[Mplayer-felhasznalok] TV out

[Kalman Mariak (sirkalmi)]

>
>
>hat...
>imho az illeto azt kerdezte, hogy a virtual desktop miert nem meretezodik
>at, amikor ctrl alt +- al felbontast valt...
>es azert, mert csak, tudtommal nincs ra fix. design issue...
>amugymeg mplayer -vm az o baratja, mienk meg a torusz.
>
Ezzel probalkoztam eddig:

mplayer -vo sdl -vm -x 800 -y 600 blablabla

kimenete:

MPlayer 0.90pre5-2.95.3 (C) 2000-2002 Arpad Gereoffy (see DOCS!)

CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Family: 6, 
Stepping: 6)
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 SSE

Reading /home/sirkalmi/.mplayer/codecs.conf: can't open 
'/home/sirkalmi/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/share/mplayer/codecs.conf: 34 audio & 94 video codecs
Font /home/sirkalmi/.mplayer/font/font.desc loaded successfully! (206 chars)
Using Linux's hardware RTC timing (1024Hz)
Can't open input config file /home/sirkalmi/.mplayer/input.conf : No 
such file or directory
Falling back on default (hardcoded) input config

Playing /cdrecorder/Gyilkosok_gyilkosa/Gyilkosok gyilkosa cd_01.avi
Cache fill:  2.25% (188416 bytes)    Detected AVI file format!
VIDEO:  [DIV3]  352x288  24bpp  25.00 fps  576.5 kbps (70.4 kbyte/s)
Detected audio codec: [mp3] afm:1 (MPEG layer-2, layer-3)
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 22050 Hz, 2 ch, sfmt: 0x10 (2 bps), ratio: 4000->88200 (32.0 kbit)
==========================================================================
Trying to force video codec driver family 5 ...
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec: CPU flags: mmx mmxext sse
Detected video codec: [ffdivx] vfm:5 (FFmpeg DivX ;-) (MS MPEG-4 v3))
==========================================================================
AO: [sdl] 22050Hz 2ch Signed 16-bit (Little-Endian)
SDL: Samplerate: 22050Hz Channels: Stereo Format Signed 16-bit 
(Little-Endian)
Start playing...
VDec: vo config request - 352 x 288 (preferred csp: Planar YV12)
VO: [sdl] 352x288 => 800x600 Planar YV12  [fs] [vm]
SDL: Using driver: x11
SDL: Info - please use -vm or -zoom to switch to best resolution.
A:   2.6 V:   2.6 A-V:  0.007 ct:  0.112   67/ 67  18% 79%  0.8% 12 0 97%
Exiting... (Quit)

tunetek:
Kudarc, a desktop meret valltozatlan ezert a kep jobb ill also szele 
kilog. (monitoron es tv-n is egyarant)

mplayer -vo sdl:dga (vagy siman dga ua.) -vm -x 800 -y 600
kimenete:
MPlayer 0.90pre5-2.95.3 (C) 2000-2002 Arpad Gereoffy (see DOCS!)

CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Family: 6, 
Stepping: 6)
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 SSE

Reading /home/sirkalmi/.mplayer/codecs.conf: can't open 
'/home/sirkalmi/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/share/mplayer/codecs.conf: 34 audio & 94 video codecs
Font /home/sirkalmi/.mplayer/font/font.desc loaded successfully! (206 chars)
Using Linux's hardware RTC timing (1024Hz)
Can't open input config file /home/sirkalmi/.mplayer/input.conf : No 
such file or directory
Falling back on default (hardcoded) input config

Playing /cdrecorder/Gyilkosok_gyilkosa/Gyilkosok gyilkosa cd_01.avi
Cache fill:  0.88% (73728 bytes)    Detected AVI file format!
VIDEO:  [DIV3]  352x288  24bpp  25.00 fps  576.5 kbps (70.4 kbyte/s)
Detected audio codec: [mp3] afm:1 (MPEG layer-2, layer-3)
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 22050 Hz, 2 ch, sfmt: 0x10 (2 bps), ratio: 4000->88200 (32.0 kbit)
==========================================================================
Trying to force video codec driver family 5 ...
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec: CPU flags: mmx mmxext sse
Detected video codec: [ffdivx] vfm:5 (FFmpeg DivX ;-) (MS MPEG-4 v3))
==========================================================================
AO: [sdl] 22050Hz 2ch Signed 16-bit (Little-Endian)
SDL: Samplerate: 22050Hz Channels: Stereo Format Signed 16-bit 
(Little-Endian)
Start playing...
VDec: vo config request - 352 x 288 (preferred csp: Planar YV12)
VO: [sdl] 352x288 => 800x600 Planar YV12  [fs] [vm]
SDL: Using driver: dga
SDL: Info - please use -vm or -zoom to switch to best resolution.
A: 596.2 V: 596.0 A-V:  0.172 ct:  0.017  14901/14901   0%  0%  0.0% 0 0 
0%8%
Exiting... (Quit)

tunetek:
A teven vizszintes szines csikok futnak (kozben a monitoron megy szepen).
Kilepes utan a monitor 1024x768-as felbontasban szepen mukodik (ez 
erdekes mert a film elinditasakor 800x600 -ban van mert feveszi a tv 
felbontasat a monitor is), de a tv-n valtozatlanul futnak a szines csikok.

Na tehat, hogy ertheto legyek mikor inditom a filmet akkor a monitor mar 
800x600-ban van mert a tv-vel szinkronban van es kilog a desktop jobb 
ill also szele. Az sdl + vm valltozatlanul hadja, a dga megoldja a 
problemat a monitoron, de ami a lenyeg a tv-n szar.

Kerdezem a lista nvidias tagjait, hogy oldjak meg ezt a problemat? Nem 
hiszem, hogy en hasznalok egyedul nvidia tv-outot.

Veres Imrenek koszonom a reszletes leirasat, de ezeken mar reg atragtam 
magamat.




mas:
Nem ide tartozik csak eszembe jutott:
Alex, hogy allsz a mp3pro tamogatassal? Nemreg szo volt rola a listan, 
hogy megproszbalod a winamp-os plugint mplayer-alatt beizzitani.