[MPlayer-DOCS] CVS: main/DOCS/man/en mplayer.1,1.916,1.917

[Diego Biurrun CVS]

CVS change done by Diego Biurrun CVS

Update of /cvsroot/mplayer/main/DOCS/man/en
In directory mail:/var2/tmp/cvs-serv24774/DOCS/man/en

Modified Files:
	mplayer.1 
Log Message:
precise framerate values everywhere
patch by Corey Hickey <bugfood-ml at fatooh dot org>


Index: mplayer.1
===================================================================
RCS file: /cvsroot/mplayer/main/DOCS/man/en/mplayer.1,v
retrieving revision 1.916
retrieving revision 1.917
diff -u -r1.916 -r1.917
--- mplayer.1	19 Mar 2005 13:40:38 -0000	1.916
+++ mplayer.1	19 Mar 2005 16:55:26 -0000	1.917
@@ -4841,14 +4841,14 @@
 The optional parameter (ivtc=1) corresponds to the dr=1 option for the
 detc filter, and should be used with MEncoder but not with MPlayer.
 As with detc, you must specify the correct output framerate (\-ofps
-23.976) when using MEncoder.
+24000/1001) when using MEncoder.
 Further development on ivtc has stopped, as the pullup and filmdint
 filters appear to be much more accurate.
 .
 .TP
 .B pullup[=jl:jr:jt:jb:sb:mp]\ 
 Third-generation pulldown reversal (inverse telecine) filter,
-capable of handling mixed hard-telecine, 24 fps progressive, and 30
+capable of handling mixed hard-telecine, 24000/1001 fps progressive, and 30000/1001
 fps progressive content.
 The pullup filter is designed to be much more robust than detc or
 ivtc, by taking advantage of future context in making its decisions.
@@ -4898,7 +4898,7 @@
 Depending on the source MPEG, you may be fine ignoring this advice, as
 long as you do not see lots of "Bottom-first field" warnings.
 With no options it does normal inverse telecine, and should be used
-together with mencoder \-fps 29.97 \-ofps 23.976.
+together with mencoder \-fps 30000/1001 \-ofps 24000/1001.
 When this filter is used with mplayer, it will result in an uneven
 framerate during playback, but it is still generally better than using
 pp=lb or no deinterlacing at all.
@@ -4974,7 +4974,7 @@
 This filter is intended to find and drop those duplicates and restore the
 original film framerate.
 When using this filter, you must specify \-ofps that is 4/\:5 of the fps of the
-input file (23.976 if the input is 29.97fps).
+input file (24000/1001 if the input is 30000/1001 fps).
 The options are:
 .RSs
 .IPs pass=1|2
@@ -5079,7 +5079,7 @@
 .B telecine[=start]
 Apply 3:2 'telecine' process to increase framerate by 20%.
 This most likely will not work correctly with MPlayer, but it can
-be used with 'mencoder \-fps 29.97 \-ofps 29.97 \-vf telecine'.
+be used with 'mencoder \-fps 30000/1001 \-ofps 30000/1001 \-vf telecine'.
 Both fps options are essential!
 (A/\:V sync will break if they are wrong.)
 The optional start parameter tells the filter where in the telecine
@@ -5531,7 +5531,7 @@
 Specify a frames per second (fps) value for the output file,
 which can be different from that of the source material.
 Must be set for variable fps (ASF, some MOV) and progressive
-(29.97fps telecined MPEG) files.
+(30000/1001 fps telecined MPEG) files.
 .
 .TP
 .B \-ovc <codec name>
@@ -7986,7 +7986,7 @@
 Sets the video bitrate in kbit/s for MPEG-1/2 video.
 .
 .TP
-.B vframerate=<23.976 | 24 | 25 | 29.97 | 30 | 50 | 59.94 | 60 >
+.B vframerate=<24000/1001 | 24 | 25 | 30000/1001 | 30 | 50 | 60000/1001 | 60 >
 Sets the framerate for MPEG-1/2 video.
 This option will be ignored if used with option telecine.
 .