <200107191847.UAA35200@thot.banki.hu> <000701c11084$da00fd70$6400a8c0@p3> Message-ID: <20010719212205.A4386@woodstock.localdomain> It's the Question that drives us, Johannes Feigl : > > This format is not supported, and it is not planned to be in the future. > > This is very old, and nobody uses it. > well .. but i believe it is not hard to support ? isn't it ??? Try it according to DOCS/CODECS . -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From jaf.corporation at gmx.at Thu Jul 19 21:32:24 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Thu, 19 Jul 2001 21:32:24 +0200 Subject: [Mplayer-users] Problem with AVI without Sound References: <200107191847.UAA35200@thot.banki.hu> <000701c11084$da00fd70$6400a8c0@p3> <20010719212205.A4386@woodstock.localdomain> Message-ID: <000b01c11089$89c09c30$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* Well ... Gabucino i've translated this to german ... have you forgotten / don't you know ;-) but mplayer is not telling somethink link in DOCS/CODECS... mfg Johannes It's the Question that drives us, Johannes Feigl : > > This format is not supported, and it is not planned to be in the future. > > This is very old, and nobody uses it. > well .. but i believe it is not hard to support ? isn't it ??? Try it according to DOCS/CODECS . -- Gabucino _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Thu Jul 19 21:35:28 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Thu, 19 Jul 2001 21:35:28 +0200 Subject: [Mplayer-users] Problem with AVI without Sound References: <200107191900.VAA35152@thot.banki.hu> Message-ID: <000601c11089$f76a7e40$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* well .. i will try with msrle32.dll maybe it works ... mfg Johannes ----- Original Message ----- From: "Arpi" To: Sent: Thursday, July 19, 2001 9:00 PM Subject: Re: Re: [Mplayer-users] Problem with AVI without Sound > *This message was transferred with a trial version of CommuniGate(tm) Pro* > Hi, > > > > > VIDEO: [] 224x163 8bpp 25.00 fps 73.6 kbps ( 9.0 kbyte/s) > > > > [V] filefmt:3 fourcc:0x1 size:224x163 fps:25.00 ftime:=0.0400 > > > > can't find codec for video format 0x1 ! > > > > > > This format is not supported, and it is not planned to be in the future. > > > This is very old, and nobody uses it. > > > > well .. but i believe it is not hard to support ? isn't it ??? > It is hard. > we has no working codec for MS-RLE. > and about uncompressed: we don't have (yet) rgb conversion routines. > yes, they can be implemented, but who needs it? it doesn't worth... > > > A'rpi / Astral & ESP-team > > -- > mailto:arpi at thot.banki.hu > http://esp-team.scene.hu > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 19 21:50:30 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 19 Jul 2001 21:50:30 +0200 (CEST) Subject: [Mplayer-users] Problem with AVI without Sound In-Reply-To: <000b01c11089$89c09c30$6400a8c0@p3> Message-ID: <200107191950.VAA37724@thot.banki.hu> Hi, > > i've translated this to german ... have you forgotten / don't you know ;-) btw. there are only a few (4) short files in DOCS/German... What about the others? At least README and INSTALL should be translated. and maybe VIDEOCARDS and SOUNDCARDS and CDROM and DVD* too... :) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 19 21:47:54 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 19 Jul 2001 21:47:54 +0200 (CEST) Subject: [Mplayer-users] Problem with AVI without Sound In-Reply-To: <000b01c11089$89c09c30$6400a8c0@p3> Message-ID: <200107191947.VAA34718@thot.banki.hu> Hi, > *This message was transferred with a trial version of CommuniGate(tm) Pro* > Well ... Gabucino > > i've translated this to german ... have you forgotten / don't you know ;-) > > but mplayer is not telling somethink link in DOCS/CODECS... why? it's about win32 codecs. you can find & try proper msrle codec DLL using tipps in DOCS/CODECS :) (but i tried it once, and didn't work...) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Thu Jul 19 22:03:50 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Thu, 19 Jul 2001 22:03:50 +0200 Subject: [Mplayer-users] Problem with AVI without Sound References: <200107191950.VAA37724@thot.banki.hu> Message-ID: <000701c1108d$edd97850$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* well arpi ... i'm translating ... ;-) i've already send the next 5 files to felix, he look at the files and uploads it .. but he hat no time yet ... and i would have a lot of time, because i travel 2 hours every day by train, but - as I told you - my notebook is defect ... I hope I will get it back this or next week .. mfg Johannes ----- Original Message ----- From: "Arpi" To: Sent: Thursday, July 19, 2001 9:50 PM Subject: Re: Re: [Mplayer-users] Problem with AVI without Sound > *This message was transferred with a trial version of CommuniGate(tm) Pro* > Hi, > > > > > i've translated this to german ... have you forgotten / don't you know ;-) > > btw. there are only a few (4) short files in DOCS/German... > What about the others? At least README and INSTALL should be translated. > and maybe VIDEOCARDS and SOUNDCARDS and CDROM and DVD* too... :) > > > A'rpi / Astral & ESP-team > > -- > mailto:arpi at thot.banki.hu > http://esp-team.scene.hu > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From data at polinux2.eui.upv.es Thu Jul 19 23:47:54 2001 From: data at polinux2.eui.upv.es (data at polinux2.eui.upv.es) Date: Thu, 19 Jul 2001 23:47:54 +0200 Subject: [UPDATED GCC TO VERSION 3.0] [Mplayer-users] BUG in last CVS checkout... Message-ID: <20010719234754.A16089@polinux2.eui.upv.es> ----- Forwarded message from data at polinux2.eui.upv.es ----- Delivered-To: data at polinux.upv.es From: data at polinux2.eui.upv.es To: mplayer-users at lists.sourceforge.net User-Agent: Mutt/1.3.19i Subject: [Mplayer-users] BUG in last CVS checkout... Errors-To: mplayer-users-admin at lists.sourceforge.net X-BeenThere: mplayer-users at lists.sourceforge.net X-Mailman-Version: 2.0.5 Precedence: bulk Reply-To: mplayer-users at lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Id: List-Unsubscribe: , List-Archive: Date: Tue, 17 Jul 2001 21:44:13 +0200 After updating the gcc to 3.0: [root at nostromo main]$ gcc -v Reading specs from /usr/lib/gcc-lib/i586-mandrake-linux/3.0/specs Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --disable-checking --enable-long-long --enable-cstdio=stdio --enable-clocale=generic --enable-languages=c,c++,f77,objc,java --program-suffix=-3.0 --enable-objc-gc --host=i586-mandrake-linux Thread model: posix gcc version 3.0 The error I get is: dsputil.c: In function `put_pixels': i386/dsputil_mmx.c:151: Can't find a register in class `GENERAL_REGS' while reloading `asm'. dsputil.c: In function `put_pixels_x2': i386/dsputil_mmx.c:199: Can't find a register in class `GENERAL_REGS' while reloading `asm'. dsputil.c: In function `avg_pixels': i386/dsputil_mmx.c:534: Can't find a register in class `GENERAL_REGS' while reloading `asm'. make[1]: *** [dsputil.o] Error 1 make[1]: Leaving directory `/root/video/main/libavcodec' make: *** [libavcodec/libavcodec.a] Error 2 I know it says I should not send a bug but... Distro: Mandrake 8.0 kernel: 2.4.6-ac2 libc: 2.2.2 X: 4.1.0-mdk4 ld: GNU ld version 2.10.91 (with BFD 2.10.1.0.2) as: GNU assembler 2.10.91 model name : AMD-K6(tm) 3D processor stepping : 12 cpu MHz : 501.148 Matrox G450 16 RAM Checking assembler (as) ... 2.10.91, ok Checking Linux kernel version ... 2.4.6-ac2, ok Install prefix: /usr/local Checking for cpu vendor ... AuthenticAMD ( 5:8:12 ) Checking for cpu type ... AMD-K6(tm) 3D processor Optimizing to ... k6 Checking for mmx support ... yes Checking for mmx2 support ... no Checking for 3dnow support ... yes Checking for 3dnowex support ... no Checking for sse support ... no Checking for mtrr support ... yes Screen size ... 1x1 Checking for X11 libs ... -L/usr/X11R6/lib Checking for X11 headers ... Checking mga_vid device ... yes Checking for xmga ... yes Checking for SDL ... yes Checking for GGI ... no Checking for OpenGL ... yes Checking for Xv ... yes Checking for X11 ... yes Checking for DGA ... yes Checking for DGA 2.0 .. yes Checking for Xf86VM ... yes Checking for SVGAlib ... no Checking for FBDev ... yes Checking for OSS Audio ... yes Checking for ALSA Audio ... no Checking for ESD Audio ... yes Checking for Sun Audio ... no Checking for DeCSS support ... yes Checking for PNG support ... yes Checking for DirectShow ... yes Checking for libavcodec ... yes Checking for fastmemcpy ... yes Extra libs : -L/usr/local/lib Extra headers : -I/usr/local/include Creating config.h It has been working for a while. After today's checkout I got this: dsputil.c: In function `put_pixels': i386/dsputil_mmx.c:130: Can't find a register in class `GENERAL_REGS' while reloading `asm'. dsputil.c: In function `put_pixels_x2': i386/dsputil_mmx.c:186: Can't find a register in class `GENERAL_REGS' while reloading `asm'. make[1]: *** [dsputil.o] Error 1 make[1]: Leaving directory `/root/video/main/libavcodec' make: *** [libavcodec/libavcodec.a] Error 2 Any ideas? _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users ----- End forwarded message ----- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gkuchta at chartermi.net Thu Jul 19 23:53:01 2001 From: gkuchta at chartermi.net (Garrett Kuchta) Date: Thu, 19 Jul 2001 16:53:01 -0500 Subject: [UPDATED GCC TO VERSION 3.0] [Mplayer-users] BUG in last CVS checkout... In-Reply-To: <20010719234754.A16089@polinux2.eui.upv.es> References: <20010719234754.A16089@polinux2.eui.upv.es> Message-ID: <20010719165301.5e70db1b.gkuchta@chartermi.net> > I know it says I should not send a bug but... > dsputil.c: In function `put_pixels': > i386/dsputil_mmx.c:130: Can't find a register in class `GENERAL_REGS' while reloading `asm'. > dsputil.c: In function `put_pixels_x2': > i386/dsputil_mmx.c:186: Can't find a register in class `GENERAL_REGS' while reloading `asm'. > make[1]: *** [dsputil.o] Error 1 > make[1]: Leaving directory `/root/video/main/libavcodec' > make: *** [libavcodec/libavcodec.a] Error 2 > > > Any ideas? When I gave gcc3.0 + mplayer a shot, gcc segfaulted. :| at least you got that far. :P _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 20 03:00:22 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 20 Jul 2001 03:00:22 +0200 (CEST) Subject: [Mplayer-users] DVD playback (article in c't) In-Reply-To: <003301c10eaa$a8d0a600$6400a8c0@p3> Message-ID: <200107200100.DAA39638@thot.banki.hu> Hi, > *This message was transferred with a trial version of CommuniGate(tm) Pro* > in whitch c't is that ? 14/2001 ??? > > c't rulezzz > can you scan this article? i (we?) wanna read it :) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From j.pepas at mail.utexas.edu Fri Jul 20 07:10:14 2001 From: j.pepas at mail.utexas.edu (jason pepas) Date: Fri, 20 Jul 2001 00:10:14 -0500 Subject: [Mplayer-users] updated script Message-ID: <20010720001014.1659a006.j.pepas@mail.utexas.edu> i updated that playback script i was working on. it prints out a menu of all the vob files, or gives you the option of playing htem all sequentially also, i split it into two files so that one you can start from x and one without x running. from x, just type dvd without x running, just type dvdnox -jason jason at pepas.com file: dvd (put in /sbin, run as root) ------------------------------------------------ #!/bin/bash #variables #(set up for your system) DVDDRIVE=/dev/hdb MOUNTPOINT=/cdrom # get a dvd clear echo -n "ejecting dvd... " eject $DVDDRIVE echo "done." echo "" echo "insert a dvd." echo "press any key to close drawer." read -s -n 1 echo "" echo -n "closing drawer... " eject -t $DVDDRIVE echo "done." # mount dvd echo -n "mounting dvd... " mount $DVDDRIVE $MOUNTPOINT echo "done." # menu clear echo "--- DVD MENU ----------" PS3="enter your selection: " select input in `cd $MOUNTPOINT/video_ts;/bin/ls *.vob` "play all files" "quit" do if [ "$input" == "play all files" ]; then echo "trying "$input" vs "$filename for filename in `cd $MOUNTPOINT/video_ts;/bin/ls *.vob` do mplayer -dvdauth $DVDDRIVE $MOUNTPOINT/video_ts/$filename clear done elif [ "$input" == "quit" ]; then break else for filename in `cd $MOUNTPOINT/video_ts;/bin/ls *.vob` do if [ "$input" == "$filename" ]; then echo "playing $filename..." mplayer -dvdauth $DVDDRIVE $MOUNTPOINT/video_ts/$filename clear fi done fi done # eject dvd clear echo -n "unmounting dvd... " umount $MOUNTPOINT echo "done." echo -n "ejecting dvd... " eject $DVDDRIVE echo "done." echo "" echo "remove your dvd." echo "press any key to close drawer." read -s -n 1 echo "" echo -n "closing drawer... " eject -t $DVDDRIVE echo "done." clear file: dvdnox (put in /sbin and run as root) -------------------------------------------------------- #!/bin/bash #variables #(set up for your system) DVDDRIVE=/dev/hdb MOUNTPOINT=/cdrom PLAYSCRIPT=/sbin/dvd # start x echo "starting X... " # set up geometry to the xterm will take up the full screen # this way, the xterm always has focus for key commands, # even if you move your mouse. # 102x39 works for 1024x768 xinit -geometry 102x39 -fn 10x20 -rv -e $PLAYSCRIPT _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kees at outflux.net Fri Jul 20 08:15:43 2001 From: kees at outflux.net (Kees Cook) Date: Fri, 20 Jul 2001 01:15:43 -0500 Subject: [Mplayer-users] Bug in configure script for SMP machines Message-ID: <20010720011543.I22964@cpoint.net> Could you please incorporate this patch to your "configure" script? "configure" fails to detect my CPU because it doesn't expect two CPUs listed in /proc/cpuinfo. Thanks! -- Kees Cook @outflux.net -------------- next part -------------- --- MPlayer-0.18pre5/configure Fri Jul 6 15:00:22 2001 +++ MPlayer-0.18pre5-kees/configure Fri Jul 20 01:13:31 2001 @@ -338,15 +338,15 @@ _cpuinfo="TOOLS/cpuinfo" fi -pname=`$_cpuinfo | grep 'model name' | cut -d ':' -f 2` -pparam=`$_cpuinfo | grep 'features' | cut -d ':' -f 2` +pname=`$_cpuinfo | grep 'model name' | head -1 | cut -d ':' -f 2` +pparam=`$_cpuinfo | grep 'features' | head -1 | cut -d ':' -f 2` if [ -z "$pparam" ]; then - pparam=`$_cpuinfo | grep 'flags' | cut -d ':' -f 2` + pparam=`$_cpuinfo | grep 'flags' | head -1 | cut -d ':' -f 2` fi -pvendor=`$_cpuinfo | grep 'vendor_id' | cut -d ':' -f 2 | cut -d ' ' -f 2` -pfamily=`$_cpuinfo | grep 'cpu family' | cut -d ':' -f 2 | cut -d ' ' -f 2` -pmodel=`$_cpuinfo | grep -v 'model name' | grep 'model' | cut -d ':' -f 2 | cut -d ' ' -f 2` -pstepping=`$_cpuinfo | grep 'stepping' | cut -d ':' -f 2 | cut -d ' ' -f 2` +pvendor=`$_cpuinfo | grep 'vendor_id' | head -1 | cut -d ':' -f 2 | cut -d ' ' -f 2` +pfamily=`$_cpuinfo | grep 'cpu family' | head -1 | cut -d ':' -f 2 | cut -d ' ' -f 2` +pmodel=`$_cpuinfo | grep -v 'model name' | head -1 | grep 'model' | cut -d ':' -f 2 | cut -d ' ' -f 2` +pstepping=`$_cpuinfo | grep 'stepping' | head -1 | cut -d ':' -f 2 | cut -d ' ' -f 2` _mmx=no _mmx2=no From nickols_k at mail.ru Fri Jul 20 12:48:25 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Fri, 20 Jul 2001 10:48:25 +0000 (:) Subject: [Mplayer-users] [PATCH] Support for ARM platform and some Makefile improvements Message-ID: <200107200649.f6K6nMm06904@post.hq.telecet.com> Hi, Maksim Krasnyanskiy! On 2001-07-19 09:59:32 you wrote: > >>Your patch is not applicable there are too many rejected hunks. >>Contact with Arpi about or if it's possible - break your patch on parts if it's >>not whole transaction. >Hold on. It applies cleanly to the current CVS. >I did fresh check out of HEAD branch from CVS (yesterday). Hacked it. Then did cvs -d... diff -u. >And then did one more check out and applied patch, to make sure that everything is clean. >So, either you have too many uncommitted changes or I'm using wrong CVS :) >Is pserver:anonymous at mp.dev.hu:/cvsroot/mplayer correct CVS tree ? > As for me - I never apply 3rd patches without testing (particulary - directly to CVS). I should test them before. So first I applied this patch to my local copy and it was unappclicable. Ask Arpi about write access or resend correct patch. (It would be better - without cosmetic changes) Best regards! Nick (2001-07-20 10:27:06) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Fri Jul 20 12:45:22 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Fri, 20 Jul 2001 10:45:22 +0000 (:) Subject: [UPDATED GCC TO VERSION 3.0] [Mplayer-users] BUG in last CVS checkout... In-Reply-To: <20010719234754.A16089@polinux2.eui.upv.es> Message-ID: <200107200649.f6K6nGm06901@post.hq.telecet.com> Hi, data at polinux2.eui.upv.es! On 2001-07-19 23:47:54 you wrote: >----- Forwarded message from data at polinux2.eui.upv.es ----- > >Delivered-To: data at polinux.upv.es >From: data at polinux2.eui.upv.es >To: mplayer-users at lists.sourceforge.net >User-Agent: Mutt/1.3.19i >Subject: [Mplayer-users] BUG in last CVS checkout... >Errors-To: mplayer-users-admin at lists.sourceforge.net >X-BeenThere: mplayer-users at lists.sourceforge.net >X-Mailman-Version: 2.0.5 >Precedence: bulk >Reply-To: mplayer-users at lists.sourceforge.net >List-Help: >List-Post: >List-Subscribe: , > >List-Id: >List-Unsubscribe: , > >List-Archive: >Date: Tue, 17 Jul 2001 21:44:13 +0200 > > >After updating the gcc to 3.0: > >[root at nostromo main]$ gcc -v >Reading specs from /usr/lib/gcc-lib/i586-mandrake-linux/3.0/specs >Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --disable-checking --enable-long-long --enable-cstdio=stdio --enable-clocale=generic --enable-languages=c,c++,f77,objc,java --program-suffix=-3.0 --enable-objc-gc --host=i586-mandrake-linux >Thread model: posix >gcc version 3.0 > >The error I get is: > >dsputil.c: In function `put_pixels': >i386/dsputil_mmx.c:151: Can't find a register in class `GENERAL_REGS' while reloading `asm'. >dsputil.c: In function `put_pixels_x2': >i386/dsputil_mmx.c:199: Can't find a register in class `GENERAL_REGS' while reloading `asm'. >dsputil.c: In function `avg_pixels': >i386/dsputil_mmx.c:534: Can't find a register in class `GENERAL_REGS' while reloading `asm'. >make[1]: *** [dsputil.o] Error 1 >make[1]: Leaving directory `/root/video/main/libavcodec' >make: *** [libavcodec/libavcodec.a] Error 2 > >I know it says I should not send a bug but... > >Distro: Mandrake 8.0 >kernel: 2.4.6-ac2 >libc: 2.2.2 >X: 4.1.0-mdk4 >ld: GNU ld version 2.10.91 (with BFD 2.10.1.0.2) >as: GNU assembler 2.10.91 >model name : AMD-K6(tm) 3D processor >stepping : 12 >cpu MHz : 501.148 >Matrox G450 16 RAM > >Checking assembler (as) ... 2.10.91, ok >Checking Linux kernel version ... 2.4.6-ac2, ok >Install prefix: /usr/local >Checking for cpu vendor ... AuthenticAMD ( 5:8:12 ) >Checking for cpu type ... AMD-K6(tm) 3D processor >Optimizing to ... k6 >Checking for mmx support ... yes >Checking for mmx2 support ... no >Checking for 3dnow support ... yes >Checking for 3dnowex support ... no >Checking for sse support ... no >Checking for mtrr support ... yes >Screen size ... 1x1 >Checking for X11 libs ... -L/usr/X11R6/lib >Checking for X11 headers ... >Checking mga_vid device ... yes >Checking for xmga ... yes >Checking for SDL ... yes >Checking for GGI ... no >Checking for OpenGL ... yes >Checking for Xv ... yes >Checking for X11 ... yes >Checking for DGA ... yes >Checking for DGA 2.0 .. yes >Checking for Xf86VM ... yes >Checking for SVGAlib ... no >Checking for FBDev ... yes >Checking for OSS Audio ... yes >Checking for ALSA Audio ... no >Checking for ESD Audio ... yes >Checking for Sun Audio ... no >Checking for DeCSS support ... yes >Checking for PNG support ... yes >Checking for DirectShow ... yes >Checking for libavcodec ... yes >Checking for fastmemcpy ... yes >Extra libs : -L/usr/local/lib >Extra headers : -I/usr/local/include >Creating config.h > > >It has been working for a while. After today's checkout I got this: > >dsputil.c: In function `put_pixels': >i386/dsputil_mmx.c:130: Can't find a register in class `GENERAL_REGS' while reloading `asm'. >dsputil.c: In function `put_pixels_x2': >i386/dsputil_mmx.c:186: Can't find a register in class `GENERAL_REGS' while reloading `asm'. >make[1]: *** [dsputil.o] Error 1 >make[1]: Leaving directory `/root/video/main/libavcodec' >make: *** [libavcodec/libavcodec.a] Error 2 > > >Any ideas? Your compiler is sucks - contact with its respective developers. Best regards! Nick (2001-07-20 10:44:21) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jesse_hepburn at yahoo.com Fri Jul 20 08:52:47 2001 From: jesse_hepburn at yahoo.com (Jesse Hepburn) Date: Fri, 20 Jul 2001 08:52:47 +0200 Subject: [Mplayer-users] Screen saver In-Reply-To: <001801c11081$16f81ff0$6400a8c0@p3> Message-ID: <01b901c110e8$96346dc0$43aedf8a@HCRP1692> Is there any way to have mplayer automatically disable the screensaver while the movie is running? My screen saver kept going off last night (I thought the movie was screwed up, actually) Cheers, Jesse Hepburn "Desire is not an occupation" _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Wed Jul 25 19:53:51 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Wed, 25 Jul 2001 19:53:51 +0200 Subject: [Mplayer-users] DVD playback (article in c't) In-Reply-To: <200107200100.DAA39638@thot.banki.hu> References: <200107200100.DAA39638@thot.banki.hu> Message-ID: <200107251753.f6PHrqg01106@alison.hemmet.chalmers.se> > > Pro* in whitch c't is that ? 14/2001 ??? > > > > c't rulezzz > > can you scan this article? i (we?) wanna read it :) It's c't 15/2001, Page 124-127 (DVD-Player fuer Linux) I can't scan it at the moment, because I have no scanner access here, but almost every german reader of this list should have c't (what else?), so somebody will be able to. gruel _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Fri Jul 20 09:41:56 2001 From: jaf.corporation at gmx.at (JAF) Date: Fri, 20 Jul 2001 09:41:56 +0200 Subject: [Mplayer-users] DVD playback (article in c't) In-Reply-To: <200107200100.DAA39638@thot.banki.hu> Message-ID: > can you scan this article? i (we?) wanna read it :) Can you speak / read german ;-) mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From M.Hunold at t-online.de Fri Jul 20 09:24:28 2001 From: M.Hunold at t-online.de (Michael Hunold) Date: Fri, 20 Jul 2001 09:24:28 +0200 Subject: [Mplayer-users] support for TV-out of Matrox G450? References: <1143.212.28.232.37.995527768.squirrel@grobi.holtschneider.com> Message-ID: <3B57DCAC.FB2299D1@t-online.de> Hello Henning, > I'm about to buy a Matrox G450 VGA card so that I can watch movies on my > (PAL) TV using MPlayer. I read http://mp.dev.hu/MPlayer/DOCS/TVout-G400 but > I'm not sure if the method described there applies to the G450, too? I own a G450 dualhead w/ 32Mb DDR-Ram and unfortunately I never got tv-out working with the tools from "mplayer". It seems that G400 and G450 differ a lot regarding the dualhead stuff. 8-/ At the moment you can use the second head as a separate framebuffer (and redirect "mplayer" output to that head) or use it with X either as a separate screen or with the so-called xinerama extension, e.g. you have one big desktop that spans the two heads. There is no tv-out support with Matrox' X-Server at the moment. Only the G400 is supported. I really hope that they add G450 support soon. > There > also seem to be several versions of the G450, which one do I need? I recommend a G450 with 32Mb, 16Mb is too small if you want a dualhead configuration under X with high resolutions. SDR or DDR memory does not matter in my eyes. Of course you need a dualhead G450, e.g. a G450 with two output connectors. For tv-output you need an adaptor to connect to the second output -- if you are familiar with a soldering iron, you can build your on. On Matrox' website you will find a detailed pin description. > Thanks for your help > hh But you are probably better off with a G400 with dualhead support. Although you cannot buy this card anymore, I have seen several cards at www.ebay.de for example. CU Michael. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From emmanuel.pacaud at univ-poitiers.fr Fri Jul 20 10:11:53 2001 From: emmanuel.pacaud at univ-poitiers.fr (Emmanuel Pacaud) Date: Fri, 20 Jul 2001 10:11:53 +0200 Subject: [Mplayer-users] ffmpeg divx decoding problem Message-ID: <3B57E7C9.FBD45B93@univ-poitiers.fr> Salut, The new divx (ffmpeg) codecs doesn't work with one of my movies. This one plays fine with the win32 divx codec, but with ffmpeg divx, half of the screen is misrendered and mplayer complains with the message: MPlayer 0.17cvs-010708-16:16(C) 2000-2001 Arpad Gereoffy ... Error while decoding frame! A-V: 0.000 ct: 0.071 49 11% 3% 3.5% 7 I've just uploaded a part of that file on ftp://thot.banki.hu/MPlayer/incoming/. This file is named bugs_life.avi. Thanks for your work! Emmanuel. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From M.Hunold at t-online.de Fri Jul 20 10:35:54 2001 From: M.Hunold at t-online.de (Michael Hunold) Date: Fri, 20 Jul 2001 10:35:54 +0200 Subject: [Mplayer-users] Here it is: c't article about MPlayer Message-ID: <3B57ED6A.2E89D519@t-online.de> Hello *, here is a textual version of the article "In greifbarer N?he - Video-DVDs unter Linux abspielen" (It's almost done - Playing Video-DVDs with Linux) from the german c't Magazin, 15/2001, Page 124-127. It's about playing Video-DVDs with Linux and compares "OMS", "Xine", "Ogle", "VideoLAN", "MPlayer" and the commercial "LinDVD" and "PowerDVD". ----schnipp---- Der Player von Arpad Gereoffy ist als universelles Videoabspielprogramm gedacht. Mit Hilfe der libmpeg2-Bibliothek von Aaron Holtzmann & Michael Lespinasse unterst?tzt er die Wiedergabe von MPEG-1/-2, AVI-Format mit Hilfe des Win32-DLL-Loaders der AVIfile-Bibliothek, sowie OpenDivX. Wunschgem?? bannt MPlayer in letzterem Format auch Videos auf Festplatte. Nat?rlich darf auch VCD- und insbesondere Video-DVD-Support nicht fehlen. Wer Besitzer einer Matrox-Karte mit Dual-Head ist, kommt dabei sogar in den Genuss der direkten TV-Out-Unterst?tzung. Auf Wunsch ?bernimmt der Player auch die Authentifizierung und Dekodierung verschl?sselter Video-DVDs. Dazu muss man MPlayer allerdings mit LibCSS verlinken. Insgesamt gibt sich MPlayer spartanisch. Die vorliegende Version 0.18pre3 "BugCounter", ist eine reine Kommandozeilenapplikation. Von der grafischen Bedienoberfl?che gibt es bisher nur einen Screenshot. ?ber ein im Video eingeblendetes On Screen Display (OSD) zeigt MPlayer die verstrichene Zeit, eine Fortschrittsanzeige beim Spulen oder die Lautst?rke an. Leider gibt es bisher keine M?glichkeit zwischen Tonspuren zu wechseln. MPlayer spielt blind die erste Spur ab, sodass man - auch bei vielen deutschen Video-DVDs in den "Genuss" englischer Sprache kommt. Beim Abspielen von Video-DVDs produziert MPlayer beim Einsatz von XVideo oder SDL eine deutliche geringere CPU-Last als die meisten seiner Mitstreiter. Unsch?n: VOBs muss man einzeln von der gemounteten DVD abspielen. ----schnapp---- And here is a rough english translation. Please don't blame me for the factual errors in the text -- it's not due to my translation! ;-) ----schnipp---- The player from Arpad Gereoffy is ment to be an universal video player. With the help of the libmpeg2-library from Aaron Holtzmann & Michael Lespinasse it supports the playback of MPEG-1/-2, AVI files with the help of the Win32-DLL-Loader from the AVIfile library, as well as OpenDivX. With the latter, MPlayer even saves Video to harddisk just as expected. Of course, VCD- and especially Video-DVD support is included. Anyone with a Matrox Dual-Head graphics adapter can automatically use the direct support for TV-Out. If needed, the player does authentification and decryption of encrypted Video-DVDs, if MPlayer was linked with LibCSS. All in all, MPlayer looks quite spartan: the current version 0.18pre3 "BugCounter" is a pure command-line application. Regarding the GUI, there is only a snapshot at the moment. With the means of an On Screen Display (OSD), MPlayer shows the expired time of the video, a progress bar while skipping or the current volume. Unfortunately, there is no possibilty of changing between the different audio streams at the moment. MPlayer always plays the first stream, so you get english audio even with many german Video-DVDs. While playing Video-DVDs with XVideo or SDL, MPlayer produces a significant lesser CPU usage than most of his competitors. A disadvantage: VOBs have to be played one by one from a mounted DVD. ----schnapp---- CU Michael. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 20 10:40:59 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 20 Jul 2001 10:40:59 +0200 (CEST) Subject: [Mplayer-users] Bug in configure script for SMP machines In-Reply-To: <20010720011543.I22964@cpoint.net> Message-ID: <200107200840.KAA55994@thot.banki.hu> Hi, > Could you please incorporate this patch to your "configure" script? > "configure" fails to detect my CPU because it doesn't expect two CPUs > listed in /proc/cpuinfo. it is already fixed in CVS. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 20 10:46:51 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 20 Jul 2001 10:46:51 +0200 (CEST) Subject: [Mplayer-users] DVD playback (article in c't) In-Reply-To: Message-ID: <200107200846.KAA21782@thot.banki.hu> Hi, > > can you scan this article? i (we?) wanna read it :) > > Can you speak / read german ;-) > yes, a little bit. I've learned german for 6 years, but it was 8 years ago :( btw my second question will be 'who translates this?' :) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 20 10:56:50 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 20 Jul 2001 10:56:50 +0200 (CEST) Subject: [Mplayer-users] Here it is: c't article about MPlayer In-Reply-To: <3B57ED6A.2E89D519@t-online.de> Message-ID: <200107200856.KAA44296@thot.banki.hu> Hi, > here is a textual version of the article > "In greifbarer N?he - Video-DVDs unter Linux > abspielen" (It's almost done - Playing Video-DVDs > with Linux) from the german > c't Magazin, 15/2001, Page 124-127. Thank you! Btw I understood the german version too :) > skipping or the current volume. Unfortunately, there is > no possibilty of changing between the different audio streams > at the moment. MPlayer always plays the first stream, so > you get english audio even with many german Video-DVDs. not true... they have never read help or docs? or DVD-FAQ? -aid ... > his competitors. A disadvantage: VOBs have to be played > one by one from a mounted DVD. yea, we're working on this. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From data at polinux2.eui.upv.es Fri Jul 20 11:02:48 2001 From: data at polinux2.eui.upv.es (data at polinux2.eui.upv.es) Date: Fri, 20 Jul 2001 11:02:48 +0200 Subject: [Mplayer-users] Screen saver In-Reply-To: <01b901c110e8$96346dc0$43aedf8a@HCRP1692> References: <001801c11081$16f81ff0$6400a8c0@p3> <01b901c110e8$96346dc0$43aedf8a@HCRP1692> Message-ID: <20010720110248.A19724@polinux2.eui.upv.es> On Fri, Jul 20, 2001 at 08:52:47AM +0200, Jesse Hepburn wrote: > Is there any way to have mplayer automatically disable the screensaver > while the movie is running? > My screen saver kept going off last night (I thought the movie was > screwed up, actually) xset s off _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From smoore at serikat.es Fri Jul 20 11:12:24 2001 From: smoore at serikat.es (Saimon Moore) Date: Fri, 20 Jul 2001 11:12:24 +0200 Subject: [Mplayer-users] HELP! Installing SDL 1.2.1 destroyed audio configuration Message-ID: <008e01c110fc$1b438f60$20021dac@serikat.es> Hi all, I'm new to mplayer, I downloaded the source yesterday and proceeded to compile it (I'm using SUSE 7.2). Configure came up with a warning about the fact that my version of SDL (1.1.6) was too old and that I should update to 1.1.8 or later so I downloaded the 1.2.1 rpm from the SDL web site. I installed it with rpm -i and it got installed ok but configure came up with the same complaint so I figured I should have removed version 1.1.6 first (It was still there). So I tried removing it, but there were quite a few dependencies. As i had installed version 1.2.1, I forced the uninstall of 1.1.6 thinking that any dependencies 1.1.6 had would be covered by the 1.2.1 version. I tried mplayer, and the video works great, but there was no audio. I tried various drivers and none seemed to work. Then i realised that I had lost audio for the whole system. Obviously,forcing the uninstall of 1.1.6 wasn't such a good idea :(. Could anyone suggest how I could recuperate audio on my system as I don't have much of an idea about how audio works in Linux. Thanks in advance. Saimon _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 20 11:11:42 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Fri, 20 Jul 2001 11:11:42 +0200 Subject: [Mplayer-users] updated script In-Reply-To: <20010720001014.1659a006.j.pepas@mail.utexas.edu> References: <20010720001014.1659a006.j.pepas@mail.utexas.edu> Message-ID: <12298724388.20010720111142@gmx.de> Hello jason, Friday, July 20, 2001, 7:10:14 AM, you wrote: > i updated that playback script i was working on. > it prints out a menu of all the vob files, or gives you the option of playing htem all sequentially > also, i split it into two files so that one you can start from x and one without x running. >>from x, just type dvd > without x running, just type dvdnox already looks much better, but I see two flaws: First you should require a keypress before ejecting dvd tray or ask if to eject at all (some people have a door in front of their drives, so it's no good idea to eject it without asking or maybe dvd is already in the drive). Second you should check for additional dir VIDEO_TS (in addition to video_ts) and also check vor *.VOB in addition to *.vob. Also I'd suggest an option to play all vobs of one series (without vob 0, which is usually the menue), ie. VTS_06_*.VOB. > -jason > jason at pepas.com [skipped script] -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 20 11:13:01 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Fri, 20 Jul 2001 11:13:01 +0200 Subject: [Mplayer-users] Bug in configure script for SMP machines In-Reply-To: <20010720011543.I22964@cpoint.net> References: <20010720011543.I22964@cpoint.net> Message-ID: <1698802901.20010720111301@gmx.de> Hello Kees, Friday, July 20, 2001, 8:15:43 AM, you wrote: > Could you please incorporate this patch to your "configure" script? > "configure" fails to detect my CPU because it doesn't expect two CPUs > listed in /proc/cpuinfo. please check current cvs first, I think bug is already fixed there. > Thanks! -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jesse_hepburn at yahoo.com Fri Jul 20 11:20:42 2001 From: jesse_hepburn at yahoo.com (Jesse Hepburn) Date: Fri, 20 Jul 2001 11:20:42 +0200 Subject: [Mplayer-users] Screen saver In-Reply-To: <798940879.20010720111519@gmx.de> Message-ID: <01d001c110fd$3fd1aa00$43aedf8a@HCRP1692> I'm using the -vo x11 -zoom options I'm running Mandrake 8.0 under KDE2. -----Original Message----- From: mplayer-users-admin at lists.sourceforge.net [mailto:mplayer-users-admin at lists.sourceforge.net] On Behalf Of Felix B?nemann Sent: Friday, July 20, 2001 11:15 AM To: Jesse Hepburn Subject: Re: [Mplayer-users] Screen saver Hello Jesse, Friday, July 20, 2001, 8:52:47 AM, you wrote: > Is there any way to have mplayer automatically disable the screensaver > while the movie is running? > My screen saver kept going off last night (I thought the movie was > screwed up, actually) actually it should be disabled, what MPlayer video out driver are you using and which WindowManager? > Cheers, > Jesse Hepburn > "Desire is not an occupation" -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 20 11:19:20 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Fri, 20 Jul 2001 11:19:20 +0200 Subject: [Mplayer-users] ffmpeg divx decoding problem In-Reply-To: <3B57E7C9.FBD45B93@univ-poitiers.fr> References: <3B57E7C9.FBD45B93@univ-poitiers.fr> Message-ID: <2899181936.20010720111920@gmx.de> Hello Emmanuel, Friday, July 20, 2001, 10:11:53 AM, you wrote: > Salut, > The new divx (ffmpeg) codecs doesn't work with one of my movies. This > one plays fine with the win32 divx codec, but with ffmpeg divx, half of > the screen is misrendered and mplayer complains with the message: > MPlayer 0.17cvs-010708-16:16(C) 2000-2001 Arpad Gereoffy There have been a lot of changes to the ffmpeg code in the last days, you should try with most recent cvs first. [snip] > Thanks for your work! > Emmanuel. -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 20 11:15:19 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Fri, 20 Jul 2001 11:15:19 +0200 Subject: [Mplayer-users] Screen saver In-Reply-To: <01b901c110e8$96346dc0$43aedf8a@HCRP1692> References: <01b901c110e8$96346dc0$43aedf8a@HCRP1692> Message-ID: <798940879.20010720111519@gmx.de> Hello Jesse, Friday, July 20, 2001, 8:52:47 AM, you wrote: > Is there any way to have mplayer automatically disable the screensaver > while the movie is running? > My screen saver kept going off last night (I thought the movie was > screwed up, actually) actually it should be disabled, what MPlayer video out driver are you using and which WindowManager? > Cheers, > Jesse Hepburn > "Desire is not an occupation" -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Fri Jul 20 11:40:41 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Fri, 20 Jul 2001 12:40:41 +0300 (EEST) Subject: [Mplayer-users] Screen saver In-Reply-To: <798940879.20010720111519@gmx.de> Message-ID: On Fri, 20 Jul 2001, [ISO-8859-1] Felix B?nemann wrote: > > Is there any way to have mplayer automatically disable the screensaver > > while the movie is running? > > My screen saver kept going off last night (I thought the movie was > > screwed up, actually) > actually it should be disabled, what MPlayer video out driver are you > using and which WindowManager? perhaps he is using xscreensaver, which cannot be disabled with xset s off. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 20 11:33:04 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 20 Jul 2001 11:33:04 +0200 (CEST) Subject: [Mplayer-users] Screen saver In-Reply-To: <01d001c110fd$3fd1aa00$43aedf8a@HCRP1692> Message-ID: <200107200933.LAA48738@thot.banki.hu> Hi, > I'm using the -vo x11 -zoom options > I'm running Mandrake 8.0 under KDE2. yea. i've already heard that KDE ignores X messages... so it ignores standard way to disable screensaver :( and for those who will ask why avifile works: it uses qt, the base od KDE. i think they know how to disable KDE screensavers :) > > -----Original Message----- > From: mplayer-users-admin at lists.sourceforge.net > [mailto:mplayer-users-admin at lists.sourceforge.net] On Behalf Of Felix > B?nemann > Sent: Friday, July 20, 2001 11:15 AM > To: Jesse Hepburn > Subject: Re: [Mplayer-users] Screen saver > > Hello Jesse, > > Friday, July 20, 2001, 8:52:47 AM, you wrote: > > > Is there any way to have mplayer automatically disable the screensaver > > while the movie is running? > > My screen saver kept going off last night (I thought the movie was > > screwed up, actually) > actually it should be disabled, what MPlayer video out driver are you > using and which WindowManager? > > Cheers, > > Jesse Hepburn > > > "Desire is not an occupation" > > -- > Best regards, > Felix mailto:atmosfear at users.sourceforge.net > > > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Fri Jul 20 11:38:29 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Fri, 20 Jul 2001 12:38:29 +0300 (EEST) Subject: [Mplayer-users] HELP! Installing SDL 1.2.1 destroyed audio configuration In-Reply-To: <008e01c110fc$1b438f60$20021dac@serikat.es> Message-ID: > Could anyone suggest how I could recuperate audio on my system as I don't > have much of an idea about how audio works in Linux. you should have used rpm -U (upgrade) instead of rpm -i (install). i use slackware, which is NOT rpm-based, so i'm not sure i'm giving you the right advice, but try to remove the new SDL and install it again. perhaps uninstalling the old SDL removed something from the new one too. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 20 11:38:38 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 20 Jul 2001 11:38:38 +0200 (CEST) Subject: [Mplayer-users] Screen saver In-Reply-To: Message-ID: <200107200938.LAA32660@thot.banki.hu> Hi, > > > while the movie is running? > > > My screen saver kept going off last night (I thought the movie was > > > screwed up, actually) > > > actually it should be disabled, what MPlayer video out driver are you > > using and which WindowManager? > > perhaps he is using xscreensaver, which cannot be disabled with xset s off. hmm. how can it be disabled? mplayer uses the same method as 'xset s off', and 'xset dpms off' does. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Fri Jul 20 11:57:31 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Fri, 20 Jul 2001 12:57:31 +0300 (EEST) Subject: [Mplayer-users] Screen saver In-Reply-To: <200107200938.LAA32660@thot.banki.hu> Message-ID: > > perhaps he is using xscreensaver, which cannot be disabled with xset s off. > hmm. how can it be disabled? i could not find any way to disable it, except killing it. according to the man, killing xscreensaver should be done with 'xscreensaver-command -exit', but there is no way to disable it. what i have found is that 'killall -STOP xscreensaver' is enough to disable it, and 'killall -CONT xscreensaver' to revive it. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 20 11:57:57 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Fri, 20 Jul 2001 11:57:57 +0200 Subject: [Mplayer-users] Screen saver In-Reply-To: <01d001c110fd$3fd1aa00$43aedf8a@HCRP1692> References: <01d001c110fd$3fd1aa00$43aedf8a@HCRP1692> Message-ID: <18101498877.20010720115757@gmx.de> Hello Jesse, Friday, July 20, 2001, 11:20:42 AM, you wrote: > I'm using the -vo x11 -zoom options > I'm running Mandrake 8.0 under KDE2. KDE is using it's own screensaver system, not X Screensaver, that's why it doesn't work. > -----Original Message----- > From: mplayer-users-admin at lists.sourceforge.net > [mailto:mplayer-users-admin at lists.sourceforge.net] On Behalf Of Felix > B?nemann > Sent: Friday, July 20, 2001 11:15 AM > To: Jesse Hepburn > Subject: Re: [Mplayer-users] Screen saver > Hello Jesse, > Friday, July 20, 2001, 8:52:47 AM, you wrote: >> Is there any way to have mplayer automatically disable the screensaver >> while the movie is running? >> My screen saver kept going off last night (I thought the movie was >> screwed up, actually) > actually it should be disabled, what MPlayer video out driver are you > using and which WindowManager? >> Cheers, >> Jesse Hepburn >> "Desire is not an occupation" -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 20 12:04:02 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 20 Jul 2001 12:04:02 +0200 (CEST) Subject: [Mplayer-users] Screen saver In-Reply-To: Message-ID: <200107201004.MAA45856@thot.banki.hu> Hi, > > > perhaps he is using xscreensaver, which cannot be disabled with xset s off. > > hmm. how can it be disabled? > > i could not find any way to disable it, except killing it. according to the > man, killing xscreensaver should be done with 'xscreensaver-command -exit', > but there is no way to disable it. what i have found is that 'killall -STOP > xscreensaver' is enough to disable it, and 'killall -CONT xscreensaver' to > revive it. It's ugly & messy :) but if you need it, simply add these to end of saver_on() and saver_off() at libvo/x11_common.c: system("killall -STOP xscreensaver"); and system("killall -CONT xscreensaver"); btw this requires root... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Thu Jul 19 23:28:16 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Thu, 19 Jul 2001 23:28:16 +0200 Subject: [Mplayer-users] [PATCH] Support for ARM platform and some Makefile improvements In-Reply-To: <4.3.1.0.20010719095354.033bcaa0@mail1> References: <4.3.1.0.20010718170835.0329d7b0@mail1> <4.3.1.0.20010719095354.033bcaa0@mail1> Message-ID: <01071923281604.00511@astral> On Thursday, 19. July 2001 18:59, you wrote: > >Your patch is not applicable there are too many rejected hunks. > >Contact with Arpi about or if it's possible - break your patch on parts if > > it's not whole transaction. > > Hold on. It applies cleanly to the current CVS. > I did fresh check out of HEAD branch from CVS (yesterday). Hacked it. Then > did cvs -d... diff -u. And then did one more check out and applied patch, > to make sure that everything is clean. So, either you have too many > uncommitted changes or I'm using wrong CVS :) Is > pserver:anonymous at mp.dev.hu:/cvsroot/mplayer correct CVS tree ? yes it is (although mplayerhq.hu looks cooler =), btw. you should change == in configure to = it's more portable (otherwise it'll cause probs on some other OSes (other bash/sh version I guess). As it doesn't do big changes I'll check it out tomorrow and commit to cvs if it doesn't break stuff. > > Max -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From rpbrown at xtra.co.nz Fri Jul 20 12:33:21 2001 From: rpbrown at xtra.co.nz (mdew) Date: Fri, 20 Jul 2001 22:33:21 +1200 Subject: [Mplayer-users] losing sound when playing a vob Message-ID: <20010720223321.011e319f.rpbrown@xtra.co.nz> storm:/home/mdew/temp# mplayer -aid 128 -vo sdl VTS_01_1.VOB MPlayer 0.17cvs-010719-00:37(C) 2000-2001 Arpad Gereoffy Reading /root/.mplayer/codecs.conf: 15 audio & 28 video codecs font: can't open file: /root/.mplayer/font/font.desc ==> Found video stream: 0 Detected MPEG-PS file format! ==> Found audio stream: 128 mpeg2dec-0.2.0-release (C) 2000-2001 Aaron Holtzman & Michel Lespinasse libmpeg2: Using MMXEXT for IDCT transform libmpeg2: Using MMXEXT for motion compensation VIDEO: MPEG2 720x576 (aspect 3) 25.00 fps 12250.0 kbps (1531.2 kbyte/s) [V] filefmt:2 fourcc:0x10000001 size:720x576 fps:25.00 ftime:=0.0400 Detected audio codec: [ac3] drv:3 (AC3) dec_audio: Allocating 6144 + 65536 = 71680 bytes for output buffer !! libac3 (core v0.6.2) : using SSE optimization 5.1 Mode 48.0 KHz 384 kbps Complete Main Audio Service AUDIO: srate=48000 chans=2 bps=2 sfmt=0x10 ratio: 48000->192000 Detected video codec: [mpeg12] drv:1 (MPEG 1 or 2) VO: [sdl] 720x576 => 720x576 Planar YV12 VO: Description: SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!) VO: Author: Ryan C. Gordon , Felix Buenemann Disabling DPMS stat: 1 SDL: Using driver: x11 AO: [oss] 48000Hz Stereo Signed 16-bit (Little-Endian) AO: Description: OSS/ioctl audio output AO: Author: A'rpi ao2: 48000 Hz 2 chans Signed 16-bit (Little-Endian) audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endi an)) audio_setup: using 48000 Hz samplerate (requested: 48000) audio_setup: frags: 8/8 (8192 bytes/frag) free: 65536 Start playing... ==> Found audio stream: 129 ==> Found audio stream: 130 ==> Found audio stream: 131 ==> Found audio stream: 132 A: 75.7 ( 75.3) V: 67.0 A-V: 8.287 ct: 2.252 1667 60% 0% 10.1% 1144 DEMUXER: Too many (4096 in 8275580 bytes) video packets in the buffer! (maybe you play a non-interleaved stream/file or video codec failed) A: 75.7 ( 75.6) V: 71.0 A-V: 4.669 ct: 2.648 1766 62% 0% 9.5% 1243 Exiting... (Quit) Successfully enabled DPMS storm:/home/mdew/temp# i read the DOCS/DVD ...aid doesnt help me here... (using alsa9 with a yamaha PCI-YMF) both -vo sdl and -vo dga give me the same results, sound for 30secs..then blank -ao alsa9 is buggy ..and that also does the same thing :( _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Fri Jul 20 12:41:30 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Fri, 20 Jul 2001 12:41:30 +0200 Subject: [Mplayer-users] typo in mplayer.1 Message-ID: <20010720124130.A88539@hoth.amu.edu.pl> double LIRC section in manual grep -n LIRC mplayer.1 165:specifies a configfile for LIRC (see http://www.lirc.org) if you don't like the default ~/.lircrc 280:specifies a configfile for LIRC (see http://www.lirc.org) if you don't like the default ~/.lircrc Best Regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Fri Jul 20 12:43:16 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Fri, 20 Jul 2001 13:43:16 +0300 (EEST) Subject: [Mplayer-users] Screen saver In-Reply-To: <200107201004.MAA45856@thot.banki.hu> Message-ID: > system("killall -STOP xscreensaver"); > and > system("killall -CONT xscreensaver"); > > btw this requires root... depends on who is running the xscreensaver - in my case it would work :) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jesse_hepburn at yahoo.com Fri Jul 20 12:45:25 2001 From: jesse_hepburn at yahoo.com (Jesse Hepburn) Date: Fri, 20 Jul 2001 12:45:25 +0200 Subject: [Mplayer-users] Screen saver In-Reply-To: Message-ID: <01d501c11109$155fc3e0$43aedf8a@HCRP1692> I guess my solution is to either switch to gnome (not my preferred option) or manually turn the screen saver off before I run the movie (correct?) Thanks for all your suggestions, though =) Cheers, Jesse -----Original Message----- From: mplayer-users-admin at lists.sourceforge.net [mailto:mplayer-users-admin at lists.sourceforge.net] On Behalf Of lanzz at lanzz.org Sent: Friday, July 20, 2001 12:43 PM To: mplayer-users at lists.sourceforge.net Subject: Re: Re: Re: [Mplayer-users] Screen saver > system("killall -STOP xscreensaver"); > and > system("killall -CONT xscreensaver"); > > btw this requires root... depends on who is running the xscreensaver - in my case it would work :) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Fri Jul 20 12:45:49 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Fri, 20 Jul 2001 12:45:49 +0200 (MET DST) Subject: [Mplayer-users] Here it is: c't article about MPlayer Message-ID: <200107201045.f6KAjnB02858@pheidippides.md.chalmers.se> Arpi wrote: >> skipping or the current volume. Unfortunately, there is >> no possibilty of changing between the different audio streams >> at the moment. MPlayer always plays the first stream, so >> you get english audio even with many german Video-DVDs. >not true... they have never read help or docs? or DVD-FAQ? >-aid ... Write back to them (address is ct at heise.de): The text should be something like: "RTFM!!!" :-) gruel P.S. You should really write a small comment to them, they always have a small section where they add information and correct errors of previous issues. Maybe your information will we added to this next time. -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 20 12:45:10 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 20 Jul 2001 12:45:10 +0200 (CEST) Subject: [Mplayer-users] losing sound when playing a vob In-Reply-To: <20010720223321.011e319f.rpbrown@xtra.co.nz> Message-ID: <200107201045.MAA37762@thot.banki.hu> Hi, > A: 75.7 ( 75.3) V: 67.0 A-V: 8.287 ct: 2.252 1667 60% 0% 10.1% 1144 ^^^^^^ ^^^^^ your system (or vga bandwith/driver) is too slow for dvd playback.. try -framedrop (it's in normal FAQ, not DVD-Faq) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Fri Jul 20 12:58:57 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Fri, 20 Jul 2001 13:58:57 +0300 (EEST) Subject: [Mplayer-users] subtitles Message-ID: i'm having a strange problem with subtitles. i'm running 0.18pre5. all subtitles are displayed without the last line - so with one-line subtitle i see nothing, with two-line i see only the first line, etc. is this bug known, or fixed, or some problem on my side? the subtitles are in format {startframe}{endframe}line 1|line 2|line 3. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From rpbrown at xtra.co.nz Fri Jul 20 13:08:07 2001 From: rpbrown at xtra.co.nz (mdew) Date: Fri, 20 Jul 2001 23:08:07 +1200 Subject: [Mplayer-users] losing sound when playing a vob In-Reply-To: <200107201045.MAA37762@thot.banki.hu> References: <20010720223321.011e319f.rpbrown@xtra.co.nz> <200107201045.MAA37762@thot.banki.hu> Message-ID: <20010720230807.43ae9a15.rpbrown@xtra.co.nz> On Fri, 20 Jul 2001 12:45:10 +0200 (CEST) Arpi wrote: > Hi, > > > A: 75.7 ( 75.3) V: 67.0 A-V: 8.287 ct: 2.252 1667 60% 0% 10.1% 1144 > ^^^^^^ ^^^^^ > > your system (or vga bandwith/driver) is too slow for dvd playback.. > try -framedrop > > (it's in normal FAQ, not DVD-Faq) > > A'rpi / Astral & ESP-team celery 600? too slow? pfft :P i found the problem, running mplayer as root caused the audio to do strange things, however as a normal user...no probs.. why is that? _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lists at reserv.at Fri Jul 20 13:38:05 2001 From: lists at reserv.at (Martin Aumueller) Date: Fri, 20 Jul 2001 13:38:05 +0200 Subject: [Mplayer-users] Screen saver In-Reply-To: <01d501c11109$155fc3e0$43aedf8a@HCRP1692>; from jesse_hepburn@yahoo.com on Fri, Jul 20, 2001 at 12:45:25PM +0200 References: <01d501c11109$155fc3e0$43aedf8a@HCRP1692> Message-ID: <20010720133804.A934@tortoise.alexandrinum.de> Hi! On 20. Juli 2001 Jesse Hepburn wrote: > I guess my solution is to either switch to gnome (not my preferred > option) or manually turn the screen saver off before I run the movie > (correct?) I'm using another solution: I turned the screensaver off in the KDE control center and then I created a file ~/.kde/Autostart/screensaver that reads -------------------------- #! /bin/sh xset s on -------------------------- So I'm using the plain X method of handling the screensaver with KDE2. Martin _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Fri Jul 20 14:26:11 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Fri, 20 Jul 2001 14:26:11 +0200 (MET DST) Subject: [Mplayer-users] libavcodecs <-> DShow Message-ID: <200107201226.f6KCQBB05832@pheidippides.md.chalmers.se> Hi, is there a way to switch between original DivX;-) and libavcodec without changing codecs.conf? E.g. a command line switch I overlooked? gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Fri Jul 20 14:32:21 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Fri, 20 Jul 2001 14:32:21 +0200 Subject: [Mplayer-users] GUI preview shot images are not available Message-ID: <20010720143221.A5406@telia.com> Hi guys I just wanted to point out that the GUI preview shots at: http://mplayer.sourceforge.net/homepage/screen.html are not displayed. Looking in http://mplayer.sourceforge.net/homepage/images/ I can see that shot17.jpg and shot18.jpg are not there... -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From emmanuel.pacaud at univ-poitiers.fr Fri Jul 20 14:53:55 2001 From: emmanuel.pacaud at univ-poitiers.fr (Emmanuel Pacaud) Date: Fri, 20 Jul 2001 14:53:55 +0200 Subject: [Mplayer-users] ffmpeg divx decoding problem Message-ID: <3B5829E3.9EB48D57@univ-poitiers.fr> Salut, Thanks for the reply. >> The new divx (ffmpeg) codecs doesn't work with one of my movies. This >> one plays fine with the win32 divx codec, but with ffmpeg divx, half of >> the screen is misrendered and mplayer complains with the message: > >> MPlayer 0.17cvs-010708-16:16(C) 2000-2001 Arpad Gereoffy >There have been a lot of changes to the ffmpeg code in the last days, >you should try with most recent cvs first. I should not have included the mplayer header line in my mail, because it was from a test I did this morning on my work PC with an old CVS version. I tried yesterday at home with the lastest CVS version (07-19) and the problem was here. Please try the file I've uploaded on ftp (bugs_life.avi). Sinceres salutations, Emmanuel. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Fri Jul 20 15:01:34 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Fri, 20 Jul 2001 16:01:34 +0300 (EEST) Subject: [Mplayer-users] Re: subtitles Message-ID: On Fri, 20 Jul 2001 lanzz at lanzz.org wrote: > i'm having a strange problem with subtitles. i'm running 0.18pre5. > all subtitles are displayed without the last line - so with one-line > subtitle i see nothing, with two-line i see only the first line, etc. > is this bug known, or fixed, or some problem on my side? > the subtitles are in format {startframe}{endframe}line 1|line 2|line 3. correction: this behaviour doesn't occur with every movie. it occured with 'crouching tiger, hidden dragon'. i uploaded a part of it in incoming (cthd.avi) and the subtitles in question (bg.sub). the subtitles looked fine when i tried them with another movie (it was hilarious at some points :)) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Fri Jul 20 14:59:15 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Fri, 20 Jul 2001 15:59:15 +0300 (EEST) Subject: [Mplayer-users] cyrillic fonts Message-ID: when i finally managed to put my hands on the elusive cyrillic fonts (thanks, arpi), it turned out that they're quite ugly. so i just made my own. they're not a whole font like bgfont.zip, they're just the cyrillic letters and a cyr.desc which takes the rest from arial-12. the resulting bundle is much smaller and even looks better :) p.s. it's in incoming. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 20 17:37:15 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 20 Jul 2001 17:37:15 +0200 (CEST) Subject: [Mplayer-users] losing sound when playing a vob In-Reply-To: <20010720230807.43ae9a15.rpbrown@xtra.co.nz> Message-ID: <200107201537.RAA29452@thot.banki.hu> Hi, > > Hi, > > > > > A: 75.7 ( 75.3) V: 67.0 A-V: 8.287 ct: 2.252 1667 60% 0% 10.1% 1144 > > ^^^^^^ ^^^^^ > > > > your system (or vga bandwith/driver) is too slow for dvd playback.. > > try -framedrop > > > > (it's in normal FAQ, not DVD-Faq) > > > > A'rpi / Astral & ESP-team > > celery 600? too slow? pfft :P i said 'your system'. usually vga card (or its driver) is the slow thing. what card do you have? with which driver do you use it? (-vo ?) did you read DOCS/VIDEOCARDS ? > i found the problem, running mplayer as root caused the audio to do strange things, however as a normal user...no probs.. why is that? dunno. maybe driver problem... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 20 17:43:18 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 20 Jul 2001 17:43:18 +0200 (CEST) Subject: [Mplayer-users] GUI preview shot images are not available In-Reply-To: <20010720143221.A5406@telia.com> Message-ID: <200107201543.RAA33730@thot.banki.hu> Hi, > Hi guys > > I just wanted to point out that the GUI preview shots at: > > http://mplayer.sourceforge.net/homepage/screen.html > > are not displayed. Looking in http://mplayer.sourceforge.net/homepage/images/ > I can see that shot17.jpg and shot18.jpg are not there... the official homepage is at http://mplayer.dev.hu, so check it, no sourceforge. it's very outdated. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Fri Jul 20 17:39:04 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Fri, 20 Jul 2001 17:39:04 +0200 (MET DST) Subject: [Mplayer-users] Re: [Mplayer-dev-eng] Porting to IRIX/Solaris Message-ID: <200107201539.f6KFd4B11319@pheidippides.md.chalmers.se> Statement of the day: BOYS, YOU ARE SO F****** GREAT! Current CVS of mplayer compiles out-of-the-box on SUN Solaris (SPARC) (./configure; gmake). After copying codecs.conf to $HOME/.mplayer (btw, it could do this automatically, if there is no such file) it plays MPEG (no sound) and after I removed win32-DLLs from codecs.conf it also plays DivX-AVI (no sound) using libavcodec. Then I added -ao sun to the config and I got sound! I really did! Wow... I'm not used to software working that well... gruel P.S. Once more, where can I donate money for beer and pizza to the developers? -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 20 17:42:26 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 20 Jul 2001 17:42:26 +0200 (CEST) Subject: [Mplayer-users] libavcodecs <-> DShow In-Reply-To: <200107201226.f6KCQBB05832@pheidippides.md.chalmers.se> Message-ID: <200107201542.RAA42120@thot.banki.hu> Hi, > Hi, > > is there a way to switch between original DivX;-) and libavcodec without > changing codecs.conf? E.g. a command line switch I overlooked? see the -vc option. -vc divx -> VfW -vc divxds -> Dshow -vc ffdix -> libavcodec -vc divx4 -> divx4linux A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 20 17:54:37 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Fri, 20 Jul 2001 17:54:37 +0200 Subject: [Mplayer-users] Here it is: c't article about MPlayer In-Reply-To: <200107201045.f6KAjnB02858@pheidippides.md.chalmers.se> References: <200107201045.f6KAjnB02858@pheidippides.md.chalmers.se> Message-ID: <138122898799.20010720175437@gmx.de> Hello Christoph, Friday, July 20, 2001, 12:45:49 PM, you wrote: > Arpi wrote: >>> skipping or the current volume. Unfortunately, there is >>> no possibilty of changing between the different audio streams >>> at the moment. MPlayer always plays the first stream, so >>> you get english audio even with many german Video-DVDs. >>not true... they have never read help or docs? or DVD-FAQ? >>-aid ... > Write back to them (address is ct at heise.de): The text should be > something like: "RTFM!!!" :-) our press relationship department should handle that. (Gabuccci :) > gruel > P.S. You should really write a small comment to them, they always have a small > section where they add information and correct errors of previous issues. Maybe > your information will we added to this next time. Arpi you could also write me text in English and I tranlate to German or so... or I could write myself :) -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Fri Jul 20 14:43:35 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Fri, 20 Jul 2001 14:43:35 +0200 Subject: [Mplayer-users] typo in mplayer.1 In-Reply-To: <20010720124130.A88539@hoth.amu.edu.pl>; from nexus@hoth.amu.edu.pl on Fri, Jul 20, 2001 at 12:41:30PM +0200 References: <20010720124130.A88539@hoth.amu.edu.pl> Message-ID: <20010720144335.A1583@woodstock.localdomain> It's the Question that drives us, Bohdan Horst : > double LIRC section in manual Thank you, I've corrected it. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From atmosfear at users.sourceforge.net Fri Jul 20 17:59:01 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Fri, 20 Jul 2001 17:59:01 +0200 Subject: [Mplayer-users] losing sound when playing a vob In-Reply-To: <20010720230807.43ae9a15.rpbrown@xtra.co.nz> References: <20010720223321.011e319f.rpbrown@xtra.co.nz> <200107201045.MAA37762@thot.banki.hu> <20010720230807.43ae9a15.rpbrown@xtra.co.nz> Message-ID: <168123162748.20010720175901@gmx.de> Hello mdew, Friday, July 20, 2001, 1:08:07 PM, you wrote: > On Fri, 20 Jul 2001 12:45:10 +0200 (CEST) > Arpi wrote: >> Hi, >> >> > A: 75.7 ( 75.3) V: 67.0 A-V: 8.287 ct: 2.252 1667 60% 0% 10.1% 1144 >> ^^^^^^ ^^^^^ >> >> your system (or vga bandwith/driver) is too slow for dvd playback.. >> try -framedrop >> >> (it's in normal FAQ, not DVD-Faq) >> >> A'rpi / Astral & ESP-team > celery 600? too slow? pfft :P > i found the problem, running mplayer as root caused the audio to do strange > things, however as a normal user...no probs.. why is that? I don't believe that's true. Celeron 600 should be fast enough only if you have adequate fast Graphics card with XVideo support and good XVideo drivers, you could also give -vo dga -bpp 16 a try. -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Fri Jul 20 18:01:25 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Fri, 20 Jul 2001 18:01:25 +0200 (MET DST) Subject: [Mplayer-users] libavcodecs <-> DShow Message-ID: <200107201601.f6KG1PB11952@pheidippides.md.chalmers.se> Hi, >> is there a way to switch between original DivX;-) and libavcodec without >> changing codecs.conf? E.g. a command line switch I overlooked? > >see the -vc option. >-vc divx -> VfW >-vc divxds -> Dshow >-vc ffdix -> libavcodec I guess it should be -vc ffdivx ? >-vc divx4 -> divx4linux So it's not in the man-page, not in the DOCS. Even DOCS/Divx4Linux talks only about -vc odivx or -vc divx4, but not about the others... Anyway, thanks... gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 20 18:01:52 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Fri, 20 Jul 2001 18:01:52 +0200 Subject: [Mplayer-users] libavcodecs <-> DShow In-Reply-To: <200107201226.f6KCQBB05832@pheidippides.md.chalmers.se> References: <200107201226.f6KCQBB05832@pheidippides.md.chalmers.se> Message-ID: <34123333914.20010720180152@gmx.de> Hello Christoph, Friday, July 20, 2001, 2:26:11 PM, you wrote: > Hi, > is there a way to switch between original DivX;-) and libavcodec without > changing codecs.conf? E.g. a command line switch I overlooked? yes either -vfm 6 (will change libavcodec driver family and fall back to other driver families (like dshow, vfw, libmpeg2) if it fails) or -vc ffdivx which will force ffdivx codec from codecs.conf and fail if it doesn't work (no fallback). > gruel -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Fri Jul 20 18:03:01 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Fri, 20 Jul 2001 18:03:01 +0200 (MET DST) Subject: [Mplayer-users] Here it is: c't article about MPlayer Message-ID: <200107201603.f6KG31B12077@pheidippides.md.chalmers.se> >> Write back to them (address is ct at heise.de): The text should be >> something like: "RTFM!!!" :-) >our press relationship department should handle that. >(Gabuccci :) Ahhhh, der Mann versteht mich :-))) gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 20 18:03:37 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Fri, 20 Jul 2001 18:03:37 +0200 Subject: [Mplayer-users] GUI preview shot images are not available In-Reply-To: <20010720143221.A5406@telia.com> References: <20010720143221.A5406@telia.com> Message-ID: <104123439216.20010720180337@gmx.de> Hello Andr?, Friday, July 20, 2001, 2:32:21 PM, you wrote: > Hi guys > I just wanted to point out that the GUI preview shots at: > http://mplayer.sourceforge.net/homepage/screen.html > are not displayed. Looking in http://mplayer.sourceforge.net/homepage/images/ > I can see that shot17.jpg and shot18.jpg are not there... try using http://mplayerhq.hu/ instead -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 20 18:07:28 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Fri, 20 Jul 2001 18:07:28 +0200 Subject: [Mplayer-users] cyrillic fonts In-Reply-To: References: Message-ID: <197123670278.20010720180728@gmx.de> Hello lanzz, Friday, July 20, 2001, 2:59:15 PM, you wrote: > when i finally managed to put my hands on the elusive cyrillic fonts (thanks, > arpi), it turned out that they're quite ugly. so i just made my own. they're > not a whole font like bgfont.zip, they're just the cyrillic letters and a > cyr.desc which takes the rest from arial-12. the resulting bundle is much > smaller and even looks better :) btw. theres a tool to create fonts in the TOOLS dir using freetype lib (haven#t teste it myself). > p.s. it's in incoming. -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 20 18:40:18 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Fri, 20 Jul 2001 18:40:18 +0200 Subject: [Mplayer-users] Re: [Mplayer-dev-eng] Porting to IRIX/Solaris In-Reply-To: <200107201539.f6KFd4B11319@pheidippides.md.chalmers.se> References: <200107201539.f6KFd4B11319@pheidippides.md.chalmers.se> Message-ID: <53125640120.20010720184018@gmx.de> Hello Christoph, Friday, July 20, 2001, 5:39:04 PM, you wrote: > Statement of the day: > BOYS, YOU ARE SO F****** GREAT! > Current CVS of mplayer compiles out-of-the-box on SUN Solaris (SPARC) > (./configure; gmake). After copying codecs.conf to $HOME/.mplayer > (btw, it could do this automatically, if there is no such file) it plays agreed. > MPEG (no sound) and after I removed win32-DLLs from codecs.conf it also plays > DivX-AVI (no sound) using libavcodec. Then I added -ao sun to the config > and I got sound! I really did! hmm, maybe change default sound device to sun on __sparc__ ? > Wow... I'm not used to software working that well... > gruel > P.S. Once more, where can I donate money for beer and pizza to the developers? hmm maybe we really should consider opening a bank account for donations =) -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 20 18:49:10 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Fri, 20 Jul 2001 18:49:10 +0200 Subject: [Mplayer-users] libavcodecs <-> DShow In-Reply-To: <200107201542.RAA42120@thot.banki.hu> References: <200107201542.RAA42120@thot.banki.hu> Message-ID: <150126172105.20010720184910@gmx.de> Hello Arpi, Friday, July 20, 2001, 5:42:26 PM, you wrote: > Hi, >> Hi, >> >> is there a way to switch between original DivX;-) and libavcodec without >> changing codecs.conf? E.g. a command line switch I overlooked? > see the -vc option. -vc divx ->> VfW -vc divxds ->> Dshow -vc ffdix ->> libavcodec -vc divx4 ->> divx4linux -vc odivx ->> even faster divx4linux > A'rpi / Astral & ESP-team -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kreucher at msu.edu Fri Jul 20 18:58:25 2001 From: kreucher at msu.edu (Nicholas J Kreucher) Date: Fri, 20 Jul 2001 12:58:25 -0400 Subject: [Mplayer-users] audio from DVDs quiet Message-ID: <20010720125825.4799556e.kreucher@msu.edu> hello. MPlayer is great. one thing to report: audio volume from DVDs is rather quiet. seems consistent with any DVD i try. very odd to me. audio volume of most other (maybe all?) .mpeg and .avi files is considerably higher. to watch a movie i have to turn my master volume to 100% and pcm volume to 80% and higher. at this level all other system sounds (ex mp3s from xmms and the "bring" in gaim) are very very loud. i have been getting around this problem by making sure nothing else will be playing sounds while i watch DVDs. however, it would be nice if DVDs were at a more normal volume level. also it is a tad annoying because when turned way up, my sound card emits a slight buzzing sound, where as with mp3 and such i don't have to turn it way up and don't hear the buzz. i have ALSA sound setup. have tried with and w/o -ao alsa5 and also tried w/o ALSA and just plain OSS driver for my card: no change. any thoughts? i've tried the CVS version. also i checked the source and read a little bit about ac3 audio. experimented with the dialnorm variable in libac3/parse.c with no luck. is there a global "audio gain" variable that could be a command line switch perhaps? thanks! - Nicholas J Kreucher -- Software -------- RedHat 7.1 kernel 2.4.6 (also tried rh7.1's 2.4.2-2) libc-2.2.2.so XFree86 Version 4.0.3 gcc version 3.0 GNU ld version 2.10.91 (with BFD 2.10.91.0.2) GNU assembler 2.10.91 -- Hardware -------- AMD Athlon(tm) Processor 1.2 GHz nVidia GeForce 2 MX [nVidia Corporation NV11 (rev a1)] NVIDIA_GLX-1.0-1251 (with mtrr working) Trident Microsystems 4DWave NX with ALSA 0.5.11 -- mplayer -v ... output -------- MPlayer 0.18pre5(C) 2000-2001 Arpad Gereoffy CommandLine: '-v' '-dvdauth' '/dev/dvd' '-ao' 'alsa5' '/mnt/cdrom/video_ts/vts_01_1.vob' Reading /home/nick/.mplayer/codecs.conf: 15 audio & 32 video codecs font: can't open file: /home/nick/.mplayer/font/font.desc DVD is encrypted, issuing authentication ... LBA: 14738 DVD title key is: E169102898 DVD auth sequence seems to be OK. ASF_check: not ASF guid! system stream synced at 0xD (13)! {ERROR5,c=0} ==> Found video stream: 0 Detected MPEG-PS file format! ==> Found subtitle: 3 ==> Found subtitle: 2 ==> Found subtitle: 1 ==> Found subtitle: 0 ==> Found audio stream: 128 detected MPG-PS audio format: 3 Searching for sequence header... OK! mpeg2dec-0.2.0-release (C) 2000-2001 Aaron Holtzman & Michel Lespinasse libmpeg2: Using MMX for IDCT transform libmpeg2: Using 3DNOW for motion compensation mpeg bitrate: 17500 (445C) VIDEO: MPEG2 720x480 (aspect 3) 29.97 fps 8750.0 kbps (1093.8 kbyte/s) [V] filefmt:2 fourcc:0x10000001 size:720x480 fps:29.97 ftime:=0.0334 Detected audio codec: [ac3] drv:3 (AC3) Initializing audio codec... dec_audio: Allocating 6144 + 65536 = 71680 bytes for output buffer !! libac3 (core v0.6.2) : using 3dNow-dsp! optimization 5.1 Mode 48.0 KHz 384 kbps Complete Main Audio Service AUDIO: srate=48000 chans=2 bps=2 sfmt=0x10 ratio: 48000->192000 Detected video codec: [mpeg12] drv:1 (MPEG 1 or 2) vo_debug: query(Planar YV12) returned 0x1 vo_debug1: out_fmt=Planar YV12 vo_debug2: out_fmt=Planar YV12 VO: [xv] 720x480 => 720x480 Planar YV12 VO: Description: X11/Xv VO: Author: Gerd Knorr video_out->init(720x480->720x480,flags=0,'MPlayer',0x32315659) vo_debug3: out_fmt=Planar YV12 vo: X11 color mask: FFFF (R:F800 G:7E0 B:1F) vo: X11 running at 1024x768 depth: 16 (":0.0" => local display) Xvideo image format: 0x32595559 (YUY2) packed Xvideo image format: 0x32315659 (YV12) planar Xvideo image format: 0x59565955 (UYVY) packed Xvideo image format: 0x30323449 (I420) planar using Xvideo port 49 for hw scaling [xv] dcx: 0 dcy: 0 dx: 0 dy: 0 dw: 720 dh: 480 INFO: Video OUT driver init OK! Setting up lirc support... LIRC init was successful. AO: [alsa5] 48000Hz Stereo Signed 16-bit (Little-Endian) AO: Description: ALSA-0.5.x audio output AO: Author: Alex Beregszaszi alsa-init: requested format: 48000 Hz, 2 channels, Signed 16-bit (Little-Endian) alsa-init: compiled for ALSA-0.5.10b (1290) alsa-init: 1 soundcard found, using: Trident 4DWave alsa-init: setting preferred buffer size from driver: 131072 bytes AUDIO: 48000 Hz/2 channels/192000 bps/131072 bytes buffer/Signed 16-bit Little Endian Start playing... ==> Found audio stream: 131 ==> Found audio stream: 130 ==> Found audio stream: 129 [xv] dcx: 1 dcy: 22 dx: 0 dy: 0 dw: 720 dh: 480 {ERROR5,c=0} A: 0.8 ( 0.2) V: 0.2 A-V: 0.084 ct: 0.000 3 0% 0% 0.0% 0 A: 1.0 ( 0.3) V: 0.2 A-V: 0.051 ct: 0.003 4 0% 0% 0.0% 0 A: 1.0 ( 0.3) V: 0.3 A-V: 0.064 ct: 0.007 5 0% 0% 0.0% 0 A: 1.0 ( 0.4) V: 0.3 A-V: 0.028 ct: 0.009 6 0% 0% 0.0% 0 A: 1.1 ( 0.4) V: 0.3 A-V: 0.067 ct: 0.013 7 0% 0% 0.0% 0 {ERROR5,c=0} A: 1.1 ( 0.4) V: 0.4 A-V: 0.073 ct: 0.016 9 0% 0% 0.0% 0 A: 1.1 ( 0.5) V: 0.4 A-V: 0.041 ct: 0.019 10 0% 0% 0.0% 0 . . . frame drop 0, -0.63 A: 7.9 ( 7.9) V: 7.2 A-V: 0.007 ct: 0.035 213 12% 0% 28.9% 1 Exiting... (Quit) max framesize was 70600 bytes Cleaning up lirc stuff. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Fri Jul 20 19:03:32 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Fri, 20 Jul 2001 19:03:32 +0200 Subject: [Mplayer-users] libavcodecs <-> DShow In-Reply-To: <34123333914.20010720180152@gmx.de>; from atmosfear@users.sourceforge.net on Fri, Jul 20, 2001 at 06:01:52PM +0200 References: <200107201226.f6KCQBB05832@pheidippides.md.chalmers.se> <34123333914.20010720180152@gmx.de> Message-ID: <20010720190331.A1583@woodstock.localdomain> It's the Question that drives us, Felix B?nemann : > yes either -vfm 6 (will change libavcodec driver family and fall back You mean -vfm 5, don't you? BTW now manpage is updated.. Sorry for the delay(s) but I concentrate on rewriting/editing DOCS. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From atmosfear at users.sourceforge.net Fri Jul 20 19:04:14 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Fri, 20 Jul 2001 19:04:14 +0200 Subject: [Mplayer-users] audio from DVDs quiet In-Reply-To: <20010720125825.4799556e.kreucher@msu.edu> References: <20010720125825.4799556e.kreucher@msu.edu> Message-ID: <55127075995.20010720190414@gmx.de> Hello Nicholas, Friday, July 20, 2001, 6:58:25 PM, you wrote: > hello. MPlayer is great. > one thing to report: audio volume from DVDs is rather quiet. seems consistent with any DVD i try. > very odd to me. audio volume of most other (maybe all?) .mpeg and .avi files is considerably higher. to watch a movie i have to turn my master volume to 100% and pcm volume to 80% and higher. at > this level all other system sounds (ex mp3s from xmms and the "bring" in gaim) are very very loud. i have been getting around this problem by making sure nothing else will be playing sounds while i > watch DVDs. however, it would be nice if DVDs were at a more normal volume level. also it is a tad annoying because when turned way up, my sound card emits a slight buzzing sound, where as with mp3 > and such i don't have to turn it way up and don't hear the buzz. > i have ALSA sound setup. have tried with and w/o -ao alsa5 and also tried w/o ALSA and just plain OSS driver for my card: no change. > any thoughts? i've tried the CVS version. also i checked the source and read a little bit about ac3 audio. experimented with the dialnorm variable in libac3/parse.c with no luck. is there a global > "audio gain" variable that could be a command line switch perhaps? It's normal, sound on DVDs is alway less loud, because DVD has very broad sound spectrum so most times it's not very loud but goes very loud in action scenens then (ie. explosions). > thanks! > - Nicholas J Kreucher -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From maxk at qualcomm.com Fri Jul 20 19:08:59 2001 From: maxk at qualcomm.com (Maksim Krasnyanskiy) Date: Fri, 20 Jul 2001 10:08:59 -0700 Subject: [Mplayer-users] [PATCH] Support for ARM platform and some Makefile improvements In-Reply-To: <01071923281604.00511@astral> References: <4.3.1.0.20010719095354.033bcaa0@mail1> <4.3.1.0.20010718170835.0329d7b0@mail1> <4.3.1.0.20010719095354.033bcaa0@mail1> Message-ID: <4.3.1.0.20010720100710.031fcee0@mail1> At 11:28 PM 7/19/01 +0200, you wrote: >On Thursday, 19. July 2001 18:59, you wrote: > > >Your patch is not applicable there are too many rejected hunks. > > >Contact with Arpi about or if it's possible - break your patch on parts if > > > it's not whole transaction. > > > > Hold on. It applies cleanly to the current CVS. > > I did fresh check out of HEAD branch from CVS (yesterday). Hacked it. Then > > did cvs -d... diff -u. And then did one more check out and applied patch, > > to make sure that everything is clean. So, either you have too many > > uncommitted changes or I'm using wrong CVS :) Is > > pserver:anonymous at mp.dev.hu:/cvsroot/mplayer correct CVS tree ? >yes it is (although mplayerhq.hu looks cooler =), Ok. >btw. you should change == in configure to = it's more portable (otherwise it'll cause >probs on some other OSes (other bash/sh version I guess). Sure. It's a typo. >As it doesn't do big changes I'll check it out tomorrow and commit to cvs if it doesn't >break stuff. Super. Let me know if brakes something. Max Maksim Krasnyanskiy Senior Kernel Engineer Qualcomm Incorporated maxk at qualcomm.com http://bluez.sf.net http://vtun.sf.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Fri Jul 20 20:12:31 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Fri, 20 Jul 2001 20:12:31 +0200 Subject: [Mplayer-users] GUI preview shot images are not available In-Reply-To: <200107201543.RAA33730@thot.banki.hu> References: <200107201543.RAA33730@thot.banki.hu> Message-ID: <20010720201231.A686@telia.com> Arpi wrote: > the official homepage is at > http://mplayer.dev.hu, so check it, no sourceforge. it's very outdated. Oh, now I remember reading that. Could you add that in big bold letters to the sourceforge page though? -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 20 20:23:23 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 20 Jul 2001 20:23:23 +0200 (CEST) Subject: [Mplayer-users] libavcodecs <-> DShow In-Reply-To: <200107201601.f6KG1PB11952@pheidippides.md.chalmers.se> Message-ID: <200107201823.UAA60094@thot.banki.hu> Hi, > >> is there a way to switch between original DivX;-) and libavcodec without > >> changing codecs.conf? E.g. a command line switch I overlooked? > > > >see the -vc option. > >-vc divx -> VfW > >-vc divxds -> Dshow > >-vc ffdix -> libavcodec > > I guess it should be -vc ffdivx ? yes. it was tupo :( > >-vc divx4 -> divx4linux > > So it's not in the man-page, not in the DOCS. Even DOCS/Divx4Linux talks only > about -vc odivx or -vc divx4, but not about the others... i think that -vc and -ac options are in the docs (manpage). the available codec names can be found in codecs.conf. btw someone should implement -ac help / -vc help to list codecs. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 20 20:43:52 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 20 Jul 2001 20:43:52 +0200 (CEST) Subject: [Mplayer-users] cyrillic fonts In-Reply-To: <197123670278.20010720180728@gmx.de> Message-ID: <200107201843.UAA29160@thot.banki.hu> Hi, > > when i finally managed to put my hands on the elusive cyrillic fonts (thanks, > > arpi), it turned out that they're quite ugly. so i just made my own. they're > > not a whole font like bgfont.zip, they're just the cyrillic letters and a > > cyr.desc which takes the rest from arial-12. the resulting bundle is much > > smaller and even looks better :) > btw. theres a tool to create fonts in the TOOLS dir using freetype > lib (haven#t teste it myself). It only creates 32-511 unicode char map. you have to hack .desc file to fit your codepage, and make the aplhamap with GIMP. but there is a better fontgen tool, at the ftp, it supports codepages, and also generates alphamap too: ftp://mplayer.dev.hu/MPlayer/contrib/fonts/subfont-1.0a.tar.bz2 A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Fri Jul 20 20:53:23 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Fri, 20 Jul 2001 20:53:23 +0200 Subject: [Mplayer-users] A-V increases *a lot* with October_sky.avi Message-ID: <20010720205323.A2955@telia.com> I just uploaded 5 megs of October sky to incoming. With this file A-V goes way up on my macine (up to 81 after 48 seconds) which I don't see on other files. Also, after 48 seconds the video goes really slow and mplayer prints this: DEMUXER: Too many (1989 in 8388620 bytes) video packets in the buffer! (maybe you play a non-interleaved stream/file or video codec failed) The file is available as October_sky.avi in incoming. Let me know if I should upload more of it. -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From line72 at home.com Fri Jul 20 20:58:16 2001 From: line72 at home.com (Mark D'voo) Date: Fri, 20 Jul 2001 13:58:16 -0500 Subject: [Mplayer-users] video output Message-ID: <01072013581600.04321@line72.plano1.tx.home.com> I have a 1.2 gig athlon and a geforce 3 card. Mplayer has been working great, but yesterday, i hooked my computer up to my tv through the geforce 3 s-video out. When i did this, mplayer wouldn't let my run my movies with -vo xv which is what i usually use because it's fastest. x11 and sdl seemed to slow to run full screen at 800x600 ( the video kept laggin). I then triedm fsdga which worked great except it doesn't actually fill up the full screen. Mplayer takes over full screen but the actually video size is probably only half the size of the screen. any ideas? mark _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 20 21:07:21 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 20 Jul 2001 21:07:21 +0200 (CEST) Subject: [Mplayer-users] GUI preview shot images are not available In-Reply-To: <20010720201231.A686@telia.com> Message-ID: <200107201907.VAA10458@thot.banki.hu> Hi, > Arpi wrote: > > > the official homepage is at > > http://mplayer.dev.hu, so check it, no sourceforge. it's very outdated. > > Oh, now I remember reading that. Could you add that in big bold letters to > the sourceforge page though? it's forwarded to new page. maybe you used exact url, or your browser is buggy... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 20 21:10:33 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 20 Jul 2001 21:10:33 +0200 (CEST) Subject: [Mplayer-users] video output In-Reply-To: <01072013581600.04321@line72.plano1.tx.home.com> Message-ID: <200107201910.VAA46804@thot.banki.hu> Hi, > I have a 1.2 gig athlon and a geforce 3 card. Mplayer has been working > great, but yesterday, i hooked my computer up to my tv through the geforce 3 > s-video out. When i did this, mplayer wouldn't let my run my movies with -vo > xv which is what i usually use because it's fastest. x11 and sdl seemed to > slow to run full screen at 800x600 ( the video kept laggin). I then triedm > fsdga which worked great except it doesn't actually fill up the full screen. > Mplayer takes over full screen but the actually video size is probably only > half the size of the screen. any ideas? > nvidia sucks... Xv usually doesn't work on TV-out ports. it's a special thing, handled by DAC chips. TV-out doesn't support YUV overlays. (there is a trick for matrox g400 to swap heads, this way you can route signal from DAC to TV-out... but it's a horrible hack) about fsdga: it's obsoleted, and very buggy. use -vo sdl if you want full-screen with software scaling. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Fri Jul 20 21:31:00 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Fri, 20 Jul 2001 21:31:00 +0200 Subject: [Mplayer-users] libavcodecs <-> DShow In-Reply-To: <200107201542.RAA42120@thot.banki.hu> References: <200107201542.RAA42120@thot.banki.hu> Message-ID: <20010720213100.A3274@telia.com> Arpi wrote: > see the -vc option. > -vc divx -> VfW > -vc divxds -> Dshow > -vc ffdix -> libavcodec > -vc divx4 -> divx4linux Cool. It would be nice if you could do a '-vc help' and have the available codecs listed, just like you can with audio and video drivers. Just a suggestion, -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 20 21:37:52 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Fri, 20 Jul 2001 21:37:52 +0200 Subject: [Mplayer-users] A-V increases *a lot* with October_sky.avi In-Reply-To: <20010720205323.A2955@telia.com> References: <20010720205323.A2955@telia.com> Message-ID: <80136294220.20010720213752@gmx.de> Hello Andr?, Friday, July 20, 2001, 8:53:23 PM, you wrote: > I just uploaded 5 megs of October sky to incoming. With this file A-V > goes way up on my macine (up to 81 after 48 seconds) which I don't see > on other files. > Also, after 48 seconds the video goes really slow and mplayer prints this: > DEMUXER: Too many (1989 in 8388620 bytes) video packets in the buffer! > (maybe you play a non-interleaved stream/file or video codec failed) > The file is available as October_sky.avi in incoming. Let me know if I > should upload more of it. please RTFM DOCS/BUGS sections about av sync first and try if it solves your probs if not write proper bug report according to DOCS/BUGREPORTS. -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 20 21:39:45 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Fri, 20 Jul 2001 21:39:45 +0200 Subject: [Mplayer-users] video output In-Reply-To: <200107201910.VAA46804@thot.banki.hu> References: <200107201910.VAA46804@thot.banki.hu> Message-ID: <30136406782.20010720213945@gmx.de> Hello Arpi, Friday, July 20, 2001, 9:10:33 PM, you wrote: > Hi, >> I have a 1.2 gig athlon and a geforce 3 card. Mplayer has been working >> great, but yesterday, i hooked my computer up to my tv through the geforce 3 >> s-video out. When i did this, mplayer wouldn't let my run my movies with -vo >> xv which is what i usually use because it's fastest. x11 and sdl seemed to >> slow to run full screen at 800x600 ( the video kept laggin). I then triedm >> fsdga which worked great except it doesn't actually fill up the full screen. >> Mplayer takes over full screen but the actually video size is probably only >> half the size of the screen. any ideas? >> > > nvidia sucks... > > Xv usually doesn't work on TV-out ports. > it's a special thing, handled by DAC chips. > TV-out doesn't support YUV overlays. > (there is a trick for matrox g400 to swap heads, this way you can route > signal from DAC to TV-out... but it's a horrible hack) > about fsdga: it's obsoleted, and very buggy. > use -vo sdl if you want full-screen with software scaling. and use -vo sdl:dga then, it's apparently fastest with software scaling. > A'rpi / Astral & ESP-team -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 20 22:58:47 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 20 Jul 2001 22:58:47 +0200 (CEST) Subject: [Mplayer-users] problematic files uploaded to FTP... Message-ID: <200107202058.WAA14648@thot.banki.hu> Hi, I've just checked files uploaded to the mplayer FTP. So the results: Diet.avi & Push[1].avi they are using uncompressed/msrle 0x1 video format, it's unsupported. The Simpsons - S06E24 - Lemon of Troy.asf it plays well for me, but it has a broken frame in teh middle. mpayer rints: 'error decoding frame', and the video cpu usage % gets corrupted (-203727782%). the later thing (corrupted timer) has been fixed in CVS, by calling emms() after the codec. i think that win32 codecs doesn't reset MMX state at broken frames. maybe this is the reason why windows media player hangs/crashes then. skater_breaking_his_legs.mpeg it's really a Quicktime/MOV file, using Cinepak codec. it's just renamed to .mpeg, but it's really .mov dune.avi, cthd.avi, October_Sky.avi they plays well, without problems. please upload a small .txt file with the same filename as video (but .txt extension) describing problems, and including mplayer -v output. Willow.asf to big for me to download now (i'll download it next monday, from work) what's teh problem with it? and where? