[MPlayer-dvb] dvb with Pinnacle PCTV Sat

[Lukas Kasprowicz]

Am Donnerstag, 3. März 2005 23:46 schrieb Nico Sabbi:
> this reminds that recent versions of the drivers for Twinhan cards (of
> which
> your card is a specimen) have this bug, that isn't fixed yet.
> Until the bug is fixed you can disable the checks for FE_DISEQC_xxx
> ioctl()s in libmpdemux/dvb_tune.c
> (in diseqc_send_msg() don't return -1 and disable the checks on the
> result of
> the ioctl()s, just let them go on until the end).
>
>     Nico

Ok nothing more about diseqc with cvs snapshot and disabled checks for 
FE_DISEQC_xxx

But tuning failed. verbose returns "Not able to lock to the signal on the 
given frequency"

OPEN_DVB: prog=ZDF, card=1, type=1, vid=0, aid=0
code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001
Released under the GPL.
Latest version available from http://www.linuxstb.org/
PROG: ZDF, CARD: 1, VID: 0, AID: 0, TYPE: , FILE: (null)
PROGRAM NUMBER 106: name=ZDF, freq=11953000
DVB_OPEN_DEVICES(3)
OPEN(0), file /dev/dvb/adapter0/demux0: FD=5, CNT=0
OPEN(1), file /dev/dvb/adapter0/demux0: FD=6, CNT=1
OPEN(2), file /dev/dvb/adapter0/demux0: FD=7, CNT=2
DVB_SET_CHANNEL: new channel name=ZDF, card: 0, channel 106
DIFFERENT TUNING THAN THE PREVIOUS:   -> 0|011953000|027500000|0|H
dvb_tune Freq: 11953000
TUNE_IT, fd_frontend 4, fd_sec 0
freq 11953000, srate 27500000, pol H, tone -1, specInv, diseqc 0, 
fe_modulation_t modulation,fe_code_rate_t HP_CodeRate, fe_transmit_mode_t 
TransmissionMode,fe_guard_interval_t guardInterval, fe_bandwidth_t bandwidth
Using DVB card "Conexant CX24110 DVB-S"
tuning DVB-S to Freq: 1353000, Pol: H Srate: 27500000, 22kHz: on, LNB:  0
DISEQC SETTING SUCCEDED
Getting frontend status
Not able to lock to the signal on the given frequency
dvb_tune, TUNING FAILED
ERROR, COULDN'T SET CHANNEL  106: DVBIN_CLOSE, close(2), fd=7, COUNT=2
DVBIN_CLOSE, close(1), fd=6, COUNT=1
DVBIN_CLOSE, close(0), fd=5, COUNT=0
Failed to open dvb://ZDF


Lukas