[MPlayer-dvb] mplayer fails to tune channel

[Tarcisio Fedrizzi]

Hi,
yes I'm sure beacuse the file has been produced with w_scan in order to
search
the transponder and scan in order to search the channels. Moreover in the
tests
with tzap I've used the same channel.conf.

Hi,
Tarcisio.


On Mon, Aug 31, 2009 at 5:56 PM, Nico Sabbi <nicola.sabbi at poste.it> wrote:

> Il lunedì 31 agosto 2009 17:51:37 Tarcisio Fedrizzi ha scritto:
> > Hi all,
> > I'm using mplayer in a freevo based work project, but I have a
> > problem. Mplayer works flawlessy for all medias except for DVB-T.
> > The card can correctly visualize channels and using other programs
> > such as kaffeine or tzap.
> > Mplayer instead is not able to tune the signal (I've even tried
> > with kubuntu 8.10
> > and the alpha of the 9.10 but with the same results).
> > The TV card I have is "ASUSTeK P7131 Hybrid" the chipset on which
> > is based is the saaa7134 and the dvb tuner chip is the "Philips
> > TDA10046H DVB-T". I'm using kubuntu 9.04 with kernel 2.6.28.
> > Mplayer version is 1.0rc2-4.3.3.
> > I attach my channels.conf and the normal mplayer verbose log plus
> > the strace log.
> > I thank anyone that will help me to track down the problem because
> > I need to use mplayer for this work.
> >
> > Thank you!
> > Best regards,
> > Tarcisio Fedrizzi.
> >
> > P.S. Please don't hesitate to ask me whatever information you need
> > to better understand the problem.
>
> are you sure the frequency is 690 and not 698?
> post the relevant lines in ~/.tzap/channels.conf
>
> _______________________________________________
> MPlayer-dvb mailing list
> MPlayer-dvb at mplayerhq.hu
> https://lists.mplayerhq.hu/mailman/listinfo/mplayer-dvb
>