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From maxk at qualcomm.com Fri Jul 20 23:12:50 2001 From: maxk at qualcomm.com (Maksim Krasnyanskiy) Date: Fri, 20 Jul 2001 14:12:50 -0700 Subject: [Mplayer-users] [PATCH] Support for ARM platform and some Makefile improvements In-Reply-To: <200107200649.f6K6nMm06904@post.hq.telecet.com> Message-ID: <4.3.1.0.20010720140754.03487310@mail1> Nick, > >>Your patch is not applicable there are too many rejected hunks. > >>Contact with Arpi about or if it's possible - break your patch on parts if it's > >>not whole transaction. > >Hold on. It applies cleanly to the current CVS. > >I did fresh check out of HEAD branch from CVS (yesterday). Hacked it. Then did cvs -d... diff -u. > >And then did one more check out and applied patch, to make sure that everything is clean. > >So, either you have too many uncommitted changes or I'm using wrong CVS :) > >Is pserver:anonymous at mp.dev.hu:/cvsroot/mplayer correct CVS tree ? > > >As for me - I never apply 3rd patches without testing (particulary - directly to CVS). >I should test them before. Sure. Who said that you should apply and commit without testing. What I said is that patch applies just fine to latest code in CVS. >So first I applied this patch to my local copy and it was unappclicable. Which means that you have _uncommited_ changes. Max Maksim Krasnyanskiy Senior Kernel Engineer Qualcomm Incorporated maxk at qualcomm.com http://bluez.sf.net http://vtun.sf.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sat Jul 21 02:11:28 2001 From: arpi at thot.banki.hu (Arpi) Date: Sat, 21 Jul 2001 02:11:28 +0200 (CEST) Subject: [Mplayer-users] subtitles go unsyncronized in about an hour In-Reply-To: <200107182253.AAA34728@thot.banki.hu> Message-ID: <200107210011.CAA29530@thot.banki.hu> Hi, > > A> > Hi, I saw there are some questions/bugs about subtitles and it's my time to > > A> > speak. I'm having some problems with the syncronization. The problem is > > A> > that with a lot of filmes, the subtitles works just fine but when it played > > A> > about and hour, the subtitles starts to go unsyncronized, if I'm not wrong, > > A> > they appear later (I mean, first is the voice, then the subtitles). I have > > A> > to put them back in sync with 'x' (or 'z') but the keep going slower and I > > A> > must keep doing the 'x' press, about once every 5-10 minutes. > > A> Hmm. Is it ok at the first hour? > > A> I think it's a math precision problem. I got similar thing with -bps option, > > A> until i changed float to double. I'll review subtitle code. > > > > I use always -bps (don't remember why I add it to ~/.mplayer/config). If I > > use -ss 3600 (for start playing at the first hour) the subtitles works > > well, (for 5-10 minutes as when I play the complete movie) so is not a > > -subfps problem. > No, it is time counter problem. > I saw (for -bps) that x+x+x+x+x differs _a_lot_ from 5*x, if i'm using > float. (of course not 5, it's summed about 50000 times). > I got near perfect result (no big difference between multiplied and summed) > for a long period and at a given point the difference began to increasing. > Maybe because of using gcc -mfast-math ? With double it's ok. Ok, it's fixed now in CVS. I changed incremental (v_pts+=frame_time) v_pts calculation to multiplicative (v_pts=frame_no*frame_time). SHould work better now. Please try it and tell me the results. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From line72 at home.com Sat Jul 21 04:52:56 2001 From: line72 at home.com (Mark D'voo) Date: Fri, 20 Jul 2001 21:52:56 -0500 Subject: [Mplayer-users] Re: video output Message-ID: <01072021525600.06515@line72.plano1.tx.home.com> Hello Arpi, Friday, July 20, 2001, 9:10:33 PM, you wrote: > Hi, >> I have a 1.2 gig athlon and a geforce 3 card. Mplayer has been working >> great, but yesterday, i hooked my computer up to my tv through the geforce 3 >> s-video out. When i did this, mplayer wouldn't let my run my movies with -vo >> xv which is what i usually use because it's fastest. x11 and sdl seemed to >> slow to run full screen at 800x600 ( the video kept laggin). I then triedm >> fsdga which worked great except it doesn't actually fill up the full screen. >> Mplayer takes over full screen but the actually video size is probably only >> half the size of the screen. any ideas? >> > > nvidia sucks... > > Xv usually doesn't work on TV-out ports. > it's a special thing, handled by DAC chips. > TV-out doesn't support YUV overlays. > (there is a trick for matrox g400 to swap heads, this way you can route > signal from DAC to TV-out... but it's a horrible hack) > about fsdga: it's obsoleted, and very buggy. > use -vo sdl if you want full-screen with software scaling. and use -vo sdl:dga then, it's apparently fastest with software scaling. > A'rpi / Astral & ESP-team -vo sdl:dga doesn't work. I have MPlayer 0.17cvs-010620-18:14, do i need to newer version for it ? Mark -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Sat Jul 21 12:13:54 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Sat, 21 Jul 2001 10:13:54 +0000 (:) Subject: [Mplayer-users] ffmpeg divx decoding problem In-Reply-To: <3B57E7C9.FBD45B93@univ-poitiers.fr> Message-ID: Hi, Emmanuel Pacaud! On 2001-07-20 10:11:53 you wrote: >Salut, > >The new divx (ffmpeg) codecs doesn't work with one of my movies. This >one plays fine with the win32 divx codec, but with ffmpeg divx, half of >the screen is misrendered and mplayer complains with the message: > >MPlayer 0.17cvs-010708-16:16(C) 2000-2001 Arpad Gereoffy > >... >Error while decoding frame! A-V: 0.000 ct: 0.071 49 11% 3% 3.5% >7 > >I've just uploaded a part of that file on >ftp://thot.banki.hu/MPlayer/incoming/. This file is named bugs_life.avi. > I've found there nothing! Could you upload it on ftp://mplayer.dev.hu? Best regards! Nick (2001-07-21 10:13:06) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sat Jul 21 10:44:16 2001 From: arpi at thot.banki.hu (Arpi) Date: Sat, 21 Jul 2001 10:44:16 +0200 (CEST) Subject: [Mplayer-users] Re: video output In-Reply-To: <01072021525600.06515@line72.plano1.tx.home.com> Message-ID: <200107210844.KAA34046@thot.banki.hu> Hi, > > -vo sdl:dga doesn't work. I have MPlayer 0.17cvs-010620-18:14, do i need to > newer version for it ? no, it should work. did you read DOCS/VIDEOCARDS,mand DOCS/DGA ? if still not ok, then read DOCS/BUGREPORTS, and send a uality bugreport. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Sat Jul 21 11:21:31 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Sat, 21 Jul 2001 11:21:31 +0200 Subject: [Mplayer-users] broken ffdivx Message-ID: <20010721112131.A30891@hoth.amu.edu.pl> uploaded broken1.avi + broken2.avi + broken.txt to incoming both looks perfect with divx and divxds and both doesn't look good with ffdivx (MPlayer 0.17cvs-010721-10:21(C)) Best Regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sat Jul 21 00:16:59 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sat, 21 Jul 2001 00:16:59 +0200 Subject: [Mplayer-users] subtitles In-Reply-To: References: Message-ID: <01072100165907.00511@astral> On Friday, 20. July 2001 12:58, you wrote: > i'm having a strange problem with subtitles. i'm running 0.18pre5. > all subtitles are displayed without the last line - so with one-line > subtitle i see nothing, with two-line i see only the first line, etc. > is this bug known, or fixed, or some problem on my side? > the subtitles are in format {startframe}{endframe}line 1|line 2|line 3. > very strange, maybe up a short piece of the clip along with the subtitle file to mplayer's ftp site. -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sat Jul 21 00:07:32 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sat, 21 Jul 2001 00:07:32 +0200 Subject: [Mplayer-users] ffmpeg divx decoding problem In-Reply-To: <2899181936.20010720111920@gmx.de> References: <3B57E7C9.FBD45B93@univ-poitiers.fr> <2899181936.20010720111920@gmx.de> Message-ID: <01072100073206.00511@astral> On Friday, 20. July 2001 11:19, you wrote: > Hello Emmanuel, > > Friday, July 20, 2001, 10:11:53 AM, you wrote: > > Salut, > > > > The new divx (ffmpeg) codecs doesn't work with one of my movies. This > > one plays fine with the win32 divx codec, but with ffmpeg divx, half of > > the screen is misrendered and mplayer complains with the message: Thanks, I've also have a clip with same probs, it's apparently prob with video whose height is nit a multiple of 16 (at least it's the case for my video). > > > > MPlayer 0.17cvs-010708-16:16(C) 2000-2001 Arpad Gereoffy > > There have been a lot of changes to the ffmpeg code in the last days, > you should try with most recent cvs first. > > [snip] > > > Thanks for your work! > > > > Emmanuel. -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sat Jul 21 00:51:01 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sat, 21 Jul 2001 00:51:01 +0200 Subject: [Mplayer-users] [PATCH] Support for ARM platform and some Makefile improvements In-Reply-To: <4.3.1.0.20010718170835.0329d7b0@mail1> References: <4.3.1.0.20010718170835.0329d7b0@mail1> Message-ID: <01072100510109.00511@astral> On Thursday, 19. July 2001 02:21, you wrote: > Hi Folks, > > Finally I was able to find some time to make a patch. > Attached patch (against latest CVS) includes: > New configure option '--target'. Cross-compilation should be ok now. > ARM is now a supported platform. > Minor Makefiles cleanups. > > Here is example, how to cross compile for iPAQ: > ./configure --target=arm-linux --disable-css --with-x11libdir=/usr/arm/lib > --with-x11incdir=/usr/arm/lib --disable-gcc-checking > I've tested patch amd it has lots of failed hunks, which I list below, as you say you are using current cvs, make sure you didn't use any switches to receive older revisions in the past as those settings will be saved. Additionally I see lots of cosmetic changes which are unwanted in the patch (ie. breaking up long lines, removing tabs and stuff), we only want the stuff needed to support StrongARM in mplayer, nothin more, nothing less ;) So I advise you to get latest MPlayer cvs tree, apply only the changes needed and then resend new clean patch. astral:~/develop/mplayer/main.copy # cat version.h #define VERSION "0.17cvs-010720-19:13" astral:~/develop/mplayer/main.copy # patch -i mplayer_ipaq_patch patching file Makefile Hunk #2 FAILED at 86. Hunk #4 succeeded at 131 (offset 2 lines). Hunk #5 succeeded at 165 (offset 2 lines). 1 out of 5 hunks FAILED -- saving rejects to file Makefile.rej patching file configure Hunk #1 succeeded at 115 with fuzz 2. Hunk #2 succeeded at 180 (offset 2 lines). Hunk #3 succeeded at 311 (offset 2 lines). Hunk #4 succeeded at 336 (offset 2 lines). Hunk #5 succeeded at 656 (offset 2 lines). Hunk #6 succeeded at 942 with fuzz 2 (offset 3 lines). Hunk #7 succeeded at 1238 (offset 6 lines). patching file Makefile Hunk #1 FAILED at 6. 1 out of 1 hunk FAILED -- saving rejects to file Makefile.rej patching file Makefile Hunk #1 FAILED at 2. 1 out of 1 hunk FAILED -- saving rejects to file Makefile.rej patching file Makefile Hunk #1 FAILED at 1. Hunk #2 FAILED at 14. 2 out of 2 hunks FAILED -- saving rejects to file Makefile.rej patching file Makefile Hunk #1 FAILED at 9. Hunk #2 FAILED at 24. 2 out of 2 hunks FAILED -- saving rejects to file Makefile.rej patching file Makefile Hunk #1 FAILED at 5. 1 out of 1 hunk FAILED -- saving rejects to file Makefile.rej > Max -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From adamrudolf at yahoo.com Sat Jul 21 12:56:31 2001 From: adamrudolf at yahoo.com (Adam Bertil) Date: Sat, 21 Jul 2001 03:56:31 -0700 (PDT) Subject: [Mplayer-users] Bugreport-voodoo3 rh7.1 and xvideo Message-ID: <20010721105631.12359.qmail@web3903.mail.yahoo.com> Hello! First great video player(works fine using everthing expect xv extensions for xfree). Mplayer(pre5-cvs does not compile today 21jul) complains about this: --- video_out->init(640x320->640x320,flags=0,'MPlayer',0x32315659) vo_debug3: out_fmt=Planar YV12 vo: X11 color mask: FFFFFF (R:FF0000 G:FF00 B:FF) vo: X11 running at 1024x768 depth: 32 (":0" => local display) Xvideo image format: 0x32315659 (YV12) planar Xvideo image format: 0x30323449 (I420) planar using Xvideo port 46 for hw scaling X Error of failed request: BadAccess (attempt to access private resource denied) Major opcode of failed request: 146 (MIT-SHM) Minor opcode of failed request: 1 (X_ShmAttach) Serial number of failed request: 39 Current serial number in output stream: 40 -- When using mplayer -vo xv a.mpg I used xfree and voodoo3 24bit but 16bit color same thing happens. Xfree is orginal from Rh7.1 -version 4.0.3. I tried running as root also same problem. I attached system info,config files and log files. Oh i know i use the "forbidden" gcc 2.96-85 version but everthing else works fine(x11,fbdev,svgalib) so i dont think thats the problem. Hope these helps. bye Adam __________________________________________________ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: voodoo3.txt URL: From as at sci.fi Sat Jul 21 13:03:25 2001 From: as at sci.fi (Anssi Saari) Date: Sat, 21 Jul 2001 14:03:25 +0300 Subject: [Mplayer-users] Intel Music Coder working Message-ID: <20010721140324.A23355@sci.fi> Hi, I have a couple of old clips where the audio is in Intel's IMC format. After copying the Windows driver to /usr/lib/win32 and putting driver acm dll "imc32.acm" to codecs.conf in the IMC section, it seems to work just fine. The codec is available at http://codeczone.virtualave.net/FXIMCAUD.zip. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From as at sci.fi Sat Jul 21 13:09:06 2001 From: as at sci.fi (Anssi Saari) Date: Sat, 21 Jul 2001 14:09:06 +0300 Subject: [Mplayer-users] Re: Bugreport-voodoo3 rh7.1 and xvideo In-Reply-To: <20010721105631.12359.qmail@web3903.mail.yahoo.com>; from adamrudolf@yahoo.com on Sat, Jul 21, 2001 at 03:56:31AM -0700 References: <20010721105631.12359.qmail@web3903.mail.yahoo.com> Message-ID: <20010721140906.B23355@sci.fi> On Sat, Jul 21, 2001 at 03:56:31AM -0700, Adam Bertil wrote: > When using mplayer -vo xv a.mpg > I used xfree and voodoo3 24bit but 16bit color same > thing happens. Xfree is orginal from Rh7.1 -version > 4.0.3. Isn't that the problem right there? See DOCS/VIDEOCARDS. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sat Jul 21 14:01:18 2001 From: arpi at thot.banki.hu (Arpi) Date: Sat, 21 Jul 2001 14:01:18 +0200 (CEST) Subject: [Mplayer-users] Intel Music Coder working In-Reply-To: <20010721140324.A23355@sci.fi> Message-ID: <200107211201.OAA53410@thot.banki.hu> Hi, > > Hi, > > I have a couple of old clips where the audio is in Intel's IMC format. After copying > the Windows driver to /usr/lib/win32 and putting > > driver acm > dll "imc32.acm" > > to codecs.conf in the IMC section, it seems to work just fine. The codec > is available at http://codeczone.virtualave.net/FXIMCAUD.zip. can you please upload some samples to ftp://mplayer.dev.hu ? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From as at sci.fi Sat Jul 21 14:53:47 2001 From: as at sci.fi (Anssi Saari) Date: Sat, 21 Jul 2001 15:53:47 +0300 Subject: [Mplayer-users] Re: Intel Music Coder working In-Reply-To: <200107211201.OAA53410@thot.banki.hu>; from arpi@thot.banki.hu on Sat, Jul 21, 2001 at 02:01:18PM +0200 References: <20010721140324.A23355@sci.fi> <200107211201.OAA53410@thot.banki.hu> Message-ID: <20010721155347.A27125@sci.fi> On Sat, Jul 21, 2001 at 02:01:18PM +0200, Arpi wrote: > can you please upload some samples to ftp://mplayer.dev.hu ? Ok. It's smut, I hope you don't mind. STsKlassFist-1a.avi. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Sat Jul 21 15:53:09 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Sat, 21 Jul 2001 15:53:09 +0200 Subject: [Mplayer-users] Divx4Linux confusion Message-ID: <200107211353.f6LDrCS06306@alison.hemmet.chalmers.se> Hi A'rpi and Sparky, I'm utterly confused. A'rpi, I guess you wrote the integration of DivX4Linux into Mplayer? I'm asking because I can't find any MEMORY_REQS step before initializing the codec. Was this procedure removed? If not, why does it work with mplayer? And if yes, why does PM's API tell me to (still) use it??? gruel -- Christoph Lampert, gruel at gmx.de "Linux is a cancer that attaches itself in an intellectual property sense to everything it touches. That's the way that the license works." - Steve Balmer "Epsilon < 0" - chl _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sat Jul 21 16:05:33 2001 From: arpi at thot.banki.hu (Arpi) Date: Sat, 21 Jul 2001 16:05:33 +0200 (CEST) Subject: [Mplayer-users] Divx4Linux confusion In-Reply-To: <200107211353.f6LDrCS06306@alison.hemmet.chalmers.se> Message-ID: <200107211405.QAA37222@thot.banki.hu> Hi, > Hi A'rpi and Sparky, > > I'm utterly confused. > > A'rpi, I guess you wrote the integration of DivX4Linux into Mplayer? > I'm asking because I can't find any MEMORY_REQS step before > initializing the codec. Was this procedure removed? > If not, why does it work with mplayer? And if yes, why does PM's API tell me > to (still) use it??? read it again. there is a note, saying that if pointers are NULL, then they will be allocated by the codec lib. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Sat Jul 21 16:35:54 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Sat, 21 Jul 2001 16:35:54 +0200 Subject: [Mplayer-users] Divx4Linux confusion In-Reply-To: <200107211405.QAA37222@thot.banki.hu> References: <200107211405.QAA37222@thot.banki.hu> Message-ID: <200107211435.f6LEZuD07020@alison.hemmet.chalmers.se> Am Samstag, 21. Juli 2001 16:05 schrieben Sie: > Hi, > > > Hi A'rpi and Sparky, > > > > I'm utterly confused. > > read it again. there is a note, saying that if pointers are NULL, then > they will be allocated by the codec lib. I'm even more confused... where is that note? My API is 25399 07-18-01 15:00 DivX 4.0 (Beta) API Documentation.txt dated >Version 4.0 (Beta) (Document Revision 1.0) >Released on 2001-07-18 and I really can't find anything like that (although it seems to work, now the decoder crashes later than before). The paragraph in API reads: >6.1. Initialization >Before initializing decore(), the application should allocate the data >structures. To do this, the application will call decore() setting >DEC_OPT_MEMORY_REQS as dec_opt. When DEC_OPT_MEMORY_REQS is set, the calling >thread needs to provide the input parameter (param1) pointing to a DEC_PARAM >data structure and the output parameter (param2) pointing to a DEC_MEM_REQS >structure. The two data structures mentioned are defined below. >[...] >The application must provide a meaningful param1 containing the correct >dimension of the frames. Decore will give back the application information >on the buffers. Data structure size is needed throughout param2. >At this point the application should allocate the required memory and then >initialize decore. The memory that decore will use is described in the >DEC_BUFFERS structure, defined as: >[...] >The decore initialization process starts when DEC_OPT_INIT is set at >dec_opt. The decore will initialize a new instance associated with handle. >When DEC_OPT_INIT is set, the calling thread needs to provide param1 >pointers to a valid DEC_PARAM data structure. In this case, param2 has no >meaning and should be set to NULL. > >Decore returns DEC_OK if the process is correct. Decore returns DEC_MEMORY >if there is memory allocation error. The example at the end uses MEMORY_REQS as well. There is also the already known "isKeyFrame" instead of "is_key_frame" error in this document. Maybe the ZIP I downloaded contains an outdated version? gruel _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Sat Jul 21 17:35:23 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Sat, 21 Jul 2001 17:35:23 +0200 Subject: [Mplayer-users] Translations Message-ID: <20010721173523.A1099@telia.com> I assume there is work going on to translate mplayer itself to other languages? I mean, there isn't much point in just having the documentation in other languages. -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From sven at kabelin.de Sat Jul 21 18:52:24 2001 From: sven at kabelin.de (Sven Kabelin) Date: Sat, 21 Jul 2001 18:52:24 +0200 Subject: [Mplayer-users] fbdev and scaling Message-ID: <3B59B348.2020206@kabelin.de> My video output is an ATI TV-Out composite.I use the frame buffer device to put pictures on tv, resolution is 640x480. Can I scale minor movies to full screen or it?s impossible to scale the movie over the fbdev. thx Sven _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Sat Jul 21 19:06:32 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Sat, 21 Jul 2001 19:06:32 +0200 Subject: [Mplayer-users] Files don't play with -idx, but without Message-ID: <200107211706.f6LH6Za10005@alison.hemmet.chalmers.se> Hi, I have two (broken?) DivX-AVis here which play normally though with a small error (chunksize...) and without index. But if I use -idx or -forceidx to generate an index, they fail to play: Win-DLL fails to load (could not open DLL???) -vc ffdivx and -vc divx4 even crash with a segfault. It does not happend with the first 1 or 10 MB... What is this? gruel ---------------------------------------------------- Reading /home/lampert/.mplayer/codecs.conf: 15 audio & 33 video codecs Font /home/lampert/.mplayer/font/font.desc loaded successfully! (140 chars) Detected AVI file format! ==> Found video stream: 0 ==> Found audio stream: 1 WARNING!!! chunksize=-16777216 (id=) AVI: Generated index table for 0 chunks! VIDEO: [DIV3] 640x272 24bpp 23.98 fps 694.3 kbps (84.8 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:640x272 fps:23.98 ftime:=0.0417 Detected audio codec: [mp3] drv:1 (MPEG layer-2, layer-3) dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer mp3lib: Processor ID: 580 mp3lib: Using Pentium optimized decore. AUDIO: srate=44100 chans=2 bps=2 sfmt=0x10 ratio: 16000->176400 Detected video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) Loading DLL: /usr/lib/win32/divx_c32.ax FAILED! DirectShow generic filter: FATAL: Could not open DirectShow DLL: divx_c32.ax at DS_Filter.cpp:83 ERROR: Couldn't open required DirectShow codec: divx_c32.ax Maybe you forget to upgrade your win32 codecs?? It's time to download the new package from: ftp://thot.banki.hu/esp-team/linux/MPlayer/w32codec.zip ! Or you should disable DShow support: make distclean;make -f Makefile.No-DS FATAL: Couldn't initialize video codec :( -- Christoph Lampert, gruel at gmx.de "Linux is a cancer that attaches itself in an intellectual property sense to everything it touches. That's the way that the license works." - Steve Balmer "Epsilon < 0" - chl _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lgb at lgb.hu Sat Jul 21 19:58:53 2001 From: lgb at lgb.hu (=?iso-8859-2?B?R+Fib3IgTOlu4XJ0?=) Date: Sat, 21 Jul 2001 19:58:53 +0200 Subject: [Mplayer-users] Translations In-Reply-To: <20010721173523.A1099@telia.com> Message-ID: <20010721195853.A22588@vega.digitel2002.hu> On Sat, Jul 21, 2001 at 05:35:23PM +0200, Andr? Dahlqvist wrote: > I assume there is work going on to translate mplayer itself to other > languages? I mean, there isn't much point in just having the documentation > in other languages. Why? It does not worth I think. I'm Hungarian but I hate Hungarian softwares. English is the language of computing. And mplayer does not contain too much language dependent parts ... You must launch mplayer first. You can rename mplayer to mlejatszo [for Hungarian :)] but why? Any other information needs to be translated: docs and sub support inside mplayer. And it's done or can be done easily. So what other info do you want to translate? --[ G?bor L?n?rt ]---[ Vivendi Telecom Hungary ]---------[ lgb at lgb.hu ]-- U have 8 bit comp or chip of them and it's unused or to be sold? Call me! -------[ +36 30 2270823 ]------> LGB <-----[ Linux/UNIX/8bit 4ever ]----- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Sat Jul 21 20:13:07 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Sat, 21 Jul 2001 20:13:07 +0200 Subject: [Mplayer-users] Translations In-Reply-To: <20010721195853.A22588@vega.digitel2002.hu> References: <20010721195853.A22588@vega.digitel2002.hu> Message-ID: <200107211813.f6LID9V12435@alison.hemmet.chalmers.se> Am Samstag, 21. Juli 2001 19:58 schrieben Sie: > On Sat, Jul 21, 2001 at 05:35:23PM +0200, Andr? Dahlqvist wrote: > > I assume there is work going on to translate mplayer itself to other > > languages? I mean, there isn't much point in just having the > > documentation in other languages. > > Why? It does not worth I think. I'm Hungarian but I hate Hungarian > softwares. English is the language of computing. And mplayer does not > contain too much language dependent parts ... You must launch mplayer > first. You can rename mplayer to mlejatszo [for Hungarian :)] but why? Any > other information needs to be translated: docs and sub support inside > mplayer. And it's done or can be done easily. So what other info do you > want to translate? He's right. When the GUI is there, it might be worth translating it in compatible way to as many languages as there are users. But for console-people like us english is okay, I guess. Let's rather include cool features like usable AVI writing and streaming etc. gruel _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sat Jul 21 20:57:46 2001 From: arpi at thot.banki.hu (Arpi) Date: Sat, 21 Jul 2001 20:57:46 +0200 (CEST) Subject: [Mplayer-users] Translations In-Reply-To: <20010721195853.A22588@vega.digitel2002.hu> Message-ID: <200107211857.UAA39800@thot.banki.hu> Hi, > On Sat, Jul 21, 2001 at 05:35:23PM +0200, Andr? Dahlqvist wrote: > > I assume there is work going on to translate mplayer itself to other > > languages? I mean, there isn't much point in just having the documentation > > in other languages. It's planned, but I dunno yet how. I hate locale/gettext stuff. I think that "help wizard" messages (for example: Did you copied codecs.conf to xyz? download codecs pack from ftp:... and install this way: ... ) should go to a new file, maybe a .h file defined as constants. configure should have an option to choosee language, and use the proper language helps.h file. But I agree with LGB in that normal program messages (like 'segmentation fault' :)) shouldn't be translated. > Why? It does not worth I think. I'm Hungarian but I hate Hungarian softwares. > English is the language of computing. And mplayer does not contain too > much language dependent parts ... You must launch mplayer first. You can > rename mplayer to mlejatszo [for Hungarian :)] but why? Any other information it's flej?tsz? :) (movie -> film. or do you mean movie -> mozg?k?p ? :)) > needs to be translated: docs and sub support inside mplayer. And it's done Agree. > or can be done easily. So what other info do you want to translate? I think that multi-line detailed help and hint messages should be translated too. later when GUI is integrated, they should be displayed in a nice window with an animated picture of a wizard :) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Sat Jul 21 21:12:47 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Sat, 21 Jul 2001 21:12:47 +0200 Subject: [Mplayer-users] Translations In-Reply-To: <20010721195853.A22588@vega.digitel2002.hu> References: <20010721195853.A22588@vega.digitel2002.hu> Message-ID: <20010721211247.A2518@telia.com> G?bor L?n?rt wrote: > Why? It does not worth I think. I'm Hungarian but I hate Hungarian softwares. > English is the language of computing. I couldn't agree more, which is why I don't have my locale set to Swedish. But why translate the documentation then? Either you translate it all or you translate nothing. I mean, stuff like mplayer --help output could be translated. -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sat Jul 21 21:27:10 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Sat, 21 Jul 2001 21:27:10 +0200 Subject: [Mplayer-users] fbdev and scaling In-Reply-To: <3B59B348.2020206@kabelin.de> References: <3B59B348.2020206@kabelin.de> Message-ID: <7038123889.20010721212710@gmx.de> Hello Sven, Saturday, July 21, 2001, 6:52:24 PM, you wrote: > My video output is an ATI TV-Out composite.I use the frame buffer > device to put pictures on tv, resolution is 640x480. > Can I scale minor movies to full screen or it?s impossible to scale the > movie over the fbdev. it'd be possible using software scalingg or writinfg a special device driver for your video card, but software scalign is very slow and writing driver for hardware needs good docs on hardware and someone to program driver. > thx > Sven -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sat Jul 21 21:28:22 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Sat, 21 Jul 2001 21:28:22 +0200 Subject: [Mplayer-users] Files don't play with -idx, but without In-Reply-To: <200107211706.f6LH6Za10005@alison.hemmet.chalmers.se> References: <200107211706.f6LH6Za10005@alison.hemmet.chalmers.se> Message-ID: <16938196293.20010721212822@gmx.de> Hello Christoph, Saturday, July 21, 2001, 7:06:32 PM, you wrote: > Hi, > I have two (broken?) DivX-AVis here which play normally though with a small > error (chunksize...) and without index. But if I use -idx or -forceidx to > generate an index, they fail to play: Win-DLL fails to load (could not open > DLL???) > -vc ffdivx and -vc divx4 even crash with a segfault. > It does not happend with the first 1 or 10 MB... > What is this? > gruel > ---------------------------------------------------- > Reading /home/lampert/.mplayer/codecs.conf: 15 audio & 33 video codecs > Font /home/lampert/.mplayer/font/font.desc loaded successfully! (140 chars) > Detected AVI file format! ==>> Found video stream: 0 ==>> Found audio stream: 1 > WARNING!!! chunksize=-16777216 (id=) > AVI: Generated index table for 0 chunks! > VIDEO: [DIV3] 640x272 24bpp 23.98 fps 694.3 kbps (84.8 kbyte/s) > [V] filefmt:3 fourcc:0x33564944 size:640x272 fps:23.98 ftime:=0.0417 > Detected audio codec: [mp3] drv:1 (MPEG layer-2, layer-3) > dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer > mp3lib: Processor ID: 580 > mp3lib: Using Pentium optimized decore. > AUDIO: srate=44100 chans=2 bps=2 sfmt=0x10 ratio: 16000->176400 > Detected video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) > Loading DLL: /usr/lib/win32/divx_c32.ax FAILED! > DirectShow generic filter: FATAL: Could not open DirectShow DLL: divx_c32.ax > at DS_Filter.cpp:83 > ERROR: Couldn't open required DirectShow codec: divx_c32.ax > Maybe you forget to upgrade your win32 codecs?? It's time to download the new > package from: ftp://thot.banki.hu/esp-team/linux/MPlayer/w32codec.zip ! > Or you should disable DShow support: make distclean;make -f Makefile.No-DS > FATAL: Couldn't initialize video codec :( imho this usually happens when important memory areas are overwritten. -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sat Jul 21 21:32:22 2001 From: atmosfear at users.sourceforge.net (=?koi8-r?B?RmVsaXggQthuZW1hbm4=?=) Date: Sat, 21 Jul 2001 21:32:22 +0200 Subject: [Mplayer-users] ffmpeg divx decoding problem In-Reply-To: References: Message-ID: <19738436578.20010721213222@gmx.de> Hello Nick, Saturday, July 21, 2001, 12:13:54 PM, you wrote: > Hi, Emmanuel Pacaud! > On 2001-07-20 10:11:53 you wrote: >>Salut, >> >>The new divx (ffmpeg) codecs doesn't work with one of my movies. This >>one plays fine with the win32 divx codec, but with ffmpeg divx, half of >>the screen is misrendered and mplayer complains with the message: >> >>MPlayer 0.17cvs-010708-16:16(C) 2000-2001 Arpad Gereoffy >> >>... >>Error while decoding frame! A-V: 0.000 ct: 0.071 49 11% 3% 3.5% >>7 >> >>I've just uploaded a part of that file on >>ftp://thot.banki.hu/MPlayer/incoming/. This file is named bugs_life.avi. >> > I've found there nothing! > Could you upload it on ftp://mplayer.dev.hu? it's apparently video which height is not a multiple of 16, check badmacroblock video under MPHQ MPlayer/incoming/divx4beta/ to see what I mean! > Best regards! Nick (2001-07-21 10:13:06) -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Sat Jul 21 21:36:53 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Sat, 21 Jul 2001 21:36:53 +0200 Subject: [Mplayer-users] Translations In-Reply-To: <20010721211247.A2518@telia.com>; from andre.dahlqvist@telia.com on Sat, Jul 21, 2001 at 09:12:47PM +0200 References: <20010721195853.A22588@vega.digitel2002.hu> <20010721211247.A2518@telia.com> Message-ID: <20010721213653.A5438@woodstock.localdomain> It's the Question that drives us, Andr? Dahlqvist : > or you translate nothing. Nothing? Good idea, I hate to translate DOCS to hungarian anyways :) -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From atmosfear at users.sourceforge.net Sat Jul 21 21:31:20 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Sat, 21 Jul 2001 21:31:20 +0200 Subject: [Mplayer-users] Re: video output In-Reply-To: <01072021525600.06515@line72.plano1.tx.home.com> References: <01072021525600.06515@line72.plano1.tx.home.com> Message-ID: <1838373848.20010721213120@gmx.de> Hello Mark, Saturday, July 21, 2001, 4:52:56 AM, you wrote: > Hello Arpi, > Friday, July 20, 2001, 9:10:33 PM, you wrote: >> Hi, >>> I have a 1.2 gig athlon and a geforce 3 card. Mplayer has been working >>> great, but yesterday, i hooked my computer up to my tv through the geforce > 3 >>> s-video out. When i did this, mplayer wouldn't let my run my movies with > -vo >>> xv which is what i usually use because it's fastest. x11 and sdl seemed > to >>> slow to run full screen at 800x600 ( the video kept laggin). I then > triedm >>> fsdga which worked great except it doesn't actually fill up the full > screen. >>> Mplayer takes over full screen but the actually video size is probably > only >>> half the size of the screen. any ideas? >>> >> >> nvidia sucks... >> >> Xv usually doesn't work on TV-out ports. >> it's a special thing, handled by DAC chips. >> TV-out doesn't support YUV overlays. >> (there is a trick for matrox g400 to swap heads, this way you can route >> signal from DAC to TV-out... but it's a horrible hack) >> about fsdga: it's obsoleted, and very buggy. >> use -vo sdl if you want full-screen with software scaling. > and use -vo sdl:dga then, it's apparently fastest with software > scaling. >> A'rpi / Astral & ESP-team > -vo sdl:dga doesn't work. I have MPlayer 0.17cvs-010620-18:14, do i need to > newer version for it ? do you have graphics card with dga support, sdl compiled with dga support? > Mark -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Sat Jul 21 21:50:22 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Sat, 21 Jul 2001 21:50:22 +0200 Subject: [Mplayer-users] Translations In-Reply-To: <20010721213653.A5438@woodstock.localdomain> References: <20010721195853.A22588@vega.digitel2002.hu> <20010721211247.A2518@telia.com> <20010721213653.A5438@woodstock.localdomain> Message-ID: <20010721215022.A3332@telia.com> Gabucino wrote: > Nothing? Good idea, I hate to translate DOCS to hungarian anyways :) Because if a user can understand the mplayer --help output (which is needed to use mplayer with good result) then he has enough english skills to read the documentation in english too. -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sat Jul 21 21:51:29 2001 From: arpi at thot.banki.hu (Arpi) Date: Sat, 21 Jul 2001 21:51:29 +0200 (CEST) Subject: [Mplayer-users] Translations In-Reply-To: <20010721215022.A3332@telia.com> Message-ID: <200107211951.VAA32738@thot.banki.hu> Hi, > Gabucino wrote: > > > Nothing? Good idea, I hate to translate DOCS to hungarian anyways :) > > Because if a user can understand the mplayer --help output (which is needed there is a great manpage containing output --help and much more. and it's at DOCS/... but I agree in that help should be translated too. btw, what translation are you working on??? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Sat Jul 21 22:13:19 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Sat, 21 Jul 2001 22:13:19 +0200 Subject: [Mplayer-users] Translations In-Reply-To: <200107211951.VAA32738@thot.banki.hu> References: <200107211951.VAA32738@thot.banki.hu> Message-ID: <20010721221319.A3581@telia.com> Arpi wrote: > btw, what translation are you working on??? None, because I think sofware should be in english. -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Sat Jul 21 23:16:30 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Sat, 21 Jul 2001 23:16:30 +0200 Subject: [Mplayer-users] mp4 (quicktime mov) file format Message-ID: <200107212116.f6LLGXa32538@alison.hemmet.chalmers.se> Hi A'rpi! Is there support for the .mp4 QuickTime format planned? It guess it's documented, there's open source stuff and examples from MPEG4IP. $ file ducks_divx_200_mp3_64.mp4: Apple QuickTime movie file (mdat) Since playing MPEG4 contents is no problem, I thought I'd ask... gruel -- Christoph Lampert, gruel at gmx.de "Linux is a cancer that attaches itself in an intellectual property sense to everything it touches. That's the way that the license works." - Steve Balmer "Epsilon < 0" - chl _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Sat Jul 21 23:12:15 2001 From: kinali at gmx.net (Attila Kinali) Date: Sat, 21 Jul 2001 23:12:15 +0200 Subject: [Mplayer-users] manpage: clarifying vc/vfm ac/afm Message-ID: Hi, I just had a look to the manpage of mplayer. I saw that vc, vfm, ac and afm are explained there, but not what the difference is between them. (ie that one has a fallback feature and the other does not etc) I think that should be in the manpage too. I also don't understand what the exact difference between a codec and a codec familiy is according to the manpage. Attila Kianli -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sat Jul 21 23:18:11 2001 From: arpi at thot.banki.hu (Arpi) Date: Sat, 21 Jul 2001 23:18:11 +0200 (CEST) Subject: [Mplayer-users] mp4 (quicktime mov) file format In-Reply-To: <200107212116.f6LLGXa32538@alison.hemmet.chalmers.se> Message-ID: <200107212118.XAA30774@thot.banki.hu> Hi, > Hi A'rpi! > > Is there support for the .mp4 QuickTime format planned? It guess it's > documented, there's open source stuff and examples from MPEG4IP. > > $ file ducks_divx_200_mp3_64.mp4: Apple QuickTime movie file (mdat) yes, as soon as quicktime demuxer is finished in mplayer. > Since playing MPEG4 contents is no problem, I thought I'd ask... i'm unsure... opendivx != mpeg4. real mpeg4 uses B frames too. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Sat Jul 21 23:26:18 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Sat, 21 Jul 2001 23:26:18 +0200 Subject: [Mplayer-users] manpage: clarifying vc/vfm ac/afm In-Reply-To: ; from kinali@gmx.net on Sat, Jul 21, 2001 at 11:12:15PM +0200 References: Message-ID: <20010721232618.A5690@woodstock.localdomain> It's the Question that drives us, Attila Kinali : > I also don't understand what the exact difference between Don't worry, neither the manpage writer does ;) -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From arpi at thot.banki.hu Sat Jul 21 23:23:16 2001 From: arpi at thot.banki.hu (Arpi) Date: Sat, 21 Jul 2001 23:23:16 +0200 (CEST) Subject: [Mplayer-users] manpage: clarifying vc/vfm ac/afm In-Reply-To: Message-ID: <200107212123.XAA34092@thot.banki.hu> Hi, > I just had a look to the manpage of mplayer. > I saw that vc, vfm, ac and afm are explained there, > but not what the difference is between them. > (ie that one has a fallback feature and the other does not etc) > I think that should be in the manpage too. > I also don't understand what the exact difference between > a codec and a codec familiy is according to the manpage. codec is the decoder program for a given format. for example divx. codec family is a group of such codecs, implemented by the same library. for example, codec family is VfW, DShow and ffmpeg. there are many format supported by codecs implemented in ffmpeg's libavcodec. you can select a given codec with -vc (for example: -vc ffdivx) or a family of them (-vfm 6) yes, we should use driver names instead of numbers with -afm/-vfm al3x already did a patch for this, but it was rejected, because of messing up driver codes and changed other things too. i'll fix it while moving demuxer stuff to new place. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Sat Jul 21 23:30:08 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Sat, 21 Jul 2001 23:30:08 +0200 Subject: [Mplayer-users] mp4 (quicktime mov) file format In-Reply-To: <200107212118.XAA30774@thot.banki.hu> References: <200107212118.XAA30774@thot.banki.hu> Message-ID: <200107212130.f6LLUAC01476@alison.hemmet.chalmers.se> > > > > Is there support for the .mp4 QuickTime format planned? It guess it's > > documented, there's open source stuff and examples from MPEG4IP. > > yes, as soon as quicktime demuxer is finished in mplayer. > > > Since playing MPEG4 contents is no problem, I thought I'd ask... > > i'm unsure... opendivx != mpeg4. > real mpeg4 uses B frames too. No, MPEG4 defines different profiles. OpenDivX (and DivX4) implements the "Simple Profile" which has no B-frames. B-frames are part of "Main Profile" (and up), but this has and many many other things, as well. I don't know of any running codec that is compliant with the "Main Profile". I doubt you will find any such contents at the moment. gruel -- Christoph Lampert, gruel at gmx.de "Linux is a cancer that attaches itself in an intellectual property sense to everything it touches. That's the way that the license works." - Steve Balmer "Epsilon < 0" - chl _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sat Jul 21 23:31:54 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Sat, 21 Jul 2001 23:31:54 +0200 Subject: [Mplayer-users] manpage: clarifying vc/vfm ac/afm In-Reply-To: References: Message-ID: <8945608561.20010721233154@gmx.de> Hello Attila, Saturday, July 21, 2001, 11:12:15 PM, you wrote: > Hi, > I just had a look to the manpage of mplayer. > I saw that vc, vfm, ac and afm are explained there, > but not what the difference is between them. > (ie that one has a fallback feature and the other does not etc) > I think that should be in the manpage too. > I also don't understand what the exact difference between > a codec and a codec familiy is according to the manpage. codec family is a specific codec library like libmpeg2, ffmpehs libavcodec, dshow, vfw loqader, opendivbx decore, codec is a spec ific codec, like ffmpegs ms mpeg4 v3 decoder (ffdivx= or dhsows indeo 5 codec. > Attila Kianli -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From luca at lucarella.com.ar Sun Jul 22 00:53:28 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Sat, 21 Jul 2001 19:53:28 -0300 (ART) Subject: [Mplayer-users] subtitles go unsyncronized in about an hour In-Reply-To: <200107210011.CAA29530@thot.banki.hu> References: <200107210011.CAA29530@thot.banki.hu> Message-ID: <200107212356.TAA03200@burns.luca.2y.net> El Sat, 21 Jul 2001 02:11:28 +0200 (CEST) Arpi escribi?: A> Hi, A> A> > > A> > Hi, I saw there are some questions/bugs about subtitles and it's my time to A> > > A> > speak. I'm having some problems with the syncronization. The problem is A> > > A> > that with a lot of filmes, the subtitles works just fine but when it played A> > > A> > about and hour, the subtitles starts to go unsyncronized, if I'm not wrong, A> > > A> > they appear later (I mean, first is the voice, then the subtitles). I have A> > > A> > to put them back in sync with 'x' (or 'z') but the keep going slower and I A> > > A> > must keep doing the 'x' press, about once every 5-10 minutes. A> > > A> Hmm. Is it ok at the first hour? A> > > A> I think it's a math precision problem. I got similar thing with -bps option, A> > > A> until i changed float to double. I'll review subtitle code. A> > > A> > > I use always -bps (don't remember why I add it to ~/.mplayer/config). If I A> > > use -ss 3600 (for start playing at the first hour) the subtitles works A> > > well, (for 5-10 minutes as when I play the complete movie) so is not a A> > > -subfps problem. A> > No, it is time counter problem. A> > I saw (for -bps) that x+x+x+x+x differs _a_lot_ from 5*x, if i'm using A> > float. (of course not 5, it's summed about 50000 times). A> > I got near perfect result (no big difference between multiplied and summed) A> > for a long period and at a given point the difference began to increasing. A> > Maybe because of using gcc -mfast-math ? With double it's ok. A> A> Ok, it's fixed now in CVS. A> I changed incremental (v_pts+=frame_time) v_pts calculation to A> multiplicative (v_pts=frame_no*frame_time). SHould work better now. A> A> Please try it and tell me the results. I'll do. Now I have to remember where the movie is... ;) -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Sun Jul 22 01:07:25 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Sun, 22 Jul 2001 01:07:25 +0200 Subject: [Mplayer-users] Another bad file? Message-ID: <20010722010724.A5682@telia.com> I came across a file which mplayer has trouble handling. After playing for around 1 minute and 30 seconds mplayer starts spamming my xterm with an endless loop of these: ChunkID mismatch! raw=0?<88><8A> idx=01wb Should I upload this file (I will have to upload it all, because when I tried to play parts of it it it didn't show the same behaviour) and also provide mplayer -v output, or is this a known bug? -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 22 01:27:41 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 22 Jul 2001 01:27:41 +0200 (CEST) Subject: [Mplayer-users] Another bad file? In-Reply-To: <20010722010724.A5682@telia.com> Message-ID: <200107212327.BAA45832@thot.banki.hu> Hi, > I came across a file which mplayer has trouble handling. After playing for > around 1 minute and 30 seconds mplayer starts spamming my xterm with an > endless loop of these: > > ChunkID mismatch! raw=0?<88><8A> idx=01wb > > Should I upload this file (I will have to upload it all, because when I > tried to play parts of it it it didn't show the same behaviour) and also > provide mplayer -v output, or is this a known bug? known, but not really bug. you have a file with damaged index table. just use -forceidx or -noidx option of mplayer! it will ignore or re-build index table of this avi. btw this should go to the FAQ, this was the 3rd time answering this... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Sun Jul 22 02:03:24 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Sun, 22 Jul 2001 02:03:24 +0200 Subject: [Mplayer-users] Another bad file? In-Reply-To: <200107212327.BAA45832@thot.banki.hu> References: <200107212327.BAA45832@thot.banki.hu> Message-ID: <20010722020324.A6312@telia.com> Arpi wrote: > known, but not really bug. you have a file with damaged index table. > just use -forceidx or -noidx option of mplayer! > it will ignore or re-build index table of this avi. That worked around the endless loop, but now the movie quits after 00:01:40 saying End Of File. This isn't true since this is an entire movie 703 megs large. This happens with both -forceidx and -noidx. Thanks for the quick response, -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From line72 at home.com Sun Jul 22 03:27:45 2001 From: line72 at home.com (Mark D'voo) Date: Sat, 21 Jul 2001 20:27:45 -0500 Subject: [Mplayer-users] -vo sdl:dga problems Message-ID: <01072120274500.21957@line72.plano1.tx.home.com> I'm trying to watch movies on my tv through the s-video out in my geforce 3 card. When i do a -vo sdl:dga the movie goes fullscreen but shakes up and down really badly. Any ideas ? mark _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 22 13:14:14 2001 From: atmosfear at users.sourceforge.net (=?ISO-8859-1?B?RmVsaXggQvxuZW1hbm4=?=) Date: Sun, 22 Jul 2001 13:14:14 +0200 Subject: [Mplayer-users] -vo sdl:dga problems In-Reply-To: <01072120274500.21957@line72.plano1.tx.home.com> References: <01072120274500.21957@line72.plano1.tx.home.com> Message-ID: <1394947667.20010722131414@gmx.de> Hello Mark, Sunday, July 22, 2001, 3:27:45 AM, you wrote: > I'm trying to watch movies on my tv through the s-video out in my geforce 3 > card. When i do a -vo sdl:dga the movie goes fullscreen but shakes up and > down really badly. Any ideas ? shakes up and down? I can only think of bad refreshrate. NTSC TV should be used at max 800x600 (better 640x480) and 60Hz PAL TV same res but 50Hz refreshrate. (sdl automatically switches resolutions so take care of that) > mark -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 22 13:41:21 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 22 Jul 2001 13:41:21 +0200 Subject: [Mplayer-users] Fwd: Korrektur zu Ihrem Artikel ueber DVD-Player unter Linux (ENG: Correction to your article about DVD-Players on linux) Message-ID: <14296575538.20010722134121@gmx.de> Hi, I've just send the following mail to c't to clarify things. This is a forwarded message From: Felix B?nemann To: ct at heise.de Date: Sunday, July 22, 2001, 1:29:56 PM Subject: Korrektur zu Ihrem Artikel ueber DVD-Player unter Linux ===8<==============Original message text=============== Sehr geehrte c't Redaktion, ich bin einer der MPlayer-Entwickler und m?chte deswegen folgende fehlaussage in Ihrem Artikel ?ber DVD-Player unter Linux klarstellen: Sie schreiben dort ?ber MPlayer, dass er die Auswahl eines VOB Audiostreams nicht erlaubt. Diese Aussage ist falsch. Der Audiodatenstrom kann via des -aid Kommandozeilenparameters gew?hlt werden, wie es auch unter DOCS/DVD sowie DOCS/DVD-FAQ beschrieben ist. Ich bitte um Richtigstellung dieses Faktes. (Mein Name ist in der Datei DOCS/AUTHORS aufgef?hrt.) -- Mit freundlichen Gr??en, Felix mailto:atmosfear at users.sourceforge.net ===8<===========End of original message text=========== Very rough translation: RTFM!!! =) More precise translation: I'm one of the MPlayer developers and that'S why I want to clarify the following wrong statement in your article: You wrote about MPlayer, that it doesn't allow the selection of a VOBs audiostream. This statement is wrong. The audiostream can be selected using the -aid commandline switch, like described under DOCS/DVD aswell as DOCS/DVD-FAQ. I would like you to correct this fact. (My name is listed in the file DOCS/AUTHORS.) -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Sun Jul 22 13:56:42 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Sun, 22 Jul 2001 13:56:42 +0200 Subject: [Mplayer-users] Fwd: Korrektur zu Ihrem Artikel ueber DVD-Player unter Linux (ENG: Correction to your article about DVD-Players on linux) In-Reply-To: <14296575538.20010722134121@gmx.de> References: <14296575538.20010722134121@gmx.de> Message-ID: <200107221156.f6MBuiK01183@alison.hemmet.chalmers.se> Am Sonntag, 22. Juli 2001 13:41 schrieben Sie: > Hi, > > I've just send the following mail to c't to clarify things. > [...] Boy, you sound like an angry lawer... you shouldn't have used such a official and "harsh" language, instead just tell about -aid in your normal words. Maybe you should write a second mail, marking the last one as a "joke". I'm quite sure they won't react with a positive correction to it. gruel _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 22 14:34:37 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 22 Jul 2001 14:34:37 +0200 Subject: [Mplayer-users] Fwd: Korrektur zu Ihrem Artikel ueber DVD-Player unter Linux (ENG: Correction to your article about DVD-Players on linux) In-Reply-To: <200107221156.f6MBuiK01183@alison.hemmet.chalmers.se> References: <14296575538.20010722134121@gmx.de> <200107221156.f6MBuiK01183@alison.hemmet.chalmers.se> Message-ID: <4299771363.20010722143437@gmx.de> Hello Christoph, Sunday, July 22, 2001, 1:56:42 PM, you wrote: > Am Sonntag, 22. Juli 2001 13:41 schrieben Sie: >> Hi, >> >> I've just send the following mail to c't to clarify things. >> [...] > Boy, you sound like an angry lawer... you shouldn't have used such a official > and "harsh" language, instead just tell about -aid in your normal words. > Maybe you should write a second mail, marking the last one as a "joke". > I'm quite sure they won't react with a positive correction to it. na, I won't write a mail and then mark it as a joke, but I don't see what's wrong with it. Of course it's more bussiness-style mail, not like I usually write, but I don't think I sound angry :) Should I've written something like Your article is wrong about selecting audio stream in vobs, RTFM DOCS/DVD* ? > gruel -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Sun Jul 22 14:51:21 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Sun, 22 Jul 2001 14:51:21 +0200 Subject: [Mplayer-users] Fwd: Korrektur zu Ihrem Artikel ueber DVD-Player unter Linux In-Reply-To: <4299771363.20010722143437@gmx.de> References: <14296575538.20010722134121@gmx.de> <200107221156.f6MBuiK01183@alison.hemmet.chalmers.se> <4299771363.20010722143437@gmx.de> Message-ID: <200107221251.f6MCpMr01354@alison.hemmet.chalmers.se> Hi Felix, > > Boy, you sound like an angry lawer... you shouldn't have used such a > > official and "harsh" language, instead just tell about -aid in your > > normal words. Maybe you should write a second mail, marking the last one > > as a "joke". I'm quite sure they won't react with a positive correction > > to it. > > na, I won't write a mail and then mark it as a joke, but I don't see > what's wrong with it. Of course it's more bussiness-style mail, not > like I usually write, but I don't think I sound angry :) > Should I've written something like Your article is wrong about > selecting audio stream in vobs, RTFM DOCS/DVD* ? No, but the language is somewhat... well... it's sounds like a typical "Gegendarstellung" (english word???) in a newpaper. I guess it's the "You wrote ... This statement is wrong." sentence that I don't like. A simple "Hi! ... when you wrote... you overlooked the option -aid to set .... " would have better suited into the environment. But never mind, we'll see on next friday if anything happens. gruel -- Christoph Lampert, gruel at gmx.de "Linux is a cancer that attaches itself in an intellectual property sense to everything it touches. That's the way that the license works." - Steve Balmer "Epsilon < 0" - chl _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Sun Jul 22 15:03:55 2001 From: kinali at gmx.net (Attila Kinali) Date: Sun, 22 Jul 2001 15:03:55 +0200 Subject: [Mplayer-users] DVD playback (article in c't) In-Reply-To: <200107200846.KAA21782@thot.banki.hu> References: <200107200846.KAA21782@thot.banki.hu> Message-ID: On Fri, 20 Jul 2001 10:46:51 +0200 (CEST) Arpi wrote: > yes, a little bit. I've learned german for 6 years, but it was 8 > years ago :( > btw my second question will be 'who translates this?' :) I can translate it to english (sorry, dont know any hungary :-) But I stopped buying c't a few years ago when they started to get an windows magazin with just a few good articels per year. So i need some scans. Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 22 15:01:19 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 22 Jul 2001 15:01:19 +0200 Subject: [Mplayer-users] Fwd: Korrektur zu Ihrem Artikel ueber DVD-Player unter Linux (ENG: Correction to your article about DVD-Players on linux) In-Reply-To: <200107221156.f6MBuiK01183@alison.hemmet.chalmers.se> References: <14296575538.20010722134121@gmx.de> <200107221156.f6MBuiK01183@alison.hemmet.chalmers.se> Message-ID: <76101373577.20010722150119@gmx.de> Hello Christoph, Sunday, July 22, 2001, 1:56:42 PM, you wrote: > Am Sonntag, 22. Juli 2001 13:41 schrieben Sie: >> Hi, >> >> I've just send the following mail to c't to clarify things. >> [...] > Boy, you sound like an angry lawer... you shouldn't have used such a official > and "harsh" language, instead just tell about -aid in your normal words. > Maybe you should write a second mail, marking the last one as a "joke". > I'm quite sure they won't react with a positive correction to it. I've thought again about it and think you are right, it sounds quite harsh with the short sentences and stuff so I wrote short mail, quoting: > ich bitte den, im Nachinein gesehen, etwas harschen Ton meiner > vorherigen Mail zu entschuldigen und bitte freundlich um > Korrektur Ihrer Aussage. (rough translation for english readers, I say sorry for harsh sound of my last mail and would like them to correct their staement.) Btw. Wouldn't I make up a good lawyer? =)) > gruel -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Sun Jul 22 15:11:33 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Sun, 22 Jul 2001 15:11:33 +0200 Subject: [Mplayer-users] Fwd: Korrektur zu Ihrem Artikel ueber DVD-Player unter Linux (ENG: Correction to your article about DVD-Players on linux) In-Reply-To: <76101373577.20010722150119@gmx.de> References: <14296575538.20010722134121@gmx.de> <200107221156.f6MBuiK01183@alison.hemmet.chalmers.se> <76101373577.20010722150119@gmx.de> Message-ID: <200107221311.f6MDBgd02752@alison.hemmet.chalmers.se> Hi Felix, > [...] > Btw. Wouldn't I make up a good lawyer? =)) A grrrrrrrrrrrrrrrrrrrrrrrrrrrrreat one! gruel -- Christoph Lampert, gruel at gmx.de "Linux is a cancer that attaches itself in an intellectual property sense to everything it touches. That's the way that the license works." - Steve Balmer "Epsilon < 0" - chl _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Sun Jul 22 15:11:53 2001 From: kinali at gmx.net (Attila Kinali) Date: Sun, 22 Jul 2001 15:11:53 +0200 Subject: [Mplayer-users] broken movie? In-Reply-To: <20010718231152.52605489.rpbrown@xtra.co.nz> References: <200107180853.KAA42184@thot.banki.hu> <20010718231152.52605489.rpbrown@xtra.co.nz> Message-ID: On Wed, 18 Jul 2001 23:11:52 +1200 mdew wrote: > a few weeks ago i ripped a DVD onto my hdd..and for somereason, > one of the vobs has a br0k3n track, once mplayer hit the br0k3n > track in the vob...everything slowed down, the FPS of the movie >was sooo slloooww.. sure that was a few weeks ago, so mplayer couldve changed. What does slow mean ? 1 or 2 frames per sec ? If yes. try one of the 0.18 pre releases. This bug should be fixed. If not, please read DOCS/BUGREPORTS and submit a usefull bugreport. Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From falk at lunat23.de Sat Jul 21 01:48:38 2001 From: falk at lunat23.de (Falk Schubert) Date: Sat, 21 Jul 2001 01:48:38 +0200 Subject: [Mplayer-users] libac3 and sse In-Reply-To: <0107132137080D.04350@astral> References: <20010713211507.7735e9b9.falk@lunat23.de> <0107132137080D.04350@astral> Message-ID: <20010721014838.3070b144.falk@lunat23.de> On Fri, 13 Jul 2001 21:37:08 +0200 > hmm, can you please send you /proc/cpuinfo and kernel version? > (cat /proc/cpuinfo and uname -a (hmm or did you write already it's 2.4.6, > then don't need it of course) > And did you compile your kernel for the correct cpu type? (I think it should > also work if not, but not 100% sure) The following lines are from boot-time: > CPU: Pentium III/Pentium III Xeon/Celeron (701.59-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x686 Stepping = 6 > Features=0x383f9ff PAT,PSE36,MMX,FXSR,SSE> And this is my system's info: > FreeBSD helium 4.3-STABLE FreeBSD 4.3-STABLE #7: Mon Jul 16 20:13:56 > CEST 2001 falk at helium:/usr/obj/usr/src/sys/HELIUM i386 I am not quite sure what exactly bothers mplayer...either the sse support or libac3....but it only crashes when playing ac3 audio encoded avi-files....with mp3 there are no probs and the pics are nice and fast;) falk -- enjoy your day! Falk Schubert Joellenbeckerstr. 287 33613 Bielefeld _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dbloms at suse.de Sun Jul 22 15:45:59 2001 From: dbloms at suse.de (Dieter Bloms) Date: Sun, 22 Jul 2001 15:45:59 +0200 Subject: [Mplayer-users] How to pipe the ac3 data through an external program like ac3play ? Message-ID: <20010722154559.B18099@suse.de> Hi, I've created a avi-file with divx video and ac3 tone. If I use the -dumpaudio option, I get a file stream.dump, which I can play with ac3play and get dolby digital sound. If I try to pipe the ac3 data to a file during playing the avi file, I don't get any ac3 data (ac3play says "CRC failed"). I want to pipe this data in a pipedevice, so ac3play can play it during watching the video. the command I tried it: mplayer -vo x11 -ao pcm -nowaveheader mydivx.avi my codecs.conf --snip-- audiocodec pcm info "Uncompressed PCM" status working ; format 0x1 ;;;; these are for hardware support only: (alaw,ulaw,ima-adpcm,mpeg,ac3) ; format 0x6 ; format 0x7 ; format 0x11 ; format 0x50 format 0x2000 ;;;; driver dvdpcm dll "uncompressed" --snip-- Does anybody have successfully get the ac3data ? BTW.: I'm using mplayer 0.18pre5 and ac3play-0.4.0 -- Mit freundlichen Gruessen, Dieter Bloms (Dieter.Bloms at suse.de) -------------------------------------------------------------------- SuSE Linux Solutions AG, Tel: +49-911-74053653 Schanzaeckerstr. 10, Fax: +49-911-74053674 90443 Nuernberg, Email: Dieter.Bloms at suse.de Germany WWW: http://www.suse.de -------------------------------------------------------------------- Key fingerprint = C54E EAD2 784A 5402 C4E4 A58A 414A AEA1 9038 7583 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 246 bytes Desc: not available URL: From atmosfear at users.sourceforge.net Sun Jul 22 16:51:03 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 22 Jul 2001 16:51:03 +0200 Subject: [Mplayer-users] DVD playback (article in c't) In-Reply-To: References: <200107200846.KAA21782@thot.banki.hu> Message-ID: <86107957184.20010722165103@gmx.de> Hello Attila, Sunday, July 22, 2001, 3:03:55 PM, you wrote: > On Fri, 20 Jul 2001 10:46:51 +0200 (CEST) Arpi wrote: >> yes, a little bit. I've learned german for 6 years, but it was 8 >> years ago :( >> btw my second question will be 'who translates this?' :) > I can translate it to english (sorry, dont know any hungary :-) > But I stopped buying c't a few years ago when they started to get > an windows magazin with just a few good articels per year. > So i need some scans. it's already on the list an translated (only part about mplayer). > Attila Kinali -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 22 16:55:43 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 22 Jul 2001 16:55:43 +0200 Subject: [Mplayer-users] libac3 and sse In-Reply-To: <20010721014838.3070b144.falk@lunat23.de> References: <20010713211507.7735e9b9.falk@lunat23.de> <0107132137080D.04350@astral> <20010721014838.3070b144.falk@lunat23.de> Message-ID: <170108236876.20010722165543@gmx.de> Hello Falk, Saturday, July 21, 2001, 1:48:38 AM, you wrote: > On Fri, 13 Jul 2001 21:37:08 +0200 >> hmm, can you please send you /proc/cpuinfo and kernel version? >> (cat /proc/cpuinfo and uname -a (hmm or did you write already it's > 2.4.6, >> then don't need it of course) >> And did you compile your kernel for the correct cpu type? (I think it > should >> also work if not, but not 100% sure) > The following lines are from boot-time: >> CPU: Pentium III/Pentium III Xeon/Celeron (701.59-MHz 686-class CPU) >> Origin = "GenuineIntel" Id = 0x686 Stepping = 6 >> > Features=0x383f9ff> PAT,PSE36,MMX,FXSR,SSE> > And this is my system's info: >> FreeBSD helium 4.3-STABLE FreeBSD 4.3-STABLE #7: Mon Jul 16 20:13:56 >> CEST 2001 falk at helium:/usr/obj/usr/src/sys/HELIUM i386 > I am not quite sure what exactly bothers mplayer...either the sse support > or libac3....but it only crashes when playing ac3 audio encoded > avi-files....with mp3 there are no probs and the pics are nice and fast;) have you tried compiling mplayer with ./configure --disable-sse ? And please tell what signal you get when mplayer crashes (ie. 11 SEGFAULT, 4 SIGILL). > falk -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 22 16:58:31 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 22 Jul 2001 16:58:31 +0200 Subject: [Mplayer-users] broken movie? In-Reply-To: References: <200107180853.KAA42184@thot.banki.hu> <20010718231152.52605489.rpbrown@xtra.co.nz> Message-ID: <124108405388.20010722165831@gmx.de> Hello Attila, Sunday, July 22, 2001, 3:11:53 PM, you wrote: > On Wed, 18 Jul 2001 23:11:52 +1200 mdew wrote: >> a few weeks ago i ripped a DVD onto my hdd..and for somereason, >> one of the vobs has a br0k3n track, once mplayer hit the br0k3n >> track in the vob...everything slowed down, the FPS of the movie >>was sooo slloooww.. sure that was a few weeks ago, so mplayer couldve changed. > What does slow mean ? 1 or 2 frames per sec ? > If yes. try one of the 0.18 pre releases. This bug should be fixed. > If not, please read DOCS/BUGREPORTS and submit a usefull bugreport. Btw. I've seen a DVD were one of the main movies VOBS had an incorrect samplingrate (in fact it was same sampling rate as others), guess it was a sort of copyprotection, as in sectorbased reading this wouldn't cause any problems. > Attila Kinali -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 22 17:05:17 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 22 Jul 2001 17:05:17 +0200 Subject: [Mplayer-users] How to pipe the ac3 data through an external program like ac3play ? In-Reply-To: <20010722154559.B18099@suse.de> References: <20010722154559.B18099@suse.de> Message-ID: <4108811552.20010722170517@gmx.de> Hello Dieter, Sunday, July 22, 2001, 3:45:59 PM, you wrote: > Hi, > I've created a avi-file with divx video and ac3 tone. > If I use the -dumpaudio option, I get a file stream.dump, which I can > play with ac3play and get dolby digital sound. > If I try to pipe the ac3 data to a file during playing the avi file, I > don't get any ac3 data (ac3play says "CRC failed"). > I want to pipe this data in a pipedevice, so ac3play can play it during > watching the video. > the command I tried it: > mplayer -vo x11 -ao pcm -nowaveheader mydivx.avi > my codecs.conf > --snip-- > audiocodec pcm > info "Uncompressed PCM" > status working > ; format 0x1 > ;;;; these are for hardware support only: > (alaw,ulaw,ima-adpcm,mpeg,ac3) > ; format 0x6 > ; format 0x7 > ; format 0x11 > ; format 0x50 > format 0x2000 > ;;;; > driver dvdpcm > dll "uncompressed" > --snip-- sorry but pcm codec in codecs.conf and -ao pcm are two totally different things, one defines what library to use for playing back pcm data in a video the other one selects the audio out plugin which dumps data to a raw pcm/wave file. And if you use -ao pcm ac3 sound gets first decodec by libac3 which also does downmix to stereo, so the pcm file you get is stereo only and of no use for ac3play. -dumpaudio directly dumps the compressed ac3 data. > Does anybody have successfully get the ac3data ? the right thing to achieve this imho is to build ac3play code as an alternative (to libac3) ac3 codec for mplayer. > BTW.: I'm using mplayer 0.18pre5 and ac3play-0.4.0 -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From cyrax at nerd.dk Sun Jul 22 17:11:24 2001 From: cyrax at nerd.dk (Mark =?ISO-8859-1?Q?Gj=F8l?=) Date: Sun, 22 Jul 2001 17:11:24 +0200 Subject: [Mplayer-users] Keep aspect ratio Message-ID: <3B5AED1C.1000007@nerd.dk> Is there a keep aspect ratio feature in mplayer? It's of great annoiance to me that I have to match the aspect manually when resizing to eg. 2x size of the movie. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 22 17:14:40 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 22 Jul 2001 17:14:40 +0200 Subject: [Mplayer-users] Keep aspect ratio In-Reply-To: <3B5AED1C.1000007@nerd.dk> References: <3B5AED1C.1000007@nerd.dk> Message-ID: <11109374512.20010722171440@gmx.de> Hello Mark, Sunday, July 22, 2001, 5:11:24 PM, you wrote: > Is there a keep aspect ratio feature in mplayer? It's of great annoiance > to me that I have to match the aspect manually when resizing to eg. 2x > size of the movie. you can do it on commandline with the -xy switch, but I guess you want to resize runtime? -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Sun Jul 22 19:00:11 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Sun, 22 Jul 2001 19:00:11 +0200 (MET DST) Subject: [Mplayer-users] DVD menus Message-ID: Hi, The player Ogle that was mentioned here on the list and in c't is as far as I know the only Linux player that decoded DVD-menus, which is a cool feature. Maybe someone of the cracks wants to take a look into the sources to implement this, too? It's at http://www.dtek.chalmers.se/groups/dvd/ gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Sun Jul 22 19:17:31 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Sun, 22 Jul 2001 19:17:31 +0200 Subject: [Mplayer-users] DVD menus In-Reply-To: References: Message-ID: <20010722191731.A12478@telia.com> Christoph Lampert wrote: > Maybe someone of the cracks wants to take a look into the sources > to implement this, too? It's at http://www.dtek.chalmers.se/groups/dvd/ Even better: since you seam to study at the same scool as the Ogle guys, how about if you go over there with a basball bat and convince them to write the code for us?:-) -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 22 19:20:39 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 22 Jul 2001 19:20:39 +0200 (CEST) Subject: [Mplayer-users] DVD menus In-Reply-To: Message-ID: <200107221720.TAA33964@thot.banki.hu> Hi, > The player Ogle that was mentioned here on the list and in c't is as far > as I know the only Linux player that decoded DVD-menus, which is a cool > feature. Maybe someone of the cracks wants to take a look into the sources > to implement this, too? It's at http://www.dtek.chalmers.se/groups/dvd/ > just looked at it, and it seems to be interesting. and it's plain C code :) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Sun Jul 22 19:21:31 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Sun, 22 Jul 2001 19:21:31 +0200 (MET DST) Subject: [Mplayer-users] DVD menus In-Reply-To: <20010722191731.A12478@telia.com> Message-ID: Hi Andre! On Sun, 22 Jul 2001, Andr? Dahlqvist wrote: > Christoph Lampert wrote: > > > Maybe someone of the cracks wants to take a look into the sources > > to implement this, too? It's at http://www.dtek.chalmers.se/groups/dvd/ > > Even better: since you seam to study at the same scool as the Ogle guys, > how about if you go over there with a basball bat and convince them to > write the code for us?:-) Javisst! But you should know best that it's vacation time now, and you won't find a single student at Chalmers even if you searched with a baseball bat. I'll have to wait till september... Maybe one of the mplayer coders is faster than that. gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Sun Jul 22 19:34:05 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Sun, 22 Jul 2001 19:34:05 +0200 Subject: [Mplayer-users] DVD menus In-Reply-To: <200107221720.TAA33964@thot.banki.hu> References: <200107221720.TAA33964@thot.banki.hu> Message-ID: <20010722193405.A12674@telia.com> > just looked at it, and it seems to be interesting. > and it's plain C code :) If you guys need some help from the #ogle coders they can be found in #ogle on the openprojects IRC-network. -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Sun Jul 22 19:53:35 2001 From: kinali at gmx.net (Attila Kinali) Date: Sun, 22 Jul 2001 19:53:35 +0200 Subject: [Mplayer-users] broken movie? In-Reply-To: <124108405388.20010722165831@gmx.de> References: <200107180853.KAA42184@thot.banki.hu> <20010718231152.52605489.rpbrown@xtra.co.nz> <124108405388.20010722165831@gmx.de> Message-ID: On Sun, 22 Jul 2001 16:58:31 +0200 Felix Buenemann wrote: > Btw. I've seen a DVD were one of the main movies VOBS had an incorrect > samplingrate (in fact it was same sampling rate as others), guess it > was a sort of copyprotection, as in sectorbased reading this wouldn't > cause any problems. Actualy i meant the bug where choiseing the wrong audio codec caused a slowdown. Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 22 19:59:49 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 22 Jul 2001 19:59:49 +0200 (CEST) Subject: [Mplayer-users] broken movie? In-Reply-To: Message-ID: <200107221759.TAA10278@thot.banki.hu> Hi, > On Sun, 22 Jul 2001 16:58:31 +0200 Felix Buenemann wrote: > > > Btw. I've seen a DVD were one of the main movies VOBS had an incorrect > > samplingrate (in fact it was same sampling rate as others), guess it > > was a sort of copyprotection, as in sectorbased reading this wouldn't > > cause any problems. > > Actualy i meant the bug where choiseing the wrong audio codec > caused a slowdown. it is NOT a bug. it's a missing feature, namely missing ifo parser. it selects audio stream of the first audio packet in the file. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Sun Jul 22 21:25:06 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Sun, 22 Jul 2001 21:25:06 +0200 (MET DST) Subject: [Mplayer-users] New features... Message-ID: Hi, I asked this before, but maybe times have changed... I'd like to have a +1 frame key, e.g. 's' in PAUSEd mode I'd like to have an OSD setting "timer without seekbar" I'd like to have different mode for OSD-timer: hh:mm:ss, hh:mm:ss:(framenr mod framerate), absolute framenr I'd also like the status line V: 9.9 A-V: 0.695 ct: 0.682 299 97% 0% 34.5% 291 (at least A-V and percentages) be visible as OSD... Maybe for jumping to beginning of file? I don't think the key is used yet. Oh yes, and a --shutup option that makes mplayer _not_ use stdout for anything. That way is will one day be possible to use stdout as output-device, like pgmpipe in mpeg2decode. Oh, this is almost like christmas ;-) When skipping single frames, sound is not important, it can be switched off, or desynchronize or whatever, I don't care. Is there an option to give a different path/filename for codecs.conf? I could not find any... Oh, and I still don't know why mplayer exists, when I press I think, ESC and q is enough for that... gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lgb at lgb.hu Sun Jul 22 21:42:23 2001 From: lgb at lgb.hu (=?iso-8859-2?B?R+Fib3IgTOlu4XJ0?=) Date: Sun, 22 Jul 2001 21:42:23 +0200 Subject: [Mplayer-users] New features... In-Reply-To: Message-ID: <20010722214223.A8267@vega.digitel2002.hu> On Sun, Jul 22, 2001 at 09:25:06PM +0200, Christoph Lampert wrote: > Oh yes, and a --shutup option that makes mplayer _not_ use > stdout for anything. That way is will one day be possible > to use stdout as output-device, like pgmpipe in mpeg2decode. Hmmm, this sounds good. IMHO the best solution would be changing printf's to mprintf or whatever ... That function would check a variable if output can be used or not. And we would have got an option to write messages into a specified file WHILE using stdout for output device or something similar. Also that function should be WELL designed with eg categories to be able to use with GUI as well without major modification of source for future GUI. -- --[ G?bor L?n?rt ]---[ Vivendi Telecom Hungary ]---------[ lgb at lgb.hu ]-- U have 8 bit comp or chip of them and it's unused or to be sold? Call me! -------[ +36 30 2270823 ]------> LGB <-----[ Linux/UNIX/8bit 4ever ]----- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From falk at lunat23.de Sun Jul 22 21:38:24 2001 From: falk at lunat23.de (Falk Schubert) Date: Sun, 22 Jul 2001 21:38:24 +0200 Subject: [Mplayer-users] libac3 and sse In-Reply-To: <170108236876.20010722165543@gmx.de> References: <20010713211507.7735e9b9.falk@lunat23.de> <0107132137080D.04350@astral> <20010721014838.3070b144.falk@lunat23.de> <170108236876.20010722165543@gmx.de> Message-ID: <20010722213824.4bd97a0b.falk@lunat23.de> > have you tried compiling mplayer with ./configure --disable-sse ? And > please tell what signal you get when mplayer crashes (ie. 11 SEGFAULT, > 4 SIGILL). It's a 4 SIGILL...I included a gdb output....hopefully you find any hint... root at helium:~> gdb mplayer mplayer.core GNU gdb 4.18 Copyright 1998 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-unknown-freebsd"...(no debugging symbols found)... Core was generated by `mplayer'. Program terminated with signal 4, Illegal instruction. Reading symbols from /usr/lib/libm.so.2...(no debugging symbols found)...done. Reading symbols from /usr/lib/libncurses.so.5...(no debugging symbols found)...done. Reading symbols from /usr/lib/libstdc++.so.3...(no debugging symbols found)...done. Reading symbols from /usr/local/lib/libSDL-1.1.so.3...(no debugging symbols found)...done. Reading symbols from /usr/local/lib/libesd.so.2...(no debugging symbols found)...done. Reading symbols from /usr/local/lib/libaudiofile.so.0...(no debugging symbols found)...done. Reading symbols from /usr/X11R6/lib/libX11.so.6...(no debugging symbols found)...done. Reading symbols from /usr/X11R6/lib/libXext.so.6...(no debugging symbols found)...done. Reading symbols from /usr/local/lib/libvga.so.1...(no debugging symbols found)...done. Reading symbols from /usr/local/lib/libaa.so.1...(no debugging symbols found)...done. Reading symbols from /usr/local/lib/libvgagl.so.1...(no debugging symbols found)...done. Reading symbols from /usr/local/lib/libpng.so.4...(no debugging symbols found)...done. Reading symbols from /usr/lib/libz.so.2...(no debugging symbols found)...done. Reading symbols from /usr/lib/libc_r.so.4...(no debugging symbols found)...done. Reading symbols from /usr/libexec/ld-elf.so.1...(no debugging symbols found)...done. #0 0x807f561 in downmix_3f_2r_to_2ch () (gdb) where #0 0x807f561 in downmix_3f_2r_to_2ch () #1 0x807a572 in imdct () Cannot access memory at address 0x5. Furthermore I compiled it without sse support and voila, I get pretty nice sound, but the movie is more a slide show....changing vo from x11 to dga in config did not change anything;( Is there any way to increase speed without using sse support? I can not imagine that sse plays the major part in means of speed... thanks falk -- enjoy your day! Falk Schubert Joellenbeckerstr. 287 33613 Bielefeld _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 22 22:28:55 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 22 Jul 2001 22:28:55 +0200 Subject: [Mplayer-users] libac3 and sse In-Reply-To: <20010722213824.4bd97a0b.falk@lunat23.de> References: <20010713211507.7735e9b9.falk@lunat23.de> <0107132137080D.04350@astral> <20010721014838.3070b144.falk@lunat23.de> <170108236876.20010722165543@gmx.de> <20010722213824.4bd97a0b.falk@lunat23.de> Message-ID: <128128228763.20010722222855@gmx.de> Hello Falk, Sunday, July 22, 2001, 9:38:24 PM, you wrote: >> have you tried compiling mplayer with ./configure --disable-sse ? And >> please tell what signal you get when mplayer crashes (ie. 11 SEGFAULT, >> 4 SIGILL). then there are two options: 1. your cpu doesn't support sse 2. your kernel doesn't properly support sse I think it's 2. there exists same prob with some 2.2.x linux kernels which don't properly support sse. > It's a 4 SIGILL...I included a gdb output....hopefully you find any > hint... eeh it's of no use, compile mplayer with ./configure --enable-debug and use mplayer binary inside mplayer sourcetree (I think mplayer is stripped on install) root at helium:~>> gdb mplayer mplayer.core > GNU gdb 4.18 your debugger is outdated for debugging sse code, grab yourself a copy of GDB 5.1 (as it's not released yet, use a cvs copy/snapshot -> ftp://sourceware.cygnus.com/pub/gdb/snapshots/ ). > Furthermore I compiled it without sse support and voila, I get pretty nice > sound, but the movie is more a slide show....changing vo from x11 to dga > in config did not change anything;( add -bpp 16 to commandline, it reduces memory bandwidth needed and gives quite a speedup. > Is there any way to increase speed without using sse support? I can not > imagine that sse plays the major part in means of speed... it's quite a difference believe me, SSE code operates on 4 floats at a time instead of 1 with FPU code, if you substract speed loss for modifying data to work with sse, which is sometimes needed you're at least with double speed of fpu code. Of course not all mplayer code is assembler optimized and not all code operates with floats so don't expect sse version of mplayer to be twice the speed of non-sse (and there's still mmx optimizations for integer stuff). > thanks falk -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 22 22:31:37 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 22 Jul 2001 22:31:37 +0200 Subject: [Mplayer-users] New features... In-Reply-To: <20010722214223.A8267@vega.digitel2002.hu> References: <20010722214223.A8267@vega.digitel2002.hu> Message-ID: <41128391407.20010722223137@gmx.de> Hello G?bor, Sunday, July 22, 2001, 9:42:23 PM, you wrote: > On Sun, Jul 22, 2001 at 09:25:06PM +0200, Christoph Lampert wrote: >> Oh yes, and a --shutup option that makes mplayer _not_ use >> stdout for anything. That way is will one day be possible >> to use stdout as output-device, like pgmpipe in mpeg2decode. > Hmmm, this sounds good. IMHO the best solution would be changing printf's > to mprintf or whatever ... That function would check a variable if output > can be used or not. And we would have got an option to write messages into > a specified file WHILE using stdout for output device or something similar. > Also that function should be WELL designed with eg categories to be able > to use with GUI as well without major modification of source for future > GUI. btw. I also thought bout something like verbose classes, let's have class 1 which is for main mplayer code, 2 for demuxer, 4 for ao, I thinkl you get the idea, so if you want to debug only demuxer and ao you'd use -v 6. It would make verbose output more usefull for specific tasks. -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From szabi at inf.elte.hu Sun Jul 22 22:40:16 2001 From: szabi at inf.elte.hu (BERECZ Szabolcs) Date: Sun, 22 Jul 2001 22:40:16 +0200 (CEST) Subject: [Mplayer-users] fbdev and scaling In-Reply-To: <3B59B348.2020206@kabelin.de> Message-ID: Hi! On Sat, 21 Jul 2001, Sven Kabelin wrote: > My video output is an ATI TV-Out composite.I use the frame buffer > device to put pictures on tv, resolution is 640x480. > Can I scale minor movies to full screen or it?s impossible to scale the > movie over the fbdev. use -vo xv if you can. scaling would be *really* slow with fbdev. Bye, Szabi _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Sun Jul 22 22:47:43 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Sun, 22 Jul 2001 22:47:43 +0200 (MET DST) Subject: [Mplayer-users] New features... In-Reply-To: <41128391407.20010722223137@gmx.de> Message-ID: On Sun, 22 Jul 2001, Felix Buenemann wrote: > Hello G?bor, > > Sunday, July 22, 2001, 9:42:23 PM, you wrote: > > > On Sun, Jul 22, 2001 at 09:25:06PM +0200, Christoph Lampert wrote: > >> Oh yes, and a --shutup option that makes mplayer _not_ use > >> stdout for anything. That way is will one day be possible > >> to use stdout as output-device, like pgmpipe in mpeg2decode. > > > Hmmm, this sounds good. IMHO the best solution would be changing printf's > > to mprintf or whatever ... That function would check a variable if output > > can be used or not. And we would have got an option to write messages into > > a specified file WHILE using stdout for output device or something similar. > > Also that function should be WELL designed with eg categories to be able > > to use with GUI as well without major modification of source for future > > GUI. > > > btw. I also thought bout something like verbose classes, let's have > class 1 which is for main mplayer code, 2 for demuxer, 4 for ao, I > thinkl you get the idea, so if you want to debug only demuxer and ao > you'd use -v 6. It would make verbose output more usefull for specific > tasks. Okay, but 1) not -v 6, because -v is verbose and _never_ has an argument. Take e.g. -debug 6 or -debuglevel 6 and second, don't take 6, but a binary sceme like: 0x00000001 is main function 0x00000002 is status reports (A-V etc) 0x00000004 is demux-code 0x00000008 is sync-code 0x00000010 is somethingelse 0x00000020 is somethingscompletelydiffernt you get the general idea. That way, default may be level 0x03, -debuglevel 0 switches of everything and 0xB make it possible to view only demux messages (and std. output), etc. perhaps also add a debug level, e.g. 0x00040000 is demux-debug-message (normally off) etc. This is a bit of work to get it straight, but it might be a big help. As a start one might give away different bits to different source-files. And there could be a global flag that makes mplayer print not only the level, but also the flag under which is was called. And who need new features anyway... writing different printfs is at least as much fun, too. ;-) gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From rococorikiki at hotmail.com Sun Jul 22 23:04:00 2001 From: rococorikiki at hotmail.com (rococo rikiki) Date: Sun, 22 Jul 2001 16:04:00 -0500 Subject: [Mplayer-users] Linux Playback Issues Involving all Data Types Message-ID: Problem : When I run mplayer with any file, (avi,mpg,etc) the player only outputs the left half side of the movie. Please help. Requested information : Linux smccomas 2.4.2-2 #1 Sun Apr 8 20:41:30 EDT 2001 i686 unknown Redhat Linux 7.1 (SeaWolf) Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/2.96/specs gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-81) XFree86-4.0.3-5 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M4 AGP (prog-if 00 [VGA]) Subsystem: Dell Computer Corporation: Unknown device 00a4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- [disabled] [size=128K] Capabilities: [50] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x2 Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- [root at smccomas rd]# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 6 cpu MHz : 698.477 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1392.64 ------------ I appreciate the help. Thanks -rikiki _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 22 23:54:36 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 22 Jul 2001 23:54:36 +0200 (CEST) Subject: [Mplayer-users] New features... In-Reply-To: Message-ID: <200107222154.XAA55188@thot.banki.hu> Hi, > I asked this before, but maybe times have changed... > > I'd like to have a +1 frame key, e.g. 's' in PAUSEd mode > I'd like to have an OSD setting "timer without seekbar" > I'd like to have different mode for OSD-timer: > hh:mm:ss, hh:mm:ss:(framenr mod framerate), absolute framenr > > I'd also like the status line > V: 9.9 A-V: 0.695 ct: 0.682 299 97% 0% 34.5% 291 > (at least A-V and percentages) be visible as OSD... I won't touch OSD code before libvo2 is finished, because it will be totally rewritten. > Maybe for jumping to beginning of file? I don't think > the key is used yet. yes, it's possible. > Oh yes, and a --shutup option that makes mplayer _not_ use > stdout for anything. That way is will one day be possible > to use stdout as output-device, like pgmpipe in mpeg2decode. Not too simple... code is full of printf and fprintf lines... i don't want to change all of them... and redirecting stdout>/dev/null doesn't allow you to use for example pgmout. > Oh, this is almost like christmas ;-) > > When skipping single frames, sound is not important, it can > be switched off, or desynchronize or whatever, I don't care. I already implemented it about a month ago, but i couldn't solve audio desyncronization, so i didn't commited. (it allowed using right arror to step one frame in pause mode) > Is there an option to give a different path/filename for codecs.conf? > I could not find any... Vladimir's --datadir= ? > Oh, and I still don't know why mplayer exists, when I press > I think, ESC and q is enough for that... Because I like it. Just press enter in mc on a file, it start playing. press enter again if you want to exit and try next file. when i check 200+ files (testing stage) it's very usefull. if you don't like it, just comment it out in mplayer.c maybe a key layout configuration file will be added later. