From attila at kinali.ch Mon Feb 20 11:19:54 2012 From: attila at kinali.ch (Attila Kinali) Date: Mon, 20 Feb 2012 11:19:54 +0100 Subject: [MPlayer-matrox] [PATCH] mga_vid scaler limits G450 In-Reply-To: <4EEB793F.6000303@gmx.net> References: <4EEB793F.6000303@gmx.net> Message-ID: <20120220111954.8f081c5930c1c00f71c57d88@kinali.ch> On Fri, 16 Dec 2011 18:00:47 +0100 Dieter Werner wrote: > As according to the commentary it should also work with the G450 I > modified the source so that it also works for my G450 - which is > recognised as G400. It should still work with a G550 and not work with a > G200, as before. With a real G400 it will also allow the setting - I do > not know which effect this can have on the card. I also did not want to > dive deeper in to properly distinguish between G400 and G450. I don't know whether the G400 has the same problem or not. It could be. At the time when i wrote that check, i could only test it with a G550 and had no way to check how the G450/G400 behaved. If this works fine for you, then it's ok. As for the G400/G450 check, mga_vid does not distinguish between the two and i don't know from the top of my head whether there is an easy check for this. But those two are not that different as far as i know. So this should be ok. Reimar: could you commit that patch to the mga_vid repo? Thanks. Attila Kinali -- The trouble with you, Shev, is you don't say anything until you've saved up a whole truckload of damned heavy brick arguments and then you dump them all out and never look at the bleeding body mangled beneath the heap -- Tirin, The Dispossessed, U. Le Guin