[MPlayer-dvb] dvb with Pinnacle PCTV Sat

[Nico Sabbi]

Lukas Kasprowicz wrote:

>Am Freitag, 4. März 2005 16:53 schrieb Nico Sabbi:
>  
>
>>and
>>
>>cat ~/.szap/channels.conf.sat  |grep ZDF
>>
>>?
>>
>>
>>but is szap is working (what version do you have ? 1.1.0 or some cvs
>>checkout) ?
>>mplayer must too!
>>unfrtunately it's not :(
>>
>>    
>>
>hmm very interesting....
>(Found out, that linuxtv's scan scanned 2x ZDF. deleted one, so it's the same 
>in both channel.conf)
>
>commands pasted in chonological order.
>
>
>marina ~ # cat ~/.szap/channels.conf |grep ZDF:
>ZDF:11954:h:0:27500:110:120:1:28006
>
>marina ~ # cat ~/.mplayer/channels.conf.sat |grep ZDF:
>ZDF:11954:h:0:27500:110:120:1:28006
>
>marina ~ # szap -r "ZDF"
>reading channels from file '/root/.szap/channels.conf'
>zapping to 85 'ZDF':
>sat 0, frequency = 11954 MHz H, symbolrate 27500000, vpid = 0x006e, apid = 
>0x0078
>using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>FE_DISEQC_SEND_BURST failed: Operation not supported
>status 04 | signal 8c8c | snr 0000 | ber 00000202 | unc 0000f7ae |
>status 1f | signal 8b8b | snr 544f | ber 00000217 | unc 00000000 | FE_HAS_LOCK
>
>marina ~ # /usr/local/bin/mplayer dvb://ZDF
>MPlayer dev-CVS-050303-05:00-3.4.3-20050110 (C) 2000-2005 MPlayer Team
>CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred (Family: 6, Stepping: 1)
>Detected cache-line size is 64 bytes
>CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
>Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE
>
>
>Playing dvb://ZDF.
>code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001
>Released under the GPL.
>Latest version available from http://www.linuxstb.org/
>dvb_tune Freq: 11954000
>Win32 LoadLibrary failed to load: 
>avisynth.dll, /usr/lib/win32/avisynth.dll, /usr/local/lib/win32/avisynth.dll
>TS file format detected.
>DEMUX OPEN, AUDIO_ID: -1, VIDEO_ID: -1, SUBTITLE_ID: -1,
>PROBING UP TO 2000000, PROG: 0
>VIDEO MPEG2(pid=110)...AUDIO MPA(pid=120) NO SUBS (yet)!  PROGRAM N. 0
>Opened TS demuxer, audio: 50(pid 120), video: 10000002(pid 110)...POS=40232
>VIDEO:  MPEG2  720x576  (aspect 2)  25.000 fps  15000.0 kbps (1875.0 kbyte/s)
>==========================================================================
>Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
>AUDIO: 48000 Hz, 2 ch, s16le, 256.0 kbit/16.67% (ratio: 32000->192000)
>Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
>==========================================================================
>vo: X11 running at 800x600 with depth 24 and 32 bpp (":0" => local display)
>==========================================================================
>.
>.
>.
>
>
>_This one working_ ... BUT when I do following after it worked
>
>
>
>marina ~ # szap -r "ProSieben"
>reading channels from file '/root/.szap/channels.conf'
>zapping to 25 'ProSieben':
>sat 0, frequency = 12480 MHz V, symbolrate 27500000, vpid = 0x00ff, apid = 
>0x0100
>using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>FE_DISEQC_SEND_BURST failed: Operation not supported
>status 04 | signal 8f8f | snr 0000 | ber 0000021a | unc 0000f822 |
>status 1f | signal 8e8e | snr 4969 | ber 00000002 | unc 00000000 | FE_HAS_LOCK
>
>  
>

if you do it in less than 10 seconds the frontend will stay tuned

>marina ~ # /usr/local/bin/mplayer dvb://ZDF
>MPlayer dev-CVS-050303-05:00-3.4.3-20050110 (C) 2000-2005 MPlayer Team
>CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred (Family: 6, Stepping: 1)
>Detected cache-line size is 64 bytes
>CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
>Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE
>
>
>Playing dvb://ZDF.
>code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001
>Released under the GPL.
>Latest version available from http://www.linuxstb.org/
>dvb_tune Freq: 11954000
>Not able to lock to the signal on the given frequency
>dvb_tune, TUNING FAILED
>ERROR, COULDN'T SET CHANNEL  106: Failed to open dvb://ZDF
>
>
>Exiting... (End of file)
>
>
>
>Very curios..
>
>
>Lukas
>
>  
>

what version of szap are you using?