[Mplayer-dvb] [PATCH] update to dvb-input(2)

[nico]

Il sab, 2003-01-25 alle 16:19, linuxdep ha scritto:

Hopefully yes 

> Hallo,
> 
> understand i it's right,? This patch allow my watch tv with mplayer rc3
> without vdr?
> Then the Mplayer mutate to a tv programm?
> 
> linuxdep
> 
> ----- Original Message -----
> From: "nico" <nsabbi at libero.it>
> To: <Mplayer-dvb at mplayerhq.hu>
> Sent: Saturday, January 25, 2003 3:42 PM
> Subject: [Mplayer-dvb] [PATCH] update to dvb-input(2)
> 
> 
> >
> > Hello,
> > attached is a new patch for Mplayer 0.90rc3 that enables dvb tuning and
> > channel switching.
> >
> > It also includes a couple of last-minute updates respect to the one that
> > I sent to mplayer-dev-eng.
> >
> > It's not ready for the main branch yet, because it still uses an
> > external ts2ps routine in the streaming layer, and uses some
> > 'Argh!-able' code,
> > but it's better than the
> > previous version because:
> > 1) it handles diseqc
> > 2) it tunes much faster
> > 3) it doesn't hang anymore when switching to a channel  with a different
> > resolution/br
> > 4) it handles other (untested) parameters necessary for DVB-T and -C.
> >
> > Yet it still hangs when switching to an encrypted channel.
> >
> > Once again all the code is based on dvbstream (thanks to the authors).
> >
> > How to use it:
> > mplayer -dvbin on=1:[PARAMS]
> >
> > where the possible params are:
> >
> > on=1            required
> > prog=name (taken from a VDR-compatible channels.conf file that must be
> > in your .mplayer dir)
> > freq: frequency, int
> > vid, aid are pids (int)
> > srate: symbol-rate, int
> > pol: char V/H
> > diseqc: int 1-4
> > qam: modulation (16, 32, 64, 128, 256, otherwise default)
> > gi: guard_interval (4, 8, 16, 32, otherwise default)
> > tm: trasmission_mode (2,8 otherwise default)
> > bw: bandwidth(6, 7, 8, otherwise default)
> > cr: coderate (12, 23, 34, 56, 78, -1=auto)
> > tone: 0/1 maybe totally useless
> >
> > e.g.: mplayer -dvbin on=1:prog=Rai1
> >         mplayer -dvbin
> > on=1:freq=11766:srate=27500:pol=V:aid=80:vid=160:diseqc=1
> >
> > I paid attention to avoid to issue a diseqc command if the next channel
> > is on
> > the same satellite as the previous.
> >
> > The channels can be switched up and down with 'h' and 'k' keys (as for
> > the TV).
> >
> >
> > I tested this patch with my Hauppage WinTV Nova-S, so I couldn't test at
> > all certain parameters specific to DVB-T. If you want, use them at your
> > own ris but don't consider me responsible if your card fries.
> >
> > I hope to receive bug-reports.
> >
> > Thanks,
> >
> >                 Nico
> >
> 
> 
> ----------------------------------------------------------------------------
> ----
> 
> 
> > _______________________________________________
> > Mplayer-dvb mailing list
> > Mplayer-dvb at mplayerhq.hu
> > http://mplayerhq.hu/mailman/listinfo/mplayer-dvb
> >
> 
> 
> _______________________________________________
> Mplayer-dvb mailing list
> Mplayer-dvb at mplayerhq.hu
> http://mplayerhq.hu/mailman/listinfo/mplayer-dvb