[MPlayer-dvb] dvbstream -f ... -udp -net ... with mplayer udp://... does not work

[Roman Polach]

Hi, I just tried watching stream through dvbstream(cvs) -udp and mplayer(1.0_rc1),
but it does not work for me:

according to my .mplayer/channels.conf (which is OK for mplayer dvb://) line
CT1:506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:257:273:1

I tried to run
$ dvbstream -f 506000000 -udp -net 127.0.0.1:5001 1
in one terminal and
$ mplayer -nocache -noidx udp://127.0.0.1:5001
in another one, but I got no a/v from mplayer.
I got this output:


$ dvbstream -f 506000000 -udp -net 127.0.0.1:5001 1
dvbstream v0.6 - (C) Dave Chapman 2001-2004
Released under the GPL.
Latest version available from http://www.linuxstb.org/
Tuning to 506000000 Hz
Using DVB card "Zarlink MT352 DVB-T", freq=506000000
tuning DVB-T (in United Kingdom) to 506000000 Hz, Bandwidth: 8
Getting frontend status
Bit error rate: 0
Signal strength: 61999
SNR: 54484
UNC: 0
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC

MAP 0, addr 127.0.0.1:5001 From -1 secs, To -1 secs, 1 PIDs -  1
dvbstream will stop after -1 seconds (71582788 minutes)
Streaming 1 stream



$ mplayer -nocache -noidx udp://127.0.0.1:5001
MPlayer 1.0rc1-4.1.1 (C) 2000-2006 MPlayer Team
CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (Family: 15, Model: 1, Stepping: 2)
MMX2 supported but disabled
CPUflags:  MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX SSE SSE2
[MENU] Can't open menu config file: /home/roman/.mplayer/menu.conf
Menu inited: /usr/share/mplayer/menu.conf

Playing udp://127.0.0.1:5001.
STREAM_UDP, URL: udp://127.0.0.1:5001
Stream not seekable!
Stream not seekable!

---------------------------------------
www.transmission.cz - taneční party Transmission se koná 25. listopadu v pražské T-Mobile Aréně.