[MPlayer-DOCS] r23580 - trunk/DOCS/man/en/mplayer.1

diego subversion at mplayerhq.hu
Mon Jun 18 23:24:46 CEST 2007

Author: diego
Date: Mon Jun 18 23:24:45 2007
New Revision: 23580

misc small fixes


Modified: trunk/DOCS/man/en/mplayer.1
--- trunk/DOCS/man/en/mplayer.1	(original)
+++ trunk/DOCS/man/en/mplayer.1	Mon Jun 18 23:24:45 2007
@@ -1762,8 +1762,8 @@ available: dummy, v4l, v4l2, bsdbt848
 .IPs device=<value>
 Specify TV device (default: /dev/\:video0).
-For bsdbt848 driver you can provide both bktr and tuner device names
-separating them with comma, tuner after 
+For the bsdbt848 driver you can provide both bktr and tuner device
+names separating them with a comma, tuner after
 bktr (e.g.\& -tv device=/dev/bktr1,/dev/tuner1).
 .IPs input=<value>
 Specify input (default: 0 (TV), see console output for available inputs).
@@ -2928,7 +2928,7 @@ Specify the vertical frequency range of 
 .B \-monitoraspect <ratio> (also see \-aspect)
 Set the aspect ratio of your monitor or TV screen.
-A value of 0 disables previous monitoraspect setting (e.g.\& in config file).
+A value of 0 disables a previous setting (e.g.\& in the config file).
 Overrides the \-monitorpixelaspect setting if enabled.
 .sp 1
@@ -7539,7 +7539,7 @@ option brd_scale.
 .B b_sensitivity=<any integer greater than 0>
 Adjusts how sensitively vb_strategy=1 detects motion and avoids using
-B-frames (default: 40). 
+B-frames (default: 40).
 Lower sensitivities will result in more B-frames.
 Using more B-frames usually improves PSNR, but too many B-frames can
 hurt quality in high-motion scenes.
@@ -7949,7 +7949,7 @@ details
 .PD 1
-MV & DC are most important, loosing them looks far worse than loosing
+MV & DC are most important, losing them looks far worse than losing
 the AC and the 1. & 2. partition.
 (MV & DC) are far smaller than the 3. partition (AC) meaning that errors
 will hit the AC partition much more often than the MV & DC partitions.
@@ -9886,7 +9886,7 @@ If dvdauthor complains with a message li
 you probably did not enable this option.
-.B "interleaving2\ \ \ "
+.B interleaving2
 Uses a better algorithm to interleave audio and video packets, based on the
 principle that the muxer will always try to fill the stream with the largest
 percentage of free space.

More information about the MPlayer-DOCS mailing list