[Mplayer-dvb] CVS broken?

Nico nsabbi at libero.it
Tue May 6 22:56:08 CEST 2003


Hi,

TMF:537833:I0C34D0M16B8T2G32Y0:T:27500:201:202,204:0:0:25728:0:0:0

sets both video and audio pid to 0, that means: no audio and no video! :)
and the freq is wrong (although mplayer will multiply it by 1000 if it's 
lower than 1000000);

make sure to choose only FTA  channels, otherwise mplayer hangs.


Using this last patch

http://mplayerhq.hu/pipermail/mplayer-dev-eng/2003-May/018344.html

things should be better and easier to use (but with a avalid channel)

Anyway, if you still have problems try to run mplayer with -v and attach 
the output, please.

Bye,
		Nico

Harf Zatschler wrote:
> Nico wrote:
> 
>>
>> Hi,
>> if you see
>> http://mplayerhq.hu/pipermail/mplayer-dev-eng/2003-May/018285.html
>>
>> you can use the patch that I sent yesterday night for MPlayer-20030502
>>
>> The previous versions have been broken for some days.
>>
>> I didn't test the pp-stuff though, it might be broken, but it has 
>> nothing to do with dvb-in.
>>
>> Mind that type=CBL is accepted but doesn't work yet (only SAT and TER).
>>
>> Regards,
>>             Nico
> 
> 
> Hi
> That patch seems to try to do exactly what I want!! but it doesn't work 
> for me at the moment -- here's the output maybe you can see what's going 
> wrong. In either case the program just hangs there without any 
> picture/sound until I Ctrl-C it. The card is a Nova-T and  dvbstream and 
> vls can successfully use it.
> 
> ------------------------------------------------------------------------
> 
> [hz3 at penny .mplayer]$ mplayer -dvbin 
> card=1:type=TER:prog=TMF:file=channels.conf:vid=201:aid=202 dvb://TMF
> <snip>
> Playing dvb://TMF
> Unknown protocol 'dvb'
> Unable to open URL: dvb://TMF
> OPEN_DVB: prog=TMF, card=1, type=TER, vid=201, aid=202, file=channels.conf
> code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001
> Released under the GPL.
> Latest version available from http://www.linuxstb.org/
> DIFFERENT TUNING THAN THE PREVIOUS:   -> 0|000537833|2|0|9|0|0|3
> ERROR IN SETTING DMX_FILTER 0: TS file format detected.
> Opened TS demuxer...PROBING UP TO 1000000
> 
> MPlayer interrupted by signal 2 in module: demux_open
> ------------------------------------------------------------------------
> [hz3 at penny .mplayer]$ mplayer dvb://TMF
> <snip>
> Playing dvb://TMF
> Unknown protocol 'dvb'
> Unable to open URL: dvb://TMF
> OPEN_DVB: prog=TMF, card=1, type=SAT, vid=0, aid=0, file=channels.conf
> code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001
> Released under the GPL.
> Latest version available from http://www.linuxstb.org/
> DIFFERENT TUNING THAN THE PREVIOUS:   -> 0|537833000|000000000|0|I
> ERROR IN SETTING DMX_FILTER 0: TS file format detected.
> Opened TS demuxer...PROBING UP TO 1000000
> 
> MPlayer interrupted by signal 2 in module: demux_open
> ------------------------------------------------------------------------
> the relevant channels.conf line:
> TMF:537833:I0C34D0M16B8T2G32Y0:T:27500:201:202,204:0:0:25728:0:0:0
> 
> _______________________________________________
> Mplayer-dvb mailing list
> Mplayer-dvb at mplayerhq.hu
> http://mplayerhq.hu/mailman/listinfo/mplayer-dvb
> 




More information about the MPlayer-dvb mailing list