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 22 23:56:06 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 22 Jul 2001 23:56:06 +0200 (CEST) Subject: [Mplayer-users] New features... In-Reply-To: <20010722214223.A8267@vega.digitel2002.hu> Message-ID: <200107222156.XAA55292@thot.banki.hu> Hi, > On Sun, Jul 22, 2001 at 09:25:06PM +0200, Christoph Lampert wrote: > > Oh yes, and a --shutup option that makes mplayer _not_ use > > stdout for anything. That way is will one day be possible > > to use stdout as output-device, like pgmpipe in mpeg2decode. > > Hmmm, this sounds good. IMHO the best solution would be changing printf's > to mprintf or whatever ... That function would check a variable if output > can be used or not. And we would have got an option to write messages into > a specified file WHILE using stdout for output device or something similar. > Also that function should be WELL designed with eg categories to be able > to use with GUI as well without major modification of source for future > GUI. and it should handle the verbose level too. something like kprintf... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Mon Jul 23 00:04:04 2001 From: kinali at gmx.net (Attila Kinali) Date: Mon, 23 Jul 2001 00:04:04 +0200 Subject: [Mplayer-users] broken movie? In-Reply-To: <200107221759.TAA10278@thot.banki.hu> References: <200107221759.TAA10278@thot.banki.hu> Message-ID: On Sun, 22 Jul 2001 19:59:49 +0200 (CEST) Arpi wrote: > > Actualy i meant the bug where choiseing the wrong audio codec > > caused a slowdown. > > it is NOT a bug. it's a missing feature, namely missing ifo parser. > it selects audio stream of the first audio packet in the file. I thought that all dvds have ac3 sound ? Or did you get any with something else ? Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 23 00:07:27 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 23 Jul 2001 00:07:27 +0200 (CEST) Subject: [Mplayer-users] New features... In-Reply-To: <41128391407.20010722223137@gmx.de> Message-ID: <200107222207.AAA35346@thot.banki.hu> Hi, > btw. I also thought bout something like verbose classes, let's have > class 1 which is for main mplayer code, 2 for demuxer, 4 for ao, I > thinkl you get the idea, so if you want to debug only demuxer and ao > you'd use -v 6. It would make verbose output more usefull for specific > tasks. i also thought this :) but. it's called flags, not classes :) but, it is not enough. current verbose leevls are verbose levels. if you use -v, only get some detailed info. with -2, you get basic info from demuxer, like state of buffers. with -4, you get very detailed info from demuxer, including hex dump of headers, etc. if we're using flags, we should also include levels too. for example, in the code we can combine these: mprintf(MPLOG_DEMUXER,4,"header: %x %x %x %x\n",p[0],p[1],p[2],p[3]) use could use class names instead of numbers: mplayer -d demux=3 -d cache=2 -d decaudio=0 file.avi A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 23 00:11:27 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 23 Jul 2001 00:11:27 +0200 (CEST) Subject: [Mplayer-users] Linux Playback Issues Involving all Data Types In-Reply-To: Message-ID: <200107222211.AAA35332@thot.banki.hu> Hi, > Requested information : where is mplayer -v output? > gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-81) ehh. did you read DOCS/Requirements ? or do you still using 0.17a? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 23 00:15:14 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 23 Jul 2001 00:15:14 +0200 (CEST) Subject: [Mplayer-users] broken movie? In-Reply-To: Message-ID: <200107222215.AAA35496@thot.banki.hu> Hi, > > > > Actualy i meant the bug where choiseing the wrong audio codec > > > caused a slowdown. > > > > it is NOT a bug. it's a missing feature, namely missing ifo parser. > > it selects audio stream of the first audio packet in the file. > > I thought that all dvds have ac3 sound ? > Or did you get any with something else ? > i have VOB files with PCM and mpeg audio too. they all are allowed. and there are also DTS audio steram too, at least Atmosfear has one. please upload teh first 5MB of this file... i'll check. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 23 00:51:19 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 23 Jul 2001 00:51:19 +0200 (CEST) Subject: [Mplayer-users] Coyote.Ugly.Sample-highbitrate-atmos.avi Message-ID: <200107222251.AAA38402@thot.banki.hu> Hi, I've found why is that AVI so slow with ffmpeg. It has thin black bands over & under the image, filling about teh half of the image. I think that ffmpeg doesn't recognize it and spends a lots of CPU time decoding it... Gerard told me that there could be done optimization of iDCT with full zeros. I think it can solve this problem. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Mon Jul 23 04:12:59 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Mon, 23 Jul 2001 04:12:59 +0200 Subject: [Mplayer-users] Coyote.Ugly.Sample-highbitrate-atmos.avi References: <200107222251.AAA38402@thot.banki.hu> Message-ID: <001901c1131d$051758c0$cd3fa8c0@astral> Hi, ----- Original Message ----- From: "Arpi" To: Sent: Monday, July 23, 2001 12:51 AM Subject: [Mplayer-users] Coyote.Ugly.Sample-highbitrate-atmos.avi > Hi, > > I've found why is that AVI so slow with ffmpeg. > It has thin black bands over & under the image, filling about > teh half of the image. I think that ffmpeg doesn't recognize > it and spends a lots of CPU time decoding it... > yes, I know, but I think win32 divx codec also does it, > Gerard told me that there could be done optimization of iDCT > with full zeros. I think it can solve this problem. > great, btw what about the video I upped to MPlayer/incoming/divx4beta/? have you asked gerard to fox it (imho height not multiple of 16 prob). > > A'rpi / Astral & ESP-team _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Mon Jul 23 05:29:18 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Mon, 23 Jul 2001 05:29:18 +0200 Subject: [Mplayer-users] New features... References: Message-ID: <003901c11327$b07dc7d0$cd3fa8c0@astral> ----- Original Message ----- From: "Christoph Lampert" To: "G?bor L?n?rt" Sent: Sunday, July 22, 2001 10:47 PM Subject: Re: Re[2]: [Mplayer-users] New features... On Sun, 22 Jul 2001, Felix Buenemann wrote: > Hello G?bor, > > Sunday, July 22, 2001, 9:42:23 PM, you wrote: > > > On Sun, Jul 22, 2001 at 09:25:06PM +0200, Christoph Lampert wrote: > >> Oh yes, and a --shutup option that makes mplayer _not_ use > >> stdout for anything. That way is will one day be possible > >> to use stdout as output-device, like pgmpipe in mpeg2decode. > > > Hmmm, this sounds good. IMHO the best solution would be changing printf's > > to mprintf or whatever ... That function would check a variable if output > > can be used or not. And we would have got an option to write messages into > > a specified file WHILE using stdout for output device or something similar. > > Also that function should be WELL designed with eg categories to be able > > to use with GUI as well without major modification of source for future > > GUI. > > > btw. I also thought bout something like verbose classes, let's have > class 1 which is for main mplayer code, 2 for demuxer, 4 for ao, I > thinkl you get the idea, so if you want to debug only demuxer and ao > you'd use -v 6. It would make verbose output more usefull for specific > tasks. Okay, but 1) not -v 6, because -v is verbose and _never_ has an argument. Take e.g. -debug 6 or -debuglevel 6 and second, don't take 6, but a binary sceme like: it already is, noticed that I use 1, 2, 4 =) 0x00000001 is main function 0x00000002 is status reports (A-V etc) 0x00000004 is demux-code 0x00000008 is sync-code 0x00000010 is somethingelse 0x00000020 is somethingscompletelydiffernt why use hexadecimal, you talked of binary =) actually 1 sets bit 0, 2 bit 2, 4 bit 3 and so on, so you get uniquely identifiable numbers. IMHO we both had same idea you only didn't spot it in my message. you get the general idea. That way, default may be level 0x03, I already got it before =) -debuglevel 0 switches of everything and 0xB make it possible to view only demux messages (and std. output), etc. but it's much easier to take decimal numbers on commandline, so one should pass -debuglevel 11 or if we go to put more work into that use keywords for the bits, although I'd prefer -debuglevel main,demux=4,vo which would give verbosity 0 main messages, verbosity 4 demuxer messages and verbosity 0 vo messages. (were 0 is default, not off) perhaps also add a debug level, e.g. 0x00040000 is demux-debug-message (normally off) yes btw. I'd use another variable for storing verbose levels using 2 bits, which should be enough (0..3), if not 3 bits should be enough but were getting slowly out of variable range as this would be 3 times number of bits used for flags, so we should maybe use 16bits for flags and 32bits for the levels (so 2bits/value) - imho 64bit ints are not very portable, am I right?. etc. This is a bit of work to get it straight, but it might be a big help. As a start one might give away different bits to different source-files. we don't have enough bits =) na, bits have to be given for tasks, like demuxer, decoder, vo, ao and so on. And there could be a global flag that makes mplayer print not only the level, but also the flag under which is was called. And who need new features anyway... writing different printfs is at least as much fun, too. ;-) gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Mon Jul 23 07:41:40 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Mon, 23 Jul 2001 08:41:40 +0300 (EEST) Subject: [Mplayer-users] cyrillic fonts In-Reply-To: <197123670278.20010720180728@gmx.de> Message-ID: On Fri, 20 Jul 2001, [ISO-8859-1] Felix B?nemann wrote: > > when i finally managed to put my hands on the elusive cyrillic fonts (thanks, > > arpi), it turned out that they're quite ugly. so i just made my own. they're > > not a whole font like bgfont.zip, they're just the cyrillic letters and a > > cyr.desc which takes the rest from arial-12. the resulting bundle is much > > smaller and even looks better :) > btw. theres a tool to create fonts in the TOOLS dir using freetype > lib (haven#t teste it myself). i tried it, and found it uncomfortable to use. it generates a complete font, while i just needed the cyrillic letters. also, it produces strangely uneven spaces between the characters - sometimes putting them so close together so there is no place for the shadow map. it leaves HUGE empty spaces where there are no defined glyphs in the font. it generates pngs, while i created the font directly in the gimp and saved it directly as raw. all in all, the tool might be useful for creating a whole new font, but not for creating a simple modification like i needed. i think it would be better to create a gimp script for dumping a font - i think it will not be impossible to make it do everything by itself, including the shadow bitmap and the font.desc. i'll try to put a perl-fu together, but it might take time since i'm doing it at work and that's not the only thing i'm doing :) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Mon Jul 23 07:47:39 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Mon, 23 Jul 2001 08:47:39 +0300 (EEST) Subject: [Mplayer-users] problematic files uploaded to FTP... In-Reply-To: <200107202058.WAA14648@thot.banki.hu> Message-ID: On Fri, 20 Jul 2001, Arpi wrote: > Willow.asf > to big for me to download now (i'll download it next monday, from work) > what's teh problem with it? and where? the problem is somewhere about 2/3 in the movie, something causes mplayer to report 'end of file' and terminate. skipping past it works and plays fine to the end. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Mon Jul 23 07:49:50 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Mon, 23 Jul 2001 08:49:50 +0300 (EEST) Subject: [Mplayer-users] Re: video output In-Reply-To: <200107210844.KAA34046@thot.banki.hu> Message-ID: On Sat, 21 Jul 2001, Arpi wrote: > > -vo sdl:dga doesn't work. I have MPlayer 0.17cvs-010620-18:14, do i need to > > newer version for it ? > > no, it should work. > did you read DOCS/VIDEOCARDS,mand DOCS/DGA ? > > if still not ok, then read DOCS/BUGREPORTS, and send a uality bugreport. could be sdl compiled without dga? _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Mon Jul 23 07:52:12 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Mon, 23 Jul 2001 08:52:12 +0300 (EEST) Subject: [Mplayer-users] Bugreport-voodoo3 rh7.1 and xvideo In-Reply-To: <20010721105631.12359.qmail@web3903.mail.yahoo.com> Message-ID: On Sat, 21 Jul 2001, Adam Bertil wrote: > Mplayer(pre5-cvs does not compile today 21jul) > complains about this: > > --- > -- > > When using mplayer -vo xv a.mpg i think you just need to run it as root for xv to work. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Mon Jul 23 07:54:32 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Mon, 23 Jul 2001 08:54:32 +0300 (EEST) Subject: [Mplayer-users] Translations In-Reply-To: <20010721173523.A1099@telia.com> Message-ID: On Sat, 21 Jul 2001, [iso-8859-1] Andr? Dahlqvist wrote: > I assume there is work going on to translate mplayer itself to other > languages? I mean, there isn't much point in just having the documentation > in other languages. i haven't seen any interface in mplayer, 'cept the OSD. what is there to translate? it's cool that way :) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Mon Jul 23 07:51:06 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Mon, 23 Jul 2001 08:51:06 +0300 (EEST) Subject: [Mplayer-users] subtitles In-Reply-To: <01072100165907.00511@astral> Message-ID: On Sat, 21 Jul 2001, Felix Buenemann wrote: > > i'm having a strange problem with subtitles. i'm running 0.18pre5. > > all subtitles are displayed without the last line - so with one-line > > subtitle i see nothing, with two-line i see only the first line, etc. > > is this bug known, or fixed, or some problem on my side? > > the subtitles are in format {startframe}{endframe}line 1|line 2|line 3. > > > very strange, maybe up a short piece of the clip along with the subtitle file > to mplayer's ftp site. i did, cthd.avi and bg.sub in incoming (the subs are in cyrillic (bulgarian)) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Mon Jul 23 08:12:12 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Mon, 23 Jul 2001 09:12:12 +0300 (EEST) Subject: [Mplayer-users] New features... In-Reply-To: <200107222154.XAA55188@thot.banki.hu> Message-ID: > > I asked this before, but maybe times have changed... since everybody is asking for features, here i am: why aren't the subtitle fonts installed system-wide? it's good to be able to override them with a ~/.mplayer/font directory, but having ONLY that doesn't seem right. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Sun Jul 29 06:28:41 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Sun, 29 Jul 2001 06:28:41 +0200 Subject: [Mplayer-users] Bugreport-voodoo3 rh7.1 and xvideo In-Reply-To: References: Message-ID: <200107290428.f6T4SgQ01094@alison.hemmet.chalmers.se> Am Montag, 23. Juli 2001 07:52 schrieben Sie: > On Sat, 21 Jul 2001, Adam Bertil wrote: > > Mplayer(pre5-cvs does not compile today 21jul) > > complains about this: > > > > --- > > -- > > > > When using mplayer -vo xv a.mpg > > i think you just need to run it as root for xv to work. No, you don't! Root priviledges are only needed for DGA gruel -- Christoph Lampert, gruel at gmx.de "Linux is a cancer that attaches itself in an intellectual property sense to everything it touches. That's the way that the license works." - Steve Balmer "Epsilon < 0" - chl _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From artur.zaprzala at talex.com.pl Mon Jul 23 09:01:57 2001 From: artur.zaprzala at talex.com.pl (Artur Zaprzala) Date: Mon, 23 Jul 2001 09:01:57 +0200 Subject: [Mplayer-users] cyrillic fonts References: <200107201843.UAA29160@thot.banki.hu> Message-ID: <3B5BCBE5.E03879DD@talex.com.pl> > > but there is a better fontgen tool, at the ftp, it supports codepages, and > also generates alphamap too: > ftp://mplayer.dev.hu/MPlayer/contrib/fonts/subfont-1.0a.tar.bz2 There is a little newer version at: ftp://thot.banki.hu/MPlayer/incoming/OLD/subfont-1.0a1.tar.bz2 Expect much improved release soon :) Artur Zaprzala _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Mon Jul 23 09:15:40 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Mon, 23 Jul 2001 09:15:40 +0200 Subject: [Mplayer-users] ffdivx benchmarks Message-ID: <20010723091540.A71020@hoth.amu.edu.pl> FreeBSD 4.3 AMD K6-2 333MHz + C&T CT65554 + Xv gcc version 2.95.3 [FreeBSD] 20010315 (release) XFree86 Version 4.1.0 / X Window System (800x600x24bpp) MMX + 3DNow -nosound -benchmark -osdlevel 2 [-vc divx|divxds|ffdivx] ffdivx history: 2001-07-06: first ffdivx 0.4.3 2001-07-10: fastmem (Nick) 2001-07-11: dsputil_mmx (Nick) 2001-07-12: dsputil 32bit (Jurgen) 2001-07-16: dsputil_mmx (Nick) 2001-07-18: dsputil 3DNow+mmx2 (Nick) 2001-07-20: mpegvideo mmx (Nick) 2001-07-21: mpegvideo insns+C (Nick) Best Results: Space Cowboys trailer (145s): [DIV3] 480x200 24bpp 24.00 fps 154.3 kbps divx---010723: V: 26.601s VO: 8.711s A: 0.000s Sys: 17.093s = 52.406s divxds-010720: V: 27.631s VO: 10.465s A: 0.000s Sys: 20.189s = 58.285s divx4--010723: NA ffdivx-010706: V: 49.861s VO: 9.257s A: 0.000s Sys: 17.305s = 76.423s ffdivx-010710: V: 49.591s VO: 9.048s A: 0.000s Sys: 17.170s = 75.809s ffdivx-010711: V: 47.585s VO: 8.976s A: 0.000s Sys: 17.060s = 73.622s ffdivx-010712: V: 35.031s VO: 9.155s A: 0.000s Sys: 17.309s = 61.495s ffdivx-010716: V: 33.062s VO: 9.100s A: 0.000s Sys: 17.719s = 59.882s ffdivx-010718: V: 28.258s VO: 9.001s A: 0.000s Sys: 17.570s = 54.829s ffdivx-010720: V: 27.184s VO: 8.917s A: 0.000s Sys: 17.389s = 53.491s ffdivx-010721: V: 27.304s VO: 9.011s A: 0.000s Sys: 17.221s = 53.536s MI2 trailer (121s): [DIV3] 480x204 24bpp 24.00 fps 700.6 kbps divx---010720: V: 42.600s VO: 9.061s A: 0.000s Sys: 17.498s = 69.159s divxds-010720: V: 43.662s VO: 9.126s A: 0.000s Sys: 17.804s = 70.592s divx4--010723: NA ffdivx-010706: V: 63.671s VO: 9.333s A: 0.000s Sys: 18.321s = 91.325s ffdivx-010711: V: 59.441s VO: 9.137s A: 0.000s Sys: 18.229s = 86.808s ffdivx-010712: V: 52.497s VO: 9.582s A: 0.000s Sys: 18.179s = 80.258s ffdivx-010716: V: 51.008s VO: 9.193s A: 0.000s Sys: 18.575s = 78.776s ffdivx-010718: V: 44.379s VO: 9.120s A: 0.000s Sys: 18.210s = 71.709s ffdivx-010720: V: 43.802s VO: 9.166s A: 0.000s Sys: 18.314s = 71.283s ffdivx-010721: V: 43.284s VO: 9.157s A: 0.000s Sys: 18.205s = 70.646s Tomb Raider trailer (136s): [DIV3] 480x260 24bpp 24.00 fps 761.0 kbps divx---010720: V: 52.189s VO: 11.377s A: 0.000s Sys: 21.377s = 84.943s divxds-010720: V: 53.754s VO: 11.364s A: 0.000s Sys: 21.381s = 86.499s divx4--010723: NA ffdivx-010706: V: 75.025s VO: 11.877s A: 0.000s Sys: 22.034s = 108.936s ffdivx-010711: V: 69.263s VO: 11.751s A: 0.000s Sys: 21.967s = 102.980s ffdivx-010712: V: 60.255s VO: 11.892s A: 0.000s Sys: 21.754s = 93.901s ffdivx-010716: V: 58.367s VO: 11.770s A: 0.000s Sys: 22.604s = 92.742s ffdivx-010718: V: 52.474s VO: 11.585s A: 0.000s Sys: 22.201s = 86.261s ffdivx-010720: V: 51.125s VO: 11.678s A: 0.000s Sys: 21.904s = 84.707s ffdivx-010721: V: 50.546s VO: 11.740s A: 0.000s Sys: 21.793s = 84.079s Wing Commander trailer (68s): [DIV3] 640x360 24bpp 24.00 fps 846.9 kbps divx---010720: V: 43.329s VO: 10.451s A: 0.000s Sys: 19.470s = 73.250s divxds-010720: V: 44.259s VO: 10.484s A: 0.000s Sys: 19.487s = 74.229s divx4--010723: NA ffdivx-010706: V: 62.605s VO: 8.188s A: 0.000s Sys: 19.616s = 90.410s ffdivx-010711: V: 58.277s VO: 8.039s A: 0.000s Sys: 19.694s = 86.010s ffdivx-010712: V: 49.239s VO: 8.279s A: 0.000s Sys: 19.710s = 77.228s ffdivx-010716: V: 47.548s VO: 8.227s A: 0.000s Sys: 20.257s = 76.033s ffdivx-010718: V: 42.993s VO: 8.087s A: 0.000s Sys: 19.924s = 71.004s ffdivx-010720: V: 41.133s VO: 8.229s A: 0.000s Sys: 19.827s = 69.189s ffdivx-010721: V: 40.928s VO: 8.217s A: 0.000s Sys: 19.745s = 68.889s Dune trailer (60s): [DIV3] 624x356 24bpp 24.00 fps 1154.6 kbps divx---010720: V: 38.014s VO: 10.254s A: 0.000s Sys: 18.678s = 66.946s divxds-010720: V: 38.915s VO: 10.140s A: 0.000s Sys: 18.924s = 67.978s divx4--010723: NA ffdivx-010706: V: 62.498s VO: 10.769s A: 0.000s Sys: 19.103s = 92.370s ffdivx-010711: V: 59.567s VO: 10.737s A: 0.000s Sys: 19.008s = 89.311s ffdivx-010712: V: 49.407s VO: 10.802s A: 0.000s Sys: 19.342s = 79.552s ffdivx-010716: V: 47.516s VO: 10.784s A: 0.000s Sys: 19.464s = 77.764s ffdivx-010718: V: 41.251s VO: 10.627s A: 0.000s Sys: 19.503s = 71.381s ffdivx-010720: V: 42.206s VO: 10.650s A: 0.000s Sys: 19.344s = 72.201s ffdivx-010721: V: 42.094s VO: 10.597s A: 0.000s Sys: 19.207s = 71.899s Gladiator trailer (85s): [DIV3] 480x272 24bpp 24.00 fps 986.1 kbps divx---010720: V: 38.197s VO: 9.118s A: 0.000s Sys: 16.341s = 63.656s divxds-010720: V: 39.719s VO: 9.148s A: 0.000s Sys: 16.095s = 64.961s divx4--010723: NA ffdivx-010706: V: 58.397s VO: 8.855s A: 0.000s Sys: 16.803s = 84.054s ffdivx-010711: V: 54.742s VO: 8.676s A: 0.000s Sys: 16.587s = 80.005s ffdivx-010712: V: 46.858s VO: 9.066s A: 0.000s Sys: 16.389s = 72.312s ffdivx-010716: V: 45.024s VO: 8.813s A: 0.000s Sys: 17.095s = 70.932s ffdivx-010718: V: 39.597s VO: 8.782s A: 0.000s Sys: 16.827s = 65.206s ffdivx-010720: V: 39.583s VO: 8.832s A: 0.000s Sys: 16.360s = 64.774s ffdivx-010721: V: 38.917s VO: 8.772s A: 0.000s Sys: 16.688s = 64.376s Ronin trailer (122s): [DIV3] 640x304 24bpp 25.00 fps 820.6 kbps divx---010720: V: 76.437s VO: 19.920s A: 0.000s Sys: 35.158s = 131.515s divxds-010720: V: 75.681s VO: 20.058s A: 0.000s Sys: 35.098s = 130.836s divx4--010723: NA ffdivx-010706: V: 116.941s VO: 14.743s A: 0.000s Sys: 36.564s = 168.248s ffdivx-010711: V: 108.452s VO: 14.651s A: 0.000s Sys: 36.061s = 159.164s ffdivx-010712: V: 93.509s VO: 14.644s A: 0.000s Sys: 36.192s = 144.344s ffdivx-010716: V: 90.271s VO: 14.666s A: 0.000s Sys: 36.401s = 141.337s ffdivx-010718: V: 77.054s VO: 14.625s A: 0.000s Sys: 36.337s = 128.016s ffdivx-010720: V: 77.930s VO: 14.564s A: 0.000s Sys: 35.980s = 128.473s ffdivx-010721: V: 77.311s VO: 14.713s A: 0.000s Sys: 35.946s = 127.971s Hannibal trailer (139s): [DIV3] 480x260 24bpp 24.00 fps 185.7 kbps divx---010720: V: 34.902s VO: 13.047s A: 0.000s Sys: 23.557s = 71.506s divxds-010720: V: 35.669s VO: 13.451s A: 0.000s Sys: 24.632s = 73.752s divx4--010723: NA ffdivx-010706: V: 70.192s VO: 13.309s A: 0.000s Sys: 24.315s = 107.816s ffdivx-010711: V: 66.790s VO: 13.295s A: 0.000s Sys: 24.121s = 104.205s ffdivx-010712: V: 47.430s VO: 13.350s A: 0.000s Sys: 23.983s = 84.763s ffdivx-010716: V: 44.439s VO: 13.434s A: 0.000s Sys: 24.167s = 82.041s ffdivx-010718: V: 41.497s VO: 13.329s A: 0.000s Sys: 24.083s = 78.909s ffdivx-010720: V: 38.311s VO: 13.387s A: 0.000s Sys: 23.845s = 75.543s ffdivx-010721: V: 38.055s VO: 13.345s A: 0.000s Sys: 23.882s = 75.283s Star Wars 1 trailer (147s): [DIV3] 640x288 24bpp 24.00 fps 995.3 kbps divx---010720: V: 82.784s VO: 21.985s A: 0.000s Sys: 38.765s = 143.534s divxds-010720: V: 82.977s VO: 22.021s A: 0.000s Sys: 38.686s = 143.684s divx4--010723: NA ffdivx-010712: V: 102.480s VO: 15.861s A: 0.000s Sys: 39.604s = 157.945s ffdivx-010716: V: 97.965s VO: 15.720s A: 0.000s Sys: 39.653s = 153.338s ffdivx-010718: V: 92.271s VO: 15.800s A: 0.000s Sys: 40.417s = 148.489s ffdivx-010720: V: 86.773s VO: 15.997s A: 0.000s Sys: 39.656s = 142.426s ffdivx-010721: V: 85.891s VO: 16.024s A: 0.000s Sys: 39.751s = 141.665s Highlander 4 trailer (97s): [DIV3] 520x310 24bpp 24.00 fps 892.7 kbps divx---010720: V: 54.347s VO: 11.776s A: 0.000s Sys: 21.669s = 87.792s divxds-010720: V: 54.506s VO: 12.052s A: 0.000s Sys: 21.917s = 88.474s divx4--010723: NA ffdivx-010720: V: 54.758s VO: 9.386s A: 0.000s Sys: 22.099s = 86.243s ffdivx-010721: V: 54.293s VO: 9.478s A: 0.000s Sys: 22.019s = 85.790s -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Mon Jul 23 09:34:35 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Mon, 23 Jul 2001 09:34:35 +0200 (MET DST) Subject: [Mplayer-users] dirty ideas to speedup libMP3 Message-ID: <200107230734.f6N7YZB06937@pheidippides.md.chalmers.se> Hi, I found that on slow CPUs (and I mean slooooooow like mine), MP3 Audio eats a lot of CPU time (up to 50%, it can't skip & often no MMX and/or 3dnow) I am looking for a way to speed this up. Would it be possible to 1) preprocess audio data (uncompressed) to get a lower bitrate? like half or so? 2) process audio bitstream only partially, e.g. drop the highest frequencies, s.th. quality gets lower, but decoding faster? gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 23 09:58:36 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 23 Jul 2001 09:58:36 +0200 (CEST) Subject: [Mplayer-users] Coyote.Ugly.Sample-highbitrate-atmos.avi In-Reply-To: <001901c1131d$051758c0$cd3fa8c0@astral> Message-ID: <200107230758.JAA11860@thot.banki.hu> Hi, > great, btw what about the video I upped to MPlayer/incoming/divx4beta/? have > you asked gerard to fox it (imho height not multiple of 16 prob). it's already fixed in new ffmpeg (0.4.5). but it wasn't yet merged with Nick's optimized code... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 23 10:10:40 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 23 Jul 2001 10:10:40 +0200 (CEST) Subject: [Mplayer-users] Bugreport-voodoo3 rh7.1 and xvideo In-Reply-To: <200107290428.f6T4SgQ01094@alison.hemmet.chalmers.se> Message-ID: <200107230810.KAA10436@thot.banki.hu> Hi, > Am Montag, 23. Juli 2001 07:52 schrieben Sie: > > On Sat, 21 Jul 2001, Adam Bertil wrote: > > > Mplayer(pre5-cvs does not compile today 21jul) > > > complains about this: > > > > > > --- > > > -- > > > > > > When using mplayer -vo xv a.mpg > > > > i think you just need to run it as root for xv to work. > > No, you don't! > Root priviledges are only needed for DGA and maybe for 3dfx's Xv too. It uses Glide, which is a root-only library. Are you running mplayer locally? I tried to run it on a second computer, and display redirected to mine, but i got the same errors for Xv. X11 did work. Btw you should upgrade X, AFAIK 3dfx stuff in 4.0.3 is still buggy. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 23 10:20:13 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 23 Jul 2001 10:20:13 +0200 (CEST) Subject: [Mplayer-users] cyrillic fonts In-Reply-To: <3B5BCBE5.E03879DD@talex.com.pl> Message-ID: <200107230820.KAA33940@thot.banki.hu> Hi, > > > > but there is a better fontgen tool, at the ftp, it supports codepages, and > > also generates alphamap too: > > ftp://mplayer.dev.hu/MPlayer/contrib/fonts/subfont-1.0a.tar.bz2 > > There is a little newer version at: > ftp://thot.banki.hu/MPlayer/incoming/OLD/subfont-1.0a1.tar.bz2 also check my improved subfont.c ("patch" for subfont-1.0a1.tar.bz2) ftp://thot.banki.hu/MPlayer/incoming/OLD/subfont.c It makes better alpha map, and works on glibc 2.1.x too. > Expect much improved release soon :) Waiting! I wanna include it in the next release. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Mon Jul 23 10:23:37 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Mon, 23 Jul 2001 10:23:37 +0200 (MET DST) Subject: [Mplayer-users] Radeon VE Message-ID: <200107230823.f6N8NbB08213@pheidippides.md.chalmers.se> Hi, anyone using ATI Radeon VE card? Is there any way of getting 1) XFree 2) XVideo (-vo xv) 3) DVI-port 4) TVout 5) multi screen to work with mplayer? Any experience with framebuffer and/or X-on-framebuffer? gruel P.S. Has anyone a Matrox G400 with DVI-out for sale? -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 23 10:39:17 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 23 Jul 2001 10:39:17 +0200 (CEST) Subject: [Mplayer-users] Radeon VE In-Reply-To: <200107230823.f6N8NbB08213@pheidippides.md.chalmers.se> Message-ID: <200107230839.KAA44524@thot.banki.hu> Hi, > P.S. Has anyone a Matrox G400 with DVI-out for sale? AFAIK G400 has no DVI out. it was introduced in G450. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From artur.zaprzala at talex.com.pl Mon Jul 23 11:20:15 2001 From: artur.zaprzala at talex.com.pl (Artur Zaprzala) Date: Mon, 23 Jul 2001 11:20:15 +0200 Subject: [Mplayer-users] cyrillic fonts References: <200107230820.KAA33940@thot.banki.hu> Message-ID: <3B5BEC4F.6AD6A6BA@talex.com.pl> Arpi wrote: > > > Expect much improved release soon :) > Waiting! I wanna include it in the next release. Could you throw into incoming fonts that were used to create arpi_osd*.raw and arpi_progress*.raw, so that subfont could render all glyphs for Mplayer. Artur Zaprzala _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Mon Jul 23 11:42:51 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Mon, 23 Jul 2001 11:42:51 +0200 (MET DST) Subject: [Mplayer-users] Radeon VE Message-ID: <200107230942.f6N9gqB10328@pheidippides.md.chalmers.se> >Hi, > >> P.S. Has anyone a Matrox G400 with DVI-out for sale? >AFAIK G400 has no DVI out. it was introduced in G450. Hi Arpi, _Working_ DVI with Linux? And G450 was less well supported my MPlayer/XFree, right? gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Mon Jul 23 11:40:41 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Mon, 23 Jul 2001 11:40:41 +0200 (CEST) Subject: [Mplayer-users] subtitles In-Reply-To: <01072100165907.00511@astral> Message-ID: > > the subtitles are in format {startframe}{endframe}line 1|line 2|line 3. > very strange, maybe up a short piece of the clip along with the subtitle file or just a subtitle file, one can play it against any video. -- Dariusz Pietrzak Excuse me, I'm cixelsyd today _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Mon Jul 23 11:51:21 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Mon, 23 Jul 2001 12:51:21 +0300 (EEST) Subject: [Mplayer-users] subtitles In-Reply-To: Message-ID: On Mon, 23 Jul 2001, Dariusz Pietrzak wrote: > > > the subtitles are in format {startframe}{endframe}line 1|line 2|line 3. > > very strange, maybe up a short piece of the clip along with the subtitle file > or just a subtitle file, one can play it against any video. nope. strange thing is, this happened with only that video. i tried it with another and it is fine. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From steve at daviesfam.org Mon Jul 23 11:51:22 2001 From: steve at daviesfam.org (Stephen Davies) Date: Mon, 23 Jul 2001 10:51:22 +0100 (BST) Subject: [Mplayer-users] Bugreport-voodoo3 rh7.1 and xvideo In-Reply-To: <200107230810.KAA10436@thot.banki.hu> Message-ID: On Mon, 23 Jul 2001, Arpi wrote: > > No, you don't! > > Root priviledges are only needed for DGA > and maybe for 3dfx's Xv too. > It uses Glide, which is a root-only library. Definitely don't require root for 3dfx XV. Agree that you need CVS or 4.1.0 tdfx driver. Steve Voodoo3/Xv/TV-out user _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Mon Jul 23 11:48:45 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Mon, 23 Jul 2001 11:48:45 +0200 (CEST) Subject: [Mplayer-users] Translations In-Reply-To: <20010721213653.A5438@woodstock.localdomain> Message-ID: > It's the Question that drives us, Andr? Dahlqvist : > > or you translate nothing. > Nothing? Good idea, I hate to translate DOCS to hungarian anyways :) Yeah. Polish translation is now frozen. have a nice day. -- Dariusz Pietrzak Excuse me, I'm cixelsyd today _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Mon Jul 23 12:03:55 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Mon, 23 Jul 2001 12:03:55 +0200 (CEST) Subject: [Mplayer-users] dirty ideas to speedup libMP3 In-Reply-To: <200107230734.f6N7YZB06937@pheidippides.md.chalmers.se> Message-ID: > I found that on slow CPUs (and I mean slooooooow like mine), MP3 Audio > eats a lot of CPU time (up to 50%, it can't skip & often no MMX and/or 3dnow) I how 'bout decoding mp3 to wav before playing the movie? -- Dariusz Pietrzak Excuse me, I'm cixelsyd today _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 23 12:09:48 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 23 Jul 2001 12:09:48 +0200 (CEST) Subject: [Mplayer-users] cyrillic fonts In-Reply-To: <3B5BEC4F.6AD6A6BA@talex.com.pl> Message-ID: <200107231009.MAA42308@thot.banki.hu> Hi, > Arpi wrote: > > > > > Expect much improved release soon :) > > Waiting! I wanna include it in the next release. > > Could you throw into incoming fonts that were used to create arpi_osd*.raw and > arpi_progress*.raw, so that subfont could render all glyphs for Mplayer. > they weren't created from fonts. they are drawn by Chass with photoshop... someone should create a TTF font with these symbols... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Mon Jul 23 12:05:53 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Mon, 23 Jul 2001 12:05:53 +0200 (CEST) Subject: [Mplayer-users] subtitles In-Reply-To: Message-ID: > nope. strange thing is, this happened with only that video. i tried it with > another and it is fine. aaah, now I undesrtand why it's so strange! -- Dariusz Pietrzak Excuse me, I'm cixelsyd today _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Mon Jul 23 12:16:55 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Mon, 23 Jul 2001 12:16:55 +0200 (MET DST) Subject: [Mplayer-users] dirty ideas to speedup libMP3 Message-ID: <200107231016.f6NAGtB11286@pheidippides.md.chalmers.se> >> I found that on slow CPUs (and I mean slooooooow like mine), MP3 Audio >> eats a lot of CPU time (up to 50%, it can't skip & often no MMX and/or 3dnow) I >how 'bout decoding mp3 to wav before playing the movie? Oh... boooring! Anybody can do that! I'd rather prefer a real-time version. I don't want to have another >700MB file on harddisk, just because my girl friends computer is too slow to play the mp3-version. Or is there an option in mplayer to play a different audio-file than present in the video stream? Like "hearable subtitles" or "dubbed version"? gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Mon Jul 23 12:32:56 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Mon, 23 Jul 2001 13:32:56 +0300 (EEST) Subject: [Mplayer-users] dirty ideas to speedup libMP3 In-Reply-To: <200107231016.f6NAGtB11286@pheidippides.md.chalmers.se> Message-ID: On Mon, 23 Jul 2001, Christoph Lampert wrote: > >> I found that on slow CPUs (and I mean slooooooow like mine), MP3 Audio > >> eats a lot of CPU time (up to 50%, it can't skip & often no MMX and/or 3dnow) > I > >how 'bout decoding mp3 to wav before playing the movie? > > Oh... boooring! Anybody can do that! I'd rather prefer a real-time version. i didn't get it. the CPU is too slow to play it in real time, so you'd prefer it to play it... in real time?? _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From adamrudolf at yahoo.com Mon Jul 23 12:37:38 2001 From: adamrudolf at yahoo.com (Adam Bertil) Date: Mon, 23 Jul 2001 03:37:38 -0700 (PDT) Subject: [Mplayer-users] Re: Bugreport-voodoo3 rh7.1 and xvideo - voodoo3 tv out?! Message-ID: <20010723103738.17823.qmail@web3903.mail.yahoo.com> Hello! Yes its the xfre4.03 that has problems with xv. I looked at xfree cvs page the 4.1.0a is the fixed xfree version http://www.xfree86.org/cvs/changes_4_1.html I compiled xfree4.1+copied the tdfx directory from cvs to xfree 4.1 tree(dont ask - but if you still want to know i use a windows box as a proxy - due to winmodem...) It works fine now using xfree and i get 30% CPU usage when playing he Matrix: Trailer 544 X 368, 15.3MB Sound: 48KHz, 96Kbps MP3 Stereo downloaded from http://divxwrld.cjb.net/ This is using an amdk3-450 is this good? Somebody mentioned the were using voodoo3 and tvout(i have a voodoo3 with tv-out) how does your xfree server config looks like? Do i need more software to get that combination working? Anyway thanks for the help and replys! bye Adam __________________________________________________ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Mon Jul 23 12:45:39 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Mon, 23 Jul 2001 12:45:39 +0200 (MET DST) Subject: [Mplayer-users] dirty ideas to speedup libMP3 Message-ID: <200107231045.f6NAjdB11943@pheidippides.md.chalmers.se> >> Oh... boooring! Anybody can do that! I'd rather prefer a real-time version. > >i didn't get it. the CPU is too slow to play it in real time, so you'd prefer >it to play it... in real time?? Yes, that's exactly my point :-) Let me explain in detail: My CPU is too slow to play the video, so mplayer used -framedrop (or even -hardframedrop) to skip parts of the video, either by not copying them to video memory or simply by not decode them. The picture does not run as smoothly, but it runs. That's not reasonable with sound (as discussed earlier) because skipping sound is much worse to the human senses than skipping picture. But you may also have noticed, that low-bitrate video needs less CPU to be decoded than high-bitrate and the same with audio: low-bitrate MP3 decode faster than high-bitrate. So I am looking for an algorithm to: Either reduce the bitrate of the audio stream _before_ decoding it (e.g. by decoding only every second byte, yes, that will not work, but just as a metaphor), or decode only parts of the audio stream (e.g. when doing inverse cosine transformation "forget" about the highest frequencies) Both would be faster with reduced audio quality, but not result in skipping sound, which is horrible to listen to. I'm not a MP3-expert, but something like that should be possible... if not 1) which depend heavily on file format, than at least 2)... Whom can I ask about mp3lib-decoding routines? gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From artur.zaprzala at talex.com.pl Mon Jul 23 12:48:38 2001 From: artur.zaprzala at talex.com.pl (Artur Zaprzala) Date: Mon, 23 Jul 2001 12:48:38 +0200 Subject: [Mplayer-users] cyrillic fonts References: <200107231009.MAA42308@thot.banki.hu> Message-ID: <3B5C0106.75D433F1@talex.com.pl> > they weren't created from fonts. they are drawn by Chass with photoshop... > > someone should create a TTF font with these symbols... > I can create Type 1 font with these symbols. All I need is vectorial description. I have already started working on this. Artur Zaprzala _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jesse_hepburn at yahoo.com Mon Jul 23 12:52:52 2001 From: jesse_hepburn at yahoo.com (Jesse Hepburn) Date: Mon, 23 Jul 2001 12:52:52 +0200 Subject: [Mplayer-users] dirty ideas to speedup libMP3 In-Reply-To: <200107231045.f6NAjdB11943@pheidippides.md.chalmers.se> Message-ID: <024101c11365$9f12f950$43aedf8a@HCRP1692> It should be possible to downmix the audio (to mono, perhaps?) I remember winamp (I know, I know...) having settings where you could downmix to 1/2 or 1/4 bitrate if you had a slow-ass computer... -----Original Message----- From: mplayer-users-admin at lists.sourceforge.net [mailto:mplayer-users-admin at lists.sourceforge.net] On Behalf Of Christoph Lampert Sent: Monday, July 23, 2001 12:46 PM To: mplayer-users at lists.sourceforge.net Subject: Re: [Mplayer-users] dirty ideas to speedup libMP3 >> Oh... boooring! Anybody can do that! I'd rather prefer a real-time version. > >i didn't get it. the CPU is too slow to play it in real time, so you'd prefer >it to play it... in real time?? Yes, that's exactly my point :-) Let me explain in detail: My CPU is too slow to play the video, so mplayer used -framedrop (or even -hardframedrop) to skip parts of the video, either by not copying them to video memory or simply by not decode them. The picture does not run as smoothly, but it runs. That's not reasonable with sound (as discussed earlier) because skipping sound is much worse to the human senses than skipping picture. But you may also have noticed, that low-bitrate video needs less CPU to be decoded than high-bitrate and the same with audio: low-bitrate MP3 decode faster than high-bitrate. So I am looking for an algorithm to: Either reduce the bitrate of the audio stream _before_ decoding it (e.g. by decoding only every second byte, yes, that will not work, but just as a metaphor), or decode only parts of the audio stream (e.g. when doing inverse cosine transformation "forget" about the highest frequencies) Both would be faster with reduced audio quality, but not result in skipping sound, which is horrible to listen to. I'm not a MP3-expert, but something like that should be possible... if not 1) which depend heavily on file format, than at least 2)... Whom can I ask about mp3lib-decoding routines? gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Mon Jul 23 13:06:14 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Mon, 23 Jul 2001 13:06:14 +0200 (MET DST) Subject: [Mplayer-users] dirty ideas to speedup libMP3 Message-ID: <200107231106.f6NB6EB12522@pheidippides.md.chalmers.se> > >It should be possible to downmix the audio (to mono, perhaps?) >I remember winamp (I know, I know...) having settings where you could >downmix to 1/2 or 1/4 bitrate if you had a slow-ass computer... Yes, but does it work on non-decoded data, i.e. is it really _faster_ then? Because mpg123 gets _slower_ by this... gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jesse_hepburn at yahoo.com Mon Jul 23 13:09:44 2001 From: jesse_hepburn at yahoo.com (Jesse Hepburn) Date: Mon, 23 Jul 2001 13:09:44 +0200 Subject: [Mplayer-users] dirty ideas to speedup libMP3 In-Reply-To: <200107231106.f6NB6EB12522@pheidippides.md.chalmers.se> Message-ID: <024601c11367$fa83deb0$43aedf8a@HCRP1692> It let me play mp3s on a 486, so I'm guessing it was faster... -----Original Message----- From: mplayer-users-admin at lists.sourceforge.net [mailto:mplayer-users-admin at lists.sourceforge.net] On Behalf Of Christoph Lampert Sent: Monday, July 23, 2001 1:06 PM To: mplayer-users at lists.sourceforge.net Subject: RE: [Mplayer-users] dirty ideas to speedup libMP3 > >It should be possible to downmix the audio (to mono, perhaps?) >I remember winamp (I know, I know...) having settings where you could >downmix to 1/2 or 1/4 bitrate if you had a slow-ass computer... Yes, but does it work on non-decoded data, i.e. is it really _faster_ then? Because mpg123 gets _slower_ by this... gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From flohr at itp.uni-hannover.de Mon Jul 23 13:25:41 2001 From: flohr at itp.uni-hannover.de (Michael Flohr) Date: Mon, 23 Jul 2001 13:25:41 +0200 Subject: [Mplayer-users] Very low audio volume Message-ID: <3B5C09B5.F8120653@itp.uni-hannover.de> Hi, just compiled MPlayer 0.18pre. It works great. However, I noticed one very strange thing I can't explain. When playing AVI files, the sound volume is EXTREMELY low. Pushing master and pcm to max makes sound barely audible. Playing the same files with aviplay, sound is normal, although overall movie quality and preformance seems to be not as good as MPlayer's. Did anyone notice something similar? By the way: I run alsa0.5.10, but I use "-ao oss" for sound output since "-ao alsa5" disables sound with an error roughly like "alsa-init: ... invalid parameters ..." (Sorry, I am on another machine right now, I cannot reproduce the precise error message here). That is also a bit strange to me. Soundacard is cs146x (Crystal Fusion). I usually have no problems with sound. Otherwise: Really great work! Michael _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From leitner at convergence.de Mon Jul 23 13:31:07 2001 From: leitner at convergence.de (Felix von Leitner) Date: Mon, 23 Jul 2001 13:31:07 +0200 Subject: [Mplayer-users] Re: Intel Music Coder working In-Reply-To: <20010721155347.A27125@sci.fi> Message-ID: <20010723133107.B8593@convergence.de> Thus spake Anssi Saari (as at sci.fi): > > can you please upload some samples to ftp://mplayer.dev.hu ? > Ok. It's smut, I hope you don't mind. STsKlassFist-1a.avi. Hahaha, I'm sure the traffic will increase tenfold now! ;-) Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From leitner at convergence.de Mon Jul 23 13:40:10 2001 From: leitner at convergence.de (Felix von Leitner) Date: Mon, 23 Jul 2001 13:40:10 +0200 Subject: [Mplayer-users] dirty ideas to speedup libMP3 In-Reply-To: <200107230734.f6N7YZB06937@pheidippides.md.chalmers.se> Message-ID: <20010723134010.E8593@convergence.de> Thus spake Christoph Lampert (lampert at math.chalmers.se): > I found that on slow CPUs (and I mean slooooooow like mine), MP3 Audio > eats a lot of CPU time (up to 50%, it can't skip & often no MMX and/or 3dnow) I > am looking for a way to speed this up. How can you expect good video playback when half your CPU is busy with mp3 playback? Get a decent CPU, I say. An Athlon 1330 MHz currently costs <200 Euro. This is so dirt cheap, there is really no excuse to have crappy hardware anymore. ;) Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Mon Jul 23 13:56:10 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Mon, 23 Jul 2001 13:56:10 +0200 (MET DST) Subject: [Mplayer-users] dirty ideas to speedup libMP3 Message-ID: <200107231156.f6NBuBB14798@pheidippides.md.chalmers.se> >Thus spake Christoph Lampert (lampert at math.chalmers.se): >> I found that on slow CPUs (and I mean slooooooow like mine), MP3 Audio >> eats a lot of CPU time (up to 50%, it can't skip & often no MMX and/or 3dnow) I >> am looking for a way to speed this up. > >How can you expect good video playback when half your CPU is busy with >mp3 playback? Get a decent CPU, I say. > >An Athlon 1330 MHz currently costs <200 Euro. This is so dirt cheap, >there is really no excuse to have crappy hardware anymore. ;) I'm not talking about DVD 720x480. I talk about 320x240 Simpsons episodes in DivX. They run fine (with a little bit of frameskip) on my K6/200 (sorry Dariusz, I removed your K6-2 again, it was too much MMX-trouble.) However some people seem to believe you need 128 or 96kbit audio for watching cartoons, and that's when it gets too slow... I'll buy my new machines in September, dual-AthlonMP, but I certainly won't do that now and not in Sweden with 25% VAT. But even after that, it's a matter of principle. gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Mon Jul 23 14:06:19 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Mon, 23 Jul 2001 14:06:19 +0200 (MET DST) Subject: [Mplayer-users] dirty ideas to speedup libMP3 Message-ID: <200107231206.f6NC6JB15350@pheidippides.md.chalmers.se> >It should be possible to downmix the audio (to mono, perhaps?) >I remember winamp (I know, I know...) having settings where you could >downmix to 1/2 or 1/4 bitrate if you had a slow-ass computer... Indead, I tried with mpg123. It has setting -2 and -4 to downsample (not bitrate, but samplingfreq. from 44kHz to 22kHz or even 11kHz). That speeds things up by 25 or 40%! With extra -m for mono it was almost 60% speedup! Is something like this possible with mp3lib ? Or already included, and just not used? gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 23 14:11:25 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 23 Jul 2001 14:11:25 +0200 (CEST) Subject: [Mplayer-users] dirty ideas to speedup libMP3 In-Reply-To: <200107231106.f6NB6EB12522@pheidippides.md.chalmers.se> Message-ID: <200107231211.OAA21980@thot.banki.hu> Hi, > > > >It should be possible to downmix the audio (to mono, perhaps?) > >I remember winamp (I know, I know...) having settings where you could > >downmix to 1/2 or 1/4 bitrate if you had a slow-ass computer... > > Yes, but does it work on non-decoded data, i.e. is it really _faster_ > then? Because mpg123 gets _slower_ by this... I'm not an mp3 expert, but AFAIK it uses huffman to code quantized values. So you have to decode every bit of the file to get quants, you can't skip or speedup this part. (huffman is prefixed coding, so you have to decode a symbol to get position of the next) The only thing you can trick with, is the sampling rate. If you decode 44khz samples to 22khz, you can skip quantized values of high frequenzies. But the audio will be ugly... Btw divx decoding eats >10 times more decoding than mp3, so you should focus on that. Maybe transcoding to mpeg1 before playing the movie? This way it gets about 2-4 times bigger but playable realtime even on p166mmx. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Mon Jul 23 14:19:49 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Mon, 23 Jul 2001 14:19:49 +0200 Subject: [Mplayer-users] dirty ideas to speedup libMP3 In-Reply-To: <20010723134010.E8593@convergence.de> References: <20010723134010.E8593@convergence.de> Message-ID: <20010723141949.A2449@telia.com> Felix von Leitner wrote: > An Athlon 1330 MHz currently costs <200 Euro. This is so dirt cheap, > there is really no excuse to have crappy hardware anymore. ;) Sure the CPU is cheap, but you can't just buy a new CPU if you currently have a PII system or similar. It also requires a new motherboard and to really use it's potential you need new memory. Now it's not so cheap anymore. -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 23 14:16:56 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 23 Jul 2001 14:16:56 +0200 (CEST) Subject: [Mplayer-users] Re: Intel Music Coder working In-Reply-To: <20010723133107.B8593@convergence.de> Message-ID: <200107231216.OAA21950@thot.banki.hu> Hi, > Thus spake Anssi Saari (as at sci.fi): > > > can you please upload some samples to ftp://mplayer.dev.hu ? > > Ok. It's smut, I hope you don't mind. STsKlassFist-1a.avi. > > Hahaha, I'm sure the traffic will increase tenfold now! ;-) it's already too high... got 34GB output from this site in this month... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Mon Jul 23 14:26:53 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Mon, 23 Jul 2001 14:26:53 +0200 Subject: [Mplayer-users] dirty ideas to speedup libMP3 In-Reply-To: <200107230734.f6N7YZB06937@pheidippides.md.chalmers.se> References: <200107230734.f6N7YZB06937@pheidippides.md.chalmers.se> Message-ID: <1519026950.20010723142653@gmx.de> Hello Christoph, Monday, July 23, 2001, 9:34:35 AM, you wrote: > Hi, > I found that on slow CPUs (and I mean slooooooow like mine), MP3 Audio > eats a lot of CPU time (up to 50%, it can't skip & often no MMX and/or 3dnow) I > am looking for a way to speed this up. > Would it be possible to > 1) preprocess audio data (uncompressed) to get a lower bitrate? like half or so? > 2) process audio bitstream only partially, e.g. drop the highest frequencies, > s.th. quality gets lower, but decoding faster? MPEG decoder from Nullsoft's WinAMP supports quality settings for slower cpus it says: Qualiy (Full/Half/Quarter): Selecting Half or Quarter quality will downsample the output, resulting in less processor usage. Maybe implementation of such feature in mp3lib would be possible. And saw FHGs win32 mpeg decoder shipped with mpplayer codecs package also support downsampling (says Frequency Full/Half/Quarte in Properties page), also supports changing resolution from 16bit to 8bit. So if we lookup the right registry key we could also change that options under wine loader. > gruel -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Mon Jul 23 14:26:00 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Mon, 23 Jul 2001 14:26:00 +0200 (MET DST) Subject: [Mplayer-users] dirty ideas to speedup libMP3 Message-ID: <200107231226.f6NCQ0B15998@pheidippides.md.chalmers.se> Hi Andre! >Felix von Leitner wrote: > >> An Athlon 1330 MHz currently costs <200 Euro. This is so dirt cheap, >> there is really no excuse to have crappy hardware anymore. ;) > >Sure the CPU is cheap, but you can't just buy a new CPU if you currently >have a PII system or similar. It also requires a new motherboard and to >really use it's potential you need new memory. Now it's not so cheap >anymore. Especially in sweden ;-) gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Mon Jul 23 14:29:20 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Mon, 23 Jul 2001 14:29:20 +0200 Subject: [Mplayer-users] dirty ideas to speedup libMP3 In-Reply-To: <200107230734.f6N7YZB06937@pheidippides.md.chalmers.se> References: <200107230734.f6N7YZB06937@pheidippides.md.chalmers.se> Message-ID: <119174612.20010723142920@gmx.de> Hello Christoph, Monday, July 23, 2001, 9:34:35 AM, you wrote: > Hi, > I found that on slow CPUs (and I mean slooooooow like mine), MP3 Audio > eats a lot of CPU time (up to 50%, it can't skip & often no MMX and/or 3dnow) I > am looking for a way to speed this up. > Would it be possible to > 1) preprocess audio data (uncompressed) to get a lower bitrate? like half or so? > 2) process audio bitstream only partially, e.g. drop the highest frequencies, > s.th. quality gets lower, but decoding faster? there's another thing I forgot, both FHG and WinAMP codec support downmixing to mono, which reduces cpu usage fpr stereo mp3 sound. > gruel -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Mon Jul 23 14:31:04 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Mon, 23 Jul 2001 14:31:04 +0200 Subject: [Mplayer-users] Coyote.Ugly.Sample-highbitrate-atmos.avi In-Reply-To: <200107230758.JAA11860@thot.banki.hu> References: <200107230758.JAA11860@thot.banki.hu> Message-ID: <619277860.20010723143104@gmx.de> Hello Arpi, Monday, July 23, 2001, 9:58:36 AM, you wrote: > Hi, >> great, btw what about the video I upped to MPlayer/incoming/divx4beta/? have >> you asked gerard to fox it (imho height not multiple of 16 prob). > it's already fixed in new ffmpeg (0.4.5). > but it wasn't yet merged with Nick's optimized code... then could you please do so? =) > A'rpi / Astral & ESP-team -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 23 14:36:02 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 23 Jul 2001 14:36:02 +0200 (CEST) Subject: [Mplayer-users] Coyote.Ugly.Sample-highbitrate-atmos.avi In-Reply-To: <619277860.20010723143104@gmx.de> Message-ID: <200107231236.OAA33942@thot.banki.hu> Hi, > >> great, btw what about the video I upped to MPlayer/incoming/divx4beta/? have > >> you asked gerard to fox it (imho height not multiple of 16 prob). > > it's already fixed in new ffmpeg (0.4.5). > > but it wasn't yet merged with Nick's optimized code... > then could you please do so? =) no... :( i have no time for it now (very busy with commercial work, tomorrow deadline...) and the plan was to merge things in ffmpeg's cvs, and don't have 2 tree anymore. but gerard didn't accept all of optimizations, and also did some unwanted changes (for example, included libac3 in libavcodec, which conflicts with our) so i'm waiting for his answer. he should get all of changes, or we should keep 2 independnet tree :( A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Mon Jul 23 14:35:51 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Mon, 23 Jul 2001 14:35:51 +0200 (MET DST) Subject: [Mplayer-users] dirty ideas to speedup libMP3 Message-ID: <200107231235.f6NCZpB16262@pheidippides.md.chalmers.se> Hi Arpi, > >The only thing you can trick with, is the sampling rate. >If you decode 44khz samples to 22khz, you can skip quantized values of >high frequenzies. But the audio will be ugly... Not too bad... with regular MP3 files it's quite okay. Remember, it's cartoons and not "Jurassic Park". Anyhow if the question is "bad sound and skipping picture" or "nice sound, but no picture at all", then the choice is clear. >Btw divx decoding eats >10 times more decoding than mp3, so you should >focus on that. Maybe transcoding to mpeg1 before playing the movie? This way >it gets about 2-4 times bigger but playable realtime even on p166mmx. I thought so, too, but with (hard)framedropping DivX works quite fine. Nevertheless audio percentage it up to 40-50% CPU level on non-MMX machine P166. One these machines you need every cycle to keep video going, because with -framedrop and too high load, picture just stops :-( I also have some MPEGs with MP3 sound. I surely don't want to have them twice on my hard disk... What about the -mono business? Is that much work? This may not be interesting to Athlon users, but there always will be slow machines. Mplayer for Gameboy? Mplayer for microwaves? Why not? gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Mon Jul 23 14:37:46 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Mon, 23 Jul 2001 14:37:46 +0200 (MET DST) Subject: [Mplayer-users] dirty ideas to speedup libMP3 Message-ID: <200107231237.f6NCbkB16328@pheidippides.md.chalmers.se> > >And saw FHGs win32 mpeg decoder shipped with mpplayer codecs package >also support downsampling (says Frequency Full/Half/Quarte in >Properties page), also supports changing resolution from 16bit to 8bit. >So if we lookup the right registry key we could also change that >options under wine loader. Sounds cool! Resolution I don't know, but half/quarter freq. might be interesting. Is there something about mixing to mono as well? gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Gibraltargatan 86 | CTH, Matematiskt centrum rum 637 | Eklandagatan 86, rum 2235 41279 Gothenburg | 41296 Gothenburg SWEDEN | SWEDEN Email: gruel at gmx.de | Email: lampert at math.chalmers.se | Tel. +46 31 772 5323 (office) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Mon Jul 23 14:44:28 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Mon, 23 Jul 2001 14:44:28 +0200 Subject: [Mplayer-users] dirty ideas to speedup libMP3 In-Reply-To: <200107231211.OAA21980@thot.banki.hu> References: <200107231211.OAA21980@thot.banki.hu> Message-ID: <3510082127.20010723144428@gmx.de> Hello Arpi, Monday, July 23, 2001, 2:11:25 PM, you wrote: > Hi, >> > >> >It should be possible to downmix the audio (to mono, perhaps?) >> >I remember winamp (I know, I know...) having settings where you could >> >downmix to 1/2 or 1/4 bitrate if you had a slow-ass computer... >> >> Yes, but does it work on non-decoded data, i.e. is it really _faster_ >> then? Because mpg123 gets _slower_ by this... > I'm not an mp3 expert, but AFAIK it uses huffman to code quantized values. > So you have to decode every bit of the file to get quants, you can't > skip or speedup this part. > (huffman is prefixed coding, so you have to decode a symbol to get position > of the next) > The only thing you can trick with, is the sampling rate. > If you decode 44khz samples to 22khz, you can skip quantized values of > high frequenzies. But the audio will be ugly... tested with winamp here, it still sounds ok. > Btw divx decoding eats >10 times more decoding than mp3, so you should > focus on that. Maybe transcoding to mpeg1 before playing the movie? This way > it gets about 2-4 times bigger but playable realtime even on p166mmx. but it's not realtime then. > A'rpi / Astral & ESP-team -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Mon Jul 23 16:49:33 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Mon, 23 Jul 2001 16:49:33 +0200 Subject: [Mplayer-users] Fwd: Korrektur zu Ihrem Artikel ueber DVD-Player unter Linux (ENG: Correction to your article about DVD-Players on linux) In-Reply-To: <200107221311.f6MDBgd02752@alison.hemmet.chalmers.se> References: <14296575538.20010722134121@gmx.de> <200107221156.f6MBuiK01183@alison.hemmet.chalmers.se> <76101373577.20010722150119@gmx.de> <200107221311.f6MDBgd02752@alison.hemmet.chalmers.se> Message-ID: <5817586798.20010723164933@gmx.de> Hello Christoph, Sunday, July 22, 2001, 3:11:33 PM, you wrote: > Hi Felix, >> [...] >> Btw. Wouldn't I make up a good lawyer? =)) > A grrrrrrrrrrrrrrrrrrrrrrrrrrrrreat one! btw. got response today from the articles author telling he would correct it in one of the next c'ts. > gruel -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Mon Jul 23 17:07:34 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Mon, 23 Jul 2001 18:07:34 +0300 (EEST) Subject: [Mplayer-users] subfont creation with gimp Message-ID: i wrote a small perl-fu plug-in for gimp for subtitle font creation. it provides two functions, one renders a font (only chars from 33 to 255 - had some trouble with unicode support) creating two images (bitmap and alpha), the other only creating an alpha image from a grayscale image (for OSD chars and such). the first can be found in toolbox menu Xtra/MPlayer/Render Subfont, the other in Filters/MPlayer/Render Shadow. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 23 17:25:11 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 23 Jul 2001 17:25:11 +0200 (CEST) Subject: [Mplayer-users] subfont creation with gimp In-Reply-To: Message-ID: <200107231525.RAA54526@thot.banki.hu> Hi, > i wrote a small perl-fu plug-in for gimp for subtitle font creation. it > provides two functions, one renders a font (only chars from 33 to 255 - had > some trouble with unicode support) creating two images (bitmap and alpha), > the other only creating an alpha image from a grayscale image (for OSD chars > and such). the first can be found in toolbox menu Xtra/MPlayer/Render Subfont, > the other in Filters/MPlayer/Render Shadow. does it generate the .desc file too? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 23 17:27:48 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 23 Jul 2001 17:27:48 +0200 (CEST) Subject: [Mplayer-users] cyrillic fonts In-Reply-To: Message-ID: <200107231527.RAA11838@thot.banki.hu> Hi, > On Fri, 20 Jul 2001, [ISO-8859-1] Felix B?nemann wrote: > > > > when i finally managed to put my hands on the elusive cyrillic fonts (thanks, > > > arpi), it turned out that they're quite ugly. so i just made my own. they're > > > not a whole font like bgfont.zip, they're just the cyrillic letters and a > > > cyr.desc which takes the rest from arial-12. the resulting bundle is much > > > smaller and even looks better :) > > btw. theres a tool to create fonts in the TOOLS dir using freetype > > lib (haven#t teste it myself). > > i tried it, and found it uncomfortable to use. it generates a complete font, > while i just needed the cyrillic letters. also, it produces strangely uneven > spaces between the characters - sometimes putting them so close together so It's because new OSD code requires chars to be 8-pixel aligned (horizontal position). Btw distance between chars is configurable with both char generators. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Mon Jul 23 17:42:24 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Mon, 23 Jul 2001 18:42:24 +0300 (EEST) Subject: [Mplayer-users] subfont creation with gimp In-Reply-To: <200107231525.RAA54526@thot.banki.hu> Message-ID: On Mon, 23 Jul 2001, Arpi wrote: > Hi, > > > i wrote a small perl-fu plug-in for gimp for subtitle font creation. it > > provides two functions, one renders a font (only chars from 33 to 255 - had > > some trouble with unicode support) creating two images (bitmap and alpha), > > the other only creating an alpha image from a grayscale image (for OSD chars > > and such). the first can be found in toolbox menu Xtra/MPlayer/Render Subfont, > > the other in Filters/MPlayer/Render Shadow. > > does it generate the .desc file too? no - i'm writting a standalone .desc generator now. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Mon Jul 23 23:54:11 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Mon, 23 Jul 2001 21:54:11 +0000 (:) Subject: [Mplayer-users] Radeon VE Message-ID: Hi, Christoph Lampert! On 2001-07-23 10:23:37 you wrote: >Hi, > >anyone using ATI Radeon VE card? Is there any way of getting > >1) XFree >2) XVideo (-vo xv) >3) DVI-port >4) TVout >5) multi screen > >to work with mplayer? Any experience with framebuffer and/or X-on-framebuffer? Try this: http://www.linuxvideo.org/gatos Best regards! Nick (2001-07-23 19:09:46) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From luca at lucarella.com.ar Mon Jul 23 20:26:09 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Mon, 23 Jul 2001 15:26:09 -0300 (ART) Subject: [Mplayer-users] New features... In-Reply-To: References: Message-ID: <200107231928.PAA08756@burns.luca.2y.net> El Mon, 23 Jul 2001 09:12:12 +0300 (EEST) lanzz at lanzz.org escribi?: > > > I asked this before, but maybe times have changed... > > since everybody is asking for features, here i am: > > why aren't the subtitle fonts installed system-wide? it's good to be > able to override them with a ~/.mplayer/font directory, but having ONLY > that doesn't seem right. Agree! Idem with codecs.conf -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Mon Jul 23 20:39:08 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Mon, 23 Jul 2001 20:39:08 +0200 Subject: [Mplayer-users] popular References: <200106122259.AAA12274@thot.banki.hu> Message-ID: <000701c113a6$c596d560$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* Hi ... did you already know, MPlayer is the second popular project after the Linux kernel on freshmeat ! look here http://freshmeat.net/stats/#popularity mfg Johannes ----- Original Message ----- From: "Arpi" To: Sent: Wednesday, June 13, 2001 12:59 AM Subject: Re: [Mplayer-users] Request for added hardware support !?! > *This message was transferred with a trial version of CommuniGate(tm) Pro* > Hi, > > > I would like to ask, whether the following components could be > > supported in the future by mplayer: > > > > Siemens DVB-satellite card (hardware MPEG2-Decoder) > > DeviceDriver http://linuxtv.org/dvb > > VDR Project http://www.cadsoft.de/people/kls/vdr/index.htm > > DVDPlayer http://www2.arnes.si/~mthale1/index.html > > > > Soundcards with CMedia CMI 8783 soundchip > > > > DeviceDriver: http://www.cmedia.com.tw > > > > That would be great:) > > Not planned. And won't be done, except if > - you denote us such hardware or > - someone send patches > > > A'rpi / Astral & ESP-team > > -- > mailto:arpi at thot.banki.hu > http://esp-team.scene.hu > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Mon Jul 23 21:35:02 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Mon, 23 Jul 2001 21:35:02 +0200 Subject: [Mplayer-users] popular In-Reply-To: <000701c113a6$c596d560$6400a8c0@p3> References: <200106122259.AAA12274@thot.banki.hu> <000701c113a6$c596d560$6400a8c0@p3> Message-ID: <200107231935.f6NJZ3X26672@alison.hemmet.chalmers.se> Am Montag, 23. Juli 2001 20:39 schrieben Sie: > *This message was transferred with a trial version of CommuniGate(tm) Pro* > Hi ... > > did you already know, > MPlayer is the second popular project after the Linux kernel on freshmeat ! > Now, how did you manipulate this??? gruel _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Mon Jul 23 21:32:50 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Mon, 23 Jul 2001 21:32:50 +0200 Subject: [Mplayer-users] popular In-Reply-To: <000701c113a6$c596d560$6400a8c0@p3> References: <200106122259.AAA12274@thot.banki.hu> <000701c113a6$c596d560$6400a8c0@p3> Message-ID: <5434584459.20010723213250@gmx.de> Hello Johannes, Monday, July 23, 2001, 8:39:08 PM, you wrote: > *This message was transferred with a trial version of CommuniGate(tm) Pro* > Hi ... > did you already know, > MPlayer is the second popular project after the Linux kernel on freshmeat ! > look here > http://freshmeat.net/stats/#popularity great :) > mfg Johannes -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Mon Jul 23 21:36:37 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Mon, 23 Jul 2001 21:36:37 +0200 Subject: [Mplayer-users] popular References: <200106122259.AAA12274@thot.banki.hu> <000701c113a6$c596d560$6400a8c0@p3> <200107231935.f6NJZ3X26672@alison.hemmet.chalmers.se> Message-ID: <000f01c113ae$cca2e7b0$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* well, i didn't manipulate the popularity ... i manipulated the new "Raking", i think everbody should do that ;-) look here http://freshmeat.net/projects/mplayer/ (I have already correct links and added releases ...) mfg Johannes > Now, how did you manipulate this??? _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Mon Jul 23 21:54:35 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Mon, 23 Jul 2001 21:54:35 +0200 Subject: [Mplayer-users] popular In-Reply-To: <000f01c113ae$cca2e7b0$6400a8c0@p3> References: <200106122259.AAA12274@thot.banki.hu> <200107231935.f6NJZ3X26672@alison.hemmet.chalmers.se> <000f01c113ae$cca2e7b0$6400a8c0@p3> Message-ID: <200107231954.f6NJsaW28467@alison.hemmet.chalmers.se> Am Montag, 23. Juli 2001 21:36 schrieben Sie: > *This message was transferred with a trial version of CommuniGate(tm) Pro* > well, i didn't manipulate the popularity ... > > i manipulated the new "Raking", i think everbody should do that ;-) > Cheater! Cheater! gruel _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 23 21:45:27 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 23 Jul 2001 21:45:27 +0200 (CEST) Subject: [Mplayer-users] New features... In-Reply-To: <200107231928.PAA08756@burns.luca.2y.net> Message-ID: <200107231945.VAA56048@thot.banki.hu> Hi, > El Mon, 23 Jul 2001 09:12:12 +0300 (EEST) lanzz at lanzz.org escribi?: > > > > > I asked this before, but maybe times have changed... > > > > since everybody is asking for features, here i am: > > > > why aren't the subtitle fonts installed system-wide? it's good to be > > able to override them with a ~/.mplayer/font directory, but having ONLY > > that doesn't seem right. > > Agree! Idem with codecs.conf do you use CVS version? it's already done by Vladimir. (patch applied about a week ago) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 23 21:54:38 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 23 Jul 2001 21:54:38 +0200 (CEST) Subject: [Mplayer-users] popular In-Reply-To: <000f01c113ae$cca2e7b0$6400a8c0@p3> Message-ID: <200107231954.VAA27792@thot.banki.hu> Hi, > *This message was transferred with a trial version of CommuniGate(tm) Pro* > well, i didn't manipulate the popularity ... > > i manipulated the new "Raking", i think everbody should do that ;-) > what did you do? i don't understand... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From asalamon at elender.hu Mon Jul 23 22:24:14 2001 From: asalamon at elender.hu (Andras Salamon) Date: Mon, 23 Jul 2001 22:24:14 +0200 (CEST) Subject: [Mplayer-users] sdl:dga problem Message-ID: Hi, When I try to play an mpeg file using -vo sdl:dga, I get a black screen, with a very small green rectangle in the upper left corner. If I press C a few times (3-4), then I can see the movie. -vo sdl:dga -zoom is the same -vo sdl:dga -fs is the same, but pressing C can't help. -vo sdl:dga -vm gives error message: MPlayer interrupted by signal 11 in module: flip_page If I'm using -vo dga, it's ok. I'm using SDL 1.2.0, other infos in the attachment. Should I upload the (beginning of the) file? Sala -------------- next part -------------- A non-text attachment was scrubbed... Name: mplayer.log Type: application/octet-stream Size: 8087 bytes Desc: Mplayer log URL: -------------- next part -------------- 1. The system info what we always want: - linux distribution Mandrake 7.2 (a few packages from 8.0) - kernel version: 2.4.0 - libc version: 2.2 - X version: 4.1.0 - gcc and ld version: 2.95.3 2.10.90 - binutils version: 2.10.90 2. Hardware & drivers: - CPU info: cat /proc/cpuinfo: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Celeron (Coppermine) stepping : 6 cpu MHz : 798.657 cache size : 128 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1595.80 - video card manufacturer and model examples: ASUS V3800M chip: nVidia TNT2 (M64) 32MB - video driver type&version nvidia 1.0-1251 - sound card type & driver GUS PnP with ALSA (0.5.10) OSS emulation From arpi at thot.banki.hu Tue Jul 24 00:16:36 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 24 Jul 2001 00:16:36 +0200 (CEST) Subject: [Mplayer-users] new ffmpeg/libavcodec Message-ID: <200107232216.AAA35302@thot.banki.hu> Hi, Gerard Lantau just merged & fixed some things of libavcodec in ffmpeg's CVS to get it working well wiht MPlayer. I didn't updated (or removed) old version in MPlayer tree, because it may contains some optimization not yet merged into ffmpeg tree. (I hope that Nick will do it soon) Please try the new lib! It plays those problematic fivx files which are wrong with old libavcodec and projectmayo's divx4linux. 1. get latest mplayer from cvs. 2. get ffmpeg from cvs: cvs -d:pserver:anonymous at cvs.ffmpeg.sourceforge.net:/cvsroot/ffmpeg login (press enter for password) cvs -d:pserver:anonymous at cvs.ffmpeg.sourceforge.net:/cvsroot/ffmpeg co ffmpeg 3. replace libavcodec dir in mplayer tree with the new one from ffmpeg tree. warning: symlink is NOT enough! (include ../config.mak will point to ffmpeg's config.mak instead of mplayer's config.mak if you're using symlink) so, copy/move libavcodec to mplayer. 4. compile mplayer: ./configure ; make A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From maxk at qualcomm.com Tue Jul 24 00:27:51 2001 From: maxk at qualcomm.com (Maksim Krasnyanskiy) Date: Mon, 23 Jul 2001 15:27:51 -0700 Subject: [Mplayer-users] [PATCH] Support for ARM platform and some Makefile improvements In-Reply-To: <01072100510109.00511@astral> References: <4.3.1.0.20010718170835.0329d7b0@mail1> <4.3.1.0.20010718170835.0329d7b0@mail1> Message-ID: <4.3.1.0.20010723151430.054cbe60@mail1> Felix, >I've tested patch amd it has lots of failed hunks, which I list below, as you >say you are using current cvs, make sure you didn't use any switches to >receive older revisions in the past as those settings will be saved. Hmm, I did an update and got a couple of failed hunks. >Additionally I see lots of cosmetic changes which are unwanted in the patch >(ie. breaking up long lines, removing tabs and stuff), we only want the stuff >needed to support StrongARM in mplayer, nothin more, nothing less ;) Ok. >So I advise you to get latest MPlayer cvs tree, apply only the changes needed >and then resend new clean patch. Here we go: btdemo1:/tmp>cvs -z9 -d:pserver:anonymous at mp.dev.hu:/cvsroot/mplayer co -d mplayer main btdemo1:/tmp>cd mplayer btdemo1:/tmp/mplayer>./version.sh btdemo1:/tmp/mplayer>cat version.h #define VERSION "0.17cvs-010723-15:11" btdemo1:/tmp/mplayer>zcat ../mplayer_ipaq_patch.gz | patch -p0 patching file Makefile patching file configure patching file TOOLS/mpfc/Makefile patching file TVout/fbset/Makefile patching file drivers/Makefile patching file drivers/syncfb/Makefile patching file libavcodec/Makefile Looks clean to me. Compiles and cross-compiles just fine for x86 and ipaq. Attached. Max -------------- next part -------------- A non-text attachment was scrubbed... Name: mplayer_ipaq_patch.gz Type: application/octet-stream Size: 3785 bytes Desc: not available URL: -------------- next part -------------- Maksim Krasnyanskiy Senior Kernel Engineer Qualcomm Incorporated maxk at qualcomm.com http://bluez.sf.net http://vtun.sf.net From luca at lucarella.com.ar Tue Jul 24 00:53:00 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Mon, 23 Jul 2001 19:53:00 -0300 (ART) Subject: [Mplayer-users] New features... In-Reply-To: <200107231945.VAA56048@thot.banki.hu> References: <200107231945.VAA56048@thot.banki.hu> Message-ID: <200107232355.TAA09067@burns.luca.2y.net> El Mon, 23 Jul 2001 21:45:27 +0200 (CEST) Arpi escribi?: A> Hi, A> A> > El Mon, 23 Jul 2001 09:12:12 +0300 (EEST) lanzz at lanzz.org escribi?: A> > A> > > > > I asked this before, but maybe times have changed... A> > > A> > > since everybody is asking for features, here i am: A> > > A> > > why aren't the subtitle fonts installed system-wide? it's good to be A> > > able to override them with a ~/.mplayer/font directory, but having ONLY A> > > that doesn't seem right. A> > A> > Agree! Idem with codecs.conf A> A> do you use CVS version? A> it's already done by Vladimir. A> (patch applied about a week ago) nope! I'll grab the current cvs... ;) -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From henrik at graphics.stanford.edu Tue Jul 24 01:16:42 2001 From: henrik at graphics.stanford.edu (Henrik Wann Jensen) Date: Mon, 23 Jul 2001 16:16:42 -0700 (PDT) Subject: [Mplayer-users] Support for looping Message-ID: Is it possible to have animations loop continuously (similar to the default in xanim)? This would be great for showing animations at presentations. Something like 'mplayer -loop myanim.mpg' would be great. Other than that mplayer is very nice! -- Henrik _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From brendan at tjs.org Tue Jul 24 02:05:41 2001 From: brendan at tjs.org (brendan at tjs.org) Date: Mon, 23 Jul 2001 19:05:41 -0500 Subject: [Mplayer-users] Support for looping In-Reply-To: ; from henrik@graphics.stanford.edu on Mon, Jul 23, 2001 at 04:16:42PM -0700 References: Message-ID: <20010723190541.A21237@colby.tjs.org> On Mon, Jul 23, 2001 at 04:16:42PM -0700, Henrik Wann Jensen wrote: > > Is it possible to have animations loop continuously > (similar to the default in xanim)? This would be > great for showing animations at presentations. > Something like 'mplayer -loop myanim.mpg' would > be great. > > Other than that mplayer is very nice! > > -- Henrik > > Not possible right now, the current libvo can't reinit the video. Wait for libvo2, coming after .18 is released. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Tue Jul 24 07:15:37 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Tue, 24 Jul 2001 08:15:37 +0300 (EEST) Subject: [Mplayer-users] cyrillic fonts In-Reply-To: <200107231527.RAA11838@thot.banki.hu> Message-ID: On Mon, 23 Jul 2001, Arpi wrote: > It's because new OSD code requires chars to be 8-pixel aligned (horizontal > position). Btw distance between chars is configurable with both char > generators. can you tell me what exactly will be the requirements, so i can make the gimp plugin compatible with them? _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Mon Jul 23 22:20:18 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Mon, 23 Jul 2001 22:20:18 +0200 Subject: [Mplayer-users] popular In-Reply-To: <200107231954.VAA27792@thot.banki.hu> References: <200107231954.VAA27792@thot.banki.hu> Message-ID: <200107232020.f6NKKJ130903@alison.hemmet.chalmers.se> Am Montag, 23. Juli 2001 21:54 schrieben Sie: > Hi, > > > *This message was transferred with a trial version of CommuniGate(tm) > > Pro* well, i didn't manipulate the popularity ... > > > > i manipulated the new "Raking", i think everbody should do that ;-) > > what did you do? i don't understand... There is a new option "Ranking" on the freshmeat page, where you can give up to 10 points to every project. Johannes gave 10 out of 10 and is the only voter (was, until a few minutes ago), so MPlayer is the highest ranked program at all (together with a few others who had the same idea). A good part of the "Popularity" value seems to be based on the "Ranking", so MPlayer is very high there, even higher than the other 10/10 projects. I guess, from now on, it will only go further down with MPlayer's popularity... ;-) gruel _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Tue Jul 24 09:34:44 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Tue, 24 Jul 2001 10:34:44 +0300 (EEST) Subject: [Mplayer-users] gimp plugin again Message-ID: i modified my plugin according to arpi's information that the new OSD code will require characters starting at 8-byte aligned positions. also, it will now automatically generate a font.desc and save it and the two raw files at specified locations. ftp://mplayer.dev.hu/MPlayer/incoming/subfont-gimp-0.2.tar.bz2 _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Tue Jul 24 11:14:44 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Tue, 24 Jul 2001 11:14:44 +0200 Subject: [Mplayer-users] popular References: <200107231954.VAA27792@thot.banki.hu> <200107232020.f6NKKJ130903@alison.hemmet.chalmers.se> Message-ID: <001d01c11421$18706560$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* > A good part of the "Popularity" value seems to be based on the "Ranking", so > MPlayer is very high there, even higher than the other 10/10 projects. No !!! it isn't so ... thx popularity was also so, before I gave 10 Point .. Popularity=record hits * URL hits * subscriptions)^(1/3). see here: How do you measure popularity? by Patrick Lenz, in Projects - Sunday, July 22nd 2001 09:39 The popularity score superseded the old counters for record hits, URL hits and subscriptions. Popularity is calculated as (record hits * URL hits * subscriptions)^(1/3). Thanks to Johan Walles for his suggestions. mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Tue Jul 24 11:39:22 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Tue, 24 Jul 2001 11:39:22 +0200 Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <200107232216.AAA35302@thot.banki.hu> References: <200107232216.AAA35302@thot.banki.hu> Message-ID: <20010724113922.A44801@hoth.amu.edu.pl> On Tue, Jul 24, 2001 at 12:16:36AM +0200, Arpi wrote: > Hi, > > Gerard Lantau just merged & fixed some things of libavcodec > in ffmpeg's CVS to get it working well wiht MPlayer. > I didn't updated (or removed) old version in MPlayer tree, because > it may contains some optimization not yet merged into ffmpeg tree. > (I hope that Nick will do it soon) > > Please try the new lib! It plays those problematic fivx files > which are wrong with old libavcodec and projectmayo's divx4linux. broken1*.avi can be remove :)) current results: FreeBSD 4.3 AMD K6-2 333MHz + C&T CT65554 + Xv gcc version 2.95.3 [FreeBSD] 20010315 (release) XFree86 Version 4.1.0 / X Window System (800x600x24bpp) MMX + 3DNow -nosound -benchmark -osdlevel 2 [-vc divx|divxds|ffdivx] ffdivx history: 2001-07-06: first ffdivx 0.4.3 2001-07-10: fastmem (Nick) 2001-07-11: dsputil_mmx (Nick) 2001-07-12: dsputil 32bit (Jurgen) 2001-07-16: dsputil_mmx (Nick) 2001-07-18: dsputil 3DNow+mmx2 (Nick) 2001-07-20: mpegvideo mmx (Nick) 2001-07-21: mpegvideo insns+C (Nick) 2001-07-24: ffmpeg 0.4.5 merge Best Results: Space Cowboys trailer (145s): [DIV3] 480x200 24bpp 24.00 fps 154.3 kbps divx---010723: V: 26.601s VO: 8.711s A: 0.000s Sys: 17.093s = 52.406s divxds-010720: V: 27.631s VO: 10.465s A: 0.000s Sys: 20.189s = 58.285s divx4--010723: NA ffdivx-010706: V: 49.861s VO: 9.257s A: 0.000s Sys: 17.305s = 76.423s ffdivx-010710: V: 49.591s VO: 9.048s A: 0.000s Sys: 17.170s = 75.809s ffdivx-010711: V: 47.585s VO: 8.976s A: 0.000s Sys: 17.060s = 73.622s ffdivx-010712: V: 35.031s VO: 9.155s A: 0.000s Sys: 17.309s = 61.495s ffdivx-010716: V: 33.062s VO: 9.100s A: 0.000s Sys: 17.719s = 59.882s ffdivx-010718: V: 28.258s VO: 9.001s A: 0.000s Sys: 17.570s = 54.829s ffdivx-010720: V: 27.184s VO: 8.917s A: 0.000s Sys: 17.389s = 53.491s ffdivx-010721: V: 27.304s VO: 9.011s A: 0.000s Sys: 17.221s = 53.536s ffdivx-010724: V: 28.377s VO: 8.893s A: 0.000s Sys: 17.343s = 54.613s MI2 trailer (121s): [DIV3] 480x204 24bpp 24.00 fps 700.6 kbps divx---010720: V: 42.600s VO: 9.061s A: 0.000s Sys: 17.498s = 69.159s divxds-010720: V: 43.662s VO: 9.126s A: 0.000s Sys: 17.804s = 70.592s divx4--010723: NA ffdivx-010706: V: 63.671s VO: 9.333s A: 0.000s Sys: 18.321s = 91.325s ffdivx-010711: V: 59.441s VO: 9.137s A: 0.000s Sys: 18.229s = 86.808s ffdivx-010712: V: 52.497s VO: 9.582s A: 0.000s Sys: 18.179s = 80.258s ffdivx-010716: V: 51.008s VO: 9.193s A: 0.000s Sys: 18.575s = 78.776s ffdivx-010718: V: 44.379s VO: 9.120s A: 0.000s Sys: 18.210s = 71.709s ffdivx-010720: V: 43.802s VO: 9.166s A: 0.000s Sys: 18.314s = 71.283s ffdivx-010721: V: 43.284s VO: 9.157s A: 0.000s Sys: 18.205s = 70.646s ffdivx-010724: V: 43.953s VO: 9.141s A: 0.000s Sys: 18.283s = 71.377s Tomb Raider trailer (136s): [DIV3] 480x260 24bpp 24.00 fps 761.0 kbps divx---010720: V: 52.189s VO: 11.377s A: 0.000s Sys: 21.377s = 84.943s divxds-010720: V: 53.754s VO: 11.364s A: 0.000s Sys: 21.381s = 86.499s divx4--010723: NA ffdivx-010706: V: 75.025s VO: 11.877s A: 0.000s Sys: 22.034s = 108.936s ffdivx-010711: V: 69.263s VO: 11.751s A: 0.000s Sys: 21.967s = 102.980s ffdivx-010712: V: 60.255s VO: 11.892s A: 0.000s Sys: 21.754s = 93.901s ffdivx-010716: V: 58.367s VO: 11.770s A: 0.000s Sys: 22.604s = 92.742s ffdivx-010718: V: 52.474s VO: 11.585s A: 0.000s Sys: 22.201s = 86.261s ffdivx-010720: V: 51.125s VO: 11.678s A: 0.000s Sys: 21.904s = 84.707s ffdivx-010721: V: 50.546s VO: 11.740s A: 0.000s Sys: 21.793s = 84.079s ffdivx-010724: V: 51.398s VO: 11.529s A: 0.000s Sys: 21.886s = 84.814s Wing Commander trailer (68s): [DIV3] 640x360 24bpp 24.00 fps 846.9 kbps divx---010720: V: 43.329s VO: 10.451s A: 0.000s Sys: 19.470s = 73.250s divxds-010720: V: 44.259s VO: 10.484s A: 0.000s Sys: 19.487s = 74.229s divx4--010723: NA ffdivx-010706: V: 62.605s VO: 8.188s A: 0.000s Sys: 19.616s = 90.410s ffdivx-010711: V: 58.277s VO: 8.039s A: 0.000s Sys: 19.694s = 86.010s ffdivx-010712: V: 49.239s VO: 8.279s A: 0.000s Sys: 19.710s = 77.228s ffdivx-010716: V: 47.548s VO: 8.227s A: 0.000s Sys: 20.257s = 76.033s ffdivx-010718: V: 42.993s VO: 8.087s A: 0.000s Sys: 19.924s = 71.004s ffdivx-010720: V: 41.133s VO: 8.229s A: 0.000s Sys: 19.827s = 69.189s ffdivx-010721: V: 40.928s VO: 8.217s A: 0.000s Sys: 19.745s = 68.889s ffdivx-010724: V: 41.755s VO: 8.130s A: 0.000s Sys: 19.653s = 69.538s Dune trailer (60s): [DIV3] 624x356 24bpp 24.00 fps 1154.6 kbps divx---010720: V: 38.014s VO: 10.254s A: 0.000s Sys: 18.678s = 66.946s divxds-010720: V: 38.915s VO: 10.140s A: 0.000s Sys: 18.924s = 67.978s divx4--010723: NA ffdivx-010706: V: 62.498s VO: 10.769s A: 0.000s Sys: 19.103s = 92.370s ffdivx-010711: V: 59.567s VO: 10.737s A: 0.000s Sys: 19.008s = 89.311s ffdivx-010712: V: 49.407s VO: 10.802s A: 0.000s Sys: 19.342s = 79.552s ffdivx-010716: V: 47.516s VO: 10.784s A: 0.000s Sys: 19.464s = 77.764s ffdivx-010718: V: 41.251s VO: 10.627s A: 0.000s Sys: 19.503s = 71.381s ffdivx-010720: V: 42.206s VO: 10.650s A: 0.000s Sys: 19.344s = 72.201s ffdivx-010721: V: 42.094s VO: 10.597s A: 0.000s Sys: 19.207s = 71.899s ffdivx-010724: V: 43.293s VO: 10.688s A: 0.000s Sys: 19.224s = 73.205s Gladiator trailer (85s): [DIV3] 480x272 24bpp 24.00 fps 986.1 kbps divx---010720: V: 38.197s VO: 9.118s A: 0.000s Sys: 16.341s = 63.656s divxds-010720: V: 39.719s VO: 9.148s A: 0.000s Sys: 16.095s = 64.961s divx4--010723: NA ffdivx-010706: V: 58.397s VO: 8.855s A: 0.000s Sys: 16.803s = 84.054s ffdivx-010711: V: 54.742s VO: 8.676s A: 0.000s Sys: 16.587s = 80.005s ffdivx-010712: V: 46.858s VO: 9.066s A: 0.000s Sys: 16.389s = 72.312s ffdivx-010716: V: 45.024s VO: 8.813s A: 0.000s Sys: 17.095s = 70.932s ffdivx-010718: V: 39.597s VO: 8.782s A: 0.000s Sys: 16.827s = 65.206s ffdivx-010720: V: 39.583s VO: 8.832s A: 0.000s Sys: 16.360s = 64.774s ffdivx-010721: V: 38.917s VO: 8.772s A: 0.000s Sys: 16.688s = 64.376s ffdivx-010724: V: 40.310s VO: 8.840s A: 0.000s Sys: 16.463s = 65.614s Ronin trailer (122s): [DIV3] 640x304 24bpp 25.00 fps 820.6 kbps divx---010720: V: 76.437s VO: 19.920s A: 0.000s Sys: 35.158s = 131.515s divxds-010720: V: 75.681s VO: 20.058s A: 0.000s Sys: 35.098s = 130.836s divx4--010723: NA ffdivx-010706: V: 116.941s VO: 14.743s A: 0.000s Sys: 36.564s = 168.248s ffdivx-010711: V: 108.452s VO: 14.651s A: 0.000s Sys: 36.061s = 159.164s ffdivx-010712: V: 93.509s VO: 14.644s A: 0.000s Sys: 36.192s = 144.344s ffdivx-010716: V: 90.271s VO: 14.666s A: 0.000s Sys: 36.401s = 141.337s ffdivx-010718: V: 77.054s VO: 14.625s A: 0.000s Sys: 36.337s = 128.016s ffdivx-010720: V: 77.930s VO: 14.564s A: 0.000s Sys: 35.980s = 128.473s ffdivx-010721: V: 77.311s VO: 14.713s A: 0.000s Sys: 35.946s = 127.971s ffdivx-010724: V: 79.369s VO: 14.606s A: 0.000s Sys: 35.541s = 129.516s Hannibal trailer (139s): [DIV3] 480x260 24bpp 24.00 fps 185.7 kbps divx---010720: V: 34.902s VO: 13.047s A: 0.000s Sys: 23.557s = 71.506s divxds-010720: V: 35.669s VO: 13.451s A: 0.000s Sys: 24.632s = 73.752s divx4--010723: NA ffdivx-010706: V: 70.192s VO: 13.309s A: 0.000s Sys: 24.315s = 107.816s ffdivx-010711: V: 66.790s VO: 13.295s A: 0.000s Sys: 24.121s = 104.205s ffdivx-010712: V: 47.430s VO: 13.350s A: 0.000s Sys: 23.983s = 84.763s ffdivx-010716: V: 44.439s VO: 13.434s A: 0.000s Sys: 24.167s = 82.041s ffdivx-010718: V: 41.497s VO: 13.329s A: 0.000s Sys: 24.083s = 78.909s ffdivx-010720: V: 38.311s VO: 13.387s A: 0.000s Sys: 23.845s = 75.543s ffdivx-010721: V: 38.055s VO: 13.345s A: 0.000s Sys: 23.882s = 75.283s ffdivx-010724: V: 39.615s VO: 13.283s A: 0.000s Sys: 23.924s = 76.821s Star Wars 1 trailer (147s): [DIV3] 640x288 24bpp 24.00 fps 995.3 kbps divx---010720: V: 82.784s VO: 21.985s A: 0.000s Sys: 38.765s = 143.534s divxds-010720: V: 82.977s VO: 22.021s A: 0.000s Sys: 38.686s = 143.684s divx4--010723: NA ffdivx-010712: V: 102.480s VO: 15.861s A: 0.000s Sys: 39.604s = 157.945s ffdivx-010716: V: 97.965s VO: 15.720s A: 0.000s Sys: 39.653s = 153.338s ffdivx-010718: V: 92.271s VO: 15.800s A: 0.000s Sys: 40.417s = 148.489s ffdivx-010720: V: 86.773s VO: 15.997s A: 0.000s Sys: 39.656s = 142.426s ffdivx-010721: V: 85.891s VO: 16.024s A: 0.000s Sys: 39.751s = 141.665s ffdivx-010724: V: 88.884s VO: 15.941s A: 0.000s Sys: 42.479s = 147.304s Highlander 4 trailer (97s): [DIV3] 520x310 24bpp 24.00 fps 892.7 kbps divx---010720: V: 54.347s VO: 11.776s A: 0.000s Sys: 21.669s = 87.792s divxds-010720: V: 54.506s VO: 12.052s A: 0.000s Sys: 21.917s = 88.474s divx4--010723: NA ffdivx-010720: V: 54.758s VO: 9.386s A: 0.000s Sys: 22.099s = 86.243s ffdivx-010721: V: 54.293s VO: 9.478s A: 0.000s Sys: 22.019s = 85.790s ffdivx-010724: V: 55.379s VO: 9.302s A: 0.000s Sys: 21.862s = 86.542s -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Tue Jul 24 11:49:10 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Tue, 24 Jul 2001 11:49:10 +0200 Subject: [Mplayer-users] mpeg not playbackable (sound) References: <200107232216.AAA35302@thot.banki.hu> <20010724113922.A44801@hoth.amu.edu.pl> Message-ID: <001101c11425$e736fa90$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* hi ... i've uploaded the file "accident.mpg", mplayer detects a mpeg2/3 layer sound, but cannot play it. the video is played normaly... it's a funny video ;-) mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Tue Jul 24 12:06:54 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Tue, 24 Jul 2001 12:06:54 +0200 (MET DST) Subject: [Mplayer-users] mpeg not playbackable (sound) Message-ID: <200107241006.f6OA6sB27882@pheidippides.md.chalmers.se> >i've uploaded the file "accident.mpg", mplayer detects a mpeg2/3 layer >sound, but cannot play it. the video is played normaly... > >it's a funny video ;-) I looked at it. It's nicely done, but what exactly is funny about it? gruel P.S. If you demux it, you'll find that audio is not Layer III but Layer I: Playing MPEG stream from chunk-0.mp1 ... MPEG 1.0 layer I, 192 kbit/s, 44100 Hz stereo -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Tue Jul 24 12:10:04 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Tue, 24 Jul 2001 12:10:04 +0200 (MET DST) Subject: [Mplayer-users] seperate audio file Message-ID: <200107241010.f6OAA5B28022@pheidippides.md.chalmers.se> Hi, I asked for it yesterday, but I did not insist on an answer, so: Would it be possible to make mplayer use a different audio file than present in the video? Say, you call it with TWO filenames (one video, one audio) instead of one, then it played video from the video file and audio from the audio file? Or is this too complicate for syncronization? gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se | Tel. +46 31 772 5323 (office) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 24 12:30:53 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 24 Jul 2001 12:30:53 +0200 (CEST) Subject: [Mplayer-users] cyrillic fonts In-Reply-To: Message-ID: <200107241030.MAA18114@thot.banki.hu> Hi, > On Mon, 23 Jul 2001, Arpi wrote: > > > It's because new OSD code requires chars to be 8-pixel aligned (horizontal > > position). Btw distance between chars is configurable with both char > > generators. > > can you tell me what exactly will be the requirements, so i can make the gimp > plugin compatible with them? the only restriction is that characters must be started at x position dividable by 8. so if char ends at 21, the next char can't be at 22, it must be at 24. the padding pixels should be black (transparent). (the new MMX osd renderer processes 8 pixels in one step) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 24 12:42:47 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 24 Jul 2001 12:42:47 +0200 (CEST) Subject: [Mplayer-users] seperate audio file In-Reply-To: <200107241010.f6OAA5B28022@pheidippides.md.chalmers.se> Message-ID: <200107241042.MAA34736@thot.banki.hu> Hi, > Hi, > I asked for it yesterday, but I did not insist on an answer, so: > > Would it be possible to make mplayer use a different audio file than > present in the video? Say, you call it with TWO filenames (one video, one audio) > instead of one, then it played video from the video file and audio from the > audio file? > > Or is this too complicate for syncronization? as i said many times, it will be possible _AFTER_ libdemuxer is finished. i'm working on that, but nowdays i'm VERY VERY busy with my commercial work :(((( A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 24 12:50:10 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 24 Jul 2001 12:50:10 +0200 (CEST) Subject: [Mplayer-users] mpeg not playbackable (sound) In-Reply-To: <200107241006.f6OA6sB27882@pheidippides.md.chalmers.se> Message-ID: <200107241050.MAA34144@thot.banki.hu> Hi, > > >i've uploaded the file "accident.mpg", mplayer detects a mpeg2/3 layer > >sound, but cannot play it. the video is played normaly... > > > >it's a funny video ;-) > > I looked at it. It's nicely done, but what exactly is funny about it? > > gruel > > P.S. If you demux it, you'll find that audio is not Layer III but Layer I: > > Playing MPEG stream from chunk-0.mp1 ... > MPEG 1.0 layer I, 192 kbit/s, 44100 Hz stereo hmm. layer I isn't supported by mp3lib. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Tue Jul 24 12:53:45 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Tue, 24 Jul 2001 12:53:45 +0200 (MET DST) Subject: [Mplayer-users] seperate audio file Message-ID: <200107241053.f6OArjB29514@pheidippides.md.chalmers.se> >Hi, > >> Hi, >> I asked for it yesterday, but I did not insist on an answer, so: >> >> Would it be possible to make mplayer use a different audio file than >> present in the video? Say, you call it with TWO filenames (one video, one audio) >> instead of one, then it played video from the video file and audio from the >> audio file? >> >> Or is this too complicate for syncronization? > >as i said many times, it will be possible _AFTER_ libdemuxer is finished. >i'm working on that, but nowdays i'm VERY VERY busy with my commercial >work :(((( Hi, SORRY... you gave this answer more than once, but I don't remember you saying it to this question, too. Anyhow, it was just a question, nobody expects you to start right away, just because someone asks "is it possible to...?" gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Tue Jul 24 13:24:36 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Tue, 24 Jul 2001 14:24:36 +0300 (EEST) Subject: [Mplayer-users] cyrillic fonts In-Reply-To: <200107241030.MAA18114@thot.banki.hu> Message-ID: On Tue, 24 Jul 2001, Arpi wrote: > > can you tell me what exactly will be the requirements, so i can make the gimp > > plugin compatible with them? > > the only restriction is that characters must be started at x position > dividable by 8. > > so if char ends at 21, the next char can't be at 22, it must be at 24. > > the padding pixels should be black (transparent). > > (the new MMX osd renderer processes 8 pixels in one step) good, so the 0.2 version of my plugin should do fine :) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Tue Jul 24 14:56:05 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Tue, 24 Jul 2001 14:56:05 +0200 Subject: [Mplayer-users] Problems using mp.pl Message-ID: <20010724145605.A13482@telia.com> When using mp.pl with my Almost Famous movie (which is split in two parts) strange things happen after mplayer jumps to the second file: DEMUXER: Too many (1652 in 8389868 bytes) video packets in the buffer! (maybe you play a non-interleaved stream/file or video codec failed) Note that this does NOT happen if I start the second file manually. The command I used to play these files was: TOOLS/mp.pl -ss 01:18:00 /home/andre/incoming/almost.famous.cd1.dvdrip.divx-dominion.avi /home/andre/incoming/almost.famous.cd2.dvdrip.divx-dominion.avi 01:18:00 is like 10 seconds before the first file is finished. Any clues? -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From iive at abv.bg Tue Jul 24 18:18:05 2001 From: iive at abv.bg (Ivan Kalachev) Date: Tue, 24 Jul 2001 18:18:05 +0200 Subject: [Mplayer-users] Backup Web Site Message-ID: <20010724151805.13854.qmail@abv.bg> I cannot access http://thot.banki.hu/esp-team/MPlayer.html It redirects me to http://mplayer.sourceforge.net/homepage/ where with bold is writen "You've reached our backup server, sorry for any inconvenience", and last message is from 2001.06.19. I got Mplayer18pre4 and now i cannot find it:( Maybe my ISP is bad, but would you update and backup web site. Thanks ----------------------------------- ??????? ????????? toolbar ?????: http://gbg.bg/toolbar/ _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Tue Jul 24 21:14:27 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Tue, 24 Jul 2001 19:14:27 +0000 (:) Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <200107232216.AAA35302@thot.banki.hu> Message-ID: Hi, Arpi! On 2001-07-24 00:16:36 you wrote: >Hi, > >Gerard Lantau just merged & fixed some things of libavcodec >in ffmpeg's CVS to get it working well wiht MPlayer. >I didn't updated (or removed) old version in MPlayer tree, because >it may contains some optimization not yet merged into ffmpeg tree. >(I hope that Nick will do it soon) > Not soon. I have a lot of problems with my new hardware aka ATI Radeon VE ;) I didn't know that Radeon != Radeon VE from driver point. Simply it doesn't work under Linux and I have no graphics for now (Btw under WinNT - all o'k). But I hate aalib ;) Currently I will try to setup XFree86-Suse where was declared support of my card. So when I'll get working X11 then I'll continue participation with mplayer. Best regards! Nick (2001-07-24 19:07:40) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Tue Jul 24 17:28:24 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Tue, 24 Jul 2001 17:28:24 +0200 (MET DST) Subject: ATI Radeon VE (was: Re: [Mplayer-users] new ffmpeg/libavcodec ) Message-ID: <200107241528.f6OFSOB09729@pheidippides.md.chalmers.se> Hi Nick, >Not soon. I have a lot of problems with my new hardware aka ATI Radeon VE ;) >I didn't know that Radeon != Radeon VE from driver point. >Simply it doesn't work under Linux and I have no graphics for now (Btw under WinNT - all o'k). :-) Hey, I could have told you! I had been asking about Radeon VE a few times, but now I finally meet someone who has it. Good for me ;-) Try the lastest XFree 4.1, or even CVS. In the log-file, there was a remark that a bug about Radeon VE giving no picture was fixed now. I have not seen any official "support" for it, but on the other hand, they always write "Radeon supported" and ignore the VE. Apart from this, atyfb (fbdev) should work, too, so you could set up a X-Server on top of this. gruel P.S. if you have time, please keep me informed about what you achived with Radeon VE, I guess I'll buy one myself not too far from now. I would be glad to have less trouble than you. -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Tue Jul 24 18:09:33 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Tue, 24 Jul 2001 18:09:33 +0200 Subject: [Mplayer-users] Backup Web Site In-Reply-To: <20010724151805.13854.qmail@abv.bg>; from iive@abv.bg on Tue, Jul 24, 2001 at 06:18:05PM +0200 References: <20010724151805.13854.qmail@abv.bg> Message-ID: <20010724180933.A29729@woodstock.localdomain> It's the Question that drives us, Ivan Kalachev : > I cannot access http://thot.banki.hu/esp-team/MPlayer.html Our main site is http://mplayerhq.hu -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From nickols_k at mail.ru Tue Jul 24 22:25:44 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Tue, 24 Jul 2001 20:25:44 +0000 (:) Subject: ATI Radeon VE (was: Re: [Mplayer-users] new ffmpeg/libavcodec ) In-Reply-To: <200107241528.f6OFSOB09729@pheidippides.md.chalmers.se> Message-ID: <200107241624.f6OGOiD25687@post.hq.telecet.com> Hi, Christoph Lampert! On 2001-07-24 17:28:24 you wrote: >Try the lastest XFree 4.1, or even CVS. In the log-file, there was a remark >that a bug about Radeon VE giving no picture was fixed now. I have not seen >any official "support" for it, but on the other hand, they always write "Radeon >supported" and ignore the VE. > I have X-4.1.0 but it makes something like "power off" on my screen after startx. (Means liitle indicator of monitor is blinked) >Apart from this, atyfb (fbdev) should work, too, so you could set up >a X-Server on top of this. X-developers didn't updated X-documentation since 4.0.2 and I'm don't know any options of radeon_drv.o. But I have found (on xfree86.org pages) that only SuSE does support Radeon VE. Then I've found on suse's ftp at: ftp://ftp.suse.com/pub/suse/i386/X/XFree86/XFree86-4.1.0-SuSE/ NEWS at 18 jul (i.e. 6 days ago) *********************** NEWS for Release 4.1.0-10 ****************************** - Support for Radeon VE (1002:5159) on SVGA Port ... ========================================================== And today I download (already half of day from top slower FTP of SuSE) this package. >P.S. if you have time, please keep me informed about what you achived >with Radeon VE, I guess I'll buy one myself not too far from now. >I would be glad to have less trouble than you. I prefer not to be a pioneer ;) Well - I my story will have a good end - maybe I'll write a book in mlpayer/DOCS about ;) Best regards! Nick (2001-07-24 20:14:15) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Tue Jul 24 18:46:10 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Tue, 24 Jul 2001 18:46:10 +0200 Subject: [Mplayer-users] MTRR settings for TNT2, use auto-added values? Message-ID: <20010724184610.A15184@telia.com> Hi folks, I've been told the binary drivers from NVidia should automatically set up correct MTRR settings for me, is this correct? The /proc/mtrr settings that have been automatically configured for my 32 meg TNT2 card are: reg00: base=0x00000000 ( 0MB), size= 128MB: write-back, count=1 reg01: base=0xe0000000 (3584MB), size= 64MB: write-combining, count=1 reg02: base=0xe6000000 (3680MB), size= 32MB: write-combining, count=1 This differs a bit from the MTRR instructions as shipped with mplayer. For an example, the reg0{0,1,2}: part isn't in those instructions. Also, the memory size is specified in MB for me while the docs says they should be in hex. Should I keep it the way it was automatically configured or should I modify it? I'm loosing frames on high-res DivX movies with my PIII 550 and I'm trying to find a way to fix it without buying a new processor. lspci -v shows: Memory at e4000000 (32-bit, non-prefetchable) [size=16M] Memory at e6000000 (32-bit, prefetchable) [size=32M] Is only the second one relevant when specifying MTRR? -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Tue Jul 24 18:44:27 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Tue, 24 Jul 2001 18:44:27 +0200 Subject: ATI Radeon VE (was: Re: [Mplayer-users] new ffmpeg/libavcodec ) In-Reply-To: <200107241624.f6OGOiD25687@post.hq.telecet.com> References: <200107241624.f6OGOiD25687@post.hq.telecet.com> Message-ID: <200107241644.f6OGiSo24063@alison.hemmet.chalmers.se> Am Dienstag, 24. Juli 2001 22:25 schrieben Sie: > Hi, Christoph Lampert! > > On 2001-07-24 17:28:24 you wrote: > >Try the lastest XFree 4.1, or even CVS. In the log-file, there was a > > remark that a bug about Radeon VE giving no picture was fixed now. I have > > not seen any official "support" for it, but on the other hand, they > > always write "Radeon supported" and ignore the VE. > > I have X-4.1.0 but it makes something like "power off" on my screen after > startx. (Means liitle indicator of monitor is blinked) > > >Apart from this, atyfb (fbdev) should work, too, so you could set up > >a X-Server on top of this. > > X-developers didn't updated X-documentation since 4.0.2 and I'm don't know > any options of radeon_drv.o. I read it in the ChangeLog of XFree-CVS... a bug that switched of graphics port on Radeon VE... > But I have found (on xfree86.org pages) that only SuSE does support > Radeon VE. > Then I've found on suse's ftp at: > ftp://ftp.suse.com/pub/suse/i386/X/XFree86/XFree86-4.1.0-SuSE/ > NEWS at 18 jul (i.e. 6 days ago) > *********************** NEWS for Release 4.1.0-10 > ****************************** > > - Support for Radeon VE (1002:5159) on SVGA Port > ... > ========================================================== > And today I download (already half of day from top slower FTP of SuSE) this > package. Take a faster mirror, there are tons of those. ftp.sunet.se/pub/Linux/distributions/suse is very good for me :-) Many german universities have mirrors on faster connections, too. gruel _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Tue Jul 24 18:57:09 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Tue, 24 Jul 2001 18:57:09 +0200 Subject: [Mplayer-users] MTRR settings for TNT2, use auto-added values? In-Reply-To: <20010724184610.A15184@telia.com> References: <20010724184610.A15184@telia.com> Message-ID: <20010724185709.A15399@telia.com> I tried to change /proc/mtrr but as soon as I did the nvidia driver seams to change it back. I guess that's the way it wants it then... -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Tue Jul 24 23:12:24 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Tue, 24 Jul 2001 21:12:24 +0000 (:) Subject: ATI Radeon VE (was: Re: [Mplayer-users] new ffmpeg/libavcodec ) In-Reply-To: <200107241644.f6OGiSo24063@alison.hemmet.chalmers.se> Message-ID: Hi, Christoph H. Lampert! On 2001-07-24 18:44:27 you wrote: > >Take a faster mirror, there are tons of those. > >ftp.sunet.se/pub/Linux/distributions/suse is very good for me :-) > >Many german universities have mirrors on faster connections, too. > Thanks - I just have downloaded it Best regards! Nick (2001-07-24 21:11:41) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From p_l at tfz.net Tue Jul 24 19:11:32 2001 From: p_l at tfz.net (pl) Date: Tue, 24 Jul 2001 19:11:32 +0200 Subject: [Mplayer-users] ffdivx can't read wallace.avi (DivX) Message-ID: <20010724191132.B3985@gruik.home> Hi! Today's cvs ffmpeg can't read wallace.avi(DivX ;-) whereas divx can. (the video is kinda lsd-powered :) I've uploaded it in incoming together with wallace.txt that explains what was tested. Best regards -- pl _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Tue Jul 24 19:18:14 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Tue, 24 Jul 2001 19:18:14 +0200 Subject: ATI Radeon VE (was: Re: [Mplayer-users] new ffmpeg/libavcodec ) In-Reply-To: References: Message-ID: <200107241718.f6OHIHo27185@alison.hemmet.chalmers.se> Ni Nick, anyhow, if you don't want the card anymore, I'll take it! It has only to be a little cheaper than in the stores. :-))) gruel _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Tue Jul 24 19:21:52 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Tue, 24 Jul 2001 19:21:52 +0200 Subject: [Mplayer-users] ffdivx can't read wallace.avi (DivX) In-Reply-To: <20010724191132.B3985@gruik.home> References: <20010724191132.B3985@gruik.home> Message-ID: <20010724192152.A92260@hoth.amu.edu.pl> On Tue, Jul 24, 2001 at 07:11:32PM +0200, pl wrote: > Hi! > > Today's cvs ffmpeg can't read wallace.avi(DivX ;-) whereas divx can. > (the video is kinda lsd-powered :) > > I've uploaded it in incoming together with wallace.txt that explains > what was tested. try compile cvs.mplayer with cvs.ffmpeg (and also try broken1*.avi from incoming) best regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 24 19:26:50 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 24 Jul 2001 19:26:50 +0200 (CEST) Subject: [Mplayer-users] Backup Web Site In-Reply-To: <20010724151805.13854.qmail@abv.bg> Message-ID: <200107241726.TAA34576@thot.banki.hu> Hi, > I cannot access http://thot.banki.hu/esp-team/MPlayer.html > It redirects me to http://mplayer.sourceforge.net/homepage/ > where with bold is writen "You've reached our backup > server, sorry for any inconvenience", and last message is > from 2001.06.19. I got Mplayer18pre4 and now i cannot find > it:( > Maybe my ISP is bad, but would you update and backup web > site. http://www.mplayerhq.hu (or http://mplayer.dev.hu) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 24 19:29:02 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 24 Jul 2001 19:29:02 +0200 (CEST) Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: Message-ID: <200107241729.TAA34660@thot.banki.hu> Hi, > Not soon. I have a lot of problems with my new hardware aka ATI Radeon VE ;) > I didn't know that Radeon != Radeon VE from driver point. > Simply it doesn't work under Linux and I have no graphics for now (Btw under WinNT - all o'k). :(((((((((((((((((( I'm also thinking about buying a Radeon card... (as nvidia sux, and G400 isn't as fast as i want) but i see i must think it twice or more. :( what's the defference between radeon and radeon VE ? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Tue Jul 24 19:45:50 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Tue, 24 Jul 2001 19:45:50 +0200 Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <200107241729.TAA34660@thot.banki.hu> References: <200107241729.TAA34660@thot.banki.hu> Message-ID: <200107241745.f6OHjpX30428@alison.hemmet.chalmers.se> Hi Arpi, > what's the defference between radeon and radeon VE ? ATi Radeon VE is the low-cost chipset with only 1 pixel pipeline instead of 3 (or some other fancy 3D-word). So its 3D performance is worse than of normal Radeon chipset. However, the Radeon VE graphics card (the only card using this chipset) has dual-screen support, DVI out and TV out. For 70$ that should make it the perfect card for non-gamers. Unfortunately there seem to be small differences in drivers, because normal Radeon drivers don't work with Radeon VE. :-( At least not for Linux. :-((( Normal Radeon cards are quite expensive and I think no other card has this combination of dual, TV and DVI, except for the real expensive like All-In-Wonder or so... But support is announced for quite a while now. We (except for Nick) just have to wait a little longer. gruel P.S. What's too slow about G400 ? 3D? _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Tue Jul 24 20:00:28 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Tue, 24 Jul 2001 20:00:28 +0200 Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <200107241729.TAA34660@thot.banki.hu> References: <200107241729.TAA34660@thot.banki.hu> Message-ID: <20010724200028.A16157@telia.com> Arpi wrote: > I'm also thinking about buying a Radeon card... > (as nvidia sux, and G400 isn't as fast as i want) Speaking of video cards, how open source friendly is ATI? Are they at least better than NVidia? -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 24 19:56:37 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 24 Jul 2001 19:56:37 +0200 (CEST) Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <200107241745.f6OHjpX30428@alison.hemmet.chalmers.se> Message-ID: <200107241756.TAA45846@thot.banki.hu> Hi, > > what's the defference between radeon and radeon VE ? > > ATi Radeon VE is the low-cost chipset with only 1 pixel pipeline instead of 3 > (or some other fancy 3D-word). So its 3D performance is worse than of normal then it's similar to Geforce MX vs. Geforce. (or TNT2 M64 vs. TNT2 Pro) > Radeon chipset. However, the Radeon VE graphics card (the only card using > this chipset) has dual-screen support, DVI out and TV out. For 70$ that > should make it the perfect card for non-gamers. yea, it isn't too expensive. similar price as Matrox G450 16MB cards here. > Unfortunately there seem to be small differences in drivers, because normal > Radeon drivers don't work with Radeon VE. :-( At least not for Linux. :-((( If the chip differs (it does...) then changes in driver requires. > Normal Radeon cards are quite expensive and I think no other card has this > combination of dual, TV and DVI, except for the real expensive like > All-In-Wonder or so... But support is announced for quite a while now. We > (except for Nick) just have to wait a little longer. What about 3D support for normal Radeon cards? DOes it work? Stable? is T&L supported? > P.S. What's too slow about G400 ? 3D? yes. Not too slow (I have G400MAX with 5ns SGRAM) but I will need a really kickass fast card with linux support for my next commercial work. (developing 3D engine again...) price doesn't matter in this case. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 24 20:02:16 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 24 Jul 2001 20:02:16 +0200 (CEST) Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <20010724200028.A16157@telia.com> Message-ID: <200107241802.UAA35880@thot.banki.hu> Hi, > Arpi wrote: > > > I'm also thinking about buying a Radeon card... > > (as nvidia sux, and G400 isn't as fast as i want) > > Speaking of video cards, how open source friendly is ATI? Are they at least > better than NVidia? Afaik ATI itself doesn't develop drivers. They gave docs to DRI guys, and paid for the driver developemnt. Drivers are 100% opensource. (same for matrox, but TV-out and dualhead support for G400 requires a binary-only lib called libHAL, because they used foregin technologies for dualhead, which can't be opened :( 3dfx is even better, they already made their famous Glide opensource too.) Personally I hate nvidia. Not only for binary-only drivers, but their very bad support. They made something called drivers, and they are proud to support linux... but really it is buggy unstable shit. And they doesn't seem to want fix bugs and problems. For example the famous green/purple lines at bottom of Xv window... still not fixed, while it's known (and reported) bug for 3 months. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Tue Jul 24 20:22:18 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Tue, 24 Jul 2001 20:22:18 +0200 Subject: ATI Radeon VE (was: Re: [Mplayer-users] new ffmpeg/libavcodec ) In-Reply-To: References: Message-ID: <200107241822.f6OIMJt02783@alison.hemmet.chalmers.se> Hi Nick, > Thanks - I just have downloaded it Forgot to ask, did you try connecting the screen the second video port? Some people at dri-users told, this used to be the only way getting it to work. gruel _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Wed Jul 25 00:37:17 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Tue, 24 Jul 2001 22:37:17 +0000 (:) Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <200107241745.f6OHjpX30428@alison.hemmet.chalmers.se> Message-ID: Hi, Christoph H. Lampert! On 2001-07-24 19:45:50 you wrote: >Hi Arpi, > >> what's the defference between radeon and radeon VE ? > >ATi Radeon VE is the low-cost chipset with only 1 pixel pipeline instead of 3 >(or some other fancy 3D-word). So its 3D performance is worse than of normal >Radeon chipset. However, the Radeon VE graphics card (the only card using >this chipset) has dual-screen support, DVI out and TV out. For 70$ that >should make it the perfect card for non-gamers. > Main difference between Radeon and VE from my point is video bandwidth - a full radeon has 128-bit DDR access but VE has only 64-bit DDR access (Refer for detail to www.anadtech.com). Today ATI is only company which produses such cards (in <200$ price range). But I hope that 183MHz of video memory will be enough for movie (At least ATI 3D charger with 4mb played me movies in real time (btw not under winnt)). >Unfortunately there seem to be small differences in drivers, because normal >Radeon drivers don't work with Radeon VE. :-( At least not for Linux. :-((( > >Normal Radeon cards are quite expensive and I think no other card has this >combination of dual, TV and DVI, except for the real expensive like >All-In-Wonder or so... But support is announced for quite a while now. We >(except for Nick) just have to wait a little longer. > I don't know what reason for me from DVI but I've purchase this card for S-Video out. >P.S. What's too slow about G400 ? 3D? Matrox G400 is bit faster of its successor G450 ;) It is reason - why I did not purchase it. I don't know about G550 but Matrox places its card as far from gamer - as possible. At least radeon VE is much faster of G550 from game point Best regards! Nick (2001-07-24 22:30:09) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Wed Jul 25 00:40:55 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Tue, 24 Jul 2001 22:40:55 +0000 (:) Subject: ATI Radeon VE (was: Re: [Mplayer-users] new ffmpeg/libavcodec ) In-Reply-To: <200107241822.f6OIMJt02783@alison.hemmet.chalmers.se> Message-ID: Hi, Christoph H. Lampert! On 2001-07-24 20:22:18 you wrote: > >> Thanks - I just have downloaded it > >Forgot to ask, did you try connecting the screen the second video port? >Some people at dri-users told, this used to be the only way getting it to >work. Howto? Best regards! Nick (2001-07-24 22:40:42) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Wed Jul 25 00:40:02 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Tue, 24 Jul 2001 22:40:02 +0000 (:) Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <20010724200028.A16157@telia.com> Message-ID: Hi, Andr Dahlqvist! On 2001-07-24 20:00:28 you wrote: >Arpi wrote: > >> I'm also thinking about buying a Radeon card... >> (as nvidia sux, and G400 isn't as fast as i want) > >Speaking of video cards, how open source friendly is ATI? Are they at least >better than NVidia? Of course, ATI radeon VE is slower of NVidia2 GTS+ but price ;) In addition: NVidia has very unstable drivers for linux (I know it from my friends) but native linux drivers are very slower. (By rumours - NVidia guys are from SiliconGraphics - but their hardware it too closed) Best regards! Nick (2001-07-24 22:37:40) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Wed Jul 25 00:29:34 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Tue, 24 Jul 2001 22:29:34 +0000 (:) Subject: ATI Radeon VE (was: Re: [Mplayer-users] new ffmpeg/libavcodec ) In-Reply-To: <200107241718.f6OHIHo27185@alison.hemmet.chalmers.se> Message-ID: Hi, Christoph H. Lampert! On 2001-07-24 19:18:14 you wrote: >Ni Nick, > >anyhow, if you don't want the card anymore, I'll take it! >It has only to be a little cheaper than in the stores. :-))) > Don't be quick! I have a 2 weeks money back period ;) Best regards! Nick (2001-07-24 22:28:52) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 24 20:37:52 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 24 Jul 2001 20:37:52 +0200 (CEST) Subject: [Mplayer-users] Problems using mp.pl In-Reply-To: <20010724145605.A13482@telia.com> Message-ID: <200107241837.UAA37846@thot.banki.hu> Hi, > When using mp.pl with my Almost Famous movie (which is split in two parts) > strange things happen after mplayer jumps to the second file: > > DEMUXER: Too many (1652 in 8389868 bytes) video packets in the buffer! > (maybe you play a non-interleaved stream/file or video codec failed) > > Note that this does NOT happen if I start the second file manually. The > command I used to play these files was: > > TOOLS/mp.pl -ss 01:18:00 /home/andre/incoming/almost.famous.cd1.dvdrip.divx-dominion.avi /home/andre/incoming/almost.famous.cd2.dvdrip.divx-domini > on.avi > > 01:18:00 is like 10 seconds before the first file is finished. > > Any clues? I think that you have a buggy audio driver... it doesn't stop playing at close() (end of file1), and so buffer is full when file2 is started. this can confuse player... try with option -ni (it forces independent streaming of audio & video, may help for you, but it's an ugly workaround...) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 24 20:50:51 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 24 Jul 2001 20:50:51 +0200 (CEST) Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: Message-ID: <200107241850.UAA34718@thot.banki.hu> Hi, > >ATi Radeon VE is the low-cost chipset with only 1 pixel pipeline instead of 3 > >(or some other fancy 3D-word). So its 3D performance is worse than of normal > >Radeon chipset. However, the Radeon VE graphics card (the only card using > >this chipset) has dual-screen support, DVI out and TV out. For 70$ that > >should make it the perfect card for non-gamers. > > > Main difference between Radeon and VE from my point is video bandwidth - > a full radeon has 128-bit DDR access but VE has only 64-bit DDR access > (Refer for detail to www.anadtech.com). Today ATI is only company which Hey, I should create mplayer-ati list too, similar to mplayer-matrox :) > produses such cards (in <200$ price range). But I hope that 183MHz of video > memory will be enough for movie (At least ATI 3D charger with 4mb played > me movies in real time (btw not under winnt)). Yes, they rocks. I have Ati Xpert98 at work, and it's kickass fast with Xv. And is a very cheap card, about 20$ calced back from local prices. It's even "good" in 3D too, gives 600fps in Gears, and plays our 3D stuffs as fast under linux as TNT1 does under windoze. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Tue Jul 24 21:05:35 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Tue, 24 Jul 2001 21:05:35 +0200 Subject: [Mplayer-users] Problems using mp.pl In-Reply-To: <200107241837.UAA37846@thot.banki.hu> References: <200107241837.UAA37846@thot.banki.hu> Message-ID: <20010724210535.A16751@telia.com> Arpi wrote: > I think that you have a buggy audio driver... I have a Soundblaster AWE32 card, and I use the OSS driver as shipped with 2.4.7. I guess I need to find the right kernel hacker to report this too, I wonder who since Alan Cox isn't the sound guy any more. Also, in what way should I claim that it is buggy? > try with option -ni Unfortunately that didn't help work around it. -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Wed Jul 25 01:25:00 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Tue, 24 Jul 2001 23:25:00 +0000 (:) Subject: [Mplayer-users] Video roundup Message-ID: Hello! If who interested with subj - below are links (which I've found): http://www.anandtech.com/showdoc.html?i=1332 http://www.anandtech.com/video/showdoc.html?i=1334&p=2 http://www.anandtech.com/showdoc.html?i=1421&p=3 http://www6.tomshardware.com/graphic/01q1/010316/atiradeon-01.html Best regards! Nick _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Tue Jul 24 21:31:21 2001 From: kinali at gmx.net (Attila Kinali) Date: Tue, 24 Jul 2001 21:31:21 +0200 Subject: [Mplayer-users] strange percentage numbers Message-ID: Hi, I get some strange procentage numbers on my laptop playing different files: A: 1.3 ( 0.6) V: 0.7 A-V: 0.064 ct: 0.022 13 3303847% 0% 1651923.2% 0 It is machine _and_ file related. I could not yes find out on which files it depends, because it happens with divx and mpeg2 files too. But only on my laptop, not on my desktop (which is a PII). I run the mplayer cvs version from this morning on a PIII with kernel 2.2.19 (SSE disabled). Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. ---mplayer output--- MPlayer 0.17cvs-010724-13:24(C) 2000-2001 Arpad Gereoffy CommandLine: '-vo' 'sdl' '30sekdt01.mpeg' '-v' Reading /home/attila/.mplayer/codecs.conf: 15 audio & 33 video codecs Font /home/attila/.mplayer/font/font.desc loaded successfully! (140 chars) ASF_check: not ASF guid! system stream synced at 0xB (11)! ==> Found video stream: 0 Detected MPEG-PS file format! ==> Found audio stream: 0 Searching for sequence header... OK! mpeg2dec-0.2.0-release (C) 2000-2001 Aaron Holtzman & Michel Lespinasse libmpeg2: Using MMX for IDCT transform libmpeg2: Using MMX for motion compensation mpeg bitrate: 2048 (800) VIDEO: MPEG1 352x288 (aspect 8) 25.00 fps 1024.0 kbps (128.0 kbyte/s) [V] filefmt:2 fourcc:0x10000001 size:352x288 fps:25.00 ftime:=0.0400 Detected audio codec: [mp3] drv:1 (MPEG layer-2, layer-3) Initializing audio codec... dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer mp3lib: Processor ID: 686 mp3lib: Using Pentium-MMX optimized decore. AUDIO: srate=44100 chans=2 bps=2 sfmt=0x10 ratio: 24000->176400 Detected video codec: [mpeg12] drv:1 (MPEG 1 or 2) vo_debug: query(Planar YV12) returned 0x6 vo_debug1: out_fmt=Planar YV12 VO: [sdl] 352x288 => 352x288 Planar YV12 VO: Description: SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!) VO: Author: Ryan C. Gordon , Felix Buenemann video_out->init(352x288->352x288,flags=0,'MPlayer',0x32315659) SDL: Using 0x32315659 (YV12) image format SDL: deactivating XScreensaver/DPMS SDL: X11 Resolution 1024x768 SDL: Using driver: x11 SDL: using hardware-surface SDL Aspect-Destinationres: 322x264 (x: 15, y: 0) SDL: setting windowed mode INFO: Video OUT driver init OK! AO: [oss] 44100Hz Stereo Signed 16-bit (Little-Endian) AO: Description: OSS/ioctl audio output AO: Author: A'rpi ao2: 44100 Hz 2 chans Signed 16-bit (Little-Endian) audio_setup: using '/dev/dsp' dsp device audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian)) audio_setup: using 44100 Hz samplerate (requested: 44100) audio_setup: frags: 64/64 (2048 bytes/frag) free: 131072 Start playing... A: 1.3 ( 0.6) V: 0.7 A-V: 0.064 ct: 0.022 13 3303847% 0% 1651923.2% 0 ---mplayer output--- ---system data--- attila at kibako:~$ uname -a Linux kibako 2.2.19 #1 Sat Apr 28 23:08:24 CEST 2001 i686 unknown attila at kibako:~$ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 6 cpu MHz : 697.426 cache size : 256 KB fdiv_bug : no hlt_bug : no sep_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr xmm bogomips : 1392.64 ---system data--- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 24 22:18:41 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 24 Jul 2001 22:18:41 +0200 (CEST) Subject: [Mplayer-users] strange percentage numbers In-Reply-To: Message-ID: <200107242018.WAA21236@thot.banki.hu> Hi, > I get some strange procentage numbers on my laptop playing > different files: > > A: 1.3 ( 0.6) V: 0.7 A-V: 0.064 ct: 0.022 13 3303847% 0% 1651923.2% 0 > > It is machine _and_ file related. I could not yes find > out on which files it depends, because > it happens with divx and mpeg2 files too. > But only on my laptop, not on my desktop (which is a PII). > > I run the mplayer cvs version from this morning on a > PIII with kernel 2.2.19 (SSE disabled). I think that win32 codecs uses SSE, doesn't matter if you disable it in mplayer (they use built-in cpu detection code). And sse corrupts FPU registers, this way float percentage numbers are badly calculated. Can you try different codecs (line vfw,dshow,ffmpeg,divx4 etc) for same file? Does codec matter? Does video mode (x11,xv,null,etc) matter? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From p_l at tfz.net Tue Jul 24 22:30:52 2001 From: p_l at tfz.net (pl) Date: Tue, 24 Jul 2001 22:30:52 +0200 Subject: [Mplayer-users] ffdivx can't read wallace.avi (DivX) In-Reply-To: <20010724192152.A92260@hoth.amu.edu.pl> References: <20010724191132.B3985@gruik.home> <20010724192152.A92260@hoth.amu.edu.pl> Message-ID: <20010724223052.A5477@gruik.home> On Tue, Jul 24, 2001 at 07:21:52PM +0200, Bohdan Horst wrote: [...] > > Today's cvs ffmpeg can't read wallace.avi(DivX ;-) whereas divx can. > > (the video is kinda lsd-powered :) [...] > try compile cvs.mplayer with cvs.ffmpeg (and also try broken1*.avi from > incoming) [...] Well it works :) Regards. -- pl _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From leitner at convergence.de Wed Jul 25 00:23:33 2001 From: leitner at convergence.de (Felix von Leitner) Date: Wed, 25 Jul 2001 00:23:33 +0200 Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <200107241729.TAA34660@thot.banki.hu> Message-ID: <20010725002333.B22906@convergence.de> Thus spake Arpi (arpi at thot.banki.hu): > (as nvidia sux, and G400 isn't as fast as i want) Actually, what's your problem with nvidia? The hardware rules, you just don't get the specs :-( The Linux framebuffer is much more stable than the Matrox one, which until then was the only fbcon worth talking about. Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Wed Jul 25 03:54:26 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Wed, 25 Jul 2001 03:54:26 +0200 Subject: [Mplayer-users] "Taxi Driver.avi" works with windows .dll's but not with odivx or divx4 Message-ID: <20010725035426.A23381@telia.com> I just uploaded 5 mb of "Taxi Driver.avi" and taxi_driver.txt. This file plays as expected with the windows .dll's but only produces a black/green window when using odivx/divx4. Otherwise Divx4Linux seams very cool, although ffmpeg is cooler since it's open source:-) -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Wed Jul 25 04:06:49 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Wed, 25 Jul 2001 04:06:49 +0200 Subject: [Mplayer-users] "Taxi Driver.avi" works with windows .dll's but not with odivx or divx4 In-Reply-To: <20010725035426.A23381@telia.com> References: <20010725035426.A23381@telia.com> Message-ID: <20010725040649.A327@telia.com> I should also add that -vc ffdivx plays this file just fine too. -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atlka at pg.gda.pl Wed Jul 25 08:45:20 2001 From: atlka at pg.gda.pl (Adam Tla/lka) Date: Wed, 25 Jul 2001 08:45:20 +0200 Subject: [Mplayer-users] small changes to MPlayer-20010723 Message-ID: <20010725084520.B8607@sunrise.pg.gda.pl> Hello, I made a patch which implements: * reading subtitles text encoded in utf8 (option -utf8) * reading fonts files from LIBDIR/font if there is no font dir in ~/.mplayer * better detection of local display connection ("unix:" and "localhost:" are assumed local and automagically changed to ":" ) * displaying status only while "verbose" option is on - maybe not all want this but on slower machines we should display only that what is absolutely needed ( film and subtitles in my opinion) Next, what's about an idea of displaying subtitles below the film rectangle. We would see all of the film picture and subtitles wolud be more visible on the black border. Especially in fullscreen mode we have free space on the screen and if we place film window at the top left corner of the screen we could place subtitles just below the film window. Regards -- . . Adam Tla/lka mailto:atlka at pg.gda.pl ^v^ ^v^ ^v^ -------------- next part -------------- diff -ruN MPlayer-20010723/cfg-mplayer.h MPlayer-20010723n/cfg-mplayer.h --- MPlayer-20010723/cfg-mplayer.h Sun Jul 22 11:46:54 2001 +++ MPlayer-20010723n/cfg-mplayer.h Tue Jul 24 08:42:14 2001 @@ -32,6 +32,7 @@ extern int vo_dbpp; extern int osd_level; extern int sub_unicode; +extern int sub_utf8; extern char *ao_outputfilename; extern int ao_pcm_waveheader; @@ -83,6 +84,8 @@ {"noautosub", &sub_auto, CONF_TYPE_FLAG, 0, 1, 0}, {"unicode", &sub_unicode, CONF_TYPE_FLAG, 0, 0, 1}, {"nounicode", &sub_unicode, CONF_TYPE_FLAG, 0, 1, 0}, + {"utf8", &sub_utf8, CONF_TYPE_FLAG, 0, 0, 1}, + {"noutf8", &sub_utf8, CONF_TYPE_FLAG, 0, 1, 0}, {"font", &font_name, CONF_TYPE_STRING, 0, 0, 0}, {"ffactor", &font_factor, CONF_TYPE_FLOAT, CONF_RANGE, 0.0, 10.0}, {"bg", &play_in_bg, CONF_TYPE_FLAG, 0, 0, 1}, diff -ruN MPlayer-20010723/libvo/font_load.c MPlayer-20010723n/libvo/font_load.c --- MPlayer-20010723/libvo/font_load.c Fri Jul 20 04:03:50 2001 +++ MPlayer-20010723n/libvo/font_load.c Tue Jul 24 13:35:44 2001 @@ -2,6 +2,9 @@ #include #include #include +#include +#include +#include #include "config.h" #include "font_load.h" @@ -42,6 +45,7 @@ unsigned char sor2[1024]; font_desc_t *desc; FILE *f; +struct stat fstate; char section[64]; int i,j; int chardb=0; @@ -51,10 +55,15 @@ desc=malloc(sizeof(font_desc_t));if(!desc) return NULL; memset(desc,0,sizeof(font_desc_t)); -desc->fpath=get_path("font/"); - -f=fopen(fname,"rt");if(!f){ printf("font: can't open file: %s\n",fname); return NULL;} +if (!(f = fopen(fname,"rt"))) { + printf("font: can't open file: %s\n",fname); + return NULL; +} +desc->fpath=get_path("font/"); + +if (stat(desc->fpath, &fstate)!=0) desc->fpath=DATADIR"/font" ; + // set up some defaults, and erase table desc->charspace=2; desc->spacewidth=12; diff -ruN MPlayer-20010723/libvo/sub.c MPlayer-20010723n/libvo/sub.c --- MPlayer-20010723/libvo/sub.c Tue Jun 12 16:03:18 2001 +++ MPlayer-20010723n/libvo/sub.c Tue Jul 24 12:03:17 2001 @@ -5,7 +5,8 @@ font_desc_t* vo_font=NULL; unsigned char* vo_osd_text="00:00:00"; -int sub_unicode=0; +int sub_unicode = 0; +int sub_utf8 = 0; static void vo_draw_text_osd(int dxs,int dys,void (*draw_alpha)(int x0,int y0, int w,int h, unsigned char* src, unsigned char *srca, int stride)){ int len=strlen(vo_osd_text); @@ -90,6 +91,28 @@ subtitle* vo_sub=NULL; +static int getcharcode(unsigned char *tptr, int *p) { + int c = tptr[*p] ; + if (c >= 0x80) { + if (sub_unicode) c = (c<<8)+tptr[++(*p)]; else + if (sub_utf8) { + if ((c & 0xe0) == 0xc0) /* 2 bytes U+00080..U+0007FF */ + c = (c & 0x1f)<<6 | + (tptr[++(*p)] & 0x3f); + else if ((c & 0xf0) == 0xe0) /* 3 bytes U+00800..U+00FFFF */ + c = ((c & 0x0f)<<6 | + (tptr[++(*p)] & 0x3f))<<6 | + (tptr[++(*p)] & 0x3f); + else if ((c & 0xf8) == 0xf0) /* 4 bytes U+10000..U+10FFFF */ + c = (((c & 0x07)<<6 | + (tptr[++(*p)] & 0x3f))<<6 | + (tptr[++(*p)] & 0x3f))<<6 | + (tptr[++(*p)] & 0x3f); + } + } + return c; +} + static void vo_draw_text_sub(int dxs,int dys,void (*draw_alpha)(int x0,int y0, int w,int h, unsigned char* src, unsigned char *srca, int stride)){ int i; int y; @@ -106,11 +129,9 @@ int lastxsize=0; for(j=0;j=0x80)) c=(c<<8)+text[++j]; - w = vo_font->width[c]; - if (text[j]==' ' && dxs>xsize) + int c=getcharcode(text, &j); + int w=vo_font->width[c]; + if (c==' ' && dxs>xsize) { lastStripPosition=j; lastxsize=xsize; @@ -140,10 +161,8 @@ int lastxsize=xsize; for(j=0;j=0x80)) c=(c<<8)+text[++j]; - w = vo_font->width[c]; + int c=getcharcode(text, &j); + int w=vo_font->width[c]; if (c==' ' && dxs>xsize) { lastStripPosition=j; @@ -159,10 +178,8 @@ x=dxs/2-xsize/2; for(k=previousStrip;k=0x80)) c=(c<<8)+text[++k]; - font=vo_font->font[c]; + int c=getcharcode(text, &k); + int font=vo_font->font[c]; if(x>=0 && x+vo_font->width[c]=0) draw_alpha(x,y, diff -ruN MPlayer-20010723/libvo/x11_common.c MPlayer-20010723n/libvo/x11_common.c --- MPlayer-20010723/libvo/x11_common.c Thu Jul 19 20:47:22 2001 +++ MPlayer-20010723n/libvo/x11_common.c Tue Jul 24 11:04:21 2001 @@ -91,7 +91,11 @@ } XDestroyImage( mXImage ); // XCloseDisplay( mDisplay ); -#warning Better local display detection method is needed. + /* slightly improved local display detection AST */ + if ( strncmp(mDisplayName, "unix:", 5) == 0) + mDisplayName += 4; + else if ( strncmp(mDisplayName, "localhost:", 10) == 0) + mDisplayName += 9; if (*mDisplayName==':') mLocalDisplay=1; else mLocalDisplay=0; printf("vo: X11 running at %dx%d depth: %d (\"%s\" => %s display)\n",vo_screenwidth,vo_screenheight,vo_depthonscreen,mDisplayName,mLocalDisplay?"local":"remote"); return 1; diff -ruN MPlayer-20010723/mplayer.c MPlayer-20010723n/mplayer.c --- MPlayer-20010723/mplayer.c Sun Jul 22 00:36:39 2001 +++ MPlayer-20010723n/mplayer.c Tue Jul 24 14:40:13 2001 @@ -1350,6 +1350,7 @@ float x=frame_correction; if(delay_corrected){ // printf("A:%6.1f V:%6.1f A-V:%7.3f",a_pts-audio_delay-delay,v_pts,x); + if(verbose) printf("A:%6.1f (%6.1f) V:%6.1f A-V:%7.3f",a_pts,a_pts-audio_delay-delay,v_pts,x); x*=0.1f; if(x<-max_pts_correction) x=-max_pts_correction; else @@ -1359,6 +1360,7 @@ else max_pts_correction=sh_video->frametime*0.10; // +-10% of time sh_audio->timer+=x; c_total+=x; + if(verbose) printf(" ct:%7.3f %3d %2d%% %2d%% %4.1f%% %d\r",c_total, (int)num_frames, (sh_video->timer>0.5)?(int)(100.0*video_time_usage/(double)sh_video->timer):0, @@ -1379,6 +1381,7 @@ float v_pts=d_video->pts; if(frame_corr_num==5){ // printf("A: --- V:%6.1f \r",v_pts); + if(verbose) printf("V:%6.1f %3d %2d%% %2d%% %3.1f%% \r",v_pts, (int)num_frames, (sh_video->timer>0.5)?(int)(100.0*video_time_usage/(double)sh_video->timer):0, @@ -1746,10 +1749,13 @@ current_module=NULL; c_total=0; // kell ez? - printf("A:%6.1f V:%6.1f A-V:%7.3f",d_audio->pts,d_video->pts,0.0f); - printf(" ct:%7.3f \r",c_total);fflush(stdout); + if(verbose) { + printf("A:%6.1f V:%6.1f A-V:%7.3f",d_audio->pts,d_video->pts,0.0f); + printf(" ct:%7.3f \r",c_total);fflush(stdout); + } } else { - printf("A: --- V:%6.1f \r",d_video->pts);fflush(stdout); + if(verbose) + printf("A: --- V:%6.1f \r",d_video->pts);fflush(stdout); } // Set OSD: From andre.dahlqvist at telia.com Wed Jul 25 09:35:13 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Wed, 25 Jul 2001 09:35:13 +0200 Subject: [Mplayer-users] small changes to MPlayer-20010723 In-Reply-To: <20010725084520.B8607@sunrise.pg.gda.pl> References: <20010725084520.B8607@sunrise.pg.gda.pl> Message-ID: <20010725093513.A1229@telia.com> Adam Tla/lka wrote: > * reading subtitles text encoded in utf8 (option -utf8) Should one really have to specify a command line switch for this to work? -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 25 09:49:47 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 25 Jul 2001 09:49:47 +0200 (CEST) Subject: [Mplayer-users] small changes to MPlayer-20010723 In-Reply-To: <20010725093513.A1229@telia.com> Message-ID: <200107250749.JAA44484@thot.banki.hu> Hi, > Adam Tla/lka wrote: > > > * reading subtitles text encoded in utf8 (option -utf8) > > Should one really have to specify a command line switch for this to work? yes, because it uses the high bytes 128-255 of ascii code, which are used by latin codepages in different way. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 25 09:53:27 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 25 Jul 2001 09:53:27 +0200 (CEST) Subject: [Mplayer-users] small changes to MPlayer-20010723 In-Reply-To: <20010725084520.B8607@sunrise.pg.gda.pl> Message-ID: <200107250753.JAA44450@thot.banki.hu> Hi, > I made a patch which implements: > > * reading subtitles text encoded in utf8 (option -utf8) nice. > * reading fonts files from LIBDIR/font if there is no font dir in ~/.mplayer wasn't it done by Vladimir's patch? > * better detection of local display connection ("unix:" and "localhost:" are > assumed local and automagically changed to ":" ) i think there are better methods, because 192.168.1.1:0.0 is local too, if you have an interface with this ip... > * displaying status only while "verbose" option is on - maybe not all want > this but on slower machines we should display only that what is absolutely > needed ( film and subtitles in my opinion) i don't like this one. if you need this, add a new option, for example -quiet and/or simply use verbose==-1 for this checks. do not change verbose==0 level. btw we will rework the whole printf stuff soon, with a much better way. > Next, what's about an idea of displaying subtitles below the film rectangle. > We would see all of the film picture and subtitles wolud be more visible > on the black border. Especially in fullscreen mode we have free space on the > screen and if we place film window at the top left corner of the screen > we could place subtitles just below the film window. Not possible with current libvo. it's will eb done after libvo2 is finished. (maybe never, because nobody working on that nowdays :(((() A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Wed Jul 25 10:08:35 2001 From: kinali at gmx.net (Attila Kinali) Date: Wed, 25 Jul 2001 10:08:35 +0200 Subject: [Mplayer-users] small changes to MPlayer-20010723 In-Reply-To: <20010725084520.B8607@sunrise.pg.gda.pl> References: <20010725084520.B8607@sunrise.pg.gda.pl> Message-ID: On Wed, 25 Jul 2001 08:45:20 +0200 Adam Tla/lka wrote: > Next, what's about an idea of displaying subtitles below the film rectangle. > We would see all of the film picture and subtitles wolud be more visible > on the black border. Especially in fullscreen mode we have free space on the > screen and if we place film window at the top left corner of the screen > we could place subtitles just below the film window. i would suggest different modes: 1) place the picture in the middle, black borders at the top and the bottom 2) place the picture at the top, black border at the bottom Additionally to this an option for positioning the subs But this rises an important question: Do the black borders need to be transfered again and again ? Or can they set once and never again ? Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Wed Jul 25 10:18:10 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Wed, 25 Jul 2001 10:18:10 +0200 (MET DST) Subject: [Mplayer-users] small changes to MPlayer-20010723 Message-ID: <200107250818.f6P8IAB12964@pheidippides.md.chalmers.se> Hi Attila, >But this rises an important question: >Do the black borders need to be transfered again and again ? >Or can they set once and never again ? > > Attila Kinali as far as I know, borders are not transfered at all. That's why it's difficult to just put subtitles there. (Except for some stupid videos that really encoded the black bars on top and bottom). But as A'rpi mentioned, we won't see changes in subtitle overlay/black bars soon, so let's not talk too much about it. He's busy with commercial work ;-p gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jfontain at winealley.com Wed Jul 25 11:04:22 2001 From: jfontain at winealley.com (Jean-Luc Fontaine) Date: Wed, 25 Jul 2001 11:04:22 +0200 Subject: [Mplayer-users] C-Media Electronics Inc CM8338A (cmpci) sound fails since kernel 2.4.6 Message-ID: <3B5E8B96.107@winealley.com> I am baffled. I no longer get sound (just a big hiss) with mplayer (also aviplay) with kernels 2.4.6 and 2.4.7 (used to work with 2.4.5). But I can still play mp3s just fine!!! Has anybody solved that problem? Many thanks in advance... -- Jean-Luc Fontaine _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 25 11:39:16 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 25 Jul 2001 11:39:16 +0200 (CEST) Subject: [Mplayer-users] small changes to MPlayer-20010723 In-Reply-To: <200107250818.f6P8IAB12964@pheidippides.md.chalmers.se> Message-ID: <200107250939.LAA37270@thot.banki.hu> Hi, > >But this rises an important question: > >Do the black borders need to be transfered again and again ? > >Or can they set once and never again ? > > > > Attila Kinali > > as far as I know, borders are not transfered at all. That's why it's difficult > to just put subtitles there. (Except for some stupid videos that really encoded > the black bars on top and bottom). yes, you got it. something should erase that area before new subtitle is displayed... and the thing is more difficult if the half of teh subtitle is over the image, the rest is under the image. For example a 3-line subtitle where the black area is small... and we shouldn't refresh subtitle on black areas at every frame, as we do on the image now. but to support this, some big changes needed in the libvo and subtitle code... > But as A'rpi mentioned, we won't see changes in subtitle overlay/black bars > soon, so let's not talk too much about it. He's busy with commercial work ;-p yes. :( you have to wait until libvo2 is finished (started:)) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From rpbrown at xtra.co.nz Wed Jul 25 12:33:20 2001 From: rpbrown at xtra.co.nz (mdew) Date: Wed, 25 Jul 2001 22:33:20 +1200 Subject: [Mplayer-users] C-Media Electronics Inc CM8338A (cmpci) sound fails since kernel 2.4.6 In-Reply-To: <3B5E8B96.107@winealley.com> References: <3B5E8B96.107@winealley.com> Message-ID: <20010725223320.3a38006c.rpbrown@xtra.co.nz> www.alsa-project.org _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From rpbrown at xtra.co.nz Wed Jul 25 13:00:53 2001 From: rpbrown at xtra.co.nz (mdew) Date: Wed, 25 Jul 2001 23:00:53 +1200 Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <200107232216.AAA35302@thot.banki.hu> References: <200107232216.AAA35302@thot.banki.hu> Message-ID: <20010725230053.53d72b13.rpbrown@xtra.co.nz> On Tue, 24 Jul 2001 00:16:36 +0200 (CEST) Arpi wrote: > Hi, > > Gerard Lantau just merged & fixed some things of libavcodec > in ffmpeg's CVS to get it working well wiht MPlayer. > I didn't updated (or removed) old version in MPlayer tree, because > it may contains some optimization not yet merged into ffmpeg tree. > (I hope that Nick will do it soon) > > Please try the new lib! It plays those problematic fivx files > which are wrong with old libavcodec and projectmayo's divx4linux. > > 1. get latest mplayer from cvs. done.. > 2. get ffmpeg from cvs: > cvs -d:pserver:anonymous at cvs.ffmpeg.sourceforge.net:/cvsroot/ffmpeg login > (press enter for password) > cvs -d:pserver:anonymous at cvs.ffmpeg.sourceforge.net:/cvsroot/ffmpeg co ffmpeg done.. > 3. replace libavcodec dir in mplayer tree with the new one from ffmpeg tree. > warning: symlink is NOT enough! (include ../config.mak will point to > ffmpeg's config.mak instead of mplayer's config.mak if you're using symlink) > so, copy/move libavcodec to mplayer. > 4. compile mplayer: ./configure ; make same.. how do you get the option -vc ...i dont seem to see it in the latest CVS _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Wed Jul 25 13:30:43 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Wed, 25 Jul 2001 13:30:43 +0200 Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <20010725230053.53d72b13.rpbrown@xtra.co.nz> References: <200107232216.AAA35302@thot.banki.hu> <20010725230053.53d72b13.rpbrown@xtra.co.nz> Message-ID: <20010725133043.B29897@hoth.amu.edu.pl> On Wed, Jul 25, 2001 at 11:00:53PM +1200, mdew wrote: > On Tue, 24 Jul 2001 00:16:36 +0200 (CEST) > Arpi wrote: > > > Hi, > > > > Gerard Lantau just merged & fixed some things of libavcodec > > in ffmpeg's CVS to get it working well wiht MPlayer. > > I didn't updated (or removed) old version in MPlayer tree, because > > it may contains some optimization not yet merged into ffmpeg tree. > > (I hope that Nick will do it soon) > > > > Please try the new lib! It plays those problematic fivx files > > which are wrong with old libavcodec and projectmayo's divx4linux. > > > > 1. get latest mplayer from cvs. > > done.. > > > 2. get ffmpeg from cvs: > > cvs -d:pserver:anonymous at cvs.ffmpeg.sourceforge.net:/cvsroot/ffmpeg login > > (press enter for password) > > cvs -d:pserver:anonymous at cvs.ffmpeg.sourceforge.net:/cvsroot/ffmpeg co ffmpeg > > done.. > > > 3. replace libavcodec dir in mplayer tree with the new one from ffmpeg tree. > > warning: symlink is NOT enough! (include ../config.mak will point to > > ffmpeg's config.mak instead of mplayer's config.mak if you're using symlink) > > so, copy/move libavcodec to mplayer. > > 4. compile mplayer: ./configure ; make > > same.. > > how do you get the option -vc ...i dont seem to see it in the latest CVS -vc force usage of a specific video codec, according to its name in codecs.conf, for example : -vc divx use VFW DivX codec -vc divxds use DirectShow DivX codec -vc ffdivx use libavcodec's DivX codec -vc divx4 use ProjectMayo's DivX codec works fine for me :) (except Linux-only divx4) best regards hmm today.ffmpeg.CVS is sloooooooow :( ( about 40% slower than yesterday.ffmpeg.CVS) -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Wed Jul 25 13:53:00 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Wed, 25 Jul 2001 13:53:00 +0200 Subject: [Mplayer-users] mpeg not playbackable (sound) In-Reply-To: <200107241050.MAA34144@thot.banki.hu> References: <200107241050.MAA34144@thot.banki.hu> Message-ID: <4321710908.20010725135300@gmx.de> Hello Arpi, Tuesday, July 24, 2001, 12:50:10 PM, you wrote: > Hi, >> >> >i've uploaded the file "accident.mpg", mplayer detects a mpeg2/3 layer >> >sound, but cannot play it. the video is played normaly... >> > >> >it's a funny video ;-) >> >> I looked at it. It's nicely done, but what exactly is funny about it? >> >> gruel >> >> P.S. If you demux it, you'll find that audio is not Layer III but Layer I: >> >> Playing MPEG stream from chunk-0.mp1 ... >> MPEG 1.0 layer I, 192 kbit/s, 44100 Hz stereo > hmm. layer I isn't supported by mp3lib. it should be in recent mpglib saw on mpg123 changelog that support for it was added: http://www.mpg123.de/mpg123/CHANGES.CVS "- added VBR,Layer1,Layer2 in mpglib" > A'rpi / Astral & ESP-team -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Wed Jul 25 13:54:50 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Wed, 25 Jul 2001 13:54:50 +0200 Subject: [Mplayer-users] Problems using mp.pl In-Reply-To: <20010724145605.A13482@telia.com> References: <20010724145605.A13482@telia.com> Message-ID: <7321820816.20010725135450@gmx.de> Hello Andr?, Tuesday, July 24, 2001, 2:56:05 PM, you wrote: > When using mp.pl with my Almost Famous movie (which is split in two parts) > strange things happen after mplayer jumps to the second file: > DEMUXER: Too many (1652 in 8389868 bytes) video packets in the buffer! > (maybe you play a non-interleaved stream/file or video codec failed) > Note that this does NOT happen if I start the second file manually. The > command I used to play these files was: > TOOLS/mp.pl -ss 01:18:00 /home/andre/incoming/almost.famous.cd1.dvdrip.divx-dominion.avi /home/andre/incoming/almost.famous.cd2.dvdrip.divx-dominion.avi > 01:18:00 is like 10 seconds before the first file is finished. > Any clues? not really it's strange, I'll add some debug code to mp.pl. -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jfontain at winealley.com Wed Jul 25 14:01:41 2001 From: jfontain at winealley.com (Jean-Luc Fontaine) Date: Wed, 25 Jul 2001 14:01:41 +0200 Subject: [Mplayer-users] how do you extract sub-titles from a DVD? Message-ID: <3B5EB525.4000603@winealley.com> I am using the excellent transcode software for conversion to avi, but that functionality is not there yet... -- Jean-Luc Fontaine _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From rpbrown at xtra.co.nz Wed Jul 25 14:03:00 2001 From: rpbrown at xtra.co.nz (mdew) Date: Thu, 26 Jul 2001 00:03:00 +1200 Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <20010725133043.B29897@hoth.amu.edu.pl> References: <200107232216.AAA35302@thot.banki.hu> <20010725230053.53d72b13.rpbrown@xtra.co.nz> <20010725133043.B29897@hoth.amu.edu.pl> Message-ID: <20010726000300.1b7aed88.rpbrown@xtra.co.nz> mdew at storm:~/X_Men/XMen$ mplayer MPlayer 0.17cvs-010725-21:10(C) 2000-2001 Arpad Gereoffy Usage: mplayer [options] [path/]name Options: -vo select video output driver & device (see '-vo help' for list) -ao select audio output driver & device (see '-ao help' for list) -vcd play VCD (video cd) track from device instead of plain file -dvdauth specify DVD device for authentication (for encrypted discs) -ss seek to given (seconds or hh:mm:ss) position -nosound don't play sound -stereo select MPEG1 stereo output (0:stereo 1:left 2:right) -fs -vm -zoom fullscreen playing options (fullscr,vidmode chg,softw.scale) -x -y scale image to * resolution [if -vo driver supports!] -sub specify subtitle file to use (see also -subfps, -subdelay) -vid x -aid y options to select video (x) and audio (y) stream to play -fps x -srate y options to change video (x fps) and audio (y Hz) rate -pp enable postprocessing filter (0-4 for DivX, 0-63 for mpegs) -bps use alternative A-V sync method for AVI files (may help!) -framedrop enable frame-dropping (for slow machines) no -vc i can see....what needs configuring? > > > > > Hi, > > > > > > Gerard Lantau just merged & fixed some things of libavcodec > > > in ffmpeg's CVS to get it working well wiht MPlayer. > > > I didn't updated (or removed) old version in MPlayer tree, because > > > it may contains some optimization not yet merged into ffmpeg tree. > > > (I hope that Nick will do it soon) > > > > > > Please try the new lib! It plays those problematic fivx files > > > which are wrong with old libavcodec and projectmayo's divx4linux. > > > > > > 1. get latest mplayer from cvs. > > > > done.. > > > > > 2. get ffmpeg from cvs: > > > cvs -d:pserver:anonymous at cvs.ffmpeg.sourceforge.net:/cvsroot/ffmpeg login > > > (press enter for password) > > > cvs -d:pserver:anonymous at cvs.ffmpeg.sourceforge.net:/cvsroot/ffmpeg co ffmpeg > > > > done.. > > > > > 3. replace libavcodec dir in mplayer tree with the new one from ffmpeg tree. > > > warning: symlink is NOT enough! (include ../config.mak will point to > > > ffmpeg's config.mak instead of mplayer's config.mak if you're using symlink) > > > so, copy/move libavcodec to mplayer. > > > 4. compile mplayer: ./configure ; make > > > > same.. > > > > how do you get the option -vc ...i dont seem to see it in the latest CVS > > > -vc > force usage of a specific video codec, according to > its name in codecs.conf, for example : > -vc divx use VFW DivX codec > -vc divxds use DirectShow DivX codec > -vc ffdivx use libavcodec's DivX codec > -vc divx4 use ProjectMayo's DivX codec > > > works fine for me :) (except Linux-only divx4) > > > best regards > > hmm today.ffmpeg.CVS is sloooooooow :( ( about 40% slower than > yesterday.ffmpeg.CVS) > > -- > / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ > {---------------------------^----------v----------^------------} > \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Wed Jul 25 14:10:51 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Wed, 25 Jul 2001 14:10:51 +0200 (MET DST) Subject: [Mplayer-users] new ffmpeg/libavcodec Message-ID: <200107251210.f6PCApB20534@pheidippides.md.chalmers.se> Hi, mplayer has many many many many more options than it prints with -h (or even are in the manpage). Not many of them are needed my users, though. -vc might be. gruel >mdew at storm:~/X_Men/XMen$ mplayer > > >MPlayer 0.17cvs-010725-21:10(C) 2000-2001 Arpad Gereoffy > >Usage: mplayer [options] [path/]name > >Options: > -vo select video output driver & device (see '-vo help' for list) > -ao select audio output driver & device (see '-ao help' for list) > -vcd play VCD (video cd) track from device instead of plain file > -dvdauth specify DVD device for authentication (for encrypted discs) > -ss seek to given (seconds or hh:mm:ss) position > -nosound don't play sound > -stereo select MPEG1 stereo output (0:stereo 1:left 2:right) > -fs -vm -zoom fullscreen playing options (fullscr,vidmode chg,softw.scale) > -x -y scale image to * resolution [if -vo driver supports!] > -sub specify subtitle file to use (see also -subfps, -subdelay) > -vid x -aid y options to select video (x) and audio (y) stream to play > -fps x -srate y options to change video (x fps) and audio (y Hz) rate > -pp enable postprocessing filter (0-4 for DivX, 0-63 for mpegs) > -bps use alternative A-V sync method for AVI files (may help!) > -framedrop enable frame-dropping (for slow machines) > >no -vc i can see....what needs configuring? > >> > >> > > Hi, >> > > >> > > Gerard Lantau just merged & fixed some things of libavcodec >> > > in ffmpeg's CVS to get it working well wiht MPlayer. >> > > I didn't updated (or removed) old version in MPlayer tree, because >> > > it may contains some optimization not yet merged into ffmpeg tree. >> > > (I hope that Nick will do it soon) >> > > >> > > Please try the new lib! It plays those problematic fivx files >> > > which are wrong with old libavcodec and projectmayo's divx4linux. >> > > >> > > 1. get latest mplayer from cvs. >> > >> > done.. >> > >> > > 2. get ffmpeg from cvs: >> > > cvs -d:pserver:anonymous at cvs.ffmpeg.sourceforge.net:/cvsroot/ffmpeg login >> > > (press enter for password) >> > > cvs -d:pserver:anonymous at cvs.ffmpeg.sourceforge.net:/cvsroot/ffmpeg co ffmpeg >> > >> > done.. >> > >> > > 3. replace libavcodec dir in mplayer tree with the new one from ffmpeg tree. >> > > warning: symlink is NOT enough! (include ../config.mak will point to >> > > ffmpeg's config.mak instead of mplayer's config.mak if you're using symlink) >> > > so, copy/move libavcodec to mplayer. >> > > 4. compile mplayer: ./configure ; make >> > >> > same.. >> > >> > how do you get the option -vc ...i dont seem to see it in the latest CVS >> >> >> -vc >> force usage of a specific video codec, according to >> its name in codecs.conf, for example : >> -vc divx use VFW DivX codec >> -vc divxds use DirectShow DivX codec >> -vc ffdivx use libavcodec's DivX codec >> -vc divx4 use ProjectMayo's DivX codec >> >> >> works fine for me :) (except Linux-only divx4) >> >> >> best regards >> >> hmm today.ffmpeg.CVS is sloooooooow :( ( about 40% slower than >> yesterday.ffmpeg.CVS) >> >> -- >> / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ >> {---------------------------^----------v----------^------------} >> \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / >> >> _______________________________________________ >> Mplayer-users mailing list >> Mplayer-users at lists.sourceforge.net >> http://lists.sourceforge.net/lists/listinfo/mplayer-users > >_______________________________________________ >Mplayer-users mailing list >Mplayer-users at lists.sourceforge.net >http://lists.sourceforge.net/lists/listinfo/mplayer-users -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Gibraltargatan 86 | CTH, Matematiskt centrum rum 637 | Eklandagatan 86, rum 2235 41279 Gothenburg | 41296 Gothenburg SWEDEN | SWEDEN Email: gruel at gmx.de | Email: lampert at math.chalmers.se | Tel. +46 31 772 5323 (office) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Wed Jul 25 14:17:02 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Wed, 25 Jul 2001 14:17:02 +0200 Subject: ATI Radeon VE (was: Re: [Mplayer-users] new ffmpeg/libavcodec ) In-Reply-To: <200107241644.f6OGiSo24063@alison.hemmet.chalmers.se> References: <200107241624.f6OGOiD25687@post.hq.telecet.com> <200107241644.f6OGiSo24063@alison.hemmet.chalmers.se> Message-ID: <10323153152.20010725141702@gmx.de> Hello Christoph, Tuesday, July 24, 2001, 6:44:27 PM, you wrote: > Am Dienstag, 24. Juli 2001 22:25 schrieben Sie: >> Hi, Christoph Lampert! >> >> On 2001-07-24 17:28:24 you wrote: >> >Try the lastest XFree 4.1, or even CVS. In the log-file, there was a >> > remark that a bug about Radeon VE giving no picture was fixed now. I have >> > not seen any official "support" for it, but on the other hand, they >> > always write "Radeon supported" and ignore the VE. >> >> I have X-4.1.0 but it makes something like "power off" on my screen after >> startx. (Means liitle indicator of monitor is blinked) >> >> >Apart from this, atyfb (fbdev) should work, too, so you could set up >> >a X-Server on top of this. >> >> X-developers didn't updated X-documentation since 4.0.2 and I'm don't know >> any options of radeon_drv.o. > I read it in the ChangeLog of XFree-CVS... a bug that switched of graphics > port on Radeon VE... >> But I have found (on xfree86.org pages) that only SuSE does support >> Radeon VE. >> Then I've found on suse's ftp at: >> ftp://ftp.suse.com/pub/suse/i386/X/XFree86/XFree86-4.1.0-SuSE/ >> NEWS at 18 jul (i.e. 6 days ago) >> *********************** NEWS for Release 4.1.0-10 >> ****************************** >> >> - Support for Radeon VE (1002:5159) on SVGA Port >> ... >> ========================================================== >> And today I download (already half of day from top slower FTP of SuSE) this >> package. > Take a faster mirror, there are tons of those. > ftp.sunet.se/pub/Linux/distributions/suse is very good for me :-) > Many german universities have mirrors on faster connections, too. ftp.suselinux.hu is very fast for me! > gruel -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Wed Jul 25 14:15:23 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Wed, 25 Jul 2001 14:15:23 +0200 Subject: [Mplayer-users] MTRR settings for TNT2, use auto-added values? In-Reply-To: <20010724184610.A15184@telia.com> References: <20010724184610.A15184@telia.com> Message-ID: <13023054620.20010725141523@gmx.de> Hello Andr?, Tuesday, July 24, 2001, 6:46:10 PM, you wrote: > Hi folks, > I've been told the binary drivers from NVidia should automatically set up > correct MTRR settings for me, is this correct? The /proc/mtrr settings that > have been automatically configured for my 32 meg TNT2 card are: > reg00: base=0x00000000 ( 0MB), size= 128MB: write-back, count=1 > reg01: base=0xe0000000 (3584MB), size= 64MB: write-combining, count=1 > reg02: base=0xe6000000 (3680MB), size= 32MB: write-combining, count=1 > This differs a bit from the MTRR instructions as shipped with mplayer. For > an example, the reg0{0,1,2}: part isn't in those instructions. Also, the > memory size is specified in MB for me while the docs says they should be in > hex. Should I keep it the way it was automatically configured or should I > modify it? I'm loosing frames on high-res DivX movies with my PIII 550 and > I'm trying to find a way to fix it without buying a new processor. > lspci -v shows: > Memory at e4000000 (32-bit, non-prefetchable) [size=16M] > Memory at e6000000 (32-bit, prefetchable) [size=32M] > Is only the second one relevant when specifying MTRR? I think it's ok, problem will be cpu power, high res divx are very heacy decode load, maybe tryout divx4linux but it's beta and has some bugs (see DOCS/DivX4Linux in current CVS mplayer). -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Wed Jul 25 14:29:16 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Wed, 25 Jul 2001 14:29:16 +0200 Subject: [Mplayer-users] small changes to MPlayer-20010723 In-Reply-To: References: <20010725084520.B8607@sunrise.pg.gda.pl> Message-ID: <16423886767.20010725142916@gmx.de> Hello Attila, Wednesday, July 25, 2001, 10:08:35 AM, you wrote: > On Wed, 25 Jul 2001 08:45:20 +0200 Adam Tla/lka wrote: >> Next, what's about an idea of displaying subtitles below the film rectangle. >> We would see all of the film picture and subtitles wolud be more visible >> on the black border. Especially in fullscreen mode we have free space on the >> screen and if we place film window at the top left corner of the screen >> we could place subtitles just below the film window. > i would suggest different modes: > 1) place the picture in the middle, black borders at the top and the bottom > 2) place the picture at the top, black border at the bottom > Additionally to this an option for positioning the subs > But this rises an important question: > Do the black borders need to be transfered again and again ? > Or can they set once and never again ? I've already started on that with sdl out once, it's quite tricky: 1. Memory bandwidth increases up to 50% cause black bars need to be redrawed with osd, or otherwise osd will "smear" (old osd text not cleared) 2. It's tricky to do the memset with YUV images cause 0 is grey (or was it green) and not black, black has another code which need a not trivial method and to do this normal memset would be imho to slow cause you would have to do two memsets per pixel, another option for this would be to initialise the blackbars bitmap in another memoryarea and do a memcopy to the surface very time. > Attila Kinali -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From rpbrown at xtra.co.nz Wed Jul 25 14:33:13 2001 From: rpbrown at xtra.co.nz (mdew) Date: Thu, 26 Jul 2001 00:33:13 +1200 Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <200107251210.f6PCApB20534@pheidippides.md.chalmers.se> References: <200107251210.f6PCApB20534@pheidippides.md.chalmers.se> Message-ID: <20010726003313.5616cff8.rpbrown@xtra.co.nz> On Wed, 25 Jul 2001 14:10:51 +0200 (MET DST) Christoph Lampert wrote: > Hi, > > mplayer has many many many many more options than it prints with -h > (or even are in the manpage). Not many of them are needed my users, though. > -vc might be. > > gruel all switches should be listed, you can expect to guess the switch.. i still dont see -vc anywhere '-vc help' reprints the main help... _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Wed Jul 25 14:17:00 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Wed, 25 Jul 2001 14:17:00 +0200 Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <20010726000300.1b7aed88.rpbrown@xtra.co.nz> References: <200107232216.AAA35302@thot.banki.hu> <20010725230053.53d72b13.rpbrown@xtra.co.nz> <20010725133043.B29897@hoth.amu.edu.pl> <20010726000300.1b7aed88.rpbrown@xtra.co.nz> Message-ID: <20010725141700.A31906@hoth.amu.edu.pl> On Thu, Jul 26, 2001 at 12:03:00AM +1200, mdew wrote: > > mdew at storm:~/X_Men/XMen$ mplayer > > > MPlayer 0.17cvs-010725-21:10(C) 2000-2001 Arpad Gereoffy > > Usage: mplayer [options] [path/]name > > Options: > -vo select video output driver & device (see '-vo help' for list) > -ao select audio output driver & device (see '-ao help' for list) > -vcd play VCD (video cd) track from device instead of plain file > -dvdauth specify DVD device for authentication (for encrypted discs) > -ss seek to given (seconds or hh:mm:ss) position > -nosound don't play sound > -stereo select MPEG1 stereo output (0:stereo 1:left 2:right) > -fs -vm -zoom fullscreen playing options (fullscr,vidmode chg,softw.scale) > -x -y scale image to * resolution [if -vo driver supports!] > -sub specify subtitle file to use (see also -subfps, -subdelay) > -vid x -aid y options to select video (x) and audio (y) stream to play > -fps x -srate y options to change video (x fps) and audio (y Hz) rate > -pp enable postprocessing filter (0-4 for DivX, 0-63 for mpegs) > -bps use alternative A-V sync method for AVI files (may help!) > -framedrop enable frame-dropping (for slow machines) > > no -vc i can see....what needs configuring? man mplayer ? best regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Wed Jul 25 14:41:39 2001 From: kinali at gmx.net (Attila Kinali) Date: Wed, 25 Jul 2001 14:41:39 +0200 Subject: [Mplayer-users] Re: Intel Music Coder working In-Reply-To: <200107231216.OAA21950@thot.banki.hu> References: <20010723133107.B8593@convergence.de> <200107231216.OAA21950@thot.banki.hu> Message-ID: On Mon, 23 Jul 2001 14:16:56 +0200 (CEST) Arpi wrote: > > Hahaha, I'm sure the traffic will increase tenfold now! ;-) > > it's already too high... > > got 34GB output from this site in this month... I hope you don't pay per MB Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Wed Jul 25 14:46:23 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Wed, 25 Jul 2001 14:46:23 +0200 (MET DST) Subject: [Mplayer-users] new ffmpeg/libavcodec Message-ID: <200107251246.f6PCkNB21931@pheidippides.md.chalmers.se> >> no -vc i can see....what needs configuring? > >man mplayer ? > It's not in the man-page either (at least it wasn't in yesterdays CVS or so) but you can check main/cfg-mplayer.h Do you really want to see all of those when just typing mplayer ? gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Gibraltargatan 86 | CTH, Matematiskt centrum rum 637 | Eklandagatan 86, rum 2235 41279 Gothenburg | 41296 Gothenburg SWEDEN | SWEDEN Email: gruel at gmx.de | Email: lampert at math.chalmers.se | Tel. +46 31 772 5323 (office) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Wed Jul 25 14:55:34 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Wed, 25 Jul 2001 14:55:34 +0200 (CEST) Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <200107251246.f6PCkNB21931@pheidippides.md.chalmers.se> Message-ID: > It's not in the man-page either (at least it wasn't in yesterdays CVS or so) in yesterdays it is. > main/cfg-mplayer.h -- Dariusz Pietrzak Excuse me, I'm cixelsyd today _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Wed Jul 25 15:18:42 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Wed, 25 Jul 2001 16:18:42 +0300 (EEST) Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <200107251246.f6PCkNB21931@pheidippides.md.chalmers.se> Message-ID: On Wed, 25 Jul 2001, Christoph Lampert wrote: > main/cfg-mplayer.h > > Do you really want to see all of those when just typing mplayer ? how about output verboseness (-v?) affecting help (--help, -h) too? like 'mplayer -h -v' giving the whole mess? _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Wed Jul 25 15:13:30 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Wed, 25 Jul 2001 15:13:30 +0200 (MET DST) Subject: [Mplayer-users] new ffmpeg/libavcodec Message-ID: <200107251313.f6PDDVB22800@pheidippides.md.chalmers.se> >> It's not in the man-page either (at least it wasn't in yesterdays CVS or so) >in yesterdays it is. You are right, I didn't run make install yesterday because of the demuxer-change. I wanted to keep both versions... gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From as at sci.fi Wed Jul 25 15:48:32 2001 From: as at sci.fi (Anssi Saari) Date: Wed, 25 Jul 2001 16:48:32 +0300 Subject: [Mplayer-users] Brightness jump with ffmpeg Message-ID: <20010725164832.A28665@sci.fi> Hello, I have noticed a curious jump in brightness in some videos when using the ffmpeg divx codec. I have uploaded one such clip (brightness_problem.avi) to mplayerhq.hu:/MPlayer/incoming. In the clip, camera pans to the left and a desk becomes visible with some papers on it. At the next keyframe, 10s into the clip, the brightness of those papers jump noticeably. It doesn't happen using the Windows divx codec. Maybe it's a rounding problem? _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Wed Jul 25 16:18:51 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Wed, 25 Jul 2001 16:18:51 +0200 Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <200107251246.f6PCkNB21931@pheidippides.md.chalmers.se> References: <200107251246.f6PCkNB21931@pheidippides.md.chalmers.se> Message-ID: <20010725161851.A40332@hoth.amu.edu.pl> On Wed, Jul 25, 2001 at 02:46:23PM +0200, Christoph Lampert wrote: > > >> no -vc i can see....what needs configuring? > > > >man mplayer ? > > > > It's not in the man-page either (at least it wasn't in yesterdays CVS or so) > but you can check it is: grep -n "\-vc" mplayer.1 11:.RB [ \-vcd\ track\ number ] 56:.RB [ \-vc\ video\ codec\ name ] 100:.B \-vcd\ track 175:.B \-vc 179: -vc divx use VFW DivX codec 180: -vc divxds use DirectShow DivX codec 181: -vc ffdivx use libavcodec's DivX codec 182: -vc divx4 use ProjectMayo's DivX codec 198: (same as -vc odivx but fallback) 202: (same as -vc divx4 but fallback) > main/cfg-mplayer.h > > Do you really want to see all of those when just typing mplayer ? ?? best regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Wed Jul 25 17:17:22 2001 From: kinali at gmx.net (Attila Kinali) Date: Wed, 25 Jul 2001 17:17:22 +0200 Subject: [Mplayer-users] small changes to MPlayer-20010723 In-Reply-To: <200107250753.JAA44450@thot.banki.hu> References: <20010725084520.B8607@sunrise.pg.gda.pl> <200107250753.JAA44450@thot.banki.hu> Message-ID: Hi Arpi, On Wed, 25 Jul 2001 09:53:27 +0200 (CEST) Arpi wrote: > > * better detection of local display connection ("unix:" and "localhost:" are > > assumed local and automagically changed to ":" ) > i think there are better methods, because 192.168.1.1:0.0 is local too, if > you have an interface with this ip... I dont like this. If I tell an application to use a TCP socket than it should use a TCP socket. Never make a programm too intelligent. Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Wed Jul 25 17:14:46 2001 From: kinali at gmx.net (Attila Kinali) Date: Wed, 25 Jul 2001 17:14:46 +0200 Subject: [Mplayer-users] black borders and osd/sub In-Reply-To: <16423886767.20010725142916@gmx.de> References: <20010725084520.B8607@sunrise.pg.gda.pl> <16423886767.20010725142916@gmx.de> Message-ID: Hi Felix, On Wed, 25 Jul 2001 14:29:16 +0200 Felix Buenemann wrote: > > But this rises an important question: > > Do the black borders need to be transfered again and again ? > > Or can they set once and never again ? > > I've already started on that with sdl out once, it's quite tricky: > 1. Memory bandwidth increases up to 50% cause black bars need to be > redrawed with osd, or otherwise osd will "smear" (old osd text not > cleared) Sure, that has to be done. > 2. It's tricky to do the memset with YUV images cause 0 is grey (or > was it green) and not black, black has another code which need a not > trivial method and to do this normal memset would be imho to slow > cause you would have to do two memsets per pixel, another option for > this would be to initialise the blackbars bitmap in another memoryarea > and do a memcopy to the surface very time. What about storing which area is used by the OSD/Subs and only resetting this part ? This would limit the bandwith but increases the the computational expense and the diffculty of code. And I dont know if it could be just one function for all vo methods (don't know the differences of those at all) Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Wed Jul 25 17:20:52 2001 From: kinali at gmx.net (Attila Kinali) Date: Wed, 25 Jul 2001 17:20:52 +0200 Subject: [Mplayer-users] C-Media Electronics Inc CM8338A (cmpci) sound fails since kernel 2.4.6 In-Reply-To: <3B5E8B96.107@winealley.com> References: <3B5E8B96.107@winealley.com> Message-ID: On Wed, 25 Jul 2001 11:04:22 +0200 Jean-Luc Fontaine wrote: > I am baffled. > > I no longer get sound (just a big hiss) with mplayer (also aviplay) with > kernels 2.4.6 and 2.4.7 (used to work with 2.4.5). > > But I can still play mp3s just fine!!! > > Has anybody solved that problem? Try to debug it, there is a great SOUND-HOWTO, read it. Afterwards you should be able to tell us what doesn't work. Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 25 17:33:46 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 25 Jul 2001 17:33:46 +0200 (CEST) Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <20010725133043.B29897@hoth.amu.edu.pl> Message-ID: <200107251533.RAA46482@thot.banki.hu> Hi, > works fine for me :) (except Linux-only divx4) what's the prob with divx4? did you read DOCX/DivX4Linux ? > hmm today.ffmpeg.CVS is sloooooooow :( ( about 40% slower than > yesterday.ffmpeg.CVS) impossible. Gerard commited some optimization yesterday, and its's about 3% faster for me. Do you use it from ffmpeg CVS? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 25 17:34:48 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 25 Jul 2001 17:34:48 +0200 (CEST) Subject: [Mplayer-users] mpeg not playbackable (sound) In-Reply-To: <4321710908.20010725135300@gmx.de> Message-ID: <200107251534.RAA46526@thot.banki.hu> Hi, > > hmm. layer I isn't supported by mp3lib. > it should be in recent mpglib saw on mpg123 changelog that support for > it was added: http://www.mpg123.de/mpg123/CHANGES.CVS > > "- added VBR,Layer1,Layer2 in mpglib" yes, but mp3lib != mpglib it's totally different. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jfontain at winealley.com Wed Jul 25 17:43:25 2001 From: jfontain at winealley.com (Jean-Luc Fontaine) Date: Wed, 25 Jul 2001 17:43:25 +0200 Subject: [Mplayer-users] C-Media Electronics Inc CM8338A (cmpci) sound fails since kernel 2.4.6 References: <3B5E8B96.107@winealley.com> Message-ID: <3B5EE91D.9050605@winealley.com> Attila Kinali wrote: > On Wed, 25 Jul 2001 11:04:22 +0200 Jean-Luc Fontaine wrote: > > >>I am baffled. >> >>I no longer get sound (just a big hiss) with mplayer (also aviplay) with >>kernels 2.4.6 and 2.4.7 (used to work with 2.4.5). >> >>But I can still play mp3s just fine!!! >> >>Has anybody solved that problem? >> > > Try to debug it, there is a great SOUND-HOWTO, read it. > Afterwards you should be able to tell us what doesn't work. > > Attila Kinali > > I did that without results. A cat of a soundfile to /dev/dsp works but mplayer still fails (along with realplayer, ...). It seems to be kernel related, as I am not the only one with the problem: http://groups.google.com/groups?q=8338+linux&hl=en&safe=off&scoring=d&rnum=3&selm=linux.kernel.Pine.LNX.4.33.0107161237440.2356-100000%40cupotka.dyn.ee -- Jean-Luc Fontaine _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 25 17:39:17 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 25 Jul 2001 17:39:17 +0200 (CEST) Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <20010726000300.1b7aed88.rpbrown@xtra.co.nz> Message-ID: <200107251539.RAA28350@thot.banki.hu> Hi, > MPlayer 0.17cvs-010725-21:10(C) 2000-2001 Arpad Gereoffy > > Usage: mplayer [options] [path/]name > > Options: > -vo select video output driver & device (see '-vo help' for list) > -ao select audio output driver & device (see '-ao help' for list) > -vcd play VCD (video cd) track from device instead of plain file > -dvdauth specify DVD device for authentication (for encrypted discs) > -ss seek to given (seconds or hh:mm:ss) position > -nosound don't play sound > -stereo select MPEG1 stereo output (0:stereo 1:left 2:right) > -fs -vm -zoom fullscreen playing options (fullscr,vidmode chg,softw.scale) > -x -y scale image to * resolution [if -vo driver supports!] > -sub specify subtitle file to use (see also -subfps, -subdelay) > -vid x -aid y options to select video (x) and audio (y) stream to play > -fps x -srate y options to change video (x fps) and audio (y Hz) rate > -pp enable postprocessing filter (0-4 for DivX, 0-63 for mpegs) > -bps use alternative A-V sync method for AVI files (may help!) > -framedrop enable frame-dropping (for slow machines) > > no -vc i can see....what needs configuring? nothing. it's there, but missing from this short help. this help screen contains only very common options, but not all. you should read the end of help screen: * * * SEE MANPAGE FOR DETAILS, FURTHER OPTIONS AND KEYS ! * * * A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 25 17:47:10 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 25 Jul 2001 17:47:10 +0200 (CEST) Subject: [Mplayer-users] Re: Intel Music Coder working In-Reply-To: Message-ID: <200107251547.RAA34004@thot.banki.hu> Hi, > On Mon, 23 Jul 2001 14:16:56 +0200 (CEST) Arpi wrote: > > > > Hahaha, I'm sure the traffic will increase tenfold now! ;-) > > > > it's already too high... > > > > got 34GB output from this site in this month... > > I hope you don't pay per MB > no, it's on the school's network. (where i'm working as system admin) but it make unusual high output traffic... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 25 17:45:10 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 25 Jul 2001 17:45:10 +0200 (CEST) Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <20010726003313.5616cff8.rpbrown@xtra.co.nz> Message-ID: <200107251545.RAA28284@thot.banki.hu> Hi, > On Wed, 25 Jul 2001 14:10:51 +0200 (MET DST) > Christoph Lampert wrote: > > > Hi, > > > > mplayer has many many many many more options than it prints with -h > > (or even are in the manpage). Not many of them are needed my users, though. > > -vc might be. > > > > gruel > > all switches should be listed, you can expect to guess the switch.. i still dont see -vc anywhere '-vc help' reprints the main help... i don't agree. experimental options remain listed only in manpage or in the source. vc isn't so experimental, but it's more like a configfile option than commandline. afaik it's in the sample config file too. and -vc help isn't good syntax, this is why you got main help sccreen. use -vc ffdivx, for example. and RTFM DOCS/*.* A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 25 17:54:30 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 25 Jul 2001 17:54:30 +0200 (CEST) Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: Message-ID: <200107251554.RAA30806@thot.banki.hu> Hi, > On Wed, 25 Jul 2001, Christoph Lampert wrote: > > > main/cfg-mplayer.h > > > > Do you really want to see all of those when just typing mplayer ? > > how about output verboseness (-v?) affecting help (--help, -h) too? > like 'mplayer -h -v' giving the whole mess? > and who will maintain help file for all those debug and test options? (and translate it to several languages...) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 25 17:56:33 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 25 Jul 2001 17:56:33 +0200 (CEST) Subject: [Mplayer-users] Brightness jump with ffmpeg In-Reply-To: <20010725164832.A28665@sci.fi> Message-ID: <200107251556.RAA29168@thot.banki.hu> Hi, > I have noticed a curious jump in brightness in some videos when using the > ffmpeg divx codec. I have uploaded one such clip (brightness_problem.avi) > to mplayerhq.hu:/MPlayer/incoming. In the clip, camera pans to the left > and a desk becomes visible with some papers on it. At the next keyframe, > 10s into the clip, the brightness of those papers jump noticeably. It > doesn't happen using the Windows divx codec. Maybe it's a rounding > problem? > yes, it's known. i've read it on ffmpeg list some days ago. but Gerard don't know how to fix it, because all rounding stuff is correct, checked many times. is it ok with divx4 ? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Wed Jul 25 17:59:36 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Wed, 25 Jul 2001 17:59:36 +0200 Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <200107251533.RAA46482@thot.banki.hu> References: <20010725133043.B29897@hoth.amu.edu.pl> <200107251533.RAA46482@thot.banki.hu> Message-ID: <20010725175936.A43336@hoth.amu.edu.pl> On Wed, Jul 25, 2001 at 05:33:46PM +0200, Arpi wrote: > Hi, > > > works fine for me :) (except Linux-only divx4) > what's the prob with divx4? > did you read DOCX/DivX4Linux ? doesn't work with FreeBSD ;) > > hmm today.ffmpeg.CVS is sloooooooow :( ( about 40% slower than > > yesterday.ffmpeg.CVS) > impossible. > Gerard commited some optimization yesterday, and its's about 3% faster > for me. > > Do you use it from ffmpeg CVS? yup .. tested on MANY movies .. all about 35% slow than before :( -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 25 18:03:03 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 25 Jul 2001 18:03:03 +0200 (CEST) Subject: [Mplayer-users] black borders and osd/sub In-Reply-To: Message-ID: <200107251603.SAA21068@thot.banki.hu> Hi, > > 2. It's tricky to do the memset with YUV images cause 0 is grey (or > > was it green) and not black, black has another code which need a not > > trivial method and to do this normal memset would be imho to slow > > cause you would have to do two memsets per pixel, another option for > > this would be to initialise the blackbars bitmap in another memoryarea > > and do a memcopy to the surface very time. > > What about storing which area is used by the OSD/Subs and only > resetting this part ? This would limit the bandwith but increases > the the computational expense and the diffculty of code. Yes, this is my plan, but it requires reworking of many code. I have to rewrite OSD/SUB stuff after libvo2, so i'll do it so. I don't want to spend time with it now. > And I dont know if it could be just one function for all vo methods > (don't know the differences of those at all) currently every vo driver has it own osd code. with libvo2 it will be common. as libvo2 solves most of those problems by default i don't see any sense working and hacking libvo1 for these. i just need some days to get libvo2 working. but i don't have nowdays, sorry :( A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 25 18:06:46 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 25 Jul 2001 18:06:46 +0200 (CEST) Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <20010725175936.A43336@hoth.amu.edu.pl> Message-ID: <200107251606.SAA25358@thot.banki.hu> Hi, > > > works fine for me :) (except Linux-only divx4) > > what's the prob with divx4? > > did you read DOCX/DivX4Linux ? > > doesn't work with FreeBSD ;) Hmm. Ask Eugene to make a FreeBSD build. > > > hmm today.ffmpeg.CVS is sloooooooow :( ( about 40% slower than > > > yesterday.ffmpeg.CVS) > > impossible. > > Gerard commited some optimization yesterday, and its's about 3% faster > > for me. > > > > Do you use it from ffmpeg CVS? > > yup .. > > tested on MANY movies .. all about 35% slow than before :( hmm. slower than libavcodec in mplayer tree, or slower than ffmpeg tree yesterday? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Wed Jul 25 18:31:20 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Wed, 25 Jul 2001 18:31:20 +0200 Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <200107251606.SAA25358@thot.banki.hu> References: <20010725175936.A43336@hoth.amu.edu.pl> <200107251606.SAA25358@thot.banki.hu> Message-ID: <20010725183120.B43336@hoth.amu.edu.pl> On Wed, Jul 25, 2001 at 06:06:46PM +0200, Arpi wrote: > hmm. > slower than libavcodec in mplayer tree, or slower than ffmpeg tree > yesterday? than both .. results: FreeBSD 4.3 AMD K6-2 333MHz + C&T CT65554 + Xv gcc version 2.95.3 [FreeBSD] 20010315 (release) XFree86 Version 4.1.0 / X Window System (800x600x24bpp) MMX + 3DNow -nosound -benchmark -osdlevel 2 [-vc divx|divxds|ffdivx] 2001-07-21: mplayer ffmpeg 2001-07-24: first ffmpeg 0.4.5 merge 2001-07-25: cvs.ffmpeg-0.4.5 Best Results: Space Cowboys trailer (145s): [DIV3] 480x200 24bpp 24.00 fps 154.3 kbps ffdivx-010721: V: 27.304s VO: 9.011s A: 0.000s Sys: 17.221s = 53.536s ffdivx-010724: V: 28.377s VO: 8.893s A: 0.000s Sys: 17.343s = 54.613s ffdivx-010725: V: 40.395s VO: 9.040s A: 0.000s Sys: 17.438s = 66.873s MI2 trailer (121s): [DIV3] 480x204 24bpp 24.00 fps 700.6 kbps ffdivx-010721: V: 43.284s VO: 9.157s A: 0.000s Sys: 18.205s = 70.646s ffdivx-010724: V: 43.953s VO: 9.141s A: 0.000s Sys: 18.283s = 71.377s ffdivx-010725: V: 58.287s VO: 9.099s A: 0.000s Sys: 18.323s = 85.709s Tomb Raider trailer (136s): [DIV3] 480x260 24bpp 24.00 fps 761.0 kbps ffdivx-010721: V: 50.546s VO: 11.740s A: 0.000s Sys: 21.793s = 84.079s ffdivx-010724: V: 51.398s VO: 11.529s A: 0.000s Sys: 21.886s = 84.814s ffdivx-010725: V: 67.532s VO: 11.633s A: 0.000s Sys: 22.002s = 101.167s Wing Commander trailer (68s): [DIV3] 640x360 24bpp 24.00 fps 846.9 kbps ffdivx-010721: V: 40.928s VO: 8.217s A: 0.000s Sys: 19.745s = 68.889s ffdivx-010724: V: 41.755s VO: 8.130s A: 0.000s Sys: 19.653s = 69.538s ffdivx-010725: V: 58.956s VO: 8.082s A: 0.000s Sys: 19.766s = 86.805s Dune trailer (60s): [DIV3] 624x356 24bpp 24.00 fps 1154.6 kbps ffdivx-010721: V: 42.094s VO: 10.597s A: 0.000s Sys: 19.207s = 71.899s ffdivx-010724: V: 43.293s VO: 10.688s A: 0.000s Sys: 19.224s = 73.205s ffdivx-010725: V: 54.922s VO: 10.651s A: 0.000s Sys: 19.291s = 84.864s Gladiator trailer (85s): [DIV3] 480x272 24bpp 24.00 fps 986.1 kbps ffdivx-010721: V: 38.917s VO: 8.772s A: 0.000s Sys: 16.688s = 64.376s ffdivx-010724: V: 40.310s VO: 8.840s A: 0.000s Sys: 16.463s = 65.614s ffdivx-010725: V: 50.564s VO: 8.738s A: 0.000s Sys: 16.648s = 75.950s Ronin trailer (122s): [DIV3] 640x304 24bpp 25.00 fps 820.6 kbps ffdivx-010721: V: 77.311s VO: 14.713s A: 0.000s Sys: 35.946s = 127.971s ffdivx-010724: V: 79.369s VO: 14.606s A: 0.000s Sys: 35.541s = 129.516s ffdivx-010725: V: 107.839s VO: 14.650s A: 0.000s Sys: 35.901s = 158.390s Hannibal trailer (139s): [DIV3] 480x260 24bpp 24.00 fps 185.7 kbps ffdivx-010721: V: 38.055s VO: 13.345s A: 0.000s Sys: 23.882s = 75.283s ffdivx-010724: V: 39.615s VO: 13.283s A: 0.000s Sys: 23.924s = 76.821s ffdivx-010725: V: 52.868s VO: 13.440s A: 0.000s Sys: 23.640s = 89.948s Star Wars 1 trailer (147s): [DIV3] 640x288 24bpp 24.00 fps 995.3 kbps ffdivx-010721: V: 85.891s VO: 16.024s A: 0.000s Sys: 39.751s = 141.665s ffdivx-010724: V: 88.884s VO: 15.941s A: 0.000s Sys: 42.479s = 147.304s ffdivx-010725: V: 115.336s VO: 16.007s A: 0.000s Sys: 40.087s = 171.430s Highlander 4 trailer (97s): [DIV3] 520x310 24bpp 24.00 fps 892.7 kbps ffdivx-010721: V: 54.293s VO: 9.478s A: 0.000s Sys: 22.019s = 85.790s ffdivx-010724: V: 55.379s VO: 9.302s A: 0.000s Sys: 21.862s = 86.542s ffdivx-010725: V: 72.137s VO: 9.391s A: 0.000s Sys: 21.845s = 103.373s -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 25 19:29:51 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 25 Jul 2001 19:29:51 +0200 (CEST) Subject: [Mplayer-users] subtitles go unsyncronized in about an hour In-Reply-To: <200107181859.OAA29584@burns.luca.2y.net> Message-ID: <200107251729.TAA14946@thot.banki.hu> Hi, > Hi, I saw there are some questions/bugs about subtitles and it's my time to > speak. I'm having some problems with the syncronization. The problem is > that with a lot of filmes, the subtitles works just fine but when it played > about and hour, the subtitles starts to go unsyncronized, if I'm not wrong, What about this? I've fixed this some days ago, and asked teh results. But nobody answered. Does my fix works, or this problem still exists? (sub gets desynced after 1 hour) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From artur.zaprzala at talex.com.pl Wed Jul 25 20:11:36 2001 From: artur.zaprzala at talex.com.pl (Artur Zaprzala) Date: Wed, 25 Jul 2001 20:11:36 +0200 Subject: [Mplayer-users] Unicode support? Message-ID: <3B5F0BD8.A2BE7CDD@talex.com.pl> I found out in the source that Mplayer with -unicode switch doesn't realy support unicode (it probably should work with UTF-8) -- it reads at most 2 bytes per character and doesn't recognize UTF-8 sequences. It will surely work with euc-kr (Korean) encoding used by mpfc font creator. However, adding true unicode support will break current Korean support. Artur Zaprzala _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 25 20:28:59 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 25 Jul 2001 20:28:59 +0200 (CEST) Subject: [Mplayer-users] Unicode support? In-Reply-To: <3B5F0BD8.A2BE7CDD@talex.com.pl> Message-ID: <200107251828.UAA18144@thot.banki.hu> Hi, > I found out in the source that Mplayer with -unicode switch doesn't realy support unicode > (it probably should work with UTF-8) -- it reads at most 2 bytes per character and doesn't > recognize UTF-8 sequences. It will surely work with euc-kr (Korean) encoding used by mpfc > font creator. However, adding true unicode support will break current Korean support. > Someone sent a patch for UTF8 support soem days ago, but it wasn't yet applied to CVS. it uses -utf8 switch. That patch made many things in one, and i don't agree with all chanegs it does. But the unicode part of the patch is nice, usable. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From as at sci.fi Wed Jul 25 20:59:21 2001 From: as at sci.fi (Anssi Saari) Date: Wed, 25 Jul 2001 21:59:21 +0300 Subject: [Mplayer-users] Re: Brightness jump with ffmpeg In-Reply-To: <200107251556.RAA29168@thot.banki.hu>; from arpi@thot.banki.hu on Wed, Jul 25, 2001 at 05:56:33PM +0200 References: <20010725164832.A28665@sci.fi> <200107251556.RAA29168@thot.banki.hu> Message-ID: <20010725215921.A2342@sci.fi> On Wed, Jul 25, 2001 at 05:56:33PM +0200, Arpi wrote: > Hi, > > > I have noticed a curious jump in brightness in some videos when using the > > ffmpeg divx codec. I have uploaded one such clip (brightness_problem.avi) > > to mplayerhq.hu:/MPlayer/incoming. In the clip, camera pans to the left > > and a desk becomes visible with some papers on it. At the next keyframe, > > 10s into the clip, the brightness of those papers jump noticeably. It > > doesn't happen using the Windows divx codec. Maybe it's a rounding > > problem? > > > > yes, it's known. i've read it on ffmpeg list some days ago. > but Gerard don't know how to fix it, because all rounding stuff is > correct, checked many times. > > is it ok with divx4 ? No, similar problem, except that the papers are a little reddish in color. BTW, am I supposed to be able to use ffdivx if divx4 support is compiled in? I get a signal 11 in that case. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 25 21:08:49 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 25 Jul 2001 21:08:49 +0200 (CEST) Subject: [Mplayer-users] Re: Brightness jump with ffmpeg In-Reply-To: <20010725215921.A2342@sci.fi> Message-ID: <200107251908.VAA32532@thot.banki.hu> Hi, > > yes, it's known. i've read it on ffmpeg list some days ago. > > but Gerard don't know how to fix it, because all rounding stuff is > > correct, checked many times. > > > > is it ok with divx4 ? > > No, similar problem, except that the papers are a little reddish in color. Hmm. I thought it's 100% ok... > BTW, am I supposed to be able to use ffdivx if divx4 support is compiled > in? I get a signal 11 in that case. no, it should work. it does work for me together. can you debug that sig11? read DOCS/BUGREPORTS for details. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Wed Jul 25 22:08:04 2001 From: kinali at gmx.net (Attila Kinali) Date: Wed, 25 Jul 2001 22:08:04 +0200 Subject: [Mplayer-users] Re: Intel Music Coder working In-Reply-To: <200107251547.RAA34004@thot.banki.hu> References: <200107251547.RAA34004@thot.banki.hu> Message-ID: On Wed, 25 Jul 2001 17:47:10 +0200 (CEST) Arpi wrote: > no, it's on the school's network. > (where i'm working as system admin) > > but it make unusual high output traffic... I hope we dont run into problems because of that... 34GB/m isn't payable when hosted by an ISP. If you ever get into troubles, please let me know. Maybe I can arange something. Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From as at sci.fi Wed Jul 25 22:44:24 2001 From: as at sci.fi (Anssi Saari) Date: Wed, 25 Jul 2001 23:44:24 +0300 Subject: [Mplayer-users] Re: Brightness jump with ffmpeg In-Reply-To: <200107251908.VAA32532@thot.banki.hu>; from arpi@thot.banki.hu on Wed, Jul 25, 2001 at 09:08:49PM +0200 References: <20010725215921.A2342@sci.fi> <200107251908.VAA32532@thot.banki.hu> Message-ID: <20010725234423.B2342@sci.fi> On Wed, Jul 25, 2001 at 09:08:49PM +0200, Arpi wrote: > Hi, > > > > yes, it's known. i've read it on ffmpeg list some days ago. > > > but Gerard don't know how to fix it, because all rounding stuff is > > > correct, checked many times. > > > > > > is it ok with divx4 ? > > > > No, similar problem, except that the papers are a little reddish in color. > Hmm. I thought it's 100% ok... > > > > BTW, am I supposed to be able to use ffdivx if divx4 support is compiled > > in? I get a signal 11 in that case. > no, it should work. it does work for me together. > > can you debug that sig11? read DOCS/BUGREPORTS for details. Yes, I'll put the output below. I hope I'm not supposed to configure with --enable-debug? I did that and then it doesn't crash... Distribution: Debian Woody Kernel version: Linux dorkstar 2.2.19 #6 Wed Jun 6 15:56:06 EEST 2001 i686 unknown libc version: /lib/libc-2.2.3.so /lib/libc.so.5 /lib/libc.so.5.4.46 /lib/libc.so.6 X version: XFree86 Version 4.0.3 / X Window System gcc version: gcc version 2.95.4 20010319 (Debian prerelease) ld version: GNU ld version 2.11.90.0.7 (with BFD 2.11.90.0.7) binutils version: GNU assembler 2.11.90.0.7 Hardware & drivers: CPU info: processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 3 model name : AMD Duron(tm) Processor stepping : 1 cpu MHz : 799.619 cache size : 64 KB fdiv_bug : no hlt_bug : no sep_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 psn mmxext mmx fxsr 3dnowext 3dnow bogomips : 1595.80 video card manufacturer and model: Elsa Gladiac MX, NVidia Geforce 2MX 32MB SDRAM video driver type&version: NVidia 1.0-1251 sound card type & driver: Creative SB128PCI with OSS drivers of kernel > gdb mplayer-divx4 GNU gdb 19990928 Copyright 1998 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i686-pc-linux-gnu"...(no debugging symbols found)... (gdb) run -v -vfm 5 -nofs -pp 0 brightness_problem.avi Starting program: /usr/local/bin/mplayer-divx4 -v -vfm 5 -nofs -pp 0 brightness_problem.avi MPlayer 0.17cvs-010725-12:15(C) 2000-2001 Arpad Gereoffy CommandLine: '-v' '-vfm' '5' '-nofs' '-pp' '0' 'brightness_problem.avi' Reading /home/as/.mplayer/codecs.conf: 15 audio & 33 video codecs Font /home/as/.mplayer/font/font.desc loaded successfully! (140 chars) Detected AVI file format! ======= AVI Header ======= us/frame: 33367 (fps=29.970) max bytes/sec: 0 padding: 0 flags: (272) HAS_INDEX IS_INTERLEAVED frames total: 445 initial: 0 streams: 2 Suggested BufferSize: 0 Size: 352 x 248 ==> Found video stream: 0 ======= STREAM Header ======= Type: vids FCC: div3 (33766964) Flags: 0 Priority: 0 Language: 0 InitialFrames: 0 Rate: 2997/100 = 29.970 Start: 0 Len: 445 Suggested BufferSize: 7079 Quality 10000 Sample size: 0 found 'bih', 40 bytes of 40 ==> Found audio stream: 1 ======= STREAM Header ======= Type: auds FCC: (0) Flags: 0 Priority: 0 Language: 0 InitialFrames: 1 Rate: 11982/1 = 11982.000 Start: 0 Len: 177912 Suggested BufferSize: 5991 Quality -1 Sample size: 1 found 'wf', 30 bytes of 20 ======= WAVE Format ======= Format Tag: 85 (0x55) Channels: 2 Samplerate: 44100 avg byte/sec: 11982 Block align: 1 bits/sample: 0 cbSize: 12 Found movie at 0x280C - 0x1375C4 Reading INDEX block, 877 chunks for 445 frames AVI index offset: 10248 Auto-selected AVI audio ID = 1 Auto-selected AVI video ID = 0 AVI: Searching for audio stream (id:1) AVI video length=1080152 VIDEO: [DIV3] 352x248 24bpp 29.97 fps 582.0 kbps (71.0 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:352x248 fps:29.97 ftime:=0.0334 Detected audio codec: [mp3] drv:1 (MPEG layer-2, layer-3) Initializing audio codec... dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer mp3lib: Processor ID: 631 mp3lib: Using AMD 3dnow-dsp(k7)! optimized decore. AUDIO: srate=44100 chans=2 bps=2 sfmt=0x10 ratio: 12000->176400 Trying to force video codec driver family 5 ... Detected video codec: [ffdivx] drv:5 (FFmpeg DivX ;-) (MS MPEG-4 v3)) vo_debug: query(Planar YV12) returned 0x1 vo_debug1: out_fmt=Planar YV12 FFmpeg's libavcodec video codec libavcodec.size: 352 x 248 INFO: libavcodec init OK! VO: [xv] 352x248 => 352x248 Planar YV12 zoom VO: Description: X11/Xv VO: Author: Gerd Knorr video_out->init(352x248->352x248,flags=4,'MPlayer',0x32315659) vo: X11 color mask: FFFFFF (R:FF0000 G:FF00 B:FF) vo: X11 running at 1600x1200 depth: 32 (":0.0" => local display) Xvideo image format: 0x32595559 (YUY2) packed Xvideo image format: 0x32315659 (YV12) planar Xvideo image format: 0x59565955 (UYVY) packed Xvideo image format: 0x30323449 (I420) planar using Xvideo port 58 for hw scaling [xv] dcx: 1 dcy: 1 dx: 0 dy: 0 dw: 352 dh: 248 INFO: Video OUT driver init OK! AO: [oss] 44100Hz Stereo Signed 16-bit (Little-Endian) AO: Description: OSS/ioctl audio output AO: Author: A'rpi ao2: 44100 Hz 2 chans Signed 16-bit (Little-Endian) audio_setup: using '/dev/dsp' dsp device audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian)) audio_setup: using 44100 Hz samplerate (requested: 44100) audio_setup: frags: 128/128 (1024 bytes/frag) free: 131072 Initial frame delay A: 1 V: 0 AVI Initial frame delay: 0.033 START: a_pts=0.000 v_pts=0.000 Start playing... [xv] dcx: 1 dcy: 1 dx: 0 dy: 0 dw: 352 dh: 248 Initial PTS delay: -0.614 sec (calculated: -0.648) v: audio_delay=-0.648 buffer_delay=0.681 a.pts=0.033 v.pts=0.000 A: 0.0 ( 0.0) V: -0.0 A-V: 0.241 ct: 0.000 2 0% 0% 0.0% 0(no debugging symbols found)...(no debugging symbols found)...(no debugging symbols found)... Program received signal SIGSEGV, Segmentation fault. 0x809f78a in dprintf () (gdb) bt #0 0x809f78a in dprintf () (gdb) disass $eip-32 $eip+32 Dump of assembler code from 0x809f76a to 0x809f7aa: 0x809f76a : mov %eax,%edx 0x809f76c : add $0x10,%esp 0x809f76f : test %edx,%edx 0x809f771 : jl 0x809f7cf 0x809f773 : cmp (%esi),%edx 0x809f775 : jge 0x809f7cf 0x809f777 : mov 0xc(%esi),%eax 0x809f77a : movsbl (%edx,%eax,1),%edi 0x809f77e : mov 0x10(%esi),%eax 0x809f781 : movsbl (%edx,%eax,1),%ebx 0x809f785 : cmp (%esi),%edx 0x809f787 : add $0xf,%al 0x809f789 : popf 0x809f78a : rorb $0xb6,(%edi) 0x809f78d : call 0x932e3e1f 0x809f792 : add $0xa8,%al 0x809f794 : movsbl (%ebx,%eax,1),%eax 0x809f798 : add 0x24(%esp,1),%eax 0x809f79c : add $0xfffffff8,%esp 0x809f79f : push $0x1 0x809f7a1 : mov 0x24(%esp,1),%ecx 0x809f7a5 : add %eax,%edi 0x809f7a7 : push %ecx 0x809f7a8 : jmp 0x809f831 End of assembler dump. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 25 22:42:42 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 25 Jul 2001 22:42:42 +0200 (CEST) Subject: [Mplayer-users] Re: Intel Music Coder working In-Reply-To: Message-ID: <200107252042.WAA25398@thot.banki.hu> Hi, > > no, it's on the school's network. > > (where i'm working as system admin) > > > > but it make unusual high output traffic... > > I hope we dont run into problems because of that... > 34GB/m isn't payable when hosted by an ISP. Yes, I know... Btw it's 38GB now. and still have 5 days left... I will search for some mirror sites over the world. For example sourceforge ftp is a good starting point. Btw examining the logs I've found that biggest transfers are: 15GB - w32codec.zip 7GB - MPlayer-0.18pre.tar.gz 4.5GB - mplayer_03.gif 1.8GB - MPlayer-current.tar.bz2 The gif is small, but was downloaded >117000 times! It's unbelievable... > If you ever get into troubles, please let me know. > Maybe I can arange something. Ok, thx It's about 1.5GB/day now, it's ok, but unusual. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Wed Jul 25 22:47:55 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Wed, 25 Jul 2001 22:47:55 +0200 Subject: [Mplayer-users] how do you extract sub-titles from a DVD? In-Reply-To: <3B5EB525.4000603@winealley.com> References: <3B5EB525.4000603@winealley.com> Message-ID: <6453806479.20010725224755@gmx.de> Hello Jean-Luc, Wednesday, July 25, 2001, 2:01:41 PM, you wrote: > I am using the excellent transcode software for conversion to avi, but > that functionality is not there yet... under Windooze use SubRip software should be available on (hmmm, official homepage listed with my version doesn't seem to exist anymore, simply search for it on the net, I'm sure you'll find). -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From maximo at violadores.org Wed Jul 25 22:55:17 2001 From: maximo at violadores.org (Maximo Ramos) Date: Thu, 26 Jul 2001 05:55:17 +0900 Subject: [Mplayer-users] is there any -novideo option? Message-ID: <20010726055517.A13231@violadores.org> Hi!! I just got a .asx file .. just sound .. no video how can I make mplayer play this? :) there is no -novideo flag :( [/mnt/bigfoot/maximo]$mplayer -v ~/ytc_1_01.asx MPlayer 0.17cvs-010724-23:34(C) 2000-2001 Arpad Gereoffy CommandLine: '-v' '/home/ramos/ytc_1_01.asx' Reading /home/ramos/.mplayer/codecs.conf: 15 audio & 28 video codecs Font /home/ramos/.mplayer/font/font.desc loaded successfully! (8569 chars) Detected ASF file format! ASF: packets: 270 flags: 2 pack_size: 773 frame_size: 20812 Title: 1. YOUNG TURKS (Intro) - 1 Author: (?) I Copyright: (?) Ix Author: (?) I Comment: Rating: (None) stream type: guid_audio_stream stream concealment: guid_audio_conceal_interleave type: 28 bytes, stream: 8 bytes ID: 1 unk1: 0 unk2: 1F8F90 FILEPOS=0x1A4 ==> Found audio stream: 1 ======= WAVE Format ======= Format Tag: 353 (0x161) Channels: 2 Samplerate: 22050 avg byte/sec: 2503 Block align: 744 bits/sample: 16 cbSize: 10 ASF: audio scrambling: 1 x 1 x 744 Found movie at 0x290 - 0x331D6 Auto-selected ASF audio ID = 1 ds_fill_buffer: EOF reached (stream: video) ASF: no video stream found! ASF: Searching for audio stream (id:1) Sorry, no video stream... it's unplayable yet -- ---------------------------------------------------- Maximo Ramos >From The Land of The Morning Calm "I am free of prejudices. I hate everyone equally." ---------------------------------------------------- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Wed Jul 25 23:06:24 2001 From: arpi at thot.banki.hu (Arpi) Date: Wed, 25 Jul 2001 23:06:24 +0200 (CEST) Subject: [Mplayer-users] is there any -novideo option? In-Reply-To: <20010726055517.A13231@violadores.org> Message-ID: <200107252106.XAA60048@thot.banki.hu> Hi, > Hi!! > > I just got a .asx file .. just sound .. no video > > how can I make mplayer play this? :) you can't do that now. > there is no -novideo flag :( there is -vc null -vo null but it still requires at least one video stream. > > > > [/mnt/bigfoot/maximo]$mplayer -v ~/ytc_1_01.asx > > > MPlayer 0.17cvs-010724-23:34(C) 2000-2001 Arpad Gereoffy > > CommandLine: '-v' '/home/ramos/ytc_1_01.asx' > Reading /home/ramos/.mplayer/codecs.conf: 15 audio & 28 video codecs > Font /home/ramos/.mplayer/font/font.desc loaded successfully! (8569 chars) > Detected ASF file format! > ASF: packets: 270 flags: 2 pack_size: 773 frame_size: 20812 > > Title: 1. YOUNG TURKS (Intro) - 1 > > Author: (?) I > Copyright: (?) Ix Author: (?) I > Comment: > Rating: (None) > > stream type: guid_audio_stream > stream concealment: guid_audio_conceal_interleave > type: 28 bytes, stream: 8 bytes ID: 1 > unk1: 0 unk2: 1F8F90 > FILEPOS=0x1A4 > ==> Found audio stream: 1 > ======= WAVE Format ======= > Format Tag: 353 (0x161) > Channels: 2 > Samplerate: 22050 > avg byte/sec: 2503 > Block align: 744 > bits/sample: 16 > cbSize: 10 > ASF: audio scrambling: 1 x 1 x 744 > Found movie at 0x290 - 0x331D6 > Auto-selected ASF audio ID = 1 > ds_fill_buffer: EOF reached (stream: video) > ASF: no video stream found! > ASF: Searching for audio stream (id:1) > Sorry, no video stream... it's unplayable yet > > > -- > ---------------------------------------------------- > Maximo Ramos > >From The Land of The Morning Calm > "I am free of prejudices. I hate everyone equally." > ---------------------------------------------------- > > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Wed Jul 25 23:19:24 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Wed, 25 Jul 2001 23:19:24 +0200 Subject: [Mplayer-users] is there any -novideo option? In-Reply-To: <20010726055517.A13231@violadores.org>; from maximo@violadores.org on Thu, Jul 26, 2001 at 05:55:17AM +0900 References: <20010726055517.A13231@violadores.org> Message-ID: <20010725231924.A7248@woodstock.localdomain> It's the Question that drives us, Maximo Ramos : > ASF: Searching for audio stream (id:1) > Sorry, no video stream... it's unplayable yet What further info do you need? :) -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From andre.dahlqvist at telia.com Thu Jul 26 03:36:04 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Thu, 26 Jul 2001 03:36:04 +0200 Subject: [Mplayer-users] [patch] Remove 'make dep' from debian/rules file Message-ID: <20010726033603.A15621@telia.com> --- main/debian/rules~ Thu Jul 26 03:31:14 2001 +++ main/debian/rules Thu Jul 26 03:31:52 2001 @@ -7,7 +7,6 @@ build: $(checkdir) ./configure --prefix=/usr - make dep make mplayer touch build When I get some time I'll redo the debian package using debhelper. It can be cleaned up quiet a bit. -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Wed Jul 25 23:15:46 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Wed, 25 Jul 2001 23:15:46 +0200 Subject: [Mplayer-users] Re: Intel Music Coder working In-Reply-To: <200107252042.WAA25398@thot.banki.hu> References: <200107252042.WAA25398@thot.banki.hu> Message-ID: <01072523154602.00620@astral> On Wednesday, 25. July 2001 22:42, you wrote: > Hi, > > > > no, it's on the school's network. > > > (where i'm working as system admin) > > > > > > but it make unusual high output traffic... > > > > I hope we dont run into problems because of that... > > 34GB/m isn't payable when hosted by an ISP. > > Yes, I know... > Btw it's 38GB now. and still have 5 days left... > > I will search for some mirror sites over the world. For > example sourceforge ftp is a good starting point. > > Btw examining the logs I've found that biggest transfers are: > 15GB - w32codec.zip > 7GB - MPlayer-0.18pre.tar.gz > 4.5GB - mplayer_03.gif I bet it's that silly animated GIF on the homepage, it should be replaced with a static graphic. (Sorry chass, but it's like that). > 1.8GB - MPlayer-current.tar.bz2 let's rollout source releases to sourceforge download services. btw. I've seen some .iso files on the ftp, they could also cause much traffic. > > The gif is small, but was downloaded >117000 times! > It's unbelievable... > > > If you ever get into troubles, please let me know. > > Maybe I can arange something. > > Ok, thx > > It's about 1.5GB/day now, it's ok, but unusual. hmm, I have around 3GB downstream only traffic per day on my DSL dialup. =))) > > A'rpi / Astral & ESP-team > -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Thu Jul 26 00:07:29 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Thu, 26 Jul 2001 00:07:29 +0200 Subject: [Mplayer-users] "Taxi Driver.avi" works with windows .dll's but not with odivx or divx4 In-Reply-To: <20010725040649.A327@telia.com> References: <20010725035426.A23381@telia.com> <20010725040649.A327@telia.com> Message-ID: <01072600072905.00620@astral> On Wednesday, 25. July 2001 04:06, you wrote: > I should also add that -vc ffdivx plays this file just fine too. You should report bug to divx4 developers, there's a bug reporting form over at divx.com -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Wed Jul 25 23:30:18 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Wed, 25 Jul 2001 23:30:18 +0200 Subject: [Mplayer-users] Files don't play with -idx, but without In-Reply-To: <16938196293.20010721212822@gmx.de> References: <200107211706.f6LH6Za10005@alison.hemmet.chalmers.se> <16938196293.20010721212822@gmx.de> Message-ID: <01072523301804.00620@astral> On Saturday, 21. July 2001 21:28, you wrote: > Hello Christoph, > > Saturday, July 21, 2001, 7:06:32 PM, you wrote: > > Hi, > > > > I have two (broken?) DivX-AVis here which play normally though with a > > small error (chunksize...) and without index. But if I use -idx or > > -forceidx to generate an index, they fail to play: Win-DLL fails to load > > (could not open DLL???) > > -vc ffdivx and -vc divx4 even crash with a segfault. > > > > It does not happend with the first 1 or 10 MB... > > What is this? > > > > gruel > > ---------------------------------------------------- > > [schnipp] > > imho this usually happens when important memory areas are overwritten. Arpi, maybe it's memalloc problem of idx stuff, could you check? (when you find some free time, besides time to breath) -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Thu Jul 26 00:29:22 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Thu, 26 Jul 2001 00:29:22 +0200 Subject: [Mplayer-users] Re: Brightness jump with ffmpeg In-Reply-To: <20010725234423.B2342@sci.fi> References: <20010725215921.A2342@sci.fi> <200107251908.VAA32532@thot.banki.hu> <20010725234423.B2342@sci.fi> Message-ID: <01072600292207.00620@astral> On Wednesday, 25. July 2001 22:44, you wrote: > On Wed, Jul 25, 2001 at 09:08:49PM +0200, Arpi wrote: > > Hi, > > > > > > yes, it's known. i've read it on ffmpeg list some days ago. > > > > but Gerard don't know how to fix it, because all rounding stuff is > > > > correct, checked many times. > > > > > > > > is it ok with divx4 ? > > > > > > No, similar problem, except that the papers are a little reddish in > > > color. > > > > Hmm. I thought it's 100% ok... > > > > > BTW, am I supposed to be able to use ffdivx if divx4 support is > > > compiled in? I get a signal 11 in that case. > > > > no, it should work. it does work for me together. > > > > can you debug that sig11? read DOCS/BUGREPORTS for details. > > Yes, I'll put the output below. I hope I'm not supposed to configure > with --enable-debug? I did that and then it doesn't crash... you should at least then add -g to compilerflags to get debugging symbols. (see OPTFLAGS in config.mak) [schnipp] -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Thu Jul 26 01:14:15 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Thu, 26 Jul 2001 01:14:15 +0200 Subject: [Mplayer-users] Problems using mp.pl In-Reply-To: <20010724145605.A13482@telia.com> References: <20010724145605.A13482@telia.com> Message-ID: <01072601141509.00620@astral> On Tuesday, 24. July 2001 14:56, you wrote: > When using mp.pl with my Almost Famous movie (which is split in two parts) > strange things happen after mplayer jumps to the second file: > > DEMUXER: Too many (1652 in 8389868 bytes) video packets in the buffer! > (maybe you play a non-interleaved stream/file or video codec failed) > > Note that this does NOT happen if I start the second file manually. The > command I used to play these files was: > > TOOLS/mp.pl -ss 01:18:00 > /home/andre/incoming/almost.famous.cd1.dvdrip.divx-dominion.avi > /home/andre/incoming/almost.famous.cd2.dvdrip.divx-dominion.avi > > 01:18:00 is like 10 seconds before the first file is finished. btw. I guess that mp.pl is not doing what you expect, it does: mplayer -ss 01:18:00 avi1 mplayer -ss 01:18:00 avi2 > > Any clues? please try mplayer -ss 01:18:00 /home/andre/incoming/almost.famous.cd2.dvdrip.divx-dominion.avi and check if you get the above error. -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Wed Jul 25 23:25:04 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Wed, 25 Jul 2001 23:25:04 +0200 Subject: [Mplayer-users] Translations In-Reply-To: <200107211857.UAA39800@thot.banki.hu> References: <200107211857.UAA39800@thot.banki.hu> Message-ID: <01072523250403.00620@astral> On Saturday, 21. July 2001 20:57, you wrote: > Hi, > > > On Sat, Jul 21, 2001 at 05:35:23PM +0200, Andr? Dahlqvist wrote: > > > I assume there is work going on to translate mplayer itself to other > > > languages? I mean, there isn't much point in just having the > > > documentation in other languages. > > It's planned, but I dunno yet how. I hate locale/gettext stuff. > I think that "help wizard" messages (for example: Did you copied > codecs.conf to xyz? download codecs pack from ftp:... and install this way: > ... ) should go to a new file, maybe a .h file defined as constants. > configure should have an option to choosee language, and use the proper > language helps.h file. I also thought about that first, but than I thought having language resources loadable on the fly would be nicer, so how about having messages marked by an ID inside a text file and on mplayer start determine language for current user and load resources from text file into memory into an array of arrays of chars where index in first dimension of array is identical to id in the textfile, now just have something mprintf(2) or so, to printout id 2. If I'd isn't found in locales textfile, load it from english resource, if not found there show some error and abort mplayer. The tricky part is finding unique ids, so maybe also a tool should be written which scans sources and checks for next available id (no prob in Perl Fu :). > > But I agree with LGB in that normal program messages (like 'segmentation > fault' :)) shouldn't be translated. > > > Why? It does not worth I think. I'm Hungarian but I hate Hungarian > > softwares. English is the language of computing. And mplayer does not > > contain too much language dependent parts ... You must launch mplayer > > first. You can rename mplayer to mlejatszo [for Hungarian :)] but why? > > Any other information > > it's flej?tsz? :) > (movie -> film. or do you mean movie -> mozg?k?p ? :)) > > > needs to be translated: docs and sub support inside mplayer. And it's > > done > > Agree. > > > or can be done easily. So what other info do you want to translate? > > I think that multi-line detailed help and hint messages should be > translated too. later when GUI is integrated, they should be displayed in a > nice window with an animated picture of a wizard :) > > > A'rpi / Astral & ESP-team > -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Thu Jul 26 00:19:49 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Thu, 26 Jul 2001 00:19:49 +0200 Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <20010725183120.B43336@hoth.amu.edu.pl> References: <20010725175936.A43336@hoth.amu.edu.pl> <200107251606.SAA25358@thot.banki.hu> <20010725183120.B43336@hoth.amu.edu.pl> Message-ID: <01072600194906.00620@astral> On Wednesday, 25. July 2001 18:31, you wrote: > On Wed, Jul 25, 2001 at 06:06:46PM +0200, Arpi wrote: > > hmm. > > slower than libavcodec in mplayer tree, or slower than ffmpeg tree > > yesterday? > > than both .. aparently the only things done since that are: - implement macroblock skipping (faster decode of black bars) - replace emms code at end of functions before #ifdef'ed with emms_c() funtion which also works with plain c. [tests skipped] -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Thu Jul 26 09:49:20 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Thu, 26 Jul 2001 10:49:20 +0300 (EEST) Subject: [Mplayer-users] pause? Message-ID: could it be done so that only space or p unpauses the player? as it is now, even alt unpauses, and if i want to pause and switch to another task, i have to suspend the player or switch with mouse only, because it unpauses on alt+tab. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Thu Jul 26 10:37:52 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Thu, 26 Jul 2001 10:37:52 +0200 Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <01072600194906.00620@astral> References: <20010725175936.A43336@hoth.amu.edu.pl> <200107251606.SAA25358@thot.banki.hu> <20010725183120.B43336@hoth.amu.edu.pl> <01072600194906.00620@astral> Message-ID: <20010726103752.A90067@hoth.amu.edu.pl> On Thu, Jul 26, 2001 at 12:19:49AM +0200, Felix Buenemann wrote: > On Wednesday, 25. July 2001 18:31, you wrote: > > On Wed, Jul 25, 2001 at 06:06:46PM +0200, Arpi wrote: > > > hmm. > > > slower than libavcodec in mplayer tree, or slower than ffmpeg tree > > > yesterday? > > > > than both .. > aparently the only things done since that are: > - implement macroblock skipping (faster decode of black bars) > - replace emms code at end of functions before #ifdef'ed with emms_c() > funtion which also works with plain c. I repeat all tests on another machine (P750+TNT2) and there are slowdown too :( examples: Ronin trailer: [DIV3] 640x304 24bpp 25.00 fps 820.6 kbps cvs.010724: V: 24.178s VO: 9.157s A: 0.000s Sys: 17.702s = 51.037s cvs.010725: V: 25.362s VO: 9.210s A: 0.000s Sys: 17.808s = 52.380s Star Wars Episode 1 trailer: [DIV3] 640x288 24bpp 24.00 fps 995.3 kbps cvs.010724: V: 27.658s VO: 9.945s A: 0.000s Sys: 19.771s = 57.373s cvs.010725: V: 29.194s VO: 9.944s A: 0.000s Sys: 19.644s = 58.781s maybe this problem exist only on FreeBSD ? best regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Thu Jul 26 10:53:44 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Thu, 26 Jul 2001 10:53:44 +0200 (CEST) Subject: [Mplayer-users] Re: Intel Music Coder working In-Reply-To: <200107252042.WAA25398@thot.banki.hu> Message-ID: > I will search for some mirror sites over the world. For > example sourceforge ftp is a good starting point. let me know, I could set such mirror up. hmm, this shouldn't be a big issue anyway since those hottest files are tiny. -- Dariusz Pietrzak Excuse me, I'm cixelsyd today _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From as at sci.fi Thu Jul 26 12:19:01 2001 From: as at sci.fi (Anssi Saari) Date: Thu, 26 Jul 2001 13:19:01 +0300 Subject: [Mplayer-users] Re: Brightness jump with ffmpeg In-Reply-To: <01072600292207.00620@astral>; from atmosfear@users.sourceforge.net on Thu, Jul 26, 2001 at 12:29:22AM +0200 References: <20010725215921.A2342@sci.fi> <200107251908.VAA32532@thot.banki.hu> <20010725234423.B2342@sci.fi> <01072600292207.00620@astral> Message-ID: <20010726131900.A29769@sci.fi> On Thu, Jul 26, 2001 at 12:29:22AM +0200, Felix Buenemann wrote: > you should at least then add -g to compilerflags to get debugging symbols. > (see OPTFLAGS in config.mak) The problem seems to be rather elusive. I couldn't reproduce the problem this morning, until I tried running three copies of mplayer at the same time to compare the output of the different divx codecs. After I did that, I can't use ffdivx. And this only happens with the binary I compiled yesterday, any subsequent compile does not have the problem, debuginfo or no. Bleah, maybe I should check yesterday's sunspot activity... _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Thu Jul 26 12:44:39 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Thu, 26 Jul 2001 12:44:39 +0200 Subject: [Mplayer-users] Problems using mp.pl In-Reply-To: <01072601141509.00620@astral> References: <20010724145605.A13482@telia.com> <01072601141509.00620@astral> Message-ID: <20010726124439.A2381@telia.com> Felix Buenemann wrote: > please try mplayer -ss 01:18:00 > /home/andre/incoming/almost.famous.cd2.dvdrip.divx-dominion.avi and check if > you get the above error. Nope, that works fine. But maybe Arpi is right when he suspects a buggy audio driver? -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From leitner at convergence.de Thu Jul 26 13:14:58 2001 From: leitner at convergence.de (Felix von Leitner) Date: Thu, 26 Jul 2001 13:14:58 +0200 Subject: [Mplayer-users] small changes to MPlayer-20010723 In-Reply-To: <20010725084520.B8607@sunrise.pg.gda.pl> Message-ID: <20010726131458.A27978@convergence.de> Thus spake Adam Tla/lka (atlka at pg.gda.pl): > * better detection of local display connection ("unix:" and "localhost:" are > assumed local and automagically changed to ":" ) What is this about? Why would anyone want to detect a local display connection and then with a broken method like this (man ssh)? Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Thu Jul 26 16:01:14 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Thu, 26 Jul 2001 17:01:14 +0300 (EEST) Subject: [Mplayer-users] segfault Message-ID: i got a segfault. file is 'Ann Lee - 2 Times.asf', bug report is 'Ann Lee - 2 Times.asf.bugreport'. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atlka at pg.gda.pl Thu Jul 26 14:40:44 2001 From: atlka at pg.gda.pl (Adam Tla/lka) Date: Thu, 26 Jul 2001 14:40:44 +0200 Subject: [Mplayer-users] small changes to MPlayer-20010723 Message-ID: <20010726144044.A5854@sunrise.pg.gda.pl> Hello again, I corrected my previous patch which now implements: * reading subtitles text encoded in utf8 (option -utf8) is done in subreader.c just while reading the subtitles file (not in generating subtitles function) * changes in sub.c leading to calculating y position only once while displaying the same subtitle text on the screen * reading fonts files from LIBDIR/font if there is no font dir in ~/.mplayer * not displaying status while "-q" or "-quiet" option is on - maybe not all want this but on slower machines we should display only that what is absolutely needed (film and subtitles in my opinion) * better detection of local display connection ("unix:" and "localhost:" are assumed local and automagically changed to ":"). Maybe it's not quite correct but I like to use shm while on the same machine. Regards -- . . Adam Tla/lka mailto:atlka at pg.gda.pl ^v^ ^v^ ^v^ PGP public key: finger atlka at sunrise.pg.gda.pl -------------- next part -------------- diff -ruN MPlayer-20010723/cfg-mplayer.h MPlayer-20010723n/cfg-mplayer.h --- MPlayer-20010723/cfg-mplayer.h Sun Jul 22 11:46:54 2001 +++ MPlayer-20010723n/cfg-mplayer.h Thu Jul 26 13:28:20 2001 @@ -32,6 +32,7 @@ extern int vo_dbpp; extern int osd_level; extern int sub_unicode; +extern int sub_utf8; extern char *ao_outputfilename; extern int ao_pcm_waveheader; @@ -83,6 +84,8 @@ {"noautosub", &sub_auto, CONF_TYPE_FLAG, 0, 1, 0}, {"unicode", &sub_unicode, CONF_TYPE_FLAG, 0, 0, 1}, {"nounicode", &sub_unicode, CONF_TYPE_FLAG, 0, 1, 0}, + {"utf8", &sub_utf8, CONF_TYPE_FLAG, 0, 0, 1}, + {"noutf8", &sub_utf8, CONF_TYPE_FLAG, 0, 1, 0}, {"font", &font_name, CONF_TYPE_STRING, 0, 0, 0}, {"ffactor", &font_factor, CONF_TYPE_FLOAT, CONF_RANGE, 0.0, 10.0}, {"bg", &play_in_bg, CONF_TYPE_FLAG, 0, 0, 1}, @@ -182,6 +185,8 @@ {"verbose", &verbose, CONF_TYPE_INT, CONF_RANGE, 0, 100}, {"v", cfg_inc_verbose, CONF_TYPE_FUNC, 0, 0, 0}, + {"quiet", &quiet, CONF_TYPE_FLAG, 0, 0, 1}, + {"q", &quiet, CONF_TYPE_FLAG, 0, 0, 1}, {"-help", help_text, CONF_TYPE_PRINT, CONF_NOCFG, 0, 0}, {"help", help_text, CONF_TYPE_PRINT, CONF_NOCFG, 0, 0}, {"h", help_text, CONF_TYPE_PRINT, CONF_NOCFG, 0, 0}, diff -ruN MPlayer-20010723/libvo/font_load.c MPlayer-20010723n/libvo/font_load.c --- MPlayer-20010723/libvo/font_load.c Fri Jul 20 04:03:50 2001 +++ MPlayer-20010723n/libvo/font_load.c Tue Jul 24 13:35:44 2001 @@ -2,6 +2,9 @@ #include #include #include +#include +#include +#include #include "config.h" #include "font_load.h" @@ -42,6 +45,7 @@ unsigned char sor2[1024]; font_desc_t *desc; FILE *f; +struct stat fstate; char section[64]; int i,j; int chardb=0; @@ -51,10 +55,15 @@ desc=malloc(sizeof(font_desc_t));if(!desc) return NULL; memset(desc,0,sizeof(font_desc_t)); -desc->fpath=get_path("font/"); - -f=fopen(fname,"rt");if(!f){ printf("font: can't open file: %s\n",fname); return NULL;} +if (!(f = fopen(fname,"rt"))) { + printf("font: can't open file: %s\n",fname); + return NULL; +} +desc->fpath=get_path("font/"); + +if (stat(desc->fpath, &fstate)!=0) desc->fpath=DATADIR"/font" ; + // set up some defaults, and erase table desc->charspace=2; desc->spacewidth=12; diff -ruN MPlayer-20010723/libvo/sub.c MPlayer-20010723n/libvo/sub.c --- MPlayer-20010723/libvo/sub.c Tue Jun 12 16:03:18 2001 +++ MPlayer-20010723n/libvo/sub.c Thu Jul 26 12:57:50 2001 @@ -5,33 +5,31 @@ font_desc_t* vo_font=NULL; unsigned char* vo_osd_text="00:00:00"; -int sub_unicode=0; -static void vo_draw_text_osd(int dxs,int dys,void (*draw_alpha)(int x0,int y0, int w,int h, unsigned char* src, unsigned char *srca, int stride)){ - int len=strlen(vo_osd_text); +static inline void vo_draw_text_osd(int dxs,int dys,void (*draw_alpha)(int x0,int y0, int w,int h, unsigned char* src, unsigned char *srca, int stride)){ + unsigned char *v=vo_osd_text; + int c; int j; + int font; int y=10; int x=20; - for(j=0;jfont[c]; - if(font>=0) + for(;(c=*v)!=0;v++) + if((font=vo_font->font[c])>=0) { draw_alpha(x,y, vo_font->width[c], vo_font->pic_a[font]->h, vo_font->pic_b[font]->bmp+vo_font->start[c], vo_font->pic_a[font]->bmp+vo_font->start[c], vo_font->pic_a[font]->w); - x+=vo_font->width[c]+vo_font->charspace; - } - + x+=vo_font->width[c]+vo_font->charspace; + } } int vo_osd_progbar_type=-1; int vo_osd_progbar_value=100; // 0..255 -static void vo_draw_text_progbar(int dxs,int dys,void (*draw_alpha)(int x0,int y0, int w,int h, unsigned char* src, unsigned char *srca, int stride)){ +static inline void vo_draw_text_progbar(int dxs,int dys,void (*draw_alpha)(int x0,int y0, int w,int h, unsigned char* src, unsigned char *srca, int stride)){ int i; int y=dys/2; int x; @@ -42,8 +40,7 @@ x=(dxs-width)/2; // printf("osd.progbar width=%d xpos=%d\n",width,x); - c=vo_osd_progbar_type;font=vo_font->font[c]; - if(vo_osd_progbar_type>0 && font>=0) + if((c=vo_osd_progbar_type)>0 && (font=vo_font->font[c])>=0) draw_alpha(x-vo_font->width[c]-vo_font->spacewidth,y, vo_font->width[c], vo_font->pic_a[font]->h, @@ -51,19 +48,20 @@ vo_font->pic_a[font]->bmp+vo_font->start[c], vo_font->pic_a[font]->w); - c=OSD_PB_START;font=vo_font->font[c]; - if(font>=0) + c=OSD_PB_START; + if((font=vo_font->font[c])>=0) { draw_alpha(x,y, vo_font->width[c], vo_font->pic_a[font]->h, vo_font->pic_b[font]->bmp+vo_font->start[c], vo_font->pic_a[font]->bmp+vo_font->start[c], vo_font->pic_a[font]->w); - x+=vo_font->width[c]; + x+=vo_font->width[c]; + } for(i=0;ifont[c]; - if(font>=0) + c=(ifont[c])>=0) draw_alpha(x,y, vo_font->width[c], vo_font->pic_a[font]->h, @@ -73,8 +71,8 @@ x+=vo_font->width[c]; } - c=OSD_PB_END;font=vo_font->font[c]; - if(font>=0) + c=OSD_PB_END; + if((font=vo_font->font[c])>=0) draw_alpha(x,y, vo_font->width[c], vo_font->pic_a[font]->h, @@ -91,65 +89,85 @@ subtitle* vo_sub=NULL; static void vo_draw_text_sub(int dxs,int dys,void (*draw_alpha)(int x0,int y0, int w,int h, unsigned char* src, unsigned char *srca, int stride)){ +static subtitle *memsub=NULL; +static int memy; +static int memlines; +static int memcharspace; +static int memheight; int i; + int j; + int k; + int x; int y; - y=dys-(1+vo_sub->lines-1)*vo_font->height-10; + int c; + int len; + int font; + int *intp; + int lastStripPosition; + int previousStrip; + int xsize; + int lastxsize; + + if(memsub!=vo_sub) { /* calculate y-position if needed */ + + memsub=vo_sub; + memlines=vo_sub->lines; + memcharspace=vo_font->charspace; + memheight=vo_font->height; + + y=dys-(1+memlines-1)*vo_font->height-10; // too long lines divide into smaller ones - for(i=0;ilines;i++){ - unsigned char* text=vo_sub->text[i]; - int len=strlen(text); - int j; - int xsize=-vo_font->charspace; - int lastStripPosition=-1; - int previousStrip=0; - int lastxsize=0; - + for(i=0;i0;i++){ + xsize=-memcharspace; + lastStripPosition=-1; + previousStrip=0; + lastxsize=0; + + intp=(int *)vo_sub->text[i]; + len=*intp++; + for(j=0;j=0x80)) c=(c<<8)+text[++j]; - w = vo_font->width[c]; - if (text[j]==' ' && dxs>xsize) + c=intp[j]; + if (c==' ' && dxs>xsize) { lastStripPosition=j; lastxsize=xsize; } - xsize+=w+vo_font->charspace; + xsize+=vo_font->width[c]+memcharspace; if (dxs0) { xsize=lastxsize; j=lastStripPosition; - y-=vo_font->height; + y-=memheight; previousStrip=lastStripPosition; - xsize=-vo_font->charspace; + xsize=-memcharspace; } } } - - for(i=0;ilines;i++){ - unsigned char* text=vo_sub->text[i];// "Hello World! H?DEJ?!"; - int len=strlen(text); - int j,k; - int xsize=-vo_font->charspace; - int x=0; - - int lastStripPosition=-1; - int previousStrip=0; - int lastxsize=xsize; - + memy = y; + } /* calculate y-position if needed */ else + y = memy; + + for(i=0;itext[i]; + len=*intp++; + for(j=0;j=0x80)) c=(c<<8)+text[++j]; - w = vo_font->width[c]; + c=intp[j]; if (c==' ' && dxs>xsize) { lastStripPosition=j; lastxsize=xsize; } - xsize+=w+vo_font->charspace; + xsize+=vo_font->width[c]+memcharspace; if ((dxs0) || j==len-1) { if (j==len-1) lastStripPosition=len; @@ -159,10 +177,8 @@ x=dxs/2-xsize/2; for(k=previousStrip;k=0x80)) c=(c<<8)+text[++k]; - font=vo_font->font[c]; + c = intp[k] ; + font=vo_font->font[c]; if(x>=0 && x+vo_font->width[c]=0) draw_alpha(x,y, @@ -171,12 +187,12 @@ vo_font->pic_b[font]->bmp+vo_font->start[c], vo_font->pic_a[font]->bmp+vo_font->start[c], vo_font->pic_a[font]->w); - x+=vo_font->width[c]+vo_font->charspace; + x+=vo_font->width[c]+memcharspace; } x=0; - y+=vo_font->height; + y+=memheight; previousStrip=lastStripPosition; - xsize=lastxsize=-vo_font->charspace; + xsize=lastxsize=-memcharspace; } } } @@ -186,6 +202,7 @@ static int draw_alpha_init_flag=0; extern void vo_draw_alpha_init(); + void vo_draw_text(int dxs,int dys,void (*draw_alpha)(int x0,int y0, int w,int h, unsigned char* src, unsigned char *srca, int stride)){ diff -ruN MPlayer-20010723/libvo/x11_common.c MPlayer-20010723n/libvo/x11_common.c --- MPlayer-20010723/libvo/x11_common.c Thu Jul 19 20:47:22 2001 +++ MPlayer-20010723n/libvo/x11_common.c Tue Jul 24 11:04:21 2001 @@ -91,7 +91,11 @@ } XDestroyImage( mXImage ); // XCloseDisplay( mDisplay ); -#warning Better local display detection method is needed. + /* slightly improved local display detection AST */ + if ( strncmp(mDisplayName, "unix:", 5) == 0) + mDisplayName += 4; + else if ( strncmp(mDisplayName, "localhost:", 10) == 0) + mDisplayName += 9; if (*mDisplayName==':') mLocalDisplay=1; else mLocalDisplay=0; printf("vo: X11 running at %dx%d depth: %d (\"%s\" => %s display)\n",vo_screenwidth,vo_screenheight,vo_depthonscreen,mDisplayName,mLocalDisplay?"local":"remote"); return 1; diff -ruN MPlayer-20010723/mplayer.c MPlayer-20010723n/mplayer.c --- MPlayer-20010723/mplayer.c Sun Jul 22 00:36:39 2001 +++ MPlayer-20010723n/mplayer.c Thu Jul 26 13:30:59 2001 @@ -76,6 +76,7 @@ int nogui=1; #endif int verbose=0; +int quiet=0; #define ABS(x) (((x)>=0)?(x):(-(x))) @@ -557,13 +558,12 @@ // check font if(font_name){ - vo_font=read_font_desc(font_name,font_factor,verbose>1); - if(!vo_font) fprintf(stderr,"Can't load font: %s\n",font_name); + if(!(vo_font=read_font_desc(font_name,font_factor,verbose>1))) + fprintf(stderr,"Can't load font: %s\n",font_name); } else { // try default: - vo_font=read_font_desc(get_path("font/font.desc"),font_factor,verbose>1); - if(!vo_font) - vo_font=read_font_desc(DATADIR"/font/font.desc",font_factor,verbose>1); + if(!(vo_font=read_font_desc(get_path("font/font.desc"),font_factor,verbose>1))) + vo_font=read_font_desc(DATADIR"/font/font.desc",font_factor,verbose>1); } // check .sub @@ -1350,6 +1350,7 @@ float x=frame_correction; if(delay_corrected){ // printf("A:%6.1f V:%6.1f A-V:%7.3f",a_pts-audio_delay-delay,v_pts,x); + if(!quiet) printf("A:%6.1f (%6.1f) V:%6.1f A-V:%7.3f",a_pts,a_pts-audio_delay-delay,v_pts,x); x*=0.1f; if(x<-max_pts_correction) x=-max_pts_correction; else @@ -1359,6 +1360,7 @@ else max_pts_correction=sh_video->frametime*0.10; // +-10% of time sh_audio->timer+=x; c_total+=x; + if(!quiet) printf(" ct:%7.3f %3d %2d%% %2d%% %4.1f%% %d\r",c_total, (int)num_frames, (sh_video->timer>0.5)?(int)(100.0*video_time_usage/(double)sh_video->timer):0, @@ -1379,6 +1381,7 @@ float v_pts=d_video->pts; if(frame_corr_num==5){ // printf("A: --- V:%6.1f \r",v_pts); + if(!quiet) printf("V:%6.1f %3d %2d%% %2d%% %3.1f%% \r",v_pts, (int)num_frames, (sh_video->timer>0.5)?(int)(100.0*video_time_usage/(double)sh_video->timer):0, @@ -1746,10 +1749,13 @@ current_module=NULL; c_total=0; // kell ez? - printf("A:%6.1f V:%6.1f A-V:%7.3f",d_audio->pts,d_video->pts,0.0f); - printf(" ct:%7.3f \r",c_total);fflush(stdout); + if(!quiet) { + printf("A:%6.1f V:%6.1f A-V:%7.3f",d_audio->pts,d_video->pts,0.0f); + printf(" ct:%7.3f \r",c_total);fflush(stdout); + } } else { - printf("A: --- V:%6.1f \r",d_video->pts);fflush(stdout); + if(!quiet) + printf("A: --- V:%6.1f \r",d_video->pts);fflush(stdout); } // Set OSD: diff -ruN MPlayer-20010723/subreader.c MPlayer-20010723n/subreader.c --- MPlayer-20010723/subreader.c Sat Jun 9 22:09:18 2001 +++ MPlayer-20010723n/subreader.c Thu Jul 26 14:00:09 2001 @@ -16,7 +16,8 @@ #define ERR (void *)-1 - +int sub_unicode = 0; +int sub_utf8 = 0; int sub_uses_time=0; int sub_errs=0; int sub_num=0; // number of subtitle structs @@ -372,6 +373,56 @@ return -1; // too many bad lines } +#define MAX_INTS_TABLE 1024 + +static inline int generateints(subtitle *csub) { + int i,l,c,r; + unsigned char *t; + int *intp; + int intt[MAX_INTS_TABLE]; + int *d; + int *s; + + for(r=1,i=0;ilines;i++) { + for(l=0,t=csub->text[i];*t!='\0';t++) { + if((c=*t)>=0x80) { + if(sub_unicode) c = (c<<8) + *++t; else + if(sub_utf8) { + if((c & 0xe0) == 0xc0) /* 2 bytes U+00080..U+0007FF */ + c = (c & 0x1f)<<6 | + (*++t & 0x3f); + else if((c & 0xf0) == 0xe0) /* 3 bytes U+00800..U+00FFFF */ + c = ((c & 0x0f)<<6 | + (*++t & 0x3f))<<6 | + (*++t & 0x3f); + else if((c & 0xf8) == 0xf0) /* 4 bytes U+10000..U+10FFFF */ + c = (((c & 0x07)<<6 | + (*++t & 0x3f))<<6 | + (*++t & 0x3f))<<6 | + (*++t & 0x3f); + } + } + intt[l++]=c; + if(l==MAX_INTS_TABLE) { + printf("\nError - subtitles line too long - cutting\n"); + break; + } + } + if((intp=malloc((l+1)*sizeof(int)))==NULL) { + printf("\nError alocating memory for unicode subtitles\n"); + r=0; + break; + } else { + intp[0]=l; /* store length */ + for(d=intp+1,s=intt;l>0;l--) *d++=*s++; /* store ints */ + free(csub->text[i]); /* free unused mem */ + csub->text[i]=(char *)intp; /* memorize ints */ + } + } + if(!r) + for(i=0;ilines;i++) free(csub->text[i]); /* free mem on error */ + return r; +} subtitle* sub_read_file (char *filename) { FILE *fd; @@ -409,6 +460,7 @@ } sub=func[sub_format](fd,&first[sub_num]); if(!sub) break; // EOF + if((sub!=ERR) && !generateints(sub)) sub=ERR; if(sub==ERR) ++sub_errs; else ++sub_num; // Error vs. Valid } @@ -527,4 +579,5 @@ printf ("Read %i subtitles, %i errors.\n", sub_num, sub_errs); return 0; } + #endif From gabucino at k2.jozsef.kando.hu Thu Jul 26 16:22:10 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Thu, 26 Jul 2001 16:22:10 +0200 Subject: [Mplayer-users] small changes to MPlayer-20010723 In-Reply-To: <20010726144044.A5854@sunrise.pg.gda.pl>; from atlka@pg.gda.pl on Thu, Jul 26, 2001 at 02:40:44PM +0200 References: <20010726144044.A5854@sunrise.pg.gda.pl> Message-ID: <20010726162210.A1828@woodstock.localdomain> It's the Question that drives us, Adam Tla/lka : > I corrected my previous patch which now implements: Methinks you shouldn't create a patch which changes this much stuff. Then Arpi could reject just some, not all. :) -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From atmosfear at users.sourceforge.net Thu Jul 26 17:57:28 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Thu, 26 Jul 2001 17:57:28 +0200 Subject: [Mplayer-users] small changes to MPlayer-20010723 In-Reply-To: <20010726162210.A1828@woodstock.localdomain> References: <20010726144044.A5854@sunrise.pg.gda.pl> <20010726162210.A1828@woodstock.localdomain> Message-ID: <54122778756.20010726175728@gmx.de> Hello Gabucino, Thursday, July 26, 2001, 4:22:10 PM, you wrote: > It's the Question that drives us, Adam Tla/lka : >> I corrected my previous patch which now implements: > Methinks you shouldn't create a patch which changes this much stuff. > Then Arpi could reject just some, not all. :) yes, it's better to split it up into one patch for one problem. So have 4 different patches or so. -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From brendan at tjs.org Thu Jul 26 18:28:28 2001 From: brendan at tjs.org (brendan at tjs.org) Date: Thu, 26 Jul 2001 11:28:28 -0500 Subject: [Mplayer-users] Some questions... Message-ID: <20010726112828.A9976@colby.tjs.org> I've been working on an MPlayer HOWTO for a little while, and a couple of things have come up that would be nice to get answered: 1. Just what is libpng used for? 2. How would one go about creating RPMs from the source, like has been done with debian? I'm fairly certain that someone has made RPMs out of MPlayer by now, how come the RPM control files aren't a part of the MPlayer distribution? That's about it for now, stop by http://q3test.2y.net/~moyix/mp-howto/ to see how it's coming (comments & corrections would be especially appreciated). Right now it only has sections I-III, but the complete Table of Contents is there, so you can see what I'm planning on adding. Thanks! -Brendan _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Thu Jul 26 23:50:19 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Thu, 26 Jul 2001 21:50:19 +0000 (:) Subject: [Mplayer-users] Re: ATI Radeon VE Message-ID: Hi! My efforts are finished. I've get something workable from XFree86 :( But I've found a lot of lacks and I don't know where are problems :( 1) After applying Suse's XFree86 I could get graphics only on "second head" It's - ok from windows and linux points but some "old" DOS games which use VESA (through int10h) can work only with first head so I should replug monitor every time when I want to use them. 2) Speed of this card from video point is too highest: I've watched DVD in full screen at 1024x768x24 under WinNT without losing of frames with maximal CPU loading - about 80%. The same quality of output loads cpu only on 30-40% (with little peaks up to 60%) under Linux. (MTRR I've not touched) Of course - through my new SBLive 5.1. Remark: Under WinNT 4.0 ATI's drivers don't support MPEG2 hardware decoder so it's "pure" time of software's decoding. Now about problems: MPLAYER: works only -vo xv, x11, sdl:x11 -dga works but too strange: I've watched in window only horizontal lines (like I've get overclocked vertical sync but in window :) -fsdga - not found. Well: when I watched well famous 405.avi I've get at bottom of picture several strange green lines (like on nVidia). Also I've found some strange transparent diagonalled stripes which have green and pink colors. But it's not problem of unquantize - on S3Virge everythink - ok). When I've watched DVD then in places where store is movied (even slowly) I've get very crumpled pictures with horizontal jaming. (Under WinNT these problems don't exist). AFAIK it would be better to find out solution these problems in Linux's drivers, but it makes useless any video software under Linux with this card. Resume: This card is perfect solution for video. It has HW MPEG1, MPEG2 decoders and HW iDCT block (MPEG4 acceleration) but drivers - sucks. These words could be said for SBLive! 5.1 - from point of sound quality it's sucks against Vortex2, but Vortex has very terrible drivers under any OS except Win95 and its place in shop. So I don't know: But as it was commented on linhardware.com - would be better to spend this money for greenpeace than paid them for VE. Best regards! Nick _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From asalamon at elender.hu Thu Jul 26 19:42:09 2001 From: asalamon at elender.hu (Andras Salamon) Date: Thu, 26 Jul 2001 19:42:09 +0200 (CEST) Subject: [Mplayer-users] Some questions... In-Reply-To: <20010726112828.A9976@colby.tjs.org> Message-ID: On Thu, 26 Jul 2001 brendan at tjs.org wrote: > I've been working on an MPlayer HOWTO for a little while, and a couple of things > have come up that would be nice to get answered: > > 1. Just what is libpng used for? -vo png > 2. How would one go about creating RPMs from the source, like has been done with > debian? I'm fairly certain that someone has made RPMs out of MPlayer by now, how > come the RPM control files aren't a part of the MPlayer distribution? > I use a program called checkinstall (after ./configure;make). It executes 'make install' logs everything, creates (and installs) an rpm file. Other possibility is creating an rpm spec file. You can find several on the net. Sala > That's about it for now, stop by http://q3test.2y.net/~moyix/mp-howto/ to see > how it's coming (comments & corrections would be especially appreciated). Right > now it only has sections I-III, but the complete Table of Contents is there, so > you can see what I'm planning on adding. > > Thanks! > -Brendan > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Thu Jul 26 20:00:16 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Thu, 26 Jul 2001 20:00:16 +0200 Subject: [Mplayer-users] Some questions... In-Reply-To: <20010726112828.A9976@colby.tjs.org> References: <20010726112828.A9976@colby.tjs.org> Message-ID: <8130146761.20010726200016@gmx.de> Hello brendan, Thursday, July 26, 2001, 6:28:28 PM, you wrote: > I've been working on an MPlayer HOWTO for a little while, and a couple of things > have come up that would be nice to get answered: > 1. Just what is libpng used for? -vo png writes frames to png files. > 2. How would one go about creating RPMs from the source, like has been done with > debian? I'm fairly certain that someone has made RPMs out of MPlayer by now, how > come the RPM control files aren't a part of the MPlayer distribution? only solution would be source rpms (debian package also compiles). > That's about it for now, stop by http://q3test.2y.net/~moyix/mp-howto/ to see > how it's coming (comments & corrections would be especially appreciated). Right > now it only has sections I-III, but the complete Table of Contents is there, so > you can see what I'm planning on adding. you don't need cvs login after first cvs checkout and you should note that anonymous cvs is using an empty password so users aren't puzzled what to type. > Thanks! > -Brendan -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Thu Jul 26 20:16:57 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Thu, 26 Jul 2001 20:16:57 +0200 Subject: [Mplayer-users] Some questions... In-Reply-To: <8130146761.20010726200016@gmx.de> References: <20010726112828.A9976@colby.tjs.org> <8130146761.20010726200016@gmx.de> Message-ID: <200107261816.f6QIGw003361@alison.hemmet.chalmers.se> Am Donnerstag, 26. Juli 2001 20:00 schrieben Sie: > > you don't need cvs login after first cvs checkout and you should note > that anonymous cvs is using an empty password so users aren't puzzled > what to type. Normally, users are even more puzzled what to type and keep asking: "What should I type as password? I have no password! My hotmail password does not work! Help me... *whining noises* " gruel -- Christoph Lampert, gruel at gmx.de "Linux is a cancer that attaches itself in an intellectual property sense to everything it touches. That's the way that the license works." - Steve Balmer "Epsilon < 0" - chl _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Thu Jul 26 22:00:29 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Thu, 26 Jul 2001 22:00:29 +0200 Subject: [Mplayer-users] Some questions... In-Reply-To: <200107261816.f6QIGw003361@alison.hemmet.chalmers.se> References: <20010726112828.A9976@colby.tjs.org> <8130146761.20010726200016@gmx.de> <200107261816.f6QIGw003361@alison.hemmet.chalmers.se> Message-ID: <170137360193.20010726220029@gmx.de> Hello Christoph, Thursday, July 26, 2001, 8:16:57 PM, you wrote: > Am Donnerstag, 26. Juli 2001 20:00 schrieben Sie: >> >> you don't need cvs login after first cvs checkout and you should note >> that anonymous cvs is using an empty password so users aren't puzzled >> what to type. > Normally, users are even more puzzled what to type and keep asking: "What > should I type as password? I have no password! My hotmail password does not > work! Help me... *whining noises* " Quoting http://www.heise.de/newsticker/data/thd-26.07.01-000/: MSNs Hotmail hat in diesem Vergleichstest in der Testkategorie "Allgemeine Gesch?ftsbedingungen" die schlechtesten Noten bekommen. Die Rechtsexperten der Stiftung fanden allein sieben Verst??e gegen geltendes deutsches Recht. Im Gesamturteil erhielt Hotmail lediglich ein ausreichend ? Kommentar der Warentester: "Nicht empfehlenswert". (Rough translation: Hotmail suxx!) > gruel -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Thu Jul 26 22:22:54 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Thu, 26 Jul 2001 22:22:54 +0200 Subject: [Mplayer-users] Some questions... In-Reply-To: <170137360193.20010726220029@gmx.de> References: <20010726112828.A9976@colby.tjs.org> <200107261816.f6QIGw003361@alison.hemmet.chalmers.se> <170137360193.20010726220029@gmx.de> Message-ID: <200107262022.f6QKMt503943@alison.hemmet.chalmers.se> Am Donnerstag, 26. Juli 2001 22:00 schrieben Sie: > > Normally, users are even more puzzled what to type and keep asking: "What > > should I type as password? I have no password! My hotmail password does > > not work! Help me... *whining noises* " > > Quoting http://www.heise.de/newsticker/data/thd-26.07.01-000/: > MSNs Hotmail hat in diesem Vergleichstest in der Testkategorie > "Allgemeine Gesch?ftsbedingungen" die schlechtesten Noten bekommen. > Die Rechtsexperten der Stiftung fanden allein sieben Verst??e gegen > geltendes deutsches Recht. Im Gesamturteil erhielt Hotmail > lediglich ein ausreichend ? Kommentar der Warentester: "Nicht > empfehlenswert". > > (Rough translation: Hotmail suxx!) Yes, I know. That's why I don't use it (instead I have gmx and web.de, which isn't much better, I guess...) But the whining users have hotmail, you can bet your grandma on that ;-) gruel -- Christoph Lampert, gruel at gmx.de "Linux is a cancer that attaches itself in an intellectual property sense to everything it touches. That's the way that the license works." - Steve Balmer "Epsilon < 0" - chl _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 26 22:38:51 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 26 Jul 2001 22:38:51 +0200 (CEST) Subject: [Mplayer-users] Files don't play with -idx, but without In-Reply-To: <01072523301804.00620@astral> Message-ID: <200107262038.WAA32678@thot.banki.hu> Hi, > On Saturday, 21. July 2001 21:28, you wrote: > > Hello Christoph, > > > > Saturday, July 21, 2001, 7:06:32 PM, you wrote: > > > Hi, > > > > > > I have two (broken?) DivX-AVis here which play normally though with a > > > small error (chunksize...) and without index. But if I use -idx or > > > -forceidx to generate an index, they fail to play: Win-DLL fails to load > > > (could not open DLL???) > > > -vc ffdivx and -vc divx4 even crash with a segfault. > > > > > > It does not happend with the first 1 or 10 MB... > > > What is this? > > > > > > gruel > > > ---------------------------------------------------- > > > > [schnipp] > > > > imho this usually happens when important memory areas are overwritten. > Arpi, maybe it's memalloc problem of idx stuff, could you check? (when you > find some free time, besides time to breath) I know, and i already checked it some weeks ago. But didn't find any interesting bug :((( Btw I can't reproduce it :( At least here, once I could at mplayerhq server. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Thu Jul 26 22:50:51 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Thu, 26 Jul 2001 22:50:51 +0200 Subject: [Mplayer-users] Re: ATI Radeon VE In-Reply-To: References: Message-ID: <200107262050.f6QKopG04087@alison.hemmet.chalmers.se> Am Donnerstag, 26. Juli 2001 23:50 schrieben Sie: > Hi! > > My efforts are finished. I've get something workable from XFree86 :( > But I've found a lot of lacks and I don't know where are problems :( > > 1) After applying Suse's XFree86 I could get graphics only on "second head" > It's - ok from windows and linux points but some "old" DOS games which > use VESA (through int10h) can work only with first head so I should replug > monitor every time when I want to use them. Could you test TVout? Is there anything in the Docs about DVI out? > > Now about problems: > MPLAYER: works only -vo xv, x11, sdl:x11 > -dga works but too strange: I've watched in window only horizontal lines > (like I've get overclocked vertical sync but in window :) > -fsdga - not found. Okay, so no DGA. Fine with me, xv is better anyway. > Well: when I watched well famous 405.avi I've get at bottom of picture > several strange green lines (like on nVidia). Also I've found some strange > transparent diagonalled stripes which have green and pink colors. > But it's not problem of unquantize - on S3Virge everythink - ok). > > When I've watched DVD then in places where store is movied (even slowly) > I've get very crumpled pictures with horizontal jaming. (Under WinNT these > problems don't exist). > > AFAIK it would be better to find out solution these problems in Linux's > drivers, but it makes useless any video software under Linux with this > card. That's bad :-( Maybe you should ask the driver's developers about it? The modules should be open source, and SuSE support is not bad, either. Don't give up on them. These are the very first drivers that support the card at all. Maybe you will never see hardware MPEG functions supported in Linux drivers, but still the drivers will get better. And still, if you want to get rid of the card (e.g. swap again ATI XPer at Work..) gruel -- Christoph Lampert, gruel at gmx.de "Linux is a cancer that attaches itself in an intellectual property sense to everything it touches. That's the way that the license works." - Steve Balmer "Epsilon < 0" - chl _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 26 22:46:29 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 26 Jul 2001 22:46:29 +0200 (CEST) Subject: [Mplayer-users] Translations In-Reply-To: <01072523250403.00620@astral> Message-ID: <200107262046.WAA32546@thot.banki.hu> Hi, > > > On Sat, Jul 21, 2001 at 05:35:23PM +0200, Andr? Dahlqvist wrote: > > > > I assume there is work going on to translate mplayer itself to other > > > > languages? I mean, there isn't much point in just having the > > > > documentation in other languages. > > > > It's planned, but I dunno yet how. I hate locale/gettext stuff. > > I think that "help wizard" messages (for example: Did you copied > > codecs.conf to xyz? download codecs pack from ftp:... and install this way: > > ... ) should go to a new file, maybe a .h file defined as constants. > > configure should have an option to choosee language, and use the proper > > language helps.h file. > I also thought about that first, but than I thought having language resources > loadable on the fly would be nicer, so how about having messages marked by an > ID inside a text file and on mplayer start determine language for current > user and load resources from text file into memory into an array of arrays of > chars where index in first dimension of array is identical to id in the > textfile, now just have something mprintf(2) or so, to printout id 2. If I'd > isn't found in locales textfile, load it from english resource, if not found > there show some error and abort mplayer. This sucks. I hate seeing numbers in the source, instead of messages. And keeping them sync with messages... And what about format strings? Allow users to define %p%p%p%p%p as a translation of a string samplerate: %d Hz, %s ? > The tricky part is finding unique ids, so maybe also a tool should be written > which scans sources and checks for next available id (no prob in Perl Fu :). it solves the initial ID problem, but what about the future? don't do that. btw we have the same problem in my commercial project (hotel management system, written in java). we have a function getText(String key), and it reports a string defined by current language file. They are simple files: key=value if key not found in the file, it prints *key*, and logs this to a file. (so key=value pairs can be generated from that file) it's usable, but hard to use, we always forget send text through that function, or send it twice... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 26 22:48:40 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 26 Jul 2001 22:48:40 +0200 (CEST) Subject: [Mplayer-users] new ffmpeg/libavcodec In-Reply-To: <01072600194906.00620@astral> Message-ID: <200107262048.WAA35166@thot.banki.hu> Hi, > On Wednesday, 25. July 2001 18:31, you wrote: > > On Wed, Jul 25, 2001 at 06:06:46PM +0200, Arpi wrote: > > > hmm. > > > slower than libavcodec in mplayer tree, or slower than ffmpeg tree > > > yesterday? > > > > than both .. > aparently the only things done since that are: > - implement macroblock skipping (faster decode of black bars) this one adds some extra code, which makes things a bit slower if no double-skipped macroblocks (no black bars). but it won't make it 2x slower. > - replace emms code at end of functions before #ifdef'ed with emms_c() > funtion which also works with plain c. maybe it's buggy, and do emms soemwhere not really needed. emms is very slow on p1/k6/celeron systems. (maybe it used femms before, which is very fast on k6?) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 26 23:04:22 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 26 Jul 2001 23:04:22 +0200 (CEST) Subject: [Mplayer-users] small changes to MPlayer-20010723 In-Reply-To: <20010726131458.A27978@convergence.de> Message-ID: <200107262104.XAA14722@thot.banki.hu> Hi, > Thus spake Adam Tla/lka (atlka at pg.gda.pl): > > * better detection of local display connection ("unix:" and "localhost:" are > > assumed local and automagically changed to ":" ) > > What is this about? > Why would anyone want to detect a local display connection and then with > a broken method like this (man ssh)? > > Felix I think teh solution is splittting x11 driver to x11 and x11noshm drivers. this way users can force no shm, mayeb usefull for some broken drivers too. same thing should be done for xv. but not before libvo2... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Thu Jul 26 23:23:43 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Thu, 26 Jul 2001 23:23:43 +0200 Subject: [Mplayer-users] Got -subdelay backwards? In-Reply-To: <20010718181135.A31597@telia.com> References: <20010718181135.A31597@telia.com> Message-ID: <20010726232343.A26038@telia.com> Andr? Dahlqvist wrote: > Isn't -subdelay messed up? In a movie the subtitle appeared 4 seconds too > early which of course means I have to increase the delay before the > subtitle is shown. But instead I have to specify -subdelay -4 in mplayer > to have it sync. Have I not had enough sleep, or is this a bug? Can someone answer this question? -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 26 23:19:53 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 26 Jul 2001 23:19:53 +0200 (CEST) Subject: [Mplayer-users] small changes to MPlayer-20010723 In-Reply-To: <20010726144044.A5854@sunrise.pg.gda.pl> Message-ID: <200107262119.XAA25346@thot.banki.hu> Hi, > I corrected my previous patch which now implements: not really corrected :( > * reading subtitles text encoded in utf8 (option -utf8) is done in subreader.c > just while reading the subtitles file (not in generating subtitles function) I liked the previous method (it made sub renderer code cleaner) better! > * changes in sub.c leading to calculating y position only once while > displaying the same subtitle text on the screen i have to understand your changes, seems to be messy for first look. btw the whole sub/osd renderer stuff will be rewritten soon. > * reading fonts files from LIBDIR/font if there is no font dir in ~/.mplayer wasn't it already done by Vladimir's patch? or it was buggy? Atmos, can you check this? (you also said that make some cleanup of DATADIR stuff, by modifying get_path) > * not displaying status while "-q" or "-quiet" option is on - maybe not all > want this but on slower machines we should display only that > what is absolutely needed (film and subtitles in my opinion) it's ok > * better detection of local display connection ("unix:" and "localhost:" are > assumed local and automagically changed to ":"). Maybe it's not quite correct > but I like to use shm while on the same machine. ok. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 26 23:24:13 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 26 Jul 2001 23:24:13 +0200 (CEST) Subject: [Mplayer-users] Some questions... In-Reply-To: <20010726112828.A9976@colby.tjs.org> Message-ID: <200107262124.XAA40776@thot.banki.hu> Hi, > I've been working on an MPlayer HOWTO for a little while, and a couple of things > have come up that would be nice to get answered: > > 1. Just what is libpng used for? did you read docs? -vo png > 2. How would one go about creating RPMs from the source, like has been done with > debian? I'm fairly certain that someone has made RPMs out of MPlayer by now, how > come the RPM control files aren't a part of the MPlayer distribution? I got no such files. If you make _AND_MAINTAIN_ it, i'll put to cvs. (i got one for 0.17a, but it was very obsoleted and buggy) > That's about it for now, stop by http://q3test.2y.net/~moyix/mp-howto/ to see > how it's coming (comments & corrections would be especially appreciated). Right > now it only has sections I-III, but the complete Table of Contents is there, so > you can see what I'm planning on adding. the only think in docs what is always full and finished: the TOC :) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 26 23:20:40 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 26 Jul 2001 23:20:40 +0200 (CEST) Subject: [Mplayer-users] small changes to MPlayer-20010723 In-Reply-To: <20010726162210.A1828@woodstock.localdomain> Message-ID: <200107262120.XAA40858@thot.banki.hu> Hi, > It's the Question that drives us, Adam Tla/lka : > > I corrected my previous patch which now implements: > Methinks you shouldn't create a patch which changes this much stuff. > Then Arpi could reject just some, not all. :) Agree. see prev mail. There are changes i like, and there are i don't like. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Thu Jul 26 23:22:25 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Thu, 26 Jul 2001 23:22:25 +0200 Subject: [Mplayer-users] Some questions... In-Reply-To: <200107262022.f6QKMt503943@alison.hemmet.chalmers.se> References: <20010726112828.A9976@colby.tjs.org> <200107261816.f6QIGw003361@alison.hemmet.chalmers.se> <170137360193.20010726220029@gmx.de> <200107262022.f6QKMt503943@alison.hemmet.chalmers.se> Message-ID: <98142276462.20010726232225@gmx.de> Hello Christoph, Thursday, July 26, 2001, 10:22:54 PM, you wrote: > Am Donnerstag, 26. Juli 2001 22:00 schrieben Sie: >> > Normally, users are even more puzzled what to type and keep asking: "What >> > should I type as password? I have no password! My hotmail password does >> > not work! Help me... *whining noises* " >> >> Quoting http://www.heise.de/newsticker/data/thd-26.07.01-000/: >> MSNs Hotmail hat in diesem Vergleichstest in der Testkategorie >> "Allgemeine Gesch?ftsbedingungen" die schlechtesten Noten bekommen. >> Die Rechtsexperten der Stiftung fanden allein sieben Verst??e gegen >> geltendes deutsches Recht. Im Gesamturteil erhielt Hotmail >> lediglich ein ausreichend ? Kommentar der Warentester: "Nicht >> empfehlenswert". >> >> (Rough translation: Hotmail suxx!) > Yes, I know. That's why I don't use it (instead I have gmx and web.de, which > isn't much better, I guess...) But the whining users have hotmail, you can > bet your grandma on that ;-) yes =)) Btw. gmx and web.de were rated good (ePost also). > gruel -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From falk at lunat23.de Thu Jul 26 23:16:45 2001 From: falk at lunat23.de (Falk Schubert) Date: Thu, 26 Jul 2001 23:16:45 +0200 Subject: [Mplayer-users] libac3 and sse In-Reply-To: <128128228763.20010722222855@gmx.de> References: <20010713211507.7735e9b9.falk@lunat23.de> <0107132137080D.04350@astral> <20010721014838.3070b144.falk@lunat23.de> <170108236876.20010722165543@gmx.de> <20010722213824.4bd97a0b.falk@lunat23.de> <128128228763.20010722222855@gmx.de> Message-ID: <20010726231645.2a838da0.falk@lunat23.de> Well, it's seems like that my processor does not support sse correct....so I will have to compile with --disable-sse, but when I tried this the movies are being played back very slowly....and -bpp 16 and -vo dga don't really speed it up;( Do you have any suggestions on how to play back divx with ac3 and without sse in proper speed? I was told that mplayer should be the best prog for that.... falk -- enjoy your day! Falk Schubert Joellenbeckerstr. 287 33613 Bielefeld _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Thu Jul 26 23:28:26 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Thu, 26 Jul 2001 23:28:26 +0200 Subject: [Mplayer-users] small changes to MPlayer-20010723 In-Reply-To: <200107262119.XAA25346@thot.banki.hu> References: <200107262119.XAA25346@thot.banki.hu> Message-ID: <110142637061.20010726232826@gmx.de> Hello Arpi, Thursday, July 26, 2001, 11:19:53 PM, you wrote: > Hi, [snip] >> * reading fonts files from LIBDIR/font if there is no font dir in ~/.mplayer > wasn't it already done by Vladimir's patch? or it was buggy? > Atmos, can you check this? > (you also said that make some cleanup of DATADIR stuff, by modifying > get_path) yes, I finished function yaesterday/today night but didn't apply it yet to mplayer. And it was so hot nice day today that I went swimming =))) [snip] > A'rpi / Astral & ESP-team -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kukocs at programozo.hu Thu Jul 26 23:37:36 2001 From: kukocs at programozo.hu (Kukocs) Date: Thu, 26 Jul 2001 23:37:36 +0200 (CEST) Subject: [Mplayer-users] video card(s)? Message-ID: Hi all! I have an s3 virge video card nowtimes, but i think it's time to buy a new one :) I was looking for an nvidia tnt2, or a cheaper geforce, but i've heard, that the nvidia's linux drivers are a shit. What other cards are possible to use with linux and MOSTLY with mplayer?? I know, there are 3dfx based cards, but i've heard they are not good, too, and ati cards, but they are too expensive, i think A'rpi, -and others- what _cheap_ (== under 60 usd /20.000 huf) cards do you offer with linux? I'm only using with xfree(3.6 now), but i will use with mplayer MOSTLY, and games in linux, if possible. ms games doesn't matter, i like software rendering, and i play only sometimes. i can buy an s3 savage4, i've heard it's not a good card for playing, but is it useable under linux / i mean, i know it works, but there is hardware acc. xfree 4.x driver, mplayer works fine, in full screen, etc./ Thx all Your help: Kukocs _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Thu Jul 26 23:41:11 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Thu, 26 Jul 2001 23:41:11 +0200 Subject: [Mplayer-users] Got -subdelay backwards? In-Reply-To: <20010726232343.A26038@telia.com>; from andre.dahlqvist@telia.com on Thu, Jul 26, 2001 at 11:23:43PM +0200 References: <20010718181135.A31597@telia.com> <20010726232343.A26038@telia.com> Message-ID: <20010726234111.A4545@woodstock.localdomain> It's the Question that drives us, Andr? Dahlqvist : > > to have it sync. Have I not had enough sleep, or is this a bug? > Can someone answer this question? The World is cruel... -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From arpi at thot.banki.hu Thu Jul 26 23:41:05 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 26 Jul 2001 23:41:05 +0200 (CEST) Subject: [Mplayer-users] Got -subdelay backwards? In-Reply-To: <20010726232343.A26038@telia.com> Message-ID: <200107262141.XAA28770@thot.banki.hu> Hi, > Andr? Dahlqvist wrote: > > > Isn't -subdelay messed up? In a movie the subtitle appeared 4 seconds too > > early which of course means I have to increase the delay before the > > subtitle is shown. But instead I have to specify -subdelay -4 in mplayer > > to have it sync. Have I not had enough sleep, or is this a bug? > > Can someone answer this question? Yes. But what's the answer? I think it's ok. It's simply philosophy, or relativity theory. subtitle compared to video, or video compared to subtitle? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 26 23:48:54 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 26 Jul 2001 23:48:54 +0200 (CEST) Subject: [Mplayer-users] video card(s)? In-Reply-To: Message-ID: <200107262148.XAA34180@thot.banki.hu> Hi, > A'rpi, -and others- what _cheap_ (== under 60 usd /20.000 huf) cards do > you offer with linux? Matrox G450 (if <20eHuf, you can buy g450 16MB DDR) Or even cheaper: Ati Xpert at 98, it's about 8e Huf here. (and it has good OpenGL (relatiev to price... don't compare to Geforce GTS) with Utah-GLX, and has good Xv drivers too) > I'm only using with xfree(3.6 now), but i will use with mplayer MOSTLY, > and games in linux, if possible. ms games doesn't matter, i like > software rendering, and i play only sometimes. I perfer matrox, because it has lowlevel linxu driver (mga_vid.o) which works without X 4.0 (other cards need X 4.0 for Xv support). And in image quality, matrox wins every tests. > i can buy an s3 savage4, i've heard it's not a good card for playing, > but is it useable under linux / i mean, i know it works, but there is > hardware acc. xfree 4.x driver, mplayer works fine, in full screen, > etc./ S3 sux. don't buy it. I've never seen working, fast drivers for S3 cards (Trio3D/2x AGP, and Savage4) If you're mostly use linux, you should choose betwee ati, matrox and 3dfx cards. They have good (more-or-less, but much better than other cards like S3 or Trident) linux drivers. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Thu Jul 26 23:52:27 2001 From: arpi at thot.banki.hu (Arpi) Date: Thu, 26 Jul 2001 23:52:27 +0200 (CEST) Subject: [Mplayer-users] list traffic Message-ID: <200107262152.XAA27740@thot.banki.hu> Hi, mplayer-users gets high traffic nowdays... i've seen many unsubscribe requests this week :( some suggestions: - move coding topics to mplayer-dev-eng (like message translations etc) - stop the flame and offtopics topics - don't send one-line IRC-style messages just for fun. at least not too many... thanks! A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Thu Jul 26 23:56:39 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Thu, 26 Jul 2001 23:56:39 +0200 Subject: [Mplayer-users] Got -subdelay backwards? In-Reply-To: <200107262141.XAA28770@thot.banki.hu> References: <200107262141.XAA28770@thot.banki.hu> Message-ID: <20010726235639.A26383@telia.com> Arpi wrote: > Yes. But what's the answer? > I think it's ok. It's simply philosophy, or relativity theory. > subtitle compared to video, or video compared to subtitle? The option is -subdelay, which to me means "how much to delay the subtitle". It doesn't seam logical to interpret -subdelay as "how much to delay the video". But maybe that's just me. -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From mgraffam at idsi.net Thu Jul 26 23:59:26 2001 From: mgraffam at idsi.net (mgraffam at idsi.net) Date: Thu, 26 Jul 2001 17:59:26 -0400 (EDT) Subject: [Mplayer-users] video card(s)? In-Reply-To: Message-ID: On Thu, 26 Jul 2001, Kukocs wrote: > Hi all! > > I have an s3 virge video card nowtimes, but i think it's time to buy a > new one :) I have an S3 Virge/DX card. Xv acceleration works on it, and it works with Mplayer just fine :) > i can buy an s3 savage4, i've heard it's not a good card for playing, > but is it useable under linux / i mean, i know it works, but there is > hardware acc. xfree 4.x driver, mplayer works fine, in full screen, > etc./ I have an ATI Rage 128 card and a Savage 4 based card. I'd recommend the R128. Sure, it is a little expensive, but I've seen them selling for around $70 USD, so that isn't much above your price range. The R128 has hardware 3D, framebuffer support, and excellent Xv scaling. The Savage4 has no support for 3D acceleration, and no frame buffer support, and in my experience it pulls a bit more CPU load when doing Xv rendering. -- Michael Graffam (mgraffam at idsi.net) The importance of a suburban struggle has usually been underestimated; it is really very great. - Che Guevara (Guerilla Warfare, "Suburban Warfare") _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kukocs at programozo.hu Fri Jul 27 00:09:18 2001 From: kukocs at programozo.hu (Kukocs) Date: Fri, 27 Jul 2001 00:09:18 +0200 (CEST) Subject: [Mplayer-users] Re: Files don't play with -idx In-Reply-To: Message-ID: Jul 25-?n, 20:39-kor Mplayer-users digest, Vol 1 #280 - 12 msgs t?m?j?...: Subject: Re: [Mplayer-users] Files don't play with -idx, but without :> > I have two (broken?) DivX-AVis here which play normally though with a :> > small error (chunksize...) and without index. But if I use -idx or :> > -forceidx to generate an index, they fail to play: Win-DLL fails to load :> > (could not open DLL???) :> > -vc ffdivx and -vc divx4 even crash with a segfault. I've the same prob! my avi works, but there is no index( i can't seek), and with option -idx, or with -forceidx do the same : here is the error msg (most of it) Detected AVI file format! ==> Found video stream: 0 ==> Found audio stream: 1 WARNING!!! chunksize=-16777216 (id=) AVI: Generated index table for 0 chunks! VIDEO: [DIV3] 320x240 24bpp 25.00 fps 968.9 kbps (118.3 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:320x240 fps:25.00 ftime:=0.0400 Detected audio codec: [mp3] drv:1 (MPEG layer-2, layer-3) dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer Detected video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) vo: X11 running at 800x600 depth: 24 (":0.0" => local display) Loading DLL: /usr/lib/win32/divx_c32.ax FAILED! ERROR: Couldn't open required DirectShow codec: divx_c32.ax Maybe you forget to upgrade your win32 codecs?? It's time to download the new package from: ftp://thot.banki.hu/esp-team/linux/MPlayer/w32codec.zip ! Or you should disable DShow support: make distclean;make -f Makefile.No-DS Shoud I send a full -?bug?- report, etc? does it help for U? Hi: Kukocs _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 27 00:31:27 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 27 Jul 2001 00:31:27 +0200 (CEST) Subject: [Mplayer-users] segfault In-Reply-To: Message-ID: <200107262231.AAA55212@thot.banki.hu> Hi, > i got a segfault. > file is 'Ann Lee - 2 Times.asf', > bug report is 'Ann Lee - 2 Times.asf.bugreport'. > I've checked the file. really does segfaults. after some debugging, i've found that it crashes in the DLL, at decoding first audio frame of the file. Btw it's 32 kbit/s stream, unusual low bitrate for audio... I can't fix it, just played a bit with DLL parameters but didn't help. Is it playable under windows, or with avifile? (I think no, or we have a bug in the DLL loader?) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kukocs at programozo.hu Fri Jul 27 00:09:18 2001 From: kukocs at programozo.hu (Kukocs) Date: Fri, 27 Jul 2001 00:09:18 +0200 (CEST) Subject: [Mplayer-users] Re: Files don't play with -idx In-Reply-To: Message-ID: Jul 25-?n, 20:39-kor Mplayer-users digest, Vol 1 #280 - 12 msgs t?m?j?...: Subject: Re: [Mplayer-users] Files don't play with -idx, but without :> > I have two (broken?) DivX-AVis here which play normally though with a :> > small error (chunksize...) and without index. But if I use -idx or :> > -forceidx to generate an index, they fail to play: Win-DLL fails to load :> > (could not open DLL???) :> > -vc ffdivx and -vc divx4 even crash with a segfault. I've the same prob! my avi works, but there is no index( i can't seek), and with option -idx, or with -forceidx do the same : here is the error msg (most of it) Detected AVI file format! ==> Found video stream: 0 ==> Found audio stream: 1 WARNING!!! chunksize=-16777216 (id=) AVI: Generated index table for 0 chunks! VIDEO: [DIV3] 320x240 24bpp 25.00 fps 968.9 kbps (118.3 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:320x240 fps:25.00 ftime:=0.0400 Detected audio codec: [mp3] drv:1 (MPEG layer-2, layer-3) dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer Detected video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) vo: X11 running at 800x600 depth: 24 (":0.0" => local display) Loading DLL: /usr/lib/win32/divx_c32.ax FAILED! ERROR: Couldn't open required DirectShow codec: divx_c32.ax Maybe you forget to upgrade your win32 codecs?? It's time to download the new package from: ftp://thot.banki.hu/esp-team/linux/MPlayer/w32codec.zip ! Or you should disable DShow support: make distclean;make -f Makefile.No-DS Shoud I send a full -?bug?- report, etc? does it help for U? Hi: Kukocs _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From R.Dubitzky at physik.tu-dresden.de Fri Jul 27 01:06:07 2001 From: R.Dubitzky at physik.tu-dresden.de (Rolf Dubitzky) Date: Fri, 27 Jul 2001 01:06:07 +0200 (MEST) Subject: [Mplayer-users] Re: Files don't play with -idx In-Reply-To: Message-ID: On Fri, 27 Jul 2001, Kukocs wrote: > Jul 25-?n, 20:39-kor Mplayer-users digest, Vol 1 #280 - 12 msgs t?m?j?...: > :> > -forceidx to generate an index, they fail to play: Win-DLL fails to load > :> > (could not open DLL???) > I've the same prob! my avi works, but there is no index( i can't seek), > and with option -idx, or with -forceidx do the same : I reported this Mon, 4 Jun 2001, but got no answer. The problem (back then with IdegCounter, today with latest CVS) is still persistent for me. http://www.geocrawler.com/archives/3/10464/2001/6/600/5891842/ Cheers, Rolf _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 27 03:20:32 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 27 Jul 2001 03:20:32 +0200 (CEST) Subject: [Mplayer-users] Re: Files don't play with -idx In-Reply-To: Message-ID: <200107270120.DAA55146@thot.banki.hu> Hi, > > Jul 25-?n, 20:39-kor Mplayer-users digest, Vol 1 #280 - 12 msgs t?m?j?...: > > :> > -forceidx to generate an index, they fail to play: Win-DLL fails to load > > :> > (could not open DLL???) > > > I've the same prob! my avi works, but there is no index( i can't seek), > > and with option -idx, or with -forceidx do the same : > > I reported this Mon, 4 Jun 2001, but got no answer. The problem (back > then with IdegCounter, today with latest CVS) is still persistent for me. > http://www.geocrawler.com/archives/3/10464/2001/6/600/5891842/ Yes, I know. And many other people reporetd it too, but I couldn't find it yet. But just commited some changes, please try again. (I can't try, isn't reproducable here) Fixed possible problems: 1. missing demuxer->idx_size=0; isn't really required, but who knows... 2. handle case of bad IDs: if(!id || avi_stream_id(id)==100) goto skip_chunk; // bad ID (or padding?) usefull only for broken files. 3. incremented memory unit size 16->1024, it means less memory (re)allocation. mayeb your glibc can't handle 10^6 malloc calls, so it run out of heap memory (or internal tables) -> can't load DLL maybe this bug depend on amount of free memory? If still not ok, please check and tell me this line: AVI: Generated index table for 3289 chunks! if you see a big number (for example, 12345678) then it's a (semi)infinite loop problem... occurs with some broken files for me. If you see a normal value there (<4*frames) but not works, tell me! (including mplayer -v log) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Fri Jul 27 07:33:43 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Fri, 27 Jul 2001 08:33:43 +0300 (EEST) Subject: [Mplayer-users] Got -subdelay backwards? In-Reply-To: <200107262141.XAA28770@thot.banki.hu> Message-ID: > I think it's ok. It's simply philosophy, or relativity theory. > subtitle compared to video, or video compared to subtitle? ah, the relativity! but i've found that z/x act in the same way, but when i use them, it is the subtitles that jump back and forth, not the video. so it would make more sense to swap them (negate subdelay), or make the video jump instead of them :) anyway that's only a minor annoyance that has to be kept in mind when encountering unsynched subs :) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Fri Jul 27 07:38:49 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Fri, 27 Jul 2001 08:38:49 +0300 (EEST) Subject: [Mplayer-users] segfault In-Reply-To: <200107262231.AAA55212@thot.banki.hu> Message-ID: > I can't fix it, just played a bit with DLL parameters but didn't help. > Is it playable under windows, or with avifile? > (I think no, or we have a bug in the DLL loader?) it IS playable with avifile. sorry i forgot to mention in the original post. wouldn't have posted if it wasn't anyway :) haven't tried it in windoze though, the only windoze i have available is with vmware (thus everything multimedia-related is either too old or missing at all - no reason to update vmwarized multimedia sw :) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 27 08:46:34 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Fri, 27 Jul 2001 08:46:34 +0200 Subject: [Mplayer-users] small changes to MPlayer-20010723 In-Reply-To: <200107262104.XAA14722@thot.banki.hu> References: <200107262104.XAA14722@thot.banki.hu> Message-ID: <0107270846340C.00620@astral> On Thursday, 26. July 2001 23:04, you wrote: > Hi, > > > Thus spake Adam Tla/lka (atlka at pg.gda.pl): > > > * better detection of local display connection ("unix:" and > > > "localhost:" are assumed local and automagically changed to ":" ) > > > > What is this about? > > Why would anyone want to detect a local display connection and then with > > a broken method like this (man ssh)? > > > > Felix > > I think teh solution is splittting x11 driver to x11 and x11noshm drivers. imho this creates redundant code, how about -shm/-noshm commandlineoption? > > this way users can force no shm, mayeb usefull for some broken drivers too. > same thing should be done for xv. > > but not before libvo2... > > A'rpi / Astral & ESP-team > -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 27 08:44:41 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Fri, 27 Jul 2001 08:44:41 +0200 Subject: [Mplayer-users] Problems using mp.pl In-Reply-To: <20010726124439.A2381@telia.com> References: <20010724145605.A13482@telia.com> <01072601141509.00620@astral> <20010726124439.A2381@telia.com> Message-ID: <0107270844410B.00620@astral> On Thursday, 26. July 2001 12:44, you wrote: > Felix Buenemann wrote: > > please try mplayer -ss 01:18:00 > > /home/andre/incoming/almost.famous.cd2.dvdrip.divx-dominion.avi and check > > if you get the above error. > > Nope, that works fine. But maybe Arpi is right when he suspects a buggy > audio driver? Could be cause I can't think of any relation between the perl script and such error. -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atlka at pg.gda.pl Fri Jul 27 09:35:03 2001 From: atlka at pg.gda.pl (Adam Tla/lka) Date: Fri, 27 Jul 2001 09:35:03 +0200 Subject: [Mplayer-users] changes to MPlayer - how to split my diff In-Reply-To: ; from mplayer-users-request@lists.sourceforge.net on Thu, Jul 26, 2001 at 03:01:02PM -0700 References: Message-ID: <20010727093502.B5854@sunrise.pg.gda.pl> Hello, so if we wont test only some aspects of this patch we can split the file at positions where line starts from "diff" string. We get diffs to: 1)cfg-mplayer.h - added options "utf8", "noutf8", "q" , "quiet" 2)mplayer.c - added loading of "font.desc" DATADIR/font if not load from ~/mplayer/font added usage of "quiet" option 3)subreader.c - moved sub_unicode and sub_utf8 variables here added function generateints(subtitle *) which generate text of a subtitle as an array of ints with length as 1st element and decode unicode and utf8 reprezentation modified sub_read_file() function to use generateints() 4)libvo/sub.c - optimization of vo_draw* functions and modification to use array of ints (representing font positions) generated while loading subtitle file in 3) 5)libvo/font_load.c - added checking of "~/.mplayer/font" and if not found loading font from DATADIR/font 6)libvo/x11_common.c - added checking of "unix:" or "localhost:" value of DISPLAY and then changeing it to ":" in order to use shared memory Now the dependencies between files: 2) uses "quiet" opion added in 1) 3) and 4) must be applied together and they uses "utf8" option added in 1) 5) and 6) are quite independent from all Regards -- . . Adam Tla/lka mailto:atlka at pg.gda.pl ^v^ ^v^ ^v^ - Computer Center, Technical University of Gdansk, Poland PGP public key: finger atlka at sunrise.pg.gda.pl _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 27 09:53:28 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 27 Jul 2001 09:53:28 +0200 (CEST) Subject: [Mplayer-users] segfault In-Reply-To: Message-ID: <200107270753.JAA18078@thot.banki.hu> Hi, > > I can't fix it, just played a bit with DLL parameters but didn't help. > > Is it playable under windows, or with avifile? > > (I think no, or we have a bug in the DLL loader?) > > it IS playable with avifile. sorry i forgot to mention in the original post. Which avifile? I've tried, but aviplay crashed with segfault too. (0.6 cvs, about a month old. i'll try latest soon) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Fri Jul 27 10:22:35 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Fri, 27 Jul 2001 11:22:35 +0300 (EEST) Subject: [Mplayer-users] segfault In-Reply-To: <200107270753.JAA18078@thot.banki.hu> Message-ID: On Fri, 27 Jul 2001, Arpi wrote: > > it IS playable with avifile. sorry i forgot to mention in the original post. > Which avifile? > > I've tried, but aviplay crashed with segfault too. > (0.6 cvs, about a month old. i'll try latest soon) mine is older - 0.53 _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 27 10:49:10 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Fri, 27 Jul 2001 10:49:10 +0200 Subject: [Mplayer-users] segfault In-Reply-To: References: Message-ID: <0107271049100D.00620@astral> On Friday, 27. July 2001 10:22, you wrote: > On Fri, 27 Jul 2001, Arpi wrote: > > > it IS playable with avifile. sorry i forgot to mention in the original > > > post. > > > > Which avifile? > > > > I've tried, but aviplay crashed with segfault too. > > (0.6 cvs, about a month old. i'll try latest soon) > > mine is older - 0.53 Then please could you try it with MPlayer 0.17a IdegCounter, too? -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From as at sci.fi Fri Jul 27 12:08:53 2001 From: as at sci.fi (Anssi Saari) Date: Fri, 27 Jul 2001 13:08:53 +0300 Subject: [Mplayer-users] Re: segfault In-Reply-To: <0107271049100D.00620@astral>; from atmosfear@users.sourceforge.net on Fri, Jul 27, 2001 at 10:49:10AM +0200 References: <0107271049100D.00620@astral> Message-ID: <20010727130853.A28443@sci.fi> On Fri, Jul 27, 2001 at 10:49:10AM +0200, Felix Buenemann wrote: > On Friday, 27. July 2001 10:22, you wrote: > > On Fri, 27 Jul 2001, Arpi wrote: > > > > it IS playable with avifile. sorry i forgot to mention in the original > > > > post. > > > > > > Which avifile? > > > > > > I've tried, but aviplay crashed with segfault too. > > > (0.6 cvs, about a month old. i'll try latest soon) > > > > mine is older - 0.53 > Then please could you try it with MPlayer 0.17a IdegCounter, too? I did and IdegCounter works. Also works with my ancient aviplay 0.48 but not avifile-0.6.0.20010719. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From cyrax at nerd.dk Fri Jul 27 12:24:13 2001 From: cyrax at nerd.dk (Mark =?ISO-8859-1?Q?Gj=F8l?=) Date: Fri, 27 Jul 2001 12:24:13 +0200 Subject: [Mplayer-users] video card(s)? References: Message-ID: <3B61414D.7010900@nerd.dk> Kukocs wrote: >Hi all! > >I have an s3 virge video card nowtimes, but i think it's time to buy a >new one :) >I was looking for an nvidia tnt2, or a cheaper geforce, but i've heard, >that the nvidia's linux drivers are a shit. > I use a GeForce2MX with nvidia's drivers and it works incredibly fine. Now... I don't know how fast the matrox-cards run, but for me, this is fast enough! (actually a little too fast since the OpenGL screensavers doesn't have a limit for how fast they run ;) I have an Athlon 750 which may take some of the credit, but still... I use about 10% cpu when I watch a movie with xv output (Or that's what gkrellm tells me... Not sure how precise it is). Anyway. As far as I'm concerned the drivers for nvidia-based gfx-cards are adequate. \\ Mark Gj?l _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jk at tools.de Fri Jul 27 12:40:25 2001 From: jk at tools.de (Juergen Keil) Date: Fri, 27 Jul 2001 12:40:25 +0200 (MEST) Subject: [Mplayer-users] segfault Message-ID: <200107271040.f6RAeO306885@leo.tools.intra> > > i got a segfault. > > file is 'Ann Lee - 2 Times.asf', > > bug report is 'Ann Lee - 2 Times.asf.bugreport'. > > > > I've checked the file. really does segfaults. > after some debugging, i've found that it crashes in the DLL, > at decoding first audio frame of the file. Does *not* crash here: ... Detected audio codec: [divx] drv:4 (DivX audio (WMA)) Initializing audio codec... ======= Win32 (ACM) AUDIO Codec init ======= Loading DLL: /usr/lib/win32/divxa32.acm OK Audio codec opened OK! ;-) Audio ACM output buffer min. size: 16384 Audio ACM input buffer min. size: 372 dec_audio: Allocating 16384 + 65536 = 81920 bytes for output buffer acm converted 186 -> 0 AUDIO: srate=44100 chans=2 bps=2 sfmt=0x10 ratio: 4005->176400 ... Maybe I've a different (old?) version of the win32 dlls (divxa32.acm, for audio format 0x160) installed? % ls -l /usr/lib/win32/divxa32.acm -rw-r--r-- 1 root other 291408 Feb 20 16:52 /usr/lib/win32/divxa32.acm % gmd5sum /usr/lib/win32/divxa32.acm d81c9254f3ec20ffcc55d30c93480fc8 /usr/lib/win32/divxa32.acm (Lets check, ... downloading w32codec-0.18.zip...) Nope. w32codec-0.18.zip contains a different version, but still no crash. % ls -l /usr/lib/win32/divxa32.acm -rw-r--r-- 1 root other 287744 Dec 29 2000 /usr/lib/win32/divxa32.acm % gmd5sum /usr/lib/win32/divxa32.acm 8b32d7f2c98e4ce24ca678551ee3f780 /usr/lib/win32/divxa32.acm -- J?rgen Keil jk at tools.de Tools GmbH +49 (228) 9858011 _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 27 13:01:04 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 27 Jul 2001 13:01:04 +0200 (CEST) Subject: [Mplayer-users] segfault In-Reply-To: <200107271040.f6RAeO306885@leo.tools.intra> Message-ID: <200107271101.NAA19392@thot.banki.hu> Hi, > > > i got a segfault. > > > file is 'Ann Lee - 2 Times.asf', > > > bug report is 'Ann Lee - 2 Times.asf.bugreport'. > > > > > > > I've checked the file. really does segfaults. > > after some debugging, i've found that it crashes in the DLL, > > at decoding first audio frame of the file. > > Does *not* crash here: under linux or solaris or bsd? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 27 13:13:59 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Fri, 27 Jul 2001 13:13:59 +0200 Subject: [Mplayer-users] libac3 and sse In-Reply-To: <20010726231645.2a838da0.falk@lunat23.de> References: <20010713211507.7735e9b9.falk@lunat23.de> <0107132137080D.04350@astral> <20010721014838.3070b144.falk@lunat23.de> <170108236876.20010722165543@gmx.de> <20010722213824.4bd97a0b.falk@lunat23.de> <128128228763.20010722222855@gmx.de> <20010726231645.2a838da0.falk@lunat23.de> Message-ID: <4519414837.20010727131359@gmx.de> Hello Falk, Thursday, July 26, 2001, 11:16:45 PM, you wrote: > Well, > it's seems like that my processor does not support sse correct....so I > will have to compile with --disable-sse, but when I tried this the movies > are being played back very slowly....and -bpp 16 and -vo dga don't really > speed it up;( > Do you have any suggestions on how to play back divx with ac3 and without > sse in proper speed? I was told that mplayer should be the best prog for > that.... Coukd you please tell, what type of CPU you have? (detetion by kernel doesn't clearly show that) I mean do you have Pentium III, Celeron II, ... > falk -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 27 13:20:50 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Fri, 27 Jul 2001 13:20:50 +0200 Subject: [Mplayer-users] segfault In-Reply-To: <200107271101.NAA19392@thot.banki.hu> References: <200107271101.NAA19392@thot.banki.hu> Message-ID: <11419826579.20010727132050@gmx.de> Hello Arpi, Friday, July 27, 2001, 1:01:04 PM, you wrote: > Hi, >> > > i got a segfault. >> > > file is 'Ann Lee - 2 Times.asf', >> > > bug report is 'Ann Lee - 2 Times.asf.bugreport'. >> > > >> > >> > I've checked the file. really does segfaults. >> > after some debugging, i've found that it crashes in the DLL, >> > at decoding first audio frame of the file. >> >> Does *not* crash here: > under linux or solaris or bsd? maybe it has something to do with the changes H?rgen did to the win32 code, that's why I suggested trying with 0.17a. > A'rpi / Astral & ESP-team -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Fri Jul 27 14:26:06 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Fri, 27 Jul 2001 15:26:06 +0300 (EEST) Subject: [Mplayer-users] segfault In-Reply-To: <0107271049100D.00620@astral> Message-ID: > > > > it IS playable with avifile. sorry i forgot to mention in the original > > > > post. > > > > > > Which avifile? > > > > > > I've tried, but aviplay crashed with segfault too. > > > (0.6 cvs, about a month old. i'll try latest soon) > > > > mine is older - 0.53 > Then please could you try it with MPlayer 0.17a IdegCounter, too? plays fine. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Fri Jul 27 14:49:55 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Fri, 27 Jul 2001 15:49:55 +0300 (EEST) Subject: [Mplayer-users] subtitles special sequences? Message-ID: i've encountered special sequences in some subtitle files, like {Y:i} (seems like a clue to render italics). it seems it will be quite better if such sequences are filtered out, until (if at all) they are supported. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jk at tools.de Fri Jul 27 15:10:21 2001 From: jk at tools.de (Juergen Keil) Date: Fri, 27 Jul 2001 15:10:21 +0200 (MEST) Subject: [Mplayer-users] segfault Message-ID: <200107271310.f6RDAK320305@leo.tools.intra> > > Does *not* crash here: > > under linux or solaris or bsd? I've tested it both on solaris 8 x86 and suse linux 7.2 (2.4.4-4GB kernel). On both systems, divxa32.acm loads without segfault. The solaris box uses gcc version 2.95.2 19991024 (release), the suse linux box gcc version 2.95.3 20010315 (SuSE). -- J?rgen Keil jk at tools.de Tools GmbH +49 (228) 9858011 _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From vishnu at pobox.com Fri Jul 27 15:53:11 2001 From: vishnu at pobox.com (Joshua N Pritikin) Date: Fri, 27 Jul 2001 19:23:11 +0530 Subject: [Mplayer-users] Tooooo slow [RESEND] Message-ID: <20010727192311.E578@ns.durga.edu.in> My hardware is too slow to play DVD. Here's what i've got: K6-III 450MHz 128MB RAM Asus P5A-B motherboard SiS 6326 AGP w/ 8MB XFree86 4.0.3 Even when i use `-vo null -framedrop', the video-audio skew climbs to about 10 seconds and then blows up with a buffer overflow. The SiS video card has hardware support for DVD but linux drivers don't exist. It doesn't even have XVideo support. When i had similar hardware in a VIA motherboard, i was able to play DVD through `-vo fbdev' with about 50% dropped frames. Any suggestions?? -- Get self-realization at ... ? Victory to the Divine Mother!! _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 27 16:01:55 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 27 Jul 2001 16:01:55 +0200 (CEST) Subject: [Mplayer-users] segfault In-Reply-To: <11419826579.20010727132050@gmx.de> Message-ID: <200107271401.QAA32050@thot.banki.hu> Hi, > >> Does *not* crash here: > > under linux or solaris or bsd? > maybe it has something to do with the changes H?rgen did to the win32 > code, that's why I suggested trying with 0.17a. Maybe... but i think my avifile 0.6 is too old, it doesn't contain those changes. btw there is another strange codec, teh ima-adpcm. it works for Gabucino, but fails for me. we have exactly the same DLL file. (and the same mplayer version...) maybe these depends on other memory usage stuff. just like l3codeca, which fails if openwall security patch changes memory layout. other possible reason is the method of calling audio codecs. i've changed it when new audio stuff has been finished (libao2...) do someone has a good doc about ACM API? it's a big buggy shit, at least I couldn't find how it really works. i have to pass how many bytes should be decoded to how many bytes, but 1. it doesn't matter, sometimes it reads more and/or write more (or less) 2. the function for ratio calculation (how many bytes required for decompressing x bytes data) fails for some codecs, especially for divx audio. avifile does similar mess with this. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 27 16:05:47 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 27 Jul 2001 16:05:47 +0200 (CEST) Subject: [Mplayer-users] Tooooo slow [RESEND] In-Reply-To: <20010727192311.E578@ns.durga.edu.in> Message-ID: <200107271405.QAA20978@thot.banki.hu> Hi, > My hardware is too slow to play DVD. Here's what i've got: Agree :) > K6-III 450MHz > 128MB RAM > Asus P5A-B motherboard > SiS 6326 AGP w/ 8MB > XFree86 4.0.3 isn't enough... > Even when i use `-vo null -framedrop', the video-audio skew climbs to about > 10 seconds and then blows up with a buffer overflow. The SiS video card > has hardware support for DVD but linux drivers don't exist. It doesn't > even have XVideo support. When i had similar hardware in a VIA motherboard, > i was able to play DVD through `-vo fbdev' with about 50% dropped frames. > > Any suggestions?? swap videocard... (card without good drivers is even worse than nothing - you spend money for some unusable shit while nothing is free :)) maybe if you are a coder, try to get sis_vid working (from drivers/ dir). it supports (in theory) sis 6326 similar to mga_vid, but i never tried. (and mga_vid interface changed a lot while sis driver wasn't updated) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From falk at lunat23.de Fri Jul 27 16:33:18 2001 From: falk at lunat23.de (Falk Schubert) Date: Fri, 27 Jul 2001 16:33:18 +0200 Subject: [Mplayer-users] libac3 and sse In-Reply-To: <4519414837.20010727131359@gmx.de> References: <20010713211507.7735e9b9.falk@lunat23.de> <0107132137080D.04350@astral> <20010721014838.3070b144.falk@lunat23.de> <170108236876.20010722165543@gmx.de> <20010722213824.4bd97a0b.falk@lunat23.de> <128128228763.20010722222855@gmx.de> <20010726231645.2a838da0.falk@lunat23.de> <4519414837.20010727131359@gmx.de> Message-ID: <20010727163318.08df0a73.falk@lunat23.de> > I mean do you have Pentium III, Celeron II, ... I have a Mobile Celeron 700Mhz...it's in a Dell Inspirion 4000 with 128MB RAM... I think that divx with ac3 should be watchable quit fluent with this maschine or do think the hardware might be the delimiting factor for the slow video output? -- enjoy your day! Falk Schubert Joellenbeckerstr. 287 33613 Bielefeld _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 27 15:52:54 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 27 Jul 2001 15:52:54 +0200 (CEST) Subject: [Mplayer-users] segfault In-Reply-To: <200107271310.f6RDAK320305@leo.tools.intra> Message-ID: <200107271352.PAA46204@thot.banki.hu> Hi, > > > Does *not* crash here: > > > > under linux or solaris or bsd? > > I've tested it both on solaris 8 x86 and suse linux 7.2 (2.4.4-4GB kernel). > On both systems, divxa32.acm loads without segfault. It loads for me too, but it crash when calling decoding function! A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 27 16:55:38 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 27 Jul 2001 16:55:38 +0200 (CEST) Subject: [Mplayer-users] libac3 and sse In-Reply-To: <20010727163318.08df0a73.falk@lunat23.de> Message-ID: <200107271455.QAA19420@thot.banki.hu> Hi, > > I mean do you have Pentium III, Celeron II, ... > > I have a Mobile Celeron 700Mhz...it's in a Dell Inspirion 4000 with 128MB > RAM... > > I think that divx with ac3 should be watchable quit fluent with this > maschine or do think the hardware might be the delimiting factor for the > slow video output? yes. vga card _AND_DRIVER_ does matter a lot! for example, with a k6-2 450 + matrox G400 + mga_vid driver it plays DVD without framedrop... but my P3-733 at work can't do that with S3 trio3D AGP! (but do that with old Tseng ET6000 PCI :)) and also memory bandwith matters (normal celeron has 66Mhz FSB). cpu isn't so important, because most time of decoding is spent by memory read/write waiting. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 27 17:40:35 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Fri, 27 Jul 2001 17:40:35 +0200 Subject: [Mplayer-users] libac3 and sse In-Reply-To: <20010727163318.08df0a73.falk@lunat23.de> References: <20010713211507.7735e9b9.falk@lunat23.de> <0107132137080D.04350@astral> <20010721014838.3070b144.falk@lunat23.de> <170108236876.20010722165543@gmx.de> <20010722213824.4bd97a0b.falk@lunat23.de> <128128228763.20010722222855@gmx.de> <20010726231645.2a838da0.falk@lunat23.de> <4519414837.20010727131359@gmx.de> <20010727163318.08df0a73.falk@lunat23.de> Message-ID: <16135411018.20010727174035@gmx.de> Hello Falk, Friday, July 27, 2001, 4:33:18 PM, you wrote: >> I mean do you have Pentium III, Celeron II, ... > I have a Mobile Celeron 700Mhz...it's in a Dell Inspirion 4000 with 128MB > RAM... it does support SSE extensions so it might be problem of your kernel, if you get yourself a recent gdb version we can debug it. > I think that divx with ac3 should be watchable quit fluent with this > maschine or do think the hardware might be the delimiting factor for the > slow video output? there are many point that limit spped, but having no sse optimiztazions at all has quite some impact, another one is the need for a fast graphics adapter with good drivers, which is very important. Which graphics chip do you have? I know that my PIII 850 Notebook with S3 Savage MX/8MB I use for decoding is very heavily loaded when decoding dvd and only manages it fast enough when using XVideo acceleration (or maybe dga out with limited bandwidth, through -bpp 16). So although much of the needed power goes to graphics card/driver here (when benchmarking I have 30% cpu load even with XVideo Extension, maybe due to bad drivers and it much more with x11 out). You should use the -benchmark -nosound option to see how much cpu time is spend to the system outside of mplayer, here's a nice example: Playing on my server PIII 500, 512KB L2 @250MHz, 256MB RAM, Matrox G400 AGP 32MB: needs ~44.8seconds to playback my 2:30 divx test trailer (640x272, ~1200kbps) using -vo mga, systime here is ~0.4seconds. Compared with my notebook PIII 850, 256KB L2 @850MHz, 128MB RAM, Savage MX 8MB AGP: needs ~49.5seconds for the same clip using -vo xv, but with ~12.7seconds systime, that's about 26% of cpu load compared to 0.9%!!! This might be due to 1) Bad Drivers of savage, 2) S3 Savage chip beeing slower then the exellent Matrox chip. So if you look at this, you'll see that every percent gained by assembler optimizations helps to decrease cpuloadf and get fluid playback. And libac3 contains a lot of SSE optimizations! -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From as at sci.fi Fri Jul 27 18:14:24 2001 From: as at sci.fi (Anssi Saari) Date: Fri, 27 Jul 2001 19:14:24 +0300 Subject: [Mplayer-users] Re: video card(s)? In-Reply-To: <3B61414D.7010900@nerd.dk>; from cyrax@nerd.dk on Fri, Jul 27, 2001 at 12:24:13PM +0200 References: <3B61414D.7010900@nerd.dk> Message-ID: <20010727191424.A11786@sci.fi> On Fri, Jul 27, 2001 at 12:24:13PM +0200, Mark Gj?l wrote: > Anyway. As far as I'm concerned the drivers for nvidia-based gfx-cards > are adequate. I'll have to agree. I do get an occasional crash with nvidia, but that's about once in two or three weeks and about half of them are just the X server dying, the other half is a complete hang of video. I can usually still log in from the net, but that doesn't help much if video can't be reset... If the Nvidia image quality weren't shit in 1600x1200, I'd be happy with it. Elsa Gladiac MX is the card in question, Geforce 2 MX with 32MB. I dug out my old ATI xpert at work card (3D Rage Pro, 8MB memory, PCI) to see what ATI support is like. Slow and buggy for this card, at least. 32-bit color mode draws all kind of junk all over the screen when moving or resizing a window. Even hardware cursor is not supported in XFree86 4.0.3, and the card is from 1996 or so! Apparently that support has finally been added in 4.1.0, I'll try that later. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Fri Jul 27 18:20:03 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Fri, 27 Jul 2001 18:20:03 +0200 Subject: [Mplayer-users] Re: video card(s)? In-Reply-To: <20010727191424.A11786@sci.fi> References: <3B61414D.7010900@nerd.dk> <20010727191424.A11786@sci.fi> Message-ID: <7537779373.20010727182003@gmx.de> Hello Anssi, Friday, July 27, 2001, 6:14:24 PM, you wrote: > On Fri, Jul 27, 2001 at 12:24:13PM +0200, Mark Gj?l wrote: >> Anyway. As far as I'm concerned the drivers for nvidia-based gfx-cards >> are adequate. > I'll have to agree. I do get an occasional crash with nvidia, but that's > about once in two or three weeks and about half of them are just the X server > dying, the other half is a complete hang of video. I can usually still > log in from the net, but that doesn't help much if video can't be reset... > If the Nvidia image quality weren't shit in 1600x1200, I'd be happy with > it. Elsa Gladiac MX is the card in question, Geforce 2 MX with 32MB. hmm, are you sure bad image quality in high res is due to Nvidia card? Maybe you should use a BNC cable to connect to your monitor, it has much better quality then standard vga cable. (But I think G400 still has better 2D Quality then NVidia cards) > I dug out my old ATI xpert at work card (3D Rage Pro, 8MB memory, PCI) to see > what ATI support is like. Slow and buggy for this card, at least. 32-bit > color mode draws all kind of junk all over the screen when moving or > resizing a window. Even hardware cursor is not supported in XFree86 > 4.0.3, and the card is from 1996 or so! Apparently that support has > finally been added in 4.1.0, I'll try that later. -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From falk at lunat23.de Fri Jul 27 18:25:50 2001 From: falk at lunat23.de (Falk Schubert) Date: Fri, 27 Jul 2001 18:25:50 +0200 Subject: [Mplayer-users] libac3 and sse In-Reply-To: <16135411018.20010727174035@gmx.de> References: <20010713211507.7735e9b9.falk@lunat23.de> <0107132137080D.04350@astral> <20010721014838.3070b144.falk@lunat23.de> <170108236876.20010722165543@gmx.de> <20010722213824.4bd97a0b.falk@lunat23.de> <128128228763.20010722222855@gmx.de> <20010726231645.2a838da0.falk@lunat23.de> <4519414837.20010727131359@gmx.de> <20010727163318.08df0a73.falk@lunat23.de> <16135411018.20010727174035@gmx.de> Message-ID: <20010727182550.55b9c6e6.falk@lunat23.de> Well, I have a ATI Rage Mobility 128 8MB... I tried out to patch my kernel sources of FreeBSD to include the SSE, since it's not originally supported yet, however I failed to do so....let me try to enable my Kernel to support the SSE ...if I find a patch that works;) falk -- enjoy your day! Falk Schubert Joellenbeckerstr. 287 33613 Bielefeld _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From falk at lunat23.de Fri Jul 27 19:08:31 2001 From: falk at lunat23.de (Falk Schubert) Date: Fri, 27 Jul 2001 19:08:31 +0200 Subject: [Mplayer-users] libac3 and sse In-Reply-To: <16135411018.20010727174035@gmx.de> References: <20010713211507.7735e9b9.falk@lunat23.de> <0107132137080D.04350@astral> <20010721014838.3070b144.falk@lunat23.de> <170108236876.20010722165543@gmx.de> <20010722213824.4bd97a0b.falk@lunat23.de> <128128228763.20010722222855@gmx.de> <20010726231645.2a838da0.falk@lunat23.de> <4519414837.20010727131359@gmx.de> <20010727163318.08df0a73.falk@lunat23.de> <16135411018.20010727174035@gmx.de> Message-ID: <20010727190831.470aa18f.falk@lunat23.de> > > I have a Mobile Celeron 700Mhz...it's in a Dell Inspirion 4000 with 128MB > > RAM... > it does support SSE extensions so it might be problem of your kernel, > if you get yourself a recent gdb version we can debug it. Where did you find that the Mobile Celeron has SSE? I checked out Intel's Products Infos and didn't find anything;( Is the standard included in all 'newer' cpu's? And do the amd's support this as well? thanks falk PS: Do you have any experience with the recent versions of xmmp and xmps? I was told that they have evolved quite rapidly recently....but are they real capable players? -- enjoy your day! Falk Schubert Joellenbeckerstr. 287 33613 Bielefeld _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From bofh at mailme.dk Fri Jul 27 19:31:33 2001 From: bofh at mailme.dk (Michael Bernhard =?iso-8859-15?q?S=F8rensen?=) Date: Fri, 27 Jul 2001 19:31:33 +0200 Subject: [Mplayer-users] Something about libcss Message-ID: <01072719313301.07259@paladin> Hello out there. I'm trying to make mplayer working here. It did well, but I noticed that I couldn't play DVD movies, so I downloaded libcss, ccompiled it and installed it. Apparently done okay. But when I try to play from my DVD movie with this: mplayer -dvd /dev/dvd /media/dvd/video_ts/vts_01_0.vob It prints this: "error while loading shared libraries: libcss.so.0: cannot load shared object file: No such file or directory" I checked up on the file and it IS there in /usr/local/lib. Someone got any idea? Michael B. S?rensen Denmark _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre at debian.org Fri Jul 27 19:42:25 2001 From: andre at debian.org (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Fri, 27 Jul 2001 19:42:25 +0200 Subject: [Mplayer-users] Something about libcss In-Reply-To: <01072719313301.07259@paladin> References: <01072719313301.07259@paladin> Message-ID: <20010727194225.A28817@telia.com> Michael Bernhard S?rensen wrote: > I checked up on the file and it IS there in /usr/local/lib. What does 'ldconfig -v | grep libcss' as root tell you? If it doesn't print anything then you need to add /usr/local/lib to your /etc/ld.so.conf file and run ldconfig as root. -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From as at sci.fi Fri Jul 27 19:58:11 2001 From: as at sci.fi (Anssi Saari) Date: Fri, 27 Jul 2001 20:58:11 +0300 Subject: [Mplayer-users] Re: video card(s)? In-Reply-To: <7537779373.20010727182003@gmx.de>; from atmosfear@users.sourceforge.net on Fri, Jul 27, 2001 at 06:20:03PM +0200 References: <3B61414D.7010900@nerd.dk> <20010727191424.A11786@sci.fi> <7537779373.20010727182003@gmx.de> Message-ID: <20010727205811.A16103@sci.fi> On Fri, Jul 27, 2001 at 06:20:03PM +0200, Felix Buenemann wrote: > hmm, are you sure bad image quality in high res is due to Nvidia card? > Maybe you should use a BNC cable to connect to your monitor, it has > much better quality then standard vga cable. (But I think G400 still > has better 2D Quality then NVidia cards) Oh, I'm using a BNC cable. It doesn't really help. There's a website somewhere which explains the problem: shoddy low-pass filters on many nvidia-based cards which allow the cards to pass silly FCC regulations and also limits the bandwidth quite a lot. I've been thinking of trying to fix that, basically you just short coils and cut capacitors, but haven't gotten around to it yet. Buying a Radeon card might be a better solution... _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From Tapani.Liukkonen at kemi.fi Fri Jul 27 20:59:18 2001 From: Tapani.Liukkonen at kemi.fi (Tapani Liukkonen) Date: Fri, 27 Jul 2001 20:59:18 EETDST Subject: [Mplayer-users] Error putting data... In-Reply-To: <01072719313301.07259@paladin> Message-ID: Hi, i just got following kind of output from mplayer: [xv] dcx: 1 dcy: 23 dx: 0 dy: 0 dw: 568 dh: 517.096 275 60% 10% 12.6% 275 Error putting data into input pin ffffff9ct: 1.677 1760 59% 9% 11.9% 1324 Error putting data into input pin ffffff9ct: 1.909 1818 59% 9% 12.0% 1382 Error putting data into input pin ffffff9ct: 2.609 2101 59% 9% 11.9% 1665 Error putting data into input pin ffffff9ct: 2.555 2142 59% 9% 11.9% 1706 A: 118.0 ( 118.1) V: 117.9 A-V: 0.256 ct: 3.512 2869 60% 9% 12.0% 2433 but file plays from beginning to end normally. So im curious, is this problem with asf file or some problem with mplayer? (I know at my mplayer is bit old, havent updated as current one works greatly and i dont have mmx/3dnow/mmx stuff so i dont get so much out from new optiomizations) some info: mplayer -vo xv BITL_Midlands-Today.asf MPlayer 0.17cvs-010701-13:24(C) 2000-2001 (cut) Detected ASF file format! ==> Found audio stream: 1 ASF: audio scrambling: 1 x 1 x 1116 ==> Found video stream: 2 VIDEO: [MP43] 320x240 24bpp [V] filefmt:6 fourcc:0x3334504D size:320x240 fps:1000.00 ftime:=0.0010 Found audio codec: [divx] drv:4 (DivX audio (WMA)) Loading DLL: /usr/lib/win32/divxa32.acm OK dec_audio: Allocating 16384 + 65536 = 81920 bytes for output buffer AUDIO: srate=44100 chans=2 bps=2 sfmt=0x10 ratio: 8010->176400 Found video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) Loading DLL: /usr/lib/win32/divx_c32.ax OK Using DirectShow codec: divx_c32.ax etc. This asf is from http://www.c64audio.com/bitlive/Birmingham/index.htm and multimedia downloads, second BBC report(14MB). _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From as at sci.fi Fri Jul 27 20:35:15 2001 From: as at sci.fi (Anssi Saari) Date: Fri, 27 Jul 2001 21:35:15 +0300 Subject: [Mplayer-users] Re: Tooooo slow Message-ID: <20010727213515.B16103@sci.fi> Joshua N Pritikin wrote: > Even when i use `-vo null -framedrop', the video-audio skew climbs to about > 10 seconds and then blows up with a buffer overflow. The SiS video card > has hardware support for DVD but linux drivers don't exist. It doesn't > even have XVideo support. I was just browsing the XFree86 CVS. It's of course hard to say what's actually supported from the source, but apparently an option to disable Xvideo has recently been added, so one would think there is some Xvideo support. So maybe you should try 4.1.0 or getting the SiS driver from CVS and compiling it yourself. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Sat Jul 28 00:53:07 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Fri, 27 Jul 2001 22:53:07 +0000 (:) Subject: [Mplayer-users] Re: ATI Radeon VE In-Reply-To: <200107262050.f6QKopG04087@alison.hemmet.chalmers.se> Message-ID: Hi, Christoph H. Lampert! On 2001-07-26 22:50:51 you wrote: >Am Donnerstag, 26. Juli 2001 23:50 schrieben Sie: >> Hi! >> >> My efforts are finished. I've get something workable from XFree86 :( >> But I've found a lot of lacks and I don't know where are problems :( >> >> 1) After applying Suse's XFree86 I could get graphics only on "second head" >> It's - ok from windows and linux points but some "old" DOS games which >> use VESA (through int10h) can work only with first head so I should replug >> monitor every time when I want to use them. > >Could you test TVout? Is there anything in the Docs about DVI out? >From latest XFree86-CVS tree (was commited 1.5 day ago): Commit ATI's driver patch for ... ATI LINUX DRIVER UPDATE July, 2001, ATI Technology 1. New features: (1) New cards: RADEON VE, RADEON MOBILITY M6, All-in-Wonder RADEON, RAGE 128 PRO ULTRA (2) Digital Flat Panel and LCD (VE and M6 only). (3) Dual-head and Xinerama (VE and M6 only). (4) EDID using DDC2(I2C) interface. 2. Unsupported features and known bugs: (1) DRI is not currently working with dual-head/Xinerama setup. (2) Monitor hot swapping (P&D) is not supported. (3) Power management is not fully implemented. (4) TV output is not supported. (Note: I didn't have this CVS tree - it's too huge traffic) >> >> Now about problems: >> MPLAYER: works only -vo xv, x11, sdl:x11 >> -dga works but too strange: I've watched in window only horizontal lines >> (like I've get overclocked vertical sync but in window :) >> -fsdga - not found. > >Okay, so no DGA. Fine with me, xv is better anyway. > Winnt is enough, even! >> Well: when I watched well famous 405.avi I've get at bottom of picture >> several strange green lines (like on nVidia). Also I've found some strange >> transparent diagonalled stripes which have green and pink colors. >> But it's not problem of unquantize - on S3Virge everythink - ok). >> >> When I've watched DVD then in places where store is movied (even slowly) >> I've get very crumpled pictures with horizontal jaming. (Under WinNT these >> problems don't exist). >> >> AFAIK it would be better to find out solution these problems in Linux's >> drivers, but it makes useless any video software under Linux with this >> card. > >That's bad :-( Maybe you should ask the driver's developers about it? > >The modules should be open source, and SuSE support is not bad, either. >Don't give up on them. These are the very first drivers that support the card >at all. Maybe you will never see hardware MPEG functions supported in Linux >drivers, but still the drivers will get better. > >And still, if you want to get rid of the card (e.g. swap again ATI >XPer at Work..) > Do you still want to buy Radeon VE? Best regards! Nick (2001-07-27 22:43:01) P.S.: As for me - I hope that GPL'ed drivers with ATI support (as you could see above) will be perfect, but as soon? Probably I save this card for me, since I have pity on Vortex2 even now and I don't want to feel the same in the future about this card. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Fri Jul 27 22:38:56 2001 From: kinali at gmx.net (Attila Kinali) Date: Fri, 27 Jul 2001 22:38:56 +0200 Subject: [Mplayer-users] strange percentage numbers In-Reply-To: <200107242018.WAA21236@thot.banki.hu> References: <200107242018.WAA21236@thot.banki.hu> Message-ID: Hi, On Tue, 24 Jul 2001 22:18:41 +0200 (CEST) Arpi wrote: > > I think that win32 codecs uses SSE, doesn't matter if you disable it > in mplayer (they use built-in cpu detection code). > > And sse corrupts FPU registers, this way float percentage numbers are > badly calculated. Could be, but I dont think it's this. See below. > Can you try different codecs (line vfw,dshow,ffmpeg,divx4 etc) for > same file? Does codec matter? Does video mode (x11,xv,null,etc) matter? I tested divx, divxds, ffdivx and mpeg, with different output devices (x11, sdl, dga). I always got those strange percentage numbers. Looks like the problem is somewhere in mplayer itself. Could be the calculating routine itself (but i didnt check the code, so forgive me if i'm wrong). Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 27 22:43:02 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 27 Jul 2001 22:43:02 +0200 (CEST) Subject: [Mplayer-users] libac3 and sse In-Reply-To: <16135411018.20010727174035@gmx.de> Message-ID: <200107272043.WAA48842@thot.banki.hu> Hi, > much more with x11 out). You should use the -benchmark -nosound option > to see how much cpu time is spend to the system outside of mplayer, > here's a nice example: > Playing on my server PIII 500, 512KB L2 @250MHz, 256MB RAM, Matrox G400 AGP > 32MB: needs ~44.8seconds to playback my 2:30 divx test trailer > (640x272, ~1200kbps) using -vo mga, systime here is ~0.4seconds. > Compared with my notebook PIII 850, 256KB L2 @850MHz, 128MB RAM, > Savage MX 8MB AGP: needs ~49.5seconds for the same clip using -vo xv, > but with ~12.7seconds systime, that's about 26% of cpu load compared > to 0.9%!!! Little correction: To get CPU usage of video out, add system time and VO: time! system is 0% for mga, because the whole video out process is done by libvo, while with X output (x11,xv) blitting is done by the X server (happens outside of mplayer -> it's systime then) but VO is still >0, because colorspace conversion, subtitles is made by libvo. so, to get video cpu usage: mplayer -benchmark -nosound file.vob add Sys and VO times, and divide by total time! It works only with -nosound. with sound, systime will contain usleep and ioctl waiting times too! A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 27 22:54:46 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 27 Jul 2001 22:54:46 +0200 (CEST) Subject: [Mplayer-users] libac3 and sse In-Reply-To: <20010727190831.470aa18f.falk@lunat23.de> Message-ID: <200107272054.WAA53402@thot.banki.hu> Hi, > > > I have a Mobile Celeron 700Mhz...it's in a Dell Inspirion 4000 with > 128MB > > > RAM... > > it does support SSE extensions so it might be problem of your kernel, > > if you get yourself a recent gdb version we can debug it. > > Where did you find that the Mobile Celeron has SSE? I checked out Intel's They with SSE are called celeron2. AFAIK all celeron >=566MHz are celeron2 (same as pentium3, but only 128kB cache and 66MHz FSB, but newer celeron2 cpus (>=800MHz) has 100MHz FSB so it can be run at 1066 at 133, even better than 1GHz P3 :)) > Products Infos and didn't find anything;( Is the standard included in all > 'newer' cpu's? And do the amd's support this as well? amd has 3dnowext, not sse. > PS: Do you have any experience with the recent versions of xmmp and xmps? > I was told that they have evolved quite rapidly recently....but are they > real capable players? xmmp: afaik development is stopped, at least goint too slow. we had plans to merge with mplayer some months ago, but we gave it up. xmps: it never was an usable player (IMHO). but it was the first divx "player" for linux. player is quoted, because it wasn't usable, but you at least see some frames of the movie :) i spent 2 weeks hacking to get it work, but finally gave up. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 27 22:59:20 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 27 Jul 2001 22:59:20 +0200 (CEST) Subject: [Mplayer-users] Error putting data... In-Reply-To: Message-ID: <200107272059.WAA60028@thot.banki.hu> Hi, > Error putting data into input pin ffffff9ct: 2.555 2142 59% 9% 11.9% > 1706 > A: 118.0 ( 118.1) V: 117.9 A-V: 0.256 ct: 3.512 2869 60% 9% 12.0% > 2433 > > but file plays from beginning to end normally. > > So im curious, is this problem with asf file or some problem with mplayer? It's a broken file. (divx codec doesn't accept the video frame, so 'putting data to its input pin' fails.) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Fri Jul 27 23:11:24 2001 From: arpi at thot.banki.hu (Arpi) Date: Fri, 27 Jul 2001 23:11:24 +0200 (CEST) Subject: [Mplayer-users] strange percentage numbers In-Reply-To: Message-ID: <200107272111.XAA53498@thot.banki.hu> Hi, > > Can you try different codecs (line vfw,dshow,ffmpeg,divx4 etc) for > > same file? Does codec matter? Does video mode (x11,xv,null,etc) matter? > > > I tested divx, divxds, ffdivx and mpeg, with different output > devices (x11, sdl, dga). I always got those strange percentage numbers. Hmm. > Looks like the problem is somewhere in mplayer itself. Could be Agree. Can you please upload the file? (at least a part enough for bug reprezentation) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From martin at bretschneidernet.de Fri Jul 27 23:51:43 2001 From: martin at bretschneidernet.de (Martin Bretschneider) Date: Fri, 27 Jul 2001 23:51:43 +0200 Subject: [Mplayer-users] some problems Message-ID: <20010727235143.1ff9e5bb.martin@bretschneidernet.de> Hi folks, I've some problem with the current (?) release (0.17a-IdegCounter) and the win32-dodec from the hp. 1. A quite bad Tomb Raider-Trailer (Intel Indeo 3.1/3.2) is played back very weired. It's not easy to describe in English;) Just think there's a horizontal line in the center of the displayed video. All the horizental rows of the video are mirrored at/on/whatever to the center line, so that the top-row becomes the bottom-row and so and so on. Looks very funny. First I thought there wery kyrillic letter;) 2. I've got a film named "teaching mrs. tingle" that worked once withe the 0.10pre10/22 but now: Encrypted VOB file (not compiled with libcss support)! Read file DOCS/DVD ==> Found audio stream: 16 {PTS_err:1} May I really compile the stuff 'cause no deb exists? 3. I've got another video. the 6the sense (divx). I start mplayer and the video appears but only for 3 seconds: Then the error Exiting... (End of file) vo: uninit! appears on the shell. It also worked once. What can I do now. Upload the beginnings? Where? What programm to use? -- Where prejudice exists it always discolors our thoughts. (o_ When in doubt tell the truth. Mark Twain (o| //\ (o_. ' In order to verify the truth use gnupg. (o< //\ V_/_ //\c{} _O) Key-ID: 4EA52583 Regards, Martin (*_ //\ V_/, _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sat Jul 28 00:04:37 2001 From: arpi at thot.banki.hu (Arpi) Date: Sat, 28 Jul 2001 00:04:37 +0200 (CEST) Subject: [Mplayer-users] some problems In-Reply-To: <20010727235143.1ff9e5bb.martin@bretschneidernet.de> Message-ID: <200107272204.AAA33818@thot.banki.hu> Hi, > I've some problem with the current (?) release (0.17a-IdegCounter) and > the win32-dodec from the hp. current release is 0.18pre5, but it's old too, use CVS! > 1. A quite bad Tomb Raider-Trailer (Intel Indeo 3.1/3.2) is played back > very weired. It's not easy to describe in English;) > > Just think there's a horizontal line in the center of the displayed > video. All the horizental rows of the video are mirrored at/on/whatever > to the center line, so that the top-row becomes the bottom-row and so and > so on. Looks very funny. First I thought there wery kyrillic letter;) known (limiattion of codecs), just read FAQ. btw there are workarounds for it, for exampe it's ok with -vo sdl or -vo x11 > 2. I've got a film named "teaching mrs. tingle" that worked once withe > the 0.10pre10/22 but now: > Encrypted VOB file (not compiled with libcss support)! Read file DOCS/DVD > ==> Found audio stream: 16 > {PTS_err:1} but it plays the file, besides this warning message? if not, please upload this file. > May I really compile the stuff 'cause no deb exists? yes > 3. I've got another video. the 6the sense (divx). > > I start mplayer and the video appears but only for 3 seconds: Then the > error > Exiting... (End of file) > vo: uninit! > appears on the shell. It also worked once. upload this file, i'll check (but first try with latest cvs version, maybe already fixed) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From brendan at tjs.org Sat Jul 28 02:14:30 2001 From: brendan at tjs.org (brendan at tjs.org) Date: Fri, 27 Jul 2001 19:14:30 -0500 Subject: [Mplayer-users] some problems In-Reply-To: <20010727235143.1ff9e5bb.martin@bretschneidernet.de>; from martin@bretschneidernet.de on Fri, Jul 27, 2001 at 11:51:43PM +0200 References: <20010727235143.1ff9e5bb.martin@bretschneidernet.de> Message-ID: <20010727191430.A25484@colby.tjs.org> On Fri, Jul 27, 2001 at 11:51:43PM +0200, Martin Bretschneider wrote: > Hi folks, > > I've some problem with the current (?) release (0.17a-IdegCounter) and > the win32-dodec from the hp. > > > May I really compile the stuff 'cause no deb exists? > Check DOCS/DEBIAN for info on creating deb packages from the source. -Brendan _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From vishnu at pobox.com Fri Jul 27 19:33:28 2001 From: vishnu at pobox.com (Joshua N Pritikin) Date: Fri, 27 Jul 2001 23:03:28 +0530 Subject: [Mplayer-users] Tooooo slow In-Reply-To: <200107271429.QAA34254@thot.banki.hu> Message-ID: <20010727230328.A501@ns.durga.edu.in> On Fri, Jul 27, 2001 at 04:29:38PM +0200, Arpi wrote: > > But even `-vo null' is too slow! > > Then you have really probs with hw. > I have celeron2-600 overclocked to 900mhz, but dvd decoding (-vo null) eats > about 25% cpu (it's about 225MHz if calced back): Strange. i used hdparm to double my disk speed and i've been tweaking my BIOS settings all night, but it's still not fast enough. > BENCHMARK%: V: 19.3859% VO: 0.0000% A: 4.1101% Sys: 76.5040% = 100.0000% i'm getting something more like: BENCHMARK%: V: 27.1969% VO: 0.0000% A: 14.9036% Sys: 57.8995% = 100.0000% > i think your cpu should be enough for pure decoding, maybe the drive > is too slow, or maybe your cache/memory? > or simply amd sucks :) Possible. :-P -- Get self-realization at ... ? Victory to the Divine Mother!! _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sat Jul 28 05:39:16 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sat, 28 Jul 2001 05:39:16 +0200 Subject: [Mplayer-users] libac3 and sse In-Reply-To: <20010727190831.470aa18f.falk@lunat23.de> References: <20010713211507.7735e9b9.falk@lunat23.de> <16135411018.20010727174035@gmx.de> <20010727190831.470aa18f.falk@lunat23.de> Message-ID: <01072805391600.15797@astral> On Friday, 27. July 2001 19:08, you wrote: > > > I have a Mobile Celeron 700Mhz...it's in a Dell Inspirion 4000 with > > 128MB > > > > RAM... > > > > it does support SSE extensions so it might be problem of your kernel, > > if you get yourself a recent gdb version we can debug it. > > Where did you find that the Mobile Celeron has SSE? I checked out Intel's > Products Infos and didn't find anything;( Is the standard included in all > 'newer' cpu's? And do the amd's support this as well? Currently there is only support for thr SSE instructions on PIII, P4 and Celeron II (including newer mobile Celerons), but there might be support for sse in the upcoming AMD K8, the predecessor of the K7 (Athlon). However AMDs 3DNow! Technology (introduced with the K6-2) does about the same as SSE working on 2 instead of 4 single precision floats, but it uses the mmx registers (which really are the FPU registers), whereas SSE uses a new, independent register set. You should find your CPU here: http://www.sandpile.org/impl/p3.htm > > thanks falk > > > PS: Do you have any experience with the recent versions of xmmp and xmps? > I was told that they have evolved quite rapidly recently....but are they > real capable players? nope I haven't but I'm 100% sure they're worse then mplayer =) -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sat Jul 28 06:48:21 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sat, 28 Jul 2001 06:48:21 +0200 Subject: [Mplayer-users] some problems In-Reply-To: <200107272204.AAA33818@thot.banki.hu> References: <200107272204.AAA33818@thot.banki.hu> Message-ID: <01072806482103.15797@astral> On Saturday, 28. July 2001 00:04, you wrote: > Hi, > [snip] > > > 1. A quite bad Tomb Raider-Trailer (Intel Indeo 3.1/3.2) is played back > > very weired. It's not easy to describe in English;) > > > > Just think there's a horizontal line in the center of the displayed > > video. All the horizental rows of the video are mirrored at/on/whatever > > to the center line, so that the top-row becomes the bottom-row and so and > > so on. Looks very funny. First I thought there wery kyrillic letter;) > > known (limiattion of codecs), just read FAQ. > btw there are workarounds for it, for exampe it's ok with -vo sdl or -vo > x11 ... and -flip commandline switch. [snip] > > A'rpi / Astral & ESP-team > -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sat Jul 28 06:38:33 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sat, 28 Jul 2001 06:38:33 +0200 Subject: [Mplayer-users] strange percentage numbers In-Reply-To: References: <200107242018.WAA21236@thot.banki.hu> Message-ID: <01072806383302.15797@astral> On Friday, 27. July 2001 22:38, you wrote: > Hi, > > On Tue, 24 Jul 2001 22:18:41 +0200 (CEST) Arpi wrote: > > I think that win32 codecs uses SSE, doesn't matter if you disable it > > in mplayer (they use built-in cpu detection code). > > > > And sse corrupts FPU registers, this way float percentage numbers are > > badly calculated. No, SSE can't corrupt FPU registers, as it uses it's own set of registers, but MMX could do so as it's mapped on FPU registers and thus emms is needed to restore their state. [snip] > > Attila Kinali -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sat Jul 28 06:53:16 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sat, 28 Jul 2001 06:53:16 +0200 Subject: [Mplayer-users] Tooooo slow In-Reply-To: <20010727230328.A501@ns.durga.edu.in> References: <20010727230328.A501@ns.durga.edu.in> Message-ID: <01072806531604.15797@astral> On Friday, 27. July 2001 19:33, you wrote: > On Fri, Jul 27, 2001 at 04:29:38PM +0200, Arpi wrote: > > > But even `-vo null' is too slow! > > > > Then you have really probs with hw. > > I have celeron2-600 overclocked to 900mhz, but dvd decoding (-vo null) > > eats about 25% cpu (it's about 225MHz if calced back): > > Strange. i used hdparm to double my disk speed and i've been tweaking my > BIOS settings all night, but it's still not fast enough. In case you have an IDE DVD drive make sure you enable DMA access for it using hdparm, or diskaccess will eat a lot of cpu time (see high sys time inn your benchmark). > > > BENCHMARK%: V: 19.3859% VO: 0.0000% A: 4.1101% Sys: 76.5040% = > > 100.0000% > > i'm getting something more like: > > BENCHMARK%: V: 27.1969% VO: 0.0000% A: 14.9036% Sys: 57.8995% = 100.0000% > > > i think your cpu should be enough for pure decoding, maybe the drive > > is too slow, or maybe your cache/memory? > > or simply amd sucks :) > > Possible. :-P -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Sat Jul 28 13:55:58 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Sat, 28 Jul 2001 11:55:58 +0000 (:) Subject: [Mplayer-users] Re: ATI Radeon VE Message-ID: Hi, all, who interest with this thread! I've just configured my ATI Radeon VE finely under Linux!!! (Of course through second head :(. It's still big problem) I didn't understand what was wrong - but now I've get enough perfect picture on my monitor. Before I had 800x600 monitor resolution and 1024x768 virtual video resolution and when mplayer was ran on such system it distorted picture, but now I've configured my X11 to set 1024x768 on monitor and got enough perfect picture. So this card can be usable under Linux already now, althrough some little problems still exist. It seems that DVD's picture is better in some stores under winnt-DVDplayer than under Linux-mplayer (probably sharpness or something likewise). Maybe it's postprocessing (or not well enough or unnecessary) for libmpeg2, Arpi? It don't matter - what -vo I use, althrough better video driver for this card became -vo vx. As I've found - -vo x11 doesn't keep correct aspect ratio :(. And last: I don't know - is it effect of 3D's performance but -vo gl produces only 5-10 frames per second on this chip. Best regards! Nick (2001-07-28 11:35:25) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Sat Jul 28 10:05:03 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Sat, 28 Jul 2001 10:05:03 +0200 (CEST) Subject: [Mplayer-users] [patch] Remove 'make dep' from debian/rules file In-Reply-To: <20010726033603.A15621@telia.com> Message-ID: > - make dep > make mplayer great, but I don't understand why. > When I get some time I'll redo the debian package using debhelper. It can > be cleaned up quiet a bit. could you take a look at what I commited lately? there are still some things to do - like let dh_manpages handle manpages and not mplayer's make install. Have you got any experience with writing info docs? this could be a great way to put comprehensive docs that wouldn't fit in man ( like -vc stuff ) -- Dariusz Pietrzak Excuse me, I'm cixelsyd today _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dariush at ajax.umcs.lublin.pl Sat Jul 28 10:12:54 2001 From: dariush at ajax.umcs.lublin.pl (Dariusz Pietrzak) Date: Sat, 28 Jul 2001 10:12:54 +0200 (CEST) Subject: [Mplayer-users] BugCounter-debian In-Reply-To: <003201c1093a$9154c710$8cd03c86@informatik.uniulm.de> Message-ID: > the newest 0.18. After installing the deb(built with d?kg-buildpackage), I > get the error: post-install error 10. could you please check if new postinst throws an error on you? I had only one machine that behaved like that, and I couldn't locate what exactly the problem was ( possibly some ^I instead of space in template ), and on that particular machine it's fixed. -- Dariusz Pietrzak Excuse me, I'm cixelsyd today _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Sat Jul 28 11:02:13 2001 From: kinali at gmx.net (Attila Kinali) Date: Sat, 28 Jul 2001 11:02:13 +0200 Subject: [Mplayer-users] Very low audio volume In-Reply-To: <3B5C09B5.F8120653@itp.uni-hannover.de> References: <3B5C09B5.F8120653@itp.uni-hannover.de> Message-ID: On Mon, 23 Jul 2001 13:25:41 +0200 Michael Flohr wrote: > just compiled MPlayer 0.18pre. It works great. > However, I noticed one very strange thing I can't explain. > When playing AVI files, the sound volume is EXTREMELY low. > Pushing master and pcm to max makes sound barely audible. Try 0.18pre5 (or is it pre6 ?) or get it from cvs. Things changed a lot since 0.18pre > Playing the same files with aviplay, sound is normal, although > overall movie quality and preformance seems to be not as good > as MPlayer's. I remember a time, where the movie quality was in aviplay better :-) > Did anyone notice something similar? > By the way: I run alsa0.5.10, but I use "-ao oss" for sound output > since "-ao alsa5" disables sound with an error roughly like > "alsa-init: ... invalid parameters ..." Alsa 0.5.x is broken. I never got -ao alsa to work. If you have time, try 0.9beta6 and tell us whether it works. (sorry, no time to do it myself). Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Sat Jul 28 11:20:57 2001 From: kinali at gmx.net (Attila Kinali) Date: Sat, 28 Jul 2001 11:20:57 +0200 Subject: [Mplayer-users] strange percentage numbers In-Reply-To: <01072806383302.15797@astral> References: <200107242018.WAA21236@thot.banki.hu> <01072806383302.15797@astral> Message-ID: On Sat, 28 Jul 2001 06:38:33 +0200 Felix Buenemann wrote: > No, SSE can't corrupt FPU registers, as it uses it's own set of registers, > but MMX could do so as it's mapped on FPU registers and thus emms is needed > to restore their state. I dont think it's the MMX code, because it only happens on my notebook with it's PIII but not on my desktop with PII. Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Sat Jul 28 11:38:04 2001 From: kinali at gmx.net (Attila Kinali) Date: Sat, 28 Jul 2001 11:38:04 +0200 Subject: [Mplayer-users] OT: videocards database Message-ID: Hi, As we have a lot of discussion about which videocard is the best, maybe we should add an other file to DOCS that collects all the advantages and disadvantages of the videocards reported to this list. I think it would save some trafic here and would be a great source for information for those who want to buy a new card. Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre at debian.org Sat Jul 28 14:41:10 2001 From: andre at debian.org (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Sat, 28 Jul 2001 14:41:10 +0200 Subject: [Mplayer-users] [patch] Remove 'make dep' from debian/rules file In-Reply-To: References: Message-ID: <20010728144110.A6581@telia.com> > > - make dep > > make mplayer > great, but I don't understand why. Because 'make dep' is not needed any more. > could you take a look at what I commited lately? I'll check it out. I know debian folks (I am a debian developer myself) have been thinking of making an official package of mplayer but there are a lot of licensing issues that needs to be worked out before that can be done. Frankly I think a 'rm -rf debian/' should be done in the source for mplayer since it's basically a glorified tarball. -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sat Jul 28 15:26:11 2001 From: arpi at thot.banki.hu (Arpi) Date: Sat, 28 Jul 2001 15:26:11 +0200 (CEST) Subject: [Mplayer-users] Re: ATI Radeon VE In-Reply-To: Message-ID: <200107281326.PAA53318@thot.banki.hu> Hi, > (probably sharpness or something likewise). Maybe it's postprocessing > (or not well enough or unnecessary) for libmpeg2, Arpi? try to play with -pp option -pp 0 - no postp -pp 63 - all postp filters i think that no postp needed for DVD, it's high bitrate enough. postproc is recommended for low bitrate mpeg1 files. > And last: I don't know - is it effect of 3D's performance but -vo gl > produces only 5-10 frames per second on this chip. do you have DRI set up corectly? how many fps do you get from 'gears' ? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From as at sci.fi Sat Jul 28 16:19:53 2001 From: as at sci.fi (Anssi Saari) Date: Sat, 28 Jul 2001 17:19:53 +0300 Subject: [Mplayer-users] Re: OT: videocards database In-Reply-To: ; from kinali@gmx.net on Sat, Jul 28, 2001 at 11:38:04AM +0200 References: Message-ID: <20010728171952.A5396@sci.fi> On Sat, Jul 28, 2001 at 11:38:04AM +0200, Attila Kinali wrote: > As we have a lot of discussion about which videocard is > the best, maybe we should add an other file to DOCS > that collects all the advantages and disadvantages of the > videocards reported to this list. I think it would save > some trafic here and would be a great source for information > for those who want to buy a new card. The information in DOCS/VIDEOCARDS is a good start. Maybe it could be a little clearer, but with all the different output drivers I don't know how. I have an update to it however. For NVidia cards the open source "nv" driver in XFree86 4.1.0 has Xvideo support. The open source driver was even slightly faster (0.8%) than the NVidia's 1.0-1251 decoding video on my system. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From asalamon at elender.hu Sat Jul 28 15:55:33 2001 From: asalamon at elender.hu (Andras Salamon) Date: Sat, 28 Jul 2001 15:55:33 +0200 (CEST) Subject: [Mplayer-users] SDL -noxv problema Message-ID: Hi, I tried -vo sdl -noxv with several movies, and it works only for YUY2 (divx decoded by windows dll), and not for YV12 (mpeg files, divx decoded by ffdivx). Is it a known bug? I'm using SDL 1.2.0. Sala _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From asalamon at elender.hu Sat Jul 28 16:58:18 2001 From: asalamon at elender.hu (Andras Salamon) Date: Sat, 28 Jul 2001 16:58:18 +0200 (CEST) Subject: [Mplayer-users] mp3lib problem Message-ID: Hi, Yesterday's modification of mp3lib does not work in my computer. When I try to play a movie, I've got the following: mp3lib: Processor ID: 686 mp3lib: Using SSE! optimized decore. Illegal instruction (core dumped) If I use ./configure --disable-sse, everything works fine. But it worked fine with SSE before. Sala _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From riffraff at columbia.ton.tut.fi Sat Jul 28 20:46:36 2001 From: riffraff at columbia.ton.tut.fi (Juha Kuikka) Date: Sat, 28 Jul 2001 21:46:36 +0300 (EEST) Subject: [Mplayer-users] Maintaining movie acpect ratio in windowed mode, possible? Message-ID: Hi I was trying to find a feature that forces windows acpect ratio to remain the same as the films when resizing window. Is there such a feature in mplayer or am I just blind?-) - Juha Kuikka _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Sat Jul 28 21:07:53 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Sat, 28 Jul 2001 21:07:53 +0200 Subject: [Mplayer-users] Re: OT: videocards database In-Reply-To: <20010728171952.A5396@sci.fi> References: <20010728171952.A5396@sci.fi> Message-ID: <20010728210753.A32350@telia.com> Anssi Saari wrote: > I have an update to it however. For NVidia cards the open source "nv" > driver in XFree86 4.1.0 has Xvideo support. I don't think this is true for all NVidia cards. From the 4.1.0 release notes: * support for NVidia GeForce 3 * XvImage support for GeForce 3 chips Hopefully others will follow. (http://www.xfree86.org/4.1.0/RELNOTES2.html#3) -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From martin at bretschneidernet.de Sat Jul 28 20:59:55 2001 From: martin at bretschneidernet.de (Martin Bretschneider) Date: Sat, 28 Jul 2001 20:59:55 +0200 Subject: [Mplayer-users] some problems In-Reply-To: <200107272204.AAA33818@thot.banki.hu> References: <20010727235143.1ff9e5bb.martin@bretschneidernet.de> <200107272204.AAA33818@thot.banki.hu> Message-ID: <20010728205955.3a27a7b4.martin@bretschneidernet.de> moin moin Arpi! On Sat, 28 Jul 2001 00:04:37 +0200 (CEST) you were able to write: > current release is 0.18pre5, but it's old too, use CVS! I've tried it as desribed at the hp: cvs -z3 -d:pserver:anonymous at cvs.mplayer.sourceforge.net:/cvsroot/mplayer co main The have been downloaded. hen I wanted ./configure --enable-css --with-csslibdir=/opt/libcss/lib --with-cssincdir=/opt/libcss/include but it was returned ====================================================================== This MPlayer CVS tree is obsoloted! We have moved the CVS repository from SourceForge to our new server! ====================================================================== Checkout using -d:pserver:anonymous at mplayer.dev.hu:/cvsroot/mplayer Then I did it (with adjusted path): -d:pserver:anonymous at mplayer.dev.hu:/home/ich/cvsroot/mplayer bash: -d:pserver:anonymous at mplayer.dev.hu:/home/ich/cvsroot/mplayer: file or directory not found But it exists: ls -l /home/ich/cvsroot/mplayer insgesamt 7 drwxr-sr-x 18 ich ich 2120 28. Jul 20:12 main -rw-r--r-- 1 ich ich 29 28. Jul 20:17 update So what's wrong? [video turned around;] > known (limiattion of codecs), just read FAQ. > btw there are workarounds for it, for exampe it's ok with -vo sdl or -vo x11 I used x11 'cause vo doesn't work here (xfree 4.3 voodoo 3). >>2. I've got a film named "teaching mrs. tingle" that worked once >>with the 0.10pre10/22 but now: >>Encrypted VOB file (not compiled with libcss support)! Read file >>DOCS/DVD >> ==> Found audio stream: 16 >> {PTS_err:1} >but it plays the file, besides this warning message? No:( > if not, please upload this file. Where? I hope you can help me;) -- Where prejudice exists it always discolors our thoughts. (o_ When in doubt tell the truth. Mark Twain (o| //\ (o_. ' In order to verify the truth use gnupg. (o< //\ V_/_ //\c{} _O) Key-ID: 4EA52583 Regards, Martin (*_ //\ V_/, _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gabucino at k2.jozsef.kando.hu Sat Jul 28 21:19:17 2001 From: gabucino at k2.jozsef.kando.hu (Gabucino) Date: Sat, 28 Jul 2001 21:19:17 +0200 Subject: [Mplayer-users] some problems In-Reply-To: <20010728205955.3a27a7b4.martin@bretschneidernet.de>; from martin@bretschneidernet.de on Sat, Jul 28, 2001 at 08:59:55PM +0200 References: <20010727235143.1ff9e5bb.martin@bretschneidernet.de> <200107272204.AAA33818@thot.banki.hu> <20010728205955.3a27a7b4.martin@bretschneidernet.de> Message-ID: <20010728211917.A9447@woodstock.localdomain> It's the Question that drives us, Martin Bretschneider : > I've tried it as desribed at the hp: > cvs -z3 -d:pserver:anonymous at cvs.mplayer.sourceforge.net:/cvsroot/mplayer > co main You're watching the old homepage (I think it's mentioned in the News.. "Backup server...", etc) . The new page is at http://mplayerhq.hu > -d:pserver:anonymous at mplayer.dev.hu:/home/ich/cvsroot/mplayer > bash: -d:pserver:anonymous at mplayer.dev.hu:/home/ich/cvsroot/mplayer: file > or directory not found Eeh. > I hope you can help me;) As written in DOCS/BUGREPORTS. -- Gabucino -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available URL: From arpi at thot.banki.hu Sat Jul 28 21:19:25 2001 From: arpi at thot.banki.hu (Arpi) Date: Sat, 28 Jul 2001 21:19:25 +0200 (CEST) Subject: [Mplayer-users] some problems In-Reply-To: <20010728205955.3a27a7b4.martin@bretschneidernet.de> Message-ID: <200107281919.VAA25568@thot.banki.hu> Hi, > moin moin Arpi! > > On Sat, 28 Jul 2001 00:04:37 +0200 (CEST) you were able to write: > > > current release is 0.18pre5, but it's old too, use CVS! > > I've tried it as desribed at the hp: which hp? on the official hp is the mp.dev.hu address. > cvs -z3 -d:pserver:anonymous at cvs.mplayer.sourceforge.net:/cvsroot/mplayer > co main we moved away from SF some months ago. > Checkout using -d:pserver:anonymous at mplayer.dev.hu:/cvsroot/mplayer > > Then I did it (with adjusted path): > > -d:pserver:anonymous at mplayer.dev.hu:/home/ich/cvsroot/mplayer ^^^^^^^^^^ where is it coming from? it wasn't in the message printed by SF configure! it says: cvs -z3 -d:pserver:anonymous at cvs.mplayer.sourceforge.net:/cvsroot/mplayer co main please, don't be lamer... > bash: -d:pserver:anonymous at mplayer.dev.hu:/home/ich/cvsroot/mplayer: file > or directory not found > > But it exists: > > ls -l /home/ich/cvsroot/mplayer heh? -d specifies path _ON_THE_SERVER_ ! on the server, isn't /home/ich/ > So what's wrong? you. :) > [video turned around;] > > known (limiattion of codecs), just read FAQ. > > btw there are workarounds for it, for exampe it's ok with -vo sdl or > -vo x11 > > I used x11 'cause vo doesn't work here (xfree 4.3 voodoo 3). upgrade X (it's 4.0.3, not 4.3) > > if not, please upload this file. > > Where? RTFM DOCS/BUGREPORTS > I hope you can help me;) sorry, can't. i'm not a doctor... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From hlubek at physik.phy.tu-dresden.de Sat Jul 28 23:47:00 2001 From: hlubek at physik.phy.tu-dresden.de (Nikolai Hlubek) Date: Sat, 28 Jul 2001 23:47:00 +0200 Subject: [Mplayer-users] Video playback to fast Message-ID: <20010728234700.B1524@signum> Hi there. I have the following problem with Mplayer. I used to use the 0.17 version of Mplayer which worked great. Then I updated to 0.18 and also tried the recent snapshots but my videoplayback is way to fast. It has something to do with the sound sampling. When I start the video with -nosound everything is all right. (Doesn't depend on video type) The problem is mplayer always plays the video with 48kHz even if it is i.e. 11kHz which is detected correctly. Setting 11kHz manually doesn't work. Codecs.conf was replaced during the update. Thanks so far Nikolai. -- |- Escape the -| | Gates of hell. | Debian GNU/Linux | | http://www.debian.org |- Use Linux. -| _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sat Jul 28 21:52:08 2001 From: arpi at thot.banki.hu (Arpi) Date: Sat, 28 Jul 2001 21:52:08 +0200 (CEST) Subject: [Mplayer-users] microsoft & linux :) Message-ID: <200107281952.VAA54324@thot.banki.hu> Hi, check diz: ftp://mp.dev.hu/MPlayer/incoming/microsoft/ just found on the net. it's an old, early beta of m$ media player for linux :) it looks good (relative), but i couldn't play anything with that. avi: stream format not recognized asf: it opens, show infos about file, but i didn't find any file which has at least audio or video codec known by this stuff. (doc says it contains mpeg4, vivo h263 and truemotion 20 codecs) it has an 'software update' option, but it jumps to mediaplayer 7 for win2000 download page :) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sat Jul 28 21:53:19 2001 From: arpi at thot.banki.hu (Arpi) Date: Sat, 28 Jul 2001 21:53:19 +0200 (CEST) Subject: [Mplayer-users] Video playback to fast In-Reply-To: <20010728234700.B1524@signum> Message-ID: <200107281953.VAA33882@thot.banki.hu> Hi, > I have the following problem with Mplayer. > I used to use the 0.17 version of Mplayer which worked great. > Then I updated to 0.18 and also tried the recent snapshots but > my videoplayback is way to fast. > It has something to do with the sound sampling. > When I start the video with -nosound everything is all right. > (Doesn't depend on video type) > The problem is mplayer always plays the video with > 48kHz even if it is i.e. 11kHz which is detected correctly. > Setting 11kHz manually doesn't work. > Codecs.conf was replaced during the update. seems to be audio driver problem. please read DOCS/BUGREPORTS and send a full bugreport (including hw, kernel info, mplayer -v log etc) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lgb at lgb.hu Sat Jul 28 22:00:12 2001 From: lgb at lgb.hu (=?iso-8859-2?B?R+Fib3IgTOlu4XJ0?=) Date: Sat, 28 Jul 2001 22:00:12 +0200 Subject: [Mplayer-users] Video playback to fast In-Reply-To: <200107281953.VAA33882@thot.banki.hu> Message-ID: <20010728220012.D24503@vega.digitel2002.hu> On Sat, Jul 28, 2001 at 09:53:19PM +0200, Arpi wrote: > Hi, > > > I have the following problem with Mplayer. > > I used to use the 0.17 version of Mplayer which worked great. > > Then I updated to 0.18 and also tried the recent snapshots but > > my videoplayback is way to fast. > > It has something to do with the sound sampling. > > When I start the video with -nosound everything is all right. > > (Doesn't depend on video type) > > The problem is mplayer always plays the video with > > 48kHz even if it is i.e. 11kHz which is detected correctly. > > Setting 11kHz manually doesn't work. > > Codecs.conf was replaced during the update. > > seems to be audio driver problem. please read DOCS/BUGREPORTS > and send a full bugreport (including hw, kernel info, mplayer -v > log etc) Yeah. I had got similar problem on i810 system. The solution was: alsa 0.9 ... -- --[ G?bor L?n?rt ]---[ Vivendi Telecom Hungary ]---------[ lgb at lgb.hu ]-- U have 8 bit comp or chip of them and it's unused or to be sold? Call me! -------[ +36 30 2270823 ]------> LGB <-----[ Linux/UNIX/8bit 4ever ]----- _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From mgraffam at idsi.net Sat Jul 28 22:22:32 2001 From: mgraffam at idsi.net (mgraffam at idsi.net) Date: Sat, 28 Jul 2001 16:22:32 -0400 (EDT) Subject: [Mplayer-users] microsoft & linux :) In-Reply-To: <200107281952.VAA54324@thot.banki.hu> Message-ID: On Sat, 28 Jul 2001, Arpi wrote: > Hi, > > check diz: ftp://mp.dev.hu/MPlayer/incoming/microsoft/ > just found on the net. > > it's an old, early beta of m$ media player for linux :) Yeah, I saw this for the first time two years ago, or so. I used it to play ASF audio streams back then. It shows that, at one point at least, MS was going to support Linux with its free software. Until they decided that they had better not add fuel to the fire :) -- Michael Graffam (mgraffam at idsi.net) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From hlubek at physik.phy.tu-dresden.de Sun Jul 29 00:37:31 2001 From: hlubek at physik.phy.tu-dresden.de (Nikolai Hlubek) Date: Sun, 29 Jul 2001 00:37:31 +0200 Subject: [Mplayer-users] Video playback to fast In-Reply-To: <200107281953.VAA33882@thot.banki.hu> References: <200107281953.VAA33882@thot.banki.hu> Message-ID: <20010729003731.A2773@signum> Hi again. I didn't think it was a bug but thought I misconfigured something. But if you think it is a bug, here we go: System: Debian testing with 2.4.6 kernel. /lib/libc-2.2.3.so /lib/libc.so.5.4.46 XFree86 Version 4.0.3 gcc version 2.95.4 20010703 (Debian prerelease) GNU ld version 2.11.90.0.24 (with BFD 2.11.90.0.24) GNU assembler 2.11.90.0.24 Hardware: CPU AMD Duron(tm) Processor MHz : 597.997 Video card ELSA Gladiac chip: nVidia GeForce2 Sound card VT82C686A On-chip audio nikolai at signum:/usr/src/MPlayer-20010727 ./mplayer -v -vo x11 /mnt/hda7/Filme/Futurama/2ACV17.avi MPlayer 0.17cvs-010727-06:00(C) 2000-2001 Arpad Gereoffy CommandLine: '-v' '-vo' 'x11' '/mnt/hda7/Filme/Futurama/2ACV17.avi' Reading /home/nikolai/.mplayer/codecs.conf: 15 audio & 33 video codecs font: can't open file: /home/nikolai/.mplayer/font/font.desc font: can't open file: /usr/local/share/mplayer/font/font.desc Detected AVI file format! ======= AVI Header ======= us/frame: 40000 (fps=25.000) max bytes/sec: 0 padding: 0 flags: (272) HAS_INDEX IS_INTERLEAVED frames total: 32778 initial: 0 streams: 2 Suggested BufferSize: 0 Size: 320 x 240 ==> Found video stream: 0 ======= STREAM Header ======= Type: vids FCC: div4 (34766964) Flags: 0 Priority: 0 Language: 0 InitialFrames: 0 Rate: 1000000/40000 = 25.000 Start: 0 Len: 32778 Suggested BufferSize: 19709 Quality 10000 Sample size: 0 found 'bih', 40 bytes of 40 ==> Found audio stream: 1 ======= STREAM Header ======= Type: auds FCC: (0) Flags: 0 Priority: 0 Language: 0 InitialFrames: 1 Rate: 8010/372 = 21.532 Start: 0 Len: 28231 Suggested BufferSize: 3720 Quality 8500 Sample size: 372 found 'wf', 28 bytes of 20 ======= WAVE Format ======= Format Tag: 353 (0x161) Channels: 2 Samplerate: 44100 avg byte/sec: 8010 Block align: 372 bits/sample: 16 cbSize: 10 Found movie at 0x280C - 0x39D6344 Reading INDEX block, 61000 chunks for 32778 frames AVI index offset: 10248 Auto-selected AVI audio ID = 1 Auto-selected AVI video ID = 0 AVI: Searching for audio stream (id:1) AVI video length=60119729 VIDEO: [DIV3] 320x240 24bpp 25.00 fps 366.8 kbps (44.8 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:320x240 fps:25.00 ftime:=0.0400 Detected audio codec: [divx] drv:4 (DivX audio (WMA)) Initializing audio codec... ======= Win32 (ACM) AUDIO Codec init ======= Loading DLL: /usr/lib/win32/divxa32.acm OK Audio codec opened OK! ;-) Audio ACM output buffer min. size: 16384 Audio ACM input buffer min. size: 744 dec_audio: Allocating 16384 + 65536 = 81920 bytes for output buffer acm converted 372 -> 0 AUDIO: srate=44100 chans=2 bps=2 sfmt=0x10 ratio: 8010->176400 Detected video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) vo: X11 color mask: FFFF (R:F800 G:7E0 B:1F) vo: X11 running at 800x600 depth: 16 (":0.0" => local display) vo_debug: query(Packed YUY2) returned 0x0 vo_debug: query(BGR 32-bit) returned 0x0 vo_debug: query(BGR 24-bit) returned 0x0 vo_debug: query(BGR 16-bit) returned 0x1 vo_debug1: out_fmt=BGR 16-bit Loading DLL: /usr/lib/win32/divx_c32.ax OK Using DirectShow codec: divx_c32.ax INFO: Win32/DShow video codec init OK! VO: [x11] 320x240 => 320x240 BGR 16-bit VO: Description: X11 ( XImage/Shm ) VO: Author: Aaron Holtzman video_out->init(320x240->320x240,flags=0,'MPlayer',0x42475210) Sharing memory. INFO: Video OUT driver init OK! AO: [oss] 44100Hz Stereo Signed 16-bit (Little-Endian) AO: Description: OSS/ioctl audio output AO: Author: A'rpi ao2: 44100 Hz 2 chans Signed 16-bit (Little-Endian) audio_setup: using '/dev/dsp' dsp device audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian)) audio_setup: using 48000 Hz samplerate (requested: 44100) ^^^^^^^^ ^^^^^^ > I think this is the problem. audio_setup: frags: 32/32 (4096 bytes/frag) free: 131072 Initial frame delay A: 1 V: 0 AVI Initial frame delay: 0.040 START: a_pts=0.000 v_pts=0.000 Start playing... acm converted 1488 -> 32768 acm converted 1488 -> 32768 acm converted 1488 -> 32768 acm converted 1488 -> 32768 Initial PTS delay: -0.575 sec (calculated: -0.615) v: audio_delay=-0.615 buffer_delay=0.655 a.pts=0.040 v.pts=0.000 acm converted 372 -> 8192.0 A-V: 0.174 ct: 0.000 2 0% 0% 0.0% 0 acm converted 372 -> 8192 acm converted 372 -> 8192.0 A-V: 0.086 ct: 0.004 3 0% 0% 0.0% 0 ... Ok. Bye for now. Nikolai _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sat Jul 28 22:53:57 2001 From: arpi at thot.banki.hu (Arpi) Date: Sat, 28 Jul 2001 22:53:57 +0200 (CEST) Subject: [Mplayer-users] Video playback to fast In-Reply-To: <20010729003731.A2773@signum> Message-ID: <200107282053.WAA33880@thot.banki.hu> Hi, > audio_setup: using '/dev/dsp' dsp device > audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian)) > audio_setup: using 48000 Hz samplerate (requested: 44100) > ^^^^^^^^ ^^^^^^ yes, it's audio driver bug/fault/limitation. code from ao_oss.c: // set rate ao_samplerate=rate; ioctl (audio_fd, SNDCTL_DSP_SPEED, &ao_samplerate); printf("audio_setup: using %d Hz samplerate (requested: %d)\n",ao_samplerate,rate); so, i pass 44100 to audio driver ioctl(), but it returns that 48000 hz is set. (it happens usually if audio driver doesn't support requested rate) please contact writter of audio driver. or try to change driver. (oss<->alsa, driver version etc) i can't imagine that 0.17 ever worked with this driver & file. maybe try different audio drivers, -ao sdl, or if you have alsa 0.5, -ao alsa5 A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Sat Jul 28 23:04:13 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Sat, 28 Jul 2001 23:04:13 +0200 Subject: [Mplayer-users] some problems In-Reply-To: <200107281919.VAA25568@thot.banki.hu> References: <200107281919.VAA25568@thot.banki.hu> Message-ID: <20010728230413.A561@telia.com> Arpi wrote: > > I hope you can help me;) > sorry, can't. i'm not a doctor... I agree that this guy had made some misstakes, but what does being this rude gain anyone? To me it sounds like you're having a bad day Arpi. -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From hlubek at physik.phy.tu-dresden.de Sun Jul 29 01:30:16 2001 From: hlubek at physik.phy.tu-dresden.de (Nikolai Hlubek) Date: Sun, 29 Jul 2001 01:30:16 +0200 Subject: [Mplayer-users] Video playback to fast In-Reply-To: <200107282053.WAA33880@thot.banki.hu> References: <200107282053.WAA33880@thot.banki.hu> Message-ID: <20010729013016.A346@signum> Thanks for your help. I recently upgraded my kernel and mplayer and some other stuff. It seems the driver in the 2.4.6 kernel is broken. My old kernel (2.4.3) works flawlessly. All right, thanks again Nikolai. -- |- Escape the -| | Gates of hell. | Debian GNU/Linux | | http://www.debian.org |- Use Linux. -| _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 29 00:51:52 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 29 Jul 2001 00:51:52 +0200 Subject: [Mplayer-users] Maintaining movie acpect ratio in windowed mode, possible? In-Reply-To: References: Message-ID: <0107290051520D.15797@astral> On Saturday, 28. July 2001 20:46, you wrote: > Hi > > I was trying to find a feature that forces windows acpect ratio to remain > the same as the films when resizing window. Is there such a feature in > mplayer or am I just blind?-) currently only solution is -xy switch on commandline. > > - Juha Kuikka > -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 29 00:49:46 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 29 Jul 2001 00:49:46 +0200 Subject: [Mplayer-users] mp3lib problem In-Reply-To: References: Message-ID: <0107290049460C.15797@astral> On Saturday, 28. July 2001 16:58, you wrote: > Hi, > > Yesterday's modification of mp3lib does not work in my computer. When I > try to play a movie, I've got the following: > > mp3lib: Processor ID: 686 > mp3lib: Using SSE! optimized decore. > Illegal instruction (core dumped) > > If I use ./configure --disable-sse, everything works fine. But it worked > fine with SSE before. > please send a complete bugreport as written in DOCS/BUGREPORTS. Otherwise I can't debug it. > Sala -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 29 00:47:49 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 29 Jul 2001 00:47:49 +0200 Subject: [Mplayer-users] SDL -noxv problema In-Reply-To: References: Message-ID: <0107290047490B.15797@astral> On Saturday, 28. July 2001 15:55, you wrote: > Hi, > > I tried -vo sdl -noxv with several movies, and it works only for YUY2 > (divx decoded by windows dll), and not for YV12 (mpeg files, divx decoded > by ffdivx). Is it a known bug? I'm using SDL 1.2.0. No, I'll check it, what exact error do you get? It works fine here with SDL 1.2.1 cvs and mplayer cvs, with both avi and mpeg. > > Sala -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From erik.almqvist at home.se Sun Jul 29 09:44:04 2001 From: erik.almqvist at home.se (Erik Almqvist) Date: Sun, 29 Jul 2001 09:44:04 +0200 Subject: [Mplayer-users] divx brightness Message-ID: <20010729094404.20f53f49.erik.almqvist@home.se> My divx playback is very dark. How do I set brightness? Are there settings for contrasts etc as well? __________________________ Erik Almqist erik.almqvist at home.se http://ealm.dyndns.org:180 _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From misiek at pld.ORG.PL Sat Jul 28 00:02:54 2001 From: misiek at pld.ORG.PL (Arkadiusz Miskiewicz) Date: 28 Jul 2001 00:02:54 +0200 Subject: [Mplayer-users] Re: video card(s)? In-Reply-To: <7537779373.20010727182003@gmx.de> References: <3B61414D.7010900@nerd.dk> <20010727191424.A11786@sci.fi> <7537779373.20010727182003@gmx.de> Message-ID: <87u1zyf2sx.fsf@arm.t19.ds.pwr.wroc.pl> Felix Buenemann writes: > > If the Nvidia image quality weren't shit in 1600x1200, I'd be happy with > > it. Elsa Gladiac MX is the card in question, Geforce 2 MX with 32MB. > hmm, are you sure bad image quality in high res is due to Nvidia > card? It's rather due to linux drivers. I also have this problem. In 1600x1024 or 1600x1200 when using mplayer or avifile in window I get strange things (tm) on monitor (blinking lines on right of avifile/mplayer window). When I enlarge avifile window these lines disappear. This problem doesn't exist in M$ Windows (in these resolutions) or in lower resolution under X or in fullscreen. My hardware is TNT2 M64 with 32MB and Sony 17' G200. kernel 2.4.5, XFree 4.1.0, nvidia drivers 1251. > Maybe you should use a BNC cable to connect to your monitor, it has > much better quality then standard vga cable. I don't think that cable causes problems. > Felix mailto:atmosfear at users.sourceforge.net -- Arkadiusz Mi?kiewicz, AM2-6BONE, 1024/3DB19BBD IPv6 ready PLD Linux at http://www.pld.org.pl/ My jsme Borg. Odpor je marn?, budete asimilov?ni _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From asalamon at elender.hu Sun Jul 29 11:40:44 2001 From: asalamon at elender.hu (Andras Salamon) Date: Sun, 29 Jul 2001 11:40:44 +0200 (CEST) Subject: [Mplayer-users] SDL -noxv problema In-Reply-To: <0107290047490B.15797@astral> Message-ID: On Sun, 29 Jul 2001, Felix Buenemann wrote: > On Saturday, 28. July 2001 15:55, you wrote: > > Hi, > > > > I tried -vo sdl -noxv with several movies, and it works only for YUY2 > > (divx decoded by windows dll), and not for YV12 (mpeg files, divx decoded > > by ffdivx). Is it a known bug? I'm using SDL 1.2.0. > No, I'll check it, what exact error do you get? > The picture is black. No error messages. > It works fine here with SDL 1.2.1 cvs and mplayer cvs, with both avi and mpeg. > Maybe I'll upgrade SDL. > > > > Sala > > _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From asalamon at elender.hu Sun Jul 29 11:46:11 2001 From: asalamon at elender.hu (Andras Salamon) Date: Sun, 29 Jul 2001 11:46:11 +0200 (CEST) Subject: [Mplayer-users] mp3lib problem In-Reply-To: <0107290049460C.15797@astral> Message-ID: On Sun, 29 Jul 2001, Felix Buenemann wrote: > On Saturday, 28. July 2001 16:58, you wrote: > > Hi, > > > > Yesterday's modification of mp3lib does not work in my computer. When I > > try to play a movie, I've got the following: > > > > mp3lib: Processor ID: 686 > > mp3lib: Using SSE! optimized decore. > > Illegal instruction (core dumped) > > > > If I use ./configure --disable-sse, everything works fine. But it worked > > fine with SSE before. > > > > please send a complete bugreport as written in DOCS/BUGREPORTS. > Otherwise I can't debug it. > System info attached. mplayers output: ./mplayer /tmp/mpg/savethel.mpg -v MPlayer 0.17cvs-010728-16:32(C) 2000-2001 Arpad Gereoffy CommandLine: '/tmp/mpg/savethel.mpg' '-v' Reading /root/.mplayer/codecs.conf: 15 audio & 32 video codecs font: can't open file: /root/.mplayer/font/font.desc Font /usr/local/share/mplayer/font/font.desc loaded successfully! (495 chars) ASF_check: not ASF guid! system stream synced at 0xB (11)! ==> Found video stream: 0 Detected MPEG-PS file format! ==> Found audio stream: 0 Searching for sequence header... OK! mpeg2dec-0.2.0-release (C) 2000-2001 Aaron Holtzman & Michel Lespinasse libmpeg2: Using MMXEXT for IDCT transform libmpeg2: Using MMXEXT for motion compensation mpeg bitrate: 1200 (4B0) VIDEO: MPEG1 320x192 (aspect 1) 23.98 fps 600.0 kbps (75.0 kbyte/s) [V] filefmt:2 fourcc:0x10000001 size:320x192 fps:23.98 ftime:=0.0417 Detected audio codec: [mp3] drv:1 (MPEG layer-2, layer-3) Initializing audio codec... dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer mp3lib: Processor ID: 686 mp3lib: Using SSE! optimized decore. Illegal instruction (core dumped) > > Sala > > -------------- next part -------------- 1. The system info what we always want: - linux distribution Mandrake 7.2 (a few packages from 8.0) - kernel version: 2.4.0 - libc version: 2.2 - X version: 4.1.0 - gcc and ld version: 2.95.3 2.10.90 - binutils version: 2.10.90 2. Hardware & drivers: - CPU info: cat /proc/cpuinfo: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Celeron (Coppermine) stepping : 6 cpu MHz : 798.657 cache size : 128 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1595.80 - video card manufacturer and model examples: ASUS V3800M chip: nVidia TNT2 (M64) 32MB - video driver type&version nvidia 1.0-1251 - sound card type & driver GUS PnP with ALSA (0.5.10) OSS emulation From asalamon at elender.hu Sun Jul 29 12:05:02 2001 From: asalamon at elender.hu (Andras Salamon) Date: Sun, 29 Jul 2001 12:05:02 +0200 (CEST) Subject: [Mplayer-users] mp3lib problem In-Reply-To: Message-ID: On Sun, 29 Jul 2001, Andras Salamon wrote: > On Sun, 29 Jul 2001, Felix Buenemann wrote: > > > On Saturday, 28. July 2001 16:58, you wrote: > > > Hi, > > > > > > Yesterday's modification of mp3lib does not work in my computer. When I > > > try to play a movie, I've got the following: > > > > > > mp3lib: Processor ID: 686 > > > mp3lib: Using SSE! optimized decore. > > > Illegal instruction (core dumped) > > > > > > If I use ./configure --disable-sse, everything works fine. But it worked > > > fine with SSE before. > > > > > The new version of configure checks for kernel extensions, and says I have no SSE. It means that mplayer compiles without SSE, and the program works correctly. But how is it possible that before it was working with SSE? And what's the problem with my SSE (Kernel 2.4.0 CPU: Celeron 800)? Sala _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jk at tools.de Sun Jul 29 12:22:03 2001 From: jk at tools.de (Juergen Keil) Date: Sun, 29 Jul 2001 12:22:03 +0200 (MEST) Subject: [Mplayer-users] segfault Message-ID: <200107291022.f6TAM2600593@leo.tools.intra> > > Does *not* crash here: > > under linux or solaris or bsd? Finally, it did crash on a linux box at home, when I was logged in on a gnome desktop. The problem is with the way the DLLs implements alloca() and try to extend the stack (?); there was a subroutine named "This_Is_Dirty_Hack()" that worked around this problem and which was disabled by my win32 __stdcall prototype patch. The problem should be fixed no in the current CVS. Is the Ann Lee .asf playback working for you, now? -- J?rgen Keil jk at tools.de Tools GmbH +49 (228) 9858011 _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From cyrax at nerd.dk Sun Jul 29 12:30:24 2001 From: cyrax at nerd.dk (Mark =?ISO-8859-1?Q?Gj=F8l?=) Date: Sun, 29 Jul 2001 12:30:24 +0200 Subject: [Mplayer-users] Maintaining movie acpect ratio in windowed mode, possible? References: <0107290051520D.15797@astral> Message-ID: <3B63E5C0.1090306@nerd.dk> Felix Buenemann wrote: >On Saturday, 28. July 2001 20:46, you wrote: > >>Hi >> >>I was trying to find a feature that forces windows acpect ratio to remain >>the same as the films when resizing window. Is there such a feature in >>mplayer or am I just blind?-) >> >currently only solution is -xy switch on commandline. > Using the -xy you still have to calculate the aspect ratio manually... Rite? A feature like -zoom would be nice, but it would be better if you could resize while watching the movie like Windows media player (If you don't know what WMP does: If you resize the window then WMP keeps the movie aspect ratio inside the border). A feature where you could zoom in-movie would be as good. I doubt it anyone enjoys watching movies with a wrong aspect ratio :P // Mark > >>- Juha Kuikka >> _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From as at sci.fi Sun Jul 29 12:50:17 2001 From: as at sci.fi (Anssi Saari) Date: Sun, 29 Jul 2001 13:50:17 +0300 Subject: [Mplayer-users] Re: OT: videocards database In-Reply-To: <20010728210753.A32350@telia.com>; from andre.dahlqvist@telia.com on Sat, Jul 28, 2001 at 09:07:53PM +0200 References: <20010728171952.A5396@sci.fi> <20010728210753.A32350@telia.com> Message-ID: <20010729135017.A6817@sci.fi> On Sat, Jul 28, 2001 at 09:07:53PM +0200, Andr? Dahlqvist wrote: > Anssi Saari wrote: > > > I have an update to it however. For NVidia cards the open source "nv" > > driver in XFree86 4.1.0 has Xvideo support. > > I don't think this is true for all NVidia cards. From the 4.1.0 release > notes: Well, maybe it works by accident with my Geforce 2 MX? Or the release notes are rubbish... _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From as at sci.fi Sun Jul 29 13:03:12 2001 From: as at sci.fi (Anssi Saari) Date: Sun, 29 Jul 2001 14:03:12 +0300 Subject: [Mplayer-users] Re: segfault In-Reply-To: <200107291022.f6TAM2600593@leo.tools.intra>; from jk@tools.de on Sun, Jul 29, 2001 at 12:22:03PM +0200 References: <200107291022.f6TAM2600593@leo.tools.intra> Message-ID: <20010729140312.B6817@sci.fi> On Sun, Jul 29, 2001 at 12:22:03PM +0200, Juergen Keil wrote: > The problem should be fixed no in the current CVS. Is the Ann Lee .asf > playback working for you, now? Works for me now, at least. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 29 14:13:18 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 29 Jul 2001 14:13:18 +0200 (CEST) Subject: [Mplayer-users] SDL -noxv problema In-Reply-To: Message-ID: <200107291213.OAA14736@thot.banki.hu> Hi, > On Sun, 29 Jul 2001, Felix Buenemann wrote: > > > On Saturday, 28. July 2001 15:55, you wrote: > > > Hi, > > > > > > I tried -vo sdl -noxv with several movies, and it works only for YUY2 > > > (divx decoded by windows dll), and not for YV12 (mpeg files, divx decoded > > > by ffdivx). Is it a known bug? I'm using SDL 1.2.0. > > No, I'll check it, what exact error do you get? > > > > The picture is black. No error messages. > I think it's the gcc 2.96 problem then... (see DOCS/BUGS, black image with mpeg) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 29 14:24:48 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 29 Jul 2001 14:24:48 +0200 (CEST) Subject: [Mplayer-users] mp3lib problem In-Reply-To: Message-ID: <200107291224.OAA46152@thot.banki.hu> Hi, for the YV12-black image problem: > System info attached. > > Mandrake 7.2 (a few packages from 8.0) i think, you have SDL and/or nasm from mandrake 8. nasm in new mandrake is compiled with gcc 2.96, which is buggy, so the resulting nasm creates buggy code. SDL compilation requires nasm, and if you compile SDL with this buggy nasm, it will fail with YV12 and aalib. It's a very strange and funny bug, discovered by havner, i think. you should drop those from 8.0, and compile them from source, with gcc 2.95.x! A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 29 14:30:01 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 29 Jul 2001 14:30:01 +0200 (CEST) Subject: [Mplayer-users] segfault In-Reply-To: <200107291022.f6TAM2600593@leo.tools.intra> Message-ID: <200107291230.OAA46440@thot.banki.hu> Hi, > > > Does *not* crash here: > > > > under linux or solaris or bsd? > > Finally, it did crash on a linux box at home, when I was logged in on a > gnome desktop. > > The problem is with the way the DLLs implements alloca() and try to extend > the stack (?); there was a subroutine named "This_Is_Dirty_Hack()" that > worked around this problem and which was disabled by my win32 __stdcall > prototype patch. Ehh. The evil m$ programmers always find something to make things less portable. > The problem should be fixed no in the current CVS. Is the Ann Lee .asf > playback working for you, now? > Yes, works for me too! Good work! Btw it's nice, 44khz stereo audio in 16kbit... and sound is recognizable :) So, isn't it true, that divx audio codec works only at 64kbit ? A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Thu Jul 26 15:20:12 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Thu, 26 Jul 2001 15:20:12 +0200 Subject: [Mplayer-users] Real Benchmarking Message-ID: <200107261320.f6QDKDu01127@alison.hemmet.chalmers.se> Hi Arpi, since you included this great benchmarking option a while ago and everybody keeps talking about how fast his CPU and/or video card is with which version of what, how about putting a few (legal) reference files for benchmarking on the FTP? Say, one MPEG1 (low res, low bitrate), one MPEG2 (high res, high bitrate), one DivX-AVI (low,low), one DivX-AVI (high, high). Or take MPEG4 instead of DivX, whatever. That way, the posted numbers would at least be a little bit comparible and I DOCS/SPEED will be less... well... non-comparible. gruel -- Christoph Lampert, gruel at gmx.de "Linux is a cancer that attaches itself in an intellectual property sense to everything it touches. That's the way that the license works." - Steve Balmer "Epsilon < 0" - chl _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Fri Jul 27 18:42:30 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Fri, 27 Jul 2001 18:42:30 +0200 Subject: [Mplayer-users] Mailing list suggestions In-Reply-To: <7537779373.20010727182003@gmx.de> References: <20010727191424.A11786@sci.fi> <7537779373.20010727182003@gmx.de> Message-ID: <200107271642.f6RGgVs06226@alison.hemmet.chalmers.se> Hi, how about this: A'rpi could create a new mailing list, mplayer-general, or mplayer-talk Then whenever a discussion leaves the topic of mplayer (like 9 out of 10 mails did during the last days) and switches to something else, still interesting (like 8 out of 10 mails were during the last days), the thread can be moved over there. mplayer-users would be real mplayer stuff, with much less traffic than now, mplayer-whatever would be additional for the "regular guys", or for those who don't care if traffic gets high. Maybe it's just the summer, but I can understand people who cancel subscription... gruel _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 29 14:39:16 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 29 Jul 2001 14:39:16 +0200 (CEST) Subject: [Mplayer-users] Mailing list suggestions In-Reply-To: <200107271642.f6RGgVs06226@alison.hemmet.chalmers.se> Message-ID: <200107291239.OAA60002@thot.banki.hu> Hi, > A'rpi could create a new mailing list, mplayer-general, or mplayer-talk > > Then whenever a discussion leaves the topic of mplayer (like 9 out of 10 > mails did during the last days) and switches to something else, still > interesting (like 8 out of 10 mails were during the last days), the thread > can be moved over there. There is already such list, called mplayer-flame :) But nobody subscribed there :) (yes, it was really a test list for new maillist server, but it works) > mplayer-users would be real mplayer stuff, with much less traffic than now, > mplayer-whatever would be additional for the "regular guys", or for those who > don't care if traffic gets high. Good idea, but usually it doesn't work. People keep replying to the old mail which has Reply-to: pointing to -users list. I think that -users list is for such general discussions. Maybe we should create an mplayer-bugs list, for those who want to report bug and waiting for teh solution. It saves -users list from system info and log attachments, but stop users from answering to the bug reporter if they know any solution or workaround. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Sun Jul 29 14:51:05 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Sun, 29 Jul 2001 14:51:05 +0200 Subject: [Mplayer-users] Mailing list suggestions In-Reply-To: <200107291239.OAA60002@thot.banki.hu> References: <200107291239.OAA60002@thot.banki.hu> Message-ID: <200107291251.f6TCp5h01416@alison.hemmet.chalmers.se> Am Sonntag, 29. Juli 2001 14:39 schrieben Sie: > > mplayer-users would be real mplayer stuff, with much less traffic than > > now, mplayer-whatever would be additional for the "regular guys", or for > > those who don't care if traffic gets high. > > Good idea, but usually it doesn't work. > People keep replying to the old mail which has Reply-to: pointing to -users > list. Yes, but after a while somebody might notice that it's offtopic and take the five seconds to change that line. After that it's moved to the other list and everybody can reply again... > I think that -users list is for such general discussions. > Maybe we should create an mplayer-bugs list, for those who want to > report bug and waiting for teh solution. It saves -users list from > system info and log attachments, but stop users from answering to > the bug reporter if they know any solution or workaround. MPlayer-bugs is a good idea, too. But I doubt that Mplayer-users is for discussion of which graphics card is best for Linux. At least I would not expect this when subscribing. gruel -- Christoph Lampert, gruel at gmx.de "Linux is a cancer that attaches itself in an intellectual property sense to everything it touches. That's the way that the license works." - Steve Balmer "Epsilon < 0" - chl _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From _bil_ at mail.ru Sun Jul 29 15:30:59 2001 From: _bil_ at mail.ru (Billy) Date: Sun, 29 Jul 2001 17:30:59 +0400 Subject: [Mplayer-users] farmedrops Message-ID: How to get rid of this shity framedrops on good quality movie....? Whan i start movie without sound i plays perfectly. My system is : amd k6-2 350 128M Geforce2MX with nvidia binary shit %( And the second question: What difference between -vo dga and -vo sdl:dga? And which -vo is fastest? billy at billy 17:24:23 main$ mplayer /opt/Arabian_Nights_1.avi MPlayer 0.17cvs-010729-11:56(C) 2000-2001 Arpad Gereoffy Reading /home/billy/.mplayer/codecs.conf: 15 audio & 32 video codecs Font /home/billy/.mplayer/font/font.desc loaded successfully! (495 chars) Detected AVI file format! ==> Found video stream: 0 ==> Found audio stream: 1 VIDEO: [DIV3] 576x432 24bpp 25.00 fps 969.9 kbps (118.4 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:576x432 fps:25.00 ftime:=0.0400 Detected audio codec: [mp3] drv:1 (MPEG layer-2, layer-3) dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer mp3lib: Processor ID: 58c mp3lib: Using AMD 3dnow! optimized decore. AUDIO: srate=48000 chans=2 bps=2 sfmt=0x10 ratio: 12000->192000 Detected video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) vo: X11 color mask: FFFFFF (R:FF0000 G:FF00 B:FF) vo: X11 running at 1024x768 depth: 32 ("unix:0.0" => remote display) vo_dga: Mode: depth=15, bpp=16, r=007c00, g=0003e0, b=00001f, native (fast), (-bpp 15) ...disabled by -bpp 16 vo_dga: Mode: depth=16, bpp=16, r=00f800, g=0007e0, b=00001f, native (fast), (-bpp 16) vo_dga: Mode: depth=24, bpp=24, r=ff0000, g=00ff00, b=0000ff, conversion (slow), (-bpp 24) ...disabled by -bpp 16 vo_dga: Mode: depth=24, bpp=32, r=ff0000, g=00ff00, b=0000ff, native (fast), (-bpp 32) ...disabled by -bpp 16 Loading DLL: /usr/lib/win32/divx_c32.ax OK Using DirectShow codec: divx_c32.ax VO: [dga] 576x432 => 0x0 BGR 16-bit vm VO: Description: DGA ( Direct Graphic Access V2.0 ) VO: Author: Andreas Ackermann vo_dga: DGA 2.0 available :-) Can switch resolution AND depth! vo_dga: Selected hardware mode 640 x 480 @ 85 Hz @ depth 16, bitspp 16. vo_dga: Video parameters by codec: 576 x 432, depth 16, bitspp 16. vo_dga: Clearing framebuffer (737280 bytes). If mplayer exits here, you haven't enough memory on your card. vo_dga: Doublebuffering is disabled. Terminal type `rxvt' is not defined. AO: [oss] 48000Hz Stereo Signed 16-bit (Little-Endian) AO: Description: OSS/ioctl audio output AO: Author: A'rpi ao2: 48000 Hz 2 chans Signed 16-bit (Little-Endian) audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian)) audio_setup: using 48000 Hz samplerate (requested: 48000) audio_setup: frags: 8/8 (4096 bytes/frag) free: 32768 Start playing... Initial PTS delay: -0.251 sec (calculated: -0.051) A: 9.1 ( 9.4) V: 9.6 A-V: -0.280 ct: 0.240 242 88% 2% 5.5% 231 Exiting... (Quit) billy at billy 17:26:34 main$ _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Sun Jul 29 17:16:58 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Sun, 29 Jul 2001 17:16:58 +0200 Subject: [Mplayer-users] farmedrops In-Reply-To: References: Message-ID: <200107291517.f6TFH0e07754@alison.hemmet.chalmers.se> Am Sonntag, 29. Juli 2001 15:30 schrieben Sie: > How to get rid of this shity framedrops on good quality movie....? > My system is : > amd k6-2 350 > 128M > Geforce2MX with nvidia binary shit %( Buy yourself a faster system! > Whan i start movie without sound i plays perfectly. I doubt that. But even better if it's true. However, audio costs time as well... gruel _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From falk at lunat23.de Sun Jul 29 17:50:12 2001 From: falk at lunat23.de (Falk Schubert) Date: Sun, 29 Jul 2001 17:50:12 +0200 Subject: [Mplayer-users] libac3 and sse In-Reply-To: <200107272043.WAA48842@thot.banki.hu> References: <16135411018.20010727174035@gmx.de> <200107272043.WAA48842@thot.banki.hu> Message-ID: <20010729175012.0baadb4c.falk@lunat23.de> Now that's strange...I patched my kernel sources to enable SSE and compiled and now I can compile mplayer successfully with SSE enabled and it works;) Sound and video are working, however it's still more or less a slide show;( Now you said that ac3 is heavily using SSE, so playback should be faster right? Now I tried out different audio outputs...I switched from oss to sdl and now the playback is almost fluent (just a few milliseconds slower than mp3 audio encoded movies)...why does this audio output change the speed that much? Can it be that ac3 is heavy cpu loading and therefore slower than mp3 audio movies? And that's why changing the output can increase playback speed? Thanks falk PS: I tried out xmmp and xmps .... I decided I am staying with mplayer;) Just another question: What makes the picture quality of mplayer that much better than avifile? I compared Armageddon (video:divx (1.4GB of size) with mp3 sound) and just paied attention on heavily changing scenes like explosions...in avifile they tend to show huge blocks in the fire and explosions (low resolution)....this was bugging me so I tried out a different encoder, that dynamically adapts the resolution when encoding from dvd to divx....but still I see worse quality watching these scenes....however using mplayer the quality improves somewhat... -- enjoy your day! Falk Schubert Joellenbeckerstr. 287 33613 Bielefeld _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Sun Jul 29 18:35:49 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Sun, 29 Jul 2001 18:35:49 +0200 Subject: [Mplayer-users] Mailing list suggestions In-Reply-To: <200107271642.f6RGgVs06226@alison.hemmet.chalmers.se> References: <20010727191424.A11786@sci.fi> <7537779373.20010727182003@gmx.de> <200107271642.f6RGgVs06226@alison.hemmet.chalmers.se> Message-ID: <20010729183549.A9637@telia.com> Christoph H. Lampert wrote: > Then whenever a discussion leaves the topic of mplayer (like 9 out of 10 > mails did during the last days) and switches to something else, still > interesting (like 8 out of 10 mails were during the last days), the thread > can be moved over there. How about an official IRC channel for mplayer? #mplayer on openprojects perhaps? -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From _bil_ at mail.ru Sun Jul 29 18:52:07 2001 From: _bil_ at mail.ru (Billy) Date: Sun, 29 Jul 2001 20:52:07 +0400 Subject: [Mplayer-users] farmedrops In-Reply-To: <200107291517.f6TFH0e07754@alison.hemmet.chalmers.se> References: <200107291517.f6TFH0e07754@alison.hemmet.chalmers.se> Message-ID: Sun, 29 Jul 2001 17:16:58 +0200 "Christoph H. Lampert" ?????: > Am Sonntag, 29. Juli 2001 15:30 schrieben Sie: >> How to get rid of this shity framedrops on good quality movie....? >> My system is : >> amd k6-2 350 >> 128M >> Geforce2MX with nvidia binary shit %( > Buy yourself a faster system! Yea i'm going to.... $) >> Whan i start movie without sound i plays perfectly. > I doubt that. But even better if it's true. However, audio costs time as > > well... Yea and there is no framedrops due lack of syncronisation.... > gruel > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 29 18:39:05 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 29 Jul 2001 18:39:05 +0200 (CEST) Subject: [Mplayer-users] Mailing list suggestions In-Reply-To: <20010729183549.A9637@telia.com> Message-ID: <200107291639.SAA19102@thot.banki.hu> Hi, > Christoph H. Lampert wrote: > > > Then whenever a discussion leaves the topic of mplayer (like 9 out of 10 > > mails did during the last days) and switches to something else, still > > interesting (like 8 out of 10 mails were during the last days), the thread > > can be moved over there. > > How about an official IRC channel for mplayer? #mplayer on openprojects > perhaps? we have #mplayer on IrcNet, but it's for developers only. we DO NOT answer support questsions there. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Sun Jul 29 19:07:35 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Sun, 29 Jul 2001 19:07:35 +0200 (MET DST) Subject: [Mplayer-users] libac3 and sse In-Reply-To: <20010729175012.0baadb4c.falk@lunat23.de> Message-ID: On Sun, 29 Jul 2001, Falk Schubert wrote: > Just another question: What makes the picture quality of mplayer that much > better than avifile? I compared Armageddon (video:divx (1.4GB of size) > with mp3 sound) and just paied attention on heavily changing scenes like > explosions...in avifile they tend to show huge blocks in the fire and > explosions (low resolution)....this was bugging me so I tried out a > different encoder, that dynamically adapts the resolution when encoding > from dvd to divx....but still I see worse quality watching these > scenes....however using mplayer the quality improves somewhat... Aha! Maybe you enable postprocessing (option -pp)? To a high value like 4? That slows everything down very much, maybe that's the reason for the "slideshow". gruel _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From martin at bretschneidernet.de Sun Jul 29 19:32:26 2001 From: martin at bretschneidernet.de (Martin Bretschneider) Date: Sun, 29 Jul 2001 19:32:26 +0200 Subject: [Mplayer-users] some problems In-Reply-To: <20010728230413.A561@telia.com> References: <200107281919.VAA25568@thot.banki.hu> <20010728230413.A561@telia.com> Message-ID: <20010729193226.0253b106.martin@bretschneidernet.de> moin moin Andr?! On Sat, 28 Jul 2001 23:04:13 +0200 you were able to write: > Arpi wrote: > > > > I hope you can help me;) > > sorry, can't. i'm not a doctor... > > I agree that this guy had made some misstakes, but what does being this > rude gain anyone? Thank you for defending me. But I've done really some stupid things (BTW: you can make a redirct to the real hp - the "backup..."-messages was there for some time, so I thought it has sth to with the sourceforge-server-problems...). Now I donwloaded the recent cvs, the libcss and compiled both (but libcss first;). But now I get a error: ich at bretschneidernet:/cdrom$ mplayer -vo xv * mplayer: error while loading shared libraries: libcss.so.0: cannot open shared object file: No such file or directory Ok, I compiled mplayer like it's it told in the DVD-doc: ./configure --enable-css --with-csslibdir=/usr/local/lib --with-cssincdir=/usr/local/include and the mplayer-configure says I'm right: [...] Checking for DeCSS support ... yes [...] Extra libs : -L/usr/local/lib Extra headers : -I/usr/local/include [...] I also checked ls -l /usr/local/lib/libcss.so.0.1.0 -rwxr-xr-x 1 root staff 113306 28. Jul 22:53 /usr/local/lib/libcss.so.0.1.0 Seems to be OK as well, so what have done wrong now?;) > To me it sounds like you're having a bad day Arpi. Perhaps Arpi has hacked mplayer to much;) -- Where prejudice exists it always discolors our thoughts. (o_ When in doubt tell the truth. Mark Twain (o| //\ (o_. ' In order to verify the truth use gnupg. (o< //\ V_/_ //\c{} _O) Key-ID: 4EA52583 Regards, Martin (*_ //\ V_/, _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Sun Jul 29 19:45:52 2001 From: arpi at thot.banki.hu (Arpi) Date: Sun, 29 Jul 2001 19:45:52 +0200 (CEST) Subject: [Mplayer-users] some problems In-Reply-To: <20010729193226.0253b106.martin@bretschneidernet.de> Message-ID: <200107291745.TAA30774@thot.banki.hu> Hi, > Thank you for defending me. But I've done really some stupid things (BTW: > you can make a redirct to the real hp - the "backup..."-messages was there > for some time, so I thought it has sth to with the > sourceforge-server-problems...). It is redirected. just type http://mplayer.sourceforge.net into your browser, and you will land at http://mplayer.dev.hu maybe you bookmarked exact url of any html file... > Now I donwloaded the recent cvs, the libcss and compiled both (but libcss > first;). But now I get a error: > > ich at bretschneidernet:/cdrom$ mplayer -vo xv * > mplayer: error while loading shared libraries: libcss.so.0: cannot open > shared object file: No such file or directory did you run 'ldconfig' ? do you have /usr/local/bin in your /etc/ld.so.conf ? > > To me it sounds like you're having a bad day Arpi. > > Perhaps Arpi has hacked mplayer to much;) just read too many silly questions on the mailing lists and private... we really should set up a helpdesk/support service. including mail, irc, 24h hotline phone etc... :) Andr?, don't you want to help us with this? (so you do something usefull...) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 29 19:54:25 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 29 Jul 2001 19:54:25 +0200 Subject: [Mplayer-users] divx brightness In-Reply-To: <20010729094404.20f53f49.erik.almqvist@home.se> References: <20010729094404.20f53f49.erik.almqvist@home.se> Message-ID: <17334413163.20010729195425@gmx.de> Hello Erik, Sunday, July 29, 2001, 9:44:04 AM, you wrote: > My divx playback is very dark. > How do I set brightness? > Are there settings for contrasts etc as well? there are, potentionally, but code was never used in mplayer. Look at the commented out code in older mplayer.c (moved to dec_video.c and removed unused stuff nowadays.) -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 29 19:59:14 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 29 Jul 2001 19:59:14 +0200 Subject: [Mplayer-users] mp3lib problem In-Reply-To: References: Message-ID: <034702549.20010729195914@gmx.de> Hello Andras, Sunday, July 29, 2001, 11:46:11 AM, you wrote: > On Sun, 29 Jul 2001, Felix Buenemann wrote: >> On Saturday, 28. July 2001 16:58, you wrote: >> > Hi, >> > >> > Yesterday's modification of mp3lib does not work in my computer. When I >> > try to play a movie, I've got the following: >> > >> > mp3lib: Processor ID: 686 >> > mp3lib: Using SSE! optimized decore. >> > Illegal instruction (core dumped) >> > >> > If I use ./configure --disable-sse, everything works fine. But it worked >> > fine with SSE before. >> > >> >> please send a complete bugreport as written in DOCS/BUGREPORTS. >> Otherwise I can't debug it. >> > System info attached. yea, but you missed the GDB debugging session (do stuff written in DOCS/BUGREPORTS with gdb) > mplayers output: > ./mplayer /tmp/mpg/savethel.mpg -v [snip] >> > Sala >> >> -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 29 20:01:21 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 29 Jul 2001 20:01:21 +0200 Subject: [Mplayer-users] mp3lib problem In-Reply-To: References: Message-ID: <634829482.20010729200121@gmx.de> Hello Andras, Sunday, July 29, 2001, 12:05:02 PM, you wrote: > On Sun, 29 Jul 2001, Andras Salamon wrote: >> On Sun, 29 Jul 2001, Felix Buenemann wrote: >> >> > On Saturday, 28. July 2001 16:58, you wrote: >> > > Hi, >> > > >> > > Yesterday's modification of mp3lib does not work in my computer. When I >> > > try to play a movie, I've got the following: >> > > >> > > mp3lib: Processor ID: 686 >> > > mp3lib: Using SSE! optimized decore. >> > > Illegal instruction (core dumped) >> > > >> > > If I use ./configure --disable-sse, everything works fine. But it worked >> > > fine with SSE before. >> > > >> > > The new version of configure checks for kernel extensions, and says I have > no SSE. It means that mplayer compiles without SSE, and the program works > correctly. > But how is it possible that before it was working with SSE? And what's the > problem with my SSE (Kernel 2.4.0 CPU: Celeron 800)? It means that something is wrong with SSE support in yopur kernel, try upgrading. Older mp3lib didn't use sse code and in fastmemcpy ssecode was also disabled, so only ssecode stayed in libac3, which you won_'t recognice unless you play avi with ac3 sound or dvd. > Sala -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 29 20:07:20 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 29 Jul 2001 20:07:20 +0200 Subject: [Mplayer-users] segfault In-Reply-To: <200107291230.OAA46440@thot.banki.hu> References: <200107291230.OAA46440@thot.banki.hu> Message-ID: <18435188207.20010729200720@gmx.de> Hello Arpi, Sunday, July 29, 2001, 2:30:01 PM, you wrote: > Hi, >> > > Does *not* crash here: >> > >> > under linux or solaris or bsd? >> >> Finally, it did crash on a linux box at home, when I was logged in on a >> gnome desktop. >> >> The problem is with the way the DLLs implements alloca() and try to extend >> the stack (?); there was a subroutine named "This_Is_Dirty_Hack()" that >> worked around this problem and which was disabled by my win32 __stdcall >> prototype patch. > Ehh. > The evil m$ programmers always find something to make things less portable. >> The problem should be fixed no in the current CVS. Is the Ann Lee .asf >> playback working for you, now? >> > Yes, works for me too! Good work! > Btw it's nice, 44khz stereo audio in 16kbit... and sound is recognizable :) > So, isn't it true, that divx audio codec works only at 64kbit ? no, there are several suggested bitrates for use with video (others could cause sync probs). > A'rpi / Astral & ESP-team -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From martin at bretschneidernet.de Sun Jul 29 20:43:06 2001 From: martin at bretschneidernet.de (Martin Bretschneider) Date: Sun, 29 Jul 2001 20:43:06 +0200 Subject: [Mplayer-users] some problems In-Reply-To: <200107291745.TAA30774@thot.banki.hu> References: <20010729193226.0253b106.martin@bretschneidernet.de> <200107291745.TAA30774@thot.banki.hu> Message-ID: <20010729204306.179511a3.martin@bretschneidernet.de> moin moin Arpi! On Sun, 29 Jul 2001 19:45:52 +0200 (CEST) you were able to write: > It is redirected. > just type http://mplayer.sourceforge.net into your browser, and > you will land at http://mplayer.dev.hu > > maybe you bookmarked exact url of any html file... Yes indeed, argh... > > Now I donwloaded the recent cvs, the libcss and compiled both (but libcss > > first;). But now I get a error: > > > > ich at bretschneidernet:/cdrom$ mplayer -vo xv * > > mplayer: error while loading shared libraries: libcss.so.0: cannot >>open shared object file: No such file or directory > > did you run 'ldconfig' ? do you have /usr/local/bin in your /etc/ld.so.conf ? No, but it doesn't changes anything... May I write a bugreport? > > > To me it sounds like you're having a bad day Arpi. > > > > Perhaps Arpi has hacked mplayer to much;) > > just read too many silly questions on the mailing lists and private... ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I'm sorry if it was me:( > we really should set up a helpdesk/support service. > including mail, irc, 24h hotline phone etc... :) ^^^^ ^^^ Well, I think you have already done it. But you needn't reply all questions within few minutes. There are (perhaps?) some other guys around the world and so at any time there's anyone awake;) -- Where prejudice exists it always discolors our thoughts. (o_ When in doubt tell the truth. Mark Twain (o| //\ (o_. ' In order to verify the truth use gnupg. (o< //\ V_/_ //\c{} _O) Key-ID: 4EA52583 Regards, Martin (*_ //\ V_/, _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 29 20:56:56 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 29 Jul 2001 20:56:56 +0200 Subject: [Mplayer-users] farmedrops In-Reply-To: References: Message-ID: <1138163726.20010729205656@gmx.de> Hello Billy, Sunday, July 29, 2001, 3:30:59 PM, you wrote: > How to get rid of this shity framedrops on good quality movie....? > Whan i start movie without sound i plays perfectly. > My system is : > amd k6-2 350 > 128M > Geforce2MX with nvidia binary shit %( Try overclocking your system to 400MHz or so :) > And the second question: > What difference between -vo dga and -vo sdl:dga? > And which -vo is fastest? -vo sdl:dga is the dga driver from SDLlib, but it's slower then -vo dga, -vo xv is the fastest, why don't you use it? [snip] -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 29 21:07:30 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 29 Jul 2001 21:07:30 +0200 Subject: [Mplayer-users] libac3 and sse In-Reply-To: <20010729175012.0baadb4c.falk@lunat23.de> References: <16135411018.20010727174035@gmx.de> <200107272043.WAA48842@thot.banki.hu> <20010729175012.0baadb4c.falk@lunat23.de> Message-ID: <11538797888.20010729210730@gmx.de> Hello Falk, Sunday, July 29, 2001, 5:50:12 PM, you wrote: > Now that's strange...I patched my kernel sources to enable SSE and > compiled and now I can compile mplayer successfully with SSE enabled and > it works;) Sound and > video are working, however it's still more or less a slide show;( Now you > said that ac3 is heavily using SSE, so playback should be faster right? > Now I tried out different audio outputs...I switched from oss to sdl and > now the playback is almost fluent (just a few milliseconds slower than mp3 > audio encoded movies)...why does this audio output change the speed that > much? Can it be that ac3 is heavy cpu loading and therefore slower than > mp3 audio movies? And that's why changing the output can increase playback > speed? hmm, I think it's a problem with your audio driver then, for example on my laptop I'll get a slideshow when using mplayers oss out with alsa 0.5 oss emulation, with alsa 0.9 oss emulation it's fine. > Thanks > falk -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Sun Jul 29 21:13:04 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Sun, 29 Jul 2001 21:13:04 +0200 Subject: [Mplayer-users] some problems In-Reply-To: <200107291745.TAA30774@thot.banki.hu> References: <200107291745.TAA30774@thot.banki.hu> Message-ID: <14639131778.20010729211304@gmx.de> Hello Arpi, Sunday, July 29, 2001, 7:45:52 PM, you wrote: > Hi, >> Thank you for defending me. But I've done really some stupid things (BTW: >> you can make a redirct to the real hp - the "backup..."-messages was there >> for some time, so I thought it has sth to with the >> sourceforge-server-problems...). > It is redirected. > just type http://mplayer.sourceforge.net into your browser, and > you will land at http://mplayer.dev.hu > maybe you bookmarked exact url of any html file... >> Now I donwloaded the recent cvs, the libcss and compiled both (but libcss >> first;). But now I get a error: >> >> ich at bretschneidernet:/cdrom$ mplayer -vo xv * >> mplayer: error while loading shared libraries: libcss.so.0: cannot open >> shared object file: No such file or directory > did you run 'ldconfig' ? do you have /usr/local/bin in your /etc/ld.so.conf ? question has been asked several times, can you please generalize it and add it to FAQ, Gabucino? >> > To me it sounds like you're having a bad day Arpi. >> >> Perhaps Arpi has hacked mplayer to much;) > just read too many silly questions on the mailing lists and private... so true =) > we really should set up a helpdesk/support service. > including mail, irc, 24h hotline phone etc... :) > Andr?, don't you want to help us with this? > (so you do something usefull...) Yea and let's buy a big representative bureau somewhere in the pacific ocean or so :) > A'rpi / Astral & ESP-team -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From asalamon at elender.hu Sun Jul 29 21:50:26 2001 From: asalamon at elender.hu (Andras Salamon) Date: Sun, 29 Jul 2001 21:50:26 +0200 (CEST) Subject: [Mplayer-users] mp3lib problem In-Reply-To: <200107291224.OAA46152@thot.banki.hu> Message-ID: On Sun, 29 Jul 2001, Arpi wrote: Hi, > Hi, > > for the YV12-black image problem: > > > System info attached. > > > > Mandrake 7.2 (a few packages from 8.0) > > i think, you have SDL and/or nasm from mandrake 8. Unfortunately no. I have nasm-0.98-5mdk. This is from Mandrake 7.2 (Mandrake 8.0 has 0.98-7mdk. My SDL was builded from source rpm with my gcc 2.95. Anyway, I'll try to upgrade my SDL, and compile nasm from srpm. Maybe it helps. Thx, Sala > nasm in new mandrake is compiled with gcc 2.96, which is > buggy, so the resulting nasm creates buggy code. SDL > compilation requires nasm, and if you compile SDL with > this buggy nasm, it will fail with YV12 and aalib. > It's a very strange and funny bug, discovered by havner, i think. > > you should drop those from 8.0, and compile them from source, > with gcc 2.95.x! > > > A'rpi / Astral & ESP-team > > -- > mailto:arpi at thot.banki.hu > http://esp-team.scene.hu > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From asalamon at elender.hu Sun Jul 29 21:47:15 2001 From: asalamon at elender.hu (Andras Salamon) Date: Sun, 29 Jul 2001 21:47:15 +0200 (CEST) Subject: [Mplayer-users] SDL -noxv problema In-Reply-To: <200107291213.OAA14736@thot.banki.hu> Message-ID: On Sun, 29 Jul 2001, Arpi wrote: Hi, > Hi, > > > On Sun, 29 Jul 2001, Felix Buenemann wrote: > > > > > On Saturday, 28. July 2001 15:55, you wrote: > > > > Hi, > > > > > > > > I tried -vo sdl -noxv with several movies, and it works only for YUY2 > > > > (divx decoded by windows dll), and not for YV12 (mpeg files, divx decoded > > > > by ffdivx). Is it a known bug? I'm using SDL 1.2.0. > > > No, I'll check it, what exact error do you get? > > > > > > > The picture is black. No error messages. > > > I think it's the gcc 2.96 problem then... > (see DOCS/BUGS, black image with mpeg) > I've read DOCS/BUGS. But I have gcc 2.95.3. Sala > > A'rpi / Astral & ESP-team > > -- > mailto:arpi at thot.banki.hu > http://esp-team.scene.hu > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From asalamon at elender.hu Sun Jul 29 21:46:56 2001 From: asalamon at elender.hu (Andras Salamon) Date: Sun, 29 Jul 2001 21:46:56 +0200 (CEST) Subject: [Mplayer-users] mp3lib problem In-Reply-To: <034702549.20010729195914@gmx.de> Message-ID: On Sun, 29 Jul 2001, Felix Buenemann wrote: Hello Felix, > Hello Andras, > > >> > mp3lib: Processor ID: 686 > >> > mp3lib: Using SSE! optimized decore. > >> > Illegal instruction (core dumped) > >> > > >> > If I use ./configure --disable-sse, everything works fine. But it worked > >> > fine with SSE before. > >> > > >> > >> please send a complete bugreport as written in DOCS/BUGREPORTS. > >> Otherwise I can't debug it. > >> > > > System info attached. > yea, but you missed the GDB debugging session (do stuff written in > DOCS/BUGREPORTS with gdb) > Right. Sorry. I've created this sysinfo file a weak ago, when I posted a question (no answer), which has no crashes. But you were able to answer me without gdb in your next mail. Thx. Sala _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From adek at one.pl.eu.org Sun Jul 29 21:49:09 2001 From: adek at one.pl.eu.org (Adrian Zurek) Date: Sun, 29 Jul 2001 21:49:09 +0200 Subject: [Mplayer-users] some problems In-Reply-To: <200107291745.TAA30774@thot.banki.hu> References: <200107291745.TAA30774@thot.banki.hu> Message-ID: <20010729214904.A7595@guru.one.pl.eu.org> On Sun, Jul 29, 2001 at 07:45:52PM +0200, Arpi wrote: > > ich at bretschneidernet:/cdrom$ mplayer -vo xv * > > mplayer: error while loading shared libraries: libcss.so.0: cannot open > > shared object file: No such file or directory > > did you run 'ldconfig' ? do you have /usr/local/bin in your /etc/ld.so.conf ? Uhmmm... maybe it's stupid (I haven't used libcss) but maybe /usr/local/lib ? And do ldconfig -p|grep libcss It should be found there... -- _________ ___. ____ adrian zurek ____\ \ _______-- !_/ / adek at one.pl.eu.org / \ \ \\ _____/ /-------------------------------------------. \ -- \ \ / ___)____ < 21:47:08 up 1 day, 22:33, 1 user | \____/\\_____/_______ / \\ load average: 0.04, 0.03, 0.00 | `--------\/--- at guru----\/__/\____\------------------------------------------' _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre.dahlqvist at telia.com Mon Jul 30 01:16:37 2001 From: andre.dahlqvist at telia.com (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Mon, 30 Jul 2001 01:16:37 +0200 Subject: [Mplayer-users] some problems In-Reply-To: <20010729204306.179511a3.martin@bretschneidernet.de> References: <20010729193226.0253b106.martin@bretschneidernet.de> <200107291745.TAA30774@thot.banki.hu> <20010729204306.179511a3.martin@bretschneidernet.de> Message-ID: <20010730011637.A17028@telia.com> Martin Bretschneider wrote: > > did you run 'ldconfig' ? do you have /usr/local/bin in your > /etc/ld.so.conf ? > > No, but it doesn't changes anything... May I write a bugreport? That should have been /usr/local/lib. Try adding that to your /etc/ld.so.conf file and run ldconfig as root. -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lanzz at lanzz.org Mon Jul 30 07:58:42 2001 From: lanzz at lanzz.org (lanzz at lanzz.org) Date: Mon, 30 Jul 2001 08:58:42 +0300 (EEST) Subject: [Mplayer-users] Mailing list suggestions In-Reply-To: <200107291251.f6TCp5h01416@alison.hemmet.chalmers.se> Message-ID: On Sun, 29 Jul 2001, Christoph H. Lampert wrote: > Yes, but after a while somebody might notice that it's offtopic and take the > five seconds to change that line. After that it's moved to the other list and > everybody can reply again... nope. there will be TWO discussions then, one in each list. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Mon Jul 30 12:18:28 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Mon, 30 Jul 2001 10:18:28 +0000 (:) Subject: [Mplayer-users] Re: ATI Radeon VE Message-ID: Hi, Arpi! On 2001-07-28 15:26:11 you wrote: >Hi, > >> (probably sharpness or something likewise). Maybe it's postprocessing >> (or not well enough or unnecessary) for libmpeg2, Arpi? >try to play with -pp option >-pp 0 - no postp >-pp 63 - all postp filters > Yes, -pp 0 is better but not perfect. With -pp 63 I got some strange rectangles (squares) on screen when story is changed. >i think that no postp needed for DVD, it's high bitrate enough. >postproc is recommended for low bitrate mpeg1 files. > >> And last: I don't know - is it effect of 3D's performance but -vo gl >> produces only 5-10 frames per second on this chip. >do you have DRI set up corectly? I don't use dri. Finely dri module is loaded but Section "DRI" is commented out. >how many fps do you get from 'gears' ? I don't know how extract such information from 'gears' but 'glxgears' shows me 170FPS in standard window and 16-20FPS in window which have size of full screen (1024x768x24). > >A'rpi / Astral & ESP-team > Best regards! Nick (2001-07-30 10:13:18) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jfontain at winealley.com Mon Jul 30 09:37:22 2001 From: jfontain at winealley.com (Jean-Luc Fontaine) Date: Mon, 30 Jul 2001 09:37:22 +0200 Subject: [Mplayer-users] difference between divxc32.dll and divxc32f.dll? Message-ID: <3B650EB2.2020601@winealley.com> I understand one is "fast-motion". What does it mean exactly? As far as quality goes, which one do you recommend for encoding movies? Many thanks in advance. -- Jean-Luc Fontaine _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From riffraff at columbia.ton.tut.fi Mon Jul 30 10:07:36 2001 From: riffraff at columbia.ton.tut.fi (Juha Kuikka) Date: Mon, 30 Jul 2001 11:07:36 +0300 (EEST) Subject: [Mplayer-users] Maintaining movie acpect ratio in windowed mode, possible? In-Reply-To: <3B63E5C0.1090306@nerd.dk> Message-ID: > >>I was trying to find a feature that forces windows acpect ratio to remain > >>the same as the films when resizing window. Is there such a feature in > A feature like -zoom would be nice, but it would be better if you could > resize while watching the movie like Windows media player (If you don't > know what WMP does: If you resize the window then WMP keeps the movie > aspect ratio inside the border). A feature where you could zoom in-movie > would be as good. I agree. Something like that would be very usable. Sadly I lack the skill needed to implement it. :( - Juha Kuikka _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jfontain at winealley.com Mon Jul 30 10:27:35 2001 From: jfontain at winealley.com (Jean-Luc Fontaine) Date: Mon, 30 Jul 2001 10:27:35 +0200 Subject: [Mplayer-users] Maintaining movie acpect ratio in windowed mode, possible? References: Message-ID: <3B651A77.9090102@winealley.com> Juha Kuikka wrote: >>>>I was trying to find a feature that forces windows acpect ratio to remain >>>>the same as the films when resizing window. Is there such a feature in >>>> > >>A feature like -zoom would be nice, but it would be better if you could >>resize while watching the movie like Windows media player (If you don't >>know what WMP does: If you resize the window then WMP keeps the movie >>aspect ratio inside the border). A feature where you could zoom in-movie >>would be as good. >> > > I agree. Something like that would be very usable. Sadly I lack the skill > needed to implement it. :( There is a way to tell the window manager to maintain the aspect ratio while resizing. I am sorry that I do not have the time to dig any deeper right now but "man wm" from Tcl/Tk gives: wm aspect window ?minNumer minDenom maxNumer maxDenom? If minNumer, minDenom, maxNumer, and maxDenom are all specified, then they will be passed to the win? dow manager and the window manager should use them to enforce a range of acceptable aspect ratios for window. The aspect ratio of window (width/length) will be constrained to lie between minNumer/minDe? nom and maxNumer/maxDenom. If minNumer etc... It should be easy to find the corresponding C code from the Tcl/Tk source (at activestate.com). > > - Juha Kuikka > > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > > -- Jean-Luc Fontaine _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 30 10:53:29 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 30 Jul 2001 10:53:29 +0200 (CEST) Subject: [Mplayer-users] Re: ATI Radeon VE In-Reply-To: Message-ID: <200107300853.KAA50474@thot.banki.hu> Hi, > >> (probably sharpness or something likewise). Maybe it's postprocessing > >> (or not well enough or unnecessary) for libmpeg2, Arpi? > >try to play with -pp option > >-pp 0 - no postp > >-pp 63 - all postp filters > > > Yes, -pp 0 is better but not perfect. > With -pp 63 I got some strange rectangles (squares) on screen > when story is changed. What about immediate values? 7, 15 etc ? > >i think that no postp needed for DVD, it's high bitrate enough. > >postproc is recommended for low bitrate mpeg1 files. > > > >> And last: I don't know - is it effect of 3D's performance but -vo gl > >> produces only 5-10 frames per second on this chip. > >do you have DRI set up corectly? > I don't use dri. Finely dri module is loaded but Section "DRI" is commented out. > >how many fps do you get from 'gears' ? > I don't know how extract such information from 'gears' > but 'glxgears' shows me 170FPS in standard window and 16-20FPS in window > which have size of full screen (1024x768x24). it's software render then. even an old ati rage pro gives 600fps in window... my g400 gives 1200 fps. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From kinali at gmx.net Mon Jul 30 10:52:45 2001 From: kinali at gmx.net (Attila Kinali) Date: Mon, 30 Jul 2001 10:52:45 +0200 Subject: [Mplayer-users] some problems In-Reply-To: <20010729204306.179511a3.martin@bretschneidernet.de> References: <20010729193226.0253b106.martin@bretschneidernet.de> <200107291745.TAA30774@thot.banki.hu> <20010729204306.179511a3.martin@bretschneidernet.de> Message-ID: On Sun, 29 Jul 2001 20:43:06 +0200 Martin Bretschneider wrote: > > did you run 'ldconfig' ? do you have /usr/local/bin in your > /etc/ld.so.conf ? > > No, but it doesn't changes anything... May I write a bugreport? Check wether /usr/local/lib is in /etc/ld.so.config, not all distros add it per default. and then try ldconfig -v |grep css, if you see libcss you did it right. Attila Kinali -- Man who sink into womans arms soon have arms in womans sink. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Mon Jul 30 15:18:34 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Mon, 30 Jul 2001 13:18:34 +0000 (:) Subject: [Mplayer-users] new ffmpeg stuff In-Reply-To: Message-ID: Hello! I've synced ffmpeg libavcodec with mplayer's. Now there are all features which were in mplayer except fastmemcpy :( (only if Gerard will not unroll them back ;) Now mplayer's libavcodec stuff is out-of-date against ffmpeg. If you want to get newest stuff - you should sync with ffmpeg-CVS and simply copy ffmpeg libavcodec subfolder to mplayer. (It would be better to delete mplayer's libavcodec stuff before ;) Best regards! Nick _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nickols_k at mail.ru Mon Jul 30 15:38:39 2001 From: nickols_k at mail.ru (Nick Kurshev) Date: Mon, 30 Jul 2001 13:38:39 +0000 (:) Subject: [Mplayer-users] Re: ATI Radeon VE In-Reply-To: <200107300853.KAA50474@thot.banki.hu> Message-ID: Hi, Arpi! On 2001-07-30 10:53:29 you wrote: >Hi, > >> >> (probably sharpness or something likewise). Maybe it's postprocessing >> >> (or not well enough or unnecessary) for libmpeg2, Arpi? >> >try to play with -pp option >> >-pp 0 - no postp >> >-pp 63 - all postp filters >> > >> Yes, -pp 0 is better but not perfect. >> With -pp 63 I got some strange rectangles (squares) on screen >> when story is changed. >What about immediate values? 7, 15 etc ? I still have not configured MTRR and -dga doesn't work for me. in this connexion -pp 15 already perform not real-time decoding but I've not found any visible difference in picture quality, althrough something is changed, undoubtedly. Thus -pp 0 is better key for me. ;) But problem with sharpness looks like image is scaled without antialiasing (mean boundaries of diagonalled object is not smooth and have little steps, althrough under windows - all fine). Maybe win driver uses hardware scaling or something other tricks? > >> >i think that no postp needed for DVD, it's high bitrate enough. >> >postproc is recommended for low bitrate mpeg1 files. >> > >> >> And last: I don't know - is it effect of 3D's performance but -vo gl >> >> produces only 5-10 frames per second on this chip. >> >do you have DRI set up corectly? >> I don't use dri. Finely dri module is loaded but Section "DRI" is commented out. >> >how many fps do you get from 'gears' ? >> I don't know how extract such information from 'gears' >> but 'glxgears' shows me 170FPS in standard window and 16-20FPS in window >> which have size of full screen (1024x768x24). >it's software render then. >even an old ati rage pro gives 600fps in window... >my g400 gives 1200 fps. > 3D performance is on main goal for me ;) But in the future I'll tuneup and this feature. Best regards! Nick (2001-07-30 13:31:39) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From flohr at itp.uni-hannover.de Mon Jul 30 12:01:53 2001 From: flohr at itp.uni-hannover.de (Michael Flohr) Date: Mon, 30 Jul 2001 12:01:53 +0200 Subject: [Mplayer-users] Very low audio volume References: <3B5C09B5.F8120653@itp.uni-hannover.de> Message-ID: <3B653091.B1C49EE9@itp.uni-hannover.de> Hi Attila, > On Mon, 23 Jul 2001 13:25:41 +0200 Michael Flohr wrote: > > > just compiled MPlayer 0.18pre. It works great. > > However, I noticed one very strange thing I can't explain. > > When playing AVI files, the sound volume is EXTREMELY low. > > Pushing master and pcm to max makes sound barely audible. > > Try 0.18pre5 (or is it pre6 ?) or get it from cvs. > Things changed a lot since 0.18pre It is 0.18pre5 according to what is says upon startup. > > Did anyone notice something similar? > > By the way: I run alsa0.5.10, but I use "-ao oss" for sound output > > since "-ao alsa5" disables sound with an error roughly like > > "alsa-init: ... invalid parameters ..." > > Alsa 0.5.x is broken. I never got -ao alsa to work. If you > have time, try 0.9beta6 and tell us whether it works. > (sorry, no time to do it myself). I'll try and let you know, but it may take some time. Michael _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Mon Jul 30 12:08:08 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Mon, 30 Jul 2001 12:08:08 +0200 Subject: [Mplayer-users] new ffmpeg stuff In-Reply-To: References: Message-ID: <20010730120808.A95830@hoth.amu.edu.pl> On Mon, Jul 30, 2001 at 01:18:34PM +0000, Nick Kurshev wrote: > Hello! > > I've synced ffmpeg libavcodec with mplayer's. > Now there are all features which were in mplayer except fastmemcpy :( > (only if Gerard will not unroll them back ;) > Now mplayer's libavcodec stuff is out-of-date against ffmpeg. But it is MUCH faster than cvs.ffmpeg :) > If you want to get newest stuff - you should sync with ffmpeg-CVS > and simply copy ffmpeg libavcodec subfolder to mplayer. > (It would be better to delete mplayer's libavcodec stuff before ;) results: FreeBSD 4.3 AMD K6-2 333MHz + C&T CT65554 + Xv gcc version 2.95.3 [FreeBSD] 20010315 (release) XFree86 Version 4.1.0 / X Window System (800x600x24bpp) MMX + 3DNow -nosound -benchmark -osdlevel 2 [-vc divx|divxds|ffdivx] ffdivx history: 2001-07-21: mplayer ffdivx 2001-07-24: first cvs.ffmpeg 2001-07-25: cvs.ffmpeg 2001-07-30: cvs.ffmpeg Best Results: Space Cowboys trailer (145s): [DIV3] 480x200 24bpp 24.00 fps 154.3 kbps divx---010723: V: 26.601s VO: 8.711s A: 0.000s Sys: 17.093s = 52.406s divxds-010720: V: 27.631s VO: 10.465s A: 0.000s Sys: 20.189s = 58.285s divx4--010723: NA ffdivx-010721: V: 27.304s VO: 9.011s A: 0.000s Sys: 17.221s = 53.536s ffdivx-010724: V: 28.377s VO: 8.893s A: 0.000s Sys: 17.343s = 54.613s ffdivx-010725: V: 40.395s VO: 9.040s A: 0.000s Sys: 17.438s = 66.873s ffdivx-010730: V: 41.135s VO: 9.200s A: 0.000s Sys: 20.081s = 70.416s MI2 trailer (121s): [DIV3] 480x204 24bpp 24.00 fps 700.6 kbps divx---010720: V: 42.600s VO: 9.061s A: 0.000s Sys: 17.498s = 69.159s divxds-010720: V: 43.662s VO: 9.126s A: 0.000s Sys: 17.804s = 70.592s divx4--010723: NA ffdivx-010721: V: 43.284s VO: 9.157s A: 0.000s Sys: 18.205s = 70.646s ffdivx-010724: V: 43.953s VO: 9.141s A: 0.000s Sys: 18.283s = 71.377s ffdivx-010725: V: 58.287s VO: 9.099s A: 0.000s Sys: 18.323s = 85.709s ffdivx-010730: V: 57.622s VO: 9.293s A: 0.000s Sys: 20.565s = 87.480s Tomb Raider trailer (136s): [DIV3] 480x260 24bpp 24.00 fps 761.0 kbps divx---010720: V: 52.189s VO: 11.377s A: 0.000s Sys: 21.377s = 84.943s divxds-010720: V: 53.754s VO: 11.364s A: 0.000s Sys: 21.381s = 86.499s divx4--010723: NA ffdivx-010721: V: 50.546s VO: 11.740s A: 0.000s Sys: 21.793s = 84.079s ffdivx-010724: V: 51.398s VO: 11.529s A: 0.000s Sys: 21.886s = 84.814s ffdivx-010725: V: 67.532s VO: 11.633s A: 0.000s Sys: 22.002s = 101.167s ffdivx-010730: V: 69.512s VO: 11.682s A: 0.000s Sys: 24.250s = 105.444s Wing Commander trailer (68s): [DIV3] 640x360 24bpp 24.00 fps 846.9 kbps divx---010720: V: 43.329s VO: 10.451s A: 0.000s Sys: 19.470s = 73.250s divxds-010720: V: 44.259s VO: 10.484s A: 0.000s Sys: 19.487s = 74.229s divx4--010723: NA ffdivx-010721: V: 40.928s VO: 8.217s A: 0.000s Sys: 19.745s = 68.889s ffdivx-010724: V: 41.755s VO: 8.130s A: 0.000s Sys: 19.653s = 69.538s ffdivx-010725: V: 58.956s VO: 8.082s A: 0.000s Sys: 19.766s = 86.805s ffdivx-010730: V: 58.987s VO: 8.136s A: 0.000s Sys: 21.056s = 88.179s Dune trailer (60s): [DIV3] 624x356 24bpp 24.00 fps 1154.6 kbps divx---010720: V: 38.014s VO: 10.254s A: 0.000s Sys: 18.678s = 66.946s divxds-010720: V: 38.915s VO: 10.140s A: 0.000s Sys: 18.924s = 67.978s divx4--010723: NA ffdivx-010721: V: 42.094s VO: 10.597s A: 0.000s Sys: 19.207s = 71.899s ffdivx-010724: V: 43.293s VO: 10.688s A: 0.000s Sys: 19.224s = 73.205s ffdivx-010725: V: 54.922s VO: 10.651s A: 0.000s Sys: 19.291s = 84.864s ffdivx-010730: V: 53.635s VO: 10.716s A: 0.000s Sys: 20.563s = 84.914s Gladiator trailer (85s): [DIV3] 480x272 24bpp 24.00 fps 986.1 kbps divx---010720: V: 38.197s VO: 9.118s A: 0.000s Sys: 16.341s = 63.656s divxds-010720: V: 39.719s VO: 9.148s A: 0.000s Sys: 16.095s = 64.961s divx4--010723: NA ffdivx-010721: V: 38.917s VO: 8.772s A: 0.000s Sys: 16.688s = 64.376s ffdivx-010724: V: 40.310s VO: 8.840s A: 0.000s Sys: 16.463s = 65.614s ffdivx-010725: V: 50.564s VO: 8.738s A: 0.000s Sys: 16.648s = 75.950s ffdivx-010730: V: 52.934s VO: 8.888s A: 0.000s Sys: 18.516s = 80.338s Ronin trailer (122s): [DIV3] 640x304 24bpp 25.00 fps 820.6 kbps divx---010720: V: 76.437s VO: 19.920s A: 0.000s Sys: 35.158s = 131.515s divxds-010720: V: 75.681s VO: 20.058s A: 0.000s Sys: 35.098s = 130.836s divx4--010723: NA ffdivx-010721: V: 77.311s VO: 14.713s A: 0.000s Sys: 35.946s = 127.971s ffdivx-010724: V: 79.369s VO: 14.606s A: 0.000s Sys: 35.541s = 129.516s ffdivx-010725: V: 107.839s VO: 14.650s A: 0.000s Sys: 35.901s = 158.390s ffdivx-010730: V: 106.774s VO: 14.811s A: 0.000s Sys: 38.541s = 160.127s Hannibal trailer (139s): [DIV3] 480x260 24bpp 24.00 fps 185.7 kbps divx---010720: V: 34.902s VO: 13.047s A: 0.000s Sys: 23.557s = 71.506s divxds-010720: V: 35.669s VO: 13.451s A: 0.000s Sys: 24.632s = 73.752s divx4--010723: NA ffdivx-010721: V: 38.055s VO: 13.345s A: 0.000s Sys: 23.882s = 75.283s ffdivx-010724: V: 39.615s VO: 13.283s A: 0.000s Sys: 23.924s = 76.821s ffdivx-010725: V: 52.868s VO: 13.440s A: 0.000s Sys: 23.640s = 89.948s ffdivx-010730: V: 53.945s VO: 13.306s A: 0.000s Sys: 26.895s = 94.145s Star Wars 1 trailer (147s): [DIV3] 640x288 24bpp 24.00 fps 995.3 kbps divx---010720: V: 82.784s VO: 21.985s A: 0.000s Sys: 38.765s = 143.534s divxds-010720: V: 82.977s VO: 22.021s A: 0.000s Sys: 38.686s = 143.684s divx4--010723: NA ffdivx-010721: V: 85.891s VO: 16.024s A: 0.000s Sys: 39.751s = 141.665s ffdivx-010724: V: 88.884s VO: 15.941s A: 0.000s Sys: 42.479s = 147.304s ffdivx-010725: V: 115.336s VO: 16.007s A: 0.000s Sys: 40.087s = 171.430s ffdivx-010730: V: 115.026s VO: 16.174s A: 0.000s Sys: 42.770s = 173.970s Highlander 4 trailer (97s): [DIV3] 520x310 24bpp 24.00 fps 892.7 kbps divx---010720: V: 54.347s VO: 11.776s A: 0.000s Sys: 21.669s = 87.792s divxds-010720: V: 54.506s VO: 12.052s A: 0.000s Sys: 21.917s = 88.474s divx4--010723: NA ffdivx-010721: V: 54.293s VO: 9.478s A: 0.000s Sys: 22.019s = 85.790s ffdivx-010724: V: 55.379s VO: 9.302s A: 0.000s Sys: 21.862s = 86.542s ffdivx-010725: V: 72.137s VO: 9.391s A: 0.000s Sys: 21.845s = 103.373s ffdivx-010730: V: 72.265s VO: 9.389s A: 0.000s Sys: 23.685s = 105.339s Best regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 30 12:03:58 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 30 Jul 2001 12:03:58 +0200 (CEST) Subject: [Mplayer-users] new ffmpeg stuff In-Reply-To: Message-ID: <200107301003.MAA53576@thot.banki.hu> Hi, > I've synced ffmpeg libavcodec with mplayer's. Thanks. > Now there are all features which were in mplayer except fastmemcpy :( cpuid stuff should be fixed in ffmpeg cvs, it's brokwn now. VIDEO: [DIV3] 640x352 24bpp 23.98 fps 951.2 kbps (116.1 kbyte/s) libavcodec from mplayer cvs: BENCHMARKs: V: 12.822s VO: 0.007s A: 0.000s Sys: 0.502s = 13.332s libavcodec from ffmpeg cvs, using old (working) cputest.c: BENCHMARKs: V: 13.036s VO: 0.008s A: 0.000s Sys: 0.525s = 13.569s maybe fastmemcpy could help here. > (only if Gerard will not unroll them back ;) i hope he won't. > Now mplayer's libavcodec stuff is out-of-date against ffmpeg. > If you want to get newest stuff - you should sync with ffmpeg-CVS > and simply copy ffmpeg libavcodec subfolder to mplayer. > (It would be better to delete mplayer's libavcodec stuff before ;) as soon ffmpeg's version reaches mplayer's speed, i'll remove and place a README there. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 30 12:12:51 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 30 Jul 2001 12:12:51 +0200 (CEST) Subject: [Mplayer-users] new ffmpeg stuff In-Reply-To: <20010730120808.A95830@hoth.amu.edu.pl> Message-ID: <200107301012.MAA15664@thot.banki.hu> Hi, > > I've synced ffmpeg libavcodec with mplayer's. > > Now there are all features which were in mplayer except fastmemcpy :( > > (only if Gerard will not unroll them back ;) > > Now mplayer's libavcodec stuff is out-of-date against ffmpeg. > > But it is MUCH faster than cvs.ffmpeg :) please replace ffmpeg's i386/cputest.c with the file from 2001-07-24 version, and try again. cputest.c in current ffmpeg cvs is broken :( (it reports no mmx,sse etc -> so plain C code is running -> slow) btw i still can't get the same (or better) speed as mplayer cvs :( A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre at debian.org Mon Jul 30 12:30:05 2001 From: andre at debian.org (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Mon, 30 Jul 2001 12:30:05 +0200 Subject: [Mplayer-users] ESP page points to old website Message-ID: <20010730123005.A1735@telia.com> Just something I noticed: When clicking on MPlayer on the ESP homepage you are taken to the old mplayer page. -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Mon Jul 30 12:49:14 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Mon, 30 Jul 2001 12:49:14 +0200 Subject: [Mplayer-users] new ffmpeg stuff In-Reply-To: <200107301012.MAA15664@thot.banki.hu> References: <20010730120808.A95830@hoth.amu.edu.pl> <200107301012.MAA15664@thot.banki.hu> Message-ID: <20010730124914.A98224@hoth.amu.edu.pl> On Mon, Jul 30, 2001 at 12:12:51PM +0200, Arpi wrote: > Hi, > > > > I've synced ffmpeg libavcodec with mplayer's. > > > Now there are all features which were in mplayer except fastmemcpy :( > > > (only if Gerard will not unroll them back ;) > > > Now mplayer's libavcodec stuff is out-of-date against ffmpeg. > > > > But it is MUCH faster than cvs.ffmpeg :) > > please replace ffmpeg's i386/cputest.c with the file from 2001-07-24 > version, and try again. cputest.c in current ffmpeg cvs is broken :( > (it reports no mmx,sse etc -> so plain C code is running -> slow) I don't have 2001-07-24 i386/cputest.c :( /cputest.c/1.1.1.1/Sun Jul 22 14:21:52 2001// won't help and new code are still MUCH slower than mplayer ffmpeg :( best regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 30 12:52:03 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 30 Jul 2001 12:52:03 +0200 (CEST) Subject: [Mplayer-users] new ffmpeg stuff In-Reply-To: <20010730124914.A98224@hoth.amu.edu.pl> Message-ID: <200107301052.MAA10950@thot.banki.hu> Hi, > > > > I've synced ffmpeg libavcodec with mplayer's. > > > > Now there are all features which were in mplayer except fastmemcpy :( > > > > (only if Gerard will not unroll them back ;) > > > > Now mplayer's libavcodec stuff is out-of-date against ffmpeg. > > > > > > But it is MUCH faster than cvs.ffmpeg :) > > > > please replace ffmpeg's i386/cputest.c with the file from 2001-07-24 > > version, and try again. cputest.c in current ffmpeg cvs is broken :( > > (it reports no mmx,sse etc -> so plain C code is running -> slow) > > I don't have 2001-07-24 i386/cputest.c :( > > /cputest.c/1.1.1.1/Sun Jul 22 14:21:52 2001// it's ok. (3343 bytes long) > won't help and new code are still MUCH slower than mplayer ffmpeg :( did you recompile everything? i got near as fast as mpeg cvs. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Mon Jul 30 13:03:54 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Mon, 30 Jul 2001 13:03:54 +0200 Subject: [Mplayer-users] new ffmpeg stuff In-Reply-To: <20010730124914.A98224@hoth.amu.edu.pl> References: <20010730120808.A95830@hoth.amu.edu.pl> <200107301012.MAA15664@thot.banki.hu> <20010730124914.A98224@hoth.amu.edu.pl> Message-ID: <20010730130354.B98224@hoth.amu.edu.pl> On Mon, Jul 30, 2001 at 12:49:14PM +0200, Bohdan Horst wrote: > On Mon, Jul 30, 2001 at 12:12:51PM +0200, Arpi wrote: > > > Hi, > > > > > > I've synced ffmpeg libavcodec with mplayer's. > > > > Now there are all features which were in mplayer except fastmemcpy :( > > > > (only if Gerard will not unroll them back ;) > > > > Now mplayer's libavcodec stuff is out-of-date against ffmpeg. > > > > > > But it is MUCH faster than cvs.ffmpeg :) > > > > please replace ffmpeg's i386/cputest.c with the file from 2001-07-24 > > version, and try again. cputest.c in current ffmpeg cvs is broken :( > > (it reports no mmx,sse etc -> so plain C code is running -> slow) > > I don't have 2001-07-24 i386/cputest.c :( > > /cputest.c/1.1.1.1/Sun Jul 22 14:21:52 2001// > won't help and new code are still MUCH slower than mplayer ffmpeg :( sorry - smth wrong with my first tests .. :(( cputest.c/1.1.1.1 and new Code are faster than cvs.ffmpeg and comparable than mplayer.ffmpeg -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From creppy at freemail.hu Mon Jul 30 13:11:54 2001 From: creppy at freemail.hu (Creepy) Date: Mon, 30 Jul 2001 13:11:54 +0200 Subject: [Mplayer-users] debian xv fault References: Message-ID: <008501c118e8$70ae1260$27d03c86@informatik.uniulm.de> I already got mplayer work this way, but for about 4-5 days, mplayer won't run with -vo xv if I am a user, if I am root (su), it does the thing! I don't know if I changed anything (something for sure, 'coz it's no win, so that it goes wrong from itself). Finds audio, video streams, codec, writes XV is from X.Y., but then something with "unable to Xcreatewindow, or something like that (sorry the complete error home, can't paste it right now, maybe later if nobody knows what it is...). Tried to reinstall NVdriver, no effect. Any idea? thanks Creepy _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From erik.almqvist at home.se Mon Jul 30 13:15:34 2001 From: erik.almqvist at home.se (Erik Almqvist) Date: Mon, 30 Jul 2001 13:15:34 +0200 Subject: [Mplayer-users] divx brightness In-Reply-To: <17334413163.20010729195425@gmx.de> References: <20010729094404.20f53f49.erik.almqvist@home.se> <17334413163.20010729195425@gmx.de> Message-ID: <20010730131534.03e9df06.erik.almqvist@home.se> On Sun, 29 Jul 2001 19:54:25 +0200 Felix Buenemann wrote: > Hello Erik, > > Sunday, July 29, 2001, 9:44:04 AM, you wrote: > > > My divx playback is very dark. > > How do I set brightness? > > Are there settings for contrasts etc as well? > there are, potentionally, but code was never used in mplayer. Look at > the commented out code in older mplayer.c (moved to dec_video.c and > removed unused stuff nowadays.) Does this mean there will be such a feature implemented soon? /erik > > -- > Best regards, > Felix mailto:atmosfear at users.sourceforge.net > > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > __________________________ Erik Almqist erik.almqvist at home.se http://ealm.dyndns.org:180 _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Mon Jul 30 13:53:47 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Mon, 30 Jul 2001 13:53:47 +0200 Subject: [Mplayer-users] new ffmpeg stuff In-Reply-To: <200107301052.MAA10950@thot.banki.hu> References: <20010730124914.A98224@hoth.amu.edu.pl> <200107301052.MAA10950@thot.banki.hu> Message-ID: <20010730135346.A99266@hoth.amu.edu.pl> On Mon, Jul 30, 2001 at 12:52:03PM +0200, Arpi wrote: > did you recompile everything? i got near as fast as mpeg cvs. results: FreeBSD 4.3 AMD K6-2 333MHz + C&T CT65554 + Xv gcc version 2.95.3 [FreeBSD] 20010315 (release) XFree86 Version 4.1.0 / X Window System (800x600x24bpp) MMX + 3DNow -nosound -benchmark -osdlevel 2 [-vc divx|divxds|ffdivx] ffdivx history: 2001-07-21: mplayer ffdivx 2001-07-24: first cvs.ffmpeg 2001-07-30: cvs.ffmpeg+cputest.c Best Results: Space Cowboys trailer (145s): [DIV3] 480x200 24bpp 24.00 fps 154.3 kbps divx---010723: V: 26.601s VO: 8.711s A: 0.000s Sys: 17.093s = 52.406s divxds-010720: V: 27.631s VO: 10.465s A: 0.000s Sys: 20.189s = 58.285s divx4--010723: NA ffdivx-010721: V: 27.304s VO: 9.011s A: 0.000s Sys: 17.221s = 53.536s ffdivx-010724: V: 28.377s VO: 8.893s A: 0.000s Sys: 17.343s = 54.613s ffdivx-010730: V: 26.073s VO: 9.124s A: 0.000s Sys: 19.991s = 55.187s MI2 trailer (121s): [DIV3] 480x204 24bpp 24.00 fps 700.6 kbps divx---010720: V: 42.600s VO: 9.061s A: 0.000s Sys: 17.498s = 69.159s divxds-010720: V: 43.662s VO: 9.126s A: 0.000s Sys: 17.804s = 70.592s divx4--010723: NA ffdivx-010721: V: 43.284s VO: 9.157s A: 0.000s Sys: 18.205s = 70.646s ffdivx-010724: V: 43.953s VO: 9.141s A: 0.000s Sys: 18.283s = 71.377s ffdivx-010730: V: 41.608s VO: 9.282s A: 0.000s Sys: 20.417s = 71.307s Tomb Raider trailer (136s): [DIV3] 480x260 24bpp 24.00 fps 761.0 kbps divx---010720: V: 52.189s VO: 11.377s A: 0.000s Sys: 21.377s = 84.943s divxds-010720: V: 53.754s VO: 11.364s A: 0.000s Sys: 21.381s = 86.499s divx4--010723: NA ffdivx-010721: V: 50.546s VO: 11.740s A: 0.000s Sys: 21.793s = 84.079s ffdivx-010724: V: 51.398s VO: 11.529s A: 0.000s Sys: 21.886s = 84.814s ffdivx-010730: V: 50.460s VO: 11.650s A: 0.000s Sys: 24.153s = 86.262s Wing Commander trailer (68s): [DIV3] 640x360 24bpp 24.00 fps 846.9 kbps divx---010720: V: 43.329s VO: 10.451s A: 0.000s Sys: 19.470s = 73.250s divxds-010720: V: 44.259s VO: 10.484s A: 0.000s Sys: 19.487s = 74.229s divx4--010723: NA ffdivx-010721: V: 40.928s VO: 8.217s A: 0.000s Sys: 19.745s = 68.889s ffdivx-010724: V: 41.755s VO: 8.130s A: 0.000s Sys: 19.653s = 69.538s ffdivx-010730: V: 40.385s VO: 8.141s A: 0.000s Sys: 20.949s = 69.475s Dune trailer (60s): [DIV3] 624x356 24bpp 24.00 fps 1154.6 kbps divx---010720: V: 38.014s VO: 10.254s A: 0.000s Sys: 18.678s = 66.946s divxds-010720: V: 38.915s VO: 10.140s A: 0.000s Sys: 18.924s = 67.978s divx4--010723: NA ffdivx-010721: V: 42.094s VO: 10.597s A: 0.000s Sys: 19.207s = 71.899s ffdivx-010724: V: 43.293s VO: 10.688s A: 0.000s Sys: 19.224s = 73.205s ffdivx-010730: V: 38.931s VO: 10.758s A: 0.000s Sys: 20.505s = 70.194s Gladiator trailer (85s): [DIV3] 480x272 24bpp 24.00 fps 986.1 kbps divx---010720: V: 38.197s VO: 9.118s A: 0.000s Sys: 16.341s = 63.656s divxds-010720: V: 39.719s VO: 9.148s A: 0.000s Sys: 16.095s = 64.961s divx4--010723: NA ffdivx-010721: V: 38.917s VO: 8.772s A: 0.000s Sys: 16.688s = 64.376s ffdivx-010724: V: 40.310s VO: 8.840s A: 0.000s Sys: 16.463s = 65.614s ffdivx-010730: V: 39.829s VO: 8.879s A: 0.000s Sys: 18.268s = 66.975s Hannibal trailer (139s): [DIV3] 480x260 24bpp 24.00 fps 185.7 kbps divx---010720: V: 34.902s VO: 13.047s A: 0.000s Sys: 23.557s = 71.506s divxds-010720: V: 35.669s VO: 13.451s A: 0.000s Sys: 24.632s = 73.752s divx4--010723: NA ffdivx-010721: V: 38.055s VO: 13.345s A: 0.000s Sys: 23.882s = 75.283s ffdivx-010724: V: 39.615s VO: 13.283s A: 0.000s Sys: 23.924s = 76.821s ffdivx-010730: V: 34.850s VO: 13.171s A: 0.000s Sys: 26.716s = 74.737s Highlander 4 trailer (97s): [DIV3] 520x310 24bpp 24.00 fps 892.7 kbps divx---010720: V: 54.347s VO: 11.776s A: 0.000s Sys: 21.669s = 87.792s divxds-010720: V: 54.506s VO: 12.052s A: 0.000s Sys: 21.917s = 88.474s divx4--010723: NA ffdivx-010721: V: 54.293s VO: 9.478s A: 0.000s Sys: 22.019s = 85.790s ffdivx-010724: V: 55.379s VO: 9.302s A: 0.000s Sys: 21.862s = 86.542s ffdivx-010730: V: 52.706s VO: 9.481s A: 0.000s Sys: 23.740s = 85.928s -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 30 15:16:38 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 30 Jul 2001 15:16:38 +0200 (CEST) Subject: [Mplayer-users] new ffmpeg stuff In-Reply-To: <20010730135346.A99266@hoth.amu.edu.pl> Message-ID: <200107301316.PAA58738@thot.banki.hu> Hi, My results: File: /3d/divx/405divx_sm_v2[1].avi VIDEO: [DIV3] 356x240 24bpp 30.00 fps 343.0 kbps (41.9 kbyte/s) DShow DLL : 17.141s 17.238s 17.190s 17.225s VfW DLL : 30.359s 30.260s 30.375s 30.465s DivX4Linux : 11.497s 11.436s 11.387s 11.465s FFmpeg-old : 13.777s 13.817s 13.786s 13.824s FFmpeg-new : 12.856s 12.785s 12.891s 12.797s File: /3d/divx/Coyote.Ugly.Sample-highbitrate-atmos.avi VIDEO: [DIV3] 640x480 24bpp 25.00 fps 1867.1 kbps (227.9 kbyte/s) DShow DLL : 19.972s 19.829s 19.842s 19.872s VfW DLL : 19.468s 19.204s 19.212s 19.150s DivX4Linux : 15.519s 15.455s 15.455s 15.480s FFmpeg-old : 21.105s 20.992s 21.014s 21.068s FFmpeg-new : 18.827s 18.845s 18.813s 18.836s File: /3b/huge_bands.avi VIDEO: [DIV3] 640x512 24bpp 29.97 fps 924.8 kbps (112.9 kbyte/s) DShow DLL : 15.387s 15.381s 15.314s 15.354s VfW DLL : 14.932s 14.892s 14.836s 14.903s DivX4Linux : 11.012s 10.985s 11.032s 11.023s FFmpeg-old : 20.668s 20.789s 20.673s 20.727s FFmpeg-new : 15.505s 15.541s 15.476s 15.501s File: /3d/divx/sample.light.it.up.avi VIDEO: [DIV3] 640x352 24bpp 23.98 fps 823.5 kbps (100.5 kbyte/s) DShow DLL : 14.271s 14.365s 14.341s 14.333s VfW DLL : 13.777s 13.817s 13.820s 13.837s DivX4Linux : 11.817s 11.829s 11.863s 11.802s FFmpeg-old : 12.548s 12.528s 12.550s 12.549s FFmpeg-new : 12.680s 12.717s 12.700s 12.687s files are from ftp.mplayerhq.hu all test done 4 times (4 V: benchmark values per line). sync and cat file >/dev/null done before each test. cpu: celeron2-600 @ 900 (100MHz fsb), 256MB PC133 sdram 2/2/2 flags: -nosound -vo null FFmpeg-old: mplayer compiled wiht libavcodec from mplayer cvs FFmpeg-new: mplayer compiled with libavcodec from ffmpeg cvs, and cpuinfo.c replaced with teh old, working one. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From mplayer at blue.cpoint.net Mon Jul 30 16:02:19 2001 From: mplayer at blue.cpoint.net (Paul Holcomb) Date: Mon, 30 Jul 2001 09:02:19 -0500 Subject: [Mplayer-users] Fast forward bug Message-ID: <20010730090219.A30820@cpoint.net> I've discovered a bug that apparently only manifests itself when fast forwarding. Occasionally, I will use mplayer to spot check MPEG2 files that I am encoding and will quickly fast forward through the entire file. However, when crossing 43 minutes (according to the OSD), it starts playing at the beginning of the file again. This problem is easily repeatable with every one of these files, which are 6Mbit 720x480 NTSC MPEG2 PS. In addition, I can repeat the problem with a number of other formats, including DivX. At first, I thought the problem was size related, but since the DivX files especially are so much smaller that doesn't seem logical. I have also had at least one other person verify the problem with different hardware and files. I've used both MPlayer-0.17a_IdegCounter, and also yesterday's (20010729) CVS version to verify this bug. Forgive me if this bug has been posted before, but I didn't see it on the list. -- Paul Holcomb *pholcomb \@ cpoint net* Sr. Network Engineer Counterpoint Networking, Inc. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From steve at daviesfam.org Mon Jul 30 16:08:55 2001 From: steve at daviesfam.org (Stephen Davies) Date: Mon, 30 Jul 2001 15:08:55 +0100 (BST) Subject: [Mplayer-users] Fast forward bug In-Reply-To: <20010730090219.A30820@cpoint.net> Message-ID: On Mon, 30 Jul 2001, Paul Holcomb wrote: > However, when crossing 43 minutes (according to the OSD), it starts > playing at the beginning of the file again. This problem is easily > repeatable with every one of these files, which are 6Mbit 720x480 > NTSC MPEG2 PS. It'll be because you cross the 2GB boundary. I have a patch to add 64-bit offset support which I'm just finalizing to go into the CVS version. Steve _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Mon Jul 30 16:49:10 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Mon, 30 Jul 2001 16:49:10 +0200 (MET DST) Subject: [Mplayer-users] No Video Stream found Message-ID: <200107301449.f6UEnAB07365@pheidippides.md.chalmers.se> Hi, it might be a broken file, since no other tools (avidump/aviplay) find anything either, but since I already have 2 files with this happening and both files are >200MB each... Could the stream be "hidden" somewhere? I uploaded 512K to ftp.mplayerhq.hu:/MPlayer/incoming/missing_video_stream.avi gruel ------------------------------------------------------------------- MPlayer 0.17cvs-010725-15:14(C) 2000-2001 Arpad Gereoffy CommandLine: 'missing_video_stream.avi' '-v' Reading /home/lampert/.mplayer/codecs.conf: 15 audio & 34 video codecs Font /home/lampert/.mplayer/font/font.desc loaded successfully! (140 chars) Detected AVI file format! ======= AVI Header ======= us/frame: 33366 (fps=29.971) max bytes/sec: 0 padding: 0 flags: (272) HAS_INDEX IS_INTERLEAVED frames total: 75294 initial: 0 streams: 2 Suggested BufferSize: 0 Size: 400 x 300 ==> Found video stream: 0 ======= STREAM Header ======= Type: vids FCC: div3 (33766964) Flags: 0 Priority: 1463 Language: 0 InitialFrames: 0 Rate: 2996700/100000 = 29.967 Start: 0 Len: 75294 Suggested BufferSize: 33778 Quality 10000 Sample size: 0 found 'bih', 40 bytes of 40 ==> Found audio stream: 1 ======= STREAM Header ======= Type: auds FCC: (0) Flags: 0 Priority: 51230 Language: 8 InitialFrames: 1 Rate: 7963/1 = 7963.000 Start: 0 Len: 20005123 Suggested BufferSize: 3981 Quality -1 Sample size: 1 found 'wf', 30 bytes of 20 ======= WAVE Format ======= Format Tag: 85 (0x55) Channels: 1 Samplerate: 44100 avg byte/sec: 7963 Block align: 1 bits/sample: 0 cbSize: 12 stream_seek: WARNING! Can't seek to 0x494C2EF6 ! stream_seek: WARNING! Can't seek to 0xEB63B54 ! ds_fill_buffer: EOF reached (stream: video) AVI: missing video stream!? contact the author, it may be a bug :( -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dagobert at bail.ddts.net Mon Jul 30 19:53:15 2001 From: dagobert at bail.ddts.net (dagobert) Date: Mon, 30 Jul 2001 19:53:15 +0200 Subject: [Mplayer-users] whats this program Message-ID: <20010730195315.B30198@bail.ddts.net> Hi, what are these nice programms sometimes on the left side on your windowmaker desktop ? process management i guess . Tell me please :) bye Markus -- ICQ.COM UIN#110424304 Operating-System: Linux/2.2.16(i686) Uptime: 7:46pm up 40 days, 20:19, 6 users, load average: 3.44, 3.66, 3.70 _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre at debian.org Mon Jul 30 21:14:31 2001 From: andre at debian.org (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Mon, 30 Jul 2001 21:14:31 +0200 Subject: [Mplayer-users] whats this program In-Reply-To: <20010730195315.B30198@bail.ddts.net> References: <20010730195315.B30198@bail.ddts.net> Message-ID: <20010730211431.A5791@telia.com> dagobert wrote: > what are these nice programms sometimes on the left side on your > windowmaker desktop ? process management i guess . Tell me please :) Are you referring to one of the screenshots on the homepage? Can you please point out which one you mean and I'll try to tell you what application it is? -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dagobert at bail.ddts.net Mon Jul 30 21:23:18 2001 From: dagobert at bail.ddts.net (dagobert) Date: Mon, 30 Jul 2001 21:23:18 +0200 Subject: [Mplayer-users] whats this program In-Reply-To: <20010730211431.A5791@telia.com> Message-ID: <20010730212318.A15271@bail.ddts.net> Hi Andr?! on this image http://192.190.173.45/homepage/images/shot01.jpg the complete right side is new to me (i use kde ) it says mem swp clock, the gif top right, prozess levels mplayer xwd x and the other ones :) Thanks Markus On Mon, 30 Jul 2001, Andr? Dahlqvist wrote: > dagobert wrote: > > > what are these nice programms sometimes on the left side on your > > windowmaker desktop ? process management i guess . Tell me please :) > > Are you referring to one of the screenshots on the homepage? Can you please > point out which one you mean and I'll try to tell you what application it > is? > -- > > Andr? Dahlqvist > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users -- ICQ.COM UIN#110424304 Operating-System: Linux/2.2.16(i686) Uptime: 9:20pm up 40 days, 21:54, 2 users, load average: 3.75, 3.59, 3.55 _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From _bil_ at mail.ru Mon Jul 30 21:12:52 2001 From: _bil_ at mail.ru (Billy) Date: Mon, 30 Jul 2001 23:12:52 +0400 Subject: [Mplayer-users] whats this program In-Reply-To: <20010730195315.B30198@bail.ddts.net> References: <20010730195315.B30198@bail.ddts.net> Message-ID: I'v seen on the screenshots the WMdock applet for mplayer. What's this? where can i found it? Mon, 30 Jul 2001 19:53:15 +0200 dagobert ?????: > Hi, > what are these nice programms sometimes on the left side on your > windowmaker desktop ? process management i guess . Tell me please :) > bye Markus > -- > ICQ.COM UIN#110424304 > Operating-System: Linux/2.2.16(i686) > Uptime: 7:46pm up 40 days, 20:19, 6 users, load average: 3.44, 3.66, 3.70 > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From andre at debian.org Mon Jul 30 21:39:17 2001 From: andre at debian.org (=?iso-8859-1?Q?Andr=E9?= Dahlqvist) Date: Mon, 30 Jul 2001 21:39:17 +0200 Subject: [Mplayer-users] whats this program In-Reply-To: <20010730212318.A15271@bail.ddts.net> References: <20010730212318.A15271@bail.ddts.net> Message-ID: <20010730213917.A6331@telia.com> dagobert wrote: > the complete right side is new to me (i use kde ) > it says mem swp clock, the gif top right, > prozess levels mplayer xwd x > and the other ones :) Take a look at this link: http://www.bensinclair.com/dockapp/ I'm sure you'll find most of the dockapps used on the screenshots there. Especially look under the System category. -- Andr? Dahlqvist _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Mon Jul 30 21:54:04 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Mon, 30 Jul 2001 21:54:04 +0200 Subject: [Mplayer-users] difference between divxc32.dll and divxc32f.dll? In-Reply-To: <3B650EB2.2020601@winealley.com> References: <3B650EB2.2020601@winealley.com> Message-ID: <74127991852.20010730215404@gmx.de> Hello Jean-Luc, Monday, July 30, 2001, 9:37:22 AM, you wrote: > I understand one is "fast-motion". > What does it mean exactly? It's an older versions of the ms mpeg 4 V3 codec, which usually keeps bitrate quite low and increases it for high motion scenes, this gives better quality with lower bitrate (1cd movies) for action scenes, but degrades quality for still scenes. Unless you're going to use both fast and low motion and cut together video (like Makefilm TNG does or ProjectDivX). > As far as quality goes, which one do you recommend for encoding movies? If you only use a single codec you should always stick with divx low motion codec, Btw. for good quality rips that fit onto one cd it needs some skill and extra soft, take a look at www.nandub.org and www.doom9.net for guides how to use it to make quality rips (btw. it also improves quality of your 2 cd rips). > Many thanks in advance. -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Mon Jul 30 21:48:54 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Mon, 30 Jul 2001 21:48:54 +0200 Subject: [Mplayer-users] SDL -noxv problema In-Reply-To: References: Message-ID: <80127682387.20010730214854@gmx.de> Hello Andras, Sunday, July 29, 2001, 9:47:15 PM, you wrote: > On Sun, 29 Jul 2001, Arpi wrote: > Hi, >> Hi, >> >> > On Sun, 29 Jul 2001, Felix Buenemann wrote: >> > >> > > On Saturday, 28. July 2001 15:55, you wrote: >> > > > Hi, >> > > > >> > > > I tried -vo sdl -noxv with several movies, and it works only for YUY2 >> > > > (divx decoded by windows dll), and not for YV12 (mpeg files, divx decoded >> > > > by ffdivx). Is it a known bug? I'm using SDL 1.2.0. >> > > No, I'll check it, what exact error do you get? >> > > >> > >> > The picture is black. No error messages. >> > >> I think it's the gcc 2.96 problem then... >> (see DOCS/BUGS, black image with mpeg) >> hmm, maybe it's prob with alphamap stuff or direct memcpy stuff, please edit the codecs.conf for the codec you want to use and comment out line with bgr formats and put a new line with only a format that has other bpp then your XServer (eg. BGR15 when X runs at 24bpp) > I've read DOCS/BUGS. But I have gcc 2.95.3. > Sala >> >> A'rpi / Astral & ESP-team >> >> -- >> mailto:arpi at thot.banki.hu >> http://esp-team.scene.hu -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Mon Jul 30 22:00:41 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Mon, 30 Jul 2001 22:00:41 +0200 Subject: [Mplayer-users] divx brightness In-Reply-To: <20010730131534.03e9df06.erik.almqvist@home.se> References: <20010729094404.20f53f49.erik.almqvist@home.se> <17334413163.20010729195425@gmx.de> <20010730131534.03e9df06.erik.almqvist@home.se> Message-ID: <137128388953.20010730220041@gmx.de> Hello Erik, Monday, July 30, 2001, 1:15:34 PM, you wrote: > On Sun, 29 Jul 2001 19:54:25 +0200 > Felix Buenemann wrote: >> Hello Erik, >> >> Sunday, July 29, 2001, 9:44:04 AM, you wrote: >> >> > My divx playback is very dark. >> > How do I set brightness? >> > Are there settings for contrasts etc as well? >> there are, potentionally, but code was never used in mplayer. Look at >> the commented out code in older mplayer.c (moved to dec_video.c and >> removed unused stuff nowadays.) > Does this mean there will be such a feature implemented soon? yes, it's planned for libvo2. > /erik >> >> -- >> Best regards, >> Felix mailto:atmosfear at users.sourceforge.net >> > __________________________ > Erik Almqist > erik.almqvist at home.se > http://ealm.dyndns.org:180 -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Mon Jul 30 22:29:58 2001 From: arpi at thot.banki.hu (Arpi) Date: Mon, 30 Jul 2001 22:29:58 +0200 (CEST) Subject: [Mplayer-users] difference between divxc32.dll and divxc32f.dll? In-Reply-To: <74127991852.20010730215404@gmx.de> Message-ID: <200107302029.WAA43188@thot.banki.hu> Hi, > > I understand one is "fast-motion". > > > What does it mean exactly? hey, we are sooooooo offtopic nowdays... > It's an older versions of the ms mpeg 4 V3 codec, which usually keeps > bitrate quite low and increases it for high motion scenes, this gives > better quality with lower bitrate (1cd movies) for action scenes, but > degrades quality for still scenes. Unless you're going to use both > fast and low motion and cut together video (like Makefilm TNG does or > ProjectDivX). isn't there any encoders supporting this by default? i mean, you can select areas of movie in teh encoder, and say: use xxx kbps with xxx codec for these frames. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Mon Jul 30 22:52:31 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Mon, 30 Jul 2001 22:52:31 +0200 Subject: [Mplayer-users] Real Benchmarking In-Reply-To: <200107261320.f6QDKDu01127@alison.hemmet.chalmers.se> References: <200107261320.f6QDKDu01127@alison.hemmet.chalmers.se> Message-ID: <177131498695.20010730225231@gmx.de> Hello Christoph, Thursday, July 26, 2001, 3:20:12 PM, you wrote: > Hi Arpi, > since you included this great benchmarking option a while ago and everybody > keeps talking about how fast his CPU and/or video card is with which version > of what, how about putting a few (legal) reference files for benchmarking on > the FTP? > Say, one MPEG1 (low res, low bitrate), one MPEG2 (high res, high bitrate), > one DivX-AVI (low,low), one DivX-AVI (high, high). Or take MPEG4 instead of > DivX, whatever. OK, I've today created sample clips for alls tuff from the same source, scene has low and very high motion (it's a 3:07minutes action scene from The Matrix, megawidescreen :). These are the formats I created: 1. DVD Quality Video: 720x540 mpeg2 video, bitrate similiar to DVD Audio: 16Bit Stereo, 48kHz, 384kbps mpeg 2 audio, error correction, normalized (well ac3 would be nice, anyone knows a soft to multiplex mpeg2 with ac3 streams?) Filesize: 126MB 2. VCD Quality Video: 352x288 mpeg1 video, bitrate similiar to VCD Audio: 16Bit Stereo, 44.1kHz, 224kbps mpeg 2 audio, no error correction, normalized Filesize: 31.2MB 3. Full DVD Quality (3CD) DivX ;-) Video: 720x576 low motion divx, 1600kbps, crispness 100, variable keyframe delay Audio: 16Bit, Dolby AC3, 384kbps, 48kHz Filesize: 45.8MB 4. Near DVD Quality (2CD) DivX ;-) Video: 640x256 low motion divx, 1200kbps, crispness 100, variable keyframe delay Audio: 16Bit, 48kHz VBR MP3 around 160kbps, normalized Filesize: 31.7MB 5. Good quality 1CD DivX ;-) Video: 560x224 low motion divx, 700kbps, crispness 75, variable keyframe delay Audio: 16Bit, 44kHz CBR MP3, 96kbps, normalized Filesize: 18.5MB 6. Low quality DivX ;-) (like converted from mpeg, or broadband streaming video) Video: 352x144 low motion divx, 450kbps, crispness 75, variable keyframe delay Audio: 16Bit, 32kHz divx audio (wma), 64kbps, normalized Filesize: 11.7MB Anything missing here I should also encode? (maybe indeo5) Who cares, ripping tools used: FlaskMPEG 0.6 with CSS mism and bbMPEG encoder (vcd, mpeg2), Nandub 1.0rc2 (vbr, cbr mp3, ac3), VirtualDub 1.4.5 (wma), The Wave Normalize (normalizing), WinAMP (ac3 -> wav), DivX VKI encoder > That way, the posted numbers would at least be a little bit comparible and I > DOCS/SPEED will be less... well... non-comparible. > gruel -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Mon Jul 30 00:06:33 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Mon, 30 Jul 2001 00:06:33 +0200 Subject: [Mplayer-users] Real Benchmarking In-Reply-To: <200107261320.f6QDKDu01127@alison.hemmet.chalmers.se> References: <200107261320.f6QDKDu01127@alison.hemmet.chalmers.se> Message-ID: <0107300006330F.15797@astral> On Thursday, 26. July 2001 15:20, you wrote: > Hi Arpi, > > since you included this great benchmarking option a while ago and everybody > keeps talking about how fast his CPU and/or video card is with which > version of what, how about putting a few (legal) reference files for > benchmarking on the FTP? > Say, one MPEG1 (low res, low bitrate), one MPEG2 (high res, high bitrate), > one DivX-AVI (low,low), one DivX-AVI (high, high). Or take MPEG4 instead of > DivX, whatever. I could create such files from a dvd movie trailer, even the same for all types. > > That way, the posted numbers would at least be a little bit comparible and > I DOCS/SPEED will be less... well... non-comparible. > > gruel -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Mon Jul 30 00:16:06 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Mon, 30 Jul 2001 00:16:06 +0200 Subject: [Mplayer-users] SDL -noxv problema In-Reply-To: References: Message-ID: <0107300016060G.15797@astral> On Sunday, 29. July 2001 11:40, you wrote: > On Sun, 29 Jul 2001, Felix Buenemann wrote: > > On Saturday, 28. July 2001 15:55, you wrote: > > > Hi, > > > > > > I tried -vo sdl -noxv with several movies, and it works only for YUY2 > > > (divx decoded by windows dll), and not for YV12 (mpeg files, divx > > > decoded by ffdivx). Is it a known bug? I'm using SDL 1.2.0. > > > > No, I'll check it, what exact error do you get? > > The picture is black. No error messages. > hmm, which version of mplayer are you using? > > It works fine here with SDL 1.2.1 cvs and mplayer cvs, with both avi and > > mpeg. > > Maybe I'll upgrade SDL. > > > > Sala > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users -- Best Regards, Felix _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Mon Jul 30 23:18:14 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Mon, 30 Jul 2001 23:18:14 +0200 (MET DST) Subject: [Mplayer-users] Real Benchmarking In-Reply-To: <177131498695.20010730225231@gmx.de> Message-ID: Hi Felix, > 6. Low quality DivX ;-) (like converted from mpeg, or broadband > streaming video) > Video: 352x144 low motion divx, 450kbps, crispness 75, variable > keyframe delay > Audio: 16Bit, 32kHz divx audio (wma), 64kbps, normalized > Filesize: 11.7MB > > Anything missing here I should also encode? (maybe indeo5) Sounds nice... I'd rather prefer a TV-like resolution for low-res, e.g. 320x240 or 352x288. But I guess that does not really matter. Don't put the files in CVS ;-) And maybe #1 is too large, after all it's just for benchmarking, not for creating as much traffic as possible... gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From luca at lucarella.com.ar Mon Jul 30 23:25:43 2001 From: luca at lucarella.com.ar (Leandro Lucarella) Date: Mon, 30 Jul 2001 18:25:43 -0300 (ART) Subject: [Mplayer-users] Silly question: crispness Message-ID: <200107302231.SAA24736@burns.luca.2y.net> What is crispness??? -- LUCA - Leandro Lucarella ------------------------ luca at lucarella.com.ar http://www.luca.2y.net LICQ UIN: 2847576 ------------------------ Usando Debian GNU/Linux _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Mon Jul 30 23:35:18 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Mon, 30 Jul 2001 23:35:18 +0200 Subject: [Mplayer-users] new ffmpeg stuff In-Reply-To: <200107301316.PAA58738@thot.banki.hu> References: <20010730135346.A99266@hoth.amu.edu.pl> <200107301316.PAA58738@thot.banki.hu> Message-ID: <20010730233518.A22019@hoth.amu.edu.pl> On Mon, Jul 30, 2001 at 03:16:38PM +0200, Arpi wrote: > Hi, > > My results: > My results (made with new benchamrk script): FreeBSD 4.3 P3 750: mmx, mmx2, mtrr Trailer: Space_Cowboys.avi VIDEO: [DIV3] 480x200 24bpp 24.00 fps 154.3 kbps (18.8 kbyte/s) DShow DLL : 9.884s 9.891s 9.873s 9.845s VfW DLL : 16.824s 16.864s 16.871s 16.842s FFmpeg-mpl : 9.347s 9.335s 9.323s 9.325s FFmpeg-cvs : 8.048s 8.059s 8.024s 8.038s Trailer: MI2.avi VIDEO: [DIV3] 480x204 24bpp 24.00 fps 604.8 kbps (73.8 kbyte/s) DShow DLL : 16.389s 16.368s 16.302s 16.391s VfW DLL : 16.067s 16.059s 16.070s 16.482s FFmpeg-mpl : 13.516s 13.388s 13.340s 13.398s FFmpeg-cvs : 14.725s 15.429s 14.788s 14.734s Trailer: tomb_raider.avi VIDEO: [DIV3] 480x260 24bpp 24.00 fps 649.2 kbps (79.3 kbyte/s) DShow DLL : 20.339s 19.759s 19.781s 19.779s VfW DLL : 19.527s 19.521s 19.550s 19.546s FFmpeg-mpl : 16.147s 16.103s 16.091s 16.116s FFmpeg-cvs : 17.497s 17.482s 17.490s 17.520s Trailer: wing_commander.avi VIDEO: [DIV3] 640x360 24bpp 24.00 fps 751.0 kbps (91.7 kbyte/s) DShow DLL : 16.564s 16.576s 17.305s 16.853s VfW DLL : 16.446s 16.427s 16.412s 16.416s FFmpeg-mpl : 14.233s 14.251s 14.251s 14.250s FFmpeg-cvs : 13.043s 13.051s 13.025s 13.054s Trailer: dune.avi VIDEO: [DIV3] 624x356 24bpp 24.00 fps 1042.7 kbps (127.3 kbyte/s) DShow DLL : 15.403s 14.733s 14.734s 14.744s VfW DLL : 14.536s 14.533s 14.524s 14.531s FFmpeg-mpl : 12.623s 12.603s 12.591s 12.600s FFmpeg-cvs : 13.423s 13.427s 13.411s 13.437s Trailer: Gladiator.avi VIDEO: [DIV3] 480x272 24bpp 24.00 fps 930.4 kbps (113.6 kbyte/s) DShow DLL : 12.856s 12.824s 12.871s 12.870s VfW DLL : 12.501s 12.502s 12.502s 12.509s FFmpeg-mpl : 12.359s 12.356s 12.371s 12.368s FFmpeg-cvs : 13.200s 13.389s 13.284s 13.252s Trailer: hannibal.avi VIDEO: [DIV3] 480x260 24bpp 24.00 fps 153.8 kbps (18.8 kbyte/s) DShow DLL : 14.220s 12.963s 12.950s 12.917s VfW DLL : 22.502s 22.539s 22.537s 22.509s FFmpeg-mpl : 13.177s 13.206s 13.214s 13.235s FFmpeg-cvs : 10.790s 10.802s 10.827s 10.812s Trailer: Highlander4.avi VIDEO: [DIV3] 520x310 24bpp 24.00 fps 892.7 kbps (109.0 kbyte/s) DShow DLL : 21.348s 20.733s 20.776s 20.821s VfW DLL : 20.480s 20.491s 20.484s 20.599s FFmpeg-mpl : 16.881s 16.929s 16.920s 16.883s FFmpeg-cvs : 18.746s 18.728s 18.757s 18.815s k6-2 333 mmx, 3Dnow Trailer: Space_Cowboys.avi VIDEO: [DIV3] 480x200 24bpp 24.00 fps 154.3 kbps (18.8 kbyte/s) DShow DLL : 26.438s 26.318s 26.358s 26.310s VfW DLL : 25.484s 25.335s 25.507s 25.675s FFmpeg-mpl : 27.219s 27.370s 27.209s 27.317s FFmpeg-cvs : 25.424s 25.343s 25.508s 25.205s Trailer: MI2.avi VIDEO: [DIV3] 480x204 24bpp 24.00 fps 604.8 kbps (73.8 kbyte/s) DShow DLL : 42.032s 42.060s 41.955s 41.946s VfW DLL : 40.521s 40.486s 40.709s 40.648s FFmpeg-mpl : 41.723s 41.548s 41.832s 41.680s FFmpeg-cvs : 40.339s 40.371s 40.281s 40.253s Trailer: tomb_raider.avi VIDEO: [DIV3] 480x260 24bpp 24.00 fps 649.2 kbps (79.3 kbyte/s) DShow DLL : 51.693s 51.662s 51.502s 51.465s VfW DLL : 50.324s 50.304s 50.331s 50.348s FFmpeg-mpl : 49.858s 49.842s 49.853s 49.990s FFmpeg-cvs : 47.877s 47.809s 47.993s 48.187s Trailer: wing_commander.avi VIDEO: [DIV3] 640x360 24bpp 24.00 fps 751.0 kbps (91.7 kbyte/s) DShow DLL : 43.280s 43.112s 43.247s 43.278s VfW DLL : 43.734s 42.178s 42.146s 42.189s FFmpeg-mpl : 39.609s 39.607s 39.765s 39.632s FFmpeg-cvs : 39.257s 39.153s 39.202s 39.187s Trailer: Dune.avi VIDEO: [DIV3] 624x356 24bpp 24.00 fps 1042.7 kbps (127.3 kbyte/s) DShow DLL : 38.749s 38.705s 38.753s 38.580s VfW DLL : 36.238s 36.169s 36.242s 36.130s FFmpeg-mpl : 40.143s 40.036s 40.235s 40.051s FFmpeg-cvs : 37.897s 37.687s 37.951s 37.672s Trailer: Gladiator.avi VIDEO: [DIV3] 480x272 24bpp 24.00 fps 930.4 kbps (113.6 kbyte/s) DShow DLL : 38.471s 38.753s 38.266s 38.283s VfW DLL : 35.479s 35.503s 35.381s 35.483s FFmpeg-mpl : 38.847s 38.545s 38.519s 38.584s FFmpeg-cvs : 36.816s 36.747s 36.773s 36.653s Trailer: hannibal.avi VIDEO: [DIV3] 480x260 24bpp 24.00 fps 153.8 kbps (18.8 kbyte/s) DShow DLL : 34.324s 34.141s 34.077s 34.252s VfW DLL : 33.412s 33.442s 33.289s 33.456s FFmpeg-mpl : 38.261s 38.555s 38.218s 38.429s FFmpeg-cvs : 33.682s 33.792s 33.701s 33.697s Trailer: Highlander4.avi VIDEO: [DIV3] 520x310 24bpp 24.00 fps 892.7 kbps (109.0 kbyte/s) DShow DLL : 52.729s 52.847s 52.870s 52.809s VfW DLL : 51.815s 51.796s 51.735s 52.126s FFmpeg-mpl : 52.525s 52.399s 52.467s 52.433s FFmpeg-cvs : 51.379s 51.878s 51.323s 51.575s -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From steve at daviesfam.org Tue Jul 31 00:17:08 2001 From: steve at daviesfam.org (Stephen Davies) Date: Mon, 30 Jul 2001 23:17:08 +0100 (BST) Subject: [Mplayer-users] Silly question: crispness In-Reply-To: <200107302231.SAA24736@burns.luca.2y.net> Message-ID: On Mon, 30 Jul 2001, Leandro Lucarella wrote: > What is crispness??? A video processing effect that "sharpens up" transitions in the picture. For low bandwidth video a little crispening can help the picture look better. Its basically a high frequency boost. Too much tends to make the picture look cartoony. Steve _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From vir182 at yahoo.de Tue Jul 31 01:00:20 2001 From: vir182 at yahoo.de (=?iso-8859-1?q?Max=20Hofer?=) Date: Tue, 31 Jul 2001 01:00:20 +0200 (CEST) Subject: [Mplayer-users] Audio Problems - Buffer Message-ID: <20010730230020.808.qmail@web5203.mail.yahoo.com> i play an avi file and after 43.8 seconds the video goes in a kind of slow motion. It has something to do with the audio because if i play the file without sound, the video works very well. My CPU is not the best, but runing "top" gives me a CPU usage of only 45%. so i suppose it has to do with the sound/audio. specially if i look at the audio-video sync. it goes out of snych like crazy, just from the begining, and after the 43.8 seconds a strange end-of-buffer error occurs sending the video in slow motion (sound and video are working prefectly till this point) and i have no sound at all. ----------------------------------------- MPlayer 0.18pre5(C) 2000-2001 Arpad Gereoffy CommandLine: '-v' '-nofs' 'lexx_1.0_i_worship_his_shadow[DVD-Absalom].avi' Reading /home/max/.mplayer/codecs.conf: 15 audio & 32 video codecs Font /home/max/.mplayer/font/font.desc loaded successfully! (138 chars) Detected AVI file format! ======= AVI Header ======= us/frame: 41712 (fps=23.974) max bytes/sec: 0 padding: 0 flags: (272) HAS_INDEX IS_INTERLEAVED frames total: 134423 initial: 0 streams: 2 Suggested BufferSize: 0 Size: 512 x 384 ==> Found video stream: 0 ======= STREAM Header ======= Type: vids FCC: div3 (33766964) Flags: 0 Priority: 0 Language: 0 InitialFrames: 0 Rate: 1000000/41712 = 23.974 Start: 0 Len: 134423 Suggested BufferSize: 133906 Quality 10000 Sample size: 0 found 'bih', 40 bytes of 40 ==> Found audio stream: 1 ======= STREAM Header ======= Type: auds FCC: (0) Flags: 0 Priority: 0 Language: 0 InitialFrames: 0 Rate: 44100/1152 = 38.281 Start: 0 Len: 214643 Suggested BufferSize: 1044 Quality -1 Sample size: 0 found 'wf', 30 bytes of 20 ======= WAVE Format ======= Format Tag: 85 (0x55) Channels: 2 Samplerate: 44100 avg byte/sec: 12279 Block align: 1152 bits/sample: 0 cbSize: 12 Found movie at 0x280C - 0x2B5ED30C Reading INDEX block, 349066 chunks for 134423 frames AVI index offset: 10248 Auto-selected AVI video ID = 0 Auto-selected AVI audio ID = 1 AVI: Searching for audio stream (id:1) AVI video length=724617277 VIDEO: [DIV3] 512x384 24bpp 23.97 fps 1033.9 kbps (126.2 kbyte/s) [V] filefmt:3 fourcc:0x33564944 size:512x384 fps:23.97 ftime:=0.0417 Detected audio codec: [mp3] drv:1 (MPEG layer-2, layer-3) Initializing audio codec... dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer mp3lib: Processor ID: 660 mp3lib: Using Pentium-MMX optimized decore. AUDIO: srate=44100 chans=2 bps=2 sfmt=0x10 ratio: 8000->176400 Detected video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3)) vo_debug: query(Packed YUY2) returned 0x1 vo_debug1: out_fmt=Packed YUY2 Loading DLL: /usr/lib/win32/divx_c32.ax OK Using DirectShow codec: divx_c32.ax DShow: using YUY2 colorspace INFO: Win32/DShow video codec init OK! vo_debug2: out_fmt=Packed YUY2 VO: [xmga] 512x384 => 512x384 Packed YUY2 VO: Description: X11 (Matrox G200/G400 overlay in window using /dev/mga_vid) VO: Author: Zoltan Ponekker video_out->init(512x384->512x384,flags=0,'MPlayer',0x32595559) vo_debug3: out_fmt=Packed YUY2 vo: X11 color mask: FFFF (R:F800 G:7E0 B:1F) vo: X11 running at 1280x1024 depth: 16 (":0.0" => local display) INFO: Video OUT driver init OK! AO: [oss] 44100Hz Stereo Signed 16-bit (Little-Endian) AO: Description: OSS/ioctl audio output AO: Author: A'rpi ao2: 44100 Hz 2 chans Signed 16-bit (Little-Endian) audio_setup: using '/dev/dsp' dsp device audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian)) audio_setup: using 44100 Hz samplerate (requested: 44100) audio_setup: frags: 2/2 (32768 bytes/frag) free: 65536 Initial frame delay A: 0 V: 0 AVI Initial frame delay: 0.000 START: a_pts=0.042 v_pts=0.000 Start playing... Initial PTS delay: 0.687 sec (calculated: -0.314) v: audio_delay=0.687 buffer_delay=0.314 a.pts=1.001 v.pts=0.000 A: 141.3 ( 140.4) V: 43.5 A-V: 96.926 ct: 4.346 1044 24% 12% 3.8% 0 DEMUXER: Too many (2359 in 8390690 bytes) video packets in the buffer! (maybe you play a non-interleaved stream/file or video codec failed) ds_fill_buffer: EOF reached (stream: audio) A: 141.7 ( 140.9) V: 44.4 A-V: 96.513 ct: 4.442 1067 24% 12% 3.8% 0 ------------------------------------------- i tried to play with -ao but the same problem occured with alsa5 and SDL. the audio seems to run too fast. so i thought maybe the audio was sampled at 48KHz, but using the -srate 48000 didn't change anything. this video has an intro of 10 seconds. may it be that this intro (which probably was only joined to the rest of the movie) has another audio/video sample rate than the rest of the movie and this is confusing the player? This had this error message: ------------ DEMUXER: Too many (xxxxx in yyyyyyy bytes) video packets in the buffer! ----------- already in other movies (xxxxx and yyyyyyy some numbers. did anyone have the same experience? what can i change to stop this audio/video synch problem? __________________________________________________________________ Do You Yahoo!? Gesendet von Yahoo! Mail - http://mail.yahoo.de _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 31 01:05:59 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 31 Jul 2001 01:05:59 +0200 (CEST) Subject: [Mplayer-users] Audio Problems - Buffer In-Reply-To: <20010730230020.808.qmail@web5203.mail.yahoo.com> Message-ID: <200107302305.BAA19268@thot.banki.hu> Hi, > Detected AVI file format! > A: 141.3 ( 140.4) V: 43.5 A-V: 96.926 ct: 4.346 > 1044 24% 12% 3.8% 0 hmm. > did anyone have the same experience? what can i change > to stop this audio/video synch problem? 1. try with switch -ni 2. is your system fast enough (including vga & bus) ? check _idle_ cpu usage with top when playing this 3. all files are bad, or only this one? 4. RTFM A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From johannes.feigl at mcse.at Tue Jul 31 09:34:55 2001 From: johannes.feigl at mcse.at (Johannes Feigl) Date: Tue, 31 Jul 2001 09:34:55 +0200 Subject: [Mplayer-users] Re: DVB-s References: <200107302024.WAA37244@thot.banki.hu> Message-ID: <000f01c11993$4b19e640$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* > > today i've tried to put a simple mpeg-1 file to the VDR, a programm for > > recording and playback MPEG2-Stream [Multiplexed PES ... i think you know]. > > > > it worked for me ... > > > > so we need a fast mpeg1 or mpeg2 encorder for the output to the dvb-s... > > > > the quality is very good !!! > ok. > > btw, will i got such card for testing/development? well, as i told you, the german manufactor of dvb-s boars - Galaxis - would help us in too ways: 1) the would lend us (you) such a card or 2) you could bought the card for 329,- (excluding sales taxes) inst?ad of about 430,- DM maybe I could ask reseller, but I don't think they would give us such a card ... mfg Johannes _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lists at reserv.at Tue Jul 31 10:57:29 2001 From: lists at reserv.at (Martin Aumueller) Date: Tue, 31 Jul 2001 10:57:29 +0200 Subject: [Mplayer-users] Silly question: crispness In-Reply-To: <200107302231.SAA24736@burns.luca.2y.net>; from luca@lucarella.com.ar on Mon, Jul 30, 2001 at 06:25:43PM -0300 References: <200107302231.SAA24736@burns.luca.2y.net> Message-ID: <20010731105729.A498@tortoise.alexandrinum.de> On 30. Juli 2001 Leandro Lucarella wrote: > What is crispness??? For very low bitrates this parameter is the trade-off between ugly looking pictures, but at the full frame rate per second, and between nicer pictures but fewer ones. The crisper the more pictures. Martin _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dagobert at bail.ddts.net Tue Jul 31 11:56:26 2001 From: dagobert at bail.ddts.net (dagobert) Date: Tue, 31 Jul 2001 11:56:26 +0200 Subject: [Mplayer-users] font.desc ?? Message-ID: <20010731115626.A21754@bail.ddts.net> Hi, is it why my osd is not working. it cant find my font.desc file. i dont have one(slackware8.0) what do i do ? thank you Markus -- ICQ.COM UIN#110424304 Operating-System: Linux/2.2.16(i686) Uptime: 11:53am up 41 days, 12:27, 2 users, load average: 3.79, 3.62, 3.62 _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 31 12:10:34 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 31 Jul 2001 12:10:34 +0200 (CEST) Subject: [Mplayer-users] font.desc ?? In-Reply-To: <20010731115626.A21754@bail.ddts.net> Message-ID: <200107311010.MAA68802@thot.banki.hu> Hi, > Hi, > is it why my osd is not working. it cant find my font.desc file. i > dont have one(slackware8.0) what do i do ? RTFM (DOCS/OSD+SUB), what else? :) download it from www.mplayerhq.hu... A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From as at sci.fi Tue Jul 31 12:13:01 2001 From: as at sci.fi (Anssi Saari) Date: Tue, 31 Jul 2001 13:13:01 +0300 Subject: [Mplayer-users] Re: Audio Problems - Buffer In-Reply-To: <200107302305.BAA19268@thot.banki.hu>; from arpi@thot.banki.hu on Tue, Jul 31, 2001 at 01:05:59AM +0200 References: <20010730230020.808.qmail@web5203.mail.yahoo.com> <200107302305.BAA19268@thot.banki.hu> Message-ID: <20010731131301.A1931@sci.fi> On Tue, Jul 31, 2001 at 01:05:59AM +0200, Arpi wrote: > Hi, > > > Detected AVI file format! > > > A: 141.3 ( 140.4) V: 43.5 A-V: 96.926 ct: 4.346 > > 1044 24% 12% 3.8% 0 > > hmm. It looks like the VBR audio issue I had once upon a time (i.e. need to use -ni -mc 0). Can this really not be detected while playing? After all, Media Player in Windows seems to be able to handle this kind of video. _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From paul at groovygraphics.com Tue Jul 31 12:23:29 2001 From: paul at groovygraphics.com (Paul Kane) Date: Tue, 31 Jul 2001 13:23:29 +0300 Subject: [Mplayer-users] divx brightness References: <20010729094404.20f53f49.erik.almqvist@home.se> <17334413163.20010729195425@gmx.de> <20010730131534.03e9df06.erik.almqvist@home.se> <137128388953.20010730220041@gmx.de> Message-ID: <001401c119aa$e4751e60$6100a8c0@groovygraphics> here is a small patch for mplayer.c the contrast can be cotrolled with '1','2' keys brightness - '3','4' hue - '5','6' saturation - '7','8' it works only for divxds codec. paul ----- Original Message ----- From: "Felix Buenemann" To: "Erik Almqvist" Sent: Monday, July 30, 2001 11:00 PM Subject: Re[2]: [Mplayer-users] divx brightness > Hello Erik, > > Monday, July 30, 2001, 1:15:34 PM, you wrote: > > > On Sun, 29 Jul 2001 19:54:25 +0200 > > Felix Buenemann wrote: > > >> Hello Erik, > >> > >> Sunday, July 29, 2001, 9:44:04 AM, you wrote: > >> > >> > My divx playback is very dark. > >> > How do I set brightness? > >> > Are there settings for contrasts etc as well? > >> there are, potentionally, but code was never used in mplayer. Look at > >> the commented out code in older mplayer.c (moved to dec_video.c and > >> removed unused stuff nowadays.) > > > > Does this mean there will be such a feature implemented soon? > yes, it's planned for libvo2. > > > /erik > > >> > >> -- > >> Best regards, > >> Felix mailto:atmosfear at users.sourceforge.net > >> > > > __________________________ > > Erik Almqist > > erik.almqvist at home.se > > http://ealm.dyndns.org:180 > > > -- > Best regards, > Felix mailto:atmosfear at users.sourceforge.net > > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users > _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dagobert at bail.ddts.net Tue Jul 31 12:16:48 2001 From: dagobert at bail.ddts.net (dagobert) Date: Tue, 31 Jul 2001 12:16:48 +0200 Subject: [Mplayer-users] font.desc ?? In-Reply-To: <200107311010.MAA68802@thot.banki.hu> Message-ID: <20010731121648.A26107@bail.ddts.net> Hi Arpi! i ll try. the only occurence of "font.desc" is in mplayer.1 :) On Tue, 31 Jul 2001, Arpi wrote: > Hi, > > > Hi, > > is it why my osd is not working. it cant find my font.desc file. i > > dont have one(slackware8.0) what do i do ? > > RTFM (DOCS/OSD+SUB), what else? :) > > download it from www.mplayerhq.hu... > > > A'rpi / Astral & ESP-team > > -- > mailto:arpi at thot.banki.hu > http://esp-team.scene.hu > > _______________________________________________ > Mplayer-users mailing list > Mplayer-users at lists.sourceforge.net > http://lists.sourceforge.net/lists/listinfo/mplayer-users -- ICQ.COM UIN#110424304 Operating-System: Linux/2.2.16(i686) Uptime: 12:16pm up 41 days, 12:49, 2 users, load average: 3.86, 3.73, 3.65 _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From paul at groovygraphics.com Tue Jul 31 12:26:30 2001 From: paul at groovygraphics.com (Paul Kane) Date: Tue, 31 Jul 2001 13:26:30 +0300 Subject: [Mplayer-users] divx brightness References: <20010729094404.20f53f49.erik.almqvist@home.se> <17334413163.20010729195425@gmx.de> <20010730131534.03e9df06.erik.almqvist@home.se> <137128388953.20010730220041@gmx.de> Message-ID: <004101c119ab$4533a8c0$6100a8c0@groovygraphics> and here is the patch :( paul -------------- next part -------------- A non-text attachment was scrubbed... Name: divxds_ctrl_patch.bz2 Type: application/octet-stream Size: 859 bytes Desc: not available URL: From atmosfear at users.sourceforge.net Tue Jul 31 12:26:00 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Tue, 31 Jul 2001 12:26:00 +0200 Subject: [Mplayer-users] difference between divxc32.dll and divxc32f.dll? In-Reply-To: <200107302029.WAA43188@thot.banki.hu> References: <200107302029.WAA43188@thot.banki.hu> Message-ID: <5715526225.20010731122600@gmx.de> Hello Arpi, Monday, July 30, 2001, 10:29:58 PM, you wrote: > Hi, >> > I understand one is "fast-motion". >> >> > What does it mean exactly? > hey, we are sooooooo offtopic nowdays... >> It's an older versions of the ms mpeg 4 V3 codec, which usually keeps >> bitrate quite low and increases it for high motion scenes, this gives >> better quality with lower bitrate (1cd movies) for action scenes, but >> degrades quality for still scenes. Unless you're going to use both >> fast and low motion and cut together video (like Makefilm TNG does or >> ProjectDivX). > isn't there any encoders supporting this by default? > i mean, you can select areas of movie in teh encoder, and say: use xxx kbps > with xxx codec for these frames. Project DivX, but Nandub is cooler it's multipass vbr. > A'rpi / Astral & ESP-team -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Tue Jul 31 13:05:01 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Tue, 31 Jul 2001 13:05:01 +0200 Subject: [Mplayer-users] Silly question: crispness In-Reply-To: References: Message-ID: <12117867532.20010731130501@gmx.de> Hello Stephen, Tuesday, July 31, 2001, 12:17:08 AM, you wrote: > On Mon, 30 Jul 2001, Leandro Lucarella wrote: >> What is crispness??? > A video processing effect that "sharpens up" transitions in the > picture. For low bandwidth video a little crispening can help the picture > look better. Its basically a high frequency boost. Too much tends to > make the picture look cartoony. But for DivX ;-) (MS MPEG 4 V3) codec, you usually choose maximum crispness for best quality, unless your going for one cd rips, were divx codec tends to drops frames with high crispness (at around 700kbps already), so you might need to decrease crispness to 75 or so to make video fluid (otherwise video looks like skipping once a second or so). Btw. this stuff is way offtopic. > Steve -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jaf.corporation at gmx.at Tue Jul 31 12:40:45 2001 From: jaf.corporation at gmx.at (Johannes Feigl) Date: Tue, 31 Jul 2001 12:40:45 +0200 Subject: [Mplayer-users] Re: DVB-s References: <200107302024.WAA37244@thot.banki.hu> Message-ID: <000d01c119ad$40f13230$6400a8c0@p3> *This message was transferred with a trial version of CommuniGate(tm) Pro* Did you get the mail? here it is again: > > today i've tried to put a simple mpeg-1 file to the VDR, a programm for > > recording and playback MPEG2-Stream [Multiplexed PES ... i think you know]. > > > > it worked for me ... > > > > so we need a fast mpeg1 or mpeg2 encorder for the output to the dvb-s... > > > > the quality is very good !!! > ok. > > btw, will i got such card for testing/development? well, as i told you, the german manufactor of dvb-s boars - Galaxis - would help us in too ways: 1) the would lend us (you) such a card or 2) you could bought the card for 329,- (excluding sales taxes) inst?ad of about 430,- DM maybe I could ask reseller, but I don't think they would give us such a card ... mfg Johannes ----- Original Message ----- From: "Arpi" To: "Johannes Feigl" Sent: Monday, July 30, 2001 10:24 PM Subject: Re: DVB-s > *This message was transferred with a trial version of CommuniGate(tm) Pro* > Hi, > > > today i've tried to put a simple mpeg-1 file to the VDR, a programm for > > recording and playback MPEG2-Stream [Multiplexed PES ... i think you know]. > > > > it worked for me ... > > > > so we need a fast mpeg1 or mpeg2 encorder for the output to the dvb-s... > > > > the quality is very good !!! > ok. > > btw, will i got such card for testing/development? > > > > i write this mail to you because i cannot sent to the mailling list: > > > > Failed to deliver to 'mplayer-users at lists.sourceforge.net' > > SMTP module(domain lists.sourceforge.net) reports: > > host mail.sourceforge.net says: > > 550 mail from 62.46.33.104 rejected: administrative prohibition (host is blacklisted) > > > > do you know anything about ? > no. > but it seems to someone sent SPAM mails from your (or your ISP's?) IP. > you should change smtp server... > > (or if it's your ip -> check sys, maybe you are hacked) > > > A'rpi / Astral & ESP-team > > -- > mailto:arpi at thot.banki.hu > http://esp-team.scene.hu > > _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 31 14:01:43 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 31 Jul 2001 14:01:43 +0200 (CEST) Subject: [Mplayer-users] Re: Audio Problems - Buffer In-Reply-To: <20010731131301.A1931@sci.fi> Message-ID: <200107311201.OAA11914@thot.banki.hu> Hi, > On Tue, Jul 31, 2001 at 01:05:59AM +0200, Arpi wrote: > > Hi, > > > > > Detected AVI file format! > > > > > A: 141.3 ( 140.4) V: 43.5 A-V: 96.926 ct: 4.346 > > > 1044 24% 12% 3.8% 0 > > > > hmm. > > It looks like the VBR audio issue I had once upon a time (i.e. need to > use -ni -mc 0). Can this really not be detected while playing? After all, as i said before, it can be. but it takes long (must read and decode big part of file), and as 99% of files not using VBR, it doens't worth. > Media Player in Windows seems to be able to handle this kind of video. then use it A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From dnaughton at mediaone.net Tue Jul 31 14:14:20 2001 From: dnaughton at mediaone.net (Daniel Naughton) Date: Tue, 31 Jul 2001 07:14:20 -0500 Subject: [Mplayer-users] simple question about codecs - mpegs, avis References: Message-ID: <3B66A11C.7DE860DA@mediaone.net> I've finally got mplayer working. :) There are two file formats that I'm having trouble with picking the right codec. If mpeg1 files can't find a codec. >From ~/.mplayer/codecs.conf videocodec mpeg12 info "MPEG 1 or 2" comment "with postprocessing" status working format 0x10000001 driver libmpeg2 dll "libmpeg2" out YV12 There is no driver libmpeg2 - I use mtv and gtv from smpeg to play the mpeg files as a workaround. What did I miss? Therre were no compile errors during the section of libmpeg, but a driver didn't get compiled. The last file format was avi files. I don't know if there are different types. These play in xanim. I can't find what type of avi format it is. But there is no codec linked in mplayer. (One of them was created with xawtv) Reading config file: /etc/mplayer.conf Reading config file: /home/dan/.mplayer/config Reading /home/dan/.mplayer/codecs.conf: 15 audio & 28 video codecs Font /home/dan/.mplayer/font/font.desc loaded successfully! (495 chars) Detected AVI file format! ==> Found video stream: 0 ==> Found audio stream: 1 WARNING!!! chunksize=-256 (id=????) VIDEO: [] 384x288 16bpp 8.00 fps 14157.5 kbps (1728.2 kbyte/s) [V] filefmt:3 fourcc:0x0 size:384x288 fps: 8.00 ftime:=0.1250 Found audio codec: [pcm] drv:2 (Uncompressed PCM) AUDIO: samplerate=44100 channels=1 bps=2 Can't find codec for video format 0x0 Thanks Dan Naughton _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 31 14:28:38 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 31 Jul 2001 14:28:38 +0200 (CEST) Subject: [Mplayer-users] simple question about codecs - mpegs, avis In-Reply-To: <3B66A11C.7DE860DA@mediaone.net> Message-ID: <200107311228.OAA47528@thot.banki.hu> Hi, > I've finally got mplayer working. :) There are two file formats that > I'm having trouble with picking the right codec. If > > mpeg1 files can't find a codec. > > >From ~/.mplayer/codecs.conf > videocodec mpeg12 > info "MPEG 1 or 2" > comment "with postprocessing" > status working > format 0x10000001 > driver libmpeg2 > dll "libmpeg2" > out YV12 > > There is no driver libmpeg2 - I use mtv and gtv from smpeg to play the > mpeg files as a workaround. What did I miss? Therre were no compile > errors during the section of libmpeg, but a driver didn't get compiled. I don't understand this. mpeg 1/2 support is ALWAYS compiled in. If you can't play the file, read DOCS/BUGREPORTS, and maybe upload the file, we'll check. > Found audio codec: [pcm] drv:2 (Uncompressed PCM) > AUDIO: samplerate=44100 channels=1 bps=2 > Can't find codec for video format 0x0 it's uncompressed file (not yet supported by mplayer) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Tue Jul 31 14:35:55 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Tue, 31 Jul 2001 14:35:55 +0200 Subject: [Mplayer-users] Re: Audio Problems - Buffer In-Reply-To: <200107311201.OAA11914@thot.banki.hu> References: <200107311201.OAA11914@thot.banki.hu> Message-ID: <3723321244.20010731143555@gmx.de> Hello Arpi, Tuesday, July 31, 2001, 2:01:43 PM, you wrote: > Hi, >> On Tue, Jul 31, 2001 at 01:05:59AM +0200, Arpi wrote: >> > Hi, >> > >> > > Detected AVI file format! >> > >> > > A: 141.3 ( 140.4) V: 43.5 A-V: 96.926 ct: 4.346 >> > > 1044 24% 12% 3.8% 0 >> > >> > hmm. >> >> It looks like the VBR audio issue I had once upon a time (i.e. need to >> use -ni -mc 0). Can this really not be detected while playing? After all, > as i said before, it can be. but it takes long (must read and decode > big part of file), and as 99% of files not using VBR, it doens't worth. That's not right, in the past vbr was hardly used, but now as vbr mp3 can easily multiplexed with avi using nandub, number of avis using it will grow! >> Media Player in Windows seems to be able to handle this kind of video. > then use it > A'rpi / Astral & ESP-team -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From jpopl at interia.pl Tue Jul 31 14:38:29 2001 From: jpopl at interia.pl (Jacek =?iso-8859-2?Q?Pop=B3awski?=) Date: Tue, 31 Jul 2001 14:38:29 +0200 Subject: [Mplayer-users] faster codecs? Message-ID: <20010731143829.A1049@localhost.localdomain> I was out of mailing list few days... I heard about new, much faster divx codecs for Windows (I don't mean Linux native ffmpeg codec, now), currently available on www.divx.org, didn't check it yet, but are there any possiblites to use it with mplayer? -- I hate you and you hate me And everybody smiles So money talks and no-one walks But everybody's crawling "Evilution" - Ronnie James Dio _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Tue Jul 31 14:55:01 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Tue, 31 Jul 2001 14:55:01 +0200 (MET DST) Subject: [Mplayer-users] faster codecs? Message-ID: <200107311255.f6VCt1B21047@pheidippides.md.chalmers.se> >I was out of mailing list few days... I heard about new, much faster divx >codecs for Windows (I don't mean Linux native ffmpeg codec, now), currently >available on www.divx.org, didn't check it yet, but are there any possiblites >to use it with mplayer? Hi, 1) There is no divx.org, it's www.divx.com! 2) The codec you speak about is DivX4beta (beta2 now) then. 3) Yes, it's faster than DivX3.11, but not that much to get excited about it. 4) There is also a linux version (libdivxdecore.so) of beta1, beta2 to come soon 5) Safe the best for last: It's already included in mplayer ;-) You just have to enable it, see DOCS/Divx4Linux :-) gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 31 15:05:57 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 31 Jul 2001 15:05:57 +0200 (CEST) Subject: [Mplayer-users] faster codecs? In-Reply-To: <20010731143829.A1049@localhost.localdomain> Message-ID: <200107311305.PAA57636@thot.banki.hu> Hi, > I was out of mailing list few days... I heard about new, much faster divx > codecs for Windows (I don't mean Linux native ffmpeg codec, now), currently > available on www.divx.org, didn't check it yet, but are there any possiblites > to use it with mplayer? RTFM DOCS/Divx4Linux A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 31 15:13:28 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 31 Jul 2001 15:13:28 +0200 (CEST) Subject: [Mplayer-users] bugs? Message-ID: <200107311313.PAA57744@thot.banki.hu> Hi, There was 2 bugs fixed (?) some weeks ago, but I got no feedback about fix. 1. subtitle delays after 1 hour... (float precision prob?) is it solved? 2. some big files doesn't play with -idx / -forceidx (cannot load dll / segfault) is it solved? please, someone who experienced these problems, check it again, and tell me is its solved or not. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From as at sci.fi Tue Jul 31 18:36:58 2001 From: as at sci.fi (Anssi Saari) Date: Tue, 31 Jul 2001 19:36:58 +0300 Subject: [Mplayer-users] Re: Audio Problems - Buffer In-Reply-To: <200107311201.OAA11914@thot.banki.hu>; from arpi@thot.banki.hu on Tue, Jul 31, 2001 at 02:01:43PM +0200 References: <20010731131301.A1931@sci.fi> <200107311201.OAA11914@thot.banki.hu> Message-ID: <20010731193658.A6522@sci.fi> On Tue, Jul 31, 2001 at 02:01:43PM +0200, Arpi wrote: > as i said before, it can be. but it takes long (must read and decode > big part of file), and as 99% of files not using VBR, it doens't worth. Couldn't you just monitor the bit rate of audio frames and if it varies, assume it's VBR and adjust to the situation on the fly? > > Media Player in Windows seems to be able to handle this kind of video. > then use it No, thanks. I have something better :) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From asalamon at elender.hu Tue Jul 31 18:33:02 2001 From: asalamon at elender.hu (Andras Salamon) Date: Tue, 31 Jul 2001 18:33:02 +0200 (CEST) Subject: [Mplayer-users] SDL -noxv problema In-Reply-To: <80127682387.20010730214854@gmx.de> Message-ID: On Mon, 30 Jul 2001, Felix Buenemann wrote: > Hello Andras, > > Sunday, July 29, 2001, 9:47:15 PM, you wrote: > > > On Sun, 29 Jul 2001, Arpi wrote: > > > Hi, > > >> Hi, > >> > >> > On Sun, 29 Jul 2001, Felix Buenemann wrote: > >> > > >> > > On Saturday, 28. July 2001 15:55, you wrote: > >> > > > Hi, > >> > > > > >> > > > I tried -vo sdl -noxv with several movies, and it works only for YUY2 > >> > > > (divx decoded by windows dll), and not for YV12 (mpeg files, divx decoded > >> > > > by ffdivx). Is it a known bug? I'm using SDL 1.2.0. > >> > > No, I'll check it, what exact error do you get? > >> > > > >> > > >> > The picture is black. No error messages. > >> > > >> I think it's the gcc 2.96 problem then... > >> (see DOCS/BUGS, black image with mpeg) > >> > hmm, maybe it's prob with alphamap stuff or direct memcpy stuff, > please edit the codecs.conf for the codec you want to use and comment > out line with bgr formats and put a new line with only a format that > has other bpp then your XServer (eg. BGR15 when X runs at 24bpp) Hi, Mpeg2 has only one format YV12. I cannot change it to BGR15. Sala > > I've read DOCS/BUGS. But I have gcc 2.95.3. > > > Sala > > >> > >> A'rpi / Astral & ESP-team > >> > >> -- > >> mailto:arpi at thot.banki.hu > >> http://esp-team.scene.hu > > > _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From vir182 at yahoo.de Tue Jul 31 18:43:35 2001 From: vir182 at yahoo.de (=?iso-8859-1?q?Max=20Hofer?=) Date: Tue, 31 Jul 2001 18:43:35 +0200 (CEST) Subject: [Mplayer-users] Audio Problems - Buffer In-Reply-To: <200107302305.BAA19268@thot.banki.hu> Message-ID: <20010731164335.19042.qmail@web5202.mail.yahoo.com> On Tue, 31 Jul 2001 01:05:59 +0200 (CEST) Arpi > wrote: > Hi, > > > Detected AVI file format! > > > A: 141.3 ( 140.4) V: 43.5 A-V: 96.926 ct: 4.346 > > 1044 24% 12% 3.8% 0 > > 1. try with switch -ni i did. now the movie plays in normal speed, with audio, but the A/V is still going out of synch (and i'm not able to fix that with the +/-keys). i gonna play around with the -mc option, maybe that will help. > 2. is your system fast enough (including vga & bus) ? > check _idle_ cpu usage with top when playing this it seems. the idle time jumps between 20% and 50% during i play the movie. > 3. all files are bad, or only this one? 1st i had this problems only from encodes of a guy on IRC. i was not worried about it. but then i got another encode with the same problem. so i thought maybe someone else found a workaround (or if there is none, i report this "error"). > 4. RTFM i RTFM. and you know - it doesn't help with answers like: -------- Q: I got DEMUXER: Too many (328 in 83968129 bytes) audio packets in the buffer ERROR A: split your file to 8MB pieces -------- i'm not the guy who asks before i read the docs/mans. but if i still ask, means the man/docs didn't give me the answers i was searching for. mfg Rach __________________________________________________________________ Do You Yahoo!? Gesendet von Yahoo! Mail - http://mail.yahoo.de _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From asalamon at elender.hu Tue Jul 31 16:55:35 2001 From: asalamon at elender.hu (Andras Salamon) Date: Tue, 31 Jul 2001 16:55:35 +0200 (CEST) Subject: [Mplayer-users] SDL -noxv problema In-Reply-To: <0107300016060G.15797@astral> Message-ID: On Mon, 30 Jul 2001, Felix Buenemann wrote: > On Sunday, 29. July 2001 11:40, you wrote: > > On Sun, 29 Jul 2001, Felix Buenemann wrote: > > > On Saturday, 28. July 2001 15:55, you wrote: > > > > Hi, > > > > > > > > I tried -vo sdl -noxv with several movies, and it works only for YUY2 > > > > (divx decoded by windows dll), and not for YV12 (mpeg files, divx > > > > decoded by ffdivx). Is it a known bug? I'm using SDL 1.2.0. > > > > > > No, I'll check it, what exact error do you get? > > > > The picture is black. No error messages. > > > hmm, which version of mplayer are you using? A few days old. I've upgraded SDL to 1.2.2, and installed nasm from source. Still no improvement. :( I've just noticed an interesting thing. If I press 'd', then the window will be doubles-size (that's not a big surprise), but the picture is ok. Prssing 'n' makes the window normal-size, and black. Sala > > > It works fine here with SDL 1.2.1 cvs and mplayer cvs, with both avi and > > > mpeg. > > > > Maybe I'll upgrade SDL. > > > > > > Sala > > > > _______________________________________________ > > Mplayer-users mailing list > > Mplayer-users at lists.sourceforge.net > > http://lists.sourceforge.net/lists/listinfo/mplayer-users > > _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From nexus at hoth.amu.edu.pl Tue Jul 31 18:56:09 2001 From: nexus at hoth.amu.edu.pl (Bohdan Horst) Date: Tue, 31 Jul 2001 18:56:09 +0200 Subject: [Mplayer-users] Divx4 Message-ID: <20010731185608.A79530@hoth.amu.edu.pl> Are there any plans to include latest OpenDivX codecs also as .dll/.ax ? (for non-Linux x86 systems) best regards -- / irl:Bohdan 'Nexus' Horst | mailto:nexus at irc.pl | irc:Nexus \ {---------------------------^----------v----------^------------} \ http://www.physd.amu.edu.pl/~nexus/ | Instytut Fizyki UAM / _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From R.Dubitzky at physik.tu-dresden.de Tue Jul 31 19:08:15 2001 From: R.Dubitzky at physik.tu-dresden.de (Rolf Dubitzky) Date: Tue, 31 Jul 2001 19:08:15 +0200 (MET DST) Subject: [Mplayer-users] bugs? In-Reply-To: <200107311313.PAA57744@thot.banki.hu> Message-ID: On Tue, 31 Jul 2001, Arpi wrote: > 2. some big files doesn't play with -idx / -forceidx > (cannot load dll / segfault) > is it solved? Sorry for not comming back to you right away, but actually I had deleted the movie that didn't play when I got a working version of it. I managed to get the broken one back and checked it. Well done :) It works for me. Cheers, Rolf *************************************************************** Rolf Dubitzky e-mail: Rolf.Dubitzky at Physik.TU-Dresden.de s-mail see http://hep.phy.tu-dresden.de/~dubitzky/ *************************************************************** _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Tue Jul 31 19:23:36 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Tue, 31 Jul 2001 19:23:36 +0200 (MET DST) Subject: [Mplayer-users] bugs? In-Reply-To: Message-ID: On Tue, 31 Jul 2001, Rolf Dubitzky wrote: > On Tue, 31 Jul 2001, Arpi wrote: > > > 2. some big files doesn't play with -idx / -forceidx > > (cannot load dll / segfault) > > is it solved? > > Sorry for not comming back to you right away, but actually I had deleted > the movie that didn't play when I got a working version of it. I managed > to get the broken one back and checked it. Well done :) It works for me. Cool! I'll try when my download is completed. Now, since my movie had a broken index and wasn't repaired by DivXFix either (crap of a program!), is it possible to save the created index somehow? Or attach it to the AVI (perhaps even replacing the old one?) That mplayer would not have to build it the next time again, because that's a rather slow process here... gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Email: gruel at gmx.de | Email: lampert at math.chalmers.se _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 31 20:28:33 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 31 Jul 2001 20:28:33 +0200 (CEST) Subject: [Mplayer-users] Re: Audio Problems - Buffer In-Reply-To: <20010731193658.A6522@sci.fi> Message-ID: <200107311828.UAA28930@thot.banki.hu> Hi, > On Tue, Jul 31, 2001 at 02:01:43PM +0200, Arpi wrote: > > > as i said before, it can be. but it takes long (must read and decode > > big part of file), and as 99% of files not using VBR, it doens't worth. > > Couldn't you just monitor the bit rate of audio frames and if it varies, > assume it's VBR and adjust to the situation on the fly? i can detect if it changes, but demuxer can't be changed on-the-fly. it must be decided before parsing the file. please leave this problem now. i'll rework avi demuxer later, and i'll try to solve this somehow. or, if you want, simply put ni=1 into config file. it will force the 'ni' parsing method, used by avifile and windows media player. btw it does slower i/o (2 independent file thread instead of one) but who cares :) and it uses less system memory than no-ni. maybe i'll change it to be default. > > > Media Player in Windows seems to be able to handle this kind of video. > > then use it > > No, thanks. I have something better :) :) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 31 20:35:51 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 31 Jul 2001 20:35:51 +0200 (CEST) Subject: [Mplayer-users] Audio Problems - Buffer In-Reply-To: <20010731164335.19042.qmail@web5202.mail.yahoo.com> Message-ID: <200107311835.UAA11782@thot.banki.hu> Hi, > > 4. RTFM > i RTFM. and you know - it doesn't help with answers > like: > -------- > Q: I got DEMUXER: Too many (328 in 83968129 bytes) > audio packets in the buffer ERROR > A: split your file to 8MB pieces > -------- :) it's pasted from the FUN page :) the 'real' doc says, in DOCS/BUGS: Audio delay/de-sync specific to one or a few files: - bad file (please upload the file, so we can check & fix) Workaround: -ni or -bps option (for non-interlaved or bad files) -mc 0 (required for files with VBR audio) -delay option or +/- keys at runtime to adjust delay so, RTFM again, this time not the FUN page, rather DOCS/* in mplayer. > i'm not the guy who asks before i read the docs/mans. maybe. > but if i still ask, means the man/docs didn't give me > the answers i was searching for. click to 'search again'. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 31 20:39:05 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 31 Jul 2001 20:39:05 +0200 (CEST) Subject: [Mplayer-users] Divx4 In-Reply-To: <20010731185608.A79530@hoth.amu.edu.pl> Message-ID: <200107311839.UAA36168@thot.banki.hu> Hi, > > Are there any plans to include latest OpenDivX codecs also as .dll/.ax ? > (for non-Linux x86 systems) no, it doesn't work with Eugene's win32 loader. i talked with him about this a week ago, but he couldn't help :( he said that divx4 will be available for all platforms as native lib, and do not use dll hack. so, all you with non-intel unixes, should bomb eugene with mails asking for support or beta-testing library on your system. A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 31 20:47:16 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 31 Jul 2001 20:47:16 +0200 (CEST) Subject: [Mplayer-users] bugs? In-Reply-To: Message-ID: <200107311847.UAA47800@thot.banki.hu> Hi, > > > 2. some big files doesn't play with -idx / -forceidx > > > (cannot load dll / segfault) > > > is it solved? > > > > Sorry for not comming back to you right away, but actually I had deleted > > the movie that didn't play when I got a working version of it. I managed > > to get the broken one back and checked it. Well done :) It works for me. > > Cool! I'll try when my download is completed. Now, since my movie had a > broken index and wasn't repaired by DivXFix either (crap of a program!), > is it possible to save the created index somehow? Or attach it to the > AVI (perhaps even replacing the old one?) That mplayer would not have to > build it the next time again, because that's a rather slow process here... yes, it's possible 2 way: 1. fixing the avi file itself (doing the same as divfix) -> isn't usefull if you check a file while downloading :( 2. saving index table to a new file (1-4 megz for an average 700mb avi) and adding a new mplayer option to load it (or automatically find filename+.idx ?) impelmentation: 1. is hard, i have to make proper avi header parser/rebuilder stuff. i'll do it later, for encoding, but now i have no time for it. 2. simple, just 10min hack to get it work with new switch. (autodetect stuff is a bit more) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 31 20:59:11 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 31 Jul 2001 20:59:11 +0200 (CEST) Subject: [Mplayer-users] a question about fast forward In-Reply-To: Message-ID: <200107311859.UAA29182@thot.banki.hu> Hi, > My name is Przemek, I'm from Poland. > I'm sorry for my poor English, I haven't used it for ages. > I have Red Hat Linux 7.0, kernel 2.2.19, gcc 2.95.3, ( and Duron 750 processor). > I got mplayer sources from CVS on 24th July. > I tried to play one avi/DivX movie. > I had problems with sound and I set ni = yes. > The mplayer worked well but when I tried move forward 10 minutes > it stopped for a minute. > On other files moving forward was ok, but for this one was very slow. > I tried to find the problem. > I found that all this time program spent in loop in > the demux_avi_fill_buffer_ni() function. > Here is some lines from index of this avi file: > 0: 01wb 10 00000004 7225 > 1: 00dc 10 00001C46 1162 > 2: 01wb 10 000020D8 8068 > 3: 00dc 0 00004064 117 > 4: 00dc 0 000040E2 117 > 5: 00dc 0 00004160 117 > the video stream is divided in very small packages, and every single package > was skipped in one call of the demux_avi_read_packet(). yes, it's a limitation of my avi seeking code. it was desigend for interleaved streams. it works with -ni streams too, but it skips the whole stream at seeking :( i planned to fix it when i wrote it, but i already forget :( i have to make different seeking code for ni streams. > I added one condition to the demux_avi_fill_buffer_ni() : > (...) > > if((skip_video_frames>0) && \ > > ds && (ds==demux->video) && \ > > (demux_avi_select_stream(demux,((AVIINDEXENTRY *)demux->idx)[idx_pos].ckid) --skip_video_frames; > > ret=0; > > } else { > if(demux->idx_size>0 && idx_posidx_size){ > (...) > } else return 0; > ret=demux_avi_read_packet(demux,id,len,idx_pos,flags); > > } > if(!ret && skip_video_frames<=0) > (...) > and moving forward works faster. When it skips package it doesn't call > the demux_avi_read_packet() function. > > In the begginning of the demux_avi_fill_buffer_ni() I saw code: > > if(ds==demux->video) idx_pos=demux->idx_pos_a++; else > if(ds==demux->audio) idx_pos=demux->idx_pos_v++; else > idx_pos=demux->idx_pos++; > > It looks like a bug, if there is the video stream it gets index of > package of audio stream and index of package of video stream for audio stream. right. silly bug :( thanks, i'll fix. btw it works, as this is the only place where idx_pos_a and idx_pos_v are used different way (currently). > I have a question of the main function in mplayer.c, it's demuxer.c > why in the code block beggining of 'switch(file_format)' and 'case DEMUXER_TYPE_AVI:' > is 'demuxer->idx_pos_v' set two times, second time to position of package > of audio stream ? do you mean this: ? demuxer->idx_pos=0; demuxer->idx_pos_a=0; demuxer->idx_pos_v=0; it's normal. i set every steram pointers to the beginning of the file. for interleaved files (99% of avi files) _a and _v variables aren't used. for non-interleaved (-ni) files they are set by the demuxer. for ni, i could calculate position from index table, it's right. but i'm lazy, and you can nitoce that many "HACK!!!" commenst in teh -ni code. it wasn't well-written, unfortunately. just hacked together to work. as it's used for only a few movies, i don't care. i'll rewrite that stuff later. but thanks for the note, i already forget that it's unfinished code. :( A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From gruel at gmx.de Tue Jul 31 21:16:50 2001 From: gruel at gmx.de (Christoph H. Lampert) Date: Tue, 31 Jul 2001 21:16:50 +0200 Subject: [Mplayer-users] bugs? In-Reply-To: <200107311847.UAA47800@thot.banki.hu> References: <200107311847.UAA47800@thot.banki.hu> Message-ID: <200107311916.f6VJGpG13835@alison.hemmet.chalmers.se> Am Dienstag, 31. Juli 2001 20:47 schrieben Sie: > > Cool! I'll try when my download is completed. Now, since my movie had a > > broken index and wasn't repaired by DivXFix either (crap of a program!), > > is it possible to save the created index somehow? Or attach it to the > > AVI (perhaps even replacing the old one?) That mplayer would not have to > > build it the next time again, because that's a rather slow process > > here... > > yes, it's possible 2 way: > 1. fixing the avi file itself (doing the same as divfix) > -> isn't usefull if you check a file while downloading :( No, it has to be (very) optional, of course. > 2. saving index table to a new file (1-4 megz for an average 700mb avi) > and adding a new mplayer option to load it (or automatically find > filename+.idx ?) Doesn't sound too bad. However, I still have a problem with the file: It plays for 3 or 4 minutes (after -idx skipping there is possible), then stops with message "file doesn't contain the selected audio or video stream" I know the file is broken, but: Is this repairable? gruel ----------------------- Start playing... [xv] dcx: 0 dcy: 0 dx: 0 dy: 0 dw: 800 dh: 577 [xv-fs] dcx: 0 dcy: 130 dx: 0 dy: 130 dw: 800 dh: 340 Initial PTS delay: -6.264 sec (calculated: 0.011) demux: file doesn't contain the selected audio or video stream 0% 0.0% 9065 Exiting... (End of file) -- Christoph Lampert, gruel at gmx.de "Linux is a cancer that attaches itself in an intellectual property sense to everything it touches. That's the way that the license works." - Steve Balmer "Epsilon < 0" - chl _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Tue Jul 31 21:28:42 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Tue, 31 Jul 2001 21:28:42 +0200 Subject: [Mplayer-users] Re: Audio Problems - Buffer In-Reply-To: <20010731193658.A6522@sci.fi> References: <20010731131301.A1931@sci.fi> <200107311201.OAA11914@thot.banki.hu> <20010731193658.A6522@sci.fi> Message-ID: <18948088207.20010731212842@gmx.de> Hello Anssi, Tuesday, July 31, 2001, 6:36:58 PM, you wrote: > On Tue, Jul 31, 2001 at 02:01:43PM +0200, Arpi wrote: >> as i said before, it can be. but it takes long (must read and decode >> big part of file), and as 99% of files not using VBR, it doens't worth. > Couldn't you just monitor the bit rate of audio frames and if it varies, > assume it's VBR and adjust to the situation on the fly? >> > Media Player in Windows seems to be able to handle this kind of video. >> then use it > No, thanks. I have something better :) Btw. DivX The Playa (also can't handle ac3 sound) and Virtual Dub also can't handle VBR MP3 =) (but. heavy virtual dub mod nandub can) -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Tue Jul 31 21:26:45 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Tue, 31 Jul 2001 21:26:45 +0200 Subject: [Mplayer-users] SDL -noxv problema In-Reply-To: References: Message-ID: <3347970808.20010731212645@gmx.de> Hello Andras, Tuesday, July 31, 2001, 6:33:02 PM, you wrote: > On Mon, 30 Jul 2001, Felix Buenemann wrote: >> Hello Andras, >> >> Sunday, July 29, 2001, 9:47:15 PM, you wrote: >> >> > On Sun, 29 Jul 2001, Arpi wrote: >> >> > Hi, >> >> >> Hi, >> >> >> >> > On Sun, 29 Jul 2001, Felix Buenemann wrote: >> >> > >> >> > > On Saturday, 28. July 2001 15:55, you wrote: >> >> > > > Hi, >> >> > > > >> >> > > > I tried -vo sdl -noxv with several movies, and it works only for YUY2 >> >> > > > (divx decoded by windows dll), and not for YV12 (mpeg files, divx decoded >> >> > > > by ffdivx). Is it a known bug? I'm using SDL 1.2.0. >> >> > > No, I'll check it, what exact error do you get? >> >> > > >> >> > >> >> > The picture is black. No error messages. >> >> > >> >> I think it's the gcc 2.96 problem then... >> >> (see DOCS/BUGS, black image with mpeg) >> >> >> hmm, maybe it's prob with alphamap stuff or direct memcpy stuff, >> please edit the codecs.conf for the codec you want to use and comment >> out line with bgr formats and put a new line with only a format that >> has other bpp then your XServer (eg. BGR15 when X runs at 24bpp) > Hi, > Mpeg2 has only one format YV12. I cannot change it to BGR15. can you check if you have same prop playing divx, too? > Sala >> > I've read DOCS/BUGS. But I have gcc 2.95.3. >> >> > Sala >> >> >> >> >> A'rpi / Astral & ESP-team >> >> -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 31 21:37:15 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 31 Jul 2001 21:37:15 +0200 (CEST) Subject: [Mplayer-users] bugs? In-Reply-To: <200107311916.f6VJGpG13835@alison.hemmet.chalmers.se> Message-ID: <200107311937.VAA38578@thot.banki.hu> Hi, > Doesn't sound too bad. However, I still have a problem with the file: It > plays for 3 or 4 minutes (after -idx skipping there is possible), then stops > with message "file doesn't contain the selected audio or video stream" > > I know the file is broken, but: Is this repairable? yes, everything is repairable. even a broken HDD driver with ntfs partition containing very important data -> but should be done manually -> lots' of money :) if you send me teh file & money, i'll hack it with hex editor and get it work :) ok. stop joking:) i don't know any program or method for automatically fix broken avi files. avi is the worst file format i've ever seen. it has zero error tolerance. for example, asf and mpeg-ts files are from constant-length blocks, so if a block is broken, you can skip it and read next (you know where is it). for mpeg, there are sync codes (0x0 0x0 0x1), so it's easy to resync. same for mpeg audio, but sync code is something like f3ffxxxx, i duno now, but you can check in mp3lib/sr1.c resync method. for avi, you have nothing. it has variable sized chunks, each chunks contains its length. if a chunk is broken, you don't know where is the next and you don't know is it broken or not...) i can imagine a brute-force method (but should be impemenetd in a standalone util prog, not in mplayer): if teh parser thinks that chunk is broken (too large chunksize, or invalid chunk id), it can recursive call itself (parser), and try to find next chunk probing each byte position after the buggy chunk. if it's ok, try to check next chunk if still ok, then we can skip broken chunk. it isn't 100% perfect, and can fail for good chunks and pass broken chunks, but may help in most cases (or not, didn't try). i personally hate the avi file format, and really hope thay people will change to something more usefull (mpeg/asf/quicktime). and i forget to saym but you already noticed: A-V sync in avi files is terrible.. there is only one standard way (in avi file format specification) but nobody uses it (i have only oen file using this, it's about 5 years old, using CRAM codec...). it specifies that audio-video chunk pairs should be defined in a LIST item. currently there are 3 formats, none of them is standard. 1. interleaved streams: same as standard, but they left out LIST chunks, only list A and V and A and V etc after eachother. 2. bps method: audio and video streams are totally independent (usually -ni streams), but audio timestamp can be calculated by dividing audio byte position by a 'average bytes per second' value specified in audio stream format header. it can't handle VBR audio. 3. combination of 1. and 2. i just got such file, it's Lola Rennt german dvdrip version (thanx Atmos :)). it plays with mplayer using method 1., but you can't seek (lost A-V sync if seeking). i'ev found that avifile handle this file, because it uses combination of 1. and 2. methods (at least fersh avifile 9.6 cvs). i'll implement this and try, mayeb help for some special streams. btw there are some streams (about 5% of all) which works with mpalyer's method 1., but fails with avifile's mixed method 3. windows media player uses something between 1. and 3., couldn't find yet how it works. old avifile and mplayer -bps uses method 2. i really don't know, what are standards made for? but i'm sure, m$ doesn't know too. sorry for being offtopic, this should go to mplayer-dev-eng. > "Epsilon < 0" - chl is it standard? =) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Tue Jul 31 21:36:02 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Tue, 31 Jul 2001 21:36:02 +0200 Subject: [Mplayer-users] bugs? In-Reply-To: References: Message-ID: <15648527699.20010731213602@gmx.de> Hello Christoph, Tuesday, July 31, 2001, 7:23:36 PM, you wrote: > On Tue, 31 Jul 2001, Rolf Dubitzky wrote: >> On Tue, 31 Jul 2001, Arpi wrote: >> >> > 2. some big files doesn't play with -idx / -forceidx >> > (cannot load dll / segfault) >> > is it solved? >> >> Sorry for not comming back to you right away, but actually I had deleted >> the movie that didn't play when I got a working version of it. I managed >> to get the broken one back and checked it. Well done :) It works for me. > Cool! I'll try when my download is completed. Now, since my movie had a > broken index and wasn't repaired by DivXFix either (crap of a program!), > is it possible to save the created index somehow? Or attach it to the > AVI (perhaps even replacing the old one?) That mplayer would not have to > build it the next time again, because that's a rather slow process here... or at least if not doing so save as same filename with ending .idx and autocheck for such file on playback. > gruel -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Tue Jul 31 21:33:45 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Tue, 31 Jul 2001 21:33:45 +0200 Subject: [Mplayer-users] Audio Problems - Buffer In-Reply-To: <20010731164335.19042.qmail@web5202.mail.yahoo.com> References: <20010731164335.19042.qmail@web5202.mail.yahoo.com> Message-ID: <2048390742.20010731213345@gmx.de> Hello Max, Tuesday, July 31, 2001, 6:43:35 PM, you wrote: > On Tue, 31 Jul 2001 01:05:59 +0200 (CEST) Arpi > wrote: >> Hi, >> >> > Detected AVI file format! >> >> > A: 141.3 ( 140.4) V: 43.5 A-V: 96.926 ct: > 4.346 >> > 1044 24% 12% 3.8% 0 >> >> 1. try with switch -ni > i did. now the movie plays in normal speed, with > audio, but the A/V is still going out of synch (and > i'm not able to fix that with the +/-keys). i gonna > play around with the -mc option, maybe that will help. >> 2. is your system fast enough (including vga & bus) > ? >> check _idle_ cpu usage with top when playing this > it seems. the idle time jumps between 20% and 50% > during i play the movie. >> 3. all files are bad, or only this one? > 1st i had this problems only from encodes of a guy on > IRC. i was not worried about it. but then i got > another encode with the same problem. so i thought > maybe someone else found a workaround (or if there is > none, i report this "error"). >> 4. RTFM > i RTFM. and you know - it doesn't help with answers > like: > -------- > Q: I got DEMUXER: Too many (328 in 83968129 bytes) > audio packets in the buffer ERROR > A: split your file to 8MB pieces > -------- IMHO that's the answer from the unofficial Fun-FAQ we did on IRC =) Audio Sync related probs are described in DOCS/BUGS > i'm not the guy who asks before i read the docs/mans. > but if i still ask, means the man/docs didn't give me > the answers i was searching for. > mfg Rach -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 31 21:53:54 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 31 Jul 2001 21:53:54 +0200 (CEST) Subject: [Mplayer-users] Audio Problems - Buffer In-Reply-To: <2048390742.20010731213345@gmx.de> Message-ID: <200107311953.VAA47784@thot.banki.hu> Hi, > >> 4. RTFM > > i RTFM. and you know - it doesn't help with answers > > like: > > -------- > > Q: I got DEMUXER: Too many (328 in 83968129 bytes) > > audio packets in the buffer ERROR > > A: split your file to 8MB pieces > > -------- > IMHO that's the answer from the unofficial Fun-FAQ we did on IRC =) Yes. and my favourite Q/A from that Fun-FAQ very true now: Q: I'm stuck with mplayer! A: you're not alone. :) and the question from tipical user: Q: mplayer crashing with every files. i've attached output of ls -la A: we need also output of cat /etc/shadow A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From lampert at math.chalmers.se Tue Jul 31 22:53:27 2001 From: lampert at math.chalmers.se (Christoph Lampert) Date: Tue, 31 Jul 2001 22:53:27 +0200 (MET DST) Subject: [Mplayer-users] mplayer, radeon and DVD quality In-Reply-To: Message-ID: Hi Nick, On Wed, 1 Aug 2001, Nick Kurshev wrote: > > I already wrote about DVD picture quality on radeon_ve under mplayer. > I've found description of problem which is similar to described by me: > http://www.ati.com/na/pages/resource_centre/dev_rel/atirdv.pdf > It's described on pages 13-15. > In short: under windows I have the best quality from represented > on page 14, but under Linux I have the worst from those. I'm not sure - > is it problem of codec or is it problem of mplayer? or X11 drivers? > (Indeed pictures have quality much better than in the document, but > roughly problem looks like that). If I read the pdf correctly, than it's a X11-drivers problem. Or rather a missing feature. ATI Radeon VE has a clever de-interlace filter implemented (switchable, I guess), and the XFree driver does not support it (yet), but the Windows Driver by ATI themselves does. So the problem should disappear for non-interlaced material. Did you check on that? If it's really the de-interlace thing, I would not count on this being implemented soon. Of course, there could be a software de-interlace filter for DVD instead, e.g. in mplayer. That could give better results without waiting for better drivers. gruel -- Dipl. math. Christoph Lampert (complex analysis, integral formulae) Gibraltargatan 86 | CTH, Matematiskt centrum rum 637 | Eklandagatan 86, rum 2235 41279 Gothenburg | 41296 Gothenburg SWEDEN | SWEDEN Email: gruel at gmx.de | Email: lampert at math.chalmers.se | Tel. +46 31 772 5323 (office) _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From atmosfear at users.sourceforge.net Tue Jul 31 22:48:55 2001 From: atmosfear at users.sourceforge.net (Felix Buenemann) Date: Tue, 31 Jul 2001 22:48:55 +0200 Subject: [Mplayer-users] Real Benchmarking In-Reply-To: References: Message-ID: <18452900967.20010731224855@gmx.de> Hello Christoph, Monday, July 30, 2001, 11:18:14 PM, you wrote: > Hi Felix, >> 6. Low quality DivX ;-) (like converted from mpeg, or broadband >> streaming video) >> Video: 352x144 low motion divx, 450kbps, crispness 75, variable >> keyframe delay >> Audio: 16Bit, 32kHz divx audio (wma), 64kbps, normalized >> Filesize: 11.7MB >> >> Anything missing here I should also encode? (maybe indeo5) > Sounds nice... I'd rather prefer a TV-like resolution for low-res, e.g. > 320x240 or 352x288. But I guess that does not really matter. yes, I'll do 320x240 with black bands when I find some time. > Don't put the files in CVS ;-) they are on MPHQ /MPlayer/incoming/benchmark_testsuite/ (btw. besides encoding all clips are the same, maybe differing one frame or so ;) > And maybe #1 is too large, after all it's just for benchmarking, not > for creating as much traffic as possible... > gruel -- Best regards, Felix mailto:atmosfear at users.sourceforge.net _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 31 23:16:18 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 31 Jul 2001 23:16:18 +0200 (CEST) Subject: [Mplayer-users] mplayer, radeon and DVD quality In-Reply-To: Message-ID: <200107312116.XAA65688@thot.banki.hu> Hi, > I already wrote about DVD picture quality on radeon_ve under mplayer. > I've found description of problem which is similar to described by me: > http://www.ati.com/na/pages/resource_centre/dev_rel/atirdv.pdf > It's described on pages 13-15. Ehh. Why didn't you say that you mean de-interlacing??? This topic was discussed earlier. > In short: under windows I have the best quality from represented > on page 14, but under Linux I have the worst from those. I'm not sure - > is it problem of codec or is it problem of mplayer? or X11 drivers? > (Indeed pictures have quality much better than in the document, but > roughly problem looks like that). > > Does someone have any solutions? Not for you. 2 solution exists: 1. software 2. hardware :) 1.: yes, someone could write a software deinterlacer it's lots of calculation if you want same/better quality as radeon's 2.: most card support it, but current Xv API doesn't have interface for interlaced images. (AFAIK) there is syncfb driver, it has hardware deinterlacing support, but it's matrox g4x0-only. and it's obsoleted, but i'll port this feature to up-to-date mga_vid.o unfortunately, you must wait, or worse: use windows :) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 31 23:25:07 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 31 Jul 2001 23:25:07 +0200 (CEST) Subject: [Mplayer-users] mplayer, radeon and DVD quality In-Reply-To: Message-ID: <200107312125.XAA53316@thot.banki.hu> Hi, > If I read the pdf correctly, than it's a X11-drivers problem. Or rather a yes > missing feature. ATI Radeon VE has a clever de-interlace filter > implemented (switchable, I guess), and the XFree driver does not support > it (yet), but the Windows Driver by ATI themselves does. > So the problem should disappear for non-interlaced material. Did you check > on that? If it's really the de-interlace thing, I would not count on this > being implemented soon. and i think, it's working only if you are using hardware motion compensation (card must know directrtion & speed of blocks for this 'intelligent' filter) which needs special mpeg codecs. btw there are plans for XvMC for XFree, but they are only plans, and i think it tooks some years to get accepted and implemented for these cards. but, as ATI is big supporter/sponsor of DRI development (the biggest, as 3dfx dead and matrox stopped dri support) so i think ati cards will be the first with XvMC support. if it's ready and working, then someone should write a fast mpeg1/2/4? decoder supporting XvMC. it isn't so trivial and simple :( > Of course, there could be a software de-interlace filter for DVD instead, > e.g. in mplayer. That could give better results without waiting for better > drivers. yes. but, afaik software deinterlacers are extreeeeemly sloooooow. (yea, i know that Nick will over-optimize them to get 100fps on 386 :)) A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From arpi at thot.banki.hu Tue Jul 31 23:45:07 2001 From: arpi at thot.banki.hu (Arpi) Date: Tue, 31 Jul 2001 23:45:07 +0200 (CEST) Subject: [Mplayer-users] new benchmarks Message-ID: <200107312145.XAA29072@thot.banki.hu> Hi, I did it again :) Changes: - divx4 results was wrong in my prev tests. i measured it with I420 output, using new API. now doing 2 tests, YV12 with opendivx API, and YUY2 with new API. (new API does one more memory copy) - ffmpeg changes: FFmpeg-mp - libavcodec from MPlayer CVS (old) FFmpeg-ffy - libavcodec from ffmpeg CVS, yesterday (with fixed cputest.c) FFmpeg-ff - libavcodec from ffmpeg CVS, today (Gerard did lots of changes) Note that last night ffmpeg changes made small slowdown for me :(((( Coyote*.avi & huge_bands.avi has big thin black bands above & under the image. others are 'full-screen' movies. all file are downloadable ftom ftp.mplayerhq.hu, if you want to check/try them. test system is still the same: celeron-2 600 @ 900 (100MHz FSB, PC133 2/2/2 ram) File: /3d/divx/sample.light.it.up.avi VIDEO: [DIV3] 640x352 24bpp 23.98 fps 823.5 kbps (100.5 kbyte/s) DShow DLL : 14.540s 14.401s 14.316s 14.421s VfW DLL : 13.700s 13.680s 13.707s 13.664s DivX4-YV12 : 8.895s 8.835s 8.791s 8.872s DivX4-YUY2 : 11.802s 11.522s 11.609s 11.539s FFmpeg-mp : 12.585s 12.620s 12.574s 12.592s FFmpeg-ffy : 12.787s 12.775s 12.765s 12.782s FFmpeg-ff : 12.817s 12.807s 12.868s 12.801s File: /3d/divx/405divx_sm_v2[1].avi VIDEO: [DIV3] 356x240 24bpp 30.00 fps 343.0 kbps (41.9 kbyte/s) DShow DLL : 16.829s 16.949s 16.754s 16.811s VfW DLL : 29.761s 29.765s 30.102s 29.675s DivX4-YV12 : 8.895s 8.891s 8.875s 8.858s DivX4-YUY2 : 11.592s 11.485s 11.623s 11.454s FFmpeg-mp : 13.684s 13.668s 13.599s 13.649s FFmpeg-ffy : 12.728s 12.771s 12.754s 12.786s FFmpeg-ff : 12.798s 12.760s 12.820s 12.745s File: /3d/divx/MI2-Trailer.avi VIDEO: [DIV3] 480x204 24bpp 24.00 fps 604.8 kbps (73.8 kbyte/s) DShow DLL : 14.661s 14.746s 14.640s 14.732s VfW DLL : 14.507s 14.587s 14.573s 14.434s DivX4-YV12 : 8.561s 8.480s 8.519s 8.534s DivX4-YUY2 : 10.403s 10.398s 10.353s 10.386s FFmpeg-mp : 11.604s 11.621s 11.610s 11.636s FFmpeg-ffy : 11.447s 11.498s 11.450s 11.498s FFmpeg-ff : 11.441s 11.460s 11.464s 11.414s File: /3d/divx/Coyote.Ugly.Sample-highbitrate-atmos.avi VIDEO: [DIV3] 640x480 24bpp 25.00 fps 1867.1 kbps (227.9 kbyte/s) DShow DLL : 19.184s 19.281s 19.230s 19.401s VfW DLL : 18.712s 18.673s 18.737s 18.668s DivX4-YV12 : 12.377s 12.386s 12.395s 12.362s DivX4-YUY2 : 15.292s 15.237s 15.282s 15.235s FFmpeg-mp : 20.990s 21.024s 20.939s 21.049s FFmpeg-ffy : 18.869s 18.853s 18.929s 18.883s FFmpeg-ff : 19.024s 18.930s 18.901s 18.912s File: /3b/huge_bands.avi VIDEO: [DIV3] 640x512 24bpp 29.97 fps 924.8 kbps (112.9 kbyte/s) DShow DLL : 15.142s 15.106s 15.099s 15.090s VfW DLL : 14.642s 14.629s 14.639s 14.693s DivX4-YV12 : 8.268s 8.275s 8.272s 8.302s DivX4-YUY2 : 10.615s 10.635s 10.627s 10.629s FFmpeg-mp : 20.834s 20.797s 20.791s 20.762s FFmpeg-ffy : 15.849s 15.855s 15.820s 15.825s FFmpeg-ff : 15.641s 15.671s 15.671s 15.684s File: /3b/hannibal.avi VIDEO: [DIV3] 480x260 24bpp 24.00 fps 153.8 kbps (18.8 kbyte/s) DShow DLL : 11.720s 11.771s 11.696s 11.720s VfW DLL : 20.017s 20.111s 20.088s 20.104s DivX4-YV12 : 6.077s 6.031s 6.022s 6.041s DivX4-YUY2 : 7.414s 7.403s 7.401s 7.411s FFmpeg-mp : 10.736s 10.805s 10.725s 10.713s FFmpeg-ffy : 9.424s 9.441s 9.430s 9.431s FFmpeg-ff : 9.563s 9.532s 9.557s 9.511s A'rpi / Astral & ESP-team -- mailto:arpi at thot.banki.hu http://esp-team.scene.hu _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users From sergiuh at xnet.ro Tue Jul 31 21:57:41 2001 From: sergiuh at xnet.ro (mmmm) Date: Tue, 31 Jul 2001 22:57:41 +0300 Subject: [Mplayer-users] Where i found font.desc ?? References: <20010731121648.A26107@bail.ddts.net> Message-ID: <3B670DB5.77811396@xnet.ro> > Hi, Mi name it's Mihai. Where I found font.desc ?? Thank You _______________________________________________ Mplayer-users mailing list Mplayer-users at lists.sourceforge.net http://lists.sourceforge.net/lists/listinfo/mplayer